Pasar al contenido principal

DESARROLLOS FUNDAMENTALES EN LA SIMULACION Y CARACTERIZACION DE PROCESOS DINAMICOS FUERA DEL EQUILIBRIO EN SISTEMAS MOLECULARES: MATERIALES PARA APLICACIONES ENERGETICAS

FIS2013-46159-C3-3-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 65
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D

  • Liu, Lichen
  • Arenal, Raul
  • Agostini, Giovanni
  • Díaz, Urbano|||0000-0003-1472-8724
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 degrees C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene., This work was funded by the Spanish Government (Consolider Ingenio 2010-MULTICAT (CSD2009-00050) and MAT2014-52085-C2-1-P) and by the Generalitat Valenciana (Prometeo). The Severo Ochoa Program (SEV-2012-0267) is gratefully acknowledged. L.L. thanks ITQ for a contract. The authors also thank the Microscopy Service of UPV for the TEM and STEM measurements. The HAADF-HRSTEM works were conducted in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA)-Universidad de Zaragoza (Spain), a Spanish ICTS National Facility. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. also acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and the European Union Horizon 2020 research and innovation programme under the Marie Sldodowska-Curie grant agreement No. 642742.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous-mode laser ablation at the solid-liquid interface of pelletized low-cost materials for the production of luminescent silicon carbide nanocrystals

  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Arenal, Raúl
  • Lahoz, Ruth
  • Fuente, Germán F. de la
  • Santamaría, Jesús
We report on the fabrication of silicon carbide (SiC) nanocrystals using a continuous scanning mode laser for the ablation of pelletized SiC microparticles. As a major advantage, we propose the in situ generation and collection of freestanding nanoparticles in an ethanol liquid medium and the use of cost-effective SiC targets in comparison with those commercially available or synthesized after multiple steps. The SiC NPs exhibit luminescent properties under UV exposure and excellent colloidal stability for extended periods of time. The influence of a more oxidizing solvent such as water is also evaluated as the collecting medium., The research leading to these results has received funding from the People Program (under Marie Curie Grant 294094-NANOLIGHT). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Comission under Graphene Flagship (contract no. CNECT-ICT-604391) and under Grant 312483 - ESTEEM2 (Integrated Infrastructure Initiative - I3). Additional funding from 314630 - UV Marking (FoF) and DGA (Laser Applications Lab, T87) is also gratefully acknowledged. J.L.H. is thankful for a Juan de la Cierva Postdoctoral Fellowship from the Spanish Ministry of Science and Education., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical conductivity of oxidized-graphenic nanoplatelets obtained from bamboo: effect of the oxygen content

  • Gross, K.
  • Sangiao, S.
  • Teresa, José María de
  • Arenal, Raúl
  • Prieto, Pilar
The large-scale production of graphene and reduced-graphene oxide (rGO) requires low-cost and eco-friendly synthesis methods. We employed a new, simple, cost-effective pyrolytic method to synthetize oxidized-graphenic nanoplatelets (OGNP) using bamboo pyroligneous acid (BPA) as a source. Thorough analyses via high-resolution transmission electron microscopy and electron energy-loss spectroscopy provides a complete structural and chemical description at the local scale of these samples. In particular, we found that at the highest carbonization temperature the OGNP-BPA are mainly in a sp bonding configuration (sp fraction of 87%). To determine the electrical properties of single nanoplatelets, these were contacted by Pt nanowires deposited through focused-ion-beam-induced deposition techniques. Increased conductivity by two orders of magnitude is observed as oxygen content decreases from 17% to 5%, reaching a value of 2.3 10 S m at the lowest oxygen content. Temperature-dependent conductivity reveals a semiconductor transport behavior, described by the Mott three-dimensional variable range hopping mechanism. From the localization length, we estimate a band-gap value of 0.22(2) eV for an oxygen content of 5%. This investigation demonstrates the great potential of the OGNP-BPA for technological applications, given that their structural and electrical behavior is similar to the highly reduced rGO sheets obtained by more sophisticated conventional synthesis methods., This work was supported by funds for internal calls for projects at Universidad del Valle CI71024, the Interdisciplinary Institute of Sciences at Universidad del Quindio and the Center of Excellence on Novel Materials at Universidad del Valle. Some of the research leading to these results received funding from the European Union Seventh Framework Program under Grant Agreement 312483—ESTEEM2 (Integrated Infrastructure Initiative—I3) and under Grant Agreement 604391 Graphene Flagship. RA also acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P), as well as from EU H2020 ETN project ‘Enabling Excellence’ Grant Agreement 642742. Acknowledgment to Aragon regional government for funding the E26 group is given., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene oxide-carbon nanotube hybrid assemblies: Cooperatively strengthened OH···O=C hydrogen bonds and removal of chemisorbed water

  • Núñez, Jesús David
  • Benito, Ana M.
  • Rouzière, Stéphan
  • Launois, Pascale
  • Arenal, Raúl
  • Ajayan, Pulickel M.
  • Maser, Wolfgang K.
6 Figuras, Owing to their great interest for energy storage and sensing applications, multi-layer papers consisting of graphene oxide – carbon nanotube (GO-CNT) hybrid sheets were prepared by in-situ exfoliation of graphite oxide in the presence of oxidized CNTs (oCNTs). For the first time we elucidate the influence of oCNTs on chemisorbed water (CW), i.e. water molecules inherently bound to oxygen functional groups (OFGs) of graphene oxide (GO) and responsible for irreversible structural damage upon thermal reduction processes. We show that oCNTs self-assemble onto GO sheets during the liquid phase processing steps by forming cooperatively strengthened OH···O=C hydrogen bonds between the carboxylic groups of oCNTs and OFGs of GO. At oCNT contents of about 10 to 15 wt. % this leads to the displacement of considerable amounts of CW without altering the original chemical composition of GO. Thermally reduced GO-CNT (rGO-CNT) papers reveal improved sp2 character and an enhancement of the specific capacitance by 75% with respect to thermally reduced GO (rGO), largely due to the effective removal of CW by oxidized CNTs. These findings disclose the relevance of cooperative hydrogen bonding phenomena in graphene oxide paper/film electrodes for the development of improved electrochemical energy storage and sensing devices., JDN is thankful for his CSIC PhD grant JAEPre09-01155 covering also his research stay at Rice University. WKM and AMB acknowledge financial support from Spanish MINECO and the European Regional Development Fund through project grants ENE2013-48816-C5-5-R, ENE2016-79282-C5-1-R and the Government of Aragon and the European Social Fund under project DGA-FSE-T66 CNN. RA gratefully acknowledges the support from MINECO through project grants FIS2013-46159- C3-3-P and MAT2016-79776-P. Some of the research has received funding from the European Union FP7 program under Grant Agreement 312483 ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the European Union H2020 program under the grant 696656 Graphene Flagship, and H2020 Marie Skłodowska-Curie grant 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D visualization of the iron oxidation state in FeO/Fe3O4 core-shell nanocubes from electron energy loss tomography

  • Torruella, Pau
  • Arenal, Raúl
  • Peña, Francisco de la
  • Saghi, Zineb
  • Yedra, Lluís
  • Eljarrat, Alberto
  • López-Conesa, Lluís
  • Estrader, Marta
  • López-Ortega, Alberto
  • Salazar-Álvarez, G.
  • Nogués, Josep
  • Ducati, Caterina
  • Midgley, Paul A.
  • Peiró, Francesca
  • Estradé, Sònia
The physicochemical properties used in numerous advanced nanostructured devices are directly controlled by the oxidation states of their constituents. In this work we combine electron energy-loss spectroscopy, blind source separation, and computed tomography to reconstruct in three dimensions the distribution of Fe and Fe ions in a FeO/FeO core/shell cube-shaped nanoparticle with nanometric resolution. The results highlight the sharpness of the interface between both oxides and provide an average shell thickness, core volume, and average cube edge length measurements in agreement with the magnetic characterization of the sample., This work has been carried out in the frame of the Spanish research projects MAT2013-41506, MAT2013-48628-R, FIS2013-46159-C3-3-P, and CSD2009-00013, and Catalan Government support from the SGR2014-672 and 2014-SGR1015 projects is acknowledged. We also acknowledge the support received from the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative-I3). G.S.A. was partially supported by the Knut and Alice Wallenberg Foundation (Project: 3DEMNATUR). M.E. acknowledges the Spanish Ministry of Science and Innovation through the Juan de la Cierva Program. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). F.d.l.P. and C.D. acknowledge funding from the ERC under grant no. 259619 PHOTO EM. C.D. acknowledges the Royal Society for funding, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D

  • Liu, Lichen
  • Díaz Morales, Urbano
  • Arenal, Raúl
  • Agostini, Giovanni
  • Concepción, Patricia
  • Corma, Avelino
Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 °C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene., This work was funded by the Spanish Government (Consolider Ingenio 2010-MULTICAT (CSD2009-00050) and MAT2014-52085-C2-1-P) and by the Generalitat Valenciana (Prometeo). The Severo Ochoa Program (SEV-2012-0267) is gratefully acknowledged. L.L. thanks ITQ for a contract. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. also acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 642742., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active magnetoplasmonic split-ring/ring nanoantennas

  • Feng, Hua Yu
  • Feng, Luo
  • Arenal, Raúl
  • Henrard, Luc
  • García-Pérez, Fernando
  • Armelles Reig, Gaspar
  • Cebollada, Alfonso
Here we present a novel active system, which combines the plasmon resonance enhancement of the magneto-optical activity in magnetoplasmonic nanostructures and the strong electromagnetic field localization of split ring resonators. The structures consist of a gold split ring resonator placed on top of a gold nanoring in the section of which a Co nanodot is inserted. By placing the split ring gap on top of the nanodot, and continuously varying the split ring gap opening, we are able to tune and enhance the electromagnetic field intensity in the Co nanodot, as confirmed experimentally by EELS and numerically using DDA simulation methods. In this way we obtain structures with a magneto-optical activity, which is 3 times larger than that of equivalent magnetoplasmonic rings without a split ring on top. These enhanced performances are due to the better control of the positioning, dimensions, and shape of the different components of the system. Such improvements are achieved using hole-mask colloidal lithography technique combined with multiaxial evaporation of the different materials., We acknowledge funding from the Spanish Ministry of Economy and Competitiveness (CSD2008-00023, MAT2011- 29194-C02-01, FIS2013-46159-C3-3-P, and MAT2014-58860-P), the EU 7th Framework Program (Grant Agreement 312483), and the EU-H2020 project (grant number 642742). H. Y. Feng acknowledges funding from CSC (Chinese Scholarship Council), grant no. 201206220112. F. Luo would like to acknowledge the support of NSFC (No. 51002003 & 11090332) as well as Ramon y Cajal grant RYC-2012-11954. The TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA) - Universidad de Zaragoza (Spain). This research used resources of the “Plateforme Technologique de Calcul Intensif (PTCI)” located at the University of Namur, Belgium, which is supported by the F.R.S.-FNRS under the convention no. 2.5020.11. The PTCI is the member of the “Consortium des Équipements de Calcul Intensif (CÉCI)”. R. A. gratefully acknowledges the support from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Accurate determination of the chiral indices of individual carbon nanotubes by combining electron diffraction and Resonant Raman spectroscopy

  • Levshov, Dmitry I.
  • Tran, Huy Nam
  • Paillet, Matthieu
  • Arenal, Raúl
  • Than, Xuantinh
  • Zahab, Ahmed Azmi
  • Yuzyuk, Yu I.
  • Sauvajol, Jean Louis
  • Michel, Thierry
The experimental approach combining high resolution transmission electron microscopy (HRTEM), electron diffraction (ED) and resonant Raman spectroscopy (RRS) on the same free-standing individual carbon nanotubes (CNT) is the most efficient method to determine unambiguously the intrinsic features of the Raman-active phonons. In this paper, we review the main results obtained by the approach regarding the intrinsic features of the phonons of single-walled (SWNT) and double-walled carbon nanotubes (DWNT). First, we detail the different methods to identify the structure of SWNTs and DWNTs from the analysis of their electron diffraction patterns (EDP). In the following, we remind the principal features of the Raman response of SWNTs, unambiguously index-identified by ED. A special attention is devoted to the effect of the inter-layer interaction on the frequencies of the Raman-active phonons in index-identified DWNTs. The information obtained on index-identified SWNT and DWNT allows us to propose Raman criteria, which help identifying CNT when the ED fails to propose a single assignment. The efficiency of the Raman criteria as the complement to the ED information for the index-assignment of a few SWNTs and DWNTs is shown. The same approach to index-assign a triple-walled carbon nanotube (TWNT), by combining ED and RRS information, is reported., D. L. gratefully acknowledges financial support of Russian Science Foundation (grant number 15-12-10004). NT, MP, TM, AAZ, and JLS acknowledge financial support by the ANR GAMBIT project, grant ANR-13-BS10-0014 of the French Agence Nationale de la Recherche and the International project of Scientific Cooperation with Vietnam (CNRS PICS 6457). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the European Union H2020 program under the grant 696656 Graphene Flagship. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant FIS2013-46159-C3-3-P, from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26), and from the European Union H2020 program under the ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advanced spectroscopic analyses on a:C-H materials: Revisiting the EELS characterization and its coupling with multi-wavelength Raman spectroscopy

