Pasar al contenido principal

-

CSD2009-00013

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00013

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE CADIZ
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00013

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00013

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00013

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE BARCELONA
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00013

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Electronic and Magnetic Reconstructions in La0.7Sr0.3MnO3/SrTiO3 Heterostructures: A Case of Enhanced Interlayer Coupling Controlled by the Interface

  • Bruno, Flavio Yair
  • García Barriocanal, Javier
  • Varela Del Arco, María
  • Nemes, Norbert Marcel
  • Thakur, Pardeep
  • Cezar, Julio Criginski
  • Brookes, Nicholas B.
  • Rivera Calzada, Alberto Carlos
  • García Hernández, Mar
  • León Yebra, Carlos
  • Okamoto, Satoshi
  • Pennycook, Stephen J.
  • Santamaría Sánchez-Barriga, Jacobo
We report on the magnetic coupling of La0.7Sr0.3MnO3 layers through SrTiO3 spacers in La0.7Sr0.3MnO3/SrTiO3 epitaxial heterostructures. Combined aberration-corrected microscopy and electron-energy-loss spectroscopy evidence charge transfer to the empty conduction band of the titanate. Ti d electrons interact via superexchange with Mn, giving rise to a Ti magnetic moment as demonstrated by x-ray magnetic circular dichroism. This induced magnetic moment in the SrTiO3 controls the bulk magnetic and transport properties of the superlattices when the titanate layer thickness is below 1 nm.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Upper limit to magnetism in LaAlO_3/SrTiO_3 heterostructures

  • Fitzsimmons, Michael
  • Hengartner, Nicolas
  • Singh, Surendra
  • Zhernenkov, Mikhail
  • Bruno, Flavio Yair
  • Santamaría Sánchez-Barriga, Jacobo
  • Brinkman, Alexander
  • Huijben, Mark
  • Molegraaf, Hajo
  • de la Venta, Jose
  • Schuller, Ivan K.
Using polarized neutron reflectometry we measured the neutron spin-dependent reflectivity from four LaAlO3/SrTiO3 superlattices. Our results imply that the upper limit for the magnetization averaged over the lateral dimensions of the sample induced by an 11 T magnetic field at 1.7 K is less than 2 G. SQUID magnetometry of the neutron superlattice samples sporadically finds an enhanced moment, possibly due to experimental artifacts. These observations set important restrictions on theories which imply a strongly enhanced magnetism at the interface between LaAlO3 and SrTiO3.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Anisotropic magnetotransport in SrTiO3 surface electron gases generated by Ar+ irradiation

  • Bruno, Flavio Yair
  • Tornos Castillo, Javier
  • Gutiérrez del Olmo, M.
  • Sánchez Santolino, Gabriel
  • Nemes, Norbert Marcel
  • León Yebra, Carlos
  • Santamaría Sánchez-Barriga, Jacobo
Metallic surface layers are fabricated by doping (100) SrTiO3 (STO) single crystals with oxygen vacancies generated by bombardment with Ar ions from an rf plasma source. The presence of oxygen vacancies is confirmed by cathodoluminescence and x-ray photoemission spectroscopy. This technique produces a surface electron gas with high values of the sheet carrier density (n2D = 2.45×1017 cm−2). A strong increase (300%) of the low-temperature magnetoresistance is observed when the magnetic field is rotated away from the surface, characteristic of orbital effects of confined electrons. We estimate the width of the confinement region to be in the 200–300 nm range. When a magnetic field is applied in the surface plane and parallel to the current direction, a large negative magnetoresistance is found below the structural transition of the STO, which is discussed in terms of spin-orbit scattering. On further reduction of temperature, there is a change to a positive magnetoresistance regime due to the scattering of charge carriers at the disordered surface region.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Galvanic replacement onto complex metal-oxide nanoparticles, impact of water or other oxidizers in the formation of either fully dense onion-like or multicomponent hollow MnOx/FeOx structures

