Pasar al contenido principal

-

IJCI-2014-21530

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Juan de la Cierva Incorporación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario ASOC CIC NANOGUNE
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Galvanic replacement onto complex metal-oxide nanoparticles, impact of water or other oxidizers in the formation of either fully dense onion-like or multicomponent hollow MnOx/FeOx structures

  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Torruella Besa, Pau|||0000-0002-6864-4000
  • Petrecca, Michele|||0000-0002-4895-0254
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Puntes, Víctor|||0000-0001-8996-9499
  • Nogués, Josep|||0000-0003-4616-1371
Multicomponent metal-oxide nanoparticles are appealing structures from applied and fundamental viewpoints. The control on the synthetic parameters in colloidal chemistry allows the growth of complex nanostructures with novel morphologies. In particular, the synthesis of biphase metal-oxide hollow nanoparticles has been reported based on galvanic replacement using an organic-based seeded-growth approach, but with the presence of HO. Here we report a novel route to synthesize either fully dense or hollow core/shell metal-oxide nanoparticles (MnO/FeO) by simply adding or not oxidants in the reaction. We demonstrate that the presence of oxidants (e.g., O carried by the not properly degassed HO or (CH)NO) allows the formation of hollow structures by a galvanic reaction between the MnO and FeO phases. In particular, the use of (CH)NO as oxidant allows for the first time a very reliable all-organic synthesis of hollow MnO/FeO nanoparticles without the need of water (with a somewhat unreliable oxidation role). Oxidants permit the formation of MnO/FeO hollow nanoparticles by an intermediate step where the MnO/MnO seeds are oxidized into MnO, thus allowing the Mn → Mn reduction by the Fe ions. The lack of proper oxidative conditions leads to full-dense onion-like core/shell MnO/MnO/FeO particles. Thus, we show that the critical step for galvanic replacement is the proper seed oxidation states so that their chemical reduction by the shell ions is thermodynamically favored.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomic-scale determination of cation inversion in spinel-based oxide nanoparticles

  • Torruella, Pau
  • Ruiz-Caridad, Alicia
  • Walls, Michael
  • Roca, Alejandro G.
  • López-Ortega, Alberto
  • Blanco-Portals, Javier
  • López-Conesa, Lluís
  • Nogués, Josep
  • Peiró, Francesca
  • Estradé, Sònia
The atomic structure of nanoparticles can be easily determined by transmission electron microscopy. However, obtaining atomic-resolution chemical information about the individual atomic columns is a rather challenging endeavor. Here, crystalline monodispersed spinel Fe3O4/Mn3O4 core–shell nanoparticles have been thoroughly characterized in a high-resolution scanning transmission electron microscope. Electron energy-loss spectroscopy (EELS) measurements performed with atomic resolution allow the direct mapping of the Mn2+/Mn3+ ions in the shell and the Fe2+/Fe3+ in the core structure. This enables a precise understanding of the core–shell interface and of the cation distribution in the crystalline lattice of the nanoparticles. Considering how the different oxidation states of transition metals are reflected in EELS, two methods of performing a local evaluation of the cation inversion in spinel lattices are introduced. Both methods allow the determination of the inversion parameter in the iron oxide core and manganese oxide shell, as well as detecting spatial variations in this parameter, with atomic resolution. X-ray absorption measurements on the whole sample confirm the presence of cation inversion. These results present a significant advance toward a better correlation of the structural and functional properties of nanostructured spinel oxides., The authors acknowledge funding from the Spanish Ministerio de Economía y Competitividad (MINECO) through the projects MAT2016-77391-R and MAT2016-79455-P/FEDER (UE). This work has also been carried out in the framework of the projects 2017-SGR-292 and 2017-SGR-776 from the Generalitat de Catalunya. A.L.O. acknowledges the MINECO through the Juan de la Cierva Program (IJCI-2014-21530). M.W. acknowledges the European Union Seventh Framework Programme under grant agreement no. 312483-ESTEEM2. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Program (MINECO, grant SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining X-ray whole powder pattern modeling, rietveld and pair distribution function analyses as a novel bulk approach to study interfaces in heteronanostructures: Oxidation front in FeO/Fe3O4 core/shell nanoparticles as a case study

