Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Palladium Nanoparticles Immobilized on the Amine-Functionalized Lumen of Halloysite for Catalytic Hydrogenation Reactions

  • Bedoya, Santiago
  • González-Vera, Daniela
  • Leal-Villarroel, Edgardo
  • Díaz de León, J. N.
  • Pecchi, Gina
  • Torres, Cecilia C.
  • Campos, Cristian H.
  • Domine, Marcelo Eduardo
[EN] Supported Pd-based catalysts have been widely applied in the hydrogenation of specific functional groups. Recent trends have focused on employing Pd-based heterogeneous catalysts supported on inorganic nanotubes, wherein inner surface functionalization modulates both palladium nanoparticle (Pd-NP) dispersion and the interaction between reactants and the catalyst surface, thereby influencing catalytic properties. This study aims to develop a catalytic system using amine-lumened halloysite nanotubes immobilizing Pd-NPs (Pd/HNTA) as catalysts for hydrogenation reactions. The formation of Pd-NPs within the organo-functionalized lumen-modified by 3-aminopropyltrimethoxysilane-is confirmed by transmission electron microscopy (TEM) imaging, which reveals a particle size of 2.2 +/- 0.4 nm. For comparison, Pd-NPs supported on pristine halloysite (Pd/HNTP) were used as control catalysts, displaying a metal particle size of 2.8 +/- 0.8 nm and thereby demonstrating the effect of organic functionalization on the halloysite nanotubes. Both catalysts were employed in the hydrogenation of furfural (FUR) and nitrobenzene (NB) as model reactions. Pd/HNTA demonstrated superior catalytic performance for both substrates, with TOF values of 880 h-1 for FUR and 946 h-1 for NB, and selectivities exceeding 98% for tetrahydrofurfuryl alcohol (THFOH) and aniline (AN), respectively. However, recyclability studies displayed that Pd/HNTA was deactivated at the 10 catalytic cycles during the hydrogenation of FUR, whereas, in the hydrogenation of NB, 5 catalytic cycles were achieved with maximum conversion and selectivity at 360 min. These results revealed that the liquid-phase environment plays a pivotal role in catalyst stability. In the hydrogenation of NB, the coproduction of H2O adversely affects the interaction between the Pd particles and the inner amine-modified surface, increasing the deactivation of the catalyst with reuse. Thus, the Pd/HNTA catalyst holds significant promise for the development of noble-metal-based catalysts and their application in the transformation of other reducible organic functional groups via hydrogenation reaction., The authors would like to thank the ANID project FONDECYT 1231352. M.E. Domine thanks the Spanish government (PID2021-125897OB-I00) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organo-modified halloysite nanotubes as supports for gold nanoparticles as highly recyclable catalyst for hydrogenation of nitroarenes

  • Bedoya, Santiago
  • Gonzalez-Vera, Daniela
  • Leal-Villarroel, Edgardo
  • Gracia, Francisco
  • Pecchi, Gina
  • Torres, Cecilia C.
  • Campos, Cristian H.
  • Domine, Marcelo Eduardo
[EN] Organo-modified halloysite nanotube (HNT) lumens were synthesized via an amine-silane-assisted method to encapsulate Au nanoparticles (Au-NPs) as catalysts for hydrogenation of nitroarenes. The obtained materials were characterized by attenuated total reflectance Fourier-transform infrared spectroscopy, zeta potential measurements, N2 adsorption-desorption isotherms at-196 degrees C, X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, and transmission electron microscopy. The Au-NPs were uniformly distributed within the HNT lumen. An increase in Au loading (from 0.10 to 0.50 wt%) resulted in a broader Au-NPs size distribution. The catalysts were evaluated for nitrobenzene hydrogenation as test reaction under moderate reaction conditions (30 degrees C and 10 bar H2 pressure in ethanol) to assess their performance and reusability. Results indicate that the catalysts are sensitive to variations in the Au-NPs size in the range of 1.5-6.5 nm. The catalyst containing 0.10 wt% Au exhibited exceptional stability and recyclability, retaining its catalytic activity with minimal loss over at least 10 consecutive reuse cycles. In addition, the best catalyst displayed a high efficiency and selectivity in the hydrogenation of pharmaceutical-based nitroarenes. The proposed organo-modified HNT material offers an innovative route for synthesizing efficient and reusable metal-based catalysts demonstrating significant potential for their use in another similar catalytic processes., The authors would like to thank the ANID project FONDECYT 1231352. M.E. Domine thanks Spanish government (PID2021-125897OB-I00) for financial support. The authors would like to thank to the Institute of Applied Economic Geology of the University of Concepcion for providing the facility to perform mineralogical analyses in the X-ray Laboratory.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Platinum single sites supported on defected hydrogen-titanate nanotubes as selective catalyst for tandem synthesis of 3-methylindoles from nitrocompounds and acetol

