Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Earned Schedule min-max: Two new EVM metrics for monitoring and controlling projects

  • Ballesteros Pérez, Pablo
  • Sanz Ablanedo, Enoc
  • Mora Melià, Daniel
  • González Cruz, María Carmen
  • Fuentes Bargues, José Luis
  • Pellicer, Eugenio
[EN] Earned Value Management (EVM) is a well-known project management technique for monitoring project progress. Over the last 15 years, many promising EVM metrics have been proposed to get, among other improvements, better actual project duration and cost estimates. Papers comparing the performance of all these metrics are, however, scarce and sometimes contradictory. In this paper, a simulation and empirical comparison of 26 deterministic project duration forecasting techniques under the EVM framework is developed. Among them, two new metrics: Earned Schedule min (ESmin) and Earned Schedule max (ESmax) are proposed. ESmin and ESmax offer a new and simpler activity-level calculation approach of the traditional Earned Schedule metric. Top performing (most accurate) metrics: Earned Schedule (ES), Earned Duration (ED) and Effective Earned Schedule (ES(e)) with Performance Factor 1 (PF = 1), are slightly outperformed by the new metrics which also offer some interesting applications for enhanced project control, SI, The first author acknowledges the Spanish Ministry of Science, Innovation and Universities for his Ramon y Cajal contract (RYC-2017-22222) co-funded by the European Social Fund. This work was also supported by the second author's “Estancias de movilidad en el extranjero José Castillejo para jóvenes doctores, 2017 (grant ref. CAS17/00488)” and the fourth author's “Estancias de profesores e investigadores senior en centros extranjeros, incluido el programa “Salvador de Madariaga” 2018 (grant ref. PRX18/00381)”, both also from the Spanish Ministry of Science, Innovation and Universities
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave oscillator and frequency comb in a silicon optomechanical cavity with a full phononic bandgap

  • Mercadé, Laura|||0000-0002-4994-7727
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Martín, Leopoldo L.
  • Navarro-Urrios, Daniel
[EN] Cavity optomechanics has recently emerged as a new paradigm enabling the manipulation of mechanical motion via optical fields tightly confined in deformable cavities. When driving an optomechanical (OM) crystal cavity with a laser blue-detuned with respect to the optical resonance, the mechanical motion is amplified, ultimately resulting in phonon lasing at MHz and even GHz frequencies. In this work, we show that a silicon OM crystal cavity performs as an OM microwave oscillator when pumped above the threshold for self-sustained OM oscillations. To this end, we use an OM cavity designed to have a breathing-like mechanical mode at 3.897 GHz in a full phononic bandgap. Our measurements show that the first harmonic of the detected signal displays a phase noise of ¿¿100 dBc/Hz at 100 kHz. Stronger blue-detuned driving leads eventually to the formation of an OM frequency comb, whose lines are spaced by the mechanical frequency. We also measure the phase noise for higher-order harmonics and show that, unlike in Brillouin oscillators, the noise is increased as corresponding to classical harmonic mixing. Finally, we present real-time measurements of the comb waveform and show that it can be fitted to a theoretical model recently presented. Our results suggest that silicon OM cavities could be relevant processing elements in microwave photonics and optical RF processing, in particular in disciplines requiring low weight, compactness and fiber interconnection., This work was supported by the European Commission (PHENOMEN H2020-EU-713450); Programa de Ayudas de Investigacion y Desarrolo (PAID-01-16) de la Universitat Politecnica de Valencia; Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B, PRX18/00126) and Generalitat Valenciana (PROMETEO/2019/123, PPC/2018/002, IDIFEDER/2018/033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optomechanical microwave oscillators

  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Optomechanical interaction in optical dielectric cavities can be used to generate high-purity microwave tones, giving rise to optomechanical microwave oscillators. Here, we introduce the main properties of these devices, which can be implemented in photonic integrated chips, and envisage its deployment in the mid-term in microwave photonics applications., This work was supported by the European Commission (PHENOMEN H2020-EU-713450; SIOMO H2020-EU-945915); Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B, PRX18/00126) and Generalitat Valenciana (BEST/ 2020/178, PROMETEO/2019/123, PPC/2018/002, IDIFEDER/ 2018/033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Speed Infrared Measurement of Injector Tip Temperature during Diesel Engine Operation

  • Gander, Alex
  • Sykes, Dan
  • De Sercey, Guillaume
  • Kennaird, Dave
  • Gold, Martin
  • Pearson, Richard J.
  • Crua, Cyril
  • Payri, Raul|||0000-0001-7428-5510
[EN] Pre-catalyst engine emissions and detrimental injector deposits have been widely associated with the near-nozzle fluid dynamics during and after the injection events. Although the heating and evaporation of fuel films on the nozzle surface directly affects some of these processes, there are no experimental data for the transient evolution of nozzle surface temperature during typical engine conditions. In order to address this gap in knowledge, we present a non-intrusive approach for the full-cycle time resolved measurement of the surface temperature of production nozzles in an optical engine. A mid-wave infrared high-speed camera was calibrated against controlled conditions, both out of engine and in-engine to account for non-ideal in surface emissivity and optical transmissivity. A custom-modified injector with a thermocouple embedded below the nozzle surface was used to validate the approach under running engine conditions. Calibrated infrared thermography was then applied to characterise the nozzle temperature at 1200 frames per second, during motored and fired engine operation, thus revealing for the first time the effect of transient operating conditions on the temperature of the injector nozzle's surface., This work was supported by the UK's Engineering and Physical Science Research Council (EPSRC grant EP/S513751/1) and BP International Ltd. Raul Payri was hosted at the University of Brighton under the Salvador de Madariaga programme (reference PRX18/00243) from Ministerio de Ciencia, Innovacion y universidades from the Spanish Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radiationless anapole states in on-chip photonics

  • Díaz-Escobar, Evelyn
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Bauer, Thomas
  • Barreda, Ángela I.
  • Kuipers, K.
[EN] High-index nanoparticles are known to support radiationless states called anapoles, where dipolar and toroidal moments interfere to inhibit scattering to the far field. In order to exploit the striking properties arising from these interference conditions in photonic integrated circuits, the particles must be driven in-plane via integrated waveguides. Here, we address the excitation of electric anapole states in silicon disks when excited on-chip at telecom wavelengths. In contrast to normal illumination, we find that the anapole condition¿identified by a strong reduction of the scattering¿does not overlap with the near-field energy maximum, an observation attributed to retardation effects. We experimentally verify the two distinct spectral regions in individual disks illuminated in-plane from closely placed waveguide terminations via far-field and near-field measurements. Our finding has important consequences concerning the use of anapole states and interference effects of other Mie-type resonances in high-index nanoparticles for building complex photonic integrated circuitry., E.D.E. acknowledges funding from Generalitat Valenciana under grant GRISOLIAP/2018/164. A.I.B. acknowledges financial support by the Alexander von Humboldt Foundation. T.B. and L.K. acknowledge support from the European Research Council (ERC) Advanced Investigator Grant no. 340438-CONSTANS. E.P.-C. gratefully acknowledges support from the Spanish Ministry of Science and Innovation under grant FJCI-2015-27228 and postdoctoral research stay grant CAS19/00349. A.M. thanks funding from Generalitat Valenciana (Grants No. PROMETEO/2019/123, BEST/2020/178 and IDIFEDER/2018/033) and Spanish Ministry of Science, Innovation and Universities (Grants No. PRX18/00126 and PGC2018-094490-BC22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optomechanical Modulation Spectroscopy of Bound States in the Continuum in a Dielectric Metasurface