  • Ichikawa, Rodrigo U.
  • Roca, Alejandro G.
  • López-Ortega, Alberto
  • Estrader, Marta
  • Peral, Inmaculada
  • Turrillas, Xabier M.
  • Nogués, Josep
Understanding the microstructure in heterostructured nanoparticles is crucial to harnessing their properties. Although microscopy is ideal for this purpose, it allows for the analysis of only a few nanoparticles. Thus, there is a need for structural methods that take the whole sample into account. Here, a novel bulk‐approach based on the combined analysis of synchrotron X‐ray powder diffraction with whole powder pattern modeling, Rietveld and pair distribution function is presented. The microstructural temporal evolution of FeO/Fe3O4 core/shell nanocubes is studied at different time intervals. The results indicate that a two‐phase approach (FeO and Fe3O4) is not sufficient to successfully fit the data and two additional interface phases (FeO and Fe3O4) are needed to obtain satisfactory fits, i.e., an onion‐type structure. The analysis shows that the Fe3O4 phases grow to some extent (≈1 nm) at the expense of the FeO core. Moreover, the FeO core progressively changes its stoichiometry to accommodate more oxygen. The temporal evolution of the parameters indicates that the structure of the FeO/Fe3O4 nanocubes is rather stable, although the exact interface structure slightly evolves with time. This approach paves the way for average studies of interfaces in different kinds of heterostructured nanoparticles, particularly in cases where spectroscopic methods have some limitations., R.U.I. acknowledges CAPES and CNPq (No. 206983/2014‐0) Brazilian agencies. A.G.R. and J.N. thanks the support of the Generalitat de Catalunya through the 2017‐SGR‐292 project and the Beatriu de Pinos Program (2011 BPB 00209) and the Spanish Ministerio de Economía y Competitividad (MINECO) through the MAT2016‐77391‐R project. I.P. was supported by the National Research Fund of Luxembourg (Grant No. FNR‐Inter2015/LRSF). A.L.‐O. acknowledges the MINECO through the Juan de la Cierva Program (IJCI‐2014‐21530). X.T. would like to acknowledge the financial support from the MINECO projects MAT2015‐67593‐P and BIA2014‐57658‐C2‐1‐R. The ALBA Synchrotron is acknowledged for the provision of beamtime and the MSPD beamline staff is for their help during the XRD measurements. Dr. Luis G. Martinez from IPEN/CNEN is acknowledged for useful discussions about XRD techniques. Dr. Paolo Scardi from Università degli Studi di Trento is acknowledged for the helpful discussions about WPPM and for providing PM2K v.3 software. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV‐2013‐0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced ultrafast nonlinear optical response in ferrite core/shell nanostructures with excellent optical limiting performance

  • Perumbilavil, Sreekanth
  • López-Ortega, Alberto
  • Kumar Tiwari, Gaurav
  • Nogués, Josep
  • Endo, Tamio
  • Philip, Reji
Nonlinear optical nanostructured materials are gaining increased interest as optical limiters for various applications, although many of them suffer from reduced efficiencies at high‐light fluences due to photoinduced deterioration. The nonlinear optical properties of ferrite core/shell nanoparticles showing their robustness for ultrafast optical limiting applications are reported. At 100 fs ultrashort laser pulses the effective two‐photon absorption (2PA) coefficient shows a nonmonotonic dependence on the shell thickness, with a maximum value obtained for thin shells. In view of the local electric field confinement, this indicates that core/shell is an advantageous morphology to improve the nonlinear optical parameters, exhibiting excellent optical limiting performance with effective 2PA coefficients in the range of 10−12 cm W−1 (100 fs excitation), and optical limiting threshold fluences in the range of 1.7 J cm−2. These values are comparable to or better than most of the recently reported optical limiting materials. The quality of the open aperture Z‐scan data recorded from repeat measurements at intensities as high as 35 TW cm−2, indicates their considerably high optical damage thresholds in a toluene dispersion, ensuring their robustness in practical applications. Thus, the high photostability combined with the remarkable nonlinear optical properties makes these nanoparticles excellent candidates for ultrafast optical limiting applications., The authors acknowledge the support of the 2014‐SGR‐1015 project of the Generalitat de Catalunya. A.L.‐O. acknowledges the Spanish Ministrio de Economía y Competitividad through the Juan de la Cierva Program (Grant No. IJCI‐2014‐21530). ICN2 is founded by the CERCA Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV‐2013‐0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unravelling the elusive antiferromagnetic order in Wurtzite and zinc blende CoO polymorph nanoparticles

