Pasar al contenido principal

DESARROLLO DE MATERIALES MAGNETICOS Y SENSORES PARA APLICACIONES BIOMEDICAS

RTI2018-095856-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Modulation of crystallinity through radiofrequency electromagnetic fields in PLLA/magnetic nanoparticles composites: A proof of concept

  • Multigner, Marta
  • Morales, Irene
  • Giacomone, Fernando
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Benavente, Rosario
  • Torres, Belén
  • Mantovani, Diego
  • Rams, Joaquín
To modulate the properties of degradable implants from outside of the human body represents a major challenge in the field of biomaterials. Polylactic acid is one of the most used polymers in biomedical applications, but it tends to lose its mechanical properties too quickly during degradation. In the present study, a way to reinforce poly-L lactic acid (PLLA) with magnetic nanoparticles (MNPs) that have the capacity to heat under radiofrequency electromagnetic fields (EMF) is proposed. As mechanical and degradation properties are related to the crystallinity of PLLA, the aim of the work was to explore the possibility of modifying the structure of the polymer through the heating of the reinforcing MNPs by EMF within the biological limit range f center dot H < 5 center dot x 10_(9) Am_(-1) center dot s_(-1). Composites were prepared by dispersing MNPs under sonication in a solution of PLLA. The heat released by the MNPs was monitored by an infrared camera and changes in the polymer were analyzed with differential scanning calorimetry and nanoindentation techniques. The crystallinity, hardness, and elastic modulus of nanocomposites increase with EMF treatment.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Generation of defective few-layered graphene mesostructures by high-energy ball milling and their combination with FeSiCuNbB microwires for reinforcing microwave absorbing properties

  • López Sánchez, Jesús
  • Peña Moreno, Álvaro
  • Serrano, Aída
  • Del Campo, Adolfo
  • Rodríguez De La Fuente, Óscar
  • Carmona Tejero, Noemí
  • Matatagui Cruz, Daniel
  • Horrillo, María del Carmen
  • Rubio Zazo, Juan
  • Navarro Palma, Elena
  • Marín Palacios, María Pilar
Defective few-layered graphene mesostructures (DFLGMs) are produced from graphite flakes by high-energy milling processes. We obtain an accurate control of the generated mesostructures, as well as of the amount and classification of the structural defects formed, providing a functional material for microwave absorption purposes. Working under far-field conditions, competitive values of minimum reflection loss coefficient (RL_(min)) = −21.76 dB and EAB = 4.77 dB are achieved when DFLGMs are immersed in paints at a low volume fraction (1.95%). One step forward is developed by combining them with the excellent absorption behavior that offers amorphous Fe_(73.5)Si_(13.5)B_(9)Cu_(1)Nb microwires (MWs), varying their filling contents, which are below 3%. We obtain a RLmin improvement of 47% (−53.08 dB) and an EAB enhancement of 137% (4 dB) compared to those obtained by MW-based paints. Furthermore, a f_(min) tunability is demonstrated, maintaining similar RL_(min) and EAB values, irrespective of an ideal matching thickness. In this scenario, the Maxwell-Garnet standard model is valid, and dielectric losses mainly come from multiple reflections, interfacial and dielectric polarizations, which greatly boost the microwave attenuation of MWs. The present concept can remarkably enhance not only the MW attenuation but can also apply to other microwave absorption architectures of technological interest by adding low quantities of DFLGMs.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breath biomarkers with a magnetoelastic contactless gas sensor: a proof of concept

  • Peña Moreno, Álvaro
  • Aguilera, Juan Diego
  • Matatagui Cruz, Daniel
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Horrillo, Carmen
  • Hernando Grande, Antonio
  • Marín Palacios, María Pilar
In the quest for effective gas sensors for breath analysis, magnetoelastic resonance-based gas sensors (MEGSs) are remarkable candidates. Thanks to their intrinsic contactless operation, they can be used as non-invasive and portable devices. However, traditional monitoring techniques are bound to slow detection, which hinders their application to fast bio-related reactions. Here we present a method for real-time monitoring of the resonance frequency, with a proof of concept for real-time monitoring of gaseous biomarkers based on resonance frequency. This method was validated with a MEGS based on a Metglass 2826 MB microribbon with a polyvinylpyrrolidone (PVP) nanofiber electrospun functionalization. The device provided a low-noise (RMS = 1.7 Hz), fast (<2 min), and highly reproducible response to humidity (Delta f = 46-182 Hz for 17-95% RH), ammonia (Delta f = 112 Hz for 40 ppm), and acetone (Delta f = 44 Hz for 40 ppm). These analytes are highly important in biomedical applications, particularly ammonia and acetone, which are biomarkers related to diseases such as diabetes. Furthermore, the capability of distinguishing between breath and regular air was demonstrated with real breath measurements. The sensor also exhibited strong resistance to benzene, a common gaseous interferent in breath analysis.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Ultrasensitive NO_(2 )gas sensor with insignificant NH3-interference based on a few-layered mesoporous graphene

  • Matatagui Cruz, Daniel
  • López Sánchez, Jesús
  • Peña Moreno, Álvaro
  • Serrano, Aída
  • Del Campo, Adolfo
  • Rodríguez De La Fuente, Óscar
  • Carmona Tejero, Noemí
  • Navarro Palma, Elena
  • Marín Palacios, María Pilar
  • Horrillo, María del Carmen
Few-layered mesoporous graphene (FLMG) is employed as a sensing material to develop an innovative and high-sensitivity room temperature NO_(2) sensor through a simple manufacturing process. For this purpose, sensing material is optimized at 100 min by a high-energy milling process where natural graphite is used as a precursor: it is an inexpensive, sustainable and suitable active material. The large number of defects created and the enhanced degree of mesoporosity produced during the milling process determine the physical principles of operation of the designed device. NO_(2) gas sensing tests reveal an improved and selective performance with a change in resistance of ∼16 % at 0.5 ppm under ultraviolet photo-activation, establishing a detection limit around ∼25 ppb. Interestingly, the response of the developed sensor to humidity is independent in the measured range (0–33 % relative humidity at 25 °C) and the dependency to the presence of NH3 is rather poor as well (∼1.5 % at 50 ppm).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct and inverse spin Hall effects: Zeeman energy

  • Hernando, Antonio
  • García García-Tuñón, Miguel Ángel
  • Gálvez, F.
  • Guinea, Francisco
  • AMPHIBIAN Project ID:720853
It is shown that magnetic forces as the force exerted on electron spins at rest, account for both the transverse spin imbalance typical of spin Hall effect and the transverse charge imbalance associated with pure spin currents (inverse spin Hall effect). Considering that for stationary currents the laboratory reference frame, and those for which the spin up and spin down carriers are at rest, are inertial systems one can easily find the forces exerted by the lattice on both spin sub-bands, as well as the force between sub-bands., The authors are indebted to P. Echenique, J. Hirsch, V. Golovach, A. Arnau and J. M. Rojo for many fruitful discussions. This work has been supported by the Spanish Ministry of Innovation, Science and Technology and Spanish Ministry of Economy and Competitiveness through Research Projects MAT2015-67557-C2-1-P, MAT2017-86450-C4-1-R S2013/MIT-2850 NANOFRONTMAG, RTI2018-095856-B-C21, by the European Commission AMPHIBIAN (H2020-NMBP-2016-720853) and by the Comunidad de Madrid S2018/NMT-4321 NANOMAGCOST-CM., Peer reviewed, preprint
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin imbalance of charge carriers induced by an electric current

  • Hernando, Antonio
  • Gálvez, Fernando
  • García García-Tuñón, Miguel Ángel
  • Guinea, Francisco
  • AMPHIBIAN Project ID:720853
[EN] We analyze the contribution of the inhomogeneous magnetic field induced by an electrical current to the spin Hall effect in metals. The Zeeman coupling between the field and the electron spin leads to a spin dependent force, and to spin accumulation at the edges. We compare the effect of this relativistic correction to the electron dynamics to the features induced by the spin-orbit interaction. The effect of current induced magnetic fields on the spin Hall effect can be comparable to the extrinsic contribution from the spin-orbit interaction, although it does not require the presence of heavy elements with a strong spin-orbit interaction., This work was supported by the Spanish Ministry of Innovation, Science and Technology and Spanish Ministry of Economy and Competitiveness through Research Projects MAT2015-67557-C2-1-P, MAT2017-86450-C4-1-R, S2013/MIT-2850 NANOFRONTMAG and by the European Commission AMPHIBIAN (H2020-NMBP-2016-720853)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Induction heating in nanoparticle impregnated zeolite

  • Morales, Irene
  • Muñoz, Marta
  • Costa, Catia S.
  • Alonso, José M.
  • Silva, João Miguel
  • Multigner, Marta
  • Quijorna, Mario
  • Ribeiro, M. Rosário
  • Presa, Patricia de la
The ultra-stable Y (H-USY) zeolite is used as catalyst for the conversion of plastic feedstocks into high added value products through catalytic cracking technologies. However, the energy requirements associated with these processes are still high. On the other hand, induction heating by magnetic nanoparticles has been exploited for different applications such as cancer treatment by magnetic hyperthermia, improving of water electrolysis and many other heterogeneous catalytic processes. In this work, the heating efficiency of γ-Fe2O3 nanoparticle impregnated zeolites is investigated in order to determine the potential application of this system in catalytic reactions promoted by acid catalyst centers under inductive heating. The γ-Fe2O3 nanoparticle impregnated zeolite has been investigated by X-ray diffraction, electron microscopy, ammonia temperature program desorption (NH3-TPD), H2 absorption, thermogravimetry and dc and ac-magnetometry. It is observed that the diffusion of the magnetic nanoparticles in the pores of the zeolite is possible due to a combined micro and mesoporous structure and, even when fixed in a solid matrix, they are capable of releasing heat as efficiently as in a colloidal suspension. This opens up the possibility of exploring the application at higher temperatures., This research was funded by Ministerio de Ciencia e Innovación grant number RTI2018-095856-B-C21, MAT2015-66334-C3-3-R and RTI2018-096391-B-C31, Comunidad de Madrid Projects grant number P2018/NMT-4321 and CM-S2018/NMT-4411; Ayudas a la Movilidad PDI URJC 2018 and PDI URJC 2019 and Fundação para a Ciência e Tecnologia (Project UID/QUI/00100/2019 and FCT-CATSUS grant: PD/BD/12862/2017). The authors also acknowledge the technical support given by Fernando Giacomone financed by Spanish Ministry of Science and Innovation, PTA2015-10497-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of preparation methods on magnetic propeties of stoichiometric zinc ferrite