  • Zanotto, S.
  • Conte, G.
  • Navarro-Urrios, Daniel
  • Tredicucci, A.
  • Pitanti, A.
  • Bellieres, Laurent Christophe
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Elusive features in photonic and electronic devices can be detected by means of advanced, time-domain spectroscopic techniques. In this paper we introduce a modulation spectroscopy based on the optomechanical interaction of photonic and mechanical modes. Applying the technique to a Si metasurface and its drumlike mechanical modes, we detect narrow-band quasi-bound-state-in-the-continuum (quasi-BIC) modes close to normal incidence, where their measurement can be hindered by a high-symmetry protection and undesired background modes. Showing a visibility enhancement of more than one order of magnitude, the optomechanical modulation spectroscopy can be an innovative tool for precise spectroscopy of a wide set of photonic devices, including the goal of measuring purely symmetry protected BIC resonances., A.M. acknowledges funding from Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B-C21, PRX18/00126) and Generalitat Valenciana (PROMETEO/2019/123, IDIFEDER/2021/061).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Duration and Cost Variability of Construction Activities: An Empirical Study

  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
  • González-Cruz, María-Carmen|||0000-0002-6987-5732
  • Sanz-Ablanedo, E.
  • Soetanto, R.
  • Larsen, G.D.
  • Cerezo-Narváez, A.
[EN] The unique nature of construction projects can mean that construction activities often suffer from duration and cost variability. Because this variability is unplanned, it can present a problem when attempting to complete a project on time and on budget. Various factors causing this variability have been identified in the literature, but they predominantly refer to the nature and/or context of the whole project rather than specific activities. In this paper, the order of magnitude of and correlation between activity duration and cost variability is analyzed in 101 construction projects with over 5,000 activities. To do this, the first four moments (mean, standard deviation, skewness, and kurtosis) of actual versus planned duration and cost (log) ratios are analyzed by project, phase of execution, and activity type. Results suggest that, contrary to common wisdom, construction activities do not end late on average. Instead, the large variability in the activity duration is the major factor causing significant project delays and cost overruns. The values of average activity duration and cost variability gathered in this study will also serve as a reference for construction managers to improve future construction planning and project simulation studies with more realistic data., The first author acknowledges the Spanish Ministry of Science, Innovation and Universities for his Ramon y Cajal contract (RYC-2017-22222) cofunded by the European Social Fund. This work was also supported by the second author's "Estancias de movilidad en el extranjero Jose Castillejo para jovenes doctores, 2017 (Grant Ref. CAS17/00488)" and the fourth author's "Estancias de profesores e investigadores senior en centros extranjeros Salvador de Madariaga 2018 (Grant Ref. PRX18/00381)," both from the Spanish Ministry of Science, Innovation and Universities. The first and last authors also acknowledge the help received by the research group TEP-955 from the PAIDI (Junta de Andalucia, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a fast-virtual CFR engine model and its use on autoignition studies

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Lago-Sari, Rafael
  • Fogué-Robles, Álvaro
  • Alemahdi, Nika
  • Tunér, Martin
  • López Pintor, Darío
[EN] Homogenous charge compression ignition engines have been studied as an alternative to the conventional diesel combustion to attain high efficiency with ultra-low NOx and soot emissions for a wide variety of fuels. However, its usage in real applications has been restricted due to the difficulties regarding combustion control and operating range extension. The modification of the fuel characteristics may be a pathway to solve the previous hurdles. Therefore, this research presents a relevant methodology to assess the fuel response to HCCI boundary conditions based on 0-D and 1-D modelling for detailed chemistry solution and state conditions definition, respectively. The results suggest that the methodology can predict the early stages of the fuel oxidation with good accuracy. For the objective of predicting the start of combustion, the best results are obtained using tabulated chemistry when investigating fuels that have pre reactions and a low temperature heat release. As the oxidation process progresses, the deviation of the pressure-temperature trajectory from non-reactive to reactive conditions after the low temperature heat release decreases the predictive capability to some extent. Nonetheless, the methodology outcomes are still valid as a qualitative metric for reactivity determination as well as the intermediate and high temperature ignition delay, This work has been partially funded by Spanish Ministry of Science, Innovation and Universities under the ¿Salvador de Madariaga¿ grant (PRX18/00131) and by the Swedish Energy Agency under the project ¿Future Alternative Transportation Fuels¿ and the project number 41139-1. The project partners were F3, Lantmannen, ¿ Perstorp AB, Preem, Scania AB, st1, Saybolt Sweden AB, Stena Line, Volvo AB, and Volvo Cars
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vertical Engineering for Large Brillouin Gain in Unreleased Silicon-Based Waveguides

  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Korovin, Alexander V.
  • Pennec, Yan
  • Ahopelto, Jouni
  • Djafari-Rouhani, Bahram
[EN] Strong acousto-optic interaction in high-index waveguides and cavities generally requires the releasing of the high-index core to avoid mechanical leakage into the underlying low-index substrate. This complicates fabrication, limits thermalization, reduces the mechanical robustness, and hinders large-area optomechanical devices on a single chip. Here, we overcome this limitation by employing vertical photonic-phononic engineering to drastically reduce mechanical leakage into the cladding by adding a pedestal with specific properties between the core and the cladding. We apply this concept to a silicon-based platform, due to the remarkable properties of silicon to enhance optomechanical interactions and the technological relevance of silicon devices in multiple applications. Specifically, the insertion of a thick silicon nitride layer between the silicon guiding core and the silica substrate contributes to reducing gigahertz-frequency phonon leakage while enabling large values of the Brillouin gain in an unreleased platform. We numerically obtain values of the Brillouin gain around 300 ( W m ) ¿ 1 for different configurations, which could be further increased by operation at cryogenic temperatures. These values should enable Brillouin-related phenomena in centimeter-scale waveguides or in more compact ring resonators. Our findings could pave the way toward large-area unreleased-cavity and waveguide optomechanics on silicon and other high-index photonic technologies., This work was supported by the European Commission (PHENOMEN Grant No. H2020-EU-713450), the Universitat Politecnica de Valencia (Grant No. PAID-01-169), the Ministerio de Ciencia, Innovacion y Universidades (Grants No. PGC2018-094490-B and No. PRX18/00126), and the Generalitat Valenciana (Grant No. PROMETEO/2019/123)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Earned Schedule min-max: Two new EVM metrics for monitoring and controlling projects

  • Ballesteros-Pérez, Pablo|||0000-0002-4629-9664
  • González-Cruz, María-Carmen|||0000-0002-6987-5732
  • Fuentes Bargues, José Luis|||0000-0003-4877-3291
  • Pellicer, Eugenio|||0000-0001-9100-0644
  • Sanz-Ablanedo, E.
  • Mora-Melià, Daniel
[EN] Earned Value Management (EVM) is a well-known project management technique for monitoring project pro-gress. Over the last 15 years, many promising EVM metrics have been proposed to get, among other improve-ments, better actual project duration and cost estimates. Papers comparing the performance of all these metricsare, however, scarce and sometimes contradictory.In this paper, a simulation and empirical comparison of 26 deterministic project duration forecasting tech-niques under the EVM framework is developed. Among them, two new metrics: Earned Schedule min (ESmin) andEarned Schedule max (ESmax) are proposed.ESminandESmaxoffer a new and simpler activity-level calculationapproach of the traditional Earned Schedule metric. Top performing (most accurate) metrics: Earned Schedule(ES), Earned Duration (ED) and Effective Earned Schedule (ES(e)) with Performance Factor 1 (PF= 1), areslightly outperformed by the new metrics which also offer some interesting applications for enhanced projectcontrol., The first author acknowledges the Spanish Ministry of Science, Innovation and Universities for his Ramon y Cajal contract (RYC-2017-22222) co -funded by the European Social Fund. This work was also supported by the second author's "Estancias de movilidad en el extranjero Jose Castillejo para jovenes doctores, 2017 (grant ref. CAS17/00488)" and the fourth author's "Estancias de profesores e investigadores senior en centros extranjeros, incluido el programa "Salvador de Madariaga" 2018 (grant ref. PRX18/00381)", both also from the Spanish Ministry of Science, Innovation and Universities
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The mechanisms of potassium loss in acute myocardial ischemia: New insights from computational simulations