  • Roca, Alejandro G.
  • Golosovsky, Igor V.
  • Winkler, Elin
  • López-Ortega, Alberto
  • Estrader, Marta
  • Zysler, Roberto D.
  • Nogués, Josep
Although cubic rock salt-CoO has been extensively studied, the magnetic properties of the main nanoscale CoO polymorphs (hexagonal wurtzite and cubic zinc blende structures) are rather poorly understood. Here, a detailed magnetic and neutron diffraction study on zinc blende and wurtzite CoO nanoparticles is presented. The zinc blende-CoO phase is antiferromagnetic with a 3rd type structure in a face-centered cubic lattice and a Néel temperature of TN (zinc-blende) ≈225 K. Wurtzite-CoO also presents an antiferromagnetic order, TN (wurtzite) ≈109 K, although much more complex, with a 2nd type order along the c-axis but an incommensurate order along the y-axis. Importantly, the overall magnetic properties are overwhelmed by the uncompensated spins, which confer the system a ferromagnetic-like behavior even at room temperature., This work was supported by the 2017-SGR-292 project of the Generalitat de Catalunya. E.W. and R.D.Z. thank ANPCyT and CONICET Argentine for support through Grants No. PICT-2015-0883 and PIP 112–20110100519, respectively. I.V.G. acknowledges the support of the Russian grants RFBR 16-02-00058 and RG 14.B25.31.0025. A.G.R. thanks the Beatriu de Pinos Fellowship (ref 2011 BP_B 00209) and A.L.O. acknowledges the Juan de la Cierva Program (MINECO IJCI-2014-21530). ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 also acknowledges the support from the Severo Ochoa Program (MINECO, Grant No. SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zinc blende and wurtzite CoO polymorph nanoparticles: rational synthesis and commensurate and incommensurate magnetic order

  • Golosovsky, Igor V.
  • Estrader, Marta
  • López-Ortega, Alberto
  • Roca, Alejandro G.
  • López-Conesa, Lluís
  • Del Corro, Elena
  • Estradé, Sònia
  • Peiró, Francesca
  • Puente-Orench, Inés
  • Nogués, Josep
On the nanoscale, CoO can have different polymorph crystal structures, zinc blende and wurtzite, apart from rock salt, which is the stable one in bulk. However, the magnetic structures of the zinc blende and wurtzite phases remain virtually unexplored. Here we discuss some of the main parameters controlling the growth of the CoO wurtzite and zinc blende polymorphs by thermal decomposition of cobalt (II) acetylacetonate. In addition, we present a detailed neutron diffraction study of oxygen deficient CoO (CoO0.70–0.75) nanoparticles with zinc blende (∼15 nm) and wurtzite (∼30 nm) crystal structures to unravel their magnetic order and its temperature evolution. The magnetic order of the zinc blende nanoparticles is antiferromagnetic and appears at the Néel temperature TN ∼ 203 K. It corresponds to the 3rd type of magnetic ordering in a face-centered cubic lattice with magnetic moments aligned along a cube edge. The magnetic structure in the wurtzite nanoparticles turned out to be rather complex with two perpendicular components. One component is incommensurate, of the longitudinal spin wave type, with the magnetic moments confined in the ab-plane. In the perpendicular direction, this magnetic order is uncorrelated, forming quasi-two-dimensional magnetic layers. The component of the magnetic moment, aligned along the hexagonal axis, is commensurate and corresponds to the antiferromagnetic order known as the 2nd type in a wurtzite structure. The Néel temperature of wurtzite phase is estimated to be ∼109 K. The temperature dependence of the magnetic reflections confirms the reduced dimensionality of the incommensurate magnetic order. Incommensurate magnetic structures in nanoparticles are an unusual phenomenon and in the case of wurtzite CoO it is probably caused by structural defects (e.g., vacancies, strains and stacking faults)., This work was supported by the Russian grant RFBR 16-02-00058, the MAT2016-79455-P and MAT2015-68200-C2-2-P projects of the Spanish MINECO and by the 2017 SGR 292 and 2017 SGR 776 projects of the Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme funded by the Spanish Research Agency(AEI, grant no. SEV-2017-0706). ALO acknowledges the Juan de la Cierva Program (MINECO IJCI-2014-21530)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing the meta-stability of oxide core/shell nanoparticle systems at atomic resolution

