Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radial turbine sound and noise characterisation with acoustic transfer matrices by means of fast one-dimensional models

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Inhestern, Lukas Benjamin
  • Soler-Blanco, Pablo
[EN] Estimating correctly the turbine acoustics can be valuable during the engine design stage; in fact, it can lead to a more optimised design of the silencer and aftertreatment, as well as to better prediction of the scavenging effects. However, obtaining the sound and noise emissions of radial turbocharger turbines with low computational costs can be challenging. To consider these effects in a time-efficient manner, the acoustic response of single-entry radial turbines can be characterised by means of acoustic transfer matrices that change with the operating conditions. Exploiting the different time-scales of the acoustic phenomena and the change in the operating point of the turbine, lookup tables of acoustic transfer matrices can be computed. Then, the obtained characterisation can be used in mean-value engine models. This article presents a method for generating these lookup tables by means of fast one-dimensional simulations of thoroughly validated fidelity, in terms of both acoustics and extrapolation capabilities. Due to the inherent behaviour of radial turbines, the number of computations needed to fill the lookup tables is relatively small, so the method can be used as a simple preprocessing phase before mean-value simulation campaigns.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental validation of a one-dimensional twin-entry radial turbine model under non-linear pulse conditions

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Soler-Blanco, Pablo
  • Cheung, Raymond
[EN] This article presents the experimental validation of a complete integrated one-dimensional twin-scroll turbine model able to be used in reciprocating internal combustion engine unsteady simulations. A passenger car with a twin-entry-type turbine has been tested under engine-like pulse conditions by means of a specifically built gas stand. To obtain high-resolution quality data, the turbine and turbine line pipes have been instrumented with mean and instantaneous pressure sensors as well as temperature and mass flow sensors, employing a uniquely designed rotating valve for the pulse generation. This experimental configuration enables to obtain the pressure decomposition in both inlets and outlets of the turbine. Using the experimental data obtained, the model is fully validated, with special focus on the reflected and transmitted components for analysing the performance of the model and its non-linear acoustics prediction capabilities. The model presents a very high degree of correlation with the experimental results, providing a range of errors similar to the uncertainty of the measurements, even in the medium- and high-frequency spectra., The author(s) disclosed receipt of the following financial support for the research, authorship and/or publication of this article: This work was supported by the 'Ayuda a Primeros Proyectos de Investigacion' (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain. P.S. was partially supported through contract FPI-2017-S2-1428 of Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Methodology for Measuring Turbocharger Adiabatic Maps in a Gas-Stand and Its Usage for Calibrating Control Oriented and One-Dimensional Models at Early ICE Design Stages

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Gómez-Vilanova, Alejandro|||0000-0002-6627-7075
  • Guilain, Stephane
  • Batard, Samuel
[EN] In this work, a methodology is proposed to standardize turbochargers testing based on measuring the maps twice: in close to adiabatic and in diathermal conditions. Along the paper, it is discussed with special detail the impact of the procedure followed to achieve said quasi-adiabatic conditions in both the energy balance of the turbocharger and the testing complexity. As a conclusion, the paper proposes a methodology which combines quasi-adiabatic tests (cold and hot gas flow) with diathermal tests (hot gas flow) in order to extract from a turbocharger gas-stand all information needed by engine designers interested in controlling or one-dimensional-modeling the internal combustion engine (ICE). The methodology is completed with a guide for calibrating said control-oriented turbocharger models in order to separate aerodynamic efficiency (adiabatic) from heat transfer (HT) losses and from friction losses in the analysis of the turbocharger performance. The outsourced calibration of the turbocharger model allows avoiding uncertainties in the global ICE model calibration, what is very interesting for turbochargers benchmarking at early ICE-turbo matching stages or for global system analysis at early control design stages., Alejandro Gomez Vilanova is partially supported through contract Subprograma 1 (PAID-01-18) of Universitat Politecnica de Valencia. This work was partially funded ayuda a Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia of Universitat Politecnica de Valencia