  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Torruella Besa, Pau|||0000-0002-6864-4000
  • Petrecca, Michele|||0000-0002-4895-0254
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Puntes, Víctor|||0000-0001-8996-9499
  • Nogués, Josep|||0000-0003-4616-1371
Multicomponent metal-oxide nanoparticles are appealing structures from applied and fundamental viewpoints. The control on the synthetic parameters in colloidal chemistry allows the growth of complex nanostructures with novel morphologies. In particular, the synthesis of biphase metal-oxide hollow nanoparticles has been reported based on galvanic replacement using an organic-based seeded-growth approach, but with the presence of HO. Here we report a novel route to synthesize either fully dense or hollow core/shell metal-oxide nanoparticles (MnO/FeO) by simply adding or not oxidants in the reaction. We demonstrate that the presence of oxidants (e.g., O carried by the not properly degassed HO or (CH)NO) allows the formation of hollow structures by a galvanic reaction between the MnO and FeO phases. In particular, the use of (CH)NO as oxidant allows for the first time a very reliable all-organic synthesis of hollow MnO/FeO nanoparticles without the need of water (with a somewhat unreliable oxidation role). Oxidants permit the formation of MnO/FeO hollow nanoparticles by an intermediate step where the MnO/MnO seeds are oxidized into MnO, thus allowing the Mn → Mn reduction by the Fe ions. The lack of proper oxidative conditions leads to full-dense onion-like core/shell MnO/MnO/FeO particles. Thus, we show that the critical step for galvanic replacement is the proper seed oxidation states so that their chemical reduction by the shell ions is thermodynamically favored.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The promotional effect of Sn-beta zeolites on platinum for the selective hydrogenation of alpha,beta-unsaturated aldehydes

  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Perez, Yolanda
  • Hernandez-Garrido, J. C.
  • Fajardo, Mariano
  • Calvino, J. J.
Pt impregnated on a Sn-beta catalyst results in a very promising catalyst for the selective hydrogenation of alpha,beta-unsaturated aldehydes, compared to the PtSn co-impregnated beta catalysts. Framework tin ions in the Sn-beta sample stabilize the nucleation of platinum nanoparticles inside the zeolite channel. These Pt-0-Sn4+ sites, which are only observed in the Pt/Sn-beta catalyst, have been shown to strongly activate the carbonyl group enhancing the hydrogenation rate of the C=O bond., Financial support by the Spanish MICINN (MAT2009-14528-C02-01) and CONSOLIDER Ingenio 2010-MULTICAT is gratefully acknowledged. JCHG and JJCG acknowledge financial support from the Ministry of Science and Innovation of Spain/FEDER Program of the EU (Projects MAT2008-00889-NAN and CSD2009-00013). The Electron Microscopy Division of SCCYT at Cadiz University is also acknowledged.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Evaluation of high-quality image reconstruction techniques applied to high-resolution Z-contrast imaging

  • Barcena González, Guillermo
  • Guerrero Lebrero, María de la Paz
  • Guerrero Vázquez, Elisa
  • Yañez Escolano, Andrés
  • Fernández de los Reyes, Daniel
  • González Robledo, David
  • Galindo Riaño, Pedro Luis
High-quality image reconstruction techniques allow the generation of high pixel density images from a set of low-resolution micrographs. In general, these techniques consist of two main steps, namely, accurate registration, and formulation of an appropriate forward image model via some restoration method. There exist a wide variety of algorithms to cope with both stages and depending on their practical applications, some methods can outperform others, since they can be sensitive to the assumed data model, noise, drift, etc. When dealing with images generated by Z-contrast scanning transmission electron microscopes, a current trend is based on non-rigid approximations in the registration stage. In our work we aimed at reaching similar accuracy but addressing the most complex calculations in the reconstruction stage, instead of in the registration stage (as the non-rigid approaches do), but using a much smaller number of images. We review some of the most significant methods and address their shortcomings when they are applied to the field of microscopy. Simulated images with known targets will be used to evaluate and compare the main approaches in terms of quality enhancement and computing time. In addition, a procedure to determine the reference image will be proposed to minimise the global drift on the series. The best registration and restoration strategies will be applied to experimental images in order to point up the enhanced capability of this high quality image reconstruction methodology in this field.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Direct sub-nanometer scale electron microscopy analysis of anion incorporation to self-ordered anodic alumina layers