  • Lajaunie, Luc
  • Pardanaud, Cédric
  • Martin, Céline
  • Puech, Pascal
  • Hu, Cheng
  • Biggs, Mark James
  • Arenal, Raúl
Hydrogenated amorphous carbon thin films (a:C-H) are very promising materials for numerous applications. The growing of relevance of a:C-H is mainly due to the long-term stability of their outstanding properties. For improving their performances, a full understanding of their local chemistry is highly required. Fifteen years ago, electron energy-loss spectroscopy (EELS), developed in a transmission electron microscope (TEM), was the technique of choice to extract such kind of quantitative information on these materials. Other optical techniques, as Raman spectroscopy, are now clearly favored by the scientific community. However, they still lack of the spatial resolution offered by TEM-EELS. In addition, nowadays, the complexity of the physics phenomena behind EELS is better known. Here, a:C-H thin films have been isothermally annealed and the evolution of their physical and chemical parameters have been monitored at the local and macroscopic scales. In particular, chemical in-depth inhomogeneities and their origins are highlighted. Furthermore, a novel procedure to extract properly and reliably quantitative chemical information from EEL spectra is presented. Finally, the pertinence of empirical models used by the Raman community is discussed. These works demonstrate the pertinence of the combination of local and macroscopic analyses for a proper study of such complex materials., The TEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative – I3) and 604391 Graphene Flagship, as well as from EU H2020 Grant Agreement 696656 Graphene Flagship. R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragón” 2014-2020 (grant number E/26), and from EU H2020 ETN project “Enabling Excellence” Grant Agreement 642742. The support of the Australian Research Council's Linkage Infrastructure, Equipment and Facilities Program (LE130100119) is also gratefully acknowledged for funding the Horiba Labram Raman system., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomic configuration of nitrogen-doped single-walled carbon nanotubes

  • Arenal, Raúl
  • March, Katia
  • Ewels, Christopher P.
  • Rocquefelte, Xavier
  • Kociak, Mathieu
  • Loiseau, Annick
  • Stephan, Odile
Having access to the chemical environment at the atomic level of a dopant in a nanostructure is crucial for the understanding of its properties. We have performed atomically resolved electron energy-loss spectroscopy to detect individual nitrogen dopants in single-walled carbon nanotubes and compared with first-principles calculations. We demonstrate that nitrogen doping occurs as single atoms in different bonding configurations: graphitic-like and pyrrolic-like substitutional nitrogen neighboring local lattice distortion such as Stone-Thrower-Wales defects. We also show that the largest fraction of nitrogen amount is found in poly aromatic species that are adsorbed on the surface of the nanotube walls. The stability under the electron beam of these nanotubes has been studied in two different cases of nitrogen incorporation content and configuration. These findings provide key information for the applications of these nanostructures., R.A. acknowledges funding from grants 165-119 and 165-120 from Universidad de Zaragoza, from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from ARAID foundation. We acknowledge Marcel Tencé from the LPS (CNRS-U. Paris XI, Orsay (France)) for his support with some of the EELS data analyses. We thank Shaïma Enouz-Védrenne and Jean-Lou Cochon from ONERA (Châtillon and Palaiseau, France) for sample synthesis. We acknowledge the useful comments of Mike Walls from the LPS (CNRS-Université Paris XI, Orsay (France)). Part of the microscopy work was conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon, Universidad de Zaragoza (Spain). The research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the French CNRS (FR3507) and CEA METSA network. C.P.E. acknowledges the SPRINT project ANR-10-BLAN-0819 funded by the French ANR for funding. COST network MP0901 NanoTP is acknowledged. C.P.E and X.R. thank the IMN (Nantes) and the CCIPL (Centre de Calcul Intensif des Pays de la Loire) for computing facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomic structural studies on thin single-crystalline misfit-layered nanotubes of TbS-CrS2

  • Panchakarla, Leela S.
  • Lajaunie, Luc
  • Tenne, Reshef
  • Arenal, Raúl
Various nanotubes from ternary misfit compounds have been reported in recent years. In the present work, the detailed atomic structure and chemical configuration of misfit-layered nanotubes based on the TbS-CrS2 are reported. These analyses have been developed via different transmission electron microscopy techniques, including high-resolution scanning transmission electron microscopy, electron diffraction, and electron energy loss spectroscopy. These structural analyses show that two different kinds of nanotubes can be produced: a “regular” nanotube and a “wavy” one. Both kinds of nanotubes show the alternating arrangements of the TbS and CrS2 subsystems; however, the wavy ones present a nearly periodically deficiency in terbium. In addition to the structural investigation, the chemical analyses have proved that the outer layer of both kinds of nanotubes is composed of the elements Cr and S. All these findings helped to understand the growth mechanism during the sulfurization reaction taking place in the synthesis process., Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative - I3) and under Grant Agreement 604391 Graphene Flagship. R.A. also acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). R.T. acknowledges the support of the Israel Science Foundation; the Israel National Nano-Initiative through its Focal Technology Areas program; the H. Perlman Foundation; the Irving and Azelle Waltcher Foundations in honor of Prof. M. Levy; and the Irving and Cherna Moskowitz Center for Nano and Bio-Nano Imaging. L.S.P. would like to thank the PBC Program of the Government of Israel and the Dean of the chemistry faculty, Weizmann Institute of Science, for a postdoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boron nitride materials: An overview from 0D to 3D (nano)structures

  • Arenal, Raúl
  • López-Bezanilla, Alejandro
Boron nitride (BN) materials present different crystalline phases including fullerene-like (0D), nanotubes (1D, NTs), hexagonal (2D, h-BN), and cubic (3D) structures. These materials show a rich variety of physical and chemical properties with multiple potential applications in industry, science, and technology, especially in the fields of nano-electronics, optoelectronics, field emission, and lubrication in extreme conditions of temperature. BN compounds are chemically and thermally very stable and resistant to oxidation. The large electronic band gap confers to BN compounds complementary electronic properties to the C allotropes with similar structure. The combination of BN and C materials forming heterostructures has gained an increasing importance in the nano-sciences. In particular, heterostructures combining graphene with mono- and multi-layer h-BN, or C- with BN-nanotubes are the object of intensive study in nano-sciences due to their unique electronic properties. Applications based on BN structures have created great expectations and offer enormous possibilities in the next generation of electronic devices. However, the massive production of high-quality defect-free BN materials is still an experimental challenge., R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). The research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483—ESTEEM2 (Integrated Infrastructure Initiative—I3) and under Grant Agreement 604391 Graphene Flagship. Work at Argonne is supported by DOE-BES under Contract No. DE-AC02-06CH11357., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron energy-loss spectroscopic tomography of Fe: XCo(3- x)O4 impregnated Co3O4 mesoporous particles: Unraveling the chemical information in three dimensions

  • Yedra, L.
  • Arenal, Raúl
  • López-Ortega, Alberto
  • Estrader, Marta
  • Peiró, Francesca
et al., Electron energy-loss spectroscopy-spectrum image (EELS-SI) tomography is a powerful tool to investigate the three dimensional chemical configuration in nanostructures. Here, we demonstrate, for the first time, the possibility to characterize the spatial distribution of Fe and Co cations in a complex FexCo(3−x)O4/Co3O4 ordered mesoporous system. This hybrid material is relevant because of the ferrimagnetic/antiferromagnetic coupling and high surface area. We unambiguously prove that the EELS-SI tomography shows a sufficiently high resolution to simultaneously unravel the pore structure and the chemical signal., The research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 – ESTEEM2 (Integrated Infrastructure Initiative – I3) and the Spanish CSD2009-00013 and MAT2013-41506 research projects. Catalan government funding from 2014-SGR-1015 and 2014-SGR-672 research projects is also appreciated. R. A. acknowledges funding from MINECO-Spain (FIS2013-46159-C3-3-P). E. P. is grateful to MINECO for the ‘Ramón y Cajal’ contract. M. E. acknowledges the Spanish Ministry of Science and Innovation through the Juan de la Cierva Program. Partial funding from the European Research Council (Consolidator Grant, project no. 648454, SPIN-PORICS) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering microencapsulation of highly catalytic gold nanoclusters for an extreme thermal stability

  • Sousa-Castillo, Ana
  • Gauthier, Sébastien
  • Arenal, Raúl
  • Pérez-Lorenzo, Moisés
  • Correa-Duarte, Miguel A.
A synthetic strategy for the microencapsulation of ultra-small gold nanoparticles toward the development of a novel nanoreactor is reported. In this case, it is shown that the catalytic activity of Au nanoclusters as small as 0.8 nm remains unaffected after a thermal treatment up to 800 °C in air. This is accomplished through the deposition and further coating of the gold nanoparticles in a void/silica/Au/silica configuration where the nature of the alternate shells can be tuned regardless of each other's porosity and the size of the embedded metal nanoparticles. Such spatial confinement suppresses the growth of the gold nanoclusters and thus preserves their catalytic properties. In this way, a remarkable compromise between the immobilization and the accessibility to the metal nanocatalyst can be met. Furthermore, these nanoreactors are found to be colloidally stable in simulated body fluids which also makes them suitable for biomedical applications. The implementation of hollow nanoreactors containing highly dispersed and immobilized but accessible ultra-small metal nanoparticles constitutes a promising alternative in the search for model catalysts stable under realistic technical conditions., This work was funded by Xunta de Galicia (INBIOMED-FEDER “unha maneira de facer Europa” and EM2014/035), Fundación Ramón Areces, Fundación Tatiana Pérez de Guzmán el Bueno, and European Union Seventh Framework Programme [FP7/REGPOT-2012-2013.1] under Grant Agreement no. 316265, BIOCAPS. The scanning transmission electron microscopy (STEM) studies were conducted at Laboratorio de Microscopías Avanzadas (LMA) at Instituto de Nanociencia de Aragón (INA) – Universidad de Zaragoza (Spain). The STEM measurements were supported by the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R. A. acknowledges funding from MINECO-Spain (FIS2013-46159-C3-3-P) and EU-H2020 project ITN-Enabling Excellence (Grant number 642742)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Excitonic optical transitions characterized by Raman excitation profiles in single-walled carbon nanotubes

  • Tran, Huy Nam
  • Blancon, Jean Christophe
  • Arenal, Raúl
  • Popov, Valentin N.
  • Ayari, Anthony
  • San Miguel, Alfonso
  • Vallèe, Fabrice G.
  • Fatti, Natalia del
  • Sauvajol, Jean Louis
  • Paillet, Matthieu
We examine the excitonic nature of the 𝐸33 optical transition of the individual free-standing index-identified (23,7) single-walled carbon nanotube by means of the measurements of its radial-breathing-mode and 𝐺-mode Raman excitation profiles. We confirm that it is impossible to determine unambiguously the nature of its 𝐸33 optical transition (excitonic vs band to band) based only on the excitation profiles. Nevertheless, by combining Raman scattering, Rayleigh scattering, and optical absorption measurements on strictly the same individual (23,7) single-walled carbon nanotube, we show that the absorption, Rayleigh spectra, and Raman excitation profiles of the longitudinal and transverse 𝐺 modes are best fitted by considering the nature of the 𝐸33 transition as excitonic. The fit of the three sets of data gives close values of the transition energy 𝐸33 and damping parameter Γ33. This comparison shows that the fit of the Raman excitation profiles provides with good accuracy the energy and damping parameter of the excitonic optical transitions in single-walled carbon nanotubes., H.N.T., M.P., A.A.Z., J.-L.S., and J.-R.H. acknowledge financial support from the ANR GAMBIT project, Grant No. ANR-13-BS10-0014 of the French Agence Nationale de la Recherche, and the International project of Scientific Cooperation with Vietnam (CNRS PICS 6457). We acknowledge the Dr. T. X. Tinh for the synthesis of individual nanotubes. J.-C.B., A.A., A.S.-M., F.V and N.D.F. acknowledge financial support from ANR programme P2N under Contract No. ANR11-NANO-025. V.N.P. acknowledges financial support from Project 316309: INERA - “Research and Innovation Capacity Strengthening of ISSP-BAS in Multifunctional Nanostructures.” The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement No. 312483- ESTEEM2 (Integrated Infrastructure Initiative -I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement No. 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exfoliated semiconducting pure 2H-MoS2 and 2H-WS2 assisted by chlorosulfonic acid

