Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 100
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Clinical Findings Arising from the Use of Silver Diamine Fluoride to Prevent or Treat Caries Lesions and Dentinal Hypersensitivity: A Data Mining Analysis

  • Rodrigues, Gabriella Fernandes
  • Jural, Lucas Alves
  • Martins, Mariana Leonel
  • Vollú, Ana Lúcia
  • Maia, Lucianne Cople
  • Corrêa, Ivo Carlos
  • Barja-Fidalgo, Fernanda
  • Fonseca-Gonçalves, Andrea
  • Vicente Gomila, José Miguel|||0000-0003-2001-8964
[EN] Objective: To summarize data of clinical trials that used silver diamine fluoride (SDF) to prevent and treat caries lesions and dentinal hypersensitivity. Material and Methods: Six electronic databases were searched in May 2022. The concentration of SDF, type of usage (alone/combined), dentition, anterior/posterior teeth, tooth region, dental tissue, number of the treated surfaces, the intervention environment, participants' age, frequency and duration of SDF application, purpose, and outcome were the extracted variables. The type of study, year of publication, authors, journals, and country were also investigated. Results: From 8860 articles, 53 were selected. Most were randomized (n=38), that applied 38% SDF (n=43), alone (n=44), on multiple surfaces (n=44), only in dentin (n=36), of the crown (n=46) of anterior and posterior (n=36) primary teeth (n=39). The studies were preferably carried out outside the clinic (n=31), only in children (n=33), with reapplication of SDF (n=30), but did not inform the duration of application (n=19). SDF was most used to treat (n=46) only caries lesions (n=50). They were published between 2001 and 2022, mainly in the Journal of Dentistry (n=10). China (n=19) and Lo E.C.M (n=19) were the countries and authors that published the most, respectively. Conclusion: The silver diamine fluoride 38% alone was most used to treat caries lesions in the dentin of the crown of all primary teeth, preferably applied on multiple surfaces, requiring reapplication, and outside the clinic., This study was supported in part by a scholarship from Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior -Brasil (CAPES), Finance Code 001. Also, the authors thank the Rio de Janeiro Research Foundation (FAPERJ) for financial support for this study (Grants # E-26/202.766/2019).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructure, Thermal, and Mechanical Behavior of NiTi Shape Memory Alloy Obtained by Micro Wire and Arc Direct Energy Deposition

  • da Silva, Tadeu C.
  • Sallica-Leva, Edwin
  • Santos, Claudio T.
  • Filho, João C. A. D.
  • Volpato, Neri
  • Lima, Dalton D.
  • Dornelas, Paulo H. G.
  • Tavares, Sergio S. M.
  • Santos, Telmo G.
  • E. Rayón|||0000-0002-0653-2046
[EN] Additive manufacturing (AM) is revolutionizing the fabrication of metallic components, offering significant potential to compete with or complement traditional casting, forging, and machining processes, and enabling the production of complex functional components. Recent advancements in AM technology have facilitated the processing of shape memory alloys (SMAs) with functional properties comparable to those of conventionally processed alloys. However, the AM of NiTi SMAs remains underexplored due to the extreme complexity of the process, high melting point, and reactivity with oxygen. This study investigates the impact of AM processing on the shape memory properties of NiTi alloys using the Micro Wire and Arc Directed Energy Deposition (mu-WA-DED) technique in short circuit mode with a pioneering 0.3 mm pre-alloyed wire, focusing on increasing precision and control in the deposition process. The macroscopic morphology, microstructure, phase composition, phase-transformation temperatures, and mechanical properties of each deposited layer were analyzed. Results indicated austenite (B2) as the predominant phase, with retained martensite (B19 ') and a reversible martensitic transformation (B2 reversible arrow B19 ') in the second layer. Mechanical characterization revealed variations in hardness (H) and elastic modulus (E) due to microstructural heterogeneity and composition. The first layer exhibited H = 3.8 GPa and E = 70 GPa, associated with the B2-NiTi phase, while higher values were obtained in the second layer, i.e., E = 100 GPa and H = 7 GPa. This study establishes for the first time the feasibility of NiTi alloy deposition with a 0.3 mm wire, setting a new standard for future research and applications in AM using mu-WA-DED., This research was funded by Carlos Chagas Filho Foundation for Research Support of Rio de Janeiro State (Fundacao Carlos Chagas Filho de Amparo a Pesquisa do Estado do Rio de Janeiro-FAPERJ in Portuguese), grant E-26/210.349/202.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A simheuristic algorithm for the stochastic permutation flow-shop problem with delivery dates and cumulative payoffs

  • Villarinho, Pedro A.
  • Panadero, Javier
  • Pessoa, Luciana S.
  • Oliveira, Fernando L. Cyrino
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] This paper analyzes the permutation flow-shop problem with delivery dates and cumulative payoffs (whenever these dates are met) under uncertainty conditions. In particular, the paper considers the realistic situation in which processing times are stochastic. The main goal is to find the permutation of jobs that maximizes the expected payoff. In order to achieve this goal, the paper first proposes a biased-randomized heuristic for the deterministic version of the problem. Then, this heuristic is extended into a metaheuristic by encapsulating it into a variable neighborhood descent framework. Finally, the metaheuristic is extended into a simheuristic by incorporating Monte Carlo simulations. According to the computational experiments, the level of uncertainty has a direct impact on the solutions provided by the simheuristic. Moreover, a risk analysis is performed using two well-known metrics: the value-at-risk and conditional value-at-risk., This work was supported by the Brazilian Coordination for the Improvement of Higher Level Personnel (CAPES) under grant (number 001); the Brazilian National Council for Scientific and Technological Development (CNPq) under grant (number 307403/2019-0); the Carlos Chagas Filho Research Support Foundation of the State of Rio de Janeiro (FAPERJ) under grants (numbers 202.673/2018, E-26/010.002576/2019 and 211.086/2019) and Spanish Ministry of Science (PID2019-111100RB-C21, RED2018-102642-T).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Collaboration and Decision Making in Crisis Situations

  • Vivacqua, Adriana S.
  • Garcia, Ana Cristina B.
  • Comes, Martina
  • Vieira, Vaninha
  • Canos Cerda, José Hilario|||0000-0001-8139-5195
[EN] Emergencies are critical situations that demand immediate action to avoid adverse consequences to life and property. Recent events around the world highlight the importance of the theme. A key challenge in Emergency Management is decision-making under time pressure, with an overload of unconfirmed, uncertain and conflicting information, including the management of many people, with distinct and possibly fluid roles, in different places. Collaboration in these settings is an interesting element, since emergency response generally involves multiple agencies and the public, which, having different views, protocols and priorities, must act in concert to handle the situation. In addition, an increasing amount of virtual information is necessary to inform and manage volunteers. The goal of this workshop is to identify and map the main challenges of collaboration in crisis situations, review current research methods and approaches to address them and address the lack of formal processes, structures, methodologies and tools., Adriana S Vivacqua is partially supported by CNPq grant 308425/2012-0 and FAPERJ grant E26/103.029/2012. Vaninha Vieira is partially supported by CNPq grant 490084/2013-3
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recommendations from paediatric dentistry associations of the Americas on breastfeeding and sugar consumption and oral hygiene in infants for the prevention of dental caries: A bibliometric review

  • Gomes Silva Cerqueira, Aline
  • Baraúna Magno, Marcela
  • Barja-Fidalgo, Fernanda
  • Cople Maia, Lucianne
  • Fonseca-Gonçalves, Andrea
  • Vicente Gomila, José Miguel|||0000-0003-2001-8964
[EN] Background The Internet provides a plethora of information on health issues related to children's oral health. Aim Identify online recommendations of paediatric dentistry associations of the Americas (PDAAs) regarding breastfeeding practices, weaning, sugar introduction and initiating oral hygiene. Design Websites of PDAAs were accessed to record recommendations/questions (Q) relevant to early childhood that specifically covered issues about exclusive breastfeeding-Q1, indications of bottle feeding-Q2, when and how to start weaning-Q3 and Q4, respectively, association of breast milk and dental caries-Q5, when to start oral hygiene and how to introduce it-Q6 and Q7, respectively, and guidance on the introduction of sugar-Q8. Similarity/dissimilarity frequencies between the associations (Euclidean distances) were calculated. Results From 35 countries on the two American continents, 21 associations were affiliated with the International Association of Paediatric Dentistry and/or the Latin American Pediatric Dentistry Association, whereas eight did not have websites. Higher (P < .05) dissimilarities for Q6 (68.2%), Q7 (72.7%), and Q8 (62.1%) were observed. Results were similar for Q1 and Q5 (P > .05). No association mentioned Q2, Q3 or Q4 responses, whereas Q7 was the most frequently discussed issue. Conclusion Not all of the investigated issues are mentioned on websites of PDAAs, potentially stymieing efforts by both the layperson and health professional to gather information., Fundacao Carlos Chagas Filho de Amparo a Pesquisa do Estado do Rio de Janeiro, Grant/Award Number: E-26/202.766/2019
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of obesity on biodistribution of nanoparticles

  • Felismino, Claudiana de Jesus
  • Helal-Neto, E.
  • Portilho, F.L.
  • Rocha Pinto, Suyene
  • Ferreira, Agatha de Assis
  • da Silva, Simone Vargas
  • Barja-Fidalgo, Thereza Christina
  • Santos-Oliveira, Ralph
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Nanoparticles have specific features (lipophilicity, surface charge, composition and size). Studies regarding the biological behavior of nanoparticles in diseases such diabetics and obesity are scarce. Here, we evaluated two nanoparticles: magnetic core mesoporous silica (MSN) (58 nm) and polycaprolactone (PCL) nanoparticle (280 nm) in obese mice. Changes in the biodistribution were observed, especially considering the mononuclear phagocyte system (MPS), and the visceral fat tissue. Nonetheless, our data corroborates the influence of size in the biodistribution in obese animals, supporting that smaller nanoparticles, may show a higher tissue deposition at spleen, due the associated splenomegaly and the complications arising from this state. Finally, our study demonstrated that, in obesity, probably due the low-grade inflammatory state associated with metabolic syndrome a difference in accumulation of nanoparticles was found, with profound impact in the tissue deposition of nanoparticles., The authors would like to thank the National Scientific and Technological Research Council (CNPQ) - no. 400018/2016-0 and the Rio de Janeiro State Research Foundation (FAPERJ) - E-26/102.940/2012 for funding. Authors also gratefully acknowledge the financial support from the Ministerio de Economía y Competitividad (Project MAT2012-38429-C04-01) and the Generalitat Valenciana (project PROMETEO/2009/016) for support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Worldwide research trends on the use of chemical-mechanical caries removal products over the years: a critical review

  • Souza, T. F.
  • Martins, M. L.
  • Magno, M. B.
  • Fonseca-Goncalves, A.
  • Maia, L. C.
  • Vicente Gomila, José Miguel|||0000-0003-2001-8964
[EN] Background Chemical¿mechanical caries removal (CMCR) products are in constant evolution and were recommended during the COVID-19 pandemic as substitutes for conventional caries removal. Aim Characterize the worldwide scientifc literature about CMCR products, over the years, by means of a critical review. Design Electronic search was performed on Medline/PubMed, Scopus, Web of Science, Cochrane Library, Lilacs, and Embase up to November 2020. Year, journal, country of authors, and type of study were the data extracted from the retrieved studies. Additional data of the clinical studies and systematic reviews were investigated. Results 2221 records were identifed, 397 selected. 2011¿2020 period concentrates higher number of publications (n=169), in the Journal of Dental Research (n=51), developed in Brazil (n=45) and India (n=44). Most studies were in vitro (n=211) and clinical trials (n=101). Carisolv¿ (n=48) and Papacarie Duo Gel¿ (n=33) were the most used products, prescript in isolated usage (n=101), and compared with drills (n=77). CMCR were more studied in primary teeth (n=78), receiving glass ionomer cement (GIC) (n=51) as restorative material. The most evaluated outcomes were time spent (n=48) and pain (n=41). Clinical application of CMCR takes more time than other techniques, but can also reduce patient anxiety, pain, and need for anesthesia. Conclusion In vitro and clinical studies with CMCR products have been increasing, mostly carried out in developing countries, evaluating Carisolv¿ and Papacarie Duo Gel¿. Clinical studies tend to evaluate the time spent and pain compared to drills for removing caries in primary teeth, posteriorly restored with GIC. CMCR clinical application reduces anxiety, pain, and need for anesthesia, despite increase treatments¿ time., This study was financed in part by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior -Brazil (CAPES) -Finance code 001, and Fundacao Carlos Chagas de Amparo a Pesquisa no Estado do Rio de Janeiro (FAPERJ)-Finance code E-26/202.766/2019, Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) -Finance code 401058/2016-6 -for the VantagePointT software. This study is part of the Master's thesis of the primary author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identification of Players Controlling Meristem Arrest Downstream of the FRUITFULL-APETALA2 Pathway

  • Martinez-Fernandez, Irene|||0000-0002-3386-779X
  • FERRANDIZ MAESTRE, CRISTINA|||0000-0002-2460-1068
  • Menezes de Moura, Stefanie
  • Alves-Ferreira, Marcio
  • Balanzà, Vicente
[EN] The end of the reproductive phase in monocarpic plants is determined by a coordinated arrest of all active meristems, a process known as global proliferative arrest (GPA). GPA is linked to the correlative control exerted by developing seeds and, possibly, the establishment of strong source-sink relationships. It has been proposed that the meristems that undergo arrest at the end of the reproductive phase behave at the transcriptomic level as dormant meristems, with low mitotic activity and high expression of abscisic acid response genes. Meristem arrest is also controlled genetically. In Arabidopsis (Arabidopsis thaliana), the MADS-box transcription factor FRUITFULL induces GPA by directly repressing genes of the APETALA2 (AP2) clade. The AP2 genes maintain shoot apical meristem (SAM) activity in part by keeping WUSCHEL expression active, but the mechanisms downstream of this pathway remain elusive. To identify target genes, we performed a transcriptomic analysis, inducing AP2 activity in meristems close to arrest. Our results suggest that AP2 controls meristem arrest by repressing genes related to axillary bud dormancy in the SAM and negative regulators of cytokinin signaling. In addition, our analysis indicates that genes involved in the response to environmental signals also respond to AP2, suggesting that it could modulate the end of flowering by controlling responses to both endogenous and exogenous signals. Our results support the previous observation that at the end of the reproductive phase the arrested SAM behaves as a dormant meristem, and they strongly support AP2 as a master regulator of this process., This work was supported by the Spanish Ministerio de Economia, Industria y Competitividad/Fondo Europeo de Desarrollo Regional, European Union (grant no. BIO2015-64531-R to C.F.), the Spanish Ministerio de Ciencias, Investigacion y Universisdades/Agencia estatal de Investigacion/Fondo Europeo de Desarrollo Regional, European Union (grant no. RTI2018-099239-B-I00 to C.F.), Generalitat Valenciana (grant no. PROMETEU/2019/004 to C.F.), the National Council for Scientific and Technological Development (grant no. CNPq, 308832/2017-5 to M.A.F.), the National Institute of Science and Technology (grant no. 465480/2014-4 to M.A.F.), the Carlos Chagas Filho Foundation for Research Support of the State of Rio de Janeiro (grant no. E-26/202.631/2019 to M.A.F.), and the European Union (grant no. FP7-PEOPLE-PIRSES-2009-247589 to C.F. and M.A.F.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving emergency plans management with SAGA