  • González Rovira, Leandro
  • López Haro, Miguel
  • Hungría Hernández, Ana Belén
  • El Amrani, K.
  • Sánchez Amaya, José María
  • Calvino Gámez, José Juan
  • Botana Pedemonte, Francisco Javier
Ordered porous alumina layers prepared by two-step anodising in phosphoric, oxalic and sulphuric acids have been characterized at sub-nanometer scale using electron microscopy techniques. FEG-SEM and STEM-HAADF images allowed estimating the pore size, cell wall and pore wall thicknesses of the layers. Nanoanalytical characterization has been performed by STEM-EELS and STEM-X-EDS. Detailed features of the spatial distribution of anions in the pore wall of the films have been obtained. Maximum concentration of P-species occurs, approximately, at the middle of the pore wall; adjacent to the pore for C-species, whereas the distribution of S-species appears to be uniform.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Strain mapping accuracy improvement using super-resolution techniques

  • Barcena González, Guillermo
  • Guerrero Lebrero, María de la Paz
  • Guerrero Vázquez, Elisa
  • Fernández de los Reyes, Daniel
  • González Robledo, David
  • Mayoral, Álvaro
  • Utrilla, Antonio D.
  • Ulloa, José María
  • Galindo Riaño, Pedro Luis
Super-resolution (SR) software-based techniques aim at generating a final image by combining several noisy frames with lower resolution from the same scene. A comparative study on high-resolution high-angle annular dark field images of InAs/GaAs QDs has been carried out in order to evaluate the performance of the SR technique. The obtained SR images present enhanced resolution and higher signal-to-noise (SNR) ratio and sharpness regarding the experimental images. In addition, SR is also applied in the field of strain analysis using digital image processing applications such as geometrical phase analysis and peak pairs analysis. The precision of the strain mappings can be improved when SR methodologies are applied to experimental images.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal diffusion at nanoscale: From CoAu alloy nanoparticles to Co@Au core/shell structures

  • Llamosa Pérez, Daniel
  • Espinosa, Ana
  • Martínez Orellana, Lidia
  • Román García, Elisa Leonor
  • Ballesteros Pérez, Carmen Inés
  • García-Hernández, Mar
  • Huttel, Yves
[EN] The thermal-induced diffusion at nanoscale is investigated through the detailed study of the structural and magnetic properties of Co@Au nanoparticles as a function of the deposition temperature. Nanoparticles of 10 nm were fabricated using an ion cluster source from a Co95Au5 target. While low-temperature deposition leads to the formation of an alloyed fcc CoAu core with an incomplete cobalt oxide shell, higher deposition temperature induces the formation of a pure hcp Co core with an intermediate Au shell and a compact outer cobalt oxide shell. The evolution of the magnetic properties of the nanoparticles is presented and discussed in light of the structural changes of the nanoparticles upon deposition temperature and nanoparticle density. It is found that thermal-induced diffusion can be successfully used to tune the structural and magnetic properties at the nanoscale in CoAu nanoparticles. © 2013 American Chemical Society., Work was supported by the Spanish Ministerio de Ciencia e Innovación under projects MAT2008-06765-C02, MAT2011-29194-C02-02, MAT2011-27470-C02-02, CSD2007-00041 (NANOSELECT), and CSD2009-00013 (IMAGINE). D. Llamosa P. acknowledges financial support from Ministerio de Ciencia e Innovación under contract n° JAEPre-09-01925. L.M. and E.R. acknowledge the Consejo Superior de Investigaciones Cientifícas (PIE 201160E085)., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Twinning-, polytypism-, and polarity-induced morphological modulation in nonplanar nanostructures with van der Waals Epitaxy