  • Cobos, Miguel Ángel
  • Presa, Patricia de la
  • Llorente, Irene
  • García Escorial, Asunción
  • Hernando, Antonio
  • Jiménez, José Antonio
Synthesis and processing methods can have a significant influence on the physical properties of spinel zinc ferrite since it can produce microstructures characterized by different microstructural parameter such as the arrangement of the ions, lattice parameter, crystallite size and lattice strains (or microstrain). In this work, it has been evaluated the magnetic properties of samples prepared by ceramic synthesis, sol-gel and a third one provided by a ceramic powder supplier. Later, the synthesized samples have been ball-milled for 50 h and compared with a sample prepared by mechanochemical synthesis during 150 h. X-ray powder diffraction (XRD) analysis, performed in order to understand the relation between microstructure and magnetic properties, showed that these four materials are characterized by different values of the microstructural parameters (lattice constant, inversion degree and crystallite size). It was concluded that cation inversion is the most important parameters that can be effective in the deviation of the magnetic properties of zinc ferrite from the properties of the bulk form. Finally, the magnetization curves for the samples milled for 50 h were very similar to the sample prepared by mechanochemical, as expected from the similar microstructural parameters obtained from their XRD patterns. The inversion degree for these samples varied from 0.56 to 0.61 with saturation magnetization at 5 K around 79.0 emu/g. Although structural and chemical properties of this material can be selected by a proper choice of the preparation method, it is also possible to obtain the same microestructural and magnetic properties by a thermomechanic process, regardless of the synthesis method used., This research was funded by Spanish Ministry of Science and Innovation (MINECO) grant numbers RTI2018-095856-B-C21 and PTA2015-10497-I, and by Madrid Region grant number S2018/NMT-4381-MAT4.0-CM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of the Length of Fe73.5Si13.5Nb3Cu1B9 Microwires to Be Used for Magnetic and Microwave Absorbing Purposes

  • Gueye,Papa Gorgui Birame
  • López-Sánchez, Jesús
  • Navarro, Elena
  • Serrano Rubio, Aída
  • Marín, Pilar
A combination of high-energy ball milling, vacuum filtering, and sedimentation processes has been demonstrated to be a useful approach to reduce, in a controlled way, the length of as-cast Fe73.5Si13.5Nb3Cu1B9 amorphous magnetic microwires (MWs) and annealed material at 550 °C in nitrogen conditions. Homogeneous compositional microstructures with fairly narrow size distributions between 1300 and 11.7 μm are achieved, exhibiting tunable response as a soft magnetic material and as a microwave absorber. From the magnetic perspective, the soft magnetic character is increased with smaller length of the MWs, whereas the remanence has the opposite behavior mainly due to the structural defects and the loss of the shape anisotropy. From the microwave absorption perspective, a novel potential applicability is tested in these refined microstructures. This innovation consists of coatings based on commercial paints with a filling percentage of 0.55% of MWs with different lengths deposited on metallic sheets. Large attenuation values around −40 dB are obtained in narrow spectral windows located in the GHz range, and their position can be varied by combining different optimized lengths of MW. As an example of this powerful mechanism for absorbing microwaves at specific frequencies, MW lengths of 2 mm and 50 μm are chosen, where precise tailoring of the minimum reflection loss (RL) is obtained in a range between 8.85 and 13.25 GHz. To confirm these experimental results, an effective medium standard model proposed for electrical permittivity is used. Experimental and theoretical results are consistent and these novel composites are also proposed as a feasible candidate for designing frequency-selective microwave absorbers on demand, with low filling percentages and high absorption intensity values., The authors acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities under the projects RTI2018-095856-B-C21, MAT2017-86540-C4-1-R, and RTI2018-095303-A-C52 and from Comunidad de Madrid NANOFRONTMAG S2013/MIT-2850 and NANOMAGCOST S2018/NMT-4321. A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (no. 2017-t2/IND5395)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrasensitive NO2 gas sensor with insignificant NH3-interference based on a few-layered mesoporous graphene

  • Matatagui, Daniel
  • López-Sánchez, Jesús
  • Peña, Álvaro
  • Serrano Rubio, Aída
  • Del Campo, Adolfo
  • Rodríguez de la Fuente, Óscar
  • Carmona, N.
  • Navarro, Elena
  • Marín, Pilar
  • Horrillo, Carmen
9 páginas, 6 figuras color., Few-layered mesoporous graphene (FLMG) is employed as a sensing material to develop an innovative and high-sensitivity room temperature NO sensor through a simple manufacturing process. For this purpose, sensing material is optimized at 100 min by a high-energy milling process where natural graphite is used as a precursor: it is an inexpensive, sustainable and suitable active material. The large number of defects created and the enhanced degree of mesoporosity produced during the milling process determine the physical principles of operation of the designed device. NO gas sensing tests reveal an improved and selective performance with a change in resistance of ∼16 % at 0.5 ppm under ultraviolet photo-activation, establishing a detection limit around ∼25 ppb. Interestingly, the response of the developed sensor to humidity is independent in the measured range (0–33 % relative humidity at 25 °C) and the dependency to the presence of NH is rather poor as well (∼1.5 % at 50 ppm)., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects RTI2018-095856-B-C22 (AEI/ FEDER), RTI2018-095856-B-C21 (AEI/FEDER), RTI2018-095303-AC52, MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015- 67557-C2-1-P, and PIE 2010-6OE-013. The Comunidad de Madrid by S2018/NMT-4321. D. M. acknowledges the financial support from the Fundacion ´ General CSIC via Programa ComFuturo. A. S. acknowledges the financial support from the Comunidad de Madrid for an “Atraccion ´ de Talento Investigador” contract (no. 2017-t2/IND5395)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulation of crystallinity through radiofrequency electromagnetic fields in plla/magnetic nanoparticles composites: A proof of concept

  • Multigner, M.
  • Morales, I.
  • Muñoz, M.
  • Bonache, V.
  • Giacomone, F.
  • Presa, P. de la
  • Benavente, Rosario
  • Torres, Belén
  • Mantovani, D.
  • Rams, J.
To modulate the properties of degradable implants from outside of the human body rep-resents a major challenge in the field of biomaterials. Polylactic acid is one of the most used polymers in biomedical applications, but it tends to lose its mechanical properties too quickly during degradation. In the present study, a way to reinforce poly-L lactic acid (PLLA) with magnetic nano-particles (MNPs) that have the capacity to heat under radiofrequency electromagnetic fields (EMF) is proposed. As mechanical and degradation properties are related to the crystallinity of PLLA, the aim of the work was to explore the possibility of modifying the structure of the polymer through the heating of the reinforcing MNPs by EMF within the biological limit range f·H < 5·× 10 Am. Composites were prepared by dispersing MNPs under sonication in a solution of PLLA. The heat released by the MNPs was monitored by an infrared camera and changes in the polymer were ana-lyzed with differential scanning calorimetry and nanoindentation techniques. The crystallinity, hardness, and elastic modulus of nanocomposites increase with EMF treatment., This research was funded by Community of Madrid projects ADITIMAT-CM -S2018/NMT- 4411 and S2018/NMT-4381-MAT4.0-CM.C; Spanish Ministry of Science and Innovation projects RTI2018-096391-B-C31, RTI2018-095856-B-C21 and PTA2015-10497-I; and Ayudas a la Movilidad PDI URJC 2018 and 2019
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Further progress in the study of epsilon iron oxide in archaeological baked clays

  • López-Sánchez, Jesús
  • Palencia-Ortas, A.
  • Campo, Ángel Adolfo del
  • McIntosh, G.
  • Kovacheva, M.
  • Martín Hernández, Fátima
  • Carmona, N.
  • Rodríguez de la Fuente, Óscar
  • Marín, Pilar
  • Molina‐Cardín, Alberto
  • Osete, María Luisa
  • AMPHIBIAN Project ID:720853
[EN] The occurrence of ε-FeO in archaeological samples that have been subjected to high temperatures is gradually being detected by the use of micrometric structural characterization techniques. This work provides new information by revealing that the ε-FeO is formed as a response to temperature, the aggregation state and the position within the baked clay with respect to the nearest heat source. In addition, depending mainly on the atmospheric environment, the temperature reached by the combustion structure, the distance from the heating source and the particle aggregation, other iron oxide magnetic phases are produced. In the baked clay studied here, hematite is found over the whole range of samples studied but its magnetic contribution is negligible. Magnetite is observed at the sample surface, probably due to local atmospheric environment closest to the combustion source. Maghemite is found at all depths up to 6 cm below the sample surface. ε-FeO has a limited distribution, found within 2–3 cm of the sample surface. Furthermore, the viability of this compound as a palaeofield marker has been evaluated in both archaeological and synthetic samples. The results indicate that ε-FeO is able to register the direction of the magnetic field. Linear palaeointensity plots have been obtained in synthetic samples, although the value of the palaeofield could be, sometimes, overestimated., The authors also acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities under the projects RTI2018-095856-B-C21, CGL2017-87015-P, CGL2017-92285-EXP, CGL2017-92285-EXP/BTE, MAT2017-86540-C4-1-R, MAT2017-87072-C4-2-P and RTI2018-095303-A-C52, from Comunidad de Madrid NANOFRONTMAG S2013/MIT-2850 and NANOMAGCOST S2018/NMT-4321, and from the European Commission under H2020 frame by AMPHIBIAN Project ID: 720853. APO thanks the Ministry of Economy, Industry and Competitiveness (PTA Contract)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the hidden entropy in ZnFe2O4