  • Canos Cerda, José Hilario|||0000-0001-8139-5195
  • Penades Gramage, María Carmen|||0000-0001-6674-4705
  • Llavador Campos, Manuel
  • Borges, Marcos
  • Gómez Llana, Abel
[EN] Emergency plans are the tangible result of the preparedness activities of the emergency management lifecycle. In many countries, public service organizations have the legal obligation to develop and maintain emergency plans covering all possible hazards relative to their areas of operation. However, little support is provided to planners in the development and use of plans. Often, advances in software technology have not been exploited, and plans remain as text documents whose accessibility is very limited. In this paper, we advocate for the definition and implementation of plan management processes as the first step to better produce and manage emergency plans. The main contribution of our work is to raise the need for IT-enabled planning environments, either at the national or organization-specific levels, which can lead to more uniform plans that are easier to evaluate and share, with support to stakeholders other than responders, among other advantages. To illustrate our proposal, we introduce SAGA, a framework that supports the full lifecycle of emergency plan management. SAGA provides all the actors involved in plan management with a number of tools to support all the stages of the plan lifecycle. We outline the architecture of the system, and show with a case study how planning processes can benefit from a system like SAGA., We thank J. Marzal and R. Garrido, from the UPV Prevention Service, for their cooperation in the early design of SAGA. The work of J.H. Canós, M.C. Penadés, M. Llavador and A. Gómez is partially funded by the Spanish Ministerio de Educación y Ciencia (MEC) under grant TIPEx (TIN2010-19859-C03-03). The work of M.R.S. Borges is partially supported by grant nos. 560223/2010-2 and 308003/2011-0 from CNPq (Brazil) and grant no. E-26/103.076/2011 from FAPERJ (Brazil). The cooperation between the Brazilian and the Spanish research groups was partially sponsored by the CAPES/MECD Cooperation Program, Project #169/PHB2007-0064-PC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quantifying usability of domain-specific languages: An empirical study on software maintenance

  • Albuquerque, Diego
  • Cafeo, Bruno
  • Garcia, Alessandro
  • Barbosa, Simone
  • Ribeiro, Antonio
  • Abrahao Gonzales, Silvia Mara|||0000-0003-3580-2014
A domain-specific language (DSL) aims to support software development by offering abstractions to a particular domain. It is expected that DSLs improve the maintainability of artifacts otherwise produced with general-purpose languages. However, the maintainability of the DSL artifacts and, hence, their adoption in mainstream development, is largely dependent on the usability of the language itself. Unfortunately, it is often hard to identify their usability strengths and weaknesses early, as there is no guidance on how to objectively reveal them. Usability is a multi-faceted quality characteristic, which is challenging to quantify beforehand by DSL stakeholders. There is even less support on how to quantitatively evaluate the usability of DSLs used in maintenance tasks. In this context, this paper reports a study to compare the usability of textual DSLs under the perspective of software maintenance. A usability measurement framework was developed based on the cognitive dimensions of notations. The framework was evaluated both qualitatively and quantitatively using two DSLs in the context of two evolving object-oriented systems. The results suggested that the proposed metrics were useful: (1) to early identify DSL usability limitations, (2) to reveal specific DSL features favoring maintenance tasks, and (3) to successfully analyze eight critical DSL usability dimensions., This work was funded by B. Cafeo CAPES PhD Scholarship, and CNPq scholarship grant number 141688/2013-0; A. Garcia FAPERJ - distinguished scientist grant (number E-26/102.211/2009), CNPq - productivity grants (number 305526/2009-0 and 308490/2012-6), Universal project grants (number 483882/2009-7 and 485348/2011-0), and PUC-Rio (productivity grant).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cladocroce caelum (Porifera) has a specialized growth region and a transcriptional regionalization across its body axis

  • Cajado, Bruno
  • Riesgo, Ana
  • Nunes-da-Fonseca, Rodrigo
  • Guerra-Almeida, Diego
  • Rodrigues, Bruno
  • Lanna, Emilio
Sponges (Porifera) are traditionally considered to lack defined body axes and regional specialization. Understanding whether sponges exhibit preferential growth regions and axial patterning is essential for elucidating the evolution of metazoan body plans. Here, we compared two body regions of the repent morph of Cladocroce caelum (Demospongiae): the proximal region, containing fully developed aquiferous system modules, and the distal region, hypothesized as the primary growth region. Our findings show that specimens predominantly grow from the distal region, where archaeocytes constitute the main cell type (mean 65.3%), whereas the proximal region features aquiferous system modules primarily composed of choanocytes (47%). To further explore molecular differences, we assembled a de novo reference transcriptome for C. caelum, recovering 99% of universal eukaryotic orthologous genes and 94% of metazoan orthologs. RNA-seq analysis revealed the expression of genes associated with the germline, stem cells, and developmental signaling pathways in both regions. However, we identified 11,421 differentially expressed genes (3,506 upregulated in the proximal region and 7,925 in the distal region). Notably, genes involved in the WNT, TGF-β, and MAPK pathways—key regulators of development and cell proliferation—were upregulated in the distal region. These findings provide morphological and molecular evidence of regional specialization in C. caelum, supporting the existence of a preferential growth region at the distal end. Our results suggest that despite the unique organization of the sponge body plan, some poriferans may possess specialized growth regions, akin to those in other metazoans., Foundation for Research Support of the State of Bahia; National Council for Scientific and Technological Development; Foundation for Research Support of the State of Rio de Janeiro; European Social Fund, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unconventional scaling and significant enhancement of the spin Seebeck effect in multilayers

  • Ramos, R.
  • Kikkawa, T.
  • Aguirre, M.H.
  • Lucas, I.
  • Anadón, A.
  • Oyake, T.
  • Uchida, K.
  • Adachi, H.
  • Shiomi, J.
  • Algarabel, P.A.
  • Morellón, L.
  • Maekawa, S.
  • Saitoh, E.
  • Ibarra, M.R.
Spin Seebeck effects (SSEs) have been investigated in highly crystalline magnetic multilayer Fe3O4/Pt]n films. Voltage as well as power generated by the SSE were found to be significantly enhanced with increasing the number of layers n. This voltage enhancement defies the simple understanding of the SSE and suggests that spin current flowing between the magnetic layers in the thickness direction plays an important role in multilayer SSE systems and the observed voltage enhancement.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nature of antiferromagnetic order in epitaxially strained multiferroic SrMnO3 thin films

  • Maurel, L.
  • Marcano, N.
  • Prokscha, T.
  • Langenberg, E.
  • Blasco, J.
  • Guzmán, R.
  • Suter, A.
  • Magén, C.
  • Morellón, L.
  • Ibarra, M.R.
  • Pardo, J.A.
  • Algarabel, P.A.
Epitaxial films of SrMnO3 and bilayers of SrMnO3/La0.67Sr0.33MnO3 have been deposited by pulsed laser deposition on different substrates, namely, LaAlO3 (001), (LaAlO3)0.3(Sr2AlTaO6)0.7 (001), and SrTiO3 (001), allowing us to perform an exhaustive study of the dependence of antiferromagnetic order and exchange bias field on epitaxial strain. The Néel temperatures (TN) of the SrMnO3 films have been determined by low-energy muon spin spectroscopy. In agreement with theoretical predictions, TN is reduced as the epitaxial strain increases. From the comparison with first-principles calculations, a crossover from G-type to C-type antiferromagnetic orders is proposed at a critical tensile strain of around 1.6±0.1%. The exchange bias (coercive) field, obtained for the bilayers, increases (decreases) by increasing the epitaxial strain in the SrMnO3 layer, following an exponential dependence with temperature. Our experimental results can be explained by the existence of a spin-glass (SG) state at the interface between the SrMnO3 and La0.67Sr0.33MnO3 films. This SG state is due to the competition between the different exchange interactions present in the bilayer and favored by increasing the strain in the SrMnO3 layer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Epitaxial Stabilization of the Perovskite Phase in (Sr1-xBax)MnO3 Thin

  • Langenberg, E.
  • Guzmán, R
  • Maurel, L.
  • Martínez de Baños, L.
  • Morellón, L.
  • Ibarra, M.R.
  • Herrero-Martín, J.
  • Blasco, J.
  • Magén, C.
  • Algarabel, P.A.
  • Pardo, J.A.
A novel mechanism of ferroelectricity driven by off-centering magnetic Mn4+ ions was proposed in (Sr1–xBax)­MnO3, in its ideal perovskite phase, which yields enormous expectations in the search for strong magnetoelectric materials. Still, the desired perovskite phase has never been stabilized in thin films due to its extremely metastable character. Here, we report on a thorough study of the perovskite phase stabilization of (Sr1–xBax)­MnO3 thin films, 0.2 ≤ x ≤ 0.5, grown by pulsed laser deposition onto (001)-oriented perovskite substrates. X-ray diffraction measurements and scanning transmission electron microscopy reveal that, under appropriate deposition conditions, the perovskite phase is fully stabilized over the nonferroelectric hexagonal phase, despite the latter being increasingly favored on increasing Ba-content. Moreover, we have managed to grow epitaxial coherent cube-on-cube (Sr1–xBax)­MnO3 films upon strains ranging from 0% to 4%. Our results become a milestone in further studying perovskite (Sr1–xBax)­MnO3 thin films and pave the way for tailoring ferroic and magnetoelectric properties either by strain engineering or Ba-doping.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strain-induced coupling of electrical polarization and structural defects in SrMnO3 films

  • Becher, Carsten
  • Maurel, Laura
  • Aschauer, Ulrich
  • Lilienblum, Martin
  • Magén, César
  • Meier, Dennis
  • Langenberg, Eric
  • Trassin, Morgan
  • Blasco, Javier
  • Krug, Ingo P.
  • Algarabel, Pedro A.
  • Spaldin, Nicola A.
  • Pardo, José A.
  • Fiebig, Manfred
Local perturbations in complex oxides, such as domain walls, strain and defects, are of interest because they can modify the conduction or the dielectric and magnetic response, and can even promote phase transitions. Here, we show that the interaction between different types of local perturbations in oxide thin films is an additional source of functionality. Taking SrMnO 3 as a model system, we use nonlinear optics to verify the theoretical prediction that strain induces a polar phase, and apply density functional theory to show that strain simultaneously increases the concentration of oxygen vacancies. These vacancies couple to the polar domain walls, where they establish an electrostatic barrier to electron migration. The result is a state with locally structured room-temperature conductivity consisting of conducting nanosized polar domains encased by insulating domain boundaries, which we resolve using scanning probe microscopy. Our 'nanocapacitor' domains can be individually charged, suggesting stable capacitance nanobits with a potential for information storage technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Contact-Free Mapping of Electronic Transport Phenomena of Polar Domains in SrMnO3 Films

  • Schaab, J.
  • Krug, I.P.
  • Doganay, H.
  • Hackl, J.
  • Gottlob, D.M.
  • Khan, M.I.
  • Nemsak, S.
  • Maurel, L.
  • Langenberg, E.
  • Algarabel, P.A.
  • Pardo, J.A.
  • Schneider, C.M.
  • Meier, D.
High-resolution mapping of electronic transport phenomena plays an increasingly important role for the characterization of ferroic domains and their functionality. At present, spatially resolved electronic transport data are commonly gained from local two-point measurements, collected in line-by-line scans with a conducting nanosized probe. Here, we introduce an innovative experimental approach based on low- energy electron microscopy. As a model case, we study polar domains of varying conductance in strained SrMnO3. By a direct comparison with conductive atomic force and electrostatic force microscopy, we reveal that the applied low-energy electron-microscopy experiment can be considered as an inverse IðVÞ measurement, providing access to the local electronic conductance with nanoscale resolution and short data-acquisition times in the order of 10–102 ms. Low-energy electrons thus hold yet unexplored application opportunities as a minimal-invasive probe for local electronic transport phenomena, opening a promising route towards spatially resolved, high-throughput sampling at the nanoscale.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Thermoelectric performance of spin Seebeck effect in Fe3O4/Pt-based thin film heterostructures

  • Ramos, R.
  • Anadón, A.
  • Lucas, I.
  • Uchida, K.
  • Algarabel, P.A.
  • Morellón, L.
  • Aguirre, M.H.
  • Saitoh, E.
  • Ibarra, M.R.
We report a systematic study on the thermoelectric performance of spin Seebeck devices based on Fe3O4/Pt junction systems. We explore two types of device geometries: a spin Hall thermopile and spin Seebeck multilayer structures. The spin Hall thermopile increases the sensitivity of the spin Seebeck effect, while the increase in the sample internal resistance has a detrimental effect on the output power. We found that the spin Seebeck multilayers can overcome this limitation since the multilayers exhibit the enhancement of the thermoelectric voltage and the reduction of the internal resistance simultaneously, therefore resulting in significant power enhancement. This result demonstrates that the multilayer structures are useful for improving the thermoelectric performance of the spin Seebeck effect.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Origin of inverse Rashba-Edelstein effect detected at the Cu/Bi interface using lateral spin valves

  • Isasa, M.
  • Martínez-Velarte, M.C.
  • Villamor, E.
  • Magén, C.
  • Morellón, L.
  • De Teresa, J.M.
  • Ibarra, M.R.
  • Vignale, G.
  • Chulkov, E.V.
  • Krasovskii, E.E.
  • Hueso, L.E.
  • Casanova, F.
The spin transport and spin-to-charge current conversion properties of bismuth are investigated using permalloy/copper/bismuth (Py/Cu/Bi) lateral spin valve structures. The spin current is strongly absorbed at the surface of Bi, leading to ultrashort spin-diffusion lengths. A spin-to-charge current conversion is measured, which is attributed to the inverse Rashba-Edelstein effect at the Cu/Bi interface. The spin-current-induced charge current is found to change direction with increasing temperature. A theoretical analysis relates this behavior to the complex spin structure and dispersion of the surface states at the Fermi energy. The understanding of this phenomenon opens novel possibilities to exploit spin-orbit coupling to create, manipulate, and detect spin currents in two-dimensional systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Characteristic length scale of the magnon accumulation in Fe3O4/Pt bilayer structures by incoherent thermal excitation

  • Anadon. A.
  • Ramos, R.
  • Lucas, I.
  • Algarabel, P. A.
  • Morellon, L.
  • Ibarra, M. R.
  • Aguirre, M. H.
The dependence of Spin Seebeck effect (SSE) with the thickness of the magnetic materials is studied by means of incoherent thermal excitation. The SSE voltage signal in Fe3O4/Pt bilayer structure increases with the magnetic material thickness up to 100¿nm, approximately, showing signs of saturation for larger thickness. This dependence is well described in terms of a spin current pumped in the platinum film by the magnon accumulation in the magnetic material. The spin current is generated by a gradient of temperature in the system and detected by the Pt top contact by means of inverse spin Hall effect. Calculations in the frame of the linear response theory adjust with a high degree of accuracy the experimental data, giving a thermal length scale of the magnon accumulation (¿) of 17¿±¿3¿nm at 300¿K and ¿¿=¿40¿±¿10¿nm at 70¿K.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polar-Graded Multiferroic SrMnO3 Thin Films

  • Guzmán, Roger
  • Maurel, Laura
  • Langenberg, Eric
  • Lupini, Andrew R.
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Magén, César
Engineering defects and strains in oxides provides a promising route for the quest of thin film materials with coexisting ferroic orders, multiferroics, with efficient magnetoelectric coupling at room temperature. Precise control of the strain gradient would enable custom tailoring of the multiferroic properties but presently remains challenging. Here we explore the existence of a polar-graded state in epitaxially strained antiferromagnetic SrMnO3 thin films, whose polar nature was predicted theoretically and recently demonstrated experimentally. By means of aberration-corrected scanning transmission electron microscopy we map the polar rotation of the ferroelectric polarization with atomic resolution, both far from and near the domain walls, and find flexoelectricity resulting from vertical strain gradients. The origin of this particular strain state is a gradual distribution of oxygen vacancies across the film thickness, according to electron energy loss spectroscopy. Herein we present a chemistry-mediated route to induce polar rotations in oxygen-deficient multiferroic films, resulting in flexoelectric polar rotations and with potentially enhanced piezoelectricity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Temperature dependence of the spin Seebeck effect in [Fe3O4/Pt]n multilayers