  • Pagona, Georgia
  • Bittencourt, Carla
  • Arenal, Raúl
  • Tagmatarchis, Nikos
Chlorosulfonic acid assisted the exfoliation of MoS2 and WS2 resulting in retaining their semiconducting 2H-phase, sharply contrasting the semiconducting-to-metallic phase-transition observed with the currently available exfoliation techniques., CB is a research associate at the National Fund for Scientific Research (FRS-FNRS, Belgium). Financial support from FRS-FNRS under contract 2.4577.11 (Chemographene) is acknowledged. The HR-STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain and supported by EU FP7 under Grant Agreements 312483 – ESTEEM2 (Integrated Infrastructure Initiative – I3) and 604391 Graphene Flagship. RA acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). RA and NT acknowledge financial support from the EU H2020 ETN project “Enabling Excellence” under Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fully crystalline faceted Fe-Au core-shell nanoparticles

  • Langlois, C.
  • Arenal, Raúl
  • Nicolai, J.
  • Ponchet, A.
  • Casanove, M. J.
et al., Fe–Au core–shell nanoparticles displaying an original polyhedral morphology have been successfully synthesized through a physical route. Analyses using transmission electron microscopy show that the Au shell forms truncated pyramids epitaxially grown on the (100) facets of the iron cubic core. The evolution of the elastic energy and strain field in the nanoparticles as a function of their geometry and composition is calculated using the finite-element method. The stability of the remarkable centered core–shell morphology experimentally observed is attributed to the weak elastic energy resulting from the low misfit at the Fe/Au (100) interface compared to the surface energy contribution., We gratefully acknowledge the CNRS for having funded a one-year secondment position at CEMES to one of us (C.L.) and the European Associated Laboratory (LEA)–TALEM2 for financial support. The HR-STEM studies were conducted at the Laboratorio de Microscopias Avanzadas (L.M.A.) at Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Part of this work was supported by the French Research National Agency under project Naïade ANR-11-BS10-017 and by the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative—I3). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalization of MoS2 with 1,2-dithiolanes: toward donor-acceptor nanohybrids for energy conversion

  • Canton-Vitoria, Rubén
  • Sayed-Ahmad-Baraza, Yuman
  • Peláez-Fernández, Mario
  • Arenal, Raúl
  • Bittencourt, Carla
  • Ewels, Christopher P.
  • Tagmatarchis, Nikos
The covalent functionalization of exfoliated semiconducting MoS2 by 1,2-dithiolanes bearing an ethylene glycol alkyl chain terminated to a butoxycarbonyl-protected amine and a photoactive pyrene moiety is accomplished. The MoS2-based nanohybrids were fully characterized by complementary spectroscopic, thermal, and microscopy techniques. Markedly, density functional theoretical studies combined with X-ray photoelectron spectroscopy analysis demonstrate preferential edge functionalization, primarily via sulfur addition along partially sulfur saturated zig-zag MoS2 molybdenum-edges, preserving intact the 2D basal structure of functionalized MoS2-based nanohybrids as confirmed by high-resolution transmission electron microscopy and electron energy loss spectroscopy. Furthermore, in the MoS2-pyrene hybrid, appreciable electronic interactions at the excited state between the photoactive pyrene and the semiconducting MoS2 were revealed as inferred by steady-state and time-resolved photoluminescence spectroscopy, implying its high potentiality to function in energy conversion schemes., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant agreement No 642742. C.B. is a research associate of FRS-FNRS. TEM studies were conducted at the Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union FP7 under Grant agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative—I3). The Government of Aragon, and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26) and the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grants FIS2013-46159-C3-3-P and MAT2016-79776-P (AEI/FEDER, UE), as well as from the European Union H2020 program “Graphene Flagship”, Grant Agreement 696656., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical nanoplatforms for high-performance enzyme biocatalysis under denaturing conditions

  • González-Domínguez, Elena
  • Arenal, Raúl
  • Pérez-Lorenzo, Moisés
  • Correa-Duarte, Miguel A.
et al., A hierarchically structured nanoplatform comprising the integration of enzymes into a hybrid carbon-nanotube-based magnetic nanocomposite was developed. By means of this complex support, laccases are endowed with exceptional performance even in fully denaturing environments. In this regard, up to 10-fold enhancements in the biocatalytic activity of the enzymes can be attained at different temperatures and pH conditions. Furthermore, these platforms are found to provide laccases with unprecedented recycling potential. In this line, these composites allow straightforward recovery and reuse of the biocatalysts with no loss of efficiency even after 10 successive runs. These outstanding operational capabilities make these nanocarriers a promising material to tackle the challenges associated with the implementation of enzymes in industrial biotechnology., This work was funded by Xunta de Galicia (INBIOMED-FEDER “unha maneira de facer Europa”, EM2014/035, and EM2014/041), MINECO-Spain (CTM2014-58481-R), Fundación Ramón Areces, Fundación Tatiana Pérez de Guzmán el Bueno, and European Union Seventh Framework Programme [FP7/REGPOT-2012-2013.1] under Grant Agreement no. 316265, BIOCAPS. The scanning transmission electron microscopy (STEM) and aberration-corrected TEM studies were conducted at Laboratorio de Microscopías Avanzadas (LMA) at Instituto de Nanociencia de Aragón (INA)—Universidad de Zaragoza (Spain). The STEM measurements were supported by European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. acknowledges funding from MINECO-Spain (FIS2013-46159-C3-3-P) and EU-H2020 project ITN-Enabling Excellence (Grant Number 642742)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High dielectric constant and capacitance in ultrasmall (2.5 nm) SrHfO3 perovskite nanoparticles produced in a low temperature non-aqueous sol-gel route

  • Karmaoui, Mohamed
  • Venkata Ramana, E.
  • Tobaldi, David Maria
  • Lajaunie, Luc
  • Graça, Manuel P.
  • Arenal, Raúl
  • Seabra, Maria P.
  • Labrincha, J. A.
  • Pullar, Robert C.
Strontium hafnium oxide (SrHfO3) has great potential as a high-k gate dielectric material, for use in memories, capacitors, CMOS and MOSFETs. We report for the first time the dielectric properties (relative permittivity and capacitance) of SrHfO3 nanoparticles (NPs), as opposed to thin films or sintered bulk ceramics. These monodisperse, ultra-small, perovskite-type SrHfO3 nanocrystals were synthesised through a non-aqueous sol–gel process under solvothermal conditions (at only 220 °C) using benzyl alcohol as a solvent, and with no other capping agents or surfactants. Advanced X-ray diffraction methods (whole powder pattern modelling, WPPM), CS-corrected high-resolution scanning transmission electron microscopy (HRSTEM), dielectric spectroscopy, and optical (UV-vis, Raman) and photoluminescent spectroscopy were used to fully characterise the NPs. These SrHfO3 NPs are the smallest reported and highly monodisperse, with a mean diameter of 2.5 nm, a mode of 2.0 nm and a small size distribution. The formation mechanism of the NPs was determined using NMR and GC-MS analysis of the species involved. Our SrHfO3 nanoparticles had a dielectric constant of 17, which is on par with literature data for bulk and thin film samples, and they also had a relatively large capacitance of 9.5 nF cm−2. As such, they would be suitable for applications as gate dielectrics for capacitors and in metal-oxide semiconductor field-effect transistor (MOSFET) technology., Mohamed Karmaoui thanks Fundação para a Ciência e a Tecnologia (FCT) for Grant no. SFRH/BPD/74477/2010. Robert C. Pullar acknowledges the support of FCT grant SFRH/BPD/97115/2013. This work was developed in the scope of the project CICECO-Aveiro Institute of Materials (Ref. FCT UID/CTM/50011/2013), financed by national funds through the FCT/MEC and when applicable co-financed by FEDER under the PT2020 Partnership Agreement. Mohamed Karmaoui thanks Prof. Artur Silva for NMR measurements and fruitful discussions. Dr Carla Andrea Vilela is acknowledged for helpful discussions regarding the GC-MS (University of Aveiro, Portugal). Authors also acknowledge the PEstC/CTM/LA0011/2013 programme. E. Venkata Ramana would like to acknowledge the financial support from FCT, Portugal (SFRH/BPD/75582/2010). The HRSTEM work was conducted in the Laborario de Microscopías Avanzadas (LMA) at the Instituto de Nanociencia de Aragón (INA) – Universidad de Zaragoza (Spain). Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 – ESTEEM2 (Integrated Infrastructure Initiative – I3). Raul Arenal also acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interlayer dependence of G-modes in semiconducting double-walled carbon nanotubes

  • Levshov, Dmitry I.
  • Michel, Thierry
  • Arenal, Raúl
  • Tran, Huy Nam
  • Than, T.
  • Paillet, Matthieu
  • Yuzyuk, Yu I.
  • Sauvajol, Jean Louis
A double-walled carbon nanotube (DWNT), a coaxial composite of two single-walled carbon nanotubes (SWNT), provides a unique model to study interactions between the two constituent SWNTs. Combining high resolution transmission electron microscopy (HRTEM), electron diffraction (ED), and resonant Raman scattering (RRS) experiments on the same individual suspended DWNT is the ultimate way to relate unambiguously its atomic structure, defined by the chiral indices of the coaxial outer/inner SWNTs, and its Raman-active vibration modes. This approach is used to investigate the intertube distance dependence of the G-modes of individual index-identified DWNTs composed of two semiconducting SWNTs. We state the main features of the dependence of the G-mode frequencies on the distance between the inner and outer layers: (i) When the interlayer distance is larger than the nominal van der Waals distance (close to 0.34 nm), a downshift of the inner-layer G-modes with respect to the G-modes in the equivalent SWNTs is measured. (ii) The amplitude of the downshift depends on the interlayer distance, or in other words, on the negative pressure felt by the inner layer in DWNT. (iii) No shift is observed for an intertube distance close to 0.34 nm., This work has been done in the framework of the GDR-E No. 2756 “Science and Application of the Nanotubes-NANO-E”. The authors acknowledge financial support from ANR GAMBIT,TRAIN2 network and French Russian PICS No. 4818. The authors thank Vincent Jourdain for helpful discussions about the synthesis of individual carbon nanotubes. The authors acknowledge financial support from RFBR Grant 15-02-08340 and funding from the Spanish Ministerio de Economia y Competitividad (Grant FIS2013-46159-C3-3-P). The research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3) and under Grant Agreement 604391 Graphene Flagship. The microscopy work was conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragón, Universidad de Zaragoza (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local plasmonic studies on individual core-shell gold-silver and pure gold nano-bipyramids

  • Arenal, Raúl
  • Henrard, Luc
  • Roiban, Lucian
  • Ersen, Ovidiu
  • Burgin, Julien
  • Treguer-Delapierre, Mona
Bimetallic systems present new opportunities to tailor the optical properties of nanoparticles. Morphology, structural, and optical properties of gold and of gold–silver nanoparticles have been studied by three-dimensional (3D) scanning transmission electron microscopy (STEM), STEM imaging, and monochromated subnanometer electron beams. The 3D morphology of these nanoparticles consists of bipyramidal prisms with well-defined facets. Furthermore, in the case of the core–shell nanoparticles, from these tomographical studies, we have determined the silver (shell) distribution and their atomic arrangement. Multipolar localized surface plasmon resonances (LSPR) have been studied, at subnanometer level and at high-energy resolution, as a function of their shape, their size (aspect ratio), and the surrounding environment. These results have been interpreted in the framework of the discrete dipole approximation (DDA) simulations. The effect of the silver outer-shell has been elucidated. We observed a significant damping of plasmon excitations due to the difference of dielectric function of these two metals. In addition, we have shown that the combination of the tomographical and plasmonic (experiments and simulations) studies with such high spatial resolution constitutes a very powerful and fundamental tool for understanding and optimizing the photonics properties of nanomaterials., The TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA) - Universidad de Zaragoza (Spain). R.A. acknowledges funding from Grants 165-119 and 165-120 from U. de Zaragoza, from ARAID foundation, and from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). The research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative–I3). This research used resources of the “Plateforme Technologique de Calcul Intensif (PTCI)” (http://www.ptci.unamur.be) located at the University of Namur, Belgium, which is supported by the F.R.S.-FNRS under the convention no. 2.4520.11. The PTCI is a member of the “Consortium des Équipements de Calcul Intensif (CÉCI)” (http://www.ceci-hpc.be). R.A. and L.H. also acknowledge the support received from the European COST MP0901-NanoTP Action., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Morphological tunability of the plasmonic response: From hollow gold nanoparticles to gold nanorings