  • Cobos, Miguel Ángel
  • Hernando, Antonio
  • Marco, J.F.
  • Puente-Orench, Inés
  • Jiménez, José Antonio
  • Llorente, Irene
  • García Escorial, Asunción
  • Presa, Patricia de la
13 pags., 9 figs., 2 tabs., The antiferromagnetic (AFM) transition of the normal ZnFe2O4 has been intensively investigated with results showing a lack of long-range order, spin frustrations, and a "hidden" entropy in the calorimetric properties for inversion degrees δ ≈ 0 or δ = 0. As δ drastically impacts the magnetic properties, it is logical to question how a δ value slightly different from zero can affect the magnetic properties. In this work, (Zn1-δFeδ)[ZnδFe2-δ]O4 with δ = 0.05 and δ = 0.27 have been investigated with calorimetry at different applied fields. It is shown that a δ value as small as 0.05 may affect 40% of the unit cells, which become locally ferrimagnetic (FiM) and coexists with AFM and spin disordered regions. The spin disorder disappears under an applied field of 1 T. Mossbauer spectroscopy confirms the presence of a volume fraction with a low hyperfine field that can be ascribed to these spin disordered regions. The volume fractions of the three magnetic phases estimated from entropy and hyperfine measurements are roughly coincident and correspond to approximately 1/3 for each of them. The "hidden" entropy is the zero point entropy different from 0. Consequently, the so-called "hidden" entropy can be ascribed to the frustrations of the spins at the interphase between the AFM-FiM phases due to having δ ≈ 0 instead of ideal δ = 0., The authors acknowledge ILL and the D1B-CRG (Ministerio de Ciencia, e Innovación, Spain) with proposal numbers CRG-2710, CRG-2797 and 5-31-274 2 for the beam time allocated at both the D1B and D2B instruments. This research has been funded by Spanish Ministries of Science Innovation and Universities and of Economy and Competitiveness by means of the AFORMAR (PID2019-109334RB), RTI2018-095303-B-C51 and RTI2018-095856-B-C21 projects. The support of the grants from the Community of Madrid numbers S2018/NMT-4381-MAT4.0-CM and P2018/NMT4321 is also recognized, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coexistence of antiferro- and ferrimagnetism in the spinel ZnFe2O4 with an inversion degree δ lower than 0.3

  • Cobos, Miguel Ángel
  • Presa, Patricia de la
  • Puente-Orench, Inés
  • Llorente, Irene
  • Morales, Irene
  • García Escorial, Asunción
  • Hernando, Antonio
  • Jiménez, José Antonio
Samples with inversion parameter values (δ) ranging from 0.27 to 0.14 while maintaining the crystallite size value have been successfully fabricated from commercially available powders by mechanical grinding and thermal annealing treatments at temperatures ranging between 400 and 600 °C. Detailed characterization studies of these samples using X-ray, neutron diffraction and magnetic measurements have confirmed for the first time the simultaneous coexistence at 2 K of short range antiferromagnetic and ferrimagnetic ordering for a wide range of the inversion parameter. The magnetic phase diagram obtained is different from the one previously reported, which shows at 2 K the coexistence of long range antiferromagnetic order and short range order for values of inversion parameters less than 0.1 and the presence of a ferrimagnetic order only for values of δ > 0.2. At room temperature, the Rietveld analysis of NPD patterns and the magnetization curves showed a paramagnetic behavior in the samples with δ ≤ 0.1. For the samples with higher cationic inversion, typical hysteresis curves of ferrimagnetic materials were observed and the saturation magnetization values obtained agree quite well with the net magnetic moment obtained from the Rietveld refinement of the neutron diffraction patterns., The authors acknowledge ILL and the D1B-CRG (Ministerio de Ciencia, e Innovación, Spain) for the beam time allocated at both the D1B and D2B instruments (Jose A. Jimenez; M.A.COBOS; LLORENTE CARRASCO Irene and PUENTE ORENCH Ines. (2020). Effect of inversion degree on the magnetic properties of spinel zinc ferrite. Institut Laue-Langevin (ILL) doi:10.5291/ILL-DATA.CRG-2710; Jose A. Jimenez; M.A.COBOS; LLORENTE CARRASCO Irene; NASSIF Vivian and PUENTE ORENCH Ines. (2021). Evolution of the magnetic properties with annealing temperature of spinel zinc ferrite disordered by ball milling. Institut Laue-Langevin (ILL) doi:10.5291/ILL-DATA.CRG-2797, Jose A. Jimenez; M.A.COBOS; LLORENTE CARRASCO Irene and PUENTE ORENCH Ines. (2020). Effect of microstructural features and defects introduced by mechanical milling and thermal treatments on the magnetic order of spinel zinc. Institut Laue-Langevin (ILL) doi:10.5291/ILL-DATA.5-31-2742). This research has been funded by Spanish Ministries of Science and Innovation (MICINN) and of Economy and Competitiveness (MINECO) by means of the AFORMAR (PID2019-109334RB) and RTI2018-095856-B-C21 projects, respectively. The support of the grants from the Community of Madrid number S2018/NMT-4381-MAT4.0-CM and P2018/NMT-4321 is also recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferrimagnetic Clusters as the Origin of Anomalous Curie–Weiss Behavior in ZnFe2O4 Antiferromagnetic Susceptibility

  • Hernando, Antonio
  • Cobos, Miguel Ángel
  • Jiménez, José Antonio
  • Llorente, Irene
  • García Escorial, Asunción
  • Presa, Patricia de la
Different studies carried out in the last three decades on the magnetic susceptibility of the spinel ZnFeO ferrite have revealed the positive character of its Curie–Weiss temperature, contradicting its observed antiferromagnetic behavior which is characterized by a well-defined susceptibility peak centered around the Neel temperature (10 K). Some approaches based on ab initio calculations and mixture of interactions have been attempted to explain this anomaly. This work shows how for very low values of the inversion parameter, the small percentage of Fe atoms located in tetrahedral sites gives rise to the appearance of ferrimagnetic clusters around them. Superparamagnetism of these clusters is the main cause of the anomalous Curie–Weiss behavior. This finding is supported experimentally from the thermal dependence of the inverse susceptibility and its evolution with the degree of inversion., This research was funded by Spanish Ministries of Science Innovation and Universities and of Economy and Competitiveness by means of the AFORMAR (PID2019-109334RB), RTI2018-095303-B-C51 and RTI2018-095856-B-C21 projects. The support of the grants from the Community of Madrid numbers S2018/NMT-4381-MAT4.0-CM and P2018/NMT-4321 is also recognized.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid Sol-Gel Coatings Doped with Non-Toxic Corrosion Inhibitors for Corrosion Protection on AZ61 Magnesium Alloy

  • Rodríguez-Alonso, L.
  • López-Sánchez, Jesús
  • Serrano Rubio, Aída
  • Rodríguez de la Fuente, Óscar
  • Galván Sierra, Juan Carlos
  • Carmona, N.
Physiological human fluid is a natural corrosive environment and can lead to serious corrosion and mechanical damages to light Mg–Al alloys used in prosthetics for biomedical applications. In this work, organic–inorganic hybrid coatings doped with various environmentally friendly and non-toxic corrosion inhibitors have been prepared by the sol-gel process for the corrosion protection of AZ61 magnesium alloys. Effectiveness has been evaluated by pH measurements, optical microscopy, and SEM during a standard corrosion test in a Hanks’ Balanced Salt Solution. The results showed that the addition of an inhibitor to the sol-gel coating can improve significantly the corrosion performance, being an excellent barrier for the L-cysteine-doped hybrid sol-gel films. The incorporation of TiO nanoparticles, 2-Aminopyridine and quinine organic molecules slowed down the corrosion rate of the Mg–Al alloy. Graphene oxide seemed to have the same response to corrosion as the hybrid sol-gel coating without inhibitors., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects RTI2018-095856-B-C21 (AEI/FEDER; PIE: 2021-60-E-030, PIE: 2010-6-OE-013, and PID2019-104717RB-I00). A.S. acknowledges the financial support from the Comunidad de Madrid for an “Atracción de Talento Investigador” contract (no. 2017-t2/IND5395).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-Time Monitoring of Breath Biomarkers with A Magnetoelastic Contactless Gas Sensor: A Proof of Concept

  • Peña, Álvaro
  • Aguilera, Juan Diego
  • Matatagui, Daniel
  • Presa, Patricia de la
  • Horrillo, Carmen
  • Hernando, Antonio
  • Marín, Pilar
17 páginas, 12 figuras, 1 tabla, In the quest for effective gas sensors for breath analysis, magnetoelastic resonance-based gas sensors (MEGSs) are remarkable candidates. Thanks to their intrinsic contactless operation, they can be used as non-invasive and portable devices. However, traditional monitoring techniques are bound to slow detection, which hinders their application to fast bio-related reactions. Here we present a method for real-time monitoring of the resonance frequency, with a proof of concept for real-time monitoring of gaseous biomarkers based on resonance frequency. This method was validated with a MEGS based on a Metglass 2826 MB microribbon with a polyvinylpyrrolidone (PVP) nanofiber electrospun functionalization. The device provided a low-noise (RMS = 1.7 Hz), fast (<2 min), and highly reproducible response to humidity (Δf = 46–182 Hz for 17–95% RH), ammonia (Δf = 112 Hz for 40 ppm), and acetone (Δf = 44 Hz for 40 ppm). These analytes are highly important in biomedical applications, particularly ammonia and acetone, which are biomarkers related to diseases such as diabetes. Furthermore, the capability of distinguishing between breath and regular air was demonstrated with real breath measurements. The sensor also exhibited strong resistance to benzene, a common gaseous interferent in breath analysis., Author A.P. received funding from grant PRE2019-0875001234, Ministerio de Ciencia e Innovación (MCI), Spain. D.M. received funding from Comfuturo, Consejo Superior de Investigaciones Científicas, Spain. Authors A.P., D.M., P.M. and C.H. received funding from projects RTI2018-095856- B-C21 and RTI2018-095856-B-C22, Ministerio de Ciencia e Innovación, Spain. A.P. and P.M. received funding S2018/NMT-4321, Comunidad de Madrid. J.D.A received funding from Next Generation EU, Ministerio de Trabajo y Economía, Comunidad de Madrid, Spain, Programa Investigo from grant 96-UCM-INV.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A combined micro-Raman, X-ray absorption and magnetic study to follow the glycerol-assisted growth of epsilon-iron oxide sol-gel coatings