  • Roldán, Manuel A.
  • Mayence, Arnaud
  • López-Ortega, Alberto
  • Ishikawa, Ryo
  • Salafranca, Juan
  • Estrader, Marta
  • Salazar-Álvarez, G.
  • Baró, María Dolors
  • Nogués, Josep
  • Pennycook, Stephen J.
  • Varela, María
Hybrid nanoparticles allow exploiting the interplay of confinement, proximity between different materials and interfacial effects. However, to harness their properties an in-depth understanding of their (meta)stability and interfacial characteristics is crucial. This is especially the case of nanosystems based on functional oxides working under reducing conditions, which may severely impact their properties. In this work, the in-situ electron-induced selective reduction of Mn3O4 to MnO is studied in magnetic Fe3O4/Mn3O4 and Mn3O4/Fe3O4 core/shell nanoparticles by means of high-resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Such in-situ transformation allows mimicking the actual processes in operando environments. A multi-stage image analysis using geometric phase analysis combined with particle image velocity enables direct monitoring of the relationship between structure, chemical composition and strain relaxation during the Mn3O4 reduction. In the case of Fe3O4/Mn3O4 core/shell the transformation occurs smoothly without the formation of defects. However, for the inverse Mn3O4/Fe3O4 core/shell configuration the electron beam-induced transformation occurs in different stages that include redox reactions and void formation followed by strain field relaxation via formation of defects. This study highlights the relevance of understanding the local dynamics responsible for changes in the particle composition in order to control stability and, ultimately, macroscopic functionality., Research supported by the European Research Council Starting Investigator Award STEMOX # 239739 (M.R. and J. S.), JSPS Postdoctoral Fellowship for Research Abroad (R.I.) and by Spanish MAT2015-066888-C3-3-R and RTI2018-097895-B-C43 (MINECO/FEDER). Electron microscopy observations at Oak Ridge National Laboratory (ORNL) supported by the U.S. Department of Energy (DOE), Basic Energy Sciences (BES), Materials Sciences and Engineering Division and through a user project supported by ORNL’s Center for Nanophase Materials Sciences (CNMS), which is sponsored by the Scientific User Facilities Division, Office of Basic Energy Sciences, U.S. Department of Energy. A.M. and G.S.A. thank the financial support of the Knut and Alice Wallenberg Foundation through the project 3DEM-NATUR. The work at INC2 has been supported by the 2017-SGR-292 project of the Generalitat de Catalunya and by the MAT2016-77391-R project of the Spanish MINECO. ALO acknowledges the Spanish Ministerio de Economía y Competitividad through the Juan de la Cierva Program (IJCI-2014-21530). ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). S. J. P. thanks the National University of Singapore for funding. M. E. Acknowledges the Spanish MINECO for her Ramón y Cajal Fellowship (RYC2018-024396-I)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Combining X-Ray Whole Powder Pattern Modeling, Rietveld and Pair Distribution Function Analyses as a Novel Bulk Approach to Study Interfaces in Heteronanostructures, Oxidation Front in FeO/Fe3O4 Core/Shell Nanoparticles as a Case Study

  • Ichikawa, Rodrigo U.|||0000-0002-7661-9999
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Peral Alonso, Inmaculada|||0000-0002-6994-1277
  • Turrillas, Xabier|||0000-0002-3419-2229
  • Nogués, Josep|||0000-0003-4616-1371
Understanding the microstructure in heterostructured nanoparticles is crucial to harnessing their properties. Although microscopy is ideal for this purpose, it allows for the analysis of only a few nanoparticles. Thus, there is a need for structural methods that take the whole sample into account. Here, a novel bulk-approach based on the combined analysis of synchrotron X-ray powder diffraction with whole powder pattern modeling, Rietveld and pair distribution function is presented. The microstructural temporal evolution of FeO/FeO core/shell nanocubes is studied at different time intervals. The results indicate that a two-phase approach (FeO and FeO) is not sufficient to successfully fit the data and two additional interface phases (FeO and FeO) are needed to obtain satisfactory fits, i.e., an onion-type structure. The analysis shows that the FeO phases grow to some extent (≈1 nm) at the expense of the FeO core. Moreover, the FeO core progressively changes its stoichiometry to accommodate more oxygen. The temporal evolution of the parameters indicates that the structure of the FeO/FeO nanocubes is rather stable, although the exact interface structure slightly evolves with time. This approach paves the way for average studies of interfaces in different kinds of heterostructured nanoparticles, particularly in cases where spectroscopic methods have some limitations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Zinc blende and wurtzite CoO polymorph nanoparticles, rational synthesis and commensurate and incommensurate magnetic order