  • Prieto, Martín
  • Arenal, Raúl
  • Henrard, Luc
  • Gomez, Leyre
  • Sebastián, Víctor
  • Arruebo, Manuel
The optical and morphological properties of hollow gold nanoparticles (HGNPs) can be finely modified by employing poly-l-lysine hydrobromide (PLL), a homopoly amino acid of the l-lysine, used as reducer and stabilizer. We demonstrate that the reshaping of these plasmonic hollow nanostructures responds to an Ostwald ripening process in which the initial HGNPs dissolve under the acidic conditions provided by the PLL generating chloroaurate ions. These ions are then reduced by the primary amines of the PLL itself to produce metallic gold, which is then redeposited on the surface of the HGNPs, rendering the final shape: either nanorings or even spheres depending on the contact time. We investigate locally the plasmonic response of these nanostructures by electron energy loss spectroscopy (EELS). The plasmon excitations are interpreted by discrete dipole approximation (DDA) simulations. We demonstrate that, thanks to this controlled top-down morphological modification, a fine-tuning of the optical response is possible. Unlike the traditional lithographic techniques, this has been achieved in a controlled manner using wet chemistry, enabling the potential use of these nanostructures for a broad range of plasmonic applications, including biomedicine, catalysis, and quantum communications., The TEM work was conducted in the Laborario de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA), Universidad de Zaragoza (Spain). Financial support from the EU thanks to the ERC Consolidator Grant Program (ERC-2013-CoG-614715, NANOHEDONISM) and the People Program (CIG-Marie Curie Actions, REA Grant Agreement No. 321642) are gratefully acknowledged. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483, ESTEEM2 (Integrated Infrastructure Initiative, I3). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). This research used resources of the “Plateforme Technologique de Calcul Intensif (PTCI)” (http://www.ptci.unamur.be) located at the University of Namur, Belgium, which is supported by the F.R.S.-FNRS under the Convention No. 2.4520.11. The PTCI is member of the “Consortium des Équipements de Calcul Intensif (CÉCI)” (http://www.ceci-hpc.be)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanotubes from oxide-based misfit family: The case of calcium cobalt oxide

  • Panchakarla, Leela S.
  • Lajaunie, Luc
  • Ramasubramaniam, Ashwin
  • Arenal, Raúl
  • Tenne, Reshef
Misfit layered compounds (MLCs) have generated significant interest in recent years as potential thermoelectric materials. MLC nanotubes could reveal behavior that is entirely different from the bulk material. Recently, new chemical strategies were exploited for the synthesis of nanotubular forms of chalcogenide-based MLCs, which are promising candidates for thermoelectric materials. However, analogous synthesis of oxide-based MLC nanotubes has not been demonstrated until now. Here, we report a chemical strategy for synthesis of cobalt-oxide-based misfit nanotubes. A combination of high-resolution (scanning) transmission electron microscopy (including image simulations), spatially resolved electron energy-loss spectroscopy, electron diffraction, and density functional theory (DFT) calculations is used to discover the formation of a phase within these nanotubes that differs significantly from bulk calcium cobaltite MLCs. Furthermore, DFT calculations show that this phase is semiconducting with a band gap in excess of 1 eV, unlike bulk calcium cobaltite MLCs, which are known to be metallic. Through systematic experiments, we propose a formation mechanism for these nanotubes that could also apply more generally to realizing other oxide-based MLC nanotubes., The Israel Science Foundation (grant 265/12); the H. Perlman Foundation; the Irving and Azelle Waltcher Foundations in honor of Prof. M. Levy; and the Irving and Cherna Moskowitz Center for Nano and Bio-Nano Imaging are acknowledged. L.S.P. thanks the PBC Program of the Government of Israel and the Dean of the chemistry faculty, Weizmann Institute of Science, for a postdoctoral fellowship. The STEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the European Union H2020 Grant Agreement 696656 Graphene Flagship. R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitrogen segregation in nanocarbons

  • Ewels, Christopher P.
  • Arenal, Raúl
  • Bittencourt, Carla
  • Briddon, P.
et al., We explore the behaviour of nitrogen doping in carbon nanomaterials, notably graphene, nanotubes, and carbon thin films. This is initially via a brief review of the literature, followed by a series of atomistic density functional calculations. We show that at low concentrations, substitutional nitrogen doping in the sp(2)-C graphenic basal plane is favoured, however once the nitrogen concentration reaches a critical threshold there is a transition towards the formation of the more thermodynamically-favoured nitrogen terminated 'zigzag' type edges. These can occur either via formation of finite patches (polycyclic aromatic azacarbons), strips of sp(2) carbon with zigzag nitrogen edges, or internal nitrogen-terminated hole edges within graphenic planes. This transition to edge formation is especially favoured when the nitrogen can be partially functionalised with, e.g. hydrogen. By comparison with available literature results, notably from electron energy loss spectroscopy and X-ray spectroscopy, the current results suggest that much of the nitrogen believed to be incorporated into carbon nanoobjects is instead likely to be present terminating the edges of carbonaceous impurities attached to nanoobject's surface. By comparison to nitrogen-doped tetrahedrally amorphous carbon, we suggest that this transition at around 10-20% nitrogen concentration and above towards sp(2) coordination via internal nitrogen-terminated edge formation may be a general property of nitrogen-doped carbon materials., We would like to acknowledge TUBITAK-2219 Abroad Post-Doctoral Research Funding Programme (Ref. no. 1059B191301289) for supporting DE. CB and MS are supported by the Belgian Fund for Scientific Research (FSR-FNRS) under contract ‘CHEMOGRAPHENE’ (no. 2.4577.11). CPE, PW acknowledge the French SPRINT project ANR-10-BLAN-0819. RA acknowledges the European Union Seventh Framework Program under Grant Agreement 312483 – ESTEEM2 (Integrated Infrastructure Initiative – I3), and all authors the COST network MP0901 NanoTP. We thank Odile Stephan, Katia March, Matthieu Kociak and Annick Loiseau for stimulating discussions. CE and CB thank PHC Tournesol 31160RC for funding. R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Noncovalent stable functionalization makes carbon nanotubes hydrophilic and biocompatible

  • Ernst, Friederike
  • Arenal, Raúl
  • Fernández-Pacheco, Rodrigo
F. Ernst et al., Semiconducting single-wall carbon nanotubes possess an intrinsic photoluminescence in the near-infrared region beyond 900 nm, the NIR-II window of biological imaging. Here, we introduce a modular molecule for noncovalent nanotube functionalization which renders carbon nanotubes hydrophilic and fully biocompatible through a one-step process. We demonstrate through electron energy-loss spectroscopy (EELS) spectroscopy that the noncovalent functionalization mechanism relies on tight and extremely robust π–π stacking, which survives an exchange of the solvent as well as drying. Furthermore, the modularity of the molecule design allows for the introduction of functional units into the molecule itself to modify the optical properties of the carbon nanotube, for instance to augment its excitation window through an excitation energy transfer, facilitating the excitation of most carbon nanotube chiralities at one single wavelength., We gratefully acknowledge the financial support of the European Research Council (grant number 210642) and the German Research Foundation (DFG via SFB 658, subprojects A6 and B7). ZG and LC thank J. Varuela and L. Groc for the use of the absorption reader for MTT assay and acknowledge financial support from CNRS, Agence Nationale de la Recherche (ANR-14-OHRI-0001-01), IdEx Bordeaux (ANR-10-IDEX-03-02), and the France-BioImaging national infrastructure (ANR-10-INBS-04-01). The microscopy works were conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon - Universidad de Zaragoza (Spain). R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant FIS2013-46159-C3-3-P and MAT2016-79776-P (AEI/FEDER, UE). The Government of Aragon and the European Social Fund are gratefully acknowledged. R.A. gratefully acknowledges the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-dimensional molecular crystal of phthalocyanine confined into single-walled carbon nanotubes

  • Alvarez, Laurent
  • Arenal, Raúl
  • Bantignies, J. L.
HAL Id: hal-01123545.-- et al., New one-dimensional (1D) hybrid nanosystems are elaborated with metalated or metal free phthalocyanine molecules encapsulated into the hollow core of single-walled carbon nanotubes. The X-ray diffraction experiments coupled to simulation allow evidencing the 1D structural organization of the molecules inside the nanotubes. The angle between the molecule ring and the nanotube axis is close to 32° as determined from our density functional theory calculations. Confined molecules display Raman spectra hardly altered with respect to the bulk phase, suggesting a rather weak interaction with the tubes. For comparison, noncovalent functionalization at the outer surface of the tube is also investigated. The vibrational properties of the molecules functionalized at the outer surface of tubes display important modifications. A significant curvature of the phthalocyanine is induced by the interaction with the tube walls, leading to change of the central atom position within the molecular ring, in good agreement with our first-principles calculations., The transmission electron microscopy studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA)–Universidad de Zaragoza (Spain). The TEM measurements were supported by the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). This work was realized with the support of HPC@LR, a Center of Competence in High-Performance Computing from the Languedoc-Roussillon region, funded by the Languedoc-Roussillon region, Europe and Université Montpellier 2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the advantages of spring magnets compared to pure FePt: Strategy for rare-earth free permanent magnets following a bottom-up approach

  • Pousthomis, M.
  • Arenal, Raúl
  • Lacroix, Lise-Marie
Nanostructured magnets benefiting from efficient exchange-coupling between hard and soft grains represent an appealing approach for integrated miniaturized magnetic power sources. Using a bottom-up approach, nanostructured materials were prepared from binary assemblies of bcc FeCo and fcc FePt nanoparticles and compared with pure L10-FePt materials. The use of a bifunctional mercapto benzoic acid yields homogeneous assemblies of the two types of particles while reducing the organic matter amount. The 650 °C thermal annealing, mandatory to allow the L10-FePt phase transition, led to an important interdiffusion and thus decreased drastically the amount of soft phase present in the final composites. The analysis of recoil curves however evidenced the presence of an efficient interphase exchange coupling, which allows obtaining better magnetic performances than pure L10 FePt materials, energy product above 100 kJ m−3 being estimated for a Pt content of only 33%. These results clearly evidenced the interest of chemically grown nanoparticles for the preparation of performant spring-magnets, opening promising perspective for integrated subcentimetric magnets with optimized properties., A partial support was obtained through the grant NEXT n° ANR-10-LABX-0037 in the framework of the “Programme des Investissements d’Avenir” and by the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN Marie Sklodowska-Curie project Grant Agreement 642742. We gratefully acknowledge the European Associated Laboratory (LEA)-TALEM2 for financial support. The aberration-corrected HR-STEM studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA), Universidad de Zaragoza, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidation-assisted graphene heteroepitaxy on copper foil

  • Reckinger, Nicolas
  • Tang, Xiaohui
  • Joucken, Frédéric
  • Lajaunie, Luc
  • Arenal, Raúl
  • Dubois, Emmanuel
  • Hackens, Benoît
  • Henrard, Luc
  • Colomer, Jean-François
We propose an innovative, easy-to-implement approach to synthesize aligned large-area single-crystalline graphene flakes by chemical vapor deposition on copper foil. This method doubly takes advantage of residual oxygen present in the gas phase. First, by slightly oxidizing the copper surface, we induce grain boundary pinning in copper and, in consequence, the freezing of the thermal recrystallization process. Subsequent reduction of copper under hydrogen suddenly unlocks the delayed reconstruction, favoring the growth of centimeter-sized copper (111) grains through the mechanism of abnormal grain growth. Second, the oxidation of the copper surface also drastically reduces the nucleation density of graphene. This oxidation/reduction sequence leads to the synthesis of aligned millimeter-sized monolayer graphene domains in epitaxial registry with copper (111). The as-grown graphene flakes are demonstrated to be both single-crystalline and of high quality., The research leading to this work received funding from the European Union Seventh Framework Program under grant agreement No 604391 Graphene Flagship. The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has also received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative – I3), as well as from EU H2020 ETN project “Enabling Excellence” Grant Agreement 642742 and the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). This work is partially supported by the Multi-Sensor-Platform for Smart Building Management project (No. 611887). This research used resources of the Electron Microscopy Service at the University of Namur (“Plateforme Technologique Morphologie – Imagerie”). This research also used resources of the ELISE Service of the University of Namur. This service is member of the “Plateforme Technologique SIAM”. Part of this work was financially supported by the Actions de Recherche Concertées (ARC) “StressTronics” and “NATURIST”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preserving π-conjugation in covalently functionalized carbon nanotubes for optoelectronic applications

