Pasar al contenido principal

DESARROLLO DE METODOS DE SINTESIS CONTINUOS Y EFICIENTES PARA LA PRODUCCION DE NANOPARTICULAS USADAS EN BIOMEDICINA.

MAT2011-24988

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Efficient and facile tuning of Vulcan XC72 with ultra-small Pt nanoparticles for electrocatalytic applications

  • Eguizabal, Adela
  • Usón, Laura
  • Sebastián, Víctor
  • Hueso, José L.
  • Pina, M. Pilar
In this work, we report the synergic combination of tiny, reproducible, and crystalline platinum nanoparticles with functionalized Vulcan XC72 support for the preparation of efficient electrocatalysts. The morphology and crystallinity of Pt NPs, the amination of carbon support and the Pt loading have been properly evaluated by TEM, STEM, ATR-FTIR, XPS and microwave plasma-atomic emission spectrometry MP-AES. The electrochemical performance of the as prepared powders has been evaluated and compared with the exhibited by commercial Pt-ETEK catalyst with similar Pt-loadings, i.e. 20% wt. The herein described electrocatalyst shows higher dispersion (98.2 m2 gPt-1) of Pt nanoparticles (1.5 ± 0.3 nm in size) and strong metal–support interaction than commercial Pt-ETEK counterpart, highlighting the elevated mass activity for methanol electrooxidation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magneto-plasmonic nanoparticles as theranostic platforms for magnetic resonance imaging, drug delivery and NIR hyperthermia applications

  • Urries, I.
  • Muñoz, C.
  • Gomez, L.
  • Marquina, C.
  • Sebastian, V.
  • Arruebo, M.
  • Santamaria, J.
PEGylated magneto-plasmonic nanoparticles with a hollow or semi-hollow interior have been successfully synthesized and their physico-chemical characteristics have been investigated. The hollow interior space can be used to store drugs or other molecules of interest whereas magnetic characterization shows their potential as contrast agents in magnetic resonance imaging (MRI) applications. In addition, their plasmonic characteristics in the near infrared (NIR) region make them efficient in photothermal applications producing high temperature gradients after short irradiation times. We show that by controlling the etching conditions the inner silica shell can be selectively dissolved to achieve a hollow or semi-hollow interior without compromising the magnetic or plasmonic characteristics of the resulting nanoparticles. Magnetic measurements and transmission electron microscopy observations have been used to demonstrate the precise control during the etching process and to select an optimal concentration of the etching reagent and contact time to preserve the inner superparamagnetic iron oxide-based nanoparticles and the plasmonic properties of the constructs. Drug loading capabilities were also evaluated for both semi-hollow and as-synthesized nanoparticles using Rhodamine B isothiocyanate as a model compound. The nanoparticles produced could be potentially used as “theranostic” nanoparticles with both imaging capabilities and a dual therapeutic function (drug delivery and hyperthermia).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

In-situ preparation of ultra-small Pt nanoparticles within rod-shaped mesoporous silica particles: 3-D tomography and catalytic oxidation of n-hexane

  • Uson, Laura
  • Hueso, José L.
  • Sebastian, Víctor
  • Arenal, Raul
  • Florea, Ileana
  • Irusta, Silvia
  • Arruebo, Manuel
  • Santamaria, Jesús
The shape and porous configuration of supports are key parameters to design outstanding catalysts. However, the selection of a proper mesoporous support, such as SBA-15, by itself does not guarantee accessibility to catalytic sites. The distribution of the active phase and its stability are strongly related to the procedure used to deposit it on the catalytic substrate. Herein, we have prepared rod-shaped SBA-15 silica supports functionalized with amine groups to facilitate the electrostatic attraction and a good distribution of the resulting Pt-based catalytic nanoparticles along the pore walls. Additionally, the use of tetrakis-(hydroxymethyl)-phosphonium chloride (THPC) as both reductant and stabilizer is presented as a novel alternative for Pt nanoparticle synthesis. The behaviour of this catalyst in the total oxidation of n-hexane demonstrates high activity and excellent stability after 70 h on reaction stream. STEM-HAADF and 3-D tomography were used to confirm the presence of the metallic nanoparticles within the mesochannels and to corroborate their reduced sintering after reaction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

VOCs abatement using thick eggshell Pt/SBA-15 pellets with hierarchical porosity

  • Usón, Laura
  • Colmenares, María Gracia
  • Hueso, José L.
  • Sebastián, Víctor
  • Balas, Francisco
  • Arruebo, Manuel
  • Santamaría, Jesús
Mechanically stable 3-D pellets made of mesoporous SBA-15 silica fibers containing highly dispersedplatinum nanoparticles have been successfully synthesized with the aid of a sacrificial polyacrylamidenetwork using a gel-casting deposition technique. The pellets exhibit a hierarchical porosity, with spacesof 3 microns among the silica fibers, and a core–shell distribution of Pt, with an outer Pt-rich layer of 450microns accounting for over 73% of the Pt. Both factors (hierarchical structure and concentration of thecatalyst on the outer pellet surface) facilitated reactant access to the catalyst centers, and as a consequencean excellent catalytic activity toward the total oxidation of n-hexane, used as a VOC model. There was nomeasurable loss of activity after 70 h on stream and the subsequent examination of the catalyst revealedthat interparticle coalescence of Pt nanoparticles was largely prevented due to the encapsulation of thenoble-metal particles within the silica mesochannels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluation of gold-decorated halloysite nanotubes as plasmonic photocatalysts

  • Gómez, Leyre
  • Hueso, José L
  • Ortega-Liébana, M. Carmen
  • Santamaría, Jesús
  • Cronin, Stephen B.
Herein we report on the synthesis of gold-decorated halloysite nanotubes (HNTs) and their evaluation as photocatalysts in the degradation of a model organic contaminant. The combination of photo-thermally-induced local heating and charge transfer mechanisms between the nanostructured gold surface and the organic molecule results in the observed dye decomposition. The use of an inexpensive natural clay support with suitable surface chemistry and adsorption properties represents an eco-friendly method for light-induced oxidation reactions carried out at ambient temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gold-coated halloysite nanotubes as tunable plasmonic platforms

  • Zieba, Maciej
  • Hueso, José L.
  • Arruebo, Manuel
  • Martínez, Gema
  • Santamaría, Jesús
We propose the use of natural Halloysite Hollow Nanotubes (HNTs) as supports to generate plasmonic platforms with remotely triggered heating capacity. The chemical modification and subsequent coating with nanostructured gold either in the form of individually dispersed particles or by forming a shell with variable thickness and interconnectivity has been studied. The dielectric nature of the silica in conjunction with the plasmonic gold layer allows a flexible optical response with tunable maximum absorptions within the visible to Near-Infrared (NIR) range. The generation of hollow gold nanotubes using halloysite as a sacrificial template is also demonstrated.