  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
  • González-Ascaso, Ana
  • Rodriguez Matas, Jose F.
[EN] Acute myocardial ischemia induces hyperkalemia (accumulation of extracellular potassium), a major perpetrator of lethal reentrant ventricular arrhythmias. Despite considerable experimental efforts to explain this pathology in the last decades, the intimate mechanisms behind hyperkalemia remain partially unknown. In order to investigate these mechanisms, we developed a novel computational model of acute myocardial ischemia which couples a) an electrophysiologically detailed human cardiomyocyte model that incorporates modifications to account for ischemia-induced changes in transmembrane currents, with b) a model of cardiac tissue and extracellular K (+) transport. The resulting model is able to reproduce and explain the triphasic time course of extracellular K (+) concentration within the ischemic zone, with values of [ K + ] o close to 14 mmol/L in the central ischemic zone after 30 min. In addition, the formation of a [ K + ] o border zone of approximately 1.2 cm 15 min after the onset of ischemia is predicted by the model. Our results indicate that the primary rising phase of [ K + ] o is mainly due to the imbalance between K (+) efflux, that increases slightly, and K (+) influx, that follows a reduction of the NaK pump activity by more than 50%. The onset of the plateau phase is caused by the appearance of electrical alternans (a novel mechanism identified by the model), which cause an abrupt reduction in the K (+) efflux. After the plateau, the secondary rising phase of [ K + ] o is caused by a subsequent imbalance between the K (+) influx, which continues to decrease slowly, and the K (+) efflux, which remains almost constant. Further, the study shows that the modulation of these mechanisms by the electrotonic coupling is the main responsible for the formation of the ischemic border zone in tissue, with K (+) transport playing only a minor role. Finally, the results of the model indicate that the injury current established between the healthy and the altered tissue is not sufficient to depolarize non-ischemic cells within the healthy tissue., This work was supported by the "Programa Salvador de Madariaga 2018" of the Spanish Ministry of Science, Innovation and Universities (Grant Reference PRX18/00489), by Grant PID 2019-104356RB-C41 funded by the Spanish Ministry of Science and Innovation, and Italian Ministry of Education, University and Research, Grant number 1613 FISR2019_03221, CECOMES.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Why Does Extracellular Potassium Rise in Acute Ischemia? Insights from Computational Smilations

  • González-Ascaso, Ana
  • Olcina, Patricia
  • Garcia-Daras, Mireia
  • Rodriguez Matas, Jose F.
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
[EN] Hyperkalemia, acidosis and hypoxia are the three main components of acute myocardial ischemia. In particular, the increase of extracellular K+ concentration (hyperkalemia), has been proved to be very proarrhythmic because it sets the stage for ventricular fibrillation. However, the intimate mechanisms remain partially unknown. The aim of this work was to investigate, using computational simulation, the relationship between the different phases of hiperkalemia, the activity of the ion channels and the changes related to the action potential in the absence of coronary flow. Our results show that the partial inhibition of the sodium-potassium pump is the main cause of extracellular potassium accumulation. However, the cause of the plateau phase could be due to the appearance of action potential alternans, which reduces the net potassium efflux and limits the increase of extracellular potassium concentration., This work was partially supported by the "Programa Salvador de Madariaga 2018" of the Spanish Ministry of Science, Innovation and Universities (Grant Reference PRX18/00489).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Toward Chiral Sensing and Spectroscopy Enabled by All-Dielectric Integrated Photonic Waveguides

  • Vázquez-Lozano, J. Enrique
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Chiral spectroscopy is a powerful technique enabling to identify optically the chirality of matter. So far, most experiments to check the chirality of matter or nanostructures have been performed through arrangements wherein both the optical excitation and detection are realized via circularly polarized light propagating in free space. However, for the sake of miniaturization, it would be desirable to perform chiral spectroscopy in photonic integrated platforms, with the additional benefit of massive parallel detection, low¿cost production, repeatability, and portability. Here it is shown that all¿dielectric photonic waveguides can support chiral modes under proper combination of fundamental eigenmodes. Two mainstream configurations are investigated: a dielectric wire with square cross section and a slotted waveguide. Three different scenarios in which such waveguides could be used for chiral detection are numerically analyzed: waveguides as near¿field probes, evanescent¿induced chiral fields, and chiroptical interaction in void slots. In all the cases, a metallic nanohelix is considered as a chiral probe, though all the approaches can be extended to other kinds of chiral nanostructures as well as matter. These results establish that chiral applications such as sensing and spectroscopy could be realized in standard integrated optics, in particular, with silicon-based technology., The authors thank S. Lechago for valuable comments and technical support with the numerical simulations. This work was partially supported by funding from the European Commission Project THOR H2020-EU-829067. A.M. also acknowledges funding from Generalitat Valenciana (Grant No. PROMETEO/2019/123) and Spanish Ministry of Science, Innovation and Universities (Grant No. PRX18/00126).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid photonic-plasmonic cavities based on the nanoparticle-on-a-mirror configuration

  • Barreda, Ángela I.
  • Zapata-Herrera, Mario
  • Palstra, Isabelle M.
  • Aizpurua, Javier
  • Koenderink, A. Femius
  • Mercadé, Laura|||0000-0002-4994-7727
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Hybrid photonic-plasmonic cavities have emerged as a new platform to increase light-matter interaction capable to enhance the Purcell factor in a singular way not attainable with either photonic or plasmonic cavities separately. In the hybrid cavities proposed so far, the plasmonic element is usually a metallic bow-tie antenna, so the plasmonic gap-defined by lithography-is limited to minimum values of several nanometers. Nanoparticle-on-a-mirror (NPoM) cavities are far superior to achieve the smallest possible mode volumes, as plasmonic gaps smaller than 1 nm can be created. Here, we design a hybrid cavity that combines an NPoM plasmonic cavity and a dielectric-nanobeam photonic crystal cavity operating at transverse-magnetic polarization. The metallic nanoparticle can be placed very close (<1 nm) to the upper surface of the dielectric cavity, which acts as a low-reflectivity mirror. We demonstrate through numerical calculations of the local density of states that this hybrid plasmonic-photonic cavity exhibits quality factors Q above 10(3) and normalized mode volumes V down to 10(-3), thus resulting in high Purcell factors (F-P approximate to 10(5)), while being experimentally feasible with current technology. Our results suggest that hybrid cavities with sub-nanometer gaps should open new avenues for boosting light -matter interaction in nanophotonic systems., Horizon 2020 Framework Programme (829067 THOR); Generalitat Valenciana (PPC/2018/002, PROMETEO/2019/123); Ministerio de Ciencia, Innovacion y Universidades (PGC2018-094490-B, PRX18/00126); Alexander von Humboldt-Stiftung.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SME open innovation for process development: Understanding process-dedicated external knowledge sourcing

  • Hervás Oliver, Jose Luis|||0000-0001-6438-5497
  • Sempere-Ripoll, Francisca|||0000-0003-2658-6196
  • Estelles-Miguel, Sofia|||0000-0001-6119-373X
  • BORONAT MOLL, CARLES
[EN] Small and medium enterprise (SME) open innovation has received attention only for new product development, overlooking the fact that process innovation is a strategy commonly pursued by SMEs which requires organizing search strategies or external knowledge sourcing for that purpose. Focusing on 3,348 process-oriented innovative SMEs, defined as those that usually and primarily only introduce process rather than product innovation, this study empirically identifies key external sources of SME innovation for process technologies, linking open innovation to SME performance, and highlighting a very important distinction to literature focused on product development. The results contribute to the literature on SME open innovation., Dr. Francisca Sempere-Ripoll thanks Dr. Davide Parrilli, from the Faculty of Management at Bournemouth University (UK) and "Salvador de Madariaga Program" funded by the Spanish Ministry Science, Innovation and Universities (ref: PRX18/00244). The authors acknowledge funding from the Spanish Ministry Science, Innovation and Universities, RTI2018-095739-B-100, Prof. Dr. Hervas-Oliver as Principal Researcher.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of vulnerability to reentry in acute myocardial ischemia using a realistic human heart model

