Pasar al contenido principal

DESARROLLO DE MATERIALES MAGNETICOS Y SENSORES PARA APLICACIONES BIOMEDICAS

RTI2018-095856-B-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breath biomarkers with a magnetoelastic contactless gas sensor: a proof of concept

  • Peña Moreno, Álvaro
  • Aguilera, Juan Diego
  • Matatagui Cruz, Daniel
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Horrillo, Carmen
  • Hernando Grande, Antonio
  • Marín Palacios, María Pilar
In the quest for effective gas sensors for breath analysis, magnetoelastic resonance-based gas sensors (MEGSs) are remarkable candidates. Thanks to their intrinsic contactless operation, they can be used as non-invasive and portable devices. However, traditional monitoring techniques are bound to slow detection, which hinders their application to fast bio-related reactions. Here we present a method for real-time monitoring of the resonance frequency, with a proof of concept for real-time monitoring of gaseous biomarkers based on resonance frequency. This method was validated with a MEGS based on a Metglass 2826 MB microribbon with a polyvinylpyrrolidone (PVP) nanofiber electrospun functionalization. The device provided a low-noise (RMS = 1.7 Hz), fast (<2 min), and highly reproducible response to humidity (Delta f = 46-182 Hz for 17-95% RH), ammonia (Delta f = 112 Hz for 40 ppm), and acetone (Delta f = 44 Hz for 40 ppm). These analytes are highly important in biomedical applications, particularly ammonia and acetone, which are biomarkers related to diseases such as diabetes. Furthermore, the capability of distinguishing between breath and regular air was demonstrated with real breath measurements. The sensor also exhibited strong resistance to benzene, a common gaseous interferent in breath analysis.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Ultrasensitive NO_(2 )gas sensor with insignificant NH3-interference based on a few-layered mesoporous graphene

  • Matatagui Cruz, Daniel
  • López Sánchez, Jesús
  • Peña Moreno, Álvaro
  • Serrano, Aída
  • Del Campo, Adolfo
  • Rodríguez De La Fuente, Óscar
  • Carmona Tejero, Noemí
  • Navarro Palma, Elena
  • Marín Palacios, María Pilar
  • Horrillo, María del Carmen
Few-layered mesoporous graphene (FLMG) is employed as a sensing material to develop an innovative and high-sensitivity room temperature NO_(2) sensor through a simple manufacturing process. For this purpose, sensing material is optimized at 100 min by a high-energy milling process where natural graphite is used as a precursor: it is an inexpensive, sustainable and suitable active material. The large number of defects created and the enhanced degree of mesoporosity produced during the milling process determine the physical principles of operation of the designed device. NO_(2) gas sensing tests reveal an improved and selective performance with a change in resistance of ∼16 % at 0.5 ppm under ultraviolet photo-activation, establishing a detection limit around ∼25 ppb. Interestingly, the response of the developed sensor to humidity is independent in the measured range (0–33 % relative humidity at 25 °C) and the dependency to the presence of NH3 is rather poor as well (∼1.5 % at 50 ppm).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Portable low-cost electronic nose based on surface acoustic wave sensors for the detection of BTX vapors in air

  • Matatagui, Daniel
  • Bahos, Fabio Andrés
  • Gràcia Tortadès, Isabel
  • Horrillo, Carmen
A portable electronic nose based on surface acoustic wave (SAW) sensors is proposed in this work to detect toxic chemicals, which have a great potential to threaten the surrounding natural environment or adversely affect the health of people. We want to emphasize that ferrite nanoparticles, decorated (Au, Pt, Pd) and undecorated, have been used as sensitive coatings for the first time in these types of sensors. Furthermore, the proposed electronic nose incorporates signal conditioning and acquisition and transmission modules. The electronic nose was tested to low concentrations of benzene, toluene, and xylene, exhibiting excellent performance in terms of sensitivity, selectivity, and response time, indicating its potential as a monitoring system that can contribute to the detection of toxic compounds., This work was supported by the Fundación General CSIC via Programa ComFuturo and the Spanish Ministry of Science, Innovation and Universities under the projects RTI2018-095856-B-C22 (AEI/FEDER) and TEC2016-79898-C6 (AEI/FEDER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrasensitive NO2 gas sensor with insignificant NH3-interference based on a few-layered mesoporous graphene