  • Utama, Muhammad Iqbal Bakti
  • Mata, María de la
  • Magen, Cesar
  • Arbiol, Jordi
  • Xiong, Qihua
Twinning, polytypism, and polarity are important aspects in nanostructural growth since their presence can affect various properties of the as-grown products. The morphology of nanostructures grown via van der Waals epitaxy is shown to be strongly influenced by the twinning density and the presence of polytypism within the nanostructures, while the growth direction is driven by the compound polarity. With ZnTe as the model material, vertically aligned nanorods are successfully produced with variable cross-section and branched crystals (tripods and tetrapods) on only a single type of substrate. Van der Waals epitaxy contributes by relaxing the lattice-mismatch requirements for epitaxial growth and by enabling a variety of crystal planes in the initial stages of the growth to be interfaced to the substrate, regardless of the polarity of the epitaxial material. These results may provide more flexibility in tuning rationally the morphology of epitaxial nanostructures into other shapes with higher complexity by routine adjustment of growth environment. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim., M.I.B.U. and M.d.l.M. contributed equally to this work. Q.X. acknowledges the strong support from the Singapore National Research Foundation through a fellowship grant (NRF-RF2009-06), and from Nanyang Technological University through a generous start-up grant (M58110061) and the New Initiative Fund (M58110100). J.A. acknowledges funding from the Spanish MICINN projects MAT2010-15138 (COPEON) and CSD2009-00013 (IMAGINE) and Generalitat de Catalunya (2009 SGR 770 and NanoAraCat). The authors thank the staff at the TEM facilities at INA-LMA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polarity assignment in ZnTe, GaAs, ZnO, and GaN-AlN nanowires from direct dumbbell analysis

  • Mata, María de la
  • Magen, Cesar
  • Gazquez, Jaume
  • Utama, Muhammad Iqbal Bakti
  • Heiss, Martin
  • Lopatin, Sergei
  • Furtmayr, Florian
  • Fernández-Rojas, Carlos J
  • Peng, Bo
  • Morante, Joan Ramon
  • Rurali, Riccardo
  • Eickhoff, Martin
  • Fontcuberta i Morral, Anna
  • Xiong, Qihua
  • Arbiol, Jordi
Aberration corrected scanning transmission electron microscopy (STEM) with high angle annular dark field (HAADF) imaging and the newly developed annular bright field (ABF) imaging are used to define a new guideline for the polarity determination of semiconductor nanowires (NWs) from binary compounds in two extreme cases: (i) when the dumbbell is formed with atoms of similar mass (GaAs) and (ii) in the case where one of the atoms is extremely light (N or O: ZnO and GaN/AlN). The theoretical fundaments of these procedures allow us to overcome the main challenge in the identification of dumbbell polarity. It resides in the separation and identification of the constituent atoms in the dumbbells. The proposed experimental via opens new routes for the fine characterization of nanostructures, e.g., in electronic and optoelectronic fields, where the polarity is crucial for the understanding of their physical properties (optical and electronic) as well as their growth mechanisms., This work was partially supported by the Spanish Project Consolider Ingenio CSD2009 00013 IMAGINE and CSD2009 00050 MULTICAT. J.A. acknowledges the funding from the Spanish MICINN Projects MAT2010-15138 and MAT2010-21510 and Generalitat de Catalunya (2009 SGR 770, NanoAraCat and XaRMAE). M.H. and A.F.i.M. thank funding through the ERC starting Grant “Upcon”, the SNF through Project No. 129775/1, and the NCCR “Quantum Science and Technology”. Q.X. acknowledges the funding support of this work from Singapore National Research Foundation through NRF fellowship grant (NRF-RF2009-06) and additional start-up grant support (M58113004) from Nanyang Technological University. R.R. acknowledges funding under Contract Nos. 200950I164, TEC2009-06986, FIS2009-12721-C04-03, and CSD2007-00041. M.E. and F.F. thank funding from the EU via the Project DOTSENSE (FP7, Grant No. 224212)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The growth of ultralong ZnTe micro/nanostructures: The influence of polarity and twin direction on the morphogenesis of nanobelts and nanosheets