  • Carpio, Edison F.
  • Gómez, Juan F.
  • Rodríguez-Matas, José F.
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
[EN] Electrophysiological alterations of the myocardium caused by acute ischemia constitute a pro-arrhythmic substrate for the generation of potentially lethal arrhythmias. Experimental evidence has shown that the main components of acute ischemia that induce these electrophysiological alterations are hyperkalemia, hypoxia (or anoxia in complete artery occlusion), and acidosis. However, the influence of each ischemic component on the likelihood of reentry is not completely established. Moreover, the role of the His-Purkinje system (HPS) in the initiation and maintenance of arrhythmias is not completely understood. In the present work, we investigate how the three components of ischemia affect the vulnerable window (VW) for reentry using computational simulations. In addition, we analyze the role of the HPS on arrhythmogenesis. A 3D biventricular/torso human model that includes a realistic geometry of the central and border ischemic zones with one of the most electrophysiologically detailed model of ischemia to date, as well as a realistic cardiac conduction system, were used to assess the VW for reentry. Four scenarios of ischemic severity corresponding to different minutes after coronary artery occlusion were simulated. Our results suggest that ischemic severity plays an important role in the generation of reentries. Indeed, this is the first 3D simulation study to show that ventricular arrhythmias could be generated under moderate ischemic conditions, but not in mild and severe ischemia. Moreover, our results show that anoxia is the ischemic component with the most significant effect on the width of the VW. Thus, a change in the level of anoxia from moderate to severe leads to a greater increment in the VW (40 ms), in comparison with the increment of 20 ms and 35 ms produced by the individual change in the level of hyperkalemia and acidosis, respectively. Finally, the HPS was a necessary element for the generation of approximately 17% of reentries obtained. The retrograde conduction from the myocardium to HPS in the ischemic region, conduction blocks in discrete sections of the HPS, and the degree of ischemia affecting Purkinje cells, are suggested as mechanisms that favor the generation of ventricular arrhythmias., This work was supported by the Secretaría de Educacion ¿ Superior, Ciencia, Tecnología e Innovacion ¿ (SENESCYT) of Ecuador CIBAE-023- 2014, by Grant PID2019-104356RB-C41 funded by MCIN/AEI/ 10.13039/501100011033, by the European Union¿s Horizon 2020 research and innovation programme under grant agreement No 101016496, by Direccion ¿ General de Política Científica de la Generalitat Valenciana (PROMETEO 2020/043), and by the ¿Programa Salvador de Madariaga 2018¿¿ of the Spanish Ministry of Science, Innovation and Universities (Grant Reference PRX18/00489).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Inverted microbial community stratification and spatial–temporal stability in hypersaline anaerobic sediments from the S’Avall solar salterns

  • Font-Verdera, Francisca
  • Liébana, Raquel
  • Aldeguer-Riquelme, Borja
  • Gangloff, Valentin
  • Santos, Fernando
  • Viver, Tomeu
  • Rosselló Móra, Ramon
  • Gangloff, Valentin|||/items/89a3f06d-9e7d-4f44-95a7-b0c5649d3ec0
  • Santos, Fernando|||/items/dd2a3fd2-3ec8-4bc0-8604-1feb12c7300e
The anaerobic hypersaline sediments of an ephemeral pond from the S’Avall solar salterns constituted an excellent study system because of their easy accessibility, as well as the analogy of their microbial assemblages with some known deep-sea hypersaline anaerobic brines. By means of shotgun metagenomics and 16S rRNA gene amplicon sequencing, the microbial composition of the sediment was shown to be stable in time and space. The communities were formed by prokaryote representatives with a clear inferred anaerobic metabolism, mainly related to the methane, sulfur and nitrate cycles. The most conspicuous finding was the inverted nature of the vertical stratification. Contrarily to what could be expected, a methanogenic archaeal metabolism was found to dominate in the upper layers, whereas Bacteria with fermentative and anaerobic respiration metabolisms increased with depth. We could demonstrate the methanogenic nature of the members of candidate lineages DHVE2 and MSBL1, which were present in high abundance in this system, and described, for the first time, viruses infecting these lineages. Members of the putatively active aerobic genera Salinibacter and Halorubrum were detected especially in the deepest layers for which we hypothesize that either oxygen could be sporadically available, or they could perform anaerobic metabolisms. We also report a novel repertoire of virus species thriving in these sediments, which had special relevance because of their lysogenic lifestyles.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Reconstructing the Crustal Section of the Intra-Oceanic Caribbean Island Arc: Constraints From the Cumulate Layered Gabbronorites and Pyroxenites of the Rio Boba Plutonic Sequence, Northern Dominican Republic

  • Escuder-Viruete, Javier
  • Castillo-Carrión, Mercedes
  • Pérez-Valera, Fernando
  • Valverde-Vaquero, Pablo
  • Rubio-Ordóñez, Álvaro
  • Fernández, Francisco José
  • Pérez-Valera, Fernando|||/items/819ea188-fa51-4c08-9616-a5ae00727b26
Located in northern Dominican Republic, the Early Cretaceous Rio Boba mafic-ultramafic plutonic sequence constitutes a lower crust section of the Caribbean island arc, made up by gabbroic rocks and subordinate pyroxenite. Modal compositions, mineral chemistry, whole-rock compositions and thermobarometric calculations indicate that pyroxenites and gabbronorites represent a cumulate sequence formed by fractionation of tholeiitic magmas with initially very low H2O content in the lower crust of the arc (0.6–0.8 GPa). Melts evolved along a simplified crystallization sequence of olivine → pyroxenes → plagioclase → Fe-Ti oxides. The magmatic evolution of the Rio Boba sequence and associated supra-crustal Puerca Gorda metavolcanic rocks is multi-stage and involves the generation of magmas from melting of different sources in a supra-subduction zone setting. The first stage included the formation of a highly depleted substrate as result of decompressional melting of a refractory mantle source, represented by a cumulate sequence of LREE-depleted island arc tholeiitic (IAT) and boninitic gabbronorites and pyroxenites. The second stage involved volumetrically subordinate cumulate troctolites and gabbros, which are not penetratively deformed. The mantle source was refractory and enriched by a LILE-rich hydrous fluid derived from a subducting slab and/or overlying sediments, and possibly by a LREE-rich melt. The third stage is recorded in the upper crust of the arc by the Puerca Gorda “normal” IAT protoliths, which are derived from an N-MORB mantle source enriched with a strong subduction component. This magmatic evolution has implications for unraveling the processes responsible for subduction initiation and subsequent building of the Caribbean island arc.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Understanding Aesthetics and Fitness Measures inEvolutionary Art Systems

  • Johnson, Colin
  • McCormack, Jon
  • Santos, Iria
  • Romero, Juan
[Abstract] One of the general aims of evolutionary art research is to build a computer system capable of creating interesting, beautiful, orcreative results, including images, videos, animations, text, and performances. In this context, it is crucial to understand how fitnessis conceived and implemented to explore the “interestingness,” beauty, or creativity that the system is capable of. In this paper,we survey the recent research on fitness for evolutionary art related to aesthetics. We also cover research in the psychology ofaesthetics, including relation between complexity and aesthetics, measures of complexity, and complexity predictors. We try toestablish connections between human perception and understanding of aesthetics with current evolutionary techniques., Xunta de Galicia; XUGA-PGIDIT-10TIC105008-P, Xunta de Galicia; ED431C 2018/49, Tis work is supported by Xunta de Galicia (Ref. XUGAPGIDIT-10TIC105008-PR), grant for the consolidation and structuring of competitive research units of the University System of Galicia: Competitive Reference Groups (ED431C 2018/49), grant from the Ministry of Education, Culture, and Sport for mobility stays of professors and researchers in foreign higher education centers and investigation (PRX18/00117), and an Australian Research Council Future Fellowship FF170100033., Australia. Australian Research Council; FF170100033
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Genetic Programming-Based Low-Level Instructions Robot for Realtimebattle