  • Setaro, Antonio
  • Adeli, Mohsen
  • Glaeske, Mareen
  • Przyrembel, Daniel
  • Bisswanger, Timo
  • Gordeev, Georgy
  • Maschietto, Federica
  • Faghani, Abbas
  • Paulus, Beate
  • Weinelt, Martin
  • Arenal, Raúl
  • Haag, Rainer
  • Reich, Stephanie
Covalent functionalization tailors carbon nanotubes for a wide range of applications in varying environments. Its strength and stability of attachment come at the price of degrading the carbon nanotubes sp2 network and destroying the tubes electronic and optoelectronic features. Here we present a non-destructive, covalent, gram-scale functionalization of single-walled carbon nanotubes by a new [2+1] cycloaddition. The reaction rebuilds the extended π-network, thereby retaining the outstanding quantum optoelectronic properties of carbon nanotubes, including bright light emission at high degree of functionalization (1 group per 25 carbon atoms). The conjugation method described here opens the way for advanced tailoring nanotubes as demonstrated for light-triggered reversible doping through photochromic molecular switches and nanoplasmonic gold-nanotube hybrids with enhanced infrared light emission., We gratefully acknowledge the German Research Foundation (DFG via SFB 658, subprojects A6, B7 and Z) and the Focus Area NanoScale of the Freie Universität Berlin for financial support. We thank S. Selve of the ZELMI (Technical University of Berlin) for the TEM measurements of the Au@SWNT hybrids, and A. Wimmer and K. Huth for their support. High-resolution STEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. acknowledges the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P), the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E/26), the European Union Seventh Framework Program under Grant Agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative – I3) and 604391 and 696656 Graphene Flagship, as well as from EU H2020 ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantum interference effects on the intensity of the G modes in double-walled carbon nanotubes

  • Tran, Huy Nam
  • Blancon, Jean Christophe
  • Arenal, Raúl
  • Parret, Romain
  • Zahab, Ahmed Azmi
  • Ayari, Anthony
  • Vallèe, Fabrice G.
  • Fatti, Natalia del
  • Sauvajol, Jean Louis
  • Paillet, Matthieu
The effects of quantum interferences on the excitation dependence of the intensity of 𝐺 modes have been investigated on single-walled carbon nanotubes [Duque et al., Phys. Rev. Lett. 108, 117404 (2012)]. In this work, by combining optical absorption spectroscopy and Raman scattering on individual index identified double-walled carbon nanotubes, we examine the experimental excitation dependence of the intensity of longitudinal optical and transverse optical 𝐺 modes of the constituent inner and outer single-walled carbon nanotubes. The observed striking dependencies are understood in terms of quantum interference effects. Considering such effects, the excitation dependence of the different components of the 𝐺 modes permits us to unambiguously assign each of them as originating from the longitudinal or transverse 𝐺 modes of inner and outer tubes., H.N.T., R.P., A.A.Z., J.L.S., and M.P. acknowledge financial support by the ANR GAMBIT project, Grant No. ANR-13-BS10-0014 of the French Agence Nationale de la Recherche, and the International project of Scientific Cooperation with Vietnam (CNRS PICS 6457). J.-C.B., A.A., F.V., and N.D.F. acknowledge financial support by ANR programme P2N under Contract ANR-11-NANO-025. The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement No. 312483- ESTEEM2 (Integrated Infrastructure Initiative I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad [FIS2013-46159- C3-3-P and MAT2016-79776-P (AEI/FEDER, UE)] and from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (Grant No. E/26)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Radial collapse of carbon nanotubes for conductivity optimized polymer composites

  • Balima, Félix
  • Arenal, Raúl
  • San Miguel, Alfonso
F. Balima et al., The optimization of the electronic conduction of carbon nanotube polymer composites is studied by tuning the radial geometry of the carbon nanotubes in a compression cycle. We have investigated the structural evolution of multi-walled carbon nanotubes in a polyamide matrix as a function of applied high pressure. Combining high resolution electron microscopy and small angle neutron scattering experiments, we conclude that the nanotube radial cross-section is irreversibly deformed following applied pressures up to 5 GPa. Studying highly percolated composites we observe that the sample resistivity drastically decreases with pressure up to about 2 GPa with no further change up to the maximum 5 GPa applied pressure. An important hysteresis is observed upon decompression which leads to an enhanced electrical conductivity of the composite in all the studied compression cycles with maximum pressures ranging from 1 to 5 GPa. Modelling the radial collapse of single-walled carbon nanotubes shows that the modified radial geometry can considerably improve the electronic transport properties in contacted carbon nanotube junctions. Our results open opportunities for engineering nanotube composites by controlling the radial collapse., We acknowledge financial support by the ANR program P2N under Contract ANR-11-NANO-025 “TRI-CO”. We are indebted to the Arkema company for providing samples and associated information. We acknowledge technical support of F. Legrand (ILM, Lyon). The transmission electron microscopy studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA) - Universidad de Zaragoza (Spain). R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). The research leading to these TEM results has received funding from the from the European Union Seventh Framework Program under Grant Agreement 604391 Graphene Flagship, as well as from EU H2020 ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SERS detection of amyloid oligomers on metallorganic-decorated plasmonic beads

  • Guerrini, Luca
  • Arenal, Raúl
  • Mannini, Benedetta
  • Chiti, Fabrizio
  • Pini, Roberto
  • Matteini, Paolo
  • Álvarez-Puebla, Ramón A.
Protein misfolded proteins are among the most toxic endogenous species of macromolecules. These chemical entities are responsible for neurodegenerative disorders such as Alzheimer's, Parkinson's, Creutzfeldt-Jakob's and different non-neurophatic amyloidosis. Notably, these oligomers show a combination of marked heterogeneity and low abundance in body fluids, which have prevented a reliable detection by immunological methods so far. Herein we exploit the selectivity of proteins to react with metallic ions and the sensitivity of surface-enhanced Raman spectroscopy (SERS) toward small electronic changes in coordination compounds to design and engineer a reliable optical sensor for protein misfolded oligomers. Our strategy relies on the functionalization of Au nanoparticle-decorated polystyrene beads with an effective metallorganic Raman chemoreceptor, composed by Al(3+) ions coordinated to 4-mercaptobenzoic acid (MBA) with high Raman cross-section, that selectively binds aberrant protein oligomers. The mechanical deformations of the MBA phenyl ring upon complexation with the oligomeric species are registered in its SERS spectrum and can be quantitatively correlated with the concentration of the target biomolecule. The SERS platform used here appears promising for future implementation of diagnostic tools of aberrant species associated with protein deposition diseases, including those with a strong social and economic impact, such as Alzheimer's and Parkinson's diseases., This work was funded by the Spanish Ministerio de Economia y Competitividad (CTQ2011-23167 and FIS2013-46159-C3-3-P), the European Research Council (CrossSERS, FP7/2013 329131, PrioSERS FP7/2014 623527, and ESTEEM2-312483), and Medcom Advance SA. The transmission electron microscopy work was conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon, Universidad de Zaragoza (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Smallest bimetallic CoPt3 superparamagnetic nanoparticles

  • Karmaoui, Mohamed
  • Amaral, J. S.
  • Lajaunie, Luc
  • Puliyalil, Harinarayanan
  • Tobaldi, David Maria
  • Pullar, Robert C.
  • Labrincha, J. A.
  • Arenal, Raúl
  • Cvelbar, Uroš
We present for the first time a nonaqueous sol–gel route to produce ultrasmall (<2 nm) magnetic bimetallic CoPt3 nanoparticles (NPs). The one-pot procedure is carried out at low temperature (180 °C) using benzyl alcohol, acting as both reducing agent and solvent. The highly monodisperse CoPt3 NPs were investigated with innovative advanced X-ray methods (whole powder pattern modeling), HR-STEM, XPS, and SQUID magnetometry. XPS showed Co was mostly in metallic form, but with a very small amount of CoO on the NP surface. The spherical NPs had an ultrasmall diameter of 1.6 nm and could self-assemble in aligned linear chains, or nanobelts, of single NPs. They are superparamagnetic, with blocking temperature of ∼20 K and coercivity at 10 K of 27.9 kA m–1 (∼350 Oe). However, there is evidence of a second magnetic phase (probably CoO) in the ZFC magnetization curve, which enhances their magnetization values, without significantly affecting their superparamagnetism., This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, POCI-01-0145-FEDER-007679 (FCT ref. UID/CTM/50011/2013), financed by national funds through the FCT/MEC and when appropriate cofinanced by FEDER under the PT2020 Partnership Agreement. We acknowledge Fundação para a Ciência e a Tecnologia (FCT) for grant SFRH/BPD/74477/2010 (M.K.), Ciência2008 program and grant SFRH/BPD/97115/2013 (R.C.P.), grant SFRH/BPD/111270/2015 (J.S.A.), M. Ferro for microscopy analysis, which was supported by RNME-Pole University of Aveiro FCT Project REDE/1509/RME/2005, and Prof. Artur Silva for fruitful discussions (University of Aveiro, Portugal). U.C. acknowledges support of Slovenian Research Agency (ARRS) grant no. L2-7667. The STEM and EDS studies were conducted at the Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative – I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strontium cobalt oxide misfit nanotubes

  • Panchakarla, Leela S.
  • Lajaunie, Luc
  • Ramasubramaniam, Ashwin
  • Arenal, Raúl
  • Tenne, Reshef
Low-dimensional misfit layered compounds have been found to have ultralow thermal conductivity, which is attributed to their unique structure and the low dimensionality. There are a few studies reporting the preparation of sulfide-based misfit nanotubes but only one study on oxide-based analogs. In this investigation, we report a new oxide-based misfit nanotube derived from misfit layered strontium cobaltite. Thorough structural investigation by electron microscopy techniques, including electron diffraction, aberration corrected high-resolution (scanning) transmission electron microscopy, and electron energy-loss spectroscopy along with density functional theory calculations show that these nanotubes consist of alternating layers of SrCoO2 and CoO2. We have studied systematically the effect of base concentration on the structure and composition of the nanotubes, which reveals the importance of misfit stress to tightly roll the structure into tubular form and thus control the synthesis. Electronic structure calculations find that the structures are semiconducting with a ferrimagnetic ground state. Our studies further extend the family of bulk misfit layered oxides into the 1D realm with potential applications in thermoelectric and electronic devices., The Israel Science Foundation (grant 265/12), the H. Perlman Foundation, the Irving and Azelle Waltcher Foundations in honor of Prof. M. Levy, and the Irving and Cherna Moskowitz Center for Nano and Bio-Nano Imaging are acknowledged. L.S.P. acknowledges the PBC Program of the Government of Israel and the Dean of the chemistry faculty, Weizmann Institute of Science, for a postdoctoral fellowship. A.R. gratefully acknowledges computational support from the Massachusetts Green High Performance Computing Center as well as the University of Massachusetts Amherst. The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 ESTEEM2 (Integrated Infrastructure Initiative – I3) and from the European Union H2020 program under the grant 696656 Graphene Flagship. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant FIS2013-46159-C3-3-P, from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E/26), and from the European Union H2020 program under the ETN project “Enabling Excellence” Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and EELS studies on doped carbon nanostructures for cold field emission

  • Wang, Rongrong
  • Arenal, Raúl
  • Masseboeuf, Aurélien
  • Neumeyer, David
  • Monthioux, Marc
  • López-Bezanilla, Alejandro
This work was supported by the project ANR LASCAR (ANR-13-BS04-0007), the project ESTEEM-2 (312483), the Spanish MINECO (FIS2013-46159-C3-3-P), and international associated laboratory TALEM (CNRS - U. of Zaragoza)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of collective radial breathing-like modes in double-walled carbon nanotubes: Combination of continuous two-dimensional membrane theory and Raman spectroscopy

  • Levshov, Dmitry I.
  • Avramenko, Marina V.
  • Than, Xuantinh
  • Michel, Thierry
  • Arenal, Raúl
  • Paillet, Matthieu
  • Rochal, Sergei B.
  • Yuzyuk, Yu I.
  • Sauvajol, Jean Louis
Levshov et al., Radial breathing modes (RBMs) are widely used for the atomic structure characterization and index assignment of single-walled carbon nanotubes (SWNTs) from resonant Raman spectroscopy. However, for double-walled carbon nanotubes (DWNTs), the use of conventional ωRBM(d) formulas is complicated due to the van der Waals interaction between the layers, which strongly affects the frequencies of radial modes and leads to new collective vibrations. This paper presents an alternative way to theoretically study the collective radial breathing-like modes (RBLMs) of DWNTs and to account for interlayer interaction, namely the continuous two-dimensional membrane theory. We obtain an analytical ωRBLM(do,di) relation, being the equivalent of the conventional ωRBM(d) expressions, established for SWNTs. We compare our theoretical predictions with Raman data, measured on individual index-identified suspended DWNTs, and find a good agreement between experiment and theory. Moreover, we show that the interlayer coupling in individual DWNTs strongly depends on the interlayer distance, which is manifested in the frequency shifts of the RBLMs with respect to the RBMs of the individual inner and outer tubes. In terms of characterization, this means that the combination of Raman spectroscopy data and predictions of continuous membrane theory may give additional criteria for the index identification of DWNTs, namely the interlayer distance., D. L., M. A., D. R., and S. R. gratefully acknowledge the financial support of Russian Science Foundation (Grant No. 15-12-10004). R. A. gratefully acknowledges the support of the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and funding from the European Union Seventh Framework Program under Grant No. 312483–ESTEEM2 (Integrated Infrastructure InitiativeI3). The microscopy work was conducted in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon, Universidad de Zaragoza (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of MoS2 nanosheets