  • Golosovsky, I. V.
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Del Corro, Elena|||0000-0001-6452-9139
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Puente Orench, Inés|||0000-0001-5491-1238
  • Nogués, Josep|||0000-0003-4616-1371
On the nanoscale, CoO can have different polymorph crystal structures, zinc blende and wurtzite, apart from rock salt, which is the stable one in bulk. However, the magnetic structures of the zinc blende and wurtzite phases remain virtually unexplored. Here we discuss some of the main parameters controlling the growth of the CoO wurtzite and zinc blende polymorphs by thermal decomposition of cobalt (II) acetylacetonate. In addition, we present a detailed neutron diffraction study of oxygen deficient CoO (CoO) nanoparticles with zinc blende (∼15 nm) and wurtzite (∼30 nm) crystal structures to unravel their magnetic order and its temperature evolution. The magnetic order of the zinc blende nanoparticles is antiferromagnetic and appears at the Néel temperature T ∼ 203 K. It corresponds to the 3rd type of magnetic ordering in a face-centered cubic lattice with magnetic moments aligned along a cube edge. The magnetic structure in the wurtzite nanoparticles turned out to be rather complex with two perpendicular components. One component is incommensurate, of the longitudinal spin wave type, with the magnetic moments confined in the ab-plane. In the perpendicular direction, this magnetic order is uncorrelated, forming quasi-two-dimensional magnetic layers. The component of the magnetic moment, aligned along the hexagonal axis, is commensurate and corresponds to the antiferromagnetic order known as the 2nd type in a wurtzite structure. The Néel temperature of wurtzite phase is estimated to be ∼109 K. The temperature dependence of the magnetic reflections confirms the reduced dimensionality of the incommensurate magnetic order. Incommensurate magnetic structures in nanoparticles are an unusual phenomenon and in the case of wurtzite CoO it is probably caused by structural defects (e.g., vacancies, strains and stacking faults).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unravelling the Elusive Antiferromagnetic Order in Wurtzite and Zinc Blende CoO Polymorph Nanoparticles

  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Golosovsky, I. V.
  • Winkler, Elin
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Zysler, Roberto D.
  • Baró, M. D.|||0000-0002-8636-1063
  • Nogués, Josep|||0000-0003-4616-1371
Although cubic rock salt-CoO has been extensively studied, the magnetic properties of the main nanoscale CoO polymorphs (hexagonal wurtzite and cubic zinc blende structures) are rather poorly understood. Here, a detailed magnetic and neutron diffraction study on zinc blende and wurtzite CoO nanoparticles is presented. The zinc blende-CoO phase is antiferromagnetic with a 3rd type structure in a face-centered cubic lattice and a Néel temperature of T (zinc-blende) ≈225 K. Wurtzite-CoO also presents an antiferromagnetic order, T (wurtzite) ≈109 K, although much more complex, with a 2nd type order along the c-axis but an incommensurate order along the y-axis. Importantly, the overall magnetic properties are overwhelmed by the uncompensated spins, which confer the system a ferromagnetic-like behavior even at room temperature.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Atomic-Scale Determination of Cation Inversion in Spinel-Based Oxide Nanoparticles

