Pasar al contenido principal

PROTECCION ACTIVA Y FABRICACION ADITIVA DE ALEACIONES LIGERAS

RTI2018-096391-B-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD REY JUAN CARLOS

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Modulation of crystallinity through radiofrequency electromagnetic fields in PLLA/magnetic nanoparticles composites: A proof of concept

  • Multigner, Marta
  • Morales, Irene
  • Giacomone, Fernando
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Benavente, Rosario
  • Torres, Belén
  • Mantovani, Diego
  • Rams, Joaquín
To modulate the properties of degradable implants from outside of the human body represents a major challenge in the field of biomaterials. Polylactic acid is one of the most used polymers in biomedical applications, but it tends to lose its mechanical properties too quickly during degradation. In the present study, a way to reinforce poly-L lactic acid (PLLA) with magnetic nanoparticles (MNPs) that have the capacity to heat under radiofrequency electromagnetic fields (EMF) is proposed. As mechanical and degradation properties are related to the crystallinity of PLLA, the aim of the work was to explore the possibility of modifying the structure of the polymer through the heating of the reinforcing MNPs by EMF within the biological limit range f center dot H < 5 center dot x 10_(9) Am_(-1) center dot s_(-1). Composites were prepared by dispersing MNPs under sonication in a solution of PLLA. The heat released by the MNPs was monitored by an infrared camera and changes in the polymer were analyzed with differential scanning calorimetry and nanoindentation techniques. The crystallinity, hardness, and elastic modulus of nanocomposites increase with EMF treatment.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Induction heating in nanoparticle impregnated zeolite

  • Morales, Irene
  • Muñoz, Marta
  • Costa, Catia S.
  • Alonso, José M.
  • Silva, João Miguel
  • Multigner, Marta
  • Quijorna, Mario
  • Ribeiro, M. Rosário
  • Presa, Patricia de la
The ultra-stable Y (H-USY) zeolite is used as catalyst for the conversion of plastic feedstocks into high added value products through catalytic cracking technologies. However, the energy requirements associated with these processes are still high. On the other hand, induction heating by magnetic nanoparticles has been exploited for different applications such as cancer treatment by magnetic hyperthermia, improving of water electrolysis and many other heterogeneous catalytic processes. In this work, the heating efficiency of γ-Fe2O3 nanoparticle impregnated zeolites is investigated in order to determine the potential application of this system in catalytic reactions promoted by acid catalyst centers under inductive heating. The γ-Fe2O3 nanoparticle impregnated zeolite has been investigated by X-ray diffraction, electron microscopy, ammonia temperature program desorption (NH3-TPD), H2 absorption, thermogravimetry and dc and ac-magnetometry. It is observed that the diffusion of the magnetic nanoparticles in the pores of the zeolite is possible due to a combined micro and mesoporous structure and, even when fixed in a solid matrix, they are capable of releasing heat as efficiently as in a colloidal suspension. This opens up the possibility of exploring the application at higher temperatures., This research was funded by Ministerio de Ciencia e Innovación grant number RTI2018-095856-B-C21, MAT2015-66334-C3-3-R and RTI2018-096391-B-C31, Comunidad de Madrid Projects grant number P2018/NMT-4321 and CM-S2018/NMT-4411; Ayudas a la Movilidad PDI URJC 2018 and PDI URJC 2019 and Fundação para a Ciência e Tecnologia (Project UID/QUI/00100/2019 and FCT-CATSUS grant: PD/BD/12862/2017). The authors also acknowledge the technical support given by Fernando Giacomone financed by Spanish Ministry of Science and Innovation, PTA2015-10497-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sol-gel coatings doped with graphene nanoplatelets for improving the degradation rate and the cytocompatibility of AZ31 alloy for biomedical applications