  • Utama, Muhammad Iqbal Bakti
  • Mata, María de la
  • Zhang, Qing
  • Magén, César
  • Arbiol, Jordi
  • Xiong, Qihua
Although ZnTe nanobelts present an intriguing platform to study various optical properties and phenomena in semiconductors, there was very limited study regarding the crystalline structure and defects of ZnTe nanobelts. Here, we correlate the structural properties and features in the crystal of ZnTe nanobelts with the resulting as-synthesized morphology. Ultralong ZnTe nanobelts were synthesized to reach the subcentimeter length scale. Two types of nanobelts were identified according to whether tapering was present and discerned on the basis of crystallinity and polarity of the structure. We conclude that tapered sheetlike nanobelts have Te-terminated lateral facets that induced lateral growth, whereas untapered nanobelts have facets that are nonpolar and nonreactive. Axial and transversal twins were also observed, where the polarity was conserved across twinning boundaries. © 2013 American Chemical Society., Q.X. acknowledges the strong support from Singapore National Research Foundation via a fellowship grant (NRF-RF2009-06) and Ministry of Education via two Tier2 grants (MOE2011-T2-2-051 and MOE2012-T2-2-086). This research is also supported, in part, by the start-up grant (M58110061) and the New Initiative Fund (M58110100) from Nanyang Technological University. J.A. acknowledges the funding from the Spanish MICINN projects MAT2010-15138 (COPEON) and CSD2009-00013 (IMAGINE) and Generalitat de Catalunya (2009 SGR 770 and NanoAraCat). M.d.l.M. thanks CSIC JAE Pre-Doc program. The authors thank the TEM facilities at the Universitat de Barcelona and INA-LMA at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

A review of MBE grown 0D, 1D and 2D quantum structures in a nanowire

  • Mata, María de la
  • Zhou, Xiang
  • Furtmayr, Florian
  • Teubert, Jörg
  • Gradečak, Silvija
  • Eickhoff, Martin
  • Fontcuberta Morral, Anna
  • Arbiol, Jordi
We review different strategies to achieve a three-dimensional energy bandgap modulation in a nanowire (NW) by the introduction of self-assembled 0D, 1D and 2D quantum structures, quantum dots (QDs), quantum wires (QWRs) and quantum wells (QWs). Starting with the well-known axial, radial (coaxial/prismatic) or polytypic quantum wells in GaN/AlN, GaAs/AlAs or wurtzite/zinc-blende systems, respectively, we move to more sophisticated structures by lowering their dimensionality. New recent approaches developed for the self-assembly of GaN quantum wires and InAs or AlGaAs quantum dots on single nanowire templates are reported and discussed. Aberration corrected scanning transmission electron microcopy is presented as a powerful tool to determine the structure and morphology at the atomic scale allowing for the creation of 3D atomic models that can help us to understand the enhanced optical properties of these advanced quantum structures. © 2013 The Royal Society of Chemistry., This work was supported by the Spanish MICINN projects MAT2010-15138 (COPEON) and CSD2009-00013 (IMAGINE), and Generalitat de Catalunya projects NanoAraCat, 2009-SGR-770 and XaRMAE. XZ and SG acknowledge support by the Center for Excitonics, an Energy Frontier Research Center funded by the US Department of Energy, Office of Basic Energy Sciences under Award number DE-SC0001088. MdlM thanks the CSIC JAE Pre-Doc program. AFiM acknowledges funding from SNF through NCCR-QSIT and grant no. 134506., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interfacial effects on the tunneling magnetoresistance in La0.7 S r0.3Mn O3/MgO/Fe tunneling junctions