  • Deokar, G.
  • Vignaud, D.
  • Arenal, Raúl
  • Louette, P.
  • Colomer, Jean-François
Here, we report on the synthesis of MoS2 nanosheets using a simple two-step additive-free growth technique. The as-synthesized nanosheets were characterized to determine their structure and composition, as well as their optical properties. The MoS2 nanosheets were analyzed by scanning electron microscopy, transmission electron microscopy (TEM), including high-resolution scanning TEM imaging and energy-dispersive x-ray spectroscopy, x-ray photoelectron spectroscopy (XPS), Raman spectroscopy and photoluminescence (PL). The as-produced MoS2 nanosheets are vertically aligned with curved edges and are densely populated. The TEM measurements confirmed that the nanosheets have the 2H-MoS2 crystal structure in agreement with the Raman results. The XPS results revealed the presence of high purity MoS2. Moreover, a prominent PL similar to mechanically exfoliated few and mono-layer MoS2 was observed for the as-grown nanosheets. For the thin (≤50 nm) nanosheets, the PL feature was observed at the same energy as that for a direct band-gap monolayer MoS2 (1.83 eV). Thus, the as-produced high-quality, large-area, MoS2 nanosheets could be potentially useful for various optoelectronic and catalysis applications., This research work was financially supported by a grant of the University of Namur, Belgium. G Deokar is grateful to C Santos (University catholic of Louvain, 1, Place de Université, Louvain-la-Neuve, Belgium) for allowing initial Raman measurements of MoS2 samples. JFC is Research Associate of FRS-FNRS. The research leading to these results have received partial funding from the European Union Seventh Framework Program under the grant agreement n°604391 Graphene Flagship. D Vignaud acknowledges financial support from the Nord-Pas de Calais Regional Council and the Renatech network. The HR-STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R Arenal gratefully acknowledges the support of ARAID foundation, of the INA—U. Zaragoza (Spain), from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union Seventh Framework Program under Grant Agreement 312483—ESTEEM2 (Integrated Infrastructure Initiative—I3) and from EU H2020 ETN project 'Enabling Excellence' Grant Agreement 642742., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and optical properties of homogeneous nanoshurikens

  • Morla-Folch, Judit
  • Guerrini, Luca
  • Pazos-Pérez, Nicolás
  • Arenal, Raúl
  • Álvarez-Puebla, Ramón A.
During the last years the controlled synthesis of Au nanoparticles (NPs) has almost become a reality, and structures such as spheres, cubes, rods, decahedra, or octahedra can be prepared with a la carte dimensions in a very homogeneous manner. However, the fabrication of spiked particles, the most efficient plasmonic NPs, with controllable geometric parameters remains elusive. Here we show how to prepare highly homogeneous spiked nanoparticles composed of a penta-twinned core and five tips. These nanoparticles, reminiscent of ninja nanoshurikens (throwing stars), exhibit the ability to concentrate large electromagnetic fields at the apexes of the tips upon illumination. The apexes also present high affinity for analytes, giving rise to an unprecedented capacity for quantitative optical ultradetection with SERS., The research leading to these results has received funding from the European Union Seventh Framework Program under the following grant agreements: FP7MC-IEF329131 (CrossSERS); FP7MC-IEF-623527 (PRIOSERS) and 312483 - ESTEEM2 (Integrated Infrastructure Initiative−I3).This work was also funded by the Spanish Ministerio de Economia y Competitividad (CTQ2011-23167 and FIS2013-46159-C3-3-P) and Medcom Advance SA. The TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Instituto de Nanociencia de Aragon (INA)−Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Systematic study of oxygen vacancy tunable transport properties of few-layer MoO3−x enabled by vapor-based synthesis

  • Hanson, Eve D.
  • Lajaunie, Luc
  • Arenal, Raúl
  • Dravid, Vinayak P.
Vinayak P. Dravid et al., Bulk and nanoscale molybdenum trioxide (MoO3) has shown impressive technologically relevant properties, but deeper investigation into 2D MoO3 has been prevented by the lack of reliable vapor-based synthesis and doping techniques. Herein, the successful synthesis of high-quality, few-layer MoO3 down to bilayer thickness via physical vapor deposition is reported. The electronic structure of MoO3 can be strongly modified by introducing oxygen substoichiometry (MoO3−x), which introduces gap states and increases conductivity. A dose-controlled electron irradiation technique to introduce oxygen vacancies into the few-layer MoO3 structure is presented, thereby adding n-type doping. By combining in situ transport with core-loss and monochromated low-loss scanning transmission electron microscopy–electron energy-loss spectroscopy studies, a detailed structure–property relationship is developed between Mo-oxidation state and resistance. Transport properties are reported for MoO3−x down to three layers thick, the most 2D-like MoO3−x transport hitherto reported. Combining these results with density functional theory calculations, a radiolysis-based mechanism for the irradiation-induced oxygen vacancy introduction is developed, including insights into favorable configurations of oxygen defects. These systematic studies represent an important step forward in bringing few-layer MoO3 and MoO3−x into the 2D family, as well as highlight the promise of MoO3−x as a functional, tunable electronic material., This material is partially based upon work supported by the National Science Foundation under Grant No. DMR-1507810. The EELS study was conducted at the Laboratorio de Microscopías Avanzadas, Instituto de Nanociencia de Aragón, Universidad de Zaragoza, Spain. Some of the research leading to these results had received funding from the European Union Seventh Framework Programme under Grant Agreements 312483- ESTEEM2 (Integrated Infrastructure Initiative-I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P and MAT2016-79776-P) and from the European Union H2020 programs ETN project “Enabling Excellence” Grant Agreement 642742 and “Graphene Flagship” Grant Agreement 696656. S.H. and C.W. (DFT calculations) acknowledge support by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, under Grant No. DEFG02-07ER46433. This work made use of the EPIC and SPID facilities of the NUANCE Center at Northwestern University, which has received support from the Soft and Hybrid Nanotechnology Experimental (SHyNE) Resource (NSF NNCI-1542205); the MRSEC program (NSF DMR-1121262) at the Materials Research Center; the International Institute for Nanotechnology (IIN); the Keck Foundation; and the State of Illinois, through the IIN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TEMPO-oxidized cellulose nanofibers as interfacial strengthener in continuous-fiber reinforced polymer composites

  • Uribe, B.E.B.
  • Chiromito, E.M.S.
  • Carvalho, A.J.F.
  • Arenal, Raúl
  • Tarpani, Jose Ricardo
This paper presents a fast and practical route to improve the stress transfer of continuous fiber-reinforced polymer matrix composite laminates. This method concerns on-the-surface treatment of unsized carbon and glass fiber fabrics with 2,2,6,6-TetraMethyl-1-PiperidinylOxy (TEMPO) oxidized cellulose nanofibers before the laminate manufacturing step. The proposed method generated an increase in ultimate flexural strength of 62% and 54% for carbon and glass fiber-reinforced epoxy, respectively, and enhanced the out-of-plane properties of both hierarchical systems, as proved by short beam strength test, which showed an improvement of approximately 40% for both. The nanocellulose interphase was measured via transmission electron microscopy and energy-dispersive X-ray spectroscopy (EDS) techniques, showing a thickness of approximately 20 nm for the hierarchical carbon fiber composite laminate., Taking into account these results, this method demonstrates to be a useful alternative in the design and manufacturing of modern hierarchical composite structures., This work was supported by CNPq - Brazilian Council for Scientific and Technological Development [process number 140339/2015-9]; Laboratory for Surface Science and Brazilian Nanotechnology National Laboratory (LNNano) [proposal AFM 20681, 2016]; European Union Seventh Framework Programme [Grant Agreements 312483 - ESTEEM2 (Integrated Infrastructure Initiative - I3)]; Spanish Ministry of Economy and Competitiveness (MINECO) [project grants: FIS2013-46159-C3-3-P and MAT2016-79776-P (AEI/FEDER, UE)]; Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 [grant number E/26]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Titania-coated gold nanorods with expanded photocatalytic response. Enzyme-like glucose oxidation under near-infrared illumination

  • Ortega-Liébana, M. Carmen
  • Hueso, José L.
  • Arenal, Raúl
  • Santamaría, Jesús
Gold nanorods coated with a uniform titanium dioxide nanoshell have been prepared and used as glucose-oxidase surrogates. Remarkably, this core-shell photocatalytic nanostructure has been able to induce complete oxidation of glucose at near room temperature (32-34 °C) in a wide range of pH values with the aid of a near-infrared (NIR) irradiation source. In contrast, the uncoated gold nanorods exhibit negligible photo-oxidation response under identical experimental conditions thereby proving the photoactivity of the titania shell towards glucose oxidation. The process takes place via in situ photo-generation of singlet oxygen or hydroxyl radicals as reactive oxidative species (ROS). This underlines the role played by the core nanorods as plasmonic light harvesters in the NIR range and constitutes the first example of a NIR-activated enzyme-like catalyst., The (S)TEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de, Spain. The authors acknowledge the European Research Council for funding through an advanced grant research project (HECTOR grant number 267626) and a CIG-Marie Curie Reintegration Grant (NANOLIGHT REA grant number 294094). The syntheses of materials have been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN). Some of the research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative − I3). R.A. gratefully acknowledges the support from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P) and from the European Union H2020 program ETN project “Enabling Excellence” Grant Agreement 642742. M.C.O. also acknowledges the Spanish Government for the receipt of an FPU predoctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrathin gold nanowires: Soft-templating versus liquid phase synthesis, a quantitative study

  • Loubat, Anaïs
  • Lacroix, Lise-Marie
  • Robert, Antoine
  • Impéror-Clerc, Marianne
  • Poteau, Romuald
  • Maron, Laurent
  • Arenal, Raúl
  • Pansu, Brigitte
  • Viau, Guillaume
HAL Id: hal-02020268, Ultrathin Au nanowires were prepared following two routes: the reduction of the lamellar phase [OY–AuICl] in an excess of pure oleylamine and the direct reduction of AuIII in a solution of oleylamine in hexane. The superiority of the reduction of chloride gold precursor in isotropic environment is evidenced by small-angle X-ray scattering (SAXS) measurements. A reaction yield of 75% is observed, an order of magnitude higher than the route involving the lamellar phase. On the basis of a detailed SAXS analysis, the soft template role of the [OY–AuICl] intermediate solid phase was discarded for the nanowire growth. In the case of the liquid phase synthesis, density functional theory (DFT) calculations evidence a cooperative adsorption and organization of ions pairs at the surface of the ultrathin Au NWs. We propose that this charged backbone plays a key role in the unique growth mechanism of such anisotropic objects., The authors acknowledge the financial support of the Midi-Pyrénées region, of the University of Toulouse, PRES, of the Labex NEXT, No. 11 LABX 075, of the French GDR Or-Nano. Simon Cayez (LPCNO, Toulouse) is warmly thanked for the EDS analysis and the preparation of TEM grids. We thank Francis Chouzenoux (LPCNO, Toulouse) for TGA–DSC measurements. R.A. acknowledges funding from the Spanish Ministerio de Economia y Competitividad (FIS2013-46159-C3-3-P). Microscopy work was conducted in the Unité Mixte de Service Castaing, Toulouse (France) and in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia de Aragon, Universidad de Zaragoza (Spain). The research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative—I3). R.P. thanks the HPCs CALcul en MIdi-Pyrénées (CALMIP-Hyperion and CALMIP-EOS, Grant P0611) and the Grand Equipement National de Calcul Intensif (GENCI-TGCC-Curie, Grant 6211) for generous allocations of computer time., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study of collective radial breathing-like modes in double-walled carbon nanotubes: Combination of continuous two-dimensional membrane theory and Raman spectroscopy