  • Romero, Juan
  • Santos-del-Riego, Antonino
  • Carballal, Adrián
  • Rodríguez-Fernández, Nereida
  • Santos, Iria
  • Torrente-Patiño, Álvaro
  • Tuñas, Juan
  • Machado, Penousal
[Abstract]: RealTimeBattle is an environment in which robots controlled by programs fight each other. Programs control the simulated robots using low-level messages (e.g., turn radar, accelerate). Unlike other tools like Robocode, each of these robots can be developed using different programming languages. Our purpose is to generate, without human programming or other intervention, a robot that is highly competitive in RealTimeBattle. To that end, we implemented an Evolutionary Computation technique: Genetic Programming. The robot controllers created in the course of the experiments exhibit several different and effective combat strategies such as avoidance, sniping, encircling and shooting. To further improve their performance, we propose a function-set that includes short-term memory mechanisms, which allowed us to evolve a robot that is superior to all of the rivals used for its training. The robot was also tested in a bout with the winner of the previous “RealTimeBattle Championship,” which it won. Finally, our robot was tested in a multi-robot battle arena, with five simultaneous opponents, and obtained the best results among the contenders., Xunta de Galicia; GRC2014/049, This work is supported by the General Directorate of Culture, Education and University Management of Xunta de Galicia (Ref. GRC2014/049) and the European Fund for Regional Development (FEDER) allocated by the European Union, Grant from the Ministry of Education, Culture and Sport for mobility stays of professors and researchers in foreign higher education centers and investigation (PRX18/00117). We gratefully acknowledge the support of NVIDIA Corporation with the donation of the Titan Xp GPU used for this research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Virtual BUOY: A video-based approach for measuring near-shore wave peak period

  • Osorio, Andrés F.
  • Montoya-Vargas, Sebastian
  • Cartagena, Cesar A.
  • Espinosa, Jairo
  • Orfila, Alejandro
  • Winter, Christian
A new approach to estimate the peak period using time stack images from a video monitoring system is presented. The method is an improvement of the one developed by Stockdon and Holman (Stockdon, H.F., Holman, R.A., 2000. Estimation of wave phase speed and nearshore bathymetry from video imagery. J. Geophys. Res. Ocean. 105, 22015–22033), (S&H) including thresholding of the image to automatically identify free foam zone in the image, improved filtering procedure and windowing of the pixel intensity series in order to avoid noisy signals and spectral leakage. Results are tested against measurements in four beaches showing an absolute error below 2 s for 75% of the analyzed images despite the variable light conditions and noisy signals. Comparison with the S&H method is given showing that the new method reduces relative error on average by 28%. These results are achieved without taking into account the camera configuration requiring only the identification of a representative amount of land pixels in order to adequately eliminate noisy signals produced by environmental light fluctuations., Authors acknowledge financial support from Convocatoria Nacional de proyectos para el fortalecimiento de la investigación, creación e innovación de la Universidad Nacional de Colombia through project “Analysis of the hydrodynamic and morphodynamic characteristics of a sandy beach by means of numerical modeling and image processing” and “Estrategia de transformación del sector energético Colombiano en el horizonte de 2030″ supported by Colciencias Ecosistema Científico Contract FP44842-210-2018, as well as from the Spanish MINECO/FEDER through project MUSA(CTM-2015-66225-C2-2-P). The authors also wish to express thanks to the OCEANICOS, MARUM, IMEDEA and SOCIB research groups for the data used in this work. Data from the HZG COSYNA “Bunkerhill” wave buoy was obtained from the open COSYNA data portal. This work was partially performed while A. Orfila was a visiting scientist at the Earth, Environmental and Planetary Science Department at Brown University through a Ministerio de Ciencia, Innovacion y Universidades fellowship (PRX18/00218)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coastal impacts driven by sea-level rise in Cartagena de Indias

  • Orejarena-Rondón, Andrés F.
  • Sayol, Juan Manuel
  • Marcos, Marta
  • Otero, Luis
  • Restrepo, Juan C.
  • Hernández Carrasco, Ismael
  • Orfila, Alejandro
This work analyzes the coastal impacts of the combined effect of extreme waves and sea level extremes, including surges and projected mean sea level rise in Bocagrande, Cartagena (Colombia). Extreme waves are assessed from a wave reanalysis that are propagated from deep waters to the beach considering the hydrodynamic processes and taking into account the interaction between waves and the coastal elevation within the study area. First, we consider present sea level, storm surges and waves affecting the area. Next, we analyze the effect of sea level rise according to a moderate (RCP4.5) climate change scenario for the 21st century (years 2025, 2050, 2075, and 2100). The most pessimistic scenario (year 2100) yields a percentage of flooded area of 97.2%, thus revealing the major threat that represents sea level rise for coastal areas in the Caribbean Sea., This work was supported by COLCIENCIAS (Departamento Administrativo de Ciencia, Tecnología e Innovación) through of convocatoria 727 and from the Spanish Government MICINN/FEDER through projects MUSA (CTM2015-66225-C2-2-P) and MOCCA (RTI2018-093941-B-C31). The authors acknowledge the financial support from the Spanish Government MICINN/FEDER through projects MUSA (CTM2015-66225-C2-2-P) and MOCCA (RTI2018-093941-B-C31). AO-R is supported by a grant from Colombian COLCIENCIAS (Convocatoria 727). JS thanks the financial support by the Netherlands Scientific Research Foundation (NWO) through the VIDI grant number 864.13.011 awarded to C. A. Katsman. IH-C acknowledges the Vicenç Mut contract funded by the Government of the Balearic Island. This work was partially performed while AO was a visiting scientist at the Earth, Environmental and Planetary Sciences Department at Brown University through a Ministerio de Ciencia, Innovación y Universidades fellowship (PRX18/00218).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

“Candidatus Macondimonas diazotrophica”, a novel gammaproteobacterial genus dominating crude-oil-contaminated coastal sediments

  • Karthikeyan, Smruthi
  • Rodriguez-R, Luis M.
  • Heritier-Robbins, Patrick
  • Kim, Minjae
  • Overholt, Will A.
  • Gaby, John C.
  • Hatt, Janet K.
  • Spain, Jim C.
  • Rosselló-Mora, Ramón
  • Huettel, Markus
  • Kostka, Joel E.
  • Konstantinidis, Konstantinos T.
Modeling crude-oil biodegradation in sediments remains a challenge due in part to the lack of appropriate model organisms. Here we report the metagenome-guided isolation of a novel organism that represents a phylogenetically narrow (>97% 16S rRNA gene identity) group of previously uncharacterized, crude-oil degraders. Analysis of available sequence data showed that these organisms are highly abundant in oiled sediments of coastal marine ecosystems across the world, often comprising ~30% of the total community, and virtually absent in pristine sediments or seawater. The isolate genome encodes functional nitrogen fixation and hydrocarbon degradation genes together with putative genes for biosurfactant production that apparently facilitate growth in the typically nitrogen-limited, oiled environment. Comparisons to available genomes revealed that this isolate represents a novel genus within the Gammaproteobacteria, for which we propose the provisional name “Candidatus Macondimonas diazotrophica” gen. nov., sp. nov. “Ca. M. diazotrophica” appears to play a key ecological role in the response to oil spills around the globe and could be a promising model organism for studying ecophysiological responses to oil spills., This research was made possible by a grant from The Gulf of Mexico Research Initiative (Grant No 321611-00; RFP V). Data are publicly available through the Gulf of Mexico Research Initiative Information & Data Cooperative (GRIIDC) at https://data.gulfresearchinitiative.org (UDI: R5.x278.000:0014, UDI: R5.x278.000:0002). RR-M acknowledges the financial support for his sabbatical stay at Georgia Tech from the Spanish Ministry of Sciences, Innovation and Universities (Grant No. PRX18/00048).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glycerol selective oxidation to lactic acid over AuPt nanoparticles; Enhancing reaction selectivity and understanding by support modification