  • Ramos, R.
  • Kikkawa, T.
  • Anadón, A.
  • Lucas, I.
  • Uchida, K.
  • Algarabel, P.A.
  • Morellón, L.
  • Aguirre, M.H.
  • Saitoh, E.
  • Ibarra, M.R.
We report temperature dependent measurements of the spin Seebeck effect (SSE) in multilayers formed by repeated growth of a Fe3O4/Pt bilayer junction. The magnitude of the observed enhancement of the SSE, relative to the SSE in the single bilayer, shows a monotonic increase with decreasing the temperature. This result can be understood by an increase of the characteristic length for spin current transport in the system, in qualitative agreement with the recently observed increase in the magnon diffusion length in Fe3O4 at lower temperatures. Our result suggests that the thermoelectric performance of the SSE in multilayer structures can be further improved by careful choice of materials with suitable spin transport properties.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Preserving p-conjugation in covalently functionalized carbon nanotubes for optoelectronic applications

  • Setaro, A.
  • Adeli, M.
  • Glaeske, M.
  • Przyrembel, D.
  • Bisswanger, T.
  • Gordeev, G.
  • Maschietto, F.
  • Faghani, A.
  • Paulus, B.
  • Weinelt, M.
  • Arenal, R.
  • Haag, R.
  • Reich, S.
Covalent functionalization tailors carbon nanotubes for a wide range of applications in varying environments. Its strength and stability of attachment come at the price of degrading the carbon nanotubes sp 2 network and destroying the tubes electronic and optoelectronic features. Here we present a non-destructive, covalent, gram-scale functionalization of single-walled carbon nanotubes by a new 2+1] cycloaddition. The reaction rebuilds the extended p-network, thereby retaining the outstanding quantum optoelectronic properties of carbon nanotubes, including bright light emission at high degree of functionalization (1 group per 25 carbon atoms). The conjugation method described here opens the way for advanced tailoring nanotubes as demonstrated for light-triggered reversible doping through photochromic molecular switches and nanoplasmonic gold-nanotube hybrids with enhanced infrared light emission.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin Seebeck effect in insulating epitaxial gamma-Fe2O3 thin films

  • Jiménez Cavero, P.
  • Lucas, I.
  • Anadón, A.
  • Ramos, R.
  • Niizeki, T.
  • Aguirre, M.H.
  • Algarabel, P.A.
  • Uchida, K.
  • Ibarra, M.R.
  • Saitoh, E.
  • Morellón, L.
We report the fabrication of high crystal quality epitaxial thin films of maghemite (¿-Fe2O3), a classic ferrimagnetic insulating iron oxide. Spin Seebeck effect (SSE) measurements in ¿-Fe2O3/Pt bilayers as a function of sample preparation conditions and temperature yield a SSE coefficient of 0.5(1) µV/K at room temperature. Dependence on temperature allows us to estimate the magnon diffusion length in maghemite to be in the range of tens of nanometers, in good agreement with that of conducting iron oxide magnetite (Fe3O4), establishing the relevance of spin currents of magnonic origin in magnetic iron oxides.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structural and magnetic properties of core-shell Au/Fe 3 O 4 nanoparticles

  • León Félix, L.
  • Coaquira, J.A.H.
  • Martínez, M.A.R.
  • Goya, G.F.
  • Mantilla, J.
  • Sousa, M.H.
  • Valladares, L.D.L.S.
  • Barnes, C.H.W.
  • Morais, P.C.
We present a systematic study of core-shell Au/Fe 3 O 4 nanoparticles produced by thermal decomposition under mild conditions. The morphology and crystal structure of the nanoparticles revealed the presence of Au core of d = (6.9 ± 1.0) nm surrounded by Fe 3 O 4 shell with a thickness of ~3.5 nm, epitaxially grown onto the Au core surface. The Au/Fe 3 O 4 core-shell structure was demonstrated by high angle annular dark field scanning transmission electron microscopy analysis. The magnetite shell grown on top of the Au nanoparticle displayed a thermal blocking state at temperatures below T B = 59 K and a relaxed state well above T B. Remarkably, an exchange bias effect was observed when cooling down the samples below room temperature under an external magnetic field. Moreover, the exchange bias field (H EX) started to appear at T~40 K and its value increased by decreasing the temperature. This effect has been assigned to the interaction of spins located in the magnetically disordered regions (in the inner and outer surface of the Fe 3 O 4 shell) and spins located in the ordered region of the Fe 3 O 4 shell.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electrical conductivity of oxidized-graphenic nanoplatelets obtained from bamboo: Effect of the oxygen content

  • Gross, K.
  • Barragán, J.J.P.
  • Sangiao, S.
  • De Teresa, J.M.
  • Lajaunie, L.
  • Arenal, R.
  • Calderón, H.A.
  • Prieto, P.
The large-scale production of graphene and reduced-graphene oxide (rGO) requires low-cost and eco-friendly synthesis methods. We employed a new, simple, cost-effective pyrolytic method to synthetize oxidized-graphenic nanoplatelets (OGNP) using bamboo pyroligneous acid (BPA) as a source. Thorough analyses via high-resolution transmission electron microscopy and electron energy-loss spectroscopy provides a complete structural and chemical description at the local scale of these samples. In particular, we found that at the highest carbonization temperature the OGNP-BPA are mainly in a sp2 bonding configuration (sp2 fraction of 87%). To determine the electrical properties of single nanoplatelets, these were contacted by Pt nanowires deposited through focused-ion-beam-induced deposition techniques. Increased conductivity by two orders of magnitude is observed as oxygen content decreases from 17% to 5%, reaching a value of 2.3 103 S m-1 at the lowest oxygen content. Temperature-dependent conductivity reveals a semiconductor transport behavior, described by the Mott three-dimensional variable range hopping mechanism. From the localization length, we estimate a band-gap value of 0.22(2) eV for an oxygen content of 5%. This investigation demonstrates the great potential of the OGNP-BPA for technological applications, given that their structural and electrical behavior is similar to the highly reduced rGO sheets obtained by more sophisticated conventional synthesis methods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Intrinsic phonon properties of double-walled carbon nanotubes

  • Tran, H. N.
  • Levshov, D. I.
  • Nguyen, V. C.
  • Paillet, M.
  • Arenal, R.
  • Than, X. T.
  • Zahab, A. A.
  • Yuzyuk, Y. I.
  • Phan, N. M.
  • Sauvajol, J. -L
  • Michel, T.
Double-walled carbon nanotubes (DWNT) are made of two concentric and weakly van der Waals coupled single-walled carbon nanotubes (SWNT). DWNTs are the simplest systems for studying the mechanical and electronic interactions between concentric carbon layers. In this paper we review recent results concerning the intrinsic features of phonons of DWNTs obtained from Raman experiments performed on index-identified DWNTs. The effect of the interlayer distance on the strength of the mechanical and electronic coupling between the layers, and thus on the frequencies of the Raman-active modes, namely the radial breathinglike modes (RBLMs) and G-modes, are evidenced and discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancement of the spin Peltier effect in multilayers

  • Uchida, K.
  • Iguchi, R.
  • Daimon, S.
  • Ramos, R.
  • Anadón, A.
  • Lucas, I.
  • Algarabel, P.A.
  • Morellón, L.
  • Aguirre, M.H.
  • Ibarra, M.R.
  • Saitoh, E.
The spin Peltier effect (SPE), heat-current generation as a result of spin-current injection, has been investigated in alternately stacked Pt/Fe3O4 multilayer films. The temperature modulation induced by the SPE in the [Pt/Fe3O4] × n films was found to be significantly enhanced with increasing the number of Pt/Fe3O4 bilayers n. This SPE enhancement is much greater than that expected for a simple stack of independent Pt/Fe3O4 bilayers. The observed n dependence of the SPE can be explained by introducing spin-current redistribution in the multilayer films in the thickness direction, in a manner similar to the enhancement of the spin Seebeck effect in multilayers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin-phonon coupling in epitaxial Sr0.6Ba0.4MnO3 thin films

  • Goian, V.
  • Langenberg, E.
  • Marcano, N.
  • Bovtun, V.
  • Maurel, L.
  • Kempa, M.
  • Prokscha, T.
  • Kroupa, J.
  • Algarabel, P.A.
  • Pardo, J.A.
  • Kamba, S.
Spin-phonon coupling is investigated in epitaxially strained Sr1-xBaxMnO3 thin films with perovskite structure by means of microwave (MW) and infrared (IR) spectroscopy. In this work we focus on the Sr0.6Ba0.4MnO3 composition grown on (LaAlO3)0.3(Sr2AlTaO6)0.7 substrate. The MW complex electromagnetic response shows a decrease in the real part and a clear anomaly in the imaginary part around 150 K. Moreover, it coincides with a 17% hardening of the lowest-frequency polar phonon seen in IR reflectance spectra. In order to further elucidate this phenomenon, low-energy muon-spin spectroscopy was carried out, signaling the emergence of antiferromagnetic order with Néel temperature (TN) around 150 K. Thus, our results confirm that epitaxial Sr0.6Ba0.4MnO3 thin films display strong spin-phonon coupling below TN, which may stimulate further research on tuning the magnetoelectric coupling by controlling the epitaxial strain and chemical pressure in the Sr1-xBaxMnO3 system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantum interference effects on the intensity of the G modes in double-walled carbon nanotubes

  • Tran, H.N.
  • Blancon, J.C.
  • Arenal, R.
  • Parret, R.
  • Zahab, A.A.
  • Ayari, A.
  • Vallée, F.
  • Del Fatti, N.
  • Sauvajol, J.L.
  • Paillet, M.
The effects of quantum interferences on the excitation dependence of the intensity of G modes have been investigated on single-walled carbon nanotubes [Duque, Phys. Rev. Lett. 108, 117404 (2012)PRLTAO0031-900710.1103/PhysRevLett.108.117404]. In this work, by combining optical absorption spectroscopy and Raman scattering on individual index identified double-walled carbon nanotubes, we examine the experimental excitation dependence of the intensity of longitudinal optical and transverse optical G modes of the constituent inner and outer single-walled carbon nanotubes. The observed striking dependencies are understood in terms of quantum interference effects. Considering such effects, the excitation dependence of the different components of the G modes permits us to unambiguously assign each of them as originating from the longitudinal or transverse G modes of inner and outer tubes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structural and magnetic properties of [001] CoC r2 O4 thin films

  • Guzman, R.
  • Heuver, J.
  • Matzen, S.
  • Magén, C.
  • Noheda, B.
The spinel CoCr2O4 (CCO) is one of the few bulk multiferroics with net magnetic moment. However, studies on the properties of CCO thin films are scarce. Here, we investigate the interplay between microstructure and magnetism of a series of CCO epitaxial thin films by means of x-ray diffraction, magnetometry, and aberration-corrected scanning transmission electron microscopy (STEM). Optimum pristine CCO films can be grown on a substrate with spinel structure (MgAl2O4), despite the large lattice mismatch of ~3%. On the contrary, a substrate with lower lattice mismatch (~1%) but with the rock salt structure (MgO) favors the degradation of the CCO crystal quality by forming antiphase boundaries (APBs), drastically weakening the magnetization, in agreement with reports for other spinel films. Nevertheless, our results also show that the type and number of APBs can be tuned by changing the growth temperature to favor the ferromagnetic alignment between antiphase domains, giving rise to a partial recovery of the magnetization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Terahertz Spin Currents and Inverse Spin Hall Effect in Thin-Film Heterostructures Containing Complex Magnetic Compounds

  • Seifert, T.
  • Martens, U.
  • Günther, S.
  • Schoen, M.A.W.
  • Radu, F.
  • Chen, X.Z.
  • Lucas, I.
  • Ramos, R.
  • Aguirre, M.H.
  • Algarabel, P.A.
  • Anadón, A.
  • Körner, H.S.
  • Walowski, J.
  • Back, C.
  • Ibarra, M.R.
  • Morellón, L.
  • Saitoh, E.
  • Wolf, M.
  • Song, C.
  • Uchida, K.
  • Münzenberg, M.
  • Radu, I.
  • Kampfrath, T.
Terahertz emission spectroscopy (TES) of ultrathin multilayers of magnetic and heavy metals has recently attracted much interest. This method not only provides fundamental insights into photoinduced spin transport and spin-orbit interaction at highest frequencies, but has also paved the way for applications such as efficient and ultrabroadband emitters of terahertz (THz) electromagnetic radiation. So far, predominantly standard ferromagnetic materials have been exploited. Here, by introducing a suitable figure of merit, we systematically compare the strength of THz emission from X/Pt bilayers with X being a complex ferro-, ferri- and antiferromagnetic metal, that is, dysprosium cobalt (DyCo5), gadolinium iron (Gd24Fe76), magnetite (Fe3O4) and iron rhodium (FeRh). We find that the performance in terms of spin-current generation not only depends on the spin polarization of the magnet''s conduction electrons, but also on the specific interface conditions, thereby suggesting TES to be a highly interface-sensitive technique. In general, our results are relevant for all applications that rely on the optical generation of ultrafast spin currents in spintronic metallic multilayers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Review of magnetic nanostructures grown by focused electron beam induced deposition (FEBID)

  • De Teresa, J. M.
  • Fernández-Pacheco, A.
  • Córdoba, R.
  • Serrano-Ramón, L.
  • Sangiao, S.
  • Ibarra, M. R.
We review the current status of the use of focused electron beam induced deposition (FEBID) for the growth of magnetic nanostructures. This technique relies on the local dissociation of a precursor gas by means of an electron beam. The most promising results have been obtained using the Co2(CO)8 precursor, where the Co content in the grown nanodeposited material can be tailored up to more than 95 at.%. Functional behaviour of these Co nanodeposits has been observed in applications such as arrays of magnetic dots for information storage and catalytic growth, magnetic tips for scanning probe microscopes, nano-Hall sensors for bead detection, nano-actuated magnetomechanical systems and nanowires for domain-wall manipulation. The review also covers interesting results observed in Fe-based and alloyed nanodeposits. Advantages and disadvantages of FEBID for the growth of magnetic nanostructures are discussed in the article as well as possible future directions in this field.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

All-Carbon Electrode Molecular Electronic Devices Based on Langmuir–Blodgett Monolayers

  • Sangiao, S.
  • Martín, S.
  • González-Orive, A.
  • Magén, C.
  • Low, P.J.
  • De Teresa, J.M.
  • Cea, P.
Nascent molecular electronic devices, based on monolayer Langmuir–Blodgett films sandwiched between two carbonaceous electrodes, have been prepared. Tightly packed monolayers of 4-((4-((4-ethynylphenyl)ethynyl)phenyl)ethynyl)benzoic acid are deposited onto a highly oriented pyrolytic graphite electrode. An amorphous carbon top contact electrode is formed on top of the monolayer from a naphthalene precursor using the focused electron beam induced deposition technique. This allows the deposition of a carbon top-contact electrode with well-defined shape, thickness, and precise positioning on the film with nm resolution. These results represent a substantial step toward the realization of integrated molecular electronic devices based on monolayers and carbon electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pumping Metallic Nanoparticles with Spatial Precision within Magnetic Mesoporous Platforms: 3D Characterization and Catalytic Application