  • Levshov, D.I.
  • Avramenko, M.V.
  • Than, X.T
  • Michel, T.
  • Arenal, R.
  • Paillet, M.
  • Rybkovskiy, D.V.
  • Osadchy, A.V.
  • Rochal, S.B.
  • Yuzyuk, Y.I.
  • Sauvajol, J.L
Radial breathing modes (RBMs) are widely used for the atomic structure characterization and index assignment of single-walled carbon nanotubes (SWNTs) from resonant Raman spectroscopy. However, for double-walled carbon nanotubes (DWNTs), the use of conventional ¿RBM(d) formulas is complicated due to the van der Waals interaction between the layers, which strongly affects the frequencies of radial modes and leads to new collective vibrations. This paper presents an alternative way to theoretically study the collective radial breathing-like modes (RBLMs) of DWNTs and to account for interlayer interaction, namely the continuous two-dimensional membrane theory. We obtain an analytical ¿RBLM(do, di) relation, being the equivalent of the conventional ¿RBM(d) expressions, established for SWNTs. We compare our theoretical predictions with Raman data, measured on individual index-identified suspended DWNTs, and find a good agreement between experiment and theory. Moreover, we show that the interlayer coupling in individual DWNTs strongly depends on the interlayer distance, which is manifested in the frequency shifts of the RBLMs with respect to the RBMs of the individual inner and outer tubes. In terms of characterization, this means that the combination of Raman spectroscopy data and predictions of continuous membrane theory may give additional criteria for the index identification of DWNTs, namely the interlayer distance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interlayer Dependence of G-Modes in Semiconducting Double-Walled Carbon Nanotubes

  • Levshov, D.I.
  • Michel, T.
  • Arenal, R.
  • Tran, H.N.
  • Than, T.X.
  • Paillet, M.
  • Yuzyuk, Y.I.
  • Sauvajol, J.L.
A double-walled carbon nanotube (DWNT), a coaxial composite of two single-walled carbon nanotubes (SWNT), provides a unique model to study interactions between the two constituent SWNTs. Combining high resolution transmission electron microscopy (HRTEM), electron diffraction (ED), and resonant Raman scattering (RRS) experiments on the same individual suspended DWNT is the ultimate way to relate unambiguously its atomic structure, defined by the chiral indices of the coaxial outer/inner SWNTs, and its Raman-active vibration modes. This approach is used to investigate the intertube distance dependence of the G-modes of individual index-identified DWNTs composed of two semiconducting SWNTs. We state the main features of the dependence of the G-mode frequencies on the distance between the inner and outer layers: (i) When the interlayer distance is larger than the nominal van der Waals distance (close to 0.34 nm), a downshift of the inner-layer G-modes with respect to the G-modes in the equivalent SWNTs is measured. (ii) The amplitude of the downshift depends on the interlayer distance, or in other words, on the negative pressure felt by the inner layer in DWNT. (iii) No shift is observed for an intertube distance close to 0.34 nm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Excitonic optical transitions characterized by Raman excitation profiles in single-walled carbon nanotubes

  • Tran, H.N.
  • Blancon, J.C.
  • Huntzinger, J.R.
  • Arenal, R.
  • Popov, V.N.
  • Zahab, A.A.
  • Ayari, A.
  • San-Miguel, A.
  • Vallée, F.
  • Del Fatti, N.
  • Sauvajol, J.L.
  • Paillet, M.
We examine the excitonic nature of the E33 optical transition of the individual free-standing index-identified (23, 7) single-walled carbon nanotube by means of the measurements of its radial-breathing-mode and G-mode Raman excitation profiles. We confirm that it is impossible to determine unambiguously the nature of its E33 optical transition (excitonic vs band to band) based only on the excitation profiles. Nevertheless, by combining Raman scattering, Rayleigh scattering, and optical absorption measurements on strictly the same individual (23, 7) single-walled carbon nanotube, we show that the absorption, Rayleigh spectra, and Raman excitation profiles of the longitudinal and transverse G modes are best fitted by considering the nature of the E33 transition as excitonic. The fit of the three sets of data gives close values of the transition energy E33 and damping parameter G33. This comparison shows that the fit of the Raman excitation profiles provides with good accuracy the energy and damping parameter of the excitonic optical transitions in single-walled carbon nanotubes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Oxidation-assisted graphene heteroepitaxy on copper foil

  • Reckinger, N.
  • Tang, X.
  • Joucken, F.
  • Lajaunie, L.
  • Arenal, R.
  • Dubois, E.
  • Hackens, B.
  • Henrard, L.
  • Colomer, J.F.
We propose an innovative, easy-to-implement approach to synthesize aligned large-area single-crystalline graphene flakes by chemical vapor deposition on copper foil. This method doubly takes advantage of residual oxygen present in the gas phase. First, by slightly oxidizing the copper surface, we induce grain boundary pinning in copper and, in consequence, the freezing of the thermal recrystallization process. Subsequent reduction of copper under hydrogen suddenly unlocks the delayed reconstruction, favoring the growth of centimeter-sized copper (111) grains through the mechanism of abnormal grain growth. Second, the oxidation of the copper surface also drastically reduces the nucleation density of graphene. This oxidation/reduction sequence leads to the synthesis of aligned millimeter-sized monolayer graphene domains in epitaxial registry with copper (111). The as-grown graphene flakes are demonstrated to be both single-crystalline and of high quality.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Preserving p-conjugation in covalently functionalized carbon nanotubes for optoelectronic applications

  • Setaro, A.
  • Adeli, M.
  • Glaeske, M.
  • Przyrembel, D.
  • Bisswanger, T.
  • Gordeev, G.
  • Maschietto, F.
  • Faghani, A.
  • Paulus, B.
  • Weinelt, M.
  • Arenal, R.
  • Haag, R.
  • Reich, S.
Covalent functionalization tailors carbon nanotubes for a wide range of applications in varying environments. Its strength and stability of attachment come at the price of degrading the carbon nanotubes sp 2 network and destroying the tubes electronic and optoelectronic features. Here we present a non-destructive, covalent, gram-scale functionalization of single-walled carbon nanotubes by a new 2+1] cycloaddition. The reaction rebuilds the extended p-network, thereby retaining the outstanding quantum optoelectronic properties of carbon nanotubes, including bright light emission at high degree of functionalization (1 group per 25 carbon atoms). The conjugation method described here opens the way for advanced tailoring nanotubes as demonstrated for light-triggered reversible doping through photochromic molecular switches and nanoplasmonic gold-nanotube hybrids with enhanced infrared light emission.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Atomic configuration of nitrogen-doped single-walled carbon nanotubes

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Morphological tunability of the plasmonic response: From hollow gold nanoparticles to gold nanorings

  • Prieto, M.
  • Arenal, R.
  • Henrard, L.
  • Gomez, L.
  • Sebastian, V.
  • Arruebo, M.
The optical and morphological properties of hollow gold nanoparticles (HGNPs) can be finely modified by employing poly-l-lysine hydrobromide (PLL), a homopoly amino acid of the l-lysine, used as reducer and stabilizer. We demonstrate that the reshaping of these plasmonic hollow nanostructures responds to an Ostwald ripening process in which the initial HGNPs dissolve under the acidic conditions provided by the PLL generating chloroaurate ions. These ions are then reduced by the primary amines of the PLL itself to produce metallic gold, which is then redeposited on the surface of the HGNPs, rendering the final shape: either nanorings or even spheres depending on the contact time. We investigate locally the plasmonic response of these nanostructures by electron energy loss spectroscopy (EELS). The plasmon excitations are interpreted by discrete dipole approximation (DDA) simulations. We demonstrate that, thanks to this controlled top-down morphological modification, a fine-tuning of the optical response is possible. Unlike the traditional lithographic techniques, this has been achieved in a controlled manner using wet chemistry, enabling the potential use of these nanostructures for a broad range of plasmonic applications, including biomedicine, catalysis, and quantum communications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electrical conductivity of oxidized-graphenic nanoplatelets obtained from bamboo: Effect of the oxygen content

  • Gross, K.
  • Barragán, J.J.P.
  • Sangiao, S.
  • De Teresa, J.M.
  • Lajaunie, L.
  • Arenal, R.
  • Calderón, H.A.
  • Prieto, P.
The large-scale production of graphene and reduced-graphene oxide (rGO) requires low-cost and eco-friendly synthesis methods. We employed a new, simple, cost-effective pyrolytic method to synthetize oxidized-graphenic nanoplatelets (OGNP) using bamboo pyroligneous acid (BPA) as a source. Thorough analyses via high-resolution transmission electron microscopy and electron energy-loss spectroscopy provides a complete structural and chemical description at the local scale of these samples. In particular, we found that at the highest carbonization temperature the OGNP-BPA are mainly in a sp2 bonding configuration (sp2 fraction of 87%). To determine the electrical properties of single nanoplatelets, these were contacted by Pt nanowires deposited through focused-ion-beam-induced deposition techniques. Increased conductivity by two orders of magnitude is observed as oxygen content decreases from 17% to 5%, reaching a value of 2.3 103 S m-1 at the lowest oxygen content. Temperature-dependent conductivity reveals a semiconductor transport behavior, described by the Mott three-dimensional variable range hopping mechanism. From the localization length, we estimate a band-gap value of 0.22(2) eV for an oxygen content of 5%. This investigation demonstrates the great potential of the OGNP-BPA for technological applications, given that their structural and electrical behavior is similar to the highly reduced rGO sheets obtained by more sophisticated conventional synthesis methods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Intrinsic phonon properties of double-walled carbon nanotubes

  • Tran, H. N.
  • Levshov, D. I.
  • Nguyen, V. C.
  • Paillet, M.
  • Arenal, R.
  • Than, X. T.
  • Zahab, A. A.
  • Yuzyuk, Y. I.
  • Phan, N. M.
  • Sauvajol, J. -L
  • Michel, T.
Double-walled carbon nanotubes (DWNT) are made of two concentric and weakly van der Waals coupled single-walled carbon nanotubes (SWNT). DWNTs are the simplest systems for studying the mechanical and electronic interactions between concentric carbon layers. In this paper we review recent results concerning the intrinsic features of phonons of DWNTs obtained from Raman experiments performed on index-identified DWNTs. The effect of the interlayer distance on the strength of the mechanical and electronic coupling between the layers, and thus on the frequencies of the Raman-active modes, namely the radial breathinglike modes (RBLMs) and G-modes, are evidenced and discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantum interference effects on the intensity of the G modes in double-walled carbon nanotubes

  • Tran, H.N.
  • Blancon, J.C.
  • Arenal, R.
  • Parret, R.
  • Zahab, A.A.
  • Ayari, A.
  • Vallée, F.
  • Del Fatti, N.
  • Sauvajol, J.L.
  • Paillet, M.
The effects of quantum interferences on the excitation dependence of the intensity of G modes have been investigated on single-walled carbon nanotubes [Duque, Phys. Rev. Lett. 108, 117404 (2012)PRLTAO0031-900710.1103/PhysRevLett.108.117404]. In this work, by combining optical absorption spectroscopy and Raman scattering on individual index identified double-walled carbon nanotubes, we examine the experimental excitation dependence of the intensity of longitudinal optical and transverse optical G modes of the constituent inner and outer single-walled carbon nanotubes. The observed striking dependencies are understood in terms of quantum interference effects. Considering such effects, the excitation dependence of the different components of the G modes permits us to unambiguously assign each of them as originating from the longitudinal or transverse G modes of inner and outer tubes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Graphene oxide-carbon nanotube hybrid assemblies: Cooperatively strengthened OH¿O=C hydrogen bonds and the removal of chemisorbed water

  • Núñez, J.D.
  • Benito, A.M.
  • Rouzière, S.
  • Launois, P.
  • Arenal, R.
  • Ajayan, P.M.
  • Maser, W.K.
Owing to their great significance for energy storage and sensing applications, multi-layer papers consisting of graphene oxide-carbon nanotube (GO-CNT) hybrid sheets were prepared by in situ exfoliation of graphite oxide in the presence of oxidized CNTs (oCNTs). For the first time we elucidate the influence of oCNTs on chemisorbed water (CW), i.e. the water molecules inherently bound to the oxygen functional groups (OFGs) of graphene oxide (GO) and responsible for irreversible structural damage upon thermal reduction processes. We show that oCNTs self-assemble onto GO sheets during the liquid phase processing steps by forming cooperatively strengthened OH¿OC hydrogen bonds between the carboxylic groups of the oCNTs and OFGs of GO. At oCNT amounts of about 10 to 15 wt% this leads to the displacement of considerable amounts of CW without altering the original chemical composition of GO. The thermally reduced GO-CNT (rGO-CNT) papers reveal improved sp2 character and an enhancement of the specific capacitance by 75% with respect to thermally reduced GO (rGO), largely due to the effective removal of CW by oxidized CNTs. These findings disclose the relevance of the cooperative hydrogen bonding phenomena in graphene oxide paper/film electrodes for the development of improved electrochemical energy storage and sensing devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Functionalization of MoS2 with 1, 2-dithiolanes: toward donor-acceptor nanohybrids for energy conversion