  • Matatagui, Daniel
  • López-Sánchez, Jesús
  • Peña, Álvaro
  • Serrano Rubio, Aída
  • Del Campo, Adolfo
  • Rodríguez de la Fuente, Óscar
  • Carmona, N.
  • Navarro, Elena
  • Marín, Pilar
  • Horrillo, Carmen
9 páginas, 6 figuras color., Few-layered mesoporous graphene (FLMG) is employed as a sensing material to develop an innovative and high-sensitivity room temperature NO sensor through a simple manufacturing process. For this purpose, sensing material is optimized at 100 min by a high-energy milling process where natural graphite is used as a precursor: it is an inexpensive, sustainable and suitable active material. The large number of defects created and the enhanced degree of mesoporosity produced during the milling process determine the physical principles of operation of the designed device. NO gas sensing tests reveal an improved and selective performance with a change in resistance of ∼16 % at 0.5 ppm under ultraviolet photo-activation, establishing a detection limit around ∼25 ppb. Interestingly, the response of the developed sensor to humidity is independent in the measured range (0–33 % relative humidity at 25 °C) and the dependency to the presence of NH is rather poor as well (∼1.5 % at 50 ppm)., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects RTI2018-095856-B-C22 (AEI/ FEDER), RTI2018-095856-B-C21 (AEI/FEDER), RTI2018-095303-AC52, MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015- 67557-C2-1-P, and PIE 2010-6OE-013. The Comunidad de Madrid by S2018/NMT-4321. D. M. acknowledges the financial support from the Fundacion ´ General CSIC via Programa ComFuturo. A. S. acknowledges the financial support from the Comunidad de Madrid for an “Atraccion ´ de Talento Investigador” contract (no. 2017-t2/IND5395)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eco-Friendly Disposable WS2 Paper Sensor for Sub-ppm NO2 Detection at Room Temperature

  • Matatagui, Daniel
  • Cruz, Carlos
  • Carrascoso, Félix
  • Al-Enizi, Abdullah M.
  • Nafady, Ayman
  • Castellanos-Gómez, Andrés
  • Horrillo, Carmen
12 páginas, 8 figuras, We developed inexpensive and disposable gas sensors with a low environmental footprint. This approach is based on a biodegradable substrate, paper, and features safe and nontoxic electronic materials. We show that abrasion-induced deposited WS nanoplatelets on paper can be employed as a successful sensing layer to develop high-sensitivity and selective sensors, which operate even at room temperature. Its performance is investigated, at room temperature, against NO exposure, finding that the electrical resistance of the device drops dramatically upon NO adsorption, decreasing by ~42% (~31% half a year later) for 0.8 ppm concentration, and establishing a detection limit around~2 ppb (~3 ppb half a year later). The sensor is highly selective towards NO gas with respect to the interferents NH and CO, whose responses were only 1.8% (obtained for 30 ppm) and 1.5% (obtained for 8 ppm), respectively. Interestingly, an improved response of the developed sensor under humid conditions was observed (tested for 25% relative humidity at 23 C). The high-performance, in conjunction with its small dimensions, low cost, operation at room temperature, and the possibility of using it as a portable system, makes this sensor a promising candidate for continuous monitoring of NO on-site., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement n◦755655, ERC-StG 2017 project 2 D-TOPSENSE) and the Ministry of Science and Innovation (Spain) through the project PID2020-115566 RB-I00 and RTI2018-095856-B-C22 (AEI/FEDER). The authors extend their sincere appreciation to the Distinguished Scientist Fellowship Program (DSFP) at King Saud University for funding of this work. D. M. acknowledges the financial support from the Fundación General CSIC via Programa ComFuturo.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An Artificial Olfactory System for Toxic Compounds Classification using Machine Learning Techniques