  • López-Sánchez, Jesús
  • Serrano Rubio, Aída
  • Campo, Ángel Adolfo del
  • Muñoz-Noval, A.
  • Salas, Eduardo
  • Cabero, Mariona
  • Varela, María
  • Abuín, Manuel
  • Castro, Germán R.
  • Rubio-Zuazo, J.
  • Rodríguez de la Fuente, Óscar
  • Carmona, N.
[EN] Epsilon iron oxide (ε-FeO) coatings on Si(100) substrates are obtained by an easy one-pot sol-gel recipe assisted by glycerol in an acid medium. Glycerol, given its small dimensions, enables the formation of ε-FeO nanoparticles with a size of a few nanometers and the highest purity is reached in coatings after a densification treatment at 960 °C. The structural and compositional evolution up to 1200 °C is studied by confocal Raman microscopy and X-ray absorption spectroscopy techniques, correlating the existing magnetic properties. We report a novel characterization method, which allows monitoring the evolution of the precursor micelles as well as the intermediate and final phases formed. Furthermore, the inherent industrial technology transfer of the sol-gel process is also demonstrated with the ε-FeO polymorph, impelling its application in the coatings form., This work has been supported by the Ministerio de Ciencia e Innovación (MCINN, Spain) through the projects PIE: 2021-60-E-030, PIE: 2010-6-OE-013, PID2019-104717RB-I00 (2020–2022), MAT2017-86540-C4-1-R, RTI2018-095856-B-C21 (2019–2021), RTI2018-097895-B-C43 and RTI2018-095303-A-C52. The authors are grateful to The ESRF (France), MCINN and Consejo Superior de Investigaciones Científicas (CSIC, Spain) for the provision of synchrotron radiation facilities and to the BM25-SpLine Staff for their valuable help. A.S.and A.M.-N acknowledge financial support from Comunidad de Madrid (Spain) for an “Atracción de Talento Investigador” Contract 2017-t2/IND5395 and 2018-T1/IND-10360, respectively
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of Low-Toxic Hybrid Sol-Gel Coatings with Organic pH-Sensitive Inhibitors for Corrosion Protection of AA2024 Aluminium Alloy

  • Jaldo Serrano, Eva
  • López-Sánchez, Jesús
  • García Galván, Federico
  • Serrano Rubio, Aída
  • Rodríguez de la Fuente, Óscar
  • Barranco, Violeta
  • Galván Sierra, Juan Carlos
  • Carmona, N.
Today’s environmental needs require the reduction of the weight of vehicles, thus reducing fuel consumption and associated emissions. For this reason, the use of light alloys is being studied, which, due to their reactivity, must be protected before use. In this work, the effectiveness of a hybrid sol-gel coating doped with various organic environmentally friendly corrosion inhibitors applied to an AA2024 lightweight aluminium alloy is evaluated. Some of the inhibitors tested are pH indicators, acting as both corrosion inhibitors and optical sensors for the surface of the alloy. Samples are subjected to a corrosion test in a simulated saline environment and characterised before and after the test. The experimental results regarding their best inhibitor performance for their potential application in the transport industry are evaluated., This research was funded by the Spanish Ministry of Science and Innovation (MICINN) for financing the projects RTI2018-095856-B-C21; and by the Spanish Ministry of Economic Affairs and Digital Transformation (MINECO) through the projects PID2020-114192RB-C41, PID2019-104717RB-I00 and PID2021-122980OB-C51. A.S. acknowledges the financial support from MCIN for a “Ramón y Cajal” contract RYC2021-031236-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel one-pot sol-gel synthesis route of Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix

  • Castellano-Soria, Alberto
  • López-Sánchez, Jesús
  • Granados-Miralles, Cecilia
  • Varela, María
  • Navarro, Elena
  • González, César
  • Marín, Pilar
[EN] Fe3C/few-layered graphene core/shell nanoparticles embedded in a carbon matrix are synthesized by a novel two-step surfactant sol-gel strategy, where the processes of hydrolysis, polycondensation and drying take place in a one-pot. The present approach is based on the combined action of oleic acid and oleylamine, which act sterically on the precursor micelles when a densification temperature is performed in a reducing atmosphere. The structural and magnetic evolution of the formed compounds is investigated, ranging from iron oxides such as Fe3O4 and FeO, to the formation of pure Fe3C/C samples from 700 ºC onwards. Interestingly, Fe3C nanoparticles with a size of ~20 nm crystallize immersed in the carbon matrix and the surrounding environment forms an oriented encapsulation built by few-layered graphene. The nanostructures show a saturation magnetization of ~43 emu/g and a moderate coercivity of ~500 Oe. Thereby, an innovative chemical route to produce single phase Fe3C nanoparticles is described, and an effective method of few-layered graphene passivation is proposed, yielding a product with a high magnetic response and high chemical stability against environmental corrosion., Ministerio de Ciencia de Innovación (MCINN), Spain, through the projects: MAT2015–65445-C2–1-R, MAT2017–86450-C4–1-R, MAT2015–67557-C2–1-P, RTI2018–095856-B-C21, RTI2018–095303-A-C52, PIE: 2021-60-E030, PIE: 2010–6-OE-013; and Comunidad de Madrid, Spain, by S2013/MIT-2850 NANOFRONTMAG and S2018/NMT-4321 NANOMAGCOST. The authors are also grateful for the electron microscopy characterization performed in the Centro Nacional de Microscopía Electrónica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM), support from MCINN grant # RTI2018–097895-B-43. C.G.-M. acknowledges the financial support from MICINN through the “Juan de la Cierva” Program (FJC2018–035532-I).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sol-gel synthesis control of iron-cobalt alloy/ferrite core/shell nanoparticles supported by a carbon medium with semi-hard magnetic features

  • Castellano-Soria, Alberto
  • López-Sánchez, Jesús
  • Serrano Rubio, Aída
  • Gorni, Giulio
  • Varela, María
  • Sardinero, Ignacio
  • Carmona, N.
  • Hernando, Antonio
  • Marín, Pilar
  • Navarro, Elena
12 pags., 7 figs., 3 tabs., We explore a simple and optimized approach for obtaining magnetic nanoparticle-carbon composites by a novel one-pot sol-gel method. In them, various metal cations ratios of Fe3+ and Co2+ are evaluated. The ratio of Fe:Co is a critical parameter that governs the presence of different crystalline phases with tailored magnetic properties. Interestingly, the smallest introduction of Co into the synthesis (19Fe:1Co) provides an abrupt emergence of the body-centered cubic (bcc) Fe-Co alloy, instead of the orthorhombic Pnma structure characteristic of the Fe3C intermetallic compound (1Fe:0Co). Advanced structural and electronic characterizations reveal the formation of Fe-Co/Co-ferrite core/shell nanoparticle structures embedded in a carbon matrix. The sphere-like nanoparticles range from 10 to 45 nm and the shells show a spinel structure with a thickness of 2–3 nm. In addition, X-ray absorption spectroscopy unveils that the oxidation state of Fe and Co cations is close to zero, demonstrating their predominant metallic character. The magnetic properties can be modulated by a precise control of the alloy composition varying the Co content, displaying saturation magnetization values close to ∼137 emu/g. The nanoparticles are mainly single magnetic domain with a considerable coercive field (∼450 Oe), higher than those reported in the literature for Fe-Co nanoparticles. This semi-hard character is due to a notable spring exchange effect emerged by passivating the surface of Fe-Co-bcc cores with a thin Co-ferrite-like shell., The work has been supported by the Ministerio de Ciencia e Innovación (MCINN) through the projects MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, RTI2018–095856-B-C21, RTI2018–095303-A-C52, PIE: 2021-60-E-030, PIE: 2010-6-OE-013, PID2021-122980OB-C51 and Comunidad de Madrid by S2013/MIT-2850 NANOFRONTMAG and S2018/NMT-4321 NANOMAGCOST. Electron microscopy measurements were carried out at the Centro Nacional de Microscopía Electrónica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM). The authors are grateful to The ESRF (France), MCINN and Consejo Superior de Investigations Científicas (CSIC, Spain) for the provision of synchrotron radiation facilities and to the BM25-SpLine Staff for their support. XAS experiments were also performed at the CLAESS-BL22 beamline at ALBA Synchrotron (Grant no. 2022025654) in collaboration with ALBA staff. Giulio Gorni acknowledges financial support from FJC2020–044866-I /MCIN/AEI/ 10.13039/501100011033 and European Union “NextGenerationEU”/PRTR”. A.S. acknowledges financial support from the “Ayudas para contratos Ramón y Cajal” contract No. RYC2021-031236-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Sensitivity Wireless Sensing Using Amorphous Magnetic Microwires