  • Miguel-Sancho, N.
  • Martinez, G.
  • Sebastian, V.
  • Malumbres, A.
  • Florea, I.
  • Arenal, R.
  • Ortega-Liebana, M.C.
  • Hueso, J.L.
  • Santamaria, J.
The present work shows an efficient strategy to assemble two types of functional nanoparticles onto mesoporous MCM-41 silica nanospheres with a high degree of spatial precision. In a first stage, magnetite nanoparticles are synthesized with a size larger than the support pores and grafted covalently through a peptide-like bonding onto their external surface. This endowed the silica nanoparticles with a strong superparamagnetic response, while preserving the highly ordered interior space for the encapsulation of other functional guest species. Second, we report the finely controlled pumping of preformed Pt nanoparticles (1.5 nm) within the channels of the magnetic MCM-41 nanospheres to confer an additional catalytic functionality to the multiassembled nanoplatform. The penetration depth of the metallic nanoparticles can be explained as a result of the interplay between the particle-wall electrostatic attraction and the repulsive forces between neighboring Pt nanoparticles. A detailed transmission electron microscopy and a 3D high-resolution high-angle annular dark-field detector electron tomography study were carried out to characterize the material and to explain the assembly mechanism. Finally, the performance of these multifunctional nanohybrids as magnetically recoverable catalysts has been evaluated in the selective hydrogenation of p-nitrophenol, a well-known pollutant and intermediate in multiple industrial processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Functionalization of MoS2 with 1, 2-dithiolanes: toward donor-acceptor nanohybrids for energy conversion

  • Canton-Vitoria, R.
  • Sayed-Ahmad-Baraza, Y.
  • Pelaez-Fernandez, M.
  • Arenal, R.
  • Bittencourt, C.
  • Ewels, C.P.
  • Tagmatarchis, N.
The covalent functionalization of exfoliated semiconducting MoS2 by 1, 2-dithiolanes bearing an ethylene glycol alkyl chain terminated to a butoxycarbonyl-protected amine and a photoactive pyrene moiety is accomplished. The MoS2-based nanohybrids were fully characterized by complementary spectroscopic, thermal, and microscopy techniques. Markedly, density functional theoretical studies combined with X-ray photoelectron spectroscopy analysis demonstrate preferential edge functionalization, primarily via sulfur addition along partially sulfur saturated zig-zag MoS2 molybdenum-edges, preserving intact the 2D basal structure of functionalized MoS2-based nanohybrids as confirmed by high-resolution transmission electron microscopy and electron energy loss spectroscopy. Furthermore, in the MoS2-pyrene hybrid, appreciable electronic interactions at the excited state between the photoactive pyrene and the semiconducting MoS2 were revealed as inferred by steady-state and time-resolved photoluminescence spectroscopy, implying its high potentiality to function in energy conversion schemes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Accurate determination of the chiral indices of individual carbon nanotubes by combining electron diffraction and Resonant Raman spectroscopy

  • Levshov, D. I.
  • Tran, H. N.
  • Paillet, M.
  • Arenal, R.
  • Than, X. T.
  • Zahab, A. A.
  • Yuzyuk, Y. I.
  • Sauvajol, J. -L
  • Michel, T.
The experimental approach combining high resolution transmission electron microscopy (HRTEM), electron diffraction (ED) and resonant Raman spectroscopy (RRS) on the same free-standing individual carbon nanotubes (CNT) is the most efficient method to determine unambiguously the intrinsic features of the Raman-active phonons. In this paper, we review the main results obtained by the approach regarding the intrinsic features of the phonons of single-walled (SWNT) and double-walled carbon nanotubes (DWNT). First, we detail the different methods to identify the structure of SWNTs and DWNTs from the analysis of their electron diffraction patterns (EDP). In the following, we remind the principal features of the Raman response of SWNTs, unambiguously index-identified by ED. A special attention is devoted to the effect of the inter-layer interaction on the frequencies of the Raman-active phonons in index-identified DWNTs. The information obtained on index-identified SWNT and DWNT allows us to propose Raman criteria, which help identifying CNT when the ED fails to propose a single assignment. The efficiency of the Raman criteria as the complement to the ED information for the index-assignment of a few SWNTs and DWNTs is shown. The same approach to index-assign a triple-walled carbon nanotube (TWNT), by combining ED and RRS information, is reported.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strontium Cobalt Oxide Misfit Nanotubes

  • Panchakarla, L. S.
  • Lajaunie, L.
  • Ramasubramaniam, A.
  • Arenal, R.
  • Tenne, R.
Low-dimensional misfit layered compounds have been found to have ultralow thermal conductivity, which is attributed to their unique structure and the low dimensionality. There are a few studies reporting the preparation of sulfide-based misfit nanotubes but only one study on oxide-based analogs. In this investigation, we report a new oxide-based misfit nanotube derived from misfit layered strontium cobaltite. Thorough structural investigation by electron microscopy techniques, including electron diffraction, aberration corrected high-resolution (scanning) transmission electron microscopy, and electron energy-loss spectroscopy along with density functional theory calculations show that these nanotubes consist of alternating layers of SrCoO2 and CoO2. We have studied systematically the effect of base concentration on the structure and composition of the nanotubes, which reveals the importance of misfit stress to tightly roll the structure into tubular form and thus control the synthesis. Electronic structure calculations find that the structures are semiconducting with a ferrimagnetic ground state. Our studies further extend the family of bulk misfit layered oxides into the 1D realm with potential applications in thermoelectric and electronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quaternary ChalCogenide-Based Misfit Nanotubes LnS(Se)-TaS(Se)(2) (Ln = La, Ce, Nd, and Ho): Synthesis and Atomic Structural Studies

  • Lajaunie, L.
  • Radovsky, G.
  • Tenne, R.
  • Arenal, R.
We have synthesized quaternary chalcogenide-based misfit nanotubes LnS(Se)-TaS2(Se) (Ln = La, Ce, Nd, and Ho). None of the compounds described here were reported in the literature as a bulk compound. The characterization of these nanotubes, at the atomic level, has been developed via different transmission electron microscopy techniques, including high-resolution scanning transmission electron microscopy, electron diffraction, and electron energy-loss spectroscopy. In particular, quantification at sub-nanometer scale was achieved by acquiring high-quality electron energy-loss spectra at high energy (similar to between 1000 and 2500 eV). Remarkably, the sulfur was found to reside primarily in the distorted rocksalt LnS lattice, while the Se is associated-with the hexagonal TaSe2 site. Consequently, these quaternary misfit layered compounds in the form of nanostructures possess a double superstructure of La/Ta and S/Se with the same periodicity. In addition, the interlayer spacing between the layers and the interatomic distances within the layer vary systematically in the nanotubes, showing clear reduction when going from the lightest (La atom) to the heaviest (Ho) atom. Amorphous layers, of different nature, were Observed at the surface of the nanotubes. For La-based NTs, the thin external amorphous layer (inferior to 10 nm) can be ascribed to a Se deficiency. Contrarily, for Ho-based NTs, the thick amorphous layer (between 10 and 20 nm) is clearly ascribed to oxidation. All of these findings helped us to understand the atomic structure of these new compounds and nanotubes thereof.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Weakly Trapped, Charged, and Free Excitons in Single-Layer MoS2 in the Presence of Defects, Strain, and Charged Impurities

  • Dubey, S.
  • Lisi, S.
  • Nayak, G.
  • Herziger, F.
  • Nguyen, V.-D.
  • Le Quang, T.
  • Cherkez, V.
  • González, C.
  • Dappe, Y.J.
  • Watanabe, K.
  • Taniguchi, T.
  • Magaud, L.
  • Mallet, P.
  • Veuillen, J.-Y.
  • Arenal, R.
  • Marty, L.
  • Renard, J.
  • Bendiab, N.
  • Coraux, J.
  • Bouchiat, V.
Few- and single-layer MoS2 host substantial densities of defects. They are thought to influence the doping level, the crystal structure, and the binding of electron-hole pairs. We disentangle the concomitant spectroscopic expression of all three effects and identify to what extent they are intrinsic to the material or extrinsic to it, i.e., related to its local environment. We do so by using different sources of MoS2 - a natural one and one prepared at high pressure and high temperature - and different substrates bringing varying amounts of charged impurities and by separating the contributions of internal strain and doping in Raman spectra. Photoluminescence unveils various optically active excitonic complexes. We discover a defect-bound state having a low binding energy of 20 meV that does not appear sensitive to strain and doping, unlike charged excitons. Conversely, the defect does not significantly dope or strain MoS2. Scanning tunneling microscopy and density functional theory simulations point to substitutional atoms, presumably individual nitrogen atoms at the sulfur site. Our work shows the way to a systematic understanding of the effect of external and internal fields on the optical properties of two-dimensional materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Extraordinary sensitizing effect of co-doped carbon nanodots derived from mate herb: application to enhanced photocatalytic degradation of chlorinated wastewater compounds under visible light

  • Ortega-Liebana, M. Carmen
  • Hueso, José L.
  • Ferdousi, Shammi
  • Arenal, Raul
  • Irusta, Silvia
  • Yeung, King L.
  • Santamaria, Jesus
tThe present work investigates the role of two types of carbon nanodots (CNDs) as novel sensitizers of TiO2to create a visible-light driven photo-catalyst that is not only efficient for solar-driven pollution abate-ment, but also inexpensive, durable and environmentally-friendly. Two widely available green organicprecursors, the Argentinean herb Mate and the Stevia plant have been selected as the carbogenic sourceto thermally induce the formation of different types of CNDs with different levels of N and P doping andtunable photoluminescence response in the UV–vis-near infrared (NIR) ranges. These CNDs have beensuccessfully assembled with TiO2to form heterogeneous photocatalysts that are highly active in thevisible-light and NIR- driven photodegradation of 2,4-dichlorophenol (2,4-DCP), a persistent chlorinatedorganic compound present in numerous pesticide formulations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical disorder in topological insulators: A route to magnetism tolerant Topological surface States

  • Martínez Velarte, Maria del Carmen
  • Kretz, Bernhard
  • Moro-Lagares, María
  • Aguirre, Myriam Haydee
  • Riedemann, Trevor M.
  • Lograsso, Thomas A.
  • Morellon, Luis
  • Ibarra, M Ricardo
  • Garcia-Lekue, Aran
  • Serrate, David
We show that the chemical inhomogeneity in ternary 3D topological insulators preserves the topological spin texture of their surface states against a net surface magnetization. The spin texture is that of a Dirac cone with helical spin structure in the reciprocal space, which gives rise to spin-polarized and dissipation-less charge currents. Thanks to the non-trivial topology of the bulk electronic structure, this spin texture is robust against most types of surface defects. However, magnetic perturbations break the time-reversal symmetry, enabling magnetic scattering and loss of spin coherence of the charge carriers. This intrinsic incompatibility precludes the design of magnetoelectronic devices based on the coupling between magnetic materials and topological surface states. We demonstrate that the magnetization coming from individual Co atoms deposited on the surface can disrupt the spin coherence of the carriers in the archetypal topological insulator Bi2Te3, while in Bi2Se2Te the spin texture remains unperturbed. This is concluded from the observation of elastic backscattering events in quasiparticle interference patterns obtained by scanning tunneling spectroscopy. The mechanism responsible for the protection is investigated by energy resolved spectroscopy and ab-initio calculations, and it is ascribed to the distorted adsorption geometry of localized magnetic moments due to Se-Te disorder, which suppresses the Co hybridization with the surface states
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

In-situ preparation of ultra-small Pt nanoparticles within rod-shaped mesoporous silica particles: 3-D tomography and catalytic oxidation of n-hexane

  • Uson, Laura
  • Hueso, José L.
  • Sebastian, Víctor
  • Arenal, Raul
  • Florea, Ileana
  • Irusta, Silvia
  • Arruebo, Manuel
  • Santamaria, Jesús
The shape and porous configuration of supports are key parameters to design outstanding catalysts. However, the selection of a proper mesoporous support, such as SBA-15, by itself does not guarantee accessibility to catalytic sites. The distribution of the active phase and its stability are strongly related to the procedure used to deposit it on the catalytic substrate. Herein, we have prepared rod-shaped SBA-15 silica supports functionalized with amine groups to facilitate the electrostatic attraction and a good distribution of the resulting Pt-based catalytic nanoparticles along the pore walls. Additionally, the use of tetrakis-(hydroxymethyl)-phosphonium chloride (THPC) as both reductant and stabilizer is presented as a novel alternative for Pt nanoparticle synthesis. The behaviour of this catalyst in the total oxidation of n-hexane demonstrates high activity and excellent stability after 70 h on reaction stream. STEM-HAADF and 3-D tomography were used to confirm the presence of the metallic nanoparticles within the mesochannels and to corroborate their reduced sintering after reaction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrid Noble-Metals/Metal-Oxide Bifunctional Nano-Heterostructure Displaying Outperforming Gas-Sensing and Photochromic Performances

  • Tobaldi, D.M.
  • Leonardi, S.G.
  • Movlaee, K.
  • Lajaunie, L.
  • Seabra, M.P.
  • Arenal, R.
  • Neri, G.
  • Labrincha, J.A.
As nanomaterials are dominating 21st century''s scene, multiple functionality in a single (nano)structure is becoming very appealing. Inspired by the Land of the Rising Sun, we designed a bifunctional (gas-sensor/photochromic) nanomaterial, made with TiO2 whose surface was simultaneously decorated with copper and silver (the Cu/Ag molar ratio being 3:1). This nanomaterial outperformed previous state-of-the-art TiO2-based sensors for the detection of acetone, as well as the Cu-TiO2-based photochromic material. It indeed possessed splendid sensitivity toward acetone (detection limit of 100 ppb, 5 times lower than previous state-of-the-art TiO2-based acetone sensors), as well as reduced response/recovery times at very low working temperature, 150 °C, for acetone sensing. Still, the same material showed itself to be able to (reversibly) change in color when stimulated by both UV-A and, most remarkably, visible light. Indeed, the visible-light photochromic performance was almost 3 times faster compared to the standard Cu-TiO2 photochromic material - that is, 4.0 min versus 10.8 min, respectively. It was eventually proposed that the photochromic behavior was triggered by different mechanisms, depending on the light source used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning shape, composition and magnetization of 3D cobalt nanowires grown by focused electron beam induced deposition (FEBID)

  • Pablo-Navarro, J.
  • Sanz-Hernández, D.
  • Magén, C.
  • Fernández-Pacheco, A.
  • De Teresa, J.M.
Electron beam induced deposition of 3D cobalt nanowires with simultaneous high metallic content (˜80% at.) and small diameter (<100 nm) has been achieved by optimization of the growth parameters. Two different growth modes have been identified, denoted as radial and linear. In the radial mode, the wire diameter is at least ˜120 nm and the Co content is greater than ˜85% at. In the linear mode, the diameter is smaller than 80 nm and the Co content is at best ˜80% at. A sharp transition between both growth modes can occur inside a single nanowire for certain experimental conditions. Electron holography measurements indicate that in optimized Co nanowires the magnetic induction is high enough for applications in spintronics, magnetic sensing and actuation at the nanoscale.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemical solution synthesis and ferromagnetic resonance of epitaxial thin films of yttrium iron garnet