  • Fernández-Hernán, J. P.
  • Torres, Belén
  • Martínez-Campos, Enrique
  • Rams, J.
SiO coatings doped with four different functionalized graphene nanoplatelets (COOH-GNPs) concentrations (from 0.005 to 1 wt%) were deposited on AZ31 magnesium substrates to control the corrosion rate and to increase the cytocompatibility of this alloy for MC3T3 pre-osteoblastic cells, to develop biodegradable implants for bone fracture and orthopedic applications. The results show that the highest nanoplatelets concentration promoted the generation of nanoparticle aggregates acting as crack-nucleation points embedded in the coating, decreasing the protective behavior of these coatings. Nanoplatelets concentrations of 0.005 wt% and 0.05 wt% led to obtaining crack-free coatings that provided an improved barrier effect. Cytocompatibility tests show that all the conditions, even the bare AZ31, led to cell proliferation. However, low cell adhesion was found in the bare substrate, contrary to the coated substrates. The coatings with the highest nanoplates concentrations augmented the metabolic activity of cell cultures. The sol-gel coating doped with 0.05 wt% COOH-GNPs presented the best corrosion rate control behavior and improved cytocompatibility, with the generation of a confluent preosteoblastic monolayer on its surface after one week of cell culture., The authors would like to acknowledge the financial support from the Ministerio de Ciencia e Innovación for FPI grant (MAT2015-66334- C3-1-R), Agencia Estatal de Investigaci ́on (Project RTI2018-096391-B- C31), and the Comunidad de Madrid (Project ADITIMAT-CM S2018/ NMT-4411)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulation of crystallinity through radiofrequency electromagnetic fields in plla/magnetic nanoparticles composites: A proof of concept

  • Multigner, M.
  • Morales, I.
  • Muñoz, M.
  • Bonache, V.
  • Giacomone, F.
  • Presa, P. de la
  • Benavente, Rosario
  • Torres, Belén
  • Mantovani, D.
  • Rams, J.
To modulate the properties of degradable implants from outside of the human body rep-resents a major challenge in the field of biomaterials. Polylactic acid is one of the most used polymers in biomedical applications, but it tends to lose its mechanical properties too quickly during degradation. In the present study, a way to reinforce poly-L lactic acid (PLLA) with magnetic nano-particles (MNPs) that have the capacity to heat under radiofrequency electromagnetic fields (EMF) is proposed. As mechanical and degradation properties are related to the crystallinity of PLLA, the aim of the work was to explore the possibility of modifying the structure of the polymer through the heating of the reinforcing MNPs by EMF within the biological limit range f·H < 5·× 10 Am. Composites were prepared by dispersing MNPs under sonication in a solution of PLLA. The heat released by the MNPs was monitored by an infrared camera and changes in the polymer were ana-lyzed with differential scanning calorimetry and nanoindentation techniques. The crystallinity, hardness, and elastic modulus of nanocomposites increase with EMF treatment., This research was funded by Community of Madrid projects ADITIMAT-CM -S2018/NMT- 4411 and S2018/NMT-4381-MAT4.0-CM.C; Spanish Ministry of Science and Innovation projects RTI2018-096391-B-C31, RTI2018-095856-B-C21 and PTA2015-10497-I; and Ayudas a la Movilidad PDI URJC 2018 and 2019
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anticorrosion and Cytocompatibility Assessment of Graphene-Doped Hybrid Silica and Plasma Electrolytic Oxidation Coatings for Biomedical Applications

  • Fernández-Hernán, J. P.
  • López, A. J.
  • Torres, Belén
  • Martínez-Campos, Enrique
  • Matykina, E.
  • Rams, J.
Magnesium AZ31 alloy substrates were coated with different coatings, including sol-gel silica-reinforced with graphene nanoplatelets, sol-gel silica, plasma electrolytic oxidation (PEO), and combinations of them, to improve cytocompatibility and control the corrosion rate. Electrochemical corrosion tests, as well as hydrogen evolution tests, were carried out using Hanks' solution as the electrolyte to assess the anticorrosion behavior of the different coating systems in a simulated body fluid. Preliminary cytocompatibility assessment of the different coating systems was carried out by measuring the metabolic activity, deoxyribonucleic acid quantification, and the cell growth of premyoblastic C2C12-GFP cell cultures on the surface of the different coating systems. Anticorrosion behavior and cytocompatibility were improved with the application of the different coating systems. The use of combined PEO + SG and PEO + SG/GNP coatings significantly decreased the degradation of the specimens. The monolayer sol-gel coatings, with and without GNPs, presented the best cytocompatibility improvement., The authors would like to acknowledge the financial support from the Ministerio de Ciencia e Innovación for the FPI grant (MAT2015-66334-C3-1-R), Agencia Estatal de Investigación (project RTI2018-096391-B-C31 and RTI2018-096391-B-C33), and the Comunidad de Madrid (project ADITIMAT-CM S2018/NMT-4411).