  • Lejeune, B.T.
  • Gueye,Papa Gorgui Birame
  • Archilla Sanz, Diego
  • Navarro, Elena
  • Vázquez Villalabeitia, Manuel
  • Pérez del Real, Rafael
  • Lewis, L. H.
  • Marín, Pilar
[EN] Glass-coated amorphous ferromagnetic microwires subjected to variations in mass loading and parallel wire arrays with 0.5-6-cm interwire spacing were found to deliver exceptional magnetomechanical and wireless giant magnetoimpedance (GMI) responses, in the kilohertz and microwave range, respectively. The microwires allow wireless quantification of microgram mass differences: the magnetomechanical resonance frequency measured in zero applied field demonstrates an approximately linear decrease of 3 Hz/ μ g, and a sensitivity response that is ten times greater than that reported for commercial METGLAS-type amorphous magnetic ribbons of comparable length. Microwave giant magnetoimpedance data collected from planar arrays of parallel microwires show either constructive or destructive interference when compared to data obtained from a single microwire. The exceptional responsiveness of the glass-coated amorphous ferromagnetic microwires to mass loading and to geometric arrangement, along with their small diameter and ease of fabrication, highlights their promise for a wide variety of sensor applications, including biosensing, civil infrastructure monitoring, and high-throughput remote detection schemes., This work was supported in part by Northeastern University; in part by Fulbright España, I-Link (CSIC), under Grant A20074; in part by the Spanish Ministry of Science and Innovation under Grant RTI2018-095856-B-C21; and in part by the Comunidad de Madrid NANOMAGCOST under Grant S2018/NMT-4321. T, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation of Defective Few-Layered Graphene Mesostructures by High-Energy Ball Milling and Their Combination with FeSiCuNbB Microwires for Reinforcing Microwave Absorbing Properties

  • López-Sánchez, Jesús
  • Peña, Álvaro
  • Serrano, Aída
  • Del Campo, Adolfo
  • Rodríguez de la Fuente, Óscar
  • Carmona, N.
  • Matatagui, Daniel
  • Horrillo, Carmen
  • Rubio-Zuazo, J.
  • Navarro, Elena
  • Marín, Pilar
15 páginas, 9 figuras, 4 tablas, Defective few-layered graphene mesostructures (DFLGMs) are produced from graphite flakes by high-energy milling processes. We obtain an accurate control of the generated mesostructures, as well as of the amount and classification of the structural defects formed, providing a functional material for microwave absorption purposes. Working under far-field conditions, competitive values of minimum reflection loss coefficient (RLmin) = ¿21.76 dB and EAB = 4.77 dB are achieved when DFLGMs are immersed in paints at a low volume fraction (1.95%). One step forward is developed by combining them with the excellent absorption behavior that offers amorphous Fe73.5Si13.5B9Cu1Nb microwires (MWs), varying their filling contents, which are below 3%. We obtain a RLmin improvement of 47% (¿53.08 dB) and an EAB enhancement of 137% (4 dB) compared to those obtained by MW-based paints. Furthermore, a fmin tunability is demonstrated, maintaining similar RLmin and EAB values, irrespective of an ideal matching thickness. In this scenario, the Maxwell-Garnet standard model is valid, and dielectric losses mainly come from multiple reflections, interfacial and dielectric polarizations, which greatly boost the microwave attenuation of MWs. The present concept can remarkably enhance not only the MW attenuation but can also apply to other microwave absorption architectures of technological interest by adding low quantities of DFLGMs., The present work has been supported by the Ministerio Español de Ciencia e Innovación (MICINN) through the projects: PIE-2010-OE-013-200014, PIE 2021-60-E-030, RTI2018-095856-B-C21, and RTI2018-095303-A-C52; Ministerio de Asuntos Económicos y Transformación Digital (MINECO) by PID2020-114192RB-C41; and Comunidad de Madrid, Spain, by S2018/NMT-4321 NANOMAGCOST. MICINN also supports A.S., D.M., and A.P. through the grants RYC2021-031236-I, RYC2021-031166-I, and PRE2019-0875001234, respectively, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Implementing a sol-gel route to adjust the structural and dielectric characteristics of Bi and Fe co-doped BaTiO3 ceramics

  • Gouadria, Hamida
  • Smari, Mourad
  • Mnasri, Taoufik
  • Necib, Jallouli
  • López-Sánchez, Jesús
  • Marín, Pilar
  • Jamale, Atul P.
  • Younes, Rached Ben
[EN] The present work explores the impact of Fe insertion on the physical properties of Ba0.95Bi0.05Ti1-xFexO3 (x = 0.025, 0.050, and 0.075) prepared via sol gel method. The resulting samples crystallize in the tetragonal structure with space group P4mm and their morphological features point out the variation of the microstructure with Fe content. In turn, the dielectric constant versus temperature plot reveals the existence of two transition phases: the first one is ferroelectric-paraelectric transition phase (TF-P) and the second one is ferroelectric orthorhombic - ferroelectric tetragonal phase (TO-T). Analysis of conductivity curves using Jonscher’s augmented equation (for x = 0.025) and Jonscher’s power law (for x = 0.075) suggests the Non-Overlapping Small Polaron Tunneling (NSPT) model as a conduction mechanism., Hamida Gouadria acknowledges funding from the Tunisian Ministry of Higher Education and Scientific Research. Mourad Smari acknowledges the financial support from the Program Ulam NAWA (Polish National Agency for Academic Exchange) under the project BPN/ULM/ 2021/1/00015/U/00001. Jesús L´opez S´anchez receives funding from the Ministerio de Asuntos Econ´omicos y Transformaci´on Digital (MINECO) through the project PID2020-114192RB-C41. Pilar Marín acknowledges the financial support from the Ministerio de Ciencia e Innovaci´on (MICINN) through the project RTI2018-095856-B-C21 and Comunidad de Madrid by S2018/NMT-4321 "NANOMAGCOST"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic properties, conduction processes and the Summerfield scaling of barium titanate ceramics based on Bi and Fe

  • Gouadria, Hamida
  • Mnasri, Taoufik
  • Jamale, Atul P.
  • López-Sánchez, Jesús
  • Necib, Jallouli
  • Marín, Pilar
  • Carmona, N.
  • Smari, Mourad
[EN] In this study, the effects of Bi and Fe on the optical and electrical qualities of BaTiO3 made with the sol–gel method are examined. On the one hand, UV–visible spectroscopy is used to study the sample's optical behavior. This shows that the band gap energy is lower with Bi and Fe doping than with pure BaTiO3. On the other hand, an impedance spectroscopy investigation is carried out to reveal the conduction processes in the frequency range of 102 to 107 Hz and the temperature range of 450–650 K. This examination is carried out to investigate the conduction mechanisms. The conduction mechanism in the elaborated material is best described by the Overlapping Large Polaron Tunnelling model (OLPT), where the exponent s drops with temperature until reaching a minimal value, at which point it grows again. In addition, the Summerfield scaling method is used to investigate the relationship between conductivity and temperature. When the scaled curves are combined into one master curve, it shows that the time–temperature superposition principle (TTSP) is true and that Koop's concept about how the dielectric constant change with frequency is valid. So, the results give us new information about the optical and dielectric qualities of the functional barium titanate ceramics based on Bi and Fe., Hamida Gouadria acknowledges funding from the Tunisian Ministry of Higher Education and Scientific Research. Mourad Smari acknowledges the financial support from the Program Ulam NAWA (Polish National Agency for Academic Exchange) under the project BPN/ULM/2021/1/00015/U/00001. Jesús López Sánchez receives funding from the Ministerio de Asuntos Económicos y Transformación Digital (MINECO) through the project PID2020-114192RB-C41. Pilar Marín acknowledges the financial support from the Ministerio de Ciencia e Innovación (MICINN) through the project RTI2018-095856-B-C21 and Comunidad de Madrid by S2018/NMT-4321 “NANOMAGCOST”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breath biomarkers using magnonic wireless sensor based on magnetic nanoparticles

  • Aguilera, J.D.
  • Arranz, D.
  • Peña, A.
  • Horrillo, Carmen
  • De la Presa, D.
  • Matatagui, D.
8 páginas, 6 figuras, In this paper, an innovative device with gas remote-sensing capability is proposed, which is based on the interaction between magnetic nanoparticles and gases associated with exhaled breath biomarkers that can have a metabolic origin. Magnetite (Fe₃O₄) nanoparticles of around 30 nm have been used. The gas molecules adsorbed on surface modulate the magnetization of the nanoparticles and magnetostatic surface spin waves (MSSW) propagated on an yttrium iron garnet (YIG) thin film are used to detect this modulation by the induced frequency shift. The optimization of the remote gas sensor has been carried out through simulations of a magnetic model. Simulations show the feasibility of developing a high-performance remote sensor by encapsulating the nano- structures in a polytetrafluoroethylene (PTFE) tube and detecting part per million changes in their magnetiza- tion. The results show the possibility of developing new, inexpensive, reusable, contactless magnetic gas sensors employing spin waves as transductor. The developed sensor shows a high sensitivity and selectivity to concen- trations as low as 50 ppm of different breath biomarkers., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects RETOS RTI2018-095856-B, RTI2018-095856-B-C22 (AEI/FEDER), RTI2018-095856-B-C21 (AEI/FEDER), PID2021-123112OB-C21 (AEI/FEDER), PDC2022-133039-I00 (AEI/FEDER), Comunidad de Madrid (NANOMAGCOST-CM S2018/NMT-4321 and COST Action CA21101. J.D.A received funding from Next Generation EU, Ministerio de Trabajo y Economía, Comunidad de Madrid, Spain, Programa Investigo from grant 96-UCM-INV. D. M. acknowledges financial support from the Spanish Ministry of Science and Innovation (MCI) through the Ramóon y Cajal grant RYC2021-031166-I. A. P. acknowledges funding from grant PRE2019-0875001234 (MCI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Modeling and simulation of a magnonic gas sensor to detected diseases in human breath

