Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Total oxidation of propane using CeO2 and CuO-CeO2 catalysts prepared using templates of different nature

  • Solsona, B.
  • Sanchis, R.
  • Dejoz, A. M.
  • García, T.
  • Ruiz-Rodríguez, L.
  • López Nieto, J. M.
  • Cecilia, J. A.
  • Rodríguez-Castellón, E.
Several CeO2 and CuO-CeO2 catalysts were prepared using different methods, i.e., a homogeneous precipitation with urea, a nanocasting route using CMK-3 carbon as a hard template and a sol–gel process using Poly(methyl methacrylate) (PMMA) polymer as a soft template, and tested in the total oxidation of propane. The catalysts were characterized by a number of physicochemical techniques (XRD, N2 adsorption, TPR, XPS, Raman spectroscopy) showing distinct characteristics. For each series, Cu-Ce-O catalysts with low Cu-loadings (5 wt % CuO) showed the highest activity, higher than those samples either without copper or with high Cu-loading (13 wt % CuO). The incorporation of copper leads to an increase of the concentration of bulk defects but if the Cu-loading is too high the surface area drastically falls. The highest activity in the total oxidation of propane was achieved by Cu-containing ceria catalysts synthesized using a polymer as a template, as this method yields high surface area materials. The surface area and the number of bulk/sub-surface defects of the ceria seem to be the main properties determining the catalytic activity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

In-situ synthesis of hydrogen peroxide in tandem with selective oxidation reactions: a review

  • Puértolas Lacambra, Begoña
  • Hill, Alf
  • García Martínez, Tomás
  • Solsona Espriú, Benjamín
  • Torrente Murciano, Laura
One-pot combination of the in-situ generation of hydrogen peroxide (H2O2) with selective oxidation reactions enhances the environmental and economic attractiveness of the use of H2O2 as green oxidant at industrial scale. This tandem reaction improves not only the safety aspects associated to H2O2 storage and transportation but also reduces the capital and operation costs. This review covers the progress in the field focussing on the areas of catalysis development, mechanistic understanding and engineering approaches (such as membrane reactors) for specific systems involving epoxidation of propylene oxide, hydroxylation of benzene, oxygenate synthesis from methane and Fenton processes, highlighting the main challenges to overcome in the near future.