  • Galceran, R.
  • Balcells, L.
  • Martinez-Boubeta, C.
  • Bozzo, B.
  • Cisneros-Fernández, J.
  • Mata, De La
  • Magén, C.
  • Arbiol, J.
  • Tornos, J.
  • Cuellar, F.A.
  • Sefrioui, Z.
  • Cebollada, A.
  • Golmar, F.
  • Hueso, L.E.
  • Casanova, F.
  • Santamaría, J.
  • Martinez, B.
We report on magnetotransport properties on La0.7Sr0.3MnO3/MgO/Fe tunnel junctions grown epitaxially on top of (001)-oriented SrTiO3 substrates by sputtering. It is shown that the magnetoresistive response depends critically on the MgO/Fe interfacial properties. The appearance of an FeOX layer by the interface destroys the ¿1 symmetry filtering effect of the MgO/Fe system and only a small negative tunneling magnetoresistance (TMR) (~-3%) is measured. However, in annealed samples a switchover from positive TMR (~+25% at 70 K) to negative TMR (~-1%) is observed around 120 K. This change is associated with the transition from semiconducting at high T to insulating at low T taking place at the Verwey transition (TV~120K) in Fe3O4, thus suggesting the formation of a very thin slab of magnetite at the MgO/Fe interface during annealing treatments. These results highlight the relevance of interfacial properties on the tunneling conduction process and how it can be substantially modified through appropriate interface engineering.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Mapping chemical disorder and ferroelectric distortions in the double perovskite compound Sr2-xGdxMnTiO6 by atomic resolution electron microscopy and spectroscopy

  • Biskup Zaja, Nevenko
  • Álvarez Serrano, Inmaculada
  • Veiga, María
  • Rivera Calzada, Alberto Carlos
  • Garcia Hernandez, Mar
  • Pennycook, Stephen J.
  • Varela Del Arco, María
In this work we report a study of the chemical and structural order of the double perovskite compound Sr2-xGdxMnTiO6 for compositions x = 0, 0.25, 0.5, 0.75, and 1. A noticeable disorder at the B-site in the Mn and Ti sublattice is detected at the atomic scale by electron energy-loss spectroscopy for all x values, resulting in Mn-rich and Ti-rich regions. For x >= 0.75, the cubic unit cell doubles and lowers its symmetry because of structural rearrangements associated with a giant ferroelectric displacement of the perovskite B-site cation. We discuss this finding in the light of the large electroresistance observed in Sr2-xGdxMnTiO6, x >= 0.75.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Electron Doping by Charge Transfer at LaFeO_3 /Sm_2CuO_4 Epitaxial Interfaces

  • Bruno, Flavio Yair
  • Schmidt, Rainer
  • Varela Del Arco, María
  • Garcia Barriocanal, Javier
  • Rivera Calzada, Alberto Carlos
  • Cuéllar Jiménez, Fabian Andrés
  • León Yebra, Carlos
  • Thakur, Pardeep
  • Cezar, Julio
  • Brookes, Nicholas
  • García Hernández, Mar
  • Dagotto, Elbio
  • Pennycook, Stephen
  • Santamaría Sánchez-Barriga, Jacobo
Using X-ray absorption spectroscopy and electron energy loss spectroscopy with atomic-scale spatial resolution, experimental evidence for charge transfer at the interface between the Mott insulators Sm2CuO4 and LaFeO3 is obtained. As a consequence of the charge transfer, the Sm2CuO4 is doped with electrons and thus epitaxial Sm2CuO4/LaFeO3 heterostructures become metallic.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Origin of the large dispersion of magnetic properties in nanostructured oxides: FexO/Fe3O4 nanoparticles as a case study

  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Golosovsky, I. V.
  • Estrade, Sonia|||0000-0002-3340-877X
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • López-Conesa, Lluís
  • Tobia, Dina
  • Winkler, Elin
  • Ardisson, José D.
  • Macedo, Waldemar A. A.
  • Morphis, Andreas
  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Gukasov, Arsen|||0000-0003-2763-468X
  • Mirebeau, Isabelle
  • Makarova, O. L.
  • Zysler, Roberto D.
  • Peiro, Francesca|||0000-0002-5697-0554
  • Baró, M. D.|||0000-0002-8636-1063
  • Bergström, Lennart
  • Nogués, Josep|||0000-0003-4616-1371
The intimate relationship in transition-metal oxides between stoichiometry and physiochemical properties makes them appealing as tunable materials. These features become exacerbated when dealing with nanostructures. However, due to the complexity of nanoscale materials, establishing a distinct relationship between structure-morphology and functionalities is often complicated. In this regard, in the FexO/Fe3O4 system a largely unexplained broad dispersion of magnetic properties has been observed. Here we show, thanks to a comprehensive multi-technique approach, a clear correlation between magneto-structural properties in large (45 nm) and small (9 nm) FexO/Fe3O4 core/shell nanoparticles that can explain the spread of magnetic behaviors. The results reveal that while the FexO core in the large nanoparticles is antiferromagnetic and has bulk-like stoichiometry and unit-cell parameters, the FexO core in the small particles is highly non-stoichiometric and strained, displaying no significant antiferromagnetism. These results highlight the importance of ample characterization to fully understand the properties of nanostructured metal oxides.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tailoring staircase-like hysteresis loops in electrodeposited trisegmented magnetic nanowires, a strategy toward minimization of interwire interactions