  • Torruella, Pau
  • Ruiz Caridad, Alicia
  • Walls, Michael
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Blanco Portals, Javier|||0000-0002-7037-269X
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Nogués, Josep|||0000-0003-4616-1371
  • Peiro, Francesca|||0000-0002-5697-0554
  • Estrade, Sonia|||0000-0002-3340-877X
The atomic structure of nanoparticles can be easily determined by transmission electron microscopy. However, obtaining atomic-resolution chemical information about the individual atomic columns is a rather challenging endeavor. Here, crystalline monodispersed spinel FeO/MnO core-shell nanoparticles have been thoroughly characterized in a high-resolution scanning transmission electron microscope. Electron energy-loss spectroscopy (EELS) measurements performed with atomic resolution allow the direct mapping of the Mn/Mn ions in the shell and the Fe/Fe in the core structure. This enables a precise understanding of the core-shell interface and of the cation distribution in the crystalline lattice of the nanoparticles. Considering how the different oxidation states of transition metals are reflected in EELS, two methods of performing a local evaluation of the cation inversion in spinel lattices are introduced. Both methods allow the determination of the inversion parameter in the iron oxide core and manganese oxide shell, as well as detecting spatial variations in this parameter, with atomic resolution. X-ray absorption measurements on the whole sample confirm the presence of cation inversion. These results present a significant advance toward a better correlation of the structural and functional properties of nanostructured spinel oxides.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced Ultrafast Nonlinear Optical Response in Ferrite Core/Shell Nanostructures with Excellent Optical Limiting Performance

  • Perumbilavil, Sreekanth
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Tiwari, Gaurav Kumar
  • Nogués, Josep|||0000-0003-4616-1371
  • Endo, Tamio
  • Philip, Reji
Nonlinear optical nanostructured materials are gaining increased interest as optical limiters for various applications, although many of them suffer from reduced efficiencies at high-light fluences due to photoinduced deterioration. The nonlinear optical properties of ferrite core/shell nanoparticles showing their robustness for ultrafast optical limiting applications are reported. At 100 fs ultrashort laser pulses the effective two-photon absorption (2PA) coefficient shows a nonmonotonic dependence on the shell thickness, with a maximum value obtained for thin shells. In view of the local electric field confinement, this indicates that core/shell is an advantageous morphology to improve the nonlinear optical parameters, exhibiting excellent optical limiting performance with effective 2PA coefficients in the range of 10 cm W (100 fs excitation), and optical limiting threshold fluences in the range of 1.7 J cm. These values are comparable to or better than most of the recently reported optical limiting materials. The quality of the open aperture Z-scan data recorded from repeat measurements at intensities as high as 35 TW cm, indicates their considerably high optical damage thresholds in a toluene dispersion, ensuring their robustness in practical applications. Thus, the high photostability combined with the remarkable nonlinear optical properties makes these nanoparticles excellent candidates for ultrafast optical limiting applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Probing the meta-stability of oxide core/shell nanoparticle systems at atomic resolution

  • Roldan, Manuel A.
  • Mayence, Arnaud
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Ishikawa, Ryo
  • Salafranca, Juan
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Baró, M. D.|||0000-0002-8636-1063
  • Nogués, Josep|||0000-0003-4616-1371
  • Pennycook, Stephen J.
  • Varela del Arco, María|||0000-0002-6582-7004
Hybrid nanoparticles allow exploiting the interplay of confinement, proximity between different materials and interfacial effects. However, to harness their properties an in-depth understanding of their (meta)stability and interfacial characteristics is crucial. This is especially the case of nanosystems based on functional oxides working under reducing conditions, which may severely impact their properties. In this work, the in-situ electron-induced selective reduction of Mn₃O₄ to MnO is studied in magnetic Fe₃O₄/Mn₃O₄ and Mn₃O₄/Fe₃O₄ core/shell nanoparticles by means of high-resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Such in-situ transformation allows mimicking the actual processes in operando environments. A multi-stage image analysis using geometric phase analysis combined with particle image velocity enables direct monitoring of the relationship between structure, chemical composition and strain relaxation during the Mn₃O₄ reduction. In the case of Fe₃O₄/Mn₃O₄ core/shell the transformation occurs smoothly without the formation of defects. However, for the inverse Mn₃O₄/Fe₃O₄O core/shell configuration the electron beam-induced transformation occurs in different stages that include redox reactions and void formation followed by strain field relaxation via formation of defects. This study highlights the relevance of understanding the local dynamics responsible for changes in the particle composition in order to control stability and, ultimately, macroscopic functionality.