  • Lucas, I.
  • Jimenez-Cavero, P.
  • Vila-Fungueirino, J.M.
  • Magen, C.
  • Sangiao, S.
  • de Teresa, J.M.
  • Morellon, L.
  • Rivadulla, F.
We report the fabrication of epitaxial Y3Fe5O12 (YIG) thin films on Gd3Ga5O12 (111) using a chemical solution method. Cubic YIG is a ferrimagnetic material at room temperature, with excellent magneto-optical properties, high electrical resistivity, and a very narrow ferromagnetic resonance, which makes it particularly suitable for applications in filters and resonators at microwave frequencies. But these properties depend on the precise stoichiometry and distribution of Fe3+ ions among the octahedral/tetrahedral sites of a complex structure, which hampered the production of high-quality YIG thin films by affordable chemical methods. Here we report the chemical solution synthesis of YIG thin films, with excellent chemical, crystalline, and magnetic homogeneity. The films show a very narrow ferromagnetic resonance (long spin relaxation time), comparable to that obtained from high-vacuum physical deposition methods. These results demonstrate that chemical methods can compete to develop nanometer-thick YIG films with the quality required for spintronic devices and other high-frequency applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlling the Electrical and Magnetoelectric Properties of Epitaxially Strained Sr1- xBaxMnO3 Thin Films

  • Langenberg, E.
  • Maurel, L.
  • Marcano, N.
  • Guzmán, R.
  • Štrichovanec, P.
  • Prokscha, T.
  • Magén, C.
  • Algarabel, P.A.
  • Pardo, J.A.
The perovskite (Sr, Ba)MnO3 system is an ideal candidate for tailoring electrical and magnetoelectric properties through the accurate control of Ba content and epitaxial strain due to the strong coupling between polar instability, spin order, and lattice. Here, first, the polar order is proved to be induced in Sr1- xBaxMnO3 thin films through lattice expansion either by epitaxial strain or chemical pressure, which correlates with the evolution of the dielectric properties. Second, due to strong spin–phonon coupling, a large magnetoelectric response is found in the (Sr, Ba)MnO3 system, in which the dielectric constant drops up to 50% when the antiferromagnetic order emerges, larger than most magnetoelectric oxides. More important, this coupling between magnetism and dielectric properties can be tuned from ˜18% to ˜50% by appropriately selecting Ba content and epitaxial strain. Third, a clear trend of increasing the band gap energy on increasing the unit cell volume either by epitaxial strain or chemical pressure is found, which opens the way for engineering the semiconducting properties of (Sr, Ba)MnO3 system at will. Thus, this work proves the possibility to design the electrical response and the magnetoelectric coupling in (Sr, Ba)MnO3 system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vertical Growth of Superconducting Crystalline Hollow Nanowires by He+ Focused Ion Beam Induced Deposition

  • Córdoba, R.
  • Ibarra, A.
  • Mailly, D.
  • De Teresa, J.M.
Novel physical properties appear when the size of a superconductor is reduced to the nanoscale, in the range of its superconducting coherence length (¿0). Such nanosuperconductors are being investigated for potential applications in nanoelectronics and quantum computing. The design of three-dimensional nanosuperconductors allows one to conceive novel schemes for such applications. Here, we report for the first time the use of a He+ focused-ion-beam-microscope in combination with the W(CO)6 precursor to grow three-dimensional superconducting hollow nanowires as small as 32 nm in diameter and with an aspect ratio (length/diameter) of as much as 200. Such extreme resolution is achieved by using a small He+ beam spot of 1 nm for the growth of the nanowires. As shown by transmission electron microscopy, they display grains of large size fitting with face-centered cubic WC1-x phase. The nanowires, which are grown vertically to the substrate, are felled on the substrate by means of a nanomanipulator for their electrical characterization. They become superconducting at 6.4 K and show large critical magnetic field and critical current density resulting from their quasi-one-dimensional superconducting character. These results pave the way for future nanoelectronic devices based on three-dimensional nanosuperconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On Rogers-Shephard type inequalities for general measures

  • Alonso Gutiérrez, David
  • Hernández Cifre,María A.
  • Roysdon, Michael
  • Yepes Nicolás, Jesús
  • Zvavitch Artrem
In this paper we prove a series of Rogers–Shephard type inequalities for convex bodies when dealing with measures on the Euclidean space with either radially decreasing densities or quasi-concave densities attaining their maximum at the origin. Functional versions of classical Rogers–Shephard inequalities are also derived as consequences of our approach.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Transmission XMCD-PEEM imaging of an engineered vertical FEBID cobalt nanowire with a domain wall

  • Wartelle, A.
  • Pablo-Navarro, J.
  • Stano, M.
  • Bochmann, S.
  • Pairis, S.
  • Rioult, M.
  • Thirion, C.
  • Belkhou, R.
  • Teresa, J.M.D.
  • Magén, C.
  • Fruchart, O.
Using focused electron-beam-induced deposition, we fabricate a vertical, platinum-coated cobalt nanowire with a controlled three-dimensional structure. The latter is engineered to feature bends along the height: these are used as pinning sites for domain walls, which are obtained at remanence after saturation of the nanostructure in a horizontally applied magnetic field. The presence of domain walls is investigated using x-ray magnetic circular dichroism (XMCD) coupled to photoemission electron microscopy (PEEM). The vertical geometry of our sample combined with the low incidence of the x-ray beam produce an extended wire shadow which we use to recover the wire''s magnetic configuration. In this transmission configuration, the whole sample volume is probed, thus circumventing the limitation of PEEM to surfaces. This article reports on the first study of magnetic nanostructures standing perpendicular to the substrate with XMCD-PEEM. The use of this technique in shadow mode enabled us to confirm the presence of a domain wall without direct imaging of the nanowire.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Core/Shell Nanoparticles of Non-Stoichiometric Zn-Mn and Zn-Co Ferrites as Thermosensitive Heat Sources for Magnetic Fluid Hyperthermia

  • Pilati, V.
  • Cabreira Gomes, R.
  • Gomide, G.
  • Coppola, P.
  • Silva, F.G.
  • Paula, F.L.O.
  • Perzynski, R.
  • Goya, G.F.
  • Aquino, R.
  • Depeyrot, J.
We report on the suitability of core/shell nanoparticles (NPs) for magnetic fluid hyperthermia in a self-regulated and theranostic approach. Aqueous magnetic colloids based on core/shell ZnxMnyFezO4@¿-Fe2O3 and ZnxCoyFezO4@¿-Fe2O3 NPs were produced by a three-step chemical synthesis. Systematic deviations from stoichiometry were observed with increasing Zn substitution for both series of samples. We investigated how the chemical composition affects the saturation magnetization, magnetic anisotropy, and thermomagnetic properties of these core/shell NPs. The heating efficiency through specific power absorption (SPA) was analyzed in the framework of the linear response theory. SPA values obtained for NPs present a different contrast of anisotropy between the core and shell materials, indicating no evidence of the contribution of enhanced exchange coupling to the heating efficiency.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The relevance of Brownian relaxation as power absorption mechanism in Magnetic Hyperthermia

  • Torres, T.E.
  • Lima, E.Jr.
  • Calatayud, M.P.
  • Sanz, B.
  • Ibarra, A.
  • Fernández-Pacheco, R.
  • Mayoral, A.
  • Marquina, C.
  • Ibarra, M.R.
  • Goya, G.F.
The Linear Response Theory (LRT) is a widely accepted framework to analyze the power absorption of magnetic nanoparticles for magnetic fluid hyperthermia. Its validity is restricted to low applied fields and/or to highly anisotropic magnetic nanoparticles. Here, we present a systematic experimental analysis and numerical calculations of the specific power absorption for highly anisotropic cobalt ferrite (CoFe 2 O 4 ) magnetic nanoparticles with different average sizes and in different viscous media. The predominance of Brownian relaxation as the origin of the magnetic losses in these particles is established, and the changes of the Specific Power Absorption (SPA) with the viscosity of the carrier liquid are consistent with the LRT approximation. The impact of viscosity on SPA is relevant for the design of MNPs to heat the intracellular medium during in vitro and in vivo experiments. The combined numerical and experimental analyses presented here shed light on the underlying mechanisms that make highly anisotropic MNPs unsuitable for magnetic hyperthermia.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interface-induced anomalous Nernst effect in Fe 3 O 4 /Pt-based heterostructures

  • Ramos, R.
  • Kikkawa, T.
  • Anadón, A.
  • Lucas, I.
  • Niizeki, T.
  • Uchida, K.
  • Algarabel, P.A.
  • Morellón, L.
  • Aguirre, M.H.
  • Ibarra, M.R.
  • Saitoh, E.
We have studied the anomalous Nernst effect (ANE) in [Fe 3 O 4 /Pt]-based heterostructures grown at high temperature, by measuring the ANE-induced electric field with a magnetic field applied normal to the sample surface, in the perpendicular magnetized configuration, where only the ANEs from the ferromagnetic layers or magnetic proximity effects can be detected. An ANE voltage is observed for [Fe 3 O 4 /Pt] n multilayers, and we further investigated its origin by performing measurements in [Fe 3 O 4 /Pt/Fe 3 O 4 ] trilayers as a function of the Pt thickness. Our results suggest the presence of an interface-induced ANE in the metallic layer, possibly driven by a heat induced subnanometer interdiffusion which affects the nature of the Fe 3 O 4 /Pt interface. Despite this ANE, the spin Seebeck effect is the dominant mechanism for the transverse thermoelectric voltage in the in-plane magnetized configuration, accounting for about 70% of the voltage in the multilayers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cluster-glass dynamics of the Griffiths phase in Tb5-xLaxSi2Ge2

  • Marcano, N.
  • Algarabel, P.A.
  • Barquín, L.F.
  • Araujo, J.P.
  • Pereira, A.M.
  • Belo, J.H.
  • Magén, C.
  • Morellón, L.
  • Ibarra, M.R.
The static magnetization and dynamic susceptibility responses of the cluster system within a Griffiths phase of the magnetocaloric compound Tb5-xLaxSi2Ge2 (x=0.075) have been investigated. A novel cluster-glass state within the Griffiths phase is formed at a characteristic freezing temperature where short-range ferromagnetic correlations set in the paramagnetic regime. Ferromagneticlike correlations are built up at around 155 K, which suddenly become frozen at a lower temperature ~140K, thus in analogy with a reentrant spin glass behavior. The ac susceptibility near the freezing temperature follows a critical slowing down process characterized by t0=10-13s and dynamic exponents z¿~6 and ß~0.4, similar to well-known spin glass systems. The nonlinear ac susceptibility analysis shows clearly the existence of a transition associated to the reentrant behavior. The origin of the intermediate cluster-glass phase inside the Griffiths phase is proposed to be the result of a combination of short-ranged RKKY intralayer positive exchange interactions between rare-earth Tb3+ ions and antiferromagnetic exchange between adjacent interlayers involving Si and Ge atoms in connection to the Tb3+ atoms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quasigeostrophic Equations for Fractional Powers of Infinitesimal Generators

  • Abadias, L.
  • Miana, P.J.
In this paper we treat the following partial differential equation, the quasigeostrophic equation: d / dt + u · grad f = - s - A a f, 0 = a = 1, where (A, D (A)) is the infinitesimal generator of a convolution C 0 -semigroup of positive kernel on L p (R n), with 1 = p < 8. Firstly, we give remarkable pointwise and integral inequalities involving the fractional powers (- A) a for 0 = a = 1. We use these estimates to obtain L p -decayment of solutions of the above quasigeostrophic equation. These results extend the case of fractional derivatives (taking A = ¿, the Laplacian), which has been studied in the literature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced thermo-spin effects in iron-oxide/metal multilayers

  • Ramos, R.
  • Lucas, I.
  • Algarabel, P.A.
  • Morellón, L.
  • Uchida, K.
  • Saitoh, E.
  • Ibarra, M.R.
Since the discovery of the spin Seebeck effect (SSE), much attention has been devoted to the study of the interaction between heat, spin, and charge in magnetic systems. The SSE refers to the generation of a spin current upon the application of a thermal gradient and detected by means of the inverse spin Hall effect. Conversely, the spin Peltier effect (SPE) refers to the generation of a heat current as a result of a spin current induced by the spin Hall effect. Here we report a strong enhancement of both the SSE and SPE in Fe3O4/Pt multilayered thin films at room temperature as a result of an increased thermo-spin conversion efficiency in the multilayers. These results open the possibility to design thin film heterostructures that may boost the application of thermal spin currents in spintronics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multiband light emission and nanoscale chemical analyses of carbonized fumed silica

  • Vasin, A.V.
  • Kysil, D.V.
  • Lajaunie, L.
  • Rudko, G.Y.
  • Lysenko, V.S.
  • Sevostianov, S.V.
  • Tertykh, V.A.
  • Piryatinski, Y.P.
  • Cannas, M.
  • Vaccaro, L.
  • Arenal, R.
  • Nazarov, A.N.
Fumed silica with a specific area of 295 m(2)/g was carbonized by successive phenyltrimethoxysilane treatments followed by annealing in inert atmosphere up to 650 degrees C. Emission, excitation, kinetics, and photo-induced bleaching effects were investigated by steady state and time-resolved photoluminescence spectroscopies. The local chemistry was also studied by infrared transmission spectroscopy. Strong ultraviolet and visible photoluminescence was observed in the samples after the chemical treatments/modifications and thermal annealing. It has been shown that ultraviolet photoluminescence in chemically modified fumed silica is associated with phenyl groups, while near ultraviolet and visible emission in annealed samples originated from inorganic pyrolytic carbon precipitates dispersed in the silica host matrix. Two types of emission bands were identified as a function of the annealing temperature: one is in the near UV and the other is in the visible range. Based on the emission/excitation analysis of these two bands, as well as on correlations with the synthesis conditions, a structural-energy concept of light-emitting centers has been proposed. According to this model, the light-emitting centers are associated with carbon clusters that can be bonded or adsorbed on the silica surface. This has been validated by a detailed (S)TEM-electron energy-loss spectroscopy study, confirming the inhomogeneous distribution of nanoscale carbon precipitates at the surface of the silica nanoparticles. These carbon precipitates are mostly amorphous although they possess some degree of graphitization and local order. Finally, the fraction of sp(2) carbon in these nanoclusters has been estimated to be close to 80%. Published by AIP Publishing.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Plasmonic properties of an Ag@Ag2Mo2O7 hybrid nanostructure easily designed by solid-state photodeposition from very thin Ag2Mo2O7 nanowires

  • Hakouk, K.
  • Lajaunie, L.
  • El Bekkachi, H.
  • Serier-Brault, H.
  • Humbert, B.
  • Arenal, R.
  • Dessapt, R.
A new Ag@m-Ag2Mo2O7 plasmonic hybrid nanostructure was designed by an easy two-step synthesis method. Firstly, very thin photosensitive monoclinic m-Ag2Mo2O7 nanowires (NWs) were synthesized under ambient pressure and at low temperature by using Ag2Mo3O10·2H2O NWs as a pre-nanostucturated starting material. This innovative soft chemistry route offers some precise control over the purity, the structure and the nanostructuration of the m-Ag2Mo2O7 NWs that exhibit a very thin diameter of around 100 nm and a superior specific surface area compared to previously reported synthesis methods. Secondly, the plasmonic hybrid nanostructure Ag@m-Ag2Mo2O7 was easily in situ obtained via an all solid-state photodeposition method, by irradiating the m-Ag2Mo2O7 NWs under low energy and low-power UV-light. The composition, morphology and plasmonic properties of the nanocomposite were investigated by a combination of energy-dispersive X-ray spectroscopy, high-resolution scanning transmission electron microscopy, X-ray photoelectron spectroscopy and Auger spectroscopy, and near-infrared, Raman and UV-vis spectroscopies as well as spatially-resolved electron energy-loss spectroscopy. A plausible mechanism explaining the formation of the nano-heterostructure under irradiation was also discussed. The Ag@m-Ag2Mo2O7 nanostructure manifests interesting plasmonic properties particularly high surface-enhanced Raman scattering (SERS) sensitivity probed using 2, 2'-bipyridine.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Probing the morphology of epitaxial Fe/MgO discontinuous multilayers by magnetometric technique