  • Cruz, Carlos
  • Aleixandre, Manuel
  • Matatagui, Daniel
  • Horrillo, Carmen
6 páginas, 6 figuras, The long-term exposure to nitrogen dioxide produces harmful effects for humans and any living being. Thus, in security applications, sensor arrays are required for detecting nitrogen dioxide by interfering gas classification. In this work, a compact and intelligent electronic nose (e-nose) based on a Shear-Horizontal Surface Acoustic Wave (SH-SAW) sensor array is proposed for sensing, classifying, and calibrating toxic chemicals. Different carbon-based nanostructured materials are deposited as sensitive layers providing excellent outcomes by mass and elastic changes in this type of sensors. The HS-SAW sensors achieve a high sensitivity, fast response, and reproducibility to different toxic gases such as nitrogen dioxide, carbon monoxide, ammonia, benzene and acetone. The gas flows were controlled by an automated system that consists of four mass flow controllers to obtain the desired concentrations. The e-nose provides an efficient performance with supervised machine learning techniques. Outcomes indicate that Linear Discrimination Analysis (LDA) performs a 90% precise discrimination on test dataset and provides a clear discrimination of NO with interfering toxic compounds. On the other hand, K-Nearest Neighbors (KNN) and Logistic Regression (LR) also achieve excellent classification scores (95% and 79% respectively). Decision surface for toxic compounds of different classification algorithms were also performed achieving good classification. An evaluation and comparison of the prediction methods: Partial Least Square (PLS), Artificial Neural Networks (ANNs) and cascade of ANNs are accomplished. The ANN cascade results show that this technique is an excellent candidate for an accurate prediction and classification of NO. Therefore, the designed and validated e-nose is a promising on-line tool of analysis for environmental applications., Spanish Ministry of Science and Innovation for financing the project RTI2018-095856-B-C22 (AEI/FEDER)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon SH-SAW-Based Electronic Nose to Discriminate and Classify Sub-ppm NO2

  • Cruz, Carlos
  • Matatagui, Daniel
  • Ramírez, Cristina
  • Badillo-Ramírez, Isidro
  • De la O-Cuevas, Emmanuel
  • Saniger, J.M.
  • Horrillo, Carmen
13 páginas, 9 figuras, 2 tablas, In this research, a compact electronic nose (e-nose) based on a shear horizontal surface acoustic wave (SH-SAW) sensor array is proposed for the NO2 detection, classification and discrimination among some of the most relevant surrounding toxic chemicals, such as carbon monoxide (CO), ammonia (NH3), benzene (C6H6) and acetone (C3H6O). Carbon-based nanostructured materials (CBNm), such as mesoporous carbon (MC), reduced graphene oxide (rGO), graphene oxide (GO) and polydopamine/reduced graphene oxide (PDA/rGO) are deposited as a sensitive layer with con-trolled spray and Langmuir–Blodgett techniques. We show the potential of the mass loading and elastic effects of the CBNm to enhance the detection, the classification and the discrimination of NO2 among different gases by using Machine Learning (ML) techniques (e.g., PCA, LDA and KNN). The small dimensions and low cost make this analytical system a promising candidate for the on-site discrimination of sub-ppm NO2., Spanish Ministry of Science and Innovation for financing the project RTI2018-095856-B-C22 (AEI/FEDER). D.M. acknowledges the financial support from the Fundación General CSIC via Programa ComFuturo. C.R acknowledge the funding from IJCI-2017-34724 grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-Time Monitoring of Breath Biomarkers with A Magnetoelastic Contactless Gas Sensor: A Proof of Concept