  • Douthwaite, Mark
  • Powell, Natasha
  • Taylor, Aoife
  • Ford, Grayson
  • López Sebastián, José Manuel
  • Solsona, Benjamín
  • Yang, Nating
  • Sanahuja-Parejo, Olga
  • He, Quian
  • Morgan, David J.
  • García Martínez, Tomás
  • Taylor, Stuart H.
2 Schemes, 3 Tables, 5 Figures., A high surface area mesoporous TiO2 material (110 m2/g) was synthesised using a nanocasting methodology, utilizing SBA‐15 as a hard template. This material was subsequently used as a support to prepare a series of 1 wt.% AuPt/TiO2 catalysts, synthesised by conventional impregnation and sol‐immobilisation. Catalysts were tested for the oxidation of glycerol to lactic acid and their performance was compared with corresponding catalysts supported on TiO2−P25, TiO2‐anatase and TiO2‐rutile. Higher rates of reaction and higher selectivity to lactic acid were observed over nanocast TiO2 supported catalysts. The increased performance of these catalysts was attributed to the presence of Si on the surface of the support, which likely arose from inefficient etching of the SBA‐15 template. The presence of Si in these catalysts was confirmed by X‐ray photoelectron spectroscopy and electron energy loss spectroscopy. It was proposed that the residual Si present increases the Brønsted acidity of the TiO2 support, which can lead to the formation of Lewis acid sites under reaction conditions; both sites are known to catalyse the dehydration of a primary alcohol in glycerol. Typically, under alkaline conditions, lactic acid is formed by the nucleophilic abstraction of a hydrogen. Thus, we propose that the improved selectivity to lactic acid over the nanocast TiO2 supported catalyst is attributed to the co‐operation of heterogeneous and homogeneous dehydration reactions, as both compete directly with a direct oxidation pathway, which leads to the formation of oxidation products such as glyceric and tartronic acid., T. García would like to acknowledge the Spanish MICINN through its Mobility program for stays of senior researchers and professors in foreign countries (grant number PRX18/00474) for funding. O.S.P acknowledges the FPI fellowship (BES-2016-077750) funded by Spanish MINECO. B.S. also thank MINECO (MAT2017-84118-C2-1-R project) for funding. We would also like to thank the Cardiff University TEM facility for the TEM and FEG-SEM electron microscopy data acquired and Diamond Light Source for access and support in use of the electron Physical Science Imaging Centre (Instrument E01 and proposal number MG21641 and MG22766) which contributed to the results presented here., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microbial Motility at the Bottom of North America: Digital Holographic Microscopy and Genomic Motility Signatures in Badwater Spring, Death Valley National Park

  • Snyder, Carl
  • Centlivre, Jakob P.
  • Bhute, Shrikant
  • Shipman, Gözde
  • Friel, Ariel D.
  • Viver, Tomeu
  • Palmer, Marike
  • Konstantinidis, Konstantinos T.
  • Sun, Henry J.
  • Rosselló-Mora, Ramón
  • Nadeau, Jay
  • Hedlund, Brian P.
Motility is widely distributed across the tree of life and can be recognized by microscopy regardless of phylogenetic affiliation, biochemical composition, or mechanism. Microscopy has thus been proposed as a potential tool for detection of biosignatures for extraterrestrial life; however, traditional light microscopy is poorly suited for this purpose, as it requires sample preparation, involves fragile moving parts, and has a limited volume of view. In this study, we deployed a field-portable digital holographic microscope (DHM) to explore microbial motility in Badwater Spring, a saline spring in Death Valley National Park, and complemented DHM imaging with 16S rRNA gene amplicon sequencing and shotgun metagenomics. The DHM identified diverse morphologies and distinguished run-reverse-flick and run-reverse types of flagellar motility. PICRUSt2- and literature-based predictions based on 16S rRNA gene amplicons were used to predict motility genotypes/phenotypes for 36.0-60.1% of identified taxa, with the predicted motile taxa being dominated by members of Burkholderiaceae and Spirochaetota. A shotgun metagenome confirmed the abundance of genes encoding flagellar motility, and a Ralstonia metagenome-assembled genome encoded a full flagellar gene cluster. This study demonstrates the potential of DHM for planetary life detection, presents the first microbial census of Badwater Spring and brine pool, and confirms the abundance of mobile microbial taxa in an extreme environment., R.R.-M. research was supported by the Spanish Ministry of Science, Innovation and Universities projects PGC2018-096956-B-C41 and PRX18/00048, both also supported with European Regional Development Fund (FEDER) funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integration of landslide hazard into urban planning across Europe

  • Mateos Ruiz, Rosa María
  • López-Vinielles, Juan
  • Poyiadji, Eleftheria
  • Tsagkas, Dimetrios
  • Sheehy, Michael
  • Hadjicharalambous, Kleopas
  • Liščák, Pavel
  • Podolski, Laszlo
  • Laskowicz, Izabela
  • Iadanza, Carla
  • Gauert, Christoph
  • Todorović, Saša
  • Auflič, Mateja Jemec
  • Maftei, Raluca
  • Hermanns, Reginald L.
  • Kociu, Arben
  • Sandić, Cvjetko
  • Mauter, Rike
  • Sarro Trigueros, Roberto
  • Béjar Pizarro, Marta
  • Herrera García, Gerardo
[EN] An enquiry-based and participatory analysis approach is carried out to identify the strengths and weaknesses in the heterogeneous legislations across Europe that regulate the integration of landslide hazard into urban planning. Twenty one national and eight regional Geological Surveys (GSs) have participated in the analysis. The GSs report almost 4000 recent (2015–2017) damaging landslides events resulting in 39 fatalities and 155 injuries, destruction to housing, infrastructure and properties. In addition, 11 countries report 18 MORLE events over the past 10 years responsible for 150 fatalities and severe economic impacts. Results also reveal almost 48 million people living in areas with high and very high degrees of landslide-susceptibility (around 1 million km2 according to ELSUS v2). This work shows that almost half the participating countries (10 countries) have no legal guidance in the National Land Bill to stipulate consideration of landslides in urban planning practices, and mapping tools are often not adapted to a standard required to inform sustainable development. Furthermore, there is a wide range of laws and a large heterogeneity of mapping methods, scales and procedures. A relevant deficiency detected in many countries is the lack of landslide maps at a detailed resolution for urban planning. Additionally, some case studies of suboptimal urban development practices in areas of known instability have been discussed; they are found to be related to weak rule of law and/or absence of good governance. This paper shows inconsistencies across Europe in the handling of landslides and proposes a series of key actions to improve this situation, highlighting the need for a common regulatory framework to deal with this geohazard appropriately., This survey has been developed within the framework of the Earth Observation and Geohazard Expert Group (EOEG) from EuroGeoSurveys and was funded by the European Commission, Directorate-General Humanitarian Aid and Civil Protection (ECHO), through the project U-Geohaz: Geohazard Impact Assessment for Urban Areas. Grant Agreement No. 783169. This work has been partly funded by Salvador de Madariaga Mobility Program from the Spanish Ministry of Science, projects: PRX18/00020 and PRX19/00065., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probabilistic identification of rockfall source areas at regional scale in El Hierro (Canary Islands, Spain)

  • Rossi, Mauro
  • Sarro Trigueros, Roberto
  • Reichenbach, Paola
  • Mateos Ruiz, Rosa María
[EN] Modelling rockfall phenomena is complex and requires various inputs, including an accurate location of the source areas. Source areas are controlled by geomorphological, geological, or other geo-environmental factors and may largely influence the results of the modelling. In the Canary Islands, rockfalls are extremely common and pose a major threat to society, costing lives, disrupting infrastructure, and destroying livelihoods. In 2011, the volcanic event on the island of El Hierro triggered numerous rockfalls that affected strategic infrastructures, with a substantial impact on the local population. During the emergency, the efforts performed to map the source areas and to model the rockfalls in the considerably steep landscape characterising the island were not trivial. To better identify the rockfall source areas, we propose a probabilistic modelling framework that applies a combination of multiple statistical models using the source area locations mapped in the field as the dependent variable and a set of thematic data as independent variables. The models use as input morphometric parameters derived from the Digital Elevation Model and lithological data as an expression of the mechanical behaviour of the rocks. The analysis of different training and validation scenarios allowed us to test the model sensitivity to the input data, select the optimal model training configuration, and evaluate the model applicability outside the training areas. The final map obtained from the model for the entire island of El Hierro provides the probability of a given location being a potential source area and can be used as the input for rockfall runout simulation modelling., This work was funded by i) the European Commission, Directorate-General Humanitarian Aid and Civil Protection (ECHO), through the project U-GEOHAZ (Geohazard Impact Assessment for Urban Areas), Grant Agreement No. 783169, and ii) the Salvador de Madariaga Mobility Program from the Spanish Ministry of Science, Project: 384 PRX18/00020. It was also partially supported by the University of Alicante in the framework of the Quality Improvement Grant of the PhD Program in Materials, Structures, and Soil Engineering: Sustainable Construction, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geotechnics for rockfall assessment in the volcanic island of Gran Canaria (Canary Islands, Spain)