  • Vovk, A.
  • García-García, A.
  • Pogorelov, Y.G.
  • Pardo, J.A.
  • Štrichovanec, P.
  • Magén, C.
  • Algarabel, P.A.
  • Araujo, J.P.
  • Kakazei, G.N.
Discontinuous metal-insulator multilayers (DMIMs) are a special type of nanostructures with a layered arrangement of metallic particles sandwiched between continuous insulating layers. DMIMs exhibit moderate tunneling magnetoresistance (TMR) ratio but enhanced low-field sensitivity, which makes them promising candidates for magnetic field sensors. Recently we have grown epitaxial Fe/MgO DMIMs on MgO (0 0 1) single crystal substrates at different deposition conditions. Here, based on the analysis of magnetic isotherms in a broad temperature range, the effect of deposition temperature (TS) on microstructure of DMIMs is being studied and compared with the results of Transmission Electron Microscopy. It is shown that metallic layers consist of flat nanoparticles whose average size decreases, and their crystallinity improves with the increase of TS.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gaussian fluctuations for high-dimensional random projections of ln p-balls

  • Alonso-Gutiérrez, David
  • Prochno, Joscha
  • Thäle, Christoph
In this paper, we study high-dimensional random projections of ln p-balls. More precisely, for any n ¿ N let En be a random subspace of dimension kn ¿ {1, . . ., n} and Xn be a random point in the unit ball of ln p. Our work provides a description of the Gaussian fluctuations of the Euclidean norm ||PEnXn|| 2 of random orthogonal projections of Xn onto En. In particular, under the condition that kn ¿ 8 it is shown that these random variables satisfy a central limit theorem, as the space dimension n tends to infinity. Moreover, if kn ¿ 8 fast enough, we provide a Berry-Esseen bound on the rate of convergence in the central limit theorem. At the end, we provide a discussion of the large deviations counterpart to our central limit theorem.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

NanoSQUID Magnetometry on Individual As-grown and Annealed Co Nanowires at Variable Temperature

  • Martínez-Pérez, M.J.
  • Pablo-Navarro, J.
  • Müller, B.
  • Kleiner, R.
  • Magén, C.
  • Koelle, D.
  • De Teresa, J.M.
  • Sesé, J.
Performing magnetization studies on individual nanoparticles is a highly demanding task, especially when measurements need to be carried out under large sweeping magnetic fields or variable temperature. Yet, characterization under varying ambient conditions is paramount in order to fully understand the magnetic behavior of these objects, e.g., the formation of nonuniform states or the mechanisms leading to magnetization reversal and thermal stability. This, in turn, is necessary for the integration of magnetic nanoparticles and nanowires into useful devices, e.g., spin-valves, racetrack memories, or magnetic tip probes. Here, we show that nanosuperconducting quantum interference devices based on high critical temperature superconductors are particularly well suited for this task. We have successfully characterized a number of individual Co nanowires grown through focused electron beam induced deposition and subsequently annealed at different temperatures. Magnetization measurements performed under sweeping magnetic fields (up to 100 mT) and variable temperature (1.4-80 K) underscore the intrinsic structural and chemical differences between these nanowires. These point to significant changes in the crystalline structure and the resulting effective magnetic anisotropy of the nanowires, and to the nucleation and subsequent vanishing of antiferromagnetic species within the nanowires annealed at different temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Diameter distribution by deconvolution (DdD): absorption spectra as a practical tool for semiconductor nanoparticle PSD determination

  • Onna, Diego
  • Perez-Ipiña, Ignacio
  • Fernández-Casafuz, Agustina
  • Mayoral, Álvaro
  • Ibarra García, M. Ricardo
  • Bilmes, Sara A.
  • Martínez-Ricci, María Luz
Semiconductor nanoparticles (SNPs) are excellent candidates for various applications in fields like solar cells, light emitting diodes or sensors. Their size strongly determines their properties, thus characterizing their size is crucial for applications. In most cases, they are included in complex matrices which make it difficult to determine their average diameter and statistical distribution. In this work, we present a non-destructive, cheap and in situ procedure to calculate particle size distributions (PSDs) of SNPs in different media based on deconvolution of the absorbance spectrum with a database of the absorbance spectra of SNPs with different sizes. The method was validated against the SNP sizes obtained from transmission microscopy images, showing excellent agreement between both distributions. In particular, CdS SNPs embedded in mesoporous thin films were analyzed in detail. Additional composite systems were studied in order to extend the method to SNPs in polymers or bacteria, proving that it applies to several SNPs in diverse matrices. The PSDs obtained from the proposed method do not show any statistical difference with the one derived from TEM images. Finally, a web app that implements the methodology of this work has been developed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic graphene oxide nanocarrier for targeted delivery of cisplatin: A perspective for glioblastoma treatment

  • Makharza, Sami A.
  • Cirillo, Giuseppe
  • Vittorio, Orazio
  • Valli, Emanuele
  • Voli, Florida
  • Farfalla, Annafranca
  • Curcio, Manuela
  • Iemma, Francesca
  • Nicoletta, Fiore P.
  • El-Gendy, Ahmed A.
  • Goya, Gerardo F.
  • Hampel, Silke
Selective vectorization of Cisplatin (CisPt) to Glioblastoma U87 cells was exploited by the fabrication of a hybrid nanocarrier composed of magnetic ¿-Fe2 O3 nanoparticles and nanographene oxide (NGO). The magnetic component, obtained by annealing magnetite Fe3 O4 and characterized by XRD measurements, was combined with NGO sheets prepared via a modified Hummer’s method. The morphological and thermogravimetric analysis proved the effective binding of ¿-Fe2 O3 nanoparticles onto NGO layers. The magnetization measured under magnetic fields up to 7 Tesla at room temperature revealed superparamagnetic-like behavior with a maximum value of MS = 15 emu/g and coercivity HC ˜ 0 Oe within experimental error. The nanohybrid was found to possess high affinity towards CisPt, and a rather slow fractional release profile of 80% after 250 h. Negligible toxicity was observed for empty nanoparticles, while the retainment of CisPt anticancer activity upon loading into the carrier was observed, together with the possibility to spatially control the drug delivery at a target site.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Three-dimensional core-shell ferromagnetic nanowires grown by focused electron beam induced deposition

  • Pablo-Navarro, Javier
  • Magén, César
  • De Teresa, José María
Functional nanostructured materials often rely on the combination of more than one material to confer the desired functionality or an enhanced performance of the device. Here we report the procedure to create nanoscale heterostructured materials in the form of core-shell nanowires by focused electron beam induced deposition (FEBID) technologies. In our case, three-dimensional (3D) nanowires (<100 nm in diameter) with metallic ferromagnetic cores of Co- and Fe-FEBID have been grown and coated with a protective Pt-FEBID shell (ranging 10-20 nm in thickness) aimed to minimize the degradation of magnetic properties caused by the surface oxidation of the core to a non-ferromagnetic material. The structure, chemistry and magnetism of nanowire cores of Co and Fe have been characterized in Pt-coated and uncoated nanostructures to demonstrate that the morphology of the shell is conserved during Pt coating, the surface oxidation is suppressed or confined to the Pt layer, and the average magnetization of the core is strengthened up to 30%. The proposed approach paves the way to the fabrication of 3D FEBID nanostructures based on the smart alternate deposition of two or more materials combining different physical properties or added functionalities.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Percolating Metallic Structures Templated on Laser-Deposited Carbon Nanofoams Derived from Graphene Oxide: Applications in Humidity Sensing

  • Nufer, Sebastian
  • Fantanas, Dimitrios
  • Ogilvie, Sean P.
  • Large, Matthew J.
  • Winterauer, Dominik J.
  • Salvage, Jonathan P.
  • Meloni, Manuela
  • King, Alice A. K.
  • Schellenberger, Pascale
  • Shmeliov, Aleksey
  • Victor-Roman, Sandra
  • Pelaez-Fernandez, Mario
  • Nicolosi, Valeria
  • Arenal, Raul
  • Benito, Ana M.
  • Maser, Wolfgang
  • Brunton, Adam
  • Dalton, Alan B.
Carbon nanofoam (CNF) is a low-density, high-surface-area material formed by aggregation of amorphous carbon nanoparticles into porous nanostructures. We report the use of a pulsed infrared laser to prepare CNF from a graphene oxide (GO) target material. Electron microscopy shows that the films consist of dendritic strings that form web-like three-dimensional structures. The conductivity of these structures can be modified by using the CNF as a nanostructured scaffold for gold nanoparticles deposited by sputter coating, controllably increasing the conductivity by up to 4 orders of magnitude. The ability to measure the conductivity of the porous structures allows electrochemical measurements in the environment. Upon decreasing humidity, the pristine CNF exhibits an increase in resistance with a quick response and recovery time. By contrast, the gold-sputtered CNF showed a decrease in resistance, indicating modification of the doping mechanism due to water adsorption. The sensitivity to humidity is eliminated at the percolation threshold of the metal on the CNF.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Purified and crystalline three-dimensional electron-beam-induced deposits: the successful case of cobalt for high-performance magnetic nanowires

  • Pablo-Navarro, Javier
  • Magén, César
  • De Teresa, José María
Focused-electron-beam-induced deposition (FEBID) is considered the ultimate direct-write lithography technique for three-dimensional (3D) structures. However, it has not yet been possible to obtain 3D deposits by FEBID with the same purity and crystallinity of the corresponding bulk materials. In the present work, purified and crystalline 3D Co nanowires of diameter below 90 nm have been fabricated by ex situ high-vacuum annealing at 600 °C after FEBID growth. With an increase of the metallic content of the nanowires up to 95 atom %, the thermal annealing process induces recrystallization of the pseudoamorphous as-grown structure into bulklike, hexagonal-closest-packed, and face-centered-cubic crystallites with lateral sizes comparable to the nanowire’s width. The net magnetization increases 80% with respect to the as-grown values, up to 1.61 ± 0.06 T, near bulk Co. This achievement opens new pathways for applications of this synthetic method in the fabrication of either individual or arrays of 3D high-purity and crystalline Co nanowires for high-density memory and logic devices, nanosensors, and actuators, and could be a viable method to obtain other pure and crystalline 3D materials by FEBID.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gold-decorated magnetic nanoparticles design for hyperthermia applications and as a potential platform for their surface-functionalization

  • León Félix L.
  • Sanz B.
  • Sebastián V.
  • Torres T.E.
  • Sousa M.H.
  • Coaquira J.A.H.
  • Ibarra M.R.
  • Goya G.F.
The integration of noble metal and magnetic nanoparticles with controlled structures that can couple various specific effects to the different nanocomposite in multifunctional nanosystems have been found interesting in the field of medicine. In this work, we show synthesis route to prepare small Au nanoparticles of sizes <d> = 3.9 ± 0.2 nm attached to Fe 3 O 4 nanoparticle cores (<d> = 49.2 ± 3.5 nm) in aqueous medium for potential application as a nano-heater. Remarkably, the resulted Au decorated PEI-Fe 3 O 4 (Au@PEI-Fe 3 O 4 ) nanoparticles are able to retain bulk magnetic moment M S = 82–84 Am 2 /kg Fe3O4 , with the Verwey transition observed at T V = 98 K. In addition, the in vitro cytotoxicity analysis of the nanosystem microglial BV2 cells showed high viability (>97.5%) to concentrate up to 100 µg/mL in comparison to the control samples. In vitro heating experiments on microglial BV2 cells under an ac magnetic field (H 0 = 23.87 kA/m; f = 571 kHz) yielded specific power absorption (SPA) values of SPA = 43 ± 3 and 49 ± 1 µW/cell for PEI-Fe 3 O 4 and Au@PEI-Fe 3 O 4 NPs, respectively. These similar intracellular SPA values imply that functionalization of the magnetic particles with Au did not change the heating efficiency, providing at the same time a more flexible platform for multifunctional functionalization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interfacial ferromagnetism and atomic structures in high-temperature grown Fe3O4/Pt/Fe3O4 epitaxial trilayers

  • Kikkawa, T.
  • Suzuki, M.
  • Ramos, R.
  • Aguirre, M.H.
  • Okabayashi, J.
  • Uchida, K.
  • Lucas, I.
  • Anadón, A.
  • Kikuchi, D.
  • Algarabel, P.A.
  • Morellón, L.
  • Ibarra, M.R.
  • Saitoh, E.
Induced Pt ferromagnetism in Fe 3 O 4 / Pt / Fe 3 O 4 epitaxial trilayer films has been investigated by means of X-ray magnetic circular dichroism (XMCD) at the Pt L 3, 2-edges at various temperatures from 300 K to 12 K, including the metal-insulator transition temperature of Fe 3 O 4 (T V ~ 114 K). At all the temperatures, we observed clear XMCD signals due to Pt ferromagnetism, the amplitude of which was determined to be 0.39 µ B at 300 K and 0.52 µ B at 12 K for the sample with the Pt thickness of ~ 2 nm. Interestingly, these values are comparable to or even greater than those in Pt/3 d-ferromagnetic-metal (Fe, Ni, Co, and Ni 81 Fe 19) junction systems. The results can be interpreted in terms of a possible Fe interdiffusion into the Pt layer and also possible Fe-Pt alloying due to its high-temperature deposition.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evidence of the spin Seebeck effect in Ni-Zn ferrites polycrystalline slabs

  • Arboleda, J.D.
  • Arnache, O.
  • Aguirre, M.H.
  • Ramos, R.
  • Anadón, A.
  • Ibarra, M.R.
We report on the observation of the spin Seebeck effect in Ni-Zn ferrites slabs with different Zn concentration. All samples have a spinel structure confirmed by XRD and TEM. We fully characterize the magnetic properties by VSM and Mössbauer spectroscopy. Samples exhibit a nonmonotonic magnetization behavior depending on the structural inversion parameter, however we found a spin Seebeck response voltage of about 25.5 nV/K independent of the magnetization and the inversion degree.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlling the dominant magnetic relaxation mechanisms for magnetic hyperthermia in bimagnetic core-shell nanoparticles

  • Fabris, F.
  • Lima, E.Jr.
  • De Biasi, E.
  • Troiani, H.E.
  • Vásquez Mansilla, M.
  • Torres, T.E.
  • Fernández Pacheco, R.
  • Ibarra, M.R.
  • Goya, G.F.
  • Zysler, R.D.
  • Winkler, E.L.
We report a simple and effective way to control the heat generation of a magnetic colloid under alternate magnetic fields by changing the shell composition of bimagnetic core-shell Fe 3 O 4 /Zn x Co 1-x Fe 2 O 4 nanoparticles. The core-shell structure constitutes a magnetically-coupled biphase system, with an effective anisotropy that can be tuned by the substitution of Co 2+ by Zn 2+ ions in the shell. Magnetic hyperthermia experiments of nanoparticles dispersed in hexane and butter oil showed that the magnetic relaxation is dominated by Brown relaxation mechanism in samples with higher anisotropy (i.e., larger concentration of Co within the shell) yielding high specific power absorption values in low viscosity media as hexane. Increasing the Zn concentration of the shell, diminishes the magnetic anisotropy, which results in a change to a Néel relaxation that dominates the process when the nanoparticles are dispersed in a high-viscosity medium. We demonstrate that tuning the Zn contents at the shell of these exchange-coupled core/shell nanoparticles provides a way to control the magnetic anisotropy without loss of saturation magnetization. This ability is an essential prerequisite for most biomedical applications, where high viscosities and capturing mechanisms are present. This journal is
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Free-Radical Formation by the Peroxidase-Like Catalytic Activity of MFe2O4 (M = Fe, Ni, and Mn) Nanoparticles