  • Peña, Álvaro
  • Aguilera, Juan Diego
  • Matatagui, Daniel
  • Presa, Patricia de la
  • Horrillo, Carmen
  • Hernando, Antonio
  • Marín, Pilar
17 páginas, 12 figuras, 1 tabla, In the quest for effective gas sensors for breath analysis, magnetoelastic resonance-based gas sensors (MEGSs) are remarkable candidates. Thanks to their intrinsic contactless operation, they can be used as non-invasive and portable devices. However, traditional monitoring techniques are bound to slow detection, which hinders their application to fast bio-related reactions. Here we present a method for real-time monitoring of the resonance frequency, with a proof of concept for real-time monitoring of gaseous biomarkers based on resonance frequency. This method was validated with a MEGS based on a Metglass 2826 MB microribbon with a polyvinylpyrrolidone (PVP) nanofiber electrospun functionalization. The device provided a low-noise (RMS = 1.7 Hz), fast (<2 min), and highly reproducible response to humidity (Δf = 46–182 Hz for 17–95% RH), ammonia (Δf = 112 Hz for 40 ppm), and acetone (Δf = 44 Hz for 40 ppm). These analytes are highly important in biomedical applications, particularly ammonia and acetone, which are biomarkers related to diseases such as diabetes. Furthermore, the capability of distinguishing between breath and regular air was demonstrated with real breath measurements. The sensor also exhibited strong resistance to benzene, a common gaseous interferent in breath analysis., Author A.P. received funding from grant PRE2019-0875001234, Ministerio de Ciencia e Innovación (MCI), Spain. D.M. received funding from Comfuturo, Consejo Superior de Investigaciones Científicas, Spain. Authors A.P., D.M., P.M. and C.H. received funding from projects RTI2018-095856- B-C21 and RTI2018-095856-B-C22, Ministerio de Ciencia e Innovación, Spain. A.P. and P.M. received funding S2018/NMT-4321, Comunidad de Madrid. J.D.A received funding from Next Generation EU, Ministerio de Trabajo y Economía, Comunidad de Madrid, Spain, Programa Investigo from grant 96-UCM-INV.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of Y3Fe5O12 based layered structures for quasi-optic spin wave elements

  • Fragoso-Mora, José R.
  • Kolokoltsev, Oleg
  • Ordoñez-Romero, César L.
  • Qureshi, Naser
  • Martynyuk, Olexander E.
  • Horrillo, Carmen
  • Matatagui, Daniel
7 páginas, 7 figuras, We present theoretical and experimental results on the losses and confinement of spin waves (SW) in a Ferro- magnetic/Normal Metal/Air/Ferrite multilayer structure. The above structure can be used for the creation of a desired topology of static magnetic field in a thin ferrite film, used as SW waveguide. It is shown that a screening Normal Metal (NMe) layer, inserted between SW waveguide and ferromagnetic (FM) layer, significantly de- creases the SW losses caused by a lossy FM. It is also shown that the SW amplitude increases within the air gap (d) between a Ferrite film and NMe layer, when the gap satisfies the relation kd = 1, where k is SW wavenumber. The power flow density at Ferrite/Air interface is maximal when d is equal to a quarter wavelength of SW., This research was funded by the Ministry of Science and Innovation (Spain) through project number RTI2018-095856-B-C22, Universidad Nacional Autónoma de México through the projects PAPIIT grant number AG100521 and IG100521, and CONACyT grant number A1-S-22695. D.M. acknowledges the financial support from the Fundación General CSIC via Programa ComFuturo. J.F. acknowledges the scholar- ship from CONACyT., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Response of a SAW Sensor Array Based on Nanoparticles for Measuring Ammonia in the Environment