  • Sarro Trigueros, Roberto
  • Mateos Ruiz, Rosa María
  • Reichenbach, Paola
  • Aguilera Alonso, Héctor
  • Riquelme, Adrián
  • Hernández Gutiérrez, Luis Enrique
  • Jiménez Martín, Alejandro
  • Barra, Anna
  • Solari, Lorenzo
  • Monserrat, Oriol
  • Alvioli, Massimiliano
  • Fernández Merodo, José Antonio
  • López-Vinielles, Juan
  • Herrera García, Gerardo
[EN] The island of Gran Canaria (Canary Islands, Spain) is characterized by a large variability of volcanic rocks reflecting its volcanic evolution. The geological map provided by Geological Survey of Spain at 1:25.000 scale shows more than 109 different lithologies and it is too complex for environmental and engineering purposes. This work presents a simplified geotechnical map with a small number of classes grouping up units with similar geotechnical behaviours. The lithologies were grouped using about 350 rock samples, collected in the seven major islands of the Archipelago. The geotechnical map was used to model rockfall hazard in the entire island of Gran Canaria, where rockfalls are an important threat. The rockfall map was validated with 128 rockfall events along the GC-200 road, located in the NW sector of Gran Canaria. About 96% of the events occurred along sections of the road where the number of expected trajectories is high or moderate., This work was carried out in the framework of two projects funded by the European Commission, Directorate-General Humanitarian Aid and Civil Protection (ECHO): SAFETY (Sentinel-1 for geohazard prevention and forecasting. Ref. ECHO/SUB/2015/718679/Prev02) and U-GEOHAZ (Geohazard Impact Assessment for Urban Areas. Grant Agreement No. 783169). This work has been partly funded by the University of Alicante in the framework of Quality Improvement Grant of PhD Program in Materials, Structures and Soil Engineering: Sustainable Construction, Salvador de Madariaga Mobility Program from the Spanish Ministry of Science (PRX18/00020) and the Industrial PhD Project GEODRON (IND2017/AMB-7789). We also appreciate the contribution of the MACASTAB project (Ref.: MAC/3.5b/027). The laboratory tests were carried out in the Laboratories of Building and Public Works from the Canarian Government. The methodology is also developed in the framework of the RISKCOAST project (Ref: SOE3/P4/E0868) funded by the European Regional Development Fund - Interreg programme (3rd call for proposals)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Laser Interactions with Organic/Polymer Materials

  • Rebollar, Esther
  • Castillejo, Marta
Laser light irradiation of organic or polymeric materials leads to a wide range of controlled physical and chemical modifications in the micro-and nanoscales. Laser pulses, with wavelengths from the ultraviolet to the infrared, with duration in nanosecond, picosecond, and femtosecond temporal domains, may remove material from the surface by ablation, induce swelling of the irradiated region, or generate patterns of different sizes and geometries, using methods which involve multiple laser beams or nanoparticle-mediated effects. Laser-induced chemical modifications of organic or polymeric substrates are at the basis of very important and technologically relevant processes such as laser lithography, fabrication of nanocomposites, or 3D photopolymerization. Laser irradiation also serves for transferring organic and polymeric materials from bulk to thin films, and different advanced techniques have been applied, or specifically developed, for polymeric soft, light-sensitive materials, as is the case of pulsed laser deposition, laser-induced forward transfer, or matrix-assisted methods. This chapter introduces the most important laser irradiation and laser transfer techniques that are nowadays applied to organic and polymeric materials, describes some of the attempts to interpret and model the main underlying mechanisms, and reviews relevant applications of the laser-modified substrates., Thanks are given to Spanish Ministry of Science, Innovation and Universities (MCIU) for funding under the project CTQ2016-75880-P. E.R. also thanks the tenure of a Ramón y Cajal contract (No. RYC-2011-08069). M.C. acknowledges support from Project PRX18/00029 (MCIU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metagenomics reveal unrestricted dispersal of extreme halophiles and higher connectivity among coastal vs. inland solar salterns and hypersaline lakes

  • Viver, Tomeu
  • Gago, Juan F.
  • Bustos, Esteban
  • Aldeguer-Riquelme, Borja
  • Rodriguez Rojas, Luis Miguel
  • Ramírez, Ana Sofía
  • Albuquerque, Luciana
  • Amiour, Souad
  • Oren, Aharon
  • Mutlu, Mehmet Burcin
  • Venter, Stephanus N.
  • Baxter, Bonnie K.
  • Llames, María E.
  • González, Bernardo
  • Rodríguez-Valdecantos, Gustavo
  • Banciu, Horia L.
  • Stott, Matthew B.
  • Santos, Fernando
  • Hedlund, Brian P.
  • Antón, Josefa
  • Amann, Rudolf
  • Konstantinidis, Konstantinos T.
  • Rosselló-Mora, Ramón
Hypersaline environments constitute ideal systems for studying evolutionary processes and microbial diversification due to their relatively low (and thus tractable) diversity and geographically isolated nature. Based on metagenomic sequencing of samples from 25 hypersaline sites in 11 countries taken within a single year, we explored the relationships between environmental factors, geographic distance, and microbial community structure and diversification. Our results revealed that microbial communities of coastal sites were more similar to each other than those of the inland sites, reflecting higher connectivity due to ocean currents and nearly unrestricted dispersal. Conversely, inland hypersaline environments showed less connectivity and higher genetic and taxonomic dissimilarities that did not correlate with the distance between the sampled sites. The latter results reflect reduced species migration characterizing inland sites as well as site-specific environmental factors selecting for divergent taxa. The 484 MAGs recovered, representing 284 distinct species, revealed a striking global ubiquity, with 62.5% of the species showing cosmopolitanism, defined as being present at both coastal and inland sites. Most cosmopolitan species showed allopatric differentiation, reflected by an increased frequency of non-synonymous substitutions between MAGs of the same species recovered from more distant sites. However, a few cases of truly cosmopolitan genomovars (average nucleotide identity, or ANI > 99.8%), were also observed. Our results suggest that extreme halophiles have nearly unrestricted global dispersal among ocean-connected sites, and to a lesser extent, among geographically isolated inland sites, although cases of allopatric diversification were also observed., This work was funded by the Spanish Ministry of Science, Innovation and Universities (PGC2018-096956-B-C41, RTC-2017-6405-1, PID2021-126114NB-C42, PID2024-158829NB-C42, PRX18/00048 and PRX21/00043 to R.R.M.; PID2021-126114NB-C41 and PID2024-158829NB-C41 to J.A.B. and F.S.), with support from the European Regional Development Fund (FEDER). Further funding was supplied by the Max Planck Society. IMEDEA research was supported by the “Maria de Maeztu Centre of Excellence” (CEX2021-001198). K.T.K. acknowledges support from the U.S. National Science Foundation (1831582, 2129823), and B.P.H. from award 2038420. H.L.B. was supported by CNCS–UEFISCDI (PN-III-P4-ID-PCE-2020-1559, PCE 64/2021). TV acknowledges the “Margarita Salas” and “Vicenç Mut” postdoctoral grants, funded by the Spanish Ministry of Universities and Ministry of Education and Universities of the Government of the Balearic Islands., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

