Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of a Double-Entry Turbine Model Coupled With a One-Dimensional Calibrated Engine Model at Engine Full Load Curves

  • Galindo, José|||0000-0001-6068-182X
  • Serrano, J.R.|||0000-0003-0692-3917
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Samala, Vishnu
  • Guilain, Stephane
  • Batard, Samuel
[EN] Turbocharging is one of the foremost ways of engine downsizing and represents the leading technology for reducing the engine CO2 emission standards in gasoline engine application. Turbocharger turbine always faces high unsteadiness of flow coming from the reciprocating internal combustion engines. Besides, increasing levels of engine downsizing include rising degrees of pulse charging. Utilization of pulse energy in the engine exhaust and reducing the interferences between the cylinders using the double-entry turbines is a vital element in solving the low-end-torque targets and improving rated power in highly boosted four-cylinder engines. The present paper describes a model of double-entry turbines. The model' aim is to accommodate an efficient boundary condition to turbocharged engine models with zero and one-dimensional gas dynamic codes. The model is based on the simple procedure of testing and systematizing the performance maps of these turbines with different flow admission conditions. However, the described model in the present paper is capable of extrapolating operating conditions that differ from those included in the turbine maps because a turbocharger turbine with an engine usually works instantaneously and away from the narrow range of data that are measured in the gas stand. The described model has been implemented in a one-dimensional gas dynamic code and has been used to calculate unsteady operating conditions coming from the engine. The results obtained from the whole engine simulation show that the model can produce all the full load engine variables such as air mass flow and brake torque in a reasonable degree of agreement with the experimental data that are obtained from the engine test bench., VS was partially supported through post-doctoral contract 2020-UPV-SUB.2-12450 of Science, Technology and Innovation in research structures of Universitat Politecnica de-Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Experimental and Modeling Strategy for Obtaining Complete Characteristic Maps of Dual-Volute Radial Inflow Turbines

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Samala, Vishnu
  • Guilain, Stephane
  • Batard, Samuel
[EN] Despite the importance of turbocharged engines with dual-volute turbines, their characteristic maps and fully predictive modeling using 1D gas dynamic codes are not well established yet. The complexity of unsteady flow and the unequal admission of these turbines, when operating with pulses of engine exhaust gas, makes them a challenging system. This is mainly due to the unequal flow admission, which generates an additional degree-of-freedom with respect to well-known single entry vanned or vaneless turbines. This paper has as the main novelty a simple procedure for characterizing experimentally and elaborating characteristic maps of these turbines with unequal flow conditions. This method of analysis allows for easy interpolation within the proposed characteristic maps or conceiving simple models for calculating and extrapolating full performance parameters of dual-volute turbines. Two innovative 0D mean-line models are described that require a minimum quantity of experimental data for calibrating both: the mass flow parameter model and the isentropic efficiency model. Both models are predictive either in partial or unequal flow conditions using as inputs: the mass flow ratio and the total temperature ratio between branches; the blade speed ratio and the pressure ratio in each branch. These six inputs are generally instantaneously provided by 1D gas-dynamics codes. Therefore, the novelty of the model is its ability to be used in a quasi-steady way for dual volute turbines performance prediction. This can be done instantaneously when turbines are calculated operating at turbocharged engines under pulsating and unequal flow conditions., Vishnu Samala was partially supported through post-doctoral contract 2020-UPV-SUB.2-12450, Spanish system of Science, Technology and Innovation in research structures of Universitat Politecnica de Valencia (UPV). This work was partially funded by the 'Ayuda a Primeros Proyectos de-Investigacion' (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la UPV, Valencia, Spain. The authors wish to thank M.A. Ortiz and R. Carrascosa for their invaluable work during the experimental setup and testing campaign.