  • Leal-Villarroel, Edgardo
  • González-Vera, Daniela
  • Serp, Philippe
  • Campos, Cristian H.
  • Torres, Cecilia C.
  • Domine, Marcelo Eduardo
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
[EN] Herein, we report Pt single atom (SA) - nanoparticle (NPs) supported on reduced titania nanotubes as an alternative route to obtain 3-methylindole (3-ML) from nitrobenzene and acetol as starting materials. 1 wt% Pt catalyst supported on TiO2, pristine titania nanotubes and reduced titania were prepared and characterized by techniques such as EPR, DRX, HR-TEM, N2 adsorption-desorption isotherms, to confirm the obtention Pt SA-NPs systems with sizes between 1.5 and 4.8 nm. The catalyst on reduced titania possesses improved activity and selectivity in the synthesis of 3-ML compared to the control systems, showing a high-moderate production of the heterocycle only in the presence of Pt SA. The temperature effect and a series of 4-substituited nitrobenzenes were used to evaluate the scope of the obtained catalyst in the production of indoles scaffolds. Recyclability studies show that the best catalyst proves to have an important efficiency obtaining conversion of nitrobenzene higher than 98 % and active for 7 consecutive reaction cycles. To the best of our knowledge our results are pioneers in the catalytic synthesis of 3-methylindole using nitrobenzene and acetol since it is an unexplored reaction route., This research was funded by the Agencia Nacional de Investigacion y Desarrollo de Chile programa FONDECYT-ANID grant number 1231395, grant number 1231352, PROGRAMA DE COOPERACION CIENTIFICA ECOS-ANID 210036 and ECOS Sud-ANID (project ECOS no C21E03) . Daniela Gonza lez-Vera and Marcelo E. Domine thank ITQ (UPV-CSIC) and MICINN of Spain (PID-2021-125897-OBI00) for financial support. Edgardo Leal thanks Grant ANID 242230083.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bimetallic Nickel and Cobalt nanoparticles supported on TiO2 as catalyst for the synthesis of 2-substituted benzimidazole by reductive amination-cyclization of 2-nitroaniline and aldehydes

  • González-Vera, Daniela
  • Leal-Villarroel, Edgardo
  • Bustamante, Tatiana M.
  • Díaz de León, Jorge Noé
  • Torres, Cecilia C.
  • Campos, Cristian H.
  • Lucía
  • Domine, Marcelo Eduardo
[EN] The benzimidazole nucleus finds respectable space and interest among nitrogen heterocycles, whether for its applications or the number of synthetic methodologies employed in their preparation. Recent trends show that interest in the scientific fraternity is now bending towards exploring the use of bimetallic NiCo-based heterogeneous catalysts for the synthesis of benzimidazoles. This work is aimed at the development of new catalytic systems obtained from the H2-assisted reduction of NixCo1-xTiO3 mixed oxides to produce bimetallic NixCo1-x/ TiO2 (x = 0.0, 0.1, 0.3, 0.5, and 1.0) catalysts for the tandem selective production of 2-substituted benzimidazole scaffolds from 2-nitroaniline and aldehydes. The physicochemical characterization displayed the formation of the NiCo alloy supported on TiO2-rutile and the active phase are almost in the zero-valent state after the reduction treatment. The catalytic activity showed that all the catalysts are active in the tandem synthesis of 2-benzimid-azole, and the selectivity to the target product is a function of the Ni content in the catalyst. The most efficient and selective system was Ni0.1Co0.9/TiO2, which remained active after 10 consecutive cycles. The Ni0.1Co0.9 composition in the catalyst formulation affords optimal physicochemical properties for enhanced catalytic performance and enables the recyclability ability to produce the target product. Thus, our results provide a valuable and practical method by which aromatic N-heterocycles of pharmaceutical relevance can be obtained via catalytic tandem reaction using non-noble based catalysts., The authors would like to thank the ANID projects FONDECYT 1231352 and FONDECYT 1231395. D. Gonzalez-Vera ¿ is grateful for her doctoral scholarship ANID 21200167 and ITQ (UPV-CSIC) for support during her research stay, and E Leal thanks Grant ANID 21220327. L. Camarena and M.E. Domine thanks Spanish government (PID2021 125897OB-I00) for financial support. The authors would like to thank to David Domiguez by his expert technical assistance in the XPS analysis and the Institute of Applied Economic Geology of the University of Concepcion ¿ for providing the facility to perform mineralogical analyses in the X-ray Laboratory.