  • Canton-Vitoria, R.
  • Sayed-Ahmad-Baraza, Y.
  • Pelaez-Fernandez, M.
  • Arenal, R.
  • Bittencourt, C.
  • Ewels, C.P.
  • Tagmatarchis, N.
The covalent functionalization of exfoliated semiconducting MoS2 by 1, 2-dithiolanes bearing an ethylene glycol alkyl chain terminated to a butoxycarbonyl-protected amine and a photoactive pyrene moiety is accomplished. The MoS2-based nanohybrids were fully characterized by complementary spectroscopic, thermal, and microscopy techniques. Markedly, density functional theoretical studies combined with X-ray photoelectron spectroscopy analysis demonstrate preferential edge functionalization, primarily via sulfur addition along partially sulfur saturated zig-zag MoS2 molybdenum-edges, preserving intact the 2D basal structure of functionalized MoS2-based nanohybrids as confirmed by high-resolution transmission electron microscopy and electron energy loss spectroscopy. Furthermore, in the MoS2-pyrene hybrid, appreciable electronic interactions at the excited state between the photoactive pyrene and the semiconducting MoS2 were revealed as inferred by steady-state and time-resolved photoluminescence spectroscopy, implying its high potentiality to function in energy conversion schemes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Continuous-mode laser ablation at the solid-liquid interface of pelletized low-cost materials for the production of luminescent Silicon Carbide nanocrystals

  • Ortega-Liébana, M. C.
  • Hueso, J. L.
  • Arenal, R.
  • Lahoz, R.
  • De La Fuente, G.F.
  • Santamaría, J.
We report on the fabrication of silicon carbide (SiC) nanocrystals using a continuous scanning mode laser for the ablation of pelletized SiC microparticles. As a major advantage, we propose the in situ generation and collection of freestanding nanoparticles in an ethanol liquid medium and the use of cost-effective SiC targets in comparison with those commercially available or synthesized after multiple steps. The SiC NPs exhibit luminescent properties under UV exposure and excellent colloidal stability for extended periods of time. The influence of a more oxidizing solvent such as water is also evaluated as the collecting medium.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D

  • Liu, L.
  • Díaz, U.
  • Arenal, R.
  • Agostini, G.
  • Concepción, P.
  • Corma, A.
Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 °C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Systematic study of Oxygen vacancy tunable transport properties of few-layer MoO3- x enabled by vapor-based synthesis

  • Hanson, E.D.
  • Lajaunie, L.
  • Hao, S.
  • Myers, B.D.
  • Shi, F.
  • Murthy, A.A.
  • Wolverton, C.
  • Arenal, R.
  • Dravid, V.P.
Bulk and nanoscale molybdenum trioxide (MoO3) has shown impressive technologically relevant properties, but deeper investigation into 2D MoO3 has been prevented by the lack of reliable vapor-based synthesis and doping techniques. Herein, the successful synthesis of high-quality, few-layer MoO3 down to bilayer thickness via physical vapor deposition is reported. The electronic structure of MoO3 can be strongly modified by introducing oxygen substoichiometry (MoO3- x), which introduces gap states and increases conductivity. A dose-controlled electron irradiation technique to introduce oxygen vacancies into the few-layer MoO3 structure is presented, thereby adding n-type doping. By combining in situ transport with core-loss and monochromated low-loss scanning transmission electron microscopy–electron energy-loss spectroscopy studies, a detailed structure–property relationship is developed between Mo-oxidation state and resistance. Transport properties are reported for MoO3- x down to three layers thick, the most 2D-like MoO3- x transport hitherto reported. Combining these results with density functional theory calculations, a radiolysis-based mechanism for the irradiation-induced oxygen vacancy introduction is developed, including insights into favorable configurations of oxygen defects. These systematic studies represent an important step forward in bringing few-layer MoO3 and MoO3- x into the 2D family, as well as highlight the promise of MoO3- x as a functional, tunable electronic material.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nanotubes from Oxide-based Misfit Family: the case of Calcium Cobalt Oxide

  • Panchakarla, L. S.
  • Lajaunie, L.
  • Ramasubramaniam, A.
  • Arenal, R.
  • Tenne, R.
Misfit layered compounds (MLCs) have generated significant interest in recent years as potential thermoelectric materials. MLC nanotubes could reveal behavior that is entirely different from the bulk material. Recently, new chemical strategies were exploited for the synthesis of nanotubular forms of chalcogenide-based MLCs, which are promising candidates for thermoelectric materials. However, analogous synthesis of oxide-based MLC nanotubes has not been demonstrated until now. Here, we report a chemical strategy for synthesis of cobalt-oxide-based misfit nanotubes. A combination of high-resolution (scanning) transmission electron microscopy (including image simulations), spatially resolved electron energy-loss spectroscopy, electron diffraction, and density functional theory (DFT) calculations is used to discover the formation of a phase within these nanotubes that differs significantly from bulk calcium cobaltite MLCs. Furthermore, DFT calculations show that this phase is semiconducting with a band gap in excess of 1 eV, unlike bulk calcium cobaltite MLCs, which are known to be metallic. Through systematic experiments, we propose a formation mechanism for these nanotubes that could also apply more generally to realizing other oxide-based MLC nanotubes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Accurate determination of the chiral indices of individual carbon nanotubes by combining electron diffraction and Resonant Raman spectroscopy

  • Levshov, D. I.
  • Tran, H. N.
  • Paillet, M.
  • Arenal, R.
  • Than, X. T.
  • Zahab, A. A.
  • Yuzyuk, Y. I.
  • Sauvajol, J. -L
  • Michel, T.
The experimental approach combining high resolution transmission electron microscopy (HRTEM), electron diffraction (ED) and resonant Raman spectroscopy (RRS) on the same free-standing individual carbon nanotubes (CNT) is the most efficient method to determine unambiguously the intrinsic features of the Raman-active phonons. In this paper, we review the main results obtained by the approach regarding the intrinsic features of the phonons of single-walled (SWNT) and double-walled carbon nanotubes (DWNT). First, we detail the different methods to identify the structure of SWNTs and DWNTs from the analysis of their electron diffraction patterns (EDP). In the following, we remind the principal features of the Raman response of SWNTs, unambiguously index-identified by ED. A special attention is devoted to the effect of the inter-layer interaction on the frequencies of the Raman-active phonons in index-identified DWNTs. The information obtained on index-identified SWNT and DWNT allows us to propose Raman criteria, which help identifying CNT when the ED fails to propose a single assignment. The efficiency of the Raman criteria as the complement to the ED information for the index-assignment of a few SWNTs and DWNTs is shown. The same approach to index-assign a triple-walled carbon nanotube (TWNT), by combining ED and RRS information, is reported.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strontium Cobalt Oxide Misfit Nanotubes

  • Panchakarla, L. S.
  • Lajaunie, L.
  • Ramasubramaniam, A.
  • Arenal, R.
  • Tenne, R.
Low-dimensional misfit layered compounds have been found to have ultralow thermal conductivity, which is attributed to their unique structure and the low dimensionality. There are a few studies reporting the preparation of sulfide-based misfit nanotubes but only one study on oxide-based analogs. In this investigation, we report a new oxide-based misfit nanotube derived from misfit layered strontium cobaltite. Thorough structural investigation by electron microscopy techniques, including electron diffraction, aberration corrected high-resolution (scanning) transmission electron microscopy, and electron energy-loss spectroscopy along with density functional theory calculations show that these nanotubes consist of alternating layers of SrCoO2 and CoO2. We have studied systematically the effect of base concentration on the structure and composition of the nanotubes, which reveals the importance of misfit stress to tightly roll the structure into tubular form and thus control the synthesis. Electronic structure calculations find that the structures are semiconducting with a ferrimagnetic ground state. Our studies further extend the family of bulk misfit layered oxides into the 1D realm with potential applications in thermoelectric and electronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Radial collapse of carbon nanotubes for conductivity optimized polymer composites

  • Balima, F.
  • Le Floch, S.
  • Adessi, C.
  • Cerqueira, T. F. T.
  • Blanchard, N.
  • Arenal, R.
  • Brûlet, A.
  • Marques, M. A. L.
  • Botti, S.
  • San-Miguel, A.
The optimization of the electronic conduction of carbon nanotube polymer composites is studied by tuning the radial geometry of the carbon nanotubes in a compression cycle. We have investigated the structural evolution of multi-walled carbon nanotubes in a polyamide matrix as a function of applied high pressure. Combining high resolution electron microscopy and small angle neutron scattering experiments, we conclude that the nanotube radial cross-section is irreversibly deformed following applied pressures up to 5 GPa. Studying highly percolated composites we observe that the sample resistivity drastically decreases with pressure up to about 2 GPa with no further change up to the maximum 5 GPa applied pressure. An important hysteresis is observed upon decompression which leads to an enhanced electrical conductivity of the composite in all the studied compression cycles with maximum pressures ranging from 1 to 5 GPa. Modelling the radial collapse of single-walled carbon nanotubes shows that the modified radial geometry can considerably improve the electronic transport properties in contacted carbon nanotube junctions. Our results open opportunities for engineering nanotube composites by controlling the radial collapse.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High dielectric constant and capacitance in ultrasmall (2.5 nm) SrHfO3 perovskite nanoparticles produced in a low temperature non-aqueous sol-gel route

  • Karmaoui, M.
  • Ramana, E.V.
  • Tobaldi, D.M.
  • Lajaunie, L.
  • Graca, M.P.
  • Arenal, R.
  • Seabra, M.P.
  • Labrincha, J.A.
  • Pullar, R.C.
Strontium hafnium oxide (SrHfO3) has great potential as a high-k gate dielectric material, for use in memories, capacitors, CMOS and MOSFETs. We report for the first time the dielectric properties (relative permittivity and capacitance) of SrHfO3 nanoparticles (NPs), as opposed to thin films or sintered bulk ceramics. These monodisperse, ultra-small, perovskite-type SrHfO3 nanocrystals were synthesised through a non-aqueous sol-gel process under solvothermal conditions (at only 220 degrees C) using benzyl alcohol as a solvent, and with no other capping agents or surfactants. Advanced X-ray diffraction methods (whole powder pattern modelling, WPPM), CS-corrected high-resolution scanning transmission electron microscopy (HRSTEM), dielectric spectroscopy, and optical (UV-vis, Raman) and photoluminescent spectroscopy were used to fully characterise the NPs. These SrHfO3 NPs are the smallest reported and highly monodisperse, with a mean diameter of 2.5 nm, a mode of 2.0 nm and a small size distribution. The formation mechanism of the NPs was determined using NMR and GC-MS analysis of the species involved. Our SrHfO3 nanoparticles had a dielectric constant of 17, which is on par with literature data for bulk and thin film samples, and they also had a relatively large capacitance of 9.5 nF cm(-2). As such, they would be suitable for applications as gate dielectrics for capacitors and in metal-oxide semiconductor field-effect transistor (MOSFET) technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Titania-coated gold nanorods with expanded photocatalytic response. Enzyme-like glucose oxidation under near-infrared illumination

  • Ortega-Liebana, M.C.
  • Hueso Martos, José Luis
  • Arenal, R.
  • Santamaria, J.
Gold nanorods coated with a uniform titanium dioxide nanoshell have been prepared and used as glucose-oxidase surrogates. Remarkably, this core-shell photocatalytic nanostructure has been able to induce complete oxidation of glucose at near room temperature (32-34 °C) in a wide range of pH values with the aid of a near-infrared (NIR) irradiation source. In contrast, the uncoated gold nanorods exhibit negligible photo-oxidation response under identical experimental conditions thereby proving the photoactivity of the titania shell towards glucose oxidation. The process takes place via in situ photo-generation of singlet oxygen or hydroxyl radicals as reactive oxidative species (ROS). This underlines the role played by the core nanorods as plasmonic light harvesters in the NIR range and constitutes the first example of a NIR-activated enzyme-like catalyst.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

3D Visualization of the Iron Oxidation State in FeO/Fe3O4 Core-Shell Nanocubes from Electron Energy Loss Tomography

  • Torruella, Pau
  • Arenal, Raúl|||0000-0002-2071-9093
  • Peña, Francisco de la
  • Saghi, Zineb|||0000-0002-8895-8410
  • Yedra Cardona, Lluís|||0000-0003-1818-9836
  • Eljarrat Ascunce, Alberto
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Nogués, Josep|||0000-0003-4616-1371
  • Ducati, Caterina
  • Midgley, Paul A.
  • Peiro, Francesca|||0000-0002-5697-0554
  • Estrade, Sonia|||0000-0002-3340-877X
The physicochemical properties used in numerous advanced nanostructured devices are directly controlled by the oxidation states of their constituents. In this work we combine electron energy-loss spectroscopy, blind source separation, and computed tomography to reconstruct in three dimensions the distribution of Fe and Fe ions in a FeO/FeO core/shell cube-shaped nanoparticle with nanometric resolution. The results highlight the sharpness of the interface between both oxides and provide an average shell thickness, core volume, and average cube edge length measurements in agreement with the magnetic characterization of the sample.