Pasar al contenido principal

NANOESTRUCTURAS MAGNETICAS Y MAGNETOPLASMONICAS TERANOSTICAS

MAT2013-48628-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Galvanic replacement onto complex metal-oxide nanoparticles, impact of water or other oxidizers in the formation of either fully dense onion-like or multicomponent hollow MnOx/FeOx structures

  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Torruella Besa, Pau|||0000-0002-6864-4000
  • Petrecca, Michele|||0000-0002-4895-0254
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Puntes, Víctor|||0000-0001-8996-9499
  • Nogués, Josep|||0000-0003-4616-1371
Multicomponent metal-oxide nanoparticles are appealing structures from applied and fundamental viewpoints. The control on the synthetic parameters in colloidal chemistry allows the growth of complex nanostructures with novel morphologies. In particular, the synthesis of biphase metal-oxide hollow nanoparticles has been reported based on galvanic replacement using an organic-based seeded-growth approach, but with the presence of HO. Here we report a novel route to synthesize either fully dense or hollow core/shell metal-oxide nanoparticles (MnO/FeO) by simply adding or not oxidants in the reaction. We demonstrate that the presence of oxidants (e.g., O carried by the not properly degassed HO or (CH)NO) allows the formation of hollow structures by a galvanic reaction between the MnO and FeO phases. In particular, the use of (CH)NO as oxidant allows for the first time a very reliable all-organic synthesis of hollow MnO/FeO nanoparticles without the need of water (with a somewhat unreliable oxidation role). Oxidants permit the formation of MnO/FeO hollow nanoparticles by an intermediate step where the MnO/MnO seeds are oxidized into MnO, thus allowing the Mn → Mn reduction by the Fe ions. The lack of proper oxidative conditions leads to full-dense onion-like core/shell MnO/MnO/FeO particles. Thus, we show that the critical step for galvanic replacement is the proper seed oxidation states so that their chemical reduction by the shell ions is thermodynamically favored.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailored Height Gradients in Vertical Nanowire Arrays via Mechanical and Electronic Modulation of Metal-Assisted Chemical Etching

  • Otte, Marinus A.
  • Solis-Tinoco, V.
  • Prieto Vizán, Patricia
  • Borrisé, Xavier
  • Lechuga, Laura M.
  • González Sagardoy, María Ujué
  • Sepúlveda, Borja
In current top-down nanofabrication methodologies the design freedom is generally constrained to the two lateral dimensions, and is only limited by the resolution of the employed nanolithographic technique. However, nanostructure height, which relies on certain mask-dependent material deposition or etching techniques, is usually uniform, and on-chip variation of this parameter is difficult and generally limited to very simple patterns. Herein, a novel nanofabrication methodology is presented, which enables the generation of high aspect-ratio nanostructure arrays with height gradients in arbitrary directions by a single and fast etching process. Based on metal-assisted chemical etching using a catalytic gold layer perforated with nanoholes, it is demonstrated how nanostructure arrays with directional height gradients can be accurately tailored by: (i) the control of the mass transport through the nanohole array, (ii) the mechanical properties of the perforated metal layer, and (iii) the conductive coupling to the surrounding gold film to accelerate the local electrochemical etching process. The proposed technique, enabling 20-fold on-chip variation of nanostructure height in a spatial range of a few micrometers, offers a new tool for the creation of novel types of nano-assemblies and metamaterials with interesting technological applications in fields such as nanophotonics, nanophononics, microfluidics or biomechanics., Authors acknowledge the financial support of Spanish MINECO projects MAT2011–12645-E, TEC2012–34280, MAT2011–29194-C02–01, CSD2008-00023, and MAT2013–48628-R. V. Solis-Tinoco acknowledges financial support from The National Council for Science and Technology (CONACyT), Mexico. ICN2 acknowledges support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant No. SEV-2013–0295., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Applications of exchange coupled bi-magnetic hard/soft and soft/hard magnetic core/shell nanoparticles