  • Moreno Maldonado, Ana Carolina
  • Winkler, Elin L.
  • Raineri, Mariana
  • Toro Córdova, Alfonso
  • Rodríguez, Luis M.
  • Troiani, Horacio E.
  • Mojica Pisciotti, Mary Luz
  • Vasquez Mansilla, Marcelo
  • Tobia, Dina
  • Nadal, Marcela S.
  • Torres, Teobaldo E
  • De Biasi, Emilio
  • Ramos, Carlos A.
  • Goya, Gerardo F.
  • Zysler, Roberto D.
  • Lima, Enio
Ferrite magnetic nanoparticles (MNPs) have peroxidase-like activity and thus catalyze the decomposition of H2O2-producing reactive oxygen species (ROS). Increasingly important applications of these ferrite MNPs in biology and medicine require that their morphological, physicochemical, and magnetic properties need to be strictly controlled. Usually, the tuning of their magnetic properties is achieved by the replacement of Fe by other 3d metals, such as Mn or Ni. Here, we studied the catalytic activity of ferrite MNPs (MFe2O4, M = Fe2+/Fe3+, Ni, and Mn) with the mean diameter ranging from 10 to 12 nm. Peroxidase-like activity was studied by electron paramagnetic resonance (EPR) using the spin-trap 5, 5-dimethyl-1-pyrroline N-oxide at different pHs (4.8 and 7.4) and temperatures (25 and 40 °C). We identified an enhanced amount of hydroxyl (•OH) and perhydroxyl (•OOH) radicals for all samples, compared to a blank solution. Quantitative studies show that [•OH] is the dominant radical formed for Fe3O4, which is strongly reduced with the concomitant oxidation of Fe2+ or its substitution (Ni or Mn). A comparative analysis of the EPR data against in vitro production of ROS in microglial BV2 cell culture provided additional insights regarding the catalytic activity of ferrite MNPs, which should be considered if biomedical uses are intended. Our results contribute to a better understanding of the role played by different divalent ions in the catalytic activity of ferrite nanoparticles, which is very important because of their use in biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A concise review of nanomaterials for drug delivery and release

  • Toro-Córdova, Alfonso
  • Sanz, Beatriz
  • Goya, Gerardo F.
This review provides an updated vision about the recent developments in the field of drug vectorization using functional nanoparticles and other nanovectors. From a large number of these nanotechnology-based drug delivery systems that emerge nearly every week, only a tiny fraction reaches a pre-clinical or clinical phase study. In this report, we intend to provide contextual information about those nanocarriers and release methods that have shown the best outcomes at in vitro and in vivo experiments, highlighting those with proven therapeutic efficiency in humans. From silica-based porous nanoparticles to liposomes or polymeric nanoparticles, each one of these nanosystems has its advantages and drawbacks. We describe and discuss briefly those approaches that, in our criterion, have provided significant advancements over existing therapies at the in vivo level. This work also provides a general view of those commercially available nanovectors and their specific area of therapeutic action.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Observation of unexpected uniaxial magnetic anisotropy in La2/3Sr1/3MnO3 films by a BaTiO3 overlayer in an artificial multiferroic bilayer

  • Ordóñez, John E.
  • Marín, Lorena
  • Rodríguez, Luis A.
  • Algarabel, Pedro A.
  • Pardo, José A.
  • Guzmán, Roger
  • Morellón, Luis
  • Magén, César
  • Snoeck, Etienne
  • Gómez, María E.
  • Ibarra, Manuel R.
We studied in detail the in-plane magnetic properties of heterostructures based on a ferroelectric BaTiO3 overlayer deposited on a ferromagnetic La2/3Sr1/3MnO3 film grown epitaxially on pseudocubic (001)-oriented SrTiO3, (LaAlO3)0.3(Sr2TaAlO6)0.7 and LaAlO3 substrates. In this configuration, the combination of both functional perovskites constitutes an artificial multiferroic system with potential applications in spintronic devices based on the magnetoelectric effect. La2/3Sr1/3MnO3 single layers and BaTiO3/La2/3Sr1/3MnO3 bilayers using the pulsed-laser deposition technique. We analyzed the films structurally through X-ray reciprocal space maps and high-angle annular dark field microscopy, and magnetically via thermal demagnetization curves and in-plane magnetization versus applied magnetic field loops at room temperature. Our results indicate that the BaTiO3 layer induces an additional strain in the La2/3Sr1/3MnO3 layers close to their common interface. The presence of BaTiO3 on the surface of tensile-strained La2/3Sr1/3MnO3 films transforms the in-plane biaxial magnetic anisotropy present in the single layer into an in-plane uniaxial magnetic anisotropy. Our experimental evidence suggests that this change in the magnetic anisotropy only occurs in tensile-strained La2/3Sr1/3MnO3 film and is favored by an additional strain on the La2/3Sr1/3MnO3 layer promoted by the BaTiO3 film. These findings reveal an additional mechanism that alters the magnetic behavior of the ferromagnetic layer, and consequently, deserves further in-depth research to determine how it can modify the magnetoelectric coupling of this hybrid multiferroic system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Otros (Other)

Magnetic and Plasmonic Nanoparticles for Biomedical Devices

  • Ibarra, M.R.
  • Khlebtsov, N.G.
The design of magnetic, plasmonic, and hybrid nanoparticles is a rapidly growing multidisciplinary field that has found various promising biomedical applications, including bioimaging and focused thermal cancer therapy, targeted delivery of drugs, DNA and siRNA molecules, clinical analytics and chemical and biosensing, etc. In particular, magnetic and plasmonic nanoparticles have led to an emerging trend in nanomedicine, theranostics, which combines diagnosis and therapeutic modalities in a single hybrid nanostructure...
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Simple Sonochemical Method to Optimize the Heating Efficiency of Magnetic Nanoparticles for Magnetic Fluid Hyperthermia

  • Fuentes-García, J.A.
  • Carvalho Alavarse, A.
  • Moreno Maldonado, A.C.
  • Toro-Córdova, A.
  • Ibarra, M.R.
  • Goya, G.F.
We developed a fast, single-step sonochemical strategy for the green manufacturing of magnetite (Fe3O4) magnetic nanoparticles (MNPs), using iron sulfate (FeSO4) as the sole source of iron and sodium hydroxide (Na(OH)) as the reducing agent in an aqueous medium. The designed methodology reduces the environmental impact of toxic chemical compounds and minimizes the infrastructure requirements and reaction times down to minutes. The Na(OH) concentration has been varied to optimize the final size and magnetic properties of the MNPs and to minimize the amount of corrosive byproducts of the reaction. The change in the starting FeSO4concentration (from 5.4 to 43.1 mM) changed the particle sizes from (20 ± 3) to (58 ± 8) nm. These magnetite MNPs are promising for biomedical applications due to their negative surface charge, good heating properties (˜324 ± 2 W/g), and low cytotoxic effects. These results indicate the potential of this controlled, easy, and rapid ultrasonic irradiation method to prepare nanomaterials with enhanced properties and good potential for use as magnetic hyperthermia agents.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fundamental solutions for semidiscrete evolution equations via Banach algebras

  • González-Camus, J.
  • Lizama, C.
  • Miana, P.J.
We give representations for solutions of time-fractional differential equations that involve operators on Lebesgue spaces of sequences defined by discrete convolutions involving kernels through the discrete Fourier transform. We consider finite difference operators of first and second orders, which are generators of uniformly continuous semigroups and cosine functions. We present the linear and algebraic structures (in particular, factorization properties) and their norms and spectra in the Lebesgue space of summable sequences. We identify fractional powers of these generators and apply to them the subordination principle. We also give some applications and consequences of our results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Operator inequalities, functional models and ergodicity

  • Abadias, L.
  • Bello, G.
  • Yakubovich, D.
We discuss when an operator T, subject to a rather general inequality in hereditary form, admits a unitarily equivalent functional model of Agler type in the reproducing kernel Hilbert space associated to the inequality. The kernel need not be of Nevanlinna-Pick type. We define a defect operator D in our context and discuss the structure of the spectrum of T when D is of finite rank. As a second application, some consequences concerning the ergodic behavior of the operator T are derived.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

(w, c)-periodic mild solutions to non-autonomous abstract differential equations

  • Abadias, L.
  • Alvarez, Edgardo
  • Grau, Rogelio
We investigate the semi-linear, non-autonomous, first-order abstract differential equation x′(t)=A(t)x(t)+f(t,x(t),φ[α(t,x(t))]),t∈R. We obtain results on existence and uniqueness of (ω,c)-periodic (second-kind periodic) mild solutions, assuming that A(t) satisfies the so-called Acquistapace–Terreni conditions and the homogeneous associated problem has an integrable dichotomy. A new composition theorem and further regularity theorems are given.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantification of the interfacial and bulk contributions to the longitudinal spin Seebeck effect

  • Jiménez-Cavero, P.
  • Lucas, I.
  • Bugallo, D.
  • López-Bueno, C.
  • Ramos, R.
  • Algarabel, P.A.
  • Ibarra, M.R.
  • Rivadulla, F.
  • Morellón, L.
We report the disentanglement of bulk and interfacial contributions to the thermally excited magnon spin current in the spin Seebeck effect under static heating. For this purpose, we have studied the dependence of the inverse spin Hall voltage and the thermal conductivity on the magnetic layer thickness. Knowledge of these quantities allows us to take into account the influence of both sources of thermal spin current in the analysis of the voltage dependence. The magnetic layer thickness modulates the relative magnitude of the involved thermal drops for a fixed total thermal difference throughout the sample. In the end, we attain the separate contributions of both sources of thermal spin current - bulk and interfacial - and obtain the value of the thermal magnon accumulation length scale in maghemite, which we find to be 29(1) nm. According to our results, bulk magnon accumulation dominates the spin Seebeck effect in our studied range of thicknesses, but the interfacial component is by no means negligible.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic hyperthermia experiments with magnetic nanoparticles in clarified butter oil and paraffin: A thermodynamic analysis

  • de Almeida, A.A.
  • de Biasi, E.
  • Mansilla, M.V.
  • Valdes, D.P.
  • Troiani, H.E.
  • Urretavizcaya, G.
  • Torres, T.E.
  • Rodríguez, L.M.
  • Fregenal, D.E.
  • Bernardi, G.C.
  • Winkler, E.L.
  • Goya, G.F.
  • Zysler, R.D.
  • Lima, E.Jr.
In specific power absorption models for magnetic fluid hyperthermia (MFH) experiments, the magnetic relaxation time of nanoparticles (NPs) is known to be a fundamental descriptor of the heating mechanisms. The relaxation time is mainly determined by the interplay between the magnetic properties of NPs and the rheological properties of NPs’ environment. Although the role of magnetism in MFH has been extensively studied, the thermal properties of the NP medium and their changes during MFH experiments have been underrated so far. Herein, we show that ZnxFe3-xO4 NPs dispersed through different media with phase transition in the temperature range of experiment as clarified butter oil (CBO) and paraffin. These systems show nonlinear behavior of the heating rate within the temperature range of MFH experiments. For CBO, a fast increase at ~306 K is associated with changes in the viscosity (¿(T)) and specific heat (cp(T)) of the medium at its melting temperature. This increment in the heating rate takes place around 318 K for paraffin. The magnetic and morphological characterization of NPs together with the observed agglomeration of NPs above 306 and 318 K for CBO and paraffin, respectively, indicate that the fast increase in MFH curves could not be associated with the change in the magnetic relaxation mechanism, with Neél relaxation being dominant. In fact, successive experimental runs performed up to temperatures below and above the CBO and paraffin melting points resulted in different MFH curves due to agglomeration of NPs driven by magnetic field inhomogeneity during the experiments. Our results highlight the relevance of the thermodynamic properties of the system NP-medium for an accurate measurement of the heating efficiency for in vitro and in vivo environments, where the thermal properties are largely variable within the temperature window of MFH experiments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantum Walks: Schur Functions Meet Symmetry Protected Topological Phases

  • Cedzich C.
  • Geib T.
  • Grünbaum F.A.
  • Velázquez Campoy, L. F.
  • Werner A.H.
  • Werner R.F.
This paper uncovers and exploits a link between a central object in harmonic analysis, the so-called Schur functions, and the very hot topic of symmetry protected topological phases of quantum matter. This connection is found in the setting of quantum walks, i.e. quantum analogs of classical random walks. We prove that topological indices classifying symmetry protected topological phases of quantum walks are encoded by matrix Schur functions built out of the walk. This main result of the paper reduces the calculation of these topological indices to a linear algebra problem: calculating symmetry indices of finite-dimensional unitaries obtained by evaluating such matrix Schur functions at the symmetry protected points ± 1. The Schur representation fully covers the complete set of symmetry indices for 1D quantum walks with a group of symmetries realizing any of the symmetry types of the tenfold way. The main advantage of the Schur approach is its validity in the absence of translation invariance, which allows us to go beyond standard Fourier methods, leading to the complete classification of non-translation invariant phases for typical examples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Subordination principle, Wright functions and large-time behavior for the discrete in time fractional diffusion equation

  • Abadías Ullod, Luciano
  • Álvarez, Edgardo
  • Díaz, Stiven
The main goal in this paper is to study asymptotic behavior in for the solutions of the fractional version of the discrete in time N-dimensional diffusion equation, which involves the Caputo fractional h-difference operator. The techniques to prove the results are based in new subordination formulas involving the discrete in time Gaussian kernel, and which are defined via an analogue in discrete time setting of the scaled Wright functions. Moreover, we get an equivalent representation of that subordination formula by Fox H-functions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the properties of zeros of Bessel series in the real line

  • Durán, A.J.
  • Pérez, M.
  • Varona, J.L.
For a given sequence of real numbers (Formula presented.), we define the function (Formula presented.) where (Formula presented.), (Formula presented.) denotes the Bessel function of order µ, and (Formula presented.) are the positive zeros of  (Formula presented.). In this paper, we study the function (Formula presented.) and some outstanding instances of it on the whole real line and propose a number of conjectures about its positive zeros.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Occupation Time for Classical and Quantum Walks

  • Grünbaum, F. A.
  • Velázquez, L.
  • Wilkening, J.
This is a personal tribute to Lance Littlejohn on the occasion of his 70th birthday. It is meant as a present to him for many years of friendship. It is not written in the “Satz-Beweis” style of Edmund Landau or even in the format of a standard mathematics paper. It is rather an invitation to a fairly new, largely unexplored, topic in the hope that Lance will read it some afternoon and enjoy it. If he cares about complete proofs he will have to wait a bit longer; we almost have them but not in time for this volume. We hope that the figures will convince him and other readers that the phenomena displayed here are interesting enough.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vanadium trapped by oblique nano-sheets to preserve the anisotropy in Co–V thin films at high temperature