  • Pozo-Gómez, M.
  • Aguilera-Martín, J.D.
  • De la Presa, P.
  • Cruz, C.
  • Marín, P.
  • Matatagui, D
  • Horrillo, Carmen
2021 13th Spanish Conference on Electron Devices (CDE), 09-11 June 2021, Sevilla, Spain, A theoretical study of the interaction between magnetostatic surface spin waves (MSWs) and magnetic nanoparticles (MNPs) is presented. The propagation of the MSW occurs on an yttrium iron garnet (YIG) thin film, and the MNPs are encapsulated in a tube. The operation of the sensor is based on the fact that a gas interacting with the nanostructures produces a change in their magnetization, and this, in turn, produces a measurable change in MSW propagation. The gas sensor structure is studied and characterized theoretically, through simulations. These simulations are also used in order to optimize the device through changes in the geometry, reaching sensitivities of 2 ppm in the magnetization of the sensitive material., 10.13039/501100004837-Spanish Ministry of Science and Innovation (Grant Number: RTI2018-095856-B-C22 (AEI/FEDER),RTI2018-095856-B-C21), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating the magnetic properties of Fe3C/C encapsulated core/shell nanoparticles for potential prospects in biomedicine

  • Castellano-Soria, A.
  • López-Méndez, R.
  • Espinosa, A.
  • Granados-Miralles, Cecilia
  • Varela, M.
  • Marín, P.
  • Navarro, E.
  • López-Sánchez, Jesús
In the pursuit of alternative and less invasive medical treatments, magnetic nanoparticles (NPs) have gained significant relevance. Iron carbides NPs stand out for their higher saturation magnetizations compared to iron oxides, while maintaining a suitable biocompatibility. In this work, high control is achieved over the composition and morphology of Fe3C/C encapsulated core/shell nanoparticles through fine-tuning of the sol-gel synthesis parameters. Specifically, the impact of decreasing each surfactant concentration added, nt, the same both for oleylamine (ON) and oleic acid (OA), has been explored. A minimum value for such parameter denoted by nt,min. was required to produce pure Fe3C@C NP-composites. For nt < 4 mmol, some minor α-Fe impurities arise, and the effective carburization becomes unstable due to insufficient carbon. The magnetic properties of the materials prepared were optimized by reducing the excess carbon from surfactants, resulting in saturation magnetization values of 86 emu/g. (for pure Fe3C at nt = 5 mmol) and 102 emu/g (for Fe3C and <2 % w.t. of α-Fe impurity at nt = 4 mmol). In view of this, several cytotoxicity studies for different Fe3C@C samples were conducted, exhibiting excellent biocompatibility in cell-based assays, which could lead to potential application at the forefront of biomedical fields. © 2024 The Authors, The work has been supported by the Ministerio de Ciencia e Innovacion (MCINN) through the projects PDC2022-133039-I00, PID2021-123112OB-C21-MICIIN, TED2021-129688B-C21, MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, RTI2018-095856-B-C21, RTI2018-095303-A-C52, PID2020-114192RB-C41, PIE: 2021-60-E-030, PIE: 2010-6-OE-013, PID2021-122980OB-C51, FPI PRE2020-96246 grant (R.L-M.), and Comunidad de Madrid by NANOMAGCOST-CM, S2013/MIT-2850 NANOFRONTMAG, (MAD2D-CM)-UCM3, S2018/NMT-4321 NANOMAGCOST, 2018-T1/IND-1005 (A.E.) and S2022/BMD-7434 ASAP-CM. C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". J. L.-S. acknowledges the financial support from Spanish Ministry of Economic Affairs and Digital Transformation through the project PID2021-122980OB-C5 and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). Electron microscopy measurements were carried out at the Centro Nacional de Microscopia Electronica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM). The authors also acknowledge the BM25-SpLine Staff for their valuable help and the provision of the beamline under the projects A25-2-1053 and A25-2-1009., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Coexistence of antiferro- and ferrimagnetism in the spinel ZnFe2O4 with an inversion degree d lower than 0.3

  • Cobos, M. Á.
  • de la Presa, P.
  • Puente-Orench, I.
  • Llorente, I.
  • Morales, I.
  • García-Escorial, A.
  • Hernando, A.
  • Jiménez, J. A.
Samples with inversion parameter values (d) ranging from 0.27 to 0.14 while maintaining the crystallite size value have been successfully fabricated from commercially available powders by mechanical grinding and thermal annealing treatments at temperatures ranging between 400 and 600 °C. Detailed characterization studies of these samples using X-ray, neutron diffraction and magnetic measurements have confirmed for the first time the simultaneous coexistence at 2 K of short range antiferromagnetic and ferrimagnetic ordering for a wide range of the inversion parameter. The magnetic phase diagram obtained is different from the one previously reported, which shows at 2 K the coexistence of long range antiferromagnetic order and short range order for values of inversion parameters less than 0.1 and the presence of a ferrimagnetic order only for values of d > 0.2. At room temperature, the Rietveld analysis of NPD patterns and the magnetization curves showed a paramagnetic behavior in the samples with d = 0.1. For the samples with higher cationic inversion, typical hysteresis curves of ferrimagnetic materials were observed and the saturation magnetization values obtained agree quite well with the net magnetic moment obtained from the Rietveld refinement of the neutron diffraction patterns. © 2022
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unveiling the Hidden Entropy in ZnFe2O4

  • Cobos, M. A.
  • Hernando, A.
  • Marco, J. F.
  • Puente-Orench, I.
  • Jiménez, J. A.
  • Llorente, I.
  • García-Escorial, A.
  • de la Presa, P.
The antiferromagnetic (AFM) transition of the normal ZnFe2O4 has been intensively investigated with results showing a lack of long-range order, spin frustrations, and a “hidden” entropy in the calorimetric properties for inversion degrees d ˜ 0 or d = 0. As d drastically impacts the magnetic properties, it is logical to question how a d value slightly different from zero can affect the magnetic properties. In this work, (Zn1-dFed)ZndFe2-d]O4 with d = 0.05 and d = 0.27 have been investigated with calorimetry at different applied fields. It is shown that a d value as small as 0.05 may affect 40% of the unit cells, which become locally ferrimagnetic (FiM) and coexists with AFM and spin disordered regions. The spin disorder disappears under an applied field of 1 T. Mossbauer spectroscopy confirms the presence of a volume fraction with a low hyperfine field that can be ascribed to these spin disordered regions. The volume fractions of the three magnetic phases esti-mated from entropy and hyperfine measurements are roughly coincident and correspond to approximately 1/3 for each of them. The “hidden” entropy is the zero point entropy different from 0. Consequently, the so-called “hidden” entropy can be ascribed to the frustrations of the spins at the interphase between the AFM-FiM phases due to having d ˜ 0 instead of ideal d = 0. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Colossal heating efficiency via eddy currents in amorphous microwires with nearly zero magnetostriction

  • Morales Casero, Irene
  • Archilla Sanz, Diego
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Hernando Grande, Antonio
  • Marín Palacios, María Pilar
It is well stablished that heating efficiency of magnetic nanoparticles under radiofrequency fields is due to the hysteresis power losses. In the case of microwires (MWs), it is not clear at all since they undergo non-coherent reversal mechanisms that decrease the coercive field and, consequently, the heating efficiency should be much smaller than the nanoparticles. However, colossal heating efficiency has been observed in MWs with values ranging from 1000 to 2800W/g, depending on length and number of microwires, at field as low as H = 36 Oe at f = 625 kHz. It is inferred that this colossal heating is due to the Joule effect originated by the eddy currents induced by the induction field B = M + chi H parallel to longitudinal axis. This effect is observed in MWs with nearly zero magnetostrictive constant as Fe_ (2.25)Co_(72.75)Si_(10)B_(15) of 30 mu m magnetic diameter and 5 mm length, a length for which the inner core domain of the MWs becomes axial. This colossal heating is reached with only 24 W of power supplied making these MWs very promising for inductive heating applications at a very low energy cost.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Boosting the tunable microwave scattering signature of sensing array platforms consisting of amorphous ferromagnetic Fe_2.25Co_72.75Si_10B_15 microwires and its amplification by intercalating cu microwires

  • Archilla Sanz, Diego
  • López Sánchez, Jesús
  • Hernando Grande, Antonio
  • Navarro Palma, Elena
  • Marín Palacios, María Pilar
The following work addresses new configurations of sensing array platforms that are composed of Co-based amorphous ferromagnetic microwires (MWs) to obtain an enhanced modulation of the microwave scattering effects through the application of low strength DC or AC magnetic fields. An amorphous MW is an ultrasoft ferromagnetic material (coercivity similar to 0.2 Oe) with a circumferential magnetic anisotropy that provides a high surface sensitivity when it is subjected to an external magnetic field. Firstly, microwave scattering experiments are performed as a function of the length and number of MWs placed parallel to each other forming an array. Subsequently, three array configurations are designed, achieving high S_21 scattering coefficients up to about -50 dB. The influence of DC and AC magnetic fields on S_21 has been analyzed in frequency and time domains representation, respectively. In addition, the MWs sensing array has been overlapped by polymeric surfaces and the variations of their micrometric thicknesses also cause strong changes in the S_21 amplitude with displacements in the frequency that are associated to the maximum scattering behavior. Finally, a new concept for amplifying microwave scattering is provided by intercalating Cu MWs into the linear Co-based arrays. The designed mixed system that is composed by Co-based and Cu MWs exhibits a higher S_21 coefficient when compared to a single Co-based MW system because of higher electrical conductivity of Cu. However, the ability to modulate the resulting electromagnetic scattering is conferred by the giant magneto-impedance (GMI) effects coming from properties of the ultrasoft amorphous MWs. The mixed array platform covers a wide range of sensor applications, demonstrating the feasibility of tuning the S_21 amplitude over a wide scattering range by applying AC or DC magnetic fields and tuning the resonant frequency position according to the polymeric slab thickness.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Unveiling the hidden entropy in ZnFe_2O_4