"Test two, choose the better" leads to high cooperation in the Centipede game

  • Izquierdo, Segismundo S.
  • Izquierdo Millán, Luis Rodrigo
Explaining cooperative experimental evidence in the Centipede game constitutes a challenge for rational game theory. Traditional analyses of Centipede based on backward induction predict uncooperative behavior. Furthermore, analyses based on learning or adaptation under the assumption that those strategies that are more successful in a population tend to spread at a higher rate usually make the same prediction. In this paper we consider an adaptation model in which agents in a finite population do adopt those strategies that turn out to be most successful, according to their own experience. However, this behavior leads to an equilibrium with high levels of cooperation and whose qualitative features are consistent with experimental evidence., Financial support from the Spanish State Research Agency (PID2020-118906GB-I00 / AEI / 10.13039/501100011033), from “Junta de Castilla y León - Consejería de Educación” through BDNS 425389, from the Spanish Ministry of Science, Innovation and Universities (PRX18-00182, PRX19/00113), and from the Fulbright Program (PRX19/00113), is gratefully acknowledged.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Análisis del golpeo de fondo en jóvenes jugadores de tenis en una competición modificada mediante sensores inteligentes

  • Giménez-Egido, José María
  • Fernández García, Ángel Iván
  • Castellanos Álvaro
La utilización de dispositivos inteligentes para observar el efecto de la modificación de reglas y equipamientos deportivos sobre las conducta técnico-táctica en etapas de formación, abre un nuevo campo de estudio en la mejora de los procesos de enseñanza-aprendizaje. El objetivo de estudio es utilizar el sensor inteligente “Zepp Tennis 2.2.1”, para conocer el impacto de una competición modificada (altura de la red= 0,80m y dimensiones del campo= 18,00x8,23m) en jugadores de tenis sub-10, atendiendo a los criterios de optimización de las enseñanzas comprensivas. La unidad de análisis fueron los golpeos ejecutados (n=7758) en 40 partidos por 20 jugadores (edad media= 9.46±0.66 años). Las variables de estudio son: a) número de golpeos; b) porcentaje de golpes que impactan en el punto dulce de la raqueta; c) velocidad de bola; y d) revoluciones por minuto de la pelota. Los resultados más destacables son: a) un aumento del uso de golpeos planos sobre los de efecto liftado y cortado; y b) escasa aparición en juego del revés plano y cortado, aunque muestren mejores valores de velocidad lineal y rotacional que los golpeos de derecha. La reducción de la altura de la red y las dimensiones del campo inducen a los jóvenes jugadores a una conducta ofensiva de juego. Este comportamiento ofensivo, coincide con las recomendaciones que promueven las enseñanzas comprensivas sobre un proceso de enseñanza-aprendizaje óptimo.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Extracellular matrix density regulates the formation of tumour spheroids through cell migration

  • Goncalves, IG
  • Garcia-Aznar, JM
Author summary Multicellular organisms are composed of cells found in a scaffold known as the extracellular matrix, which interacts with cells. There is still a need to understand how the properties of this matrix, namely, its mechanical properties, regulate the organization of cellular systems. However, recent works have proven the relevance of the matrix, with a particular emphasis in tumour biology studies. Furthermore, to accelerate and reduce the costs of these studies, several computational frameworks have been presented to simulate the collective behaviour of the matrix. Hence, in this work, we introduce a model based on experimental data, which highlights the role of the mechanical properties of the matrix in individual and collective cell migration. We clearly show how the extracellular matrix induces the formation of large tumour clusters. Moreover, the model that we present accurately describes general trends of the experimental results used for model calibration; the model also has the potential to be extended to study matrices with different properties and different cell lines. In this work, we show how the mechanical properties of the cellular microenvironment modulate the growth of tumour spheroids. Based on the composition of the extracellular matrix, its stiffness and architecture can significantly vary, subsequently influencing cell movement and tumour growth. However, it is still unclear exactly how both of these processes are regulated by the matrix composition. Here, we present a centre-based computational model that describes how collagen density, which modulates the steric hindrance properties of the matrix, governs individual cell migration and, consequently, leads to the formation of multicellular clusters of varying size. The model was calibrated using previously published experimental data, replicating a set of experiments in which cells were seeded in collagen matrices of different collagen densities, hence producing distinct mechanical properties. At an initial stage, we tracked individual cell trajectories and speeds. Subsequently, the formation of multicellular clusters was also analysed by quantifying their size. Overall, the results showed that our model could accurately replicate what was previously seen experimentally. Specifically, we showed that cells seeded in matrices with low collagen density tended to migrate more. Accordingly, cells strayed away from their original cluster and thus promoted the formation of small structures. In contrast, we also showed that high collagen densities hindered cell migration and produced multicellular clusters with increased volume. In conclusion, this model not only establishes a relation between matrix density and individual cell migration but also showcases how migration, or its inhibition, modulates tumour growth.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimisation of off-grid hybrid renewable systems with thermoelectric generator

  • Dufo López, Rodolfo
  • Champier, Daniel
  • Gibout, Stephan
  • Lujano-Rojas, Juan M.
  • Domínguez-Navarro, José A.
This paper shows, for the rst time, the optimisation of the electrical supply in o -grid systems by means of hybrid renewable systems (photovoltaic + wind + battery + fossil fuel) including thermoelectric generator (which source of heat is the exhaust gas of a stove used for cooking or heating). The objective is to minimise the net present cost. An advanced battery model and the accurate calculation of the net present cost (including all the costs during the system lifetime) are considered in the optimisation of this kind of systems. The standard simpli ed model of the thermoelectric generator is used, as more complex models cannot be used in an optimisation framework, where hundreds or thousands of di erent cases must be simulated (each combination of components must be simulated at least during one year, in 1-min steps). The optimization is carried out e ciently by means of genetic algorithms. The method has been applied in the optimisation of two cases of low consumption o -grid households (Cambodia and Norway). Thermoelectric generator (costing €8/W) is part of the optimal solution in the case of Norway. In Cambodia, to be part of the optimal system, acquisition cost of the thermoelectric generator should be reduced by 25%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Visible light plays a significant role during bacterial inactivation by the photo-fenton process, even at sub-critical light intensities

  • Mosteo, Rosa
  • Varon Lopez, A.
  • Muzard, D.
  • Benitez, N.
  • Giannakis, S.
  • Pulgarin, C.
The aim of this research is to clarify the contribution of sunlight wavelengths, irradiance and Fe2+/H2O2 during bacterial disinfection by the photo-Fenton process in clear surface waters. We considered different solar spectrum distributions (visible, UVA-Visible), sub-critical irradiances (0–400 W/m2), focusing on the action modes of E. coli inactivation by the constituents involved in the composite process, at low µM reactants concentration (Fe2+/H2O2) in in ultrapure (MQ) water. We report that solar disinfection improved with Fenton reagents (photo-Fenton process) is a reality from very low light irradiance values (200 W/m2), and made possible even without the presence of UVA radiation, even when using low quantities of the Fenton reagents (0.5 mg/L Fe2+, 5 mg/L H2O2). Under light exposure, H2O2 was found to augment the intracellular Fenton process and Fe2+ to initiate further, distinct oxidative actions. Finally, validation was performed in Lake Geneva water over a wider irradiance range, where the photo-Fenton process was found to be reagent-dependent in low irradiance, shifting to light-driven in the higher values.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

BASECASS: A methodology for CAPTCHAs security assurance

  • Hernández Castro, Carlos Javier
  • Fernández Barrero, David|||0000-0002-3601-3052
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
Today, much of the interaction between clients and providers has moved to the Internet. Some tricksters havealso learned to benefit from this new situation. New improved cons, tricks and deceptions can be found on-line.Many of these deceptions are only profitable if they are done at a large scale. In order to achieve these largenumbers of interactions, these attacks require automation.CAPTCHAs/HIPs are a relatively new security mechanism against automated attacks. They try to detectwhen the other end of the interaction is a human or a computer program (abot). However, CAPTCHA/HIPdesign is still in its initial conception as the stream of successful attacks highlight it.This paper focuses on the design of CAPTCHAs and if there is a way in which to assess a basic level ofsecurity for new CAPTCHA designs. To do so, we first review main attacks to different types of CAPTCHAsand then, we describe BASECASS, a methodology that can help in avoiding some of these design pitfalls.The application of the methodology is exemplified in three attacks to CAPTCHAs and how following themethodology designers could have avoided them., Junta de Comunidades de Castilla-La Mancha, Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación