Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

NanoSQUID Magnetometry on Individual As-grown and Annealed Co Nanowires at Variable Temperature

  • Martínez-Pérez, M.J.
  • Pablo-Navarro, J.
  • Müller, B.
  • Kleiner, R.
  • Magén, C.
  • Koelle, D.
  • De Teresa, J.M.
  • Sesé, J.
Performing magnetization studies on individual nanoparticles is a highly demanding task, especially when measurements need to be carried out under large sweeping magnetic fields or variable temperature. Yet, characterization under varying ambient conditions is paramount in order to fully understand the magnetic behavior of these objects, e.g., the formation of nonuniform states or the mechanisms leading to magnetization reversal and thermal stability. This, in turn, is necessary for the integration of magnetic nanoparticles and nanowires into useful devices, e.g., spin-valves, racetrack memories, or magnetic tip probes. Here, we show that nanosuperconducting quantum interference devices based on high critical temperature superconductors are particularly well suited for this task. We have successfully characterized a number of individual Co nanowires grown through focused electron beam induced deposition and subsequently annealed at different temperatures. Magnetization measurements performed under sweeping magnetic fields (up to 100 mT) and variable temperature (1.4-80 K) underscore the intrinsic structural and chemical differences between these nanowires. These point to significant changes in the crystalline structure and the resulting effective magnetic anisotropy of the nanowires, and to the nucleation and subsequent vanishing of antiferromagnetic species within the nanowires annealed at different temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

3D superconducting hollow nanowires with tailored diameters grown by focused He+ beam direct writing

  • Cordoba, R.
  • Ibarra, A.
  • Mailly, D.
  • Guillamon, I.
  • Suderow, H.
  • De Teresa, J.M.
Currently, the patterning of innovative three-dimensional (3D) nano-objects is required for the development of future advanced electronic components. Helium ion microscopy in combination with a precursor gas can be used for direct writing of three-dimensional nanostructures with a precise control of their geometry, and a significantly higher aspect ratio than other additive manufacturing technologies. We report here on the deposition of 3D hollow tungsten carbide nanowires with tailored diameters by tuning two key growth parameters, namely current and dose of the ion beam. Our results show the control of geometry in 3D hollow nanowires, with outer and inner diameters ranging from 36 to 142 nm and from 5 to 28 nm, respectively; and lengths from 0.5 to 8.9 mu m. Transmission electron microscopy experiments indicate that the nanowires have a microstructure of large grains with a crystalline structure compatible with the face-centered cubic WC1-x phase. In addition, 3D electron tomographic reconstructions show that the hollow center of the nanowires is present along the whole nanowire length. Moreover, these nanowires become superconducting at 6.8 K and show high values of critical magnetic field and critical current density. Consequently, these 3D nano-objects could be implemented as components in the next generation of electronics, such as nano-antennas and sensors, based on 3D superconducting architectures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Transport and Noise Properties of sub-100-nm Planar Nb Josephson Junctions with Metallic Hf-Ti Barriers for nano-SQUID Applications

  • Morosh, V.
  • Linek, J.
  • Muller, B.
  • Martinez-Perez, M.J.
  • Wolter, S.
  • Weimann, T.
  • Beyer, J.
  • Schurig, T.
  • Kieler, O.
  • Zorin, A.B.
  • Kleiner, R.
  • Koelle, D.
We analyze electric transport and noise properties at 4.2 K of self-shunted superconductor-normal metal-superconductor (SNS) sandwich-type Josephson junctions, comprising Nb as the superconductor and Hf-Ti as the normal conducting material, with lateral dimensions down to approximately 80 nm. The junctions are fabricated with an optimized multilayer Nb technology based on nanopatterning by electron-beam lithography and chemical-mechanical polishing. The dependence of transport properties on the junction geometry (lateral size and barrier thickness d(Hf-Ti)) is studied, yielding a characteristic voltage V-c up to approximately 100 mu V for the smallest d(Hf-Ti) = 17 nm. The observed small hysteresis in the current-voltage curves of devices with high V-c and large size can be attributed to self-heating of the junctions and fitted with an extended version of the resistively shunted junction model. Measurements of voltage noise of single junctions are consistent with the model including self-heating effects. The potential of our technology for further miniaturization of nanoscale superconducting quantum interference devices and for the improvement of their performance is discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Disordered hyperuniformity in superconducting vortex lattices

  • Llorens, J.B.
  • Guillamon, I.
  • García Serrano, I.
  • Cordoba, R.
  • Sese, J.
  • De Teresa, J.M.
  • Ibarra, M.R.
  • Vieira, S.
  • Ortuno, M.
  • Suderow, H.
The current carrying capability of type II superconductors under magnetic fields is determined to a large extent by the interaction of superconducting vortices with pinning centers. Vortices are arranged in lattices with varying degrees of disorder depending on the balance between the intervortex interactions and the pinning strength. We analyze here vortex arrangements in disordered vortex lattices of different superconducting systems, single crystals (Co-doped NbSe2, LiFeAs, and CaKFe4As4), and amorphous W- based thin films (with critical temperatures T-c from 4 K to 35 K and critical fields from 3.4 T to more than 90 T). We calculate for each case the structure factor and number variance and compare to calculations on an interacting set of partially pinned particles. We find that random density fluctuations appear when pinning overcomes interactions and show that the suppression of density fluctuations is correlated to the presence of interactions. We discuss the results within the framework of hyperuniform distributions and find that all studied lattices follow a similar increase of the number variance with the defect density.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

YBa2Cu3O7 and Nb NanoSQUIDs for the Investigation of Magnetization Reversal of Individual Magnetic Nanoparticles

  • Müller, B.
  • Lin, J.
  • Linek, J.
  • Karrer, M.
  • Limberger, F.
  • Koch, L.
  • Goldobin, E.
  • Kleiner, R.
  • Koelle, D.
  • Morosh, V.
  • Weimann, T.
  • Kieler, O.F.
  • Sesé, J.
  • Martínez-Pérez, M.J.
We report on the fabrication, performance and application of sensitive YBa2Cu3O7 (YBCO) and Nb nanoSQUIDs to magnetization reversal measurements of individual magnetic nanoparticles. The YBCO SQUIDs are based on grain boundary Josephson junctions and are patterned in a single layer of epitaxially grown YBCO films by Ga focused ion beam milling. The Nb SQUIDs contain sandwich-type Josephson junctions with normal conducting HfTi barriers; they are fabricated with a multilayer technology that includes patterning by e-beam lithography and a combination of milling techniques and chemical-mechanical polishing. Due to the small inductance of the SQUID loops, ultralow white flux noise at 4.2 K can be achieved, which yields spin sensitivities of down to a few Bohr magnetons per unit bandwidth for a magnetic nanoparticle placed at 10 nm distance to the SQUID loop.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Critical current modulation induced by an electric field in superconducting tungsten-carbon nanowires

  • Orus, P
  • Fomin, VM
  • De Teresa, JM
  • Cordoba, R
The critical current of a superconducting nanostructure can be suppressed by applying an electric field in its vicinity. This phenomenon is investigated throughout the fabrication and electrical characterization of superconducting tungsten-carbon (W-C) nanostructures grown by Ga+ focused ion beam induced deposition (FIBID). In a 45 nm-wide, 2.7 mu m-long W-C nanowire, an increasing side-gate voltage is found to progressively reduce the critical current of the device, down to a full suppression of the superconducting state below its critical temperature. This modulation is accounted for by the squeezing of the superconducting current by the electric field within a theoretical model based on the Ginzburg-Landau theory, in agreement with experimental data. Compared to electron beam lithography or sputtering, the single-step FIBID approach provides with enhanced patterning flexibility and yields nanodevices with figures of merit comparable to those retrieved in other superconducting materials, including Ti, Nb, and Al. Exhibiting a higher critical temperature than most of other superconductors, in which this phenomenon has been observed, as well as a reduced critical value of the gate voltage required to fully suppress superconductivity, W-C deposits are strong candidates for the fabrication of nanodevices based on the electric field-induced superconductivity modulation.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Unconventional long range triplet proximity effect in planar YBa_2Cu_3O_7/La_0.7Sr_0.3MnO_3/YBa_2Cu_3O_7 Josephson junctions

  • Sanchez-Manzano, David
  • Mesoraca, S.
  • Cuellar, F.
  • Cabero, M.
  • Rodriguez-Corvillo, S
  • Rouco Gómez, Víctor
  • Mompean, F
  • Garcia-Hernandez, M
  • Gonzalez-Calbet, J. M
  • Feuillet-Palma, C
  • Bergeal, N.
  • Lesueur, J
  • León Yebra, Carlos
  • Villegas, Javier E.
  • Santamaría Sánchez-Barriga, Jacobo
The proximity effect between superconductors and ferromagnets may become long range due to the generation of triplet pairs. The recent finding of a long, one micron-range unconventional Josephson effect between YBa_2Cu_3O_7 high Tc cuprates separated by a half metallic La_0.7Sr_0.3MnO_3 manganite ferromagnet has uncovered a novel unconventional triplet proximity effect. In this paper, we examine the temperature dependence of the critical current in planar Josephson junctions. We find that the critical current-normal resistance product follows the predictions of traditional superconductor-normal metal-superconductor junctions, which implies that triplet pairs in a ferromagnet are transported in the diffusive limit similarly to singlet pairs in a normal metal. This result calls for theoretical studies of the new triplet Josephson effect and underlines its potential in future superconducting spintronics.