  • Favieres, C.
  • Vergara, J.
  • Magén, C.
  • Ibarra, M.R.
  • Madurga, V.
In this study, oriented nano-sheets generated during the growth of cobalt-rich Co–V and Co–Zn thin films induced a large anisotropy in the magnetic and transport properties. The regular nano-sheets were tilted 52–54 deg. with respect to the substrate plane, ˜ 3.0–4.0 nm thick, ˜ 30–100 nm wide, and ˜ 200–300 nm long, with an inter-sheet distance of ˜ 0.9–1.2 nm. In spite of the different microstructures of the two kinds of samples where the Co–V films were amorphous, whereas the Co–Zn films showed a growth of Zn nanocrystals, the oblique nano-sheet morphology conferred noticeable shape anisotropy to both specimens. This anisotropy resulted in an in-plane uniaxial magnetic anisotropy. The changes in the nano-morphology caused by thermal treatments, and hence in their anisotropic properties, were studied. While the Co–V samples retained or increased their magnetic and transport anisotropies, this anisotropic behavior vanished for the annealed Co–Zn films. High resolution transmission electron microscopy, HRTEM, including chemical analysis at the nano-scale, and the dependence of the anisotropic resistance on temperature allowed to establish the nature and the activation energy spectra of the atomic relaxation processes during heating. These processes displayed a single peak at 1.63 eV for the Co–V and two peaks at 1.67 and 2.0 eV for the Co–Zn. These spectra and their singularities were associated to the changes induced in the nano-morphology of the films by thermal treatments. The Co–V films retained their nano-sheet morphology almost up to 500 ºC; the Co–Zn films lost their nano-sheets at 290 ºC. The thermal stability exhibited by the Co–V films makes them useful for applications in ultra high frequency, optical, magnetostrictive and magneto-electric devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Wall Polynomials on the Real Line: a classical approach to OPRL Khrushchev’s formula

  • Cantero, M. J.
  • Moral, L.
  • Velázquez, L.
The standard proof of Khrushchev’s formula for orthogonal polynomials on the unit circle given in Khrushchev (J Approx Theory 108:161–248, 2001, J Approx Theory 116:268–342, 2002) combines ideas from continued fractions and complex analysis, depending heavily on the theory of Wall polynomials. Using operator theoretic tools instead, Khrushchev’s formula has been recently extended to the setting of orthogonal polynomials on the real line in the determinate case (Grünbaum and Velázquez in Adv Math 326:352–464, 2018). This paper develops a theory of Wall polynomials on the real line, which serves as a means to prove Khrushchev’s formula for any sequence of orthogonal polynomials on the real line. This real line version of Khrushchev’s formula is used to rederive the characterization given in Simon (J Approx Theory 126:198–217, 2004) for the weak convergence of pn2dµ, where pn are the orthonormal polynomials with respect to a measure µ supported on a bounded subset of the real line (Theorem 8.1). The generality and simplicity of such a Khrushchev’s formula also permits the analysis of the unbounded case. Among other results, we use this tool to prove that no measure µ supported on an unbounded subset of the real line yields a weakly convergent sequence pn2dµ (Corollary 8.10), but there exist instances such that pn2dµ becomes vaguely convergent (Example 8.5 and Theorem 8.6). Some other asymptoptic results related to the convergence of pn2dµ in the unbounded case are obtained via Khrushchev’s formula (Theorems 8.3, 8.7, 8.8, Proposition 8.4, Corollary 8.9). In the bounded case, we include a simple diagrammatic proof of Khrushchev’s formula on the real line which sheds light on its graph theoretical meaning, linked to Pólya’s recurrence theory for classical random walks. © 2022, The Author(s).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Discrete Hölder spaces and their characterization via semigroups associated with the discrete Laplacian and kernel estimates

  • Abadias, Luciano
  • De León-Contreras, Marta
In this paper, we characterize the discrete Hölder spaces by means of the heat and Poisson semigroups associated with the discrete Laplacian. These characterizations allow us to get regularity properties of fractional powers of the discrete Laplacian and the Bessel potentials along these spaces and also in the discrete Zygmund spaces in a more direct way than using the pointwise definition of the spaces. To obtain our results, it has been crucial to get boundedness properties of the heat and Poisson kernels and their derivatives in both space and time variables. We believe that these estimates are also of independent interest.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Large time behaviour for the heat equation on Z, moments and decay rates

  • Abadias, Luciano
  • González-Camus, J.
  • Miana, Pedro José
  • Pozo, J.C.
The paper is devoted to understand the large time behaviour and decay of the solution of the discrete heat equation in the one dimensional mesh Z on lp spaces, and its analogies with the continuous-space case. We do a deep study of the moments of the discrete gaussian kernel (which is given in terms of Bessel functions), in particular the mass conservation principle; that is reflected on the large time behaviour of solutions. We prove asymptotic pointwise and lp decay results for the fundamental solution. We use that estimates to get rates on the lp decay and large time behaviour of solutions. For the l2 case, we get optimal decay by use of Fourier techniques.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fractional Cauchy problem with memory effects

  • Abadias, L.
  • Alvarez, E.
We give an original representation integral formula for the resolvent families associated to the fractional Cauchy equation with memory effects (Formula presented.) where (Formula presented.) and A is a sectorial operator on a Banach space X. Moreover, we get spatial bounds for the resolvent families in order to study global or blow up mild solutions when the nonlinearity f satisfies a locally Lipschitz condition. The case of critical nonlinearities is also treated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fractional-order susceptible-infected model: definition and applications to the study of covid-19 main protease

  • Abadias, L
  • Estrada-Rodriguez, G
  • Estrada, E
We propose a model for the transmission of perturbations across the amino acids of a protein represented as an interaction network. The dynamics consists of a Susceptible-Infected (SI) model based on the Caputo fractional-order derivative. We find an upper bound to the analytical solution of this model which represents the worse-case scenario on the propagation of perturbations across a protein residue network. This upper bound is expressed in terms of Mittag-Leffler functions of the adjacency matrix of the network of inter-amino acids interactions. We then apply this model to the analysis of the propagation of perturbations produced by inhibitors of the main protease of SARS CoV-2. We find that the perturbations produced by strong inhibitors of the protease are propagated far away from the binding site, confirming the long-range nature of intra-protein communication. On the contrary, the weakest inhibitors only transmit their perturbations across a close environment around the binding site. These findings may help to the design of drug candidates against this new coronavirus.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hilbertian Hardy-Sobolev spaces on a half-plane

  • Galé, José E.
  • Matache, Valentin
  • Miana, Pedro J.
  • Sánchez-Lajusticia, Luis
In this paper we deal with a scale of reproducing kernel Hilbert spaces H2 (n), n=0, which are linear subspaces of the classical Hilbertian Hardy space on the right-hand half-plane C+. They are obtained as ranges of the Laplace transform in extended versions of the Paley-Wiener theorem which involve absolutely continuous functions of higher degree. An explicit integral formula is given for the reproducing kernel Kz, n of H2 (n), from which we can find the estimate ¿Kz, n¿~|z|-1/2 for z¿C+. Then composition operators Cf:H2 (n)¿H2 (n), Cff=f°f, on these spaces are discussed, giving some necessary and some sufficient conditions for analytic maps f:C+¿C+ to induce bounded composition operators.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Functional models up to similarity and a-contractions

  • Abadias, L.
  • Bello, G.
  • Yakubovich, D.
We study the generalization of m-isometries and m-contractions (for positive integers m) to what we call a-isometries and a-contractions for positive real numbers a. We show that an operator satisfying a certain inequality in hereditary form is similar to a-contraction. This improvement of [9, Theorem I] is based on some Banach algebras techniques. We show that our operator classes are closely connected with fractional finite differences. Using this techniques, we get that, given 0 < b< a, an a-contraction need not to be a b-contraction in general, but is a b-contraction if a natural additional requirement is imposed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Poisson equation and discrete one-sided Hilbert transform for (c,a)-bounded operators

  • Abadias, L.
  • Galé, J. E.
  • Lizama, C.
We characterize the solutions of the Poisson equation and the domain of its associated one-sided Hilbert transform for (C, α)-bounded operators, α > 0. This extends known results for power bounded operators to the setting of Cesàro bounded operators of fractional order, thus generalizing the results substantially. In passing, we obtain a generalization of the mean ergodic theorem in our framework. Examples are given to illustrate the theory.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Time-step heat problem on the mesh: asymptotic behaviour and decay rates

  • Abadías Ullod, Luciano
  • González-Camus, Jorge
  • Rueda, Silvia
In this article, we study the asymptotic behavior and decay of the solution of the fully discrete heat problem. We show basic properties of its solutions, such as the mass conservation principle and their moments, and we compare them to the known ones for the continuous analogue problems. We present the fundamental solution, which is given in terms of spherical harmonics, and we state pointwise and ℓp estimates for that. Such considerations allow to prove decay and large-time behavior results for the solutions of the fully discrete heat problem, giving the corresponding rates of convergence on ℓp spaces.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Weighted hyperbolic composition groups on the disc and subordinated integral operators

  • Abadias, Luciano
  • Galé, José E.
  • Miana, Pedro J.
  • Oliva-Maza, Jesús
We provide the spectral picture of groups of weighted composition operators, induced by the hyperbolic group of automorphisms of the unit disc, acting on holomorphic functions. Some questions about the spectrum of single weighted hyperbolic composition operators are discussed, and results related with them in the literature are completed or partly extended. Also, our results on the weighted hyperbolic group are applied to the spectral study of two families of multiparameter weighted averaging operators, which generalize both Siskakis' operator and the reduced Hilbert matrix operator.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effects of pressure on the magnetic-structural and griffiths-like transitions in Dy5Si3Ge

  • Marcano, Aguado, Noelia
  • Algarabel Lafuente, Pedro Antonio
  • Rodríguez-Fernández, Jesús
  • Magén, César
  • Morellón, Luis
  • Singh Niraj, K.
  • Schlagel, D.L
  • Gschneidner Jr., K.A.
  • Pecharsky, V. K.
  • Ibarra, Manuel Ricardo
Magnetization studies have been performed on a polycrystalline sample of Dy5Si3Ge as a function of an applied magnetic field (up to 50 kOe) and hydrostatic pressure (up to 10 kbar) in the 5–300 K temperature range. The anomalous behavior of the magnetic susceptibility indicates that a Griffiths-like phase exists at low magnetic fields and pressures up to 10 kbar. We present evidence that the high-temperature second-order ferromagnetic transition can be coupled with the low-temperature first-order crystallographic transformation into a single first-order magnetic-crystallographic transformation using a magnetic field and hydrostatic pressure as tuning parameters. The effect of pressure on the Griffiths-like phase is reported and analyzed in the framework of the complex competition between the interslab and intraslab magnetic interactions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetism and magnetocaloric effect of single-crystal Er 5Si 4 under pressure

  • Marcano, N.
  • Algarabel, P. A.
  • Fernández, J. R.
  • Magén, C.
  • Morellón, L.
  • Singh, N. K.
  • Schlagel, D. L.
  • Gschneidner, K. A.
  • Pecharsky, V. K.
  • Ibarra, M. R.
Magnetic and magnetocaloric properties of single-crystalline Er5Si4 have been investigated as a function of the applied magnetic field (up to 50 kOe) and the hydrostatic pressure (up to 10 kbar) in the 5–300 K temperature range along the three main crystallographic directions. The magnetization isotherms show a highly anisotropic behavior with the easy-magnetization direction along the axis for the low-pressure monoclinic and high-pressure orthorhombic structures, in good agreement with previous neutron scattering experiments. Below , the approach to the saturation shows a steplike behavior when the magnetic field is applied along the hard directions. The steps are sharper as the pressure increases. At constant magnetic field change, increasing the pressure induces a highly anisotropic enhancement of the magnetic entropy change. An enhancement of 20% is observed along the easy axis , where the magnetic entropy change is maximum. The different evolution of the magnitude and temperature dependence of the magnetocaloric effect along the three crystallographic directions with pressure is discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the hyperbolic group and subordinated integrals as operators on sequence Banach spaces

  • Abadias, L.
  • Galé, J. E.
  • Miana, P. J.
  • Oliva-Maza, J.
We show that the composition hyperbolic group in the unit disc, once transferred to act on sequence spaces, is bounded on l<sup>p</sup> if and only if p = 2. We introduce some integral operators subordinated to that group which are natural generalizations of classical operators on sequences. For the description of such operators, we use some combinatorial identities which look interesting in their own.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Further inequalities for the (generalized) Wills functional

  • Alonso-Gutiérrez, David
  • Hernández Cifre, María A.
  • Yepes Nicolás, Jesús
The Wills functional (K) of a convex body K, defined as the sum of its intrinsic volumes Vi(K), turns out to have many interesting applications and properties. In this paper, we make profit of the fact that it can be represented as the integral of a log-concave function, which, furthermore, is the Asplund product of other two log-concave functions, and obtain new properties of the Wills functional (indeed, we will work in a more general setting). Among others, we get upper bounds for (K) in terms of the volume of K, as well as Brunn-Minkowski and Rogers-Shephard-type inequalities for this functional. We also show that the cube of edge-length 2 maximizes (K) among all 0-symmetric convex bodies in John position, and we reprove the well-known McMullen''s inequality (K) = eV1(K) using a different approach.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strong crystallographic influence on spin hall mechanism in pld-grown iro2 thin films

  • Jiménez-Cavero P.
  • Lucas I.
  • Ara-Arteaga J.
  • Ibarra M.R.
  • Algarabel P.A.
  • Morellón L.
Spin-to-charge conversion is a central process in the emerging field of spintronics. One of its main applications is the electrical detection of spin currents, and for this, the inverse spin Hall effect (ISHE) has become one of the preferred methods. We studied the thickness dependence of the ISHE in iridium oxide (IrO2 ) thin films, producing spin currents by means of the spin Seebeck effect in ¿-Fe2 O3 /IrO2 bilayers prepared by pulsed laser deposition (PLD). The observed ISHE charge current density, which features a maximum as a consequence of the spin diffusion length scale, follows the typical behaviour of spin-Hall-related phenomena. By fitting to the theory developed by Castel et al., we find that the spin Hall angle ¿SH scales proportionally to the thin film resistivity, ¿SH ¿ ¿c, and obtains a value for the spin diffusion length ¿IrO2 of ¿IrO2 = 3.3(7) nm. In addition, we observe a negative ¿SH for every studied thickness and temperature, unlike previously reported works, which brings the possibility of tuning the desired functionality of high-resistance spin-Hall-based devices. We attribute this behaviour to the textured growth of the sample in the context of a highly anisotropic value of the spin Hall conductivity in this material. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A CMV connection between orthogonal polynomials on the unit circle and the real line

  • Cantero, M.J.
  • Marcellán, F.
  • Moral, L.
  • Velázquez, L.
M. Derevyagin, L. Vinet and A. Zhedanov introduced in Derevyagin et al. (2012) a new connection between orthogonal polynomials on the unit circle and the real line. It maps any real CMV matrix into a Jacobi one depending on a real parameter ¿. In Derevyagin et al. (2012) the authors prove that this map yields a natural link between the Jacobi polynomials on the unit circle and the little and big -1 Jacobi polynomials on the real line. They also provide explicit expressions for the measure and orthogonal polynomials associated with the Jacobi matrix in terms of those related to the CMV matrix, but only for the value ¿=1 which simplifies the connection –basic DVZ connection–. However, similar explicit expressions for an arbitrary value of ¿ –(general) DVZ connection– are missing in Derevyagin et al. (2012). This is the main problem overcome in this paper. This work introduces a new approach to the DVZ connection which formulates it as a two-dimensional eigenproblem by using known properties of CMV matrices. This allows us to go further than Derevyagin et al. (2012), providing explicit relations between the measures and orthogonal polynomials for the general DVZ connection. It turns out that this connection maps a measure on the unit circle into a rational perturbation of an even measure supported on two symmetric intervals of the real line, which reduce to a single interval for the basic DVZ connection, while the perturbation becomes a degree one polynomial. Some instances of the DVZ connection are shown to give new one-parameter families of orthogonal polynomials on the real line.