  • Matatagui, Daniel
  • Gràcia Tortadès, Isabel
  • Horrillo, Carmen
SENSORNETS 2020 - 9th International Conference on Sensor Networks, Valletta - Malta February 28 - 29, 2020 4 páginas, 6 figuras, 1 tabla, Four surface acoustic waves (SAW) sensors based on sensitive layers of Fe2O3 nanoparticles, pure and combined with noble metals nanoparticles, composed an array sensor to measure ammonia in the environment. The sensor array was tested with nanostructured sensitive layers, which detected the changes of the elastic properties induced by ammonia interaction. The sensor with pure Fe2O3 nanoparticles exposed to 50 ppm of ammonia showed no significant effect, however the sensors with Fe2O3 nanoparticles combined with Au, Pt and Pd nanoparticles responded to these concentrations of this gas, which is so dangerous for the environment and the health, with a high sensitivity., This work has been supported by the Fundación General CSIC via Program ComFuturo and the Spanish Ministry of Science, Innovation and Universities under the projects RTI2018-095856-B- C22 (AEI/FEDER) and TEC2016-79898-C6 (AEI/FEDER). This research has used the Spanish ICTS Network MICRONANOFABS (partially funded by MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breath biomarkers using magnonic wireless sensor based on magnetic nanoparticles

  • Aguilera, J.D.
  • Arranz, D.
  • Peña, A.
  • Horrillo, Carmen
  • De la Presa, D.
  • Matatagui, D.
8 páginas, 6 figuras, In this paper, an innovative device with gas remote-sensing capability is proposed, which is based on the interaction between magnetic nanoparticles and gases associated with exhaled breath biomarkers that can have a metabolic origin. Magnetite (Fe₃O₄) nanoparticles of around 30 nm have been used. The gas molecules adsorbed on surface modulate the magnetization of the nanoparticles and magnetostatic surface spin waves (MSSW) propagated on an yttrium iron garnet (YIG) thin film are used to detect this modulation by the induced frequency shift. The optimization of the remote gas sensor has been carried out through simulations of a magnetic model. Simulations show the feasibility of developing a high-performance remote sensor by encapsulating the nano- structures in a polytetrafluoroethylene (PTFE) tube and detecting part per million changes in their magnetiza- tion. The results show the possibility of developing new, inexpensive, reusable, contactless magnetic gas sensors employing spin waves as transductor. The developed sensor shows a high sensitivity and selectivity to concen- trations as low as 50 ppm of different breath biomarkers., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects RETOS RTI2018-095856-B, RTI2018-095856-B-C22 (AEI/FEDER), RTI2018-095856-B-C21 (AEI/FEDER), PID2021-123112OB-C21 (AEI/FEDER), PDC2022-133039-I00 (AEI/FEDER), Comunidad de Madrid (NANOMAGCOST-CM S2018/NMT-4321 and COST Action CA21101. J.D.A received funding from Next Generation EU, Ministerio de Trabajo y Economía, Comunidad de Madrid, Spain, Programa Investigo from grant 96-UCM-INV. D. M. acknowledges financial support from the Spanish Ministry of Science and Innovation (MCI) through the Ramóon y Cajal grant RYC2021-031166-I. A. P. acknowledges funding from grant PRE2019-0875001234 (MCI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Modeling and simulation of a magnonic gas sensor to detected diseases in human breath

  • Pozo-Gómez, M.
  • Aguilera-Martín, J.D.
  • De la Presa, P.
  • Cruz, C.
  • Marín, P.
  • Matatagui, D
  • Horrillo, Carmen
2021 13th Spanish Conference on Electron Devices (CDE), 09-11 June 2021, Sevilla, Spain, A theoretical study of the interaction between magnetostatic surface spin waves (MSWs) and magnetic nanoparticles (MNPs) is presented. The propagation of the MSW occurs on an yttrium iron garnet (YIG) thin film, and the MNPs are encapsulated in a tube. The operation of the sensor is based on the fact that a gas interacting with the nanostructures produces a change in their magnetization, and this, in turn, produces a measurable change in MSW propagation. The gas sensor structure is studied and characterized theoretically, through simulations. These simulations are also used in order to optimize the device through changes in the geometry, reaching sensitivities of 2 ppm in the magnetization of the sensitive material., 10.13039/501100004837-Spanish Ministry of Science and Innovation (Grant Number: RTI2018-095856-B-C22 (AEI/FEDER),RTI2018-095856-B-C21), Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breath biomarkers using magnonic wireless sensor based on magnetic nanoparticles