  • Cobos Fernández, Miguel Ángel
  • Hernando Grande, Antonio
  • Marco, Jose Francisco
  • Puente Orench, Irene
  • Jiménez, Jose Antonio
  • Llorente, Irene
  • García Escorial, Asunción
  • Presa Muñoz De Toro, Patricia Marcela De La
The antiferromagnetic (AFM) transition of the normal ZnFe_2O_4 has been intensively investigated with results showing a lack of long-range order, spin frustrations, and a "hidden" entropy in the calorimetric properties for inversion degrees delta approximate to 0 or delta = 0. As delta drastically impacts the magnetic properties, it is logical to question how a delta value slightly different from zero can affect the magnetic properties. In this work, (Zn_(1-delta)Fe_delta)[Zn_delta Fe_(2-delta)]O_4 with delta = 0.05 and delta = 0.27 have been investigated with calorimetry at different applied fields. It is shown that a delta value as small as 0.05 may affect 40% of the unit cells, which become locally ferrimagnetic (FiM) and coexists with AFM and spin disordered regions. The spin disorder disappears under an applied field of 1 T. Mossbauer spectroscopy confirms the presence of a volume fraction with a low hyperfine field that can be ascribed to these spin disordered regions. The volume fractions of the three magnetic phases estimated from entropy and hyperfine measurements are roughly coincident and correspond to approximately 1/3 for each of them. The "hidden" entropy is the zero point entropy different from 0. Consequently, the so-called "hidden" entropy can be ascribed to the frustrations of the spins at the interphase between the AFM-FiM phases due to having delta approximate to 0 instead of ideal delta = 0.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Spin transition nanoparticles made electrochemically

  • Pozo, Guillermo
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Prato, Rafael
  • Morales Casero, Irene
  • Marín Palacios, María Pilar
  • Fransaer, Jan
  • Dominguez-Benetton, Xochitl
Materials displaying novel magnetic ground states signify the most exciting prospects for nanoscopic devices for nanoelectronics and spintronics. Spin transition materials, e.g., spin liquids and spin glasses, are at the forefront of this pursuit; but the few synthesis routes available do not produce them at the nanoscale. Thus, it remains an open question if and how their spin transition nature persists at such small dimensions. Here we demonstrate a new route to synthesize nanoparticles of spin transition materials, gas-diffusion electrocrystallization (GDEx), wherein the reactive precipitation of soluble metal ions with the products of the oxygen reduction reaction (ORR), i.e., in situ produced H_2O_2, OH^-, drives their formation at the electrochemical interface. Using mixtures of Cu^(2+) and Zn^(2+) as the metal precursors, we form spin transition materials of the herbertsmithite family-heralded as the first experimental material known to exhibit the properties of a quantum spin liquid (QSL). Single-crystal nanoparticles of similar to 10-16 nm were produced by GDEx, with variable Cu/Zn stoichiometry at the interlayer sites of Zn_xCu_(4-x)(OH)_6Cl_2. For x = 1 (herbertsmithite) the GDEx nanoparticles demonstrated a quasi-QSL behavior, whereas for x = 0.3 (0.3 < x < 1 for paratacamite) and x = 0 (clinoatacamite) a spin-glass behavior was evidenced. Finally, our discovery not only confirms redox reactions as the driving force to produce spin transition nanoparticles, but also proves a simple way to switch between these magnetic ground states within an electrochemical system, paving the way to further explore its reversibility and overarching implications.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Coexistence of two spin frustration pathways in the quantum spin liquid Ca_10Cr_7O_28

  • Alshalawi, Dhoha
  • Alonso Gómez, José Miguel
  • Landa Cánovas, Ángel
  • Presa Muñoz De Toro, Patricia Marcela De La
Kagome antiferromagnetic lattices are of high interest because the geometric frustration is expected to give rise to highly degenerated ground states that may host exotic properties such as quantum spin liquid (QSL). Ca_10Cr_7O_28 has been reported to display all the features expected for a QSL. At present, most of the literature reports on samples synthesized with starting materials ratio CaO/Cr_2O_3 3:1, which leads to a material with small amounts of CaCrO_4 and CaO as secondary phases; this impurity excess affects not only the magnetic properties but also the structural ones. In this work, samples with starting material ratios CaO/Cr_2O_3 3:1, 2.9:1, 2.85:1, and 2.8:1 have been synthesized and studied by X-ray diffraction with Rietveld refinements, selected area electron diffraction measurements, high-resolution transmission electron microscopy (HRTEM), low-temperature magnetometry, and magnetic calorimetry. This result shows that a highly pure Ca_10Cr_7O_28 phase is obtained for a CaO/Cr_2O_3 ratio of 2.85:1 instead of the 3:1 usually reported; the incorrect stoichiometric ratio leads to a larger distortion of the corner-sharing triangular arrangement of magnetic ions Cr+5 with S = 1/2 in the Kagome lattice. In addition, our study reveals that there exists another frustration pathway which is an asymmetric zigzag spin ladder along the directions [211], [12-1], and [1- 1-1], in which the Cr-Cr distances are shorter than in the Kagome layers.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Evaluation of low-toxic hybrid sol-gel coatings with organic pH-sensitive inhibitors for corrosion protection of AA2024 aluminium alloy

  • Jaldo Serrano, Eva
  • López Sánchez, Jesús
  • García Galván, Federico
  • Serrano, Aída
  • Rodríguez De La Fuente, Óscar
  • Barranco, Violeta
  • Galván, Juan Carlos
  • Carmona Tejero, Noemí
Today’s environmental needs require the reduction of the weight of vehicles, thus reducing fuel consumption and associated emissions. For this reason, the use of light alloys is being studied, which, due to their reactivity, must be protected before use. In this work, the effectiveness of a hybrid sol-gel coating doped with various organic environmentally friendly corrosion inhibitors applied to an AA2024 lightweight aluminium alloy is evaluated. Some of the inhibitors tested are pH indicators, acting as both corrosion inhibitors and optical sensors for the surface of the alloy. Samples are subjected to a corrosion test in a simulated saline environment and characterised before and after the test. The experimental results regarding their best inhibitor performance for their potential application in the transport industry are evaluated.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Time-dependent AC magnetometry and chain formation in magnetite: the influence of particle size, initial temperature and the shortening of the relaxation time by the applied field

  • Morales Casero, Irene
  • Costo, Rocío
  • Mille, Nicolas
  • Carrey, Julian
  • Hernando Grande, Antonio
  • Presa Muñoz De Toro, Patricia Marcela De La
Magnetite nanoparticles (MNPs) with 12, 34 and 53 nm sizes have been measured by AC-magnetometry at 50 kHz and 57 mT maximum applied field. The MNPs form chains under the AC-field, and the dynamics of the formation can be studied by measuring hysteresis cycles at different times. The measurement time has been varied from 5 ms to 10 s and for different initial temperatures of 5, 25 and 50 degrees C. The chain formation, identified by the increase of susceptibility and remanence with the measurement time, appears only for 34 nm particles. It has been observed that saturation, remanence and susceptibility at low (high) fields increase (decrease) with time. For the other two samples, these magnitudes are independent of time. At low fields, the heating efficiency is higher at 5 degrees C than at 50 degrees C, whereas it shows an opposite behaviour at higher fields; the origin of this behaviour is discussed in the article. Additionally, the relaxation times, tau_N and tau_B, have been calculated by considering the influence of the applied field. Chain formation requires translation and rotation of MNPs; therefore, the Brownian mechanism plays a fundamental role. It is found that magnetic reversal for 12 nm MNPs is mainly due to Neel relaxation. However, in the case of 34 nm MNPs, both mechanisms, Neel and Brownian relaxation, can be present depending on the amplitude of the field; for mu H_0 < 22 mT, the physical rotation of the particle is the dominant mechanism; on the other hand, for mu H_0 > 22 mT, both mechanisms are present within the size distribution. This highlights the importance of taking the field intensity into account to calculate relaxation times when analysing the relaxation mechanisms of magnetic colloids subjected to AC fields.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Sol-gel synthesis control of iron-cobalt alloy/ferrite core/shell nanoparticles supported by a carbon medium with semi-hard magnetic features

  • Castellano Soria, Alberto
  • López Sánchez, Jesús
  • Serrano, Aida
  • Gorni, Giulio
  • Varela Del Arco, María
  • Sardinero, Ignacio
  • Carmona Tejero, Noemí
  • Hernando Grande, Antonio
  • Marín Palacios, María Pilar
  • Navarro Palma, Elena
We explore a simple and optimized approach for obtaining magnetic nanoparticle-carbon composites by a novel one-pot sol-gel method. In them, various metal cations ratios of Fe3+ and Co2+ are evaluated. The ratio of Fe:Co is a critical parameter that governs the presence of different crystalline phases with tailored magnetic properties. Interestingly, the smallest introduction of Co into the synthesis (19Fe:1Co) provides an abrupt emergence of the body-centered cubic (bcc) Fe-Co alloy, instead of the orthorhombic Pnma structure characteristic of the Fe3C intermetallic compound (1Fe:0Co). Advanced structural and electronic characterizations reveal the formation of Fe-Co/Co-ferrite core/shell nanoparticle structures embedded in a carbon matrix. The sphere-like nanoparticles range from 10 to 45 nm and the shells show a spinel structure with a thickness of 2–3 nm. In addition, X-ray absorption spectroscopy unveils that the oxidation state of Fe and Co cations is close to zero, demonstrating their predominant metallic character. The magnetic properties can be modulated by a precise control of the alloy composition varying the Co content, displaying saturation magnetization values close to ∼137 emu/g. The nanoparticles are mainly single magnetic domain with a considerable coercive field (∼450 Oe), higher than those reported in the literature for Fe-Co nanoparticles. This semi-hard character is due to a notable spring exchange effect emerged by passivating the surface of Fe-Co-bcc cores with a thin Co-ferrite-like shell
Docta Complutense
Publicación Artículo científico (JournalArticle)

A feasible pathway to stabilize monoclinic and tetragonal phase coexistence in barium titanate-based ceramics