  • Zhang, Jin
  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Baró, M. D.|||0000-0002-8636-1063
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A new strategy to minimize magnetic interactions between nanowires (NWs) dispersed in a fluid is proposed. Such a strategy consists of preparing trisegmented NWs containing two antiparallel ferromagnetic segments with dissimilar coercivity separated by a nonmagnetic spacer. The trisegmented NWs exhibit a staircase-like hysteresis loop with tunable shape that depends on the relative length of the soft- and hard-magnetic segments and the respective values of saturation magnetization. Such NWs are prepared by electrodepositing CoPt/Cu/Ni in a polycarbonate (PC) membrane. The antiparallel alignment is set by applying suitable magnetic fields while the NWs are still embedded in the PC membrane. Analytic calculations are used to demonstrate that the interaction magnetic energy from fully compensated trisegmented NWs with antiparallel alignment is reduced compared to a single-component NW with the same length or the trisegmented NWs with the two ferromagnetic counterparts parallel to each other. The proposed approach is appealing for the use of magnetic NWs in certain biological or catalytic applications where the aggregation of NWs is detrimental for optimized performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electron energy-loss spectroscopic tomography of FeₓCo(₃₋ₓ)O₄ impregnated Co₃O₄ mesoporous particles, unraveling the chemical information in three dimensions

  • Yedra Cardona, Lluís|||0000-0003-1818-9836
  • Eljarrat Ascunce, Alberto
  • Arenal, Raúl|||0000-0002-2071-9093
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Pellicer, Eva|||0000-0002-8901-0998
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Sort, Jordi|||0000-0003-1213-3639
  • Baró, M. D.|||0000-0002-8636-1063
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiró, Francisca
Electron energy-loss spectroscopy - spectrum image (EELS-SI) tomography is a powerful tool to investigate the three dimensional chemical configuration in nanostructures. Here, we demonstrate, for the first time, the possibility to characterize the spatial distribution of Fe and Co cations in a complex FFeₓCo(₃₋ₓ)O₄/Co₃O₄ ordered mesoporous system. This hybrid material is relevant because of the ferrimagnetic/antiferromagnetic coupling and high surface area. We unambiguously prove that the EELS-SI tomography shows a sufficiently high resolution to simultaneously unravel the pore structure and the chemical signal.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

3D Visualization of the Iron Oxidation State in FeO/Fe3O4 Core-Shell Nanocubes from Electron Energy Loss Tomography

  • Torruella, Pau
  • Arenal, Raúl|||0000-0002-2071-9093
  • Peña, Francisco de la
  • Saghi, Zineb|||0000-0002-8895-8410
  • Yedra Cardona, Lluís|||0000-0003-1818-9836
  • Eljarrat Ascunce, Alberto
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Nogués, Josep|||0000-0003-4616-1371
  • Ducati, Caterina
  • Midgley, Paul A.
  • Peiro, Francesca|||0000-0002-5697-0554
  • Estrade, Sonia|||0000-0002-3340-877X
The physicochemical properties used in numerous advanced nanostructured devices are directly controlled by the oxidation states of their constituents. In this work we combine electron energy-loss spectroscopy, blind source separation, and computed tomography to reconstruct in three dimensions the distribution of Fe and Fe ions in a FeO/FeO core/shell cube-shaped nanoparticle with nanometric resolution. The results highlight the sharpness of the interface between both oxides and provide an average shell thickness, core volume, and average cube edge length measurements in agreement with the magnetic characterization of the sample.