  • Aguilera Martín, Juan Diego
  • Arranz López, Daniel
  • Peña Moreno, Álvaro
  • Marín Palacios, María Pilar
  • Horrillo, M.C.
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Matatagui Cruz, Daniel
In this paper, an innovative device with gas remote-sensing capability is proposed, which is based on the interaction between magnetic nanoparticles and gases associated with exhaled breath biomarkers that can have a metabolic origin. Magnetite (Fe₃O₄) nanoparticles of around 30 nm have been used. The gas molecules adsorbed on surface modulate the magnetization of the nanoparticles and magnetostatic surface spin waves (MSSW) propagated on an yttrium iron garnet (YIG) thin film are used to detect this modulation by the induced frequency shift. The optimization of the remote gas sensor has been carried out through simulations of a magnetic model. Simulations show the feasibility of developing a high-performance remote sensor by encapsulating the nanostructures in a polytetrafluoroethylene (PTFE) tube and detecting part per million changes in their magnetization. The results show the possibility of developing new, inexpensive, reusable, contactless magnetic gas sensors employing spin waves as transductor. The developed sensor shows a high sensitivity and selectivity to concentrations as low as 50 ppm of different breath biomarkers.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Optimization of Y3Fe5O12 based layered structures for quasi-optic spin wave elements

  • Fragoso Mora, José R.
  • Kolokoltsev, Oleg
  • Ordoñez Romero, Cesar L.
  • Qureshi, Naser
  • Martynyuk, Olexander E.
  • Horrillo, María del Carmen
  • Matatagui Cruz, Daniel
We present theoretical and experimental results on the losses and confinement of spin waves (SW) in a Ferromagnetic/Normal Metal/Air/Ferrite multilayer structure. The above structure can be used for the creation of a desired topology of static magnetic field in a thin ferrite film, used as SW waveguide. It is shown that a screening Normal Metal (NMe) layer, inserted between SW waveguide and ferromagnetic (FM) layer, significantly decreases the SW losses caused by a lossy FM. It is also shown that the SW amplitude increases within the air gap (d) between a Ferrite film and NMe layer, when the gap satisfies the relation kd = 1, where k is SW wavenumber. The power flow density at Ferrite/Air interface is maximal when d is equal to a quarter wavelength of SW.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Optimization of multilayer graphene-based gas sensors by ultraviolet photoactivation

  • Peña Moreno, Álvaro
  • Matatagui Cruz, Daniel
  • Ricciardella, Filiberto
  • Sacco, Leandro
  • Vollebregt, Sten
  • Otero, Daniel
  • López Sánchez, Jesús
  • Marín Palacios, María Pilar
  • Horrillo, Mari Carmen
Nitrogen dioxide (NO2) is a potential hazard to human health at low concentrations, below one part per million (ppm). NO2 can be monitored using gas sensors based on multi-layered graphene operating at ambient temperature. However, reliable detection of concentrations on the order of parts per million and lower is hindered by partial recovery and lack of reproducibility of the sensors after exposure. We show how to overcome these longstanding problems using ultraviolet (UV) light. When exposed to NO2, the sensor response is enhanced by 290 % − 550 % under a 275 nm wavelength light emitting diode irradiation. Furthermore, the sensor’s initial state is completely restored after exposure to the target gas. UV irradiation at 68 W/m2 reduces the NO2 detection limit to 30 parts per billion (ppb) at room temperature. We investigated sensor performance optimization for UV irradiation with different power densities and target gases, such as carbon oxide and ammonia. Improved sensitivity, recovery, and reproducibility of UV-assisted graphene-based gas sensors make them suitable for widespread environmental applications.