  • Necib, Jallouli
  • López Sánchez, Jesús
  • Rubio Marcos, Fernando
  • Serrano, Aída
  • Navarro Palma, Elena
  • Peña Moreno, Álvaro
  • Taoufik, Mnasri
  • Smari, Mourad
  • Rojas Hernández, Rocío Estefanía
  • Carmona Tejero, Noemí
  • Marín Palacios, María Pilar
Multiphase coexistence has attracted significant interest in recent years because its control has entailed a significant breakthrough for the piezoelectric activity enhancement of lead-free piezoelectric oxides. However, the comprehension of phase coexistence still has many controversies including an adequate synthesis process and/or the role played by crystalline phases in functional properties. In this study, functional barium titanate [BaTiO_(3), (BTO)]-based materials with tunable functional properties were obtained by compositional modification via Bismuth (Bi) doping. Towards this aim, we systematically synthesized BTO-based materials by a sol-gel method, focusing on the control of Bi substitution in the BaTiO_(3) structure. In particular, we found that the substitution of Bi^(+3) leads to the stabilization of a monoclinic-tetragonal (M-T) phase boundary close to room temperature, which facilities the polarization process of the system. As a surprising result, we believe that the simple and cost-effective strategy and design principles described in this work open up the possibility of obtaining BTO-based lead-free ceramics with enhanced properties induced by the stabilization of the phase coexistence, expanding their application range.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breath biomarkers using magnonic wireless sensor based on magnetic nanoparticles

  • Aguilera Martín, Juan Diego
  • Arranz López, Daniel
  • Peña Moreno, Álvaro
  • Marín Palacios, María Pilar
  • Horrillo, M.C.
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Matatagui Cruz, Daniel
In this paper, an innovative device with gas remote-sensing capability is proposed, which is based on the interaction between magnetic nanoparticles and gases associated with exhaled breath biomarkers that can have a metabolic origin. Magnetite (Fe₃O₄) nanoparticles of around 30 nm have been used. The gas molecules adsorbed on surface modulate the magnetization of the nanoparticles and magnetostatic surface spin waves (MSSW) propagated on an yttrium iron garnet (YIG) thin film are used to detect this modulation by the induced frequency shift. The optimization of the remote gas sensor has been carried out through simulations of a magnetic model. Simulations show the feasibility of developing a high-performance remote sensor by encapsulating the nanostructures in a polytetrafluoroethylene (PTFE) tube and detecting part per million changes in their magnetization. The results show the possibility of developing new, inexpensive, reusable, contactless magnetic gas sensors employing spin waves as transductor. The developed sensor shows a high sensitivity and selectivity to concentrations as low as 50 ppm of different breath biomarkers.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Scattering of microwaves by a passive array antenna based on amorphous ferromagnetic microwires for wireless sensors with biomedical applications

  • Moya, Alberto
  • Archilla Sanz, Diego
  • Navarro Palma, Elena
  • Hernando Grande, Antonio
  • Marín Palacios, María Pilar
Co-based amorphous microwires presenting the giant magnetoimpedance effect are proposed as sensing elements for high sensitivity biosensors. In this work we report an experimental method for contactless detection of stress, temperature, and liquid concentration with application in medical sensors using the giant magnetoimpedance effect on microwires in the GHz range. The method is based on the scattering of electromagnetic microwaves by FeCoSiB amorphous metallic microwires. A modulation of the scattering parameter is achieved by applying a magnetic bias field that tunes the magnetic permeability of the ferromagnetic microwires. We demonstrate that the OFF/ON switching of the bias activates or cancels the amorphous ferromagnetic microwires (AFMW) antenna behavior. We show the advantages of measuring the performing time dependent frequency sweeps. In this case, the AC-bias modulation of the scattering coefficient versus frequency may be clearly appreciated. Furthermore, this modulation is enhanced by using arrays of microwires with an increasing number of individual microwires according to the antenna radiation theory. Transmission spectra show significant changes in the range of 3 dB for a relatively weak magnetic field of 15 Oe. A demonstration of the possibilities of the method for biomedical applications is shown by means of wireless temperature detector from 0 to 100 degrees C.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Optimization of multilayer graphene-based gas sensors by ultraviolet photoactivation

  • Peña Moreno, Álvaro
  • Matatagui Cruz, Daniel
  • Ricciardella, Filiberto
  • Sacco, Leandro
  • Vollebregt, Sten
  • Otero, Daniel
  • López Sánchez, Jesús
  • Marín Palacios, María Pilar
  • Horrillo, Mari Carmen
Nitrogen dioxide (NO2) is a potential hazard to human health at low concentrations, below one part per million (ppm). NO2 can be monitored using gas sensors based on multi-layered graphene operating at ambient temperature. However, reliable detection of concentrations on the order of parts per million and lower is hindered by partial recovery and lack of reproducibility of the sensors after exposure. We show how to overcome these longstanding problems using ultraviolet (UV) light. When exposed to NO2, the sensor response is enhanced by 290 % − 550 % under a 275 nm wavelength light emitting diode irradiation. Furthermore, the sensor’s initial state is completely restored after exposure to the target gas. UV irradiation at 68 W/m2 reduces the NO2 detection limit to 30 parts per billion (ppb) at room temperature. We investigated sensor performance optimization for UV irradiation with different power densities and target gases, such as carbon oxide and ammonia. Improved sensitivity, recovery, and reproducibility of UV-assisted graphene-based gas sensors make them suitable for widespread environmental applications.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Ferrimagnetic clusters as the origin of anomalous Curie-Weiss behavior in ZnFe_2O_4 antiferromagnetic susceptibility

  • Hernando Grande, Antonio
  • Cobos Fernández, Miguel Ángel
  • Jiménez, José Antonio
  • Llorente, Irene
  • García Escorial, Asunción
  • Presa Muñoz De Toro, Patricia Marcela De La
Different studies carried out in the last three decades on the magnetic susceptibility of the spinel ZnFe_2O_4 ferrite have revealed the positive character of its Curie-Weiss temperature, contradicting its observed antiferromagnetic behavior which is characterized by a well-defined susceptibility peak centered around the Neel temperature (10 K). Some approaches based on ab initio calculations and mixture of interactions have been attempted to explain this anomaly. This work shows how for very low values of the inversion parameter, the small percentage of Fe atoms located in tetrahedral sites gives rise to the appearance of ferrimagnetic clusters around them. Superparamagnetism of these clusters is the main cause of the anomalous Curie-Weiss behavior. This finding is supported experimentally from the thermal dependence of the inverse susceptibility and its evolution with the degree of inversion.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Control of the length of Fe73.5Si13.5Nb3CU1B9 microwires to be used for magnetic and microwave absorbing purposes

  • Birame Gueye, Papa Gorgui
  • López Sánchez, Jesús
  • Navarro Palma, Elena
  • Serrano, Aída
  • Marín Palacios, María Pilar
A combination of high-energy ball milling, vacuum filtering, and sedimentation processes has been demonstrated to be a useful approach to reduce, in a controlled way, the length of as-cast Fe_(73.5)Si_(13.5)Nb_3Cu_1B_9 amorphous magnetic microwires (MWs) and annealed material at 550 degrees C in nitrogen conditions. Homogeneous compositional microstructures with fairly narrow size distributions between 1300 and 11.7 mu m are achieved, exhibiting tunable response as a soft magnetic material and as a microwave absorber. From the magnetic perspective, the soft magnetic character is increased with smaller length of the MWs, whereas the remanence has the opposite behavior mainly due to the structural defects and the loss of the shape anisotropy. From the microwave absorption perspective, a novel potential applicability is tested in these refined microstructures. This innovation consists of coatings based on commercial paints with a filling percentage of 0.55% of MWs with different lengths deposited on metallic sheets. Large attenuation values around -40 dB are obtained in narrow spectral windows located in the GHz range, and their position can be varied by combining different optimized lengths of MW. As an example of this powerful mechanism for absorbing microwaves at specific frequencies, MW lengths of 2 mm and 50 mu m are chosen, where precise tailoring of the minimum reflection loss (R_L)is obtained in a range between 8.85 and 13.25 GHz. To confirm these experimental results, an effective medium standard model proposed for electrical permittivity is used. Experimental and theoretical results are consistent and these novel composites are also proposed as a feasible candidate for designing frequency-selective microwave absorbers on demand, with low filling percentages and high absorption intensity values.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Local induction heating capabilities of zeolites charged with metal and oxide MNPs for application in HDPE hydrocracking: a proof of concept

  • Muñoz, Marta
  • Morales, Irene
  • Costa, Cátia S.
  • Multigner, Marta
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Alonso Gómez, José Miguel
  • Silva, Joao M.
  • Ribeiro, Maria do Rosário
  • Torres, Belen
  • Rams, Joaquín
Zeolites are widely used in high-temperature oil refining processes such as fluid catalytic cracking (FCC), hydrocracking, and aromatization. Significant energy cost are associated with these processes due to the high temperatures required. The induction heating promoted by magnetic nanoparticles (MNPs) under radio frequency fields could contribute to solving this problem by providing a supplementary amount of heat in a nano-localized way, just at the active centre site where the catalytic process takes place. In this study, the potential of such a complementary route to reducing energetic requirements is evaluated. The catalytic cracking reaction under a hydrogen atmosphere (hydrocracking) applied to the conversion of plastics was taken as an application example. Thus, a commercial zeolite catalyst (H-USY) was impregnated with three different magnetic nanoparticles: nickel (Ni), cobalt (Co), maghemite (gamma-Fe_(2)O_(3)), and their combinations and subjected to electromagnetic fields. Temperature increases of approximately 80 degrees C were measured for H-USY zeolite impregnated with gamma-Fe_(2)O_(3) and Ni-gamma-Fe_(2)O_(3) due to the heat released under the radio frequency fields. The potential of the resulting MNPs derived catalyst for HDPE (high-density polyethylene) conversion was also evaluated by thermogravimetric analysis (TGA) under hydrogen atmosphere. This study is a proof of concept to show that induction heating could be used in combination with traditional resistive heating as an additional energy supplier, thereby providing an interesting alternative in line with a greener technology.