  • López-Ortega, Alberto
  • Estrader, Marta
  • Salazar-Álvarez, G.
  • Roca, Alejandro G.
  • Nogués, Josep
arXiv:1406.3966, The applications of exchange coupled bi-magnetic hard/soft and soft/hard ferromagnetic core/shell nanoparticles are reviewed. After a brief description of the main synthesis approaches and the core/shell structural-morphological characterization, the basic static and dynamic magnetic properties are presented. Five different types of prospective applications, based on diverse patents and research articles, are described: permanent magnets, recording media, microwave absorption, biomedical applications and other applications. Both the advantages of the core/shell morphology and some of the remaining challenges are discussed., This work has been supported by the MAT2010-20616-C02 and MAT2013-48628-R projects of the Spanish Ministerio de Economía y Competitividad (MINECO) and by the 2014-SGR-1015 project of the Generalitat de Catalunya. M. Estrader wants to thank the Spanish MINECO for a Juan de la Cierva post-doctoral fellowship. A.G. Roca would like to thank Generalitat de Catalunya for financial support under the Beatriu de Pinos fellowship program (2011 BP_B 00209). ICN2 acknowledges support from the Severo Ochoa Program of the Spanish MINECO., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced magnetic properties in antiferromagnetic-core/ferrimagnetic-shell nanoparticles

  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Nogués, Josep
This work is licensed under a Creative Commons Attribution 4.0 International License., Bi-magnetic core/shell nanoparticles are gaining increasing interest due to their foreseen applications. Inverse antiferromagnetic(AFM)/ferrimagnetic(FiM) core/shell nanoparticles are particularly appealing since they may overcome some of the limitations of conventional FiM/AFM systems. However, virtually no simulations exist on this type of morphology. Here we present systematic Metropolis Monte Carlo simulations of the exchange bias properties of such nanoparticles. The coercivity, HC, and loop shift, Hex, present a non-monotonic dependence with the core diameter and the shell thickness, in excellent agreement with the available experimental data. Additionally, we demonstrate novel unconventional behavior in FiM/AFM particles. Namely, while HC and Hex decrease upon increasing FiM thickness for small AFM cores (as expected), they show the opposite trend for large cores. This presents a counterintuitive FiM size dependence for large AFM cores that is attributed to the competition between core and shell contributions, which expands over a wider range of core diameters leading to non-vanishing Hex even for very large cores. Moreover, the results also hint different possible ways to enhance the experimental performance of inverse core/shell nanoparticles for diverse applications., M.V. and K.N.T. acknowledge the financial support of the European Social Fund (EU) and the Greek National Operational Program ‘‘Education and Lifelong Learning’’ in the framework of ARISTEIA I (Project COMANA/22). J.N. acknowledges the support of the 2014-SGR-1015 project of the Generalitat de Catalunya and the MAT2010-20616-C02 and MAT2013-48628-R projects of the Spanish Ministerio de Economía y Competitividad (MINECO). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Origin of the large dispersion of magnetic properties in nanostructured oxides: FexO/Fe3O4 nanoparticles as a case study

  • Estrader, Marta
  • López-Ortega, Alberto
  • Golosovsky, Igor V.
  • Estradé, Sònia
  • Roca, Alejandro G.
  • Salazar-Álvarez, G.
  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Peiró, Francesca
  • Baró, María Dolors
  • Nogués, Josep
This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.-- et al., The intimate relationship between stoichiometry and physicochemical properties in transition-metal oxides makes them appealing as tunable materials. These features become exacerbated when dealing with nanostructures. However, due to the complexity of nanoscale materials, establishing a distinct relationship between structure-morphology and functionalities is often complicated. In this regard, in the FexO/Fe3O4 system a largely unexplained broad dispersion of magnetic properties has been observed. Here we show, thanks to a comprehensive multi-technique approach, a clear correlation between the magneto-structural properties in large (45 nm) and small (9 nm) FexO/Fe3O4 core/shell nanoparticles that can explain the spread of magnetic behaviors. The results reveal that while the FexO core in the large nanoparticles is antiferromagnetic and has bulk-like stoichiometry and unit-cell parameters, the FexO core in the small particles is highly non-stoichiometric and strained, displaying no significant antiferromagnetism. These results highlight the importance of ample characterization to fully understand the properties of nanostructured metal oxides., This work was supported by the 2014-SGR-1015 and 2009-SGR-35 projects of the Generalitat de Catalunya, by the MAT2010-20616-C02, MAT2011-27380-C02-01, MAT2010-16407, MAT2013-48628-R and CSD2009-00013 projects of the Spanish Ministerio de Economía y Competitividad (MINECO), the ONDA and COEFNANO projects (no. FP7-PEOPLE-2009-IRSES-247518 and no. FP7-PEOPLE-2012-IRSES-318901) of the European Union, the Russian grants RFBR 13-02-00121, 13-02-12429 and RG 14.B25.31.0025, the Brazilian grants CNPq-304368/2010-5 and FAPEMIG-PPM 00319-11, the Argentine grants PIP 1333 (CONICET) and SECTyP 06/C404 (Univ. Nac. de Cuyo) and the Swedish Research Council (VR). Research at NCSR “D” was supported by the HSF-EU program ARISTEIA, grant COMANA/22. GSA was partially supported by the Knut and Alice Wallenberg Foundation (Project: 3DEM-NATUR). I.V.G. thanks the Generalitat de Catalunya for his sabbatical fellowship (2010 PIV 00096). M.D.B. was partially supported by an ICREA Academia award. M.E. acknowledges the Spanish Ministry of Science and Innovation through the Juan de la Cierva Program. A. G. Roca would like to thank Generalitat de Catalunya for financial support under the Beatriu de Pinós fellowship program (2011 BP_B 00209). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D visualization of the iron oxidation state in FeO/Fe3O4 core-shell nanocubes from electron energy loss tomography

  • Torruella, Pau
  • Arenal, Raúl
  • Peña, Francisco de la
  • Saghi, Zineb
  • Yedra, Lluís
  • Eljarrat, Alberto
  • López-Conesa, Lluís
  • Estrader, Marta
  • López-Ortega, Alberto
  • Salazar-Álvarez, G.
  • Nogués, Josep
  • Ducati, Caterina
  • Midgley, Paul A.
  • Peiró, Francesca
  • Estradé, Sònia
The physicochemical properties used in numerous advanced nanostructured devices are directly controlled by the oxidation states of their constituents. In this work we combine electron energy-loss spectroscopy, blind source separation, and computed tomography to reconstruct in three dimensions the distribution of Fe and Fe ions in a FeO/FeO core/shell cube-shaped nanoparticle with nanometric resolution. The results highlight the sharpness of the interface between both oxides and provide an average shell thickness, core volume, and average cube edge length measurements in agreement with the magnetic characterization of the sample., This work has been carried out in the frame of the Spanish research projects MAT2013-41506, MAT2013-48628-R, FIS2013-46159-C3-3-P, and CSD2009-00013, and Catalan Government support from the SGR2014-672 and 2014-SGR1015 projects is acknowledged. We also acknowledge the support received from the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative-I3). G.S.A. was partially supported by the Knut and Alice Wallenberg Foundation (Project: 3DEMNATUR). M.E. acknowledges the Spanish Ministry of Science and Innovation through the Juan de la Cierva Program. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). F.d.l.P. and C.D. acknowledge funding from the ERC under grant no. 259619 PHOTO EM. C.D. acknowledges the Royal Society for funding, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Galvanic replacement onto complex metal-oxide nanoparticles: impact of water or other oxidizers in the formation of either fully dense onion-like or multicomponent hollow MnOx/FeOx structures

  • López-Ortega, Alberto
  • Roca, Alejandro G.
  • Torruella, Pau
  • Petrecca, Michele
  • Estradé, Sònia
  • Peiró, Francesca
  • Puntes, Víctor F.
  • Nogués, Josep
Multicomponent metal-oxide nanoparticles are appealing structures from applied and fundamental viewpoints. The control on the synthetic parameters in colloidal chemistry allows the growth of complex nanostructures with novel morphologies. In particular, the synthesis of biphase metal-oxide hollow nanoparticles has been reported based on galvanic replacement using an organic-based seeded-growth approach, but with the presence of HO. Here we report a novel route to synthesize either fully dense or hollow core/shell metal-oxide nanoparticles (MnO/FeO) by simply adding or not oxidants in the reaction. We demonstrate that the presence of oxidants (e.g., O carried by the not properly degassed HO or (CH)NO) allows the formation of hollow structures by a galvanic reaction between the MnO and FeO phases. In particular, the use of (CH)NO as oxidant allows for the first time a very reliable all-organic synthesis of hollow MnO/FeO nanoparticles without the need of water (with a somewhat unreliable oxidation role). Oxidants permit the formation of MnO/FeO hollow nanoparticles by an intermediate step where the MnO/MnO seeds are oxidized into MnO, thus allowing the Mn → Mn reduction by the Fe ions. The lack of proper oxidative conditions leads to full-dense onion-like core/shell MnO/MnO/FeO particles. Thus, we show that the critical step for galvanic replacement is the proper seed oxidation states so that their chemical reduction by the shell ions is thermodynamically favored., Financial support from the 2014-SGR-1015, MAT2010-20616-C02, MAT2013-48628-R, MAT2013-41506, and CSD2009-00013 projects is acknowledged. ALO acknowledges the Juan de la Cierva Program (MINECO IJCI-2014-21530). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metamirrors based on arrays of silicon nanowires with height gradients

  • Otte, Marinus A.
  • García-Martín, Antonio
  • Borrisé, Xavier
  • Sepúlveda, Borja
Arrays of silicon nanowires with height gradients fabricated using metal-assisted chemical etching act as tunable metamirrors enabling light focusing the reflected light in arbitrary shapes. Metamirrors with non-cylindrical nanowires can simultaneously focus the reflected light and induce strong polarization conversion effect., The authors acknowledge the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO) projects MAT2013-48628-R, FIS2013-49280-EXP, and MAT2011-12645-E and Comunidad the Madrid project S2013/MIT-2740. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetically amplified photothermal therapies and multimodal imaging with magneto-plasmonic nanodomes

  • Li, Zhi
  • Aranda-Ramos, Antonio
  • Güell-Grau, Pau
  • Tajada Herráiz, José Luis
  • Pou-Macayo, Laia
  • Lope-Piedrafita, Silvia
  • Pi, Francesc
  • Roca, Alejandro G.
  • Baró, María Dolors
  • Sort, Jordi
  • Nogués, Carme
  • Sepúlveda, Borja
Nanotherapies require new ways for controlling and improving the delivery of the therapeutic agents to the site of action to maximize their efficacy and minimize the side effects. This control is particularly relevant in photothermal treatments to reduce the required light intensity and amount of injected nanoparticles, and to minimize necrotic cell deaths. Here we present a novel concept for multifunctional nanobiomedical agents: magneto-plasmonic (MP) nanodomes for magnetically guided and amplified photothermal therapies and as contrast agents for multimodal imaging. The MP nanodomes are composed of a Fe/Au bilayer semi-shell deposited on a 100 nm diameter fluorescent polystyrene nanosphere, which gather a unique combination of straightforward functionalization, high colloidal stability, very strong ferromagnetic behavior and intense optical absorption efficiency in the near infrared. We show that the photothermal conversion efficiency of the Fe/Au nanodomes with high Fe ratios is substantially larger than pure plasmonic Au nanodomes and the state-of-art plasmonic nanoheaters, i.e. Au nanorods and nanoshells, by merging strong optical absorption, minimized scattering and low optical anisotropy. Remarkably, the effective magnetophoretic concentration of the Fe/Au nanodomes at the illumination region enables large local increase of the optically induced temperature rise. The Fe semishell also provides very intense T2 contrast in nuclear magnetic resonance, which is at least 15-fold larger per particle than commercial iron oxide contrast agents. Moreover, the fluorescent polystyrene nanosphere and the Au semishell integrate valuable fluorescent and X-ray contrasts, respectively, which we have used to assess the nanodomes internalization by cancer cells. The MP nanodomes are nontoxic to cells even in the case of magnetophoretic local enrichment with initially high particle concentration (100 μg/mL). Remarkably, we demonstrate amplified local photothermal treatments by the magnetic enrichment of the nanodomes at the illumination region, which enables reaching nearly 100% reduction of cell viability with low particle concentration (10 μg/mL) and mild NIR laser intensity (5 W/cm2). These results highlight the high potential of MP nanodomes for magnetically guided and amplified photothermal therapies., This work is supported by Spanish Ministry of Economy, Industry and Competitiveness (MINECO) and European Regional Development Fund (FEDER) (Projects number: MAT2013-48628-R, MAT2016-77391-R, MAT2017-86357-C3-1-R and MAT2017-86357-C3-3-R). Generalitat de Catalunya (2017-SGR-292) is acknowledged. ICN2 is funded by the Centres de Recerca de Catalunya (CERCA) Programme/Generalitat de Catalunya. ICN2 also acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). Zhi Li acknowledges the Chinese Scholarship Council Program (201506950059) for financial support. Jordi Sort acknowledges the financial support by the European Research Council (SPIN-PORICS 2014-Consolidator Grant, Agreement N° 648454)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simultaneous local heating/thermometry based on plasmonic magnetochromic nanoheaters

  • Li, Zhi
  • López-Ortega, Alberto
  • Aranda-Ramos, Antonio
  • Tajada Herráiz, José Luis
  • Sort, Jordi
  • Nogués, Carme
  • Vavassori, Paolo
  • Nogués, Josep
  • Sepúlveda, Borja
A crucial challenge in nanotherapies is achieving accurate and real‐time control of the therapeutic action, which is particularly relevant in local thermal therapies to minimize healthy tissue damage and necrotic cell deaths. Here, a nanoheater/thermometry concept is presented based on magnetoplasmonic (Co/Au or Fe/Au) nanodomes that merge exceptionally efficient plasmonic heating and simultaneous highly sensitive detection of the temperature variations. The temperature detection is based on precise optical monitoring of the magnetic‐induced rotation of the nanodomes in solution. It is shown that the phase lag between the optical signal and the driving magnetic field can be used to detect viscosity variations around the nanodomes with unprecedented accuracy (detection limit 0.0016 mPa s, i.e., 60‐fold smaller than state‐of‐the‐art plasmonic nanorheometers). This feature is exploited to monitor the viscosity reduction induced by optical heating in real‐time, even in highly inhomogeneous cell dispersions. The magnetochromic nanoheater/thermometers show higher optical stability, much higher heating efficiency and similar temperature detection limits (0.05 °C) compared to state‐of‐the art luminescent nanothermometers. The technological interest is also boosted by the simpler and lower cost temperature detection system, and the cost effectiveness and scalability of the nanofabrication process, thereby highlighting the biomedical potential of this nanotechnology., This work was supported by the Spanish Ministry of Economy, Industry and Competitivenes (MINECO) projects MAT2013‐48628‐R, MAT2016‐77391‐R, and PCIN‐2016‐093 (H2020 M‐ERA.NET). Z.L. acknowledges the Chinese Scholarship Council (CSC) Program (201506950059) for financial support. The 2017‐SGR‐292 project of the Generalitat de Catalunya is acknowledged. The ICN2 was funded by the Centres de Recerca de Catalunya (CERCA) programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa programme (MINECO, No. SEV‐2013‐0295). A.L.‐O. and P.V. acknowledge funding from the Basque Government (No. PI2015_1_19), MINECO and the European Regional Development Fund (FEDER) (No. FIS2015 64519 R). A.L.‐O. acknowledges the support from Juan de la Cierva grant. This work was also supported by MINECO under the Maria de Maeztu Units of Excellence (MDM‐2016‐0618). J.S. acknowledges the financial support by the European Research Council (SPIN‐PORICS 2014‐Consolidator Grant, Agreement No. 648454)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Origin of the large dispersion of magnetic properties in nanostructured oxides: FexO/Fe3O4 nanoparticles as a case study

  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Golosovsky, I. V.
  • Estrade, Sonia|||0000-0002-3340-877X
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • López-Conesa, Lluís
  • Tobia, Dina
  • Winkler, Elin
  • Ardisson, José D.
  • Macedo, Waldemar A. A.
  • Morphis, Andreas
  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Gukasov, Arsen|||0000-0003-2763-468X
  • Mirebeau, Isabelle
  • Makarova, O. L.
  • Zysler, Roberto D.
  • Peiro, Francesca|||0000-0002-5697-0554
  • Baró, M. D.|||0000-0002-8636-1063
  • Bergström, Lennart
  • Nogués, Josep|||0000-0003-4616-1371
The intimate relationship in transition-metal oxides between stoichiometry and physiochemical properties makes them appealing as tunable materials. These features become exacerbated when dealing with nanostructures. However, due to the complexity of nanoscale materials, establishing a distinct relationship between structure-morphology and functionalities is often complicated. In this regard, in the FexO/Fe3O4 system a largely unexplained broad dispersion of magnetic properties has been observed. Here we show, thanks to a comprehensive multi-technique approach, a clear correlation between magneto-structural properties in large (45 nm) and small (9 nm) FexO/Fe3O4 core/shell nanoparticles that can explain the spread of magnetic behaviors. The results reveal that while the FexO core in the large nanoparticles is antiferromagnetic and has bulk-like stoichiometry and unit-cell parameters, the FexO core in the small particles is highly non-stoichiometric and strained, displaying no significant antiferromagnetism. These results highlight the importance of ample characterization to fully understand the properties of nanostructured metal oxides.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced magnetic properties in antiferromagnetic-core/ferrimagnetic-shell nanoparticles

  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Nogués, Josep|||0000-0003-4616-1371
Bi-magnetic core/shell nanoparticles are gaining increasing interest due to their foreseen applications. Inverse antiferromagnetic(AFM)/ferrimagnetic(FiM) core/shell nanoparticles are particularly appealing since they may overcome some of the limitations of conventional FiM/AFM systems. However, virtually no simulations exist on this type of morphology. Here we present systematic Metropolis Monte Carlo simulations of the exchange bias properties of such nanoparticles. The coercivity, H C, and loop shift, H ex, present a non-monotonic dependence with the core diameter and the shell thickness, in excellent agreement with the available experimental data. Additionally, we demonstrate novel unconventional behavior in FiM/AFM particles. Namely, while H C and H ex decrease upon increasing FiM thickness for small AFM cores (as expected), they show the opposite trend for large cores. This presents a counterintuitive FiM size dependence for large AFM cores that is attributed to the competition between core and shell contributions, which expands over a wider range of core diameters leading to non-vanishing H ex even for very large cores. Moreover, the results also hint different possible ways to enhance the experimental performance of inverse core/shell nanoparticles for diverse applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

3D Visualization of the Iron Oxidation State in FeO/Fe3O4 Core-Shell Nanocubes from Electron Energy Loss Tomography

  • Torruella, Pau
  • Arenal, Raúl|||0000-0002-2071-9093
  • Peña, Francisco de la
  • Saghi, Zineb|||0000-0002-8895-8410
  • Yedra Cardona, Lluís|||0000-0003-1818-9836
  • Eljarrat Ascunce, Alberto
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Nogués, Josep|||0000-0003-4616-1371
  • Ducati, Caterina
  • Midgley, Paul A.
  • Peiro, Francesca|||0000-0002-5697-0554
  • Estrade, Sonia|||0000-0002-3340-877X
The physicochemical properties used in numerous advanced nanostructured devices are directly controlled by the oxidation states of their constituents. In this work we combine electron energy-loss spectroscopy, blind source separation, and computed tomography to reconstruct in three dimensions the distribution of Fe and Fe ions in a FeO/FeO core/shell cube-shaped nanoparticle with nanometric resolution. The results highlight the sharpness of the interface between both oxides and provide an average shell thickness, core volume, and average cube edge length measurements in agreement with the magnetic characterization of the sample.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metamirrors Based on Arrays of Silicon Nanowires with Height Gradients

  • Otte Ortiz, Marinus Albertus
  • García Martín, Antonio
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Sepúlveda, Borja|||0000-0002-1562-7602
Arrays of silicon nanowires with height gradients fabricated using metal-assisted chemical etching act as tunable metamirrors enabling light focusing the reflected light in arbitrary shapes. Metamirrors with non-cylindrical nanowires can simultaneously focus the reflected light and induce strong polarization conversion effect.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tailored height gradients in vertical nanowire arrays via mechanical and electronic modulation of metal-assisted chemical etching

  • Otte Ortiz, Marinus Albertus
  • Solís Tinoco, Verónica Iraís|||0000-0001-8797-7559
  • Prieto Recio, Pilar|||0000-0001-8978-5139
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Lechuga, Laura M|||0000-0001-5187-5358
  • González, María Ujué|||0000-0001-7012-0049
  • Sepúlveda, Borja|||0000-0002-1562-7602
In current top-down nanofabrication methodologies the design freedom is generally constrained to the two lateral dimensions, and is only limited by the resolution of the employed nanolithographic technique. However, nanostructure height, which relies on certain mask-dependent material deposition or etching techniques, is usually uniform, and on-chip variation of this parameter is difficult and generally limited to very simple patterns. Herein, a novel nanofabrication methodology is presented, which enables the generation of high aspect-ratio nanostructure arrays with height gradients in arbitrary directions by a single and fast etching process. Based on metal-assisted chemical etching using a catalytic gold layer perforated with nanoholes, it is demonstrated how nanostructure arrays with directional height gradients can be accurately tailored by: (i) the control of the mass transport through the nanohole array, (ii) the mechanical properties of the perforated metal layer, and (iii) the conductive coupling to the surrounding gold film to accelerate the local electrochemical etching process. The proposed technique, enabling 20-fold on-chip variation of nanostructure height in a spatial range of a few micrometers, offers a new tool for the creation of novel types of nano-assemblies and metamaterials with interesting technological applications in fields such as nanophotonics, nanophononics, microfluidics or biomechanics. Based on metal-assisted chemical etching using a catalytic gold layer perforated with nanoholes, it is demonstrated how high aspect-ratio nanostructure arrays with directional height gradients can be accurately tailored by: i) control of mass transport through the nanohole array, ii) mechanical properties of the perforated metal layer, and iii) conductive coupling to the surrounding gold film to accelerate the local electrochemical etching process. The proposed technique, enabling 20- -fold on- -chip variation of nanostructure height in a spatial range of a few microns, offers a new tool for the creation of novel types of nano- -assemblies and metamaterials with interesting technological applications in fields such as nanophotonics, nanophononics, microfluidics or biomechanics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Simultaneous Local Heating/Thermometry Based on Plasmonic Magnetochromic Nanoheaters, Simultaneous local nano-heating/thermometry based on plasmonic magnetochromic nanodomes

  • Li, Zhi
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Aranda-Ramos, Antonio|||0000-0003-3476-7026
  • Tajada Herraiz, José Luis
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
  • Vavassori, Paolo
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
A crucial challenge in nanotherapies is achieving accurate and real-time control of the therapeutic action, which is particularly relevant in local thermal therapies to minimize healthy tissue damage and necrotic cell deaths. Here, a nanoheater/thermometry concept is presented based on magnetoplasmonic (Co/Au or Fe/Au) nanodomes that merge exceptionally efficient plasmonic heating and simultaneous highly sensitive detection of the temperature variations. The temperature detection is based on precise optical monitoring of the magnetic-induced rotation of the nanodomes in solution. It is shown that the phase lag between the optical signal and the driving magnetic field can be used to detect viscosity variations around the nanodomes with unprecedented accuracy (detection limit 0.0016 mPa s, i.e., 60-fold smaller than state-of-the-art plasmonic nanorheometers). This feature is exploited to monitor the viscosity reduction induced by optical heating in real-time, even in highly inhomogeneous cell dispersions. The magnetochromic nanoheater/thermometers show higher optical stability, much higher heating efficiency and similar temperature detection limits (0.05 °C) compared to state-of-the art luminescent nanothermometers. The technological interest is also boosted by the simpler and lower cost temperature detection system, and the cost effectiveness and scalability of the nanofabrication process, thereby highlighting the biomedical potential of this nanotechnology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetically amplified photothermal therapies and multimodal imaging with magneto-plasmonic nanodomes

  • Li, Zhi
  • Aranda-Ramos, Antonio|||0000-0003-3476-7026
  • Güell Grau, Pau|||0000-0002-2363-4079
  • Tajada Herraiz, José Luis
  • Pou Macayo, Laia
  • Lope-Piedrafita, Silvia|||0000-0002-8127-6425
  • Pi, F.|||0000-0001-7347-4897
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
Nanotherapies require new ways for controlling and improving the delivery of the therapeutic agents to the site of action to maximize their efficacy and minimize the side effects. This control is particularly relevant in photothermal treatments to reduce the required light intensity and amount of injected nanoparticles, and to minimize necrotic cell deaths. Here we present a novel concept for multifunctional nanobiomedical agents: magneto-plasmonic (MP) nanodomes for magnetically guided and amplified photothermal therapies and as contrast agents for multimodal imaging. The MP nanodomes are composed of a Fe/Au bilayer semi-shell deposited on a 100 nm diameter fluorescent polystyrene nanosphere, which gather a unique combination of straightforward functionalization, high colloidal stability, very strong ferromagnetic behavior and intense optical absorption efficiency in the near infrared. We show that the photothermal conversion efficiency of the Fe/Au nanodomes with high Fe ratios is substantially larger than pure plasmonic Au nanodomes and the state-of-art plasmonic nanoheaters, i.e. Au nanorods and nanoshells, by merging strong optical absorption, minimized scattering and low optical anisotropy. Remarkably, the effective magnetophoretic concentration of the Fe/Au nanodomes at the illumination region enables large local increase of the optically induced temperature rise. The Fe semishell also provides very intense T contrast in nuclear magnetic resonance, which is at least 15-fold larger per particle than commercial iron oxide contrast agents. Moreover, the fluorescent polystyrene nanosphere and the Au semishell integrate valuable fluorescent and X-ray contrasts, respectively, which we have used to assess the nanodomes internalization by cancer cells. The MP nanodomes are nontoxic to cells even in the case of magnetophoretic local enrichment with initially high particle concentration (100 μg/mL). Remarkably, we demonstrate amplified local photothermal treatments by the magnetic enrichment of the nanodomes at the illumination region, which enables reaching nearly 100% reduction of cell viability with low particle concentration (10 μg/mL) and mild NIR laser intensity (5 W/cm). These results highlight the high potential of MP nanodomes for magnetically guided and amplified photothermal therapies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Seeded Growth Synthesis of Au-Fe3O4 Heterostructured Nanocrystals, Rational Design and Mechanistic Insights

  • Fantechi, Elvira|||0000-0002-9323-2198
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Torruella, Pau
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Coy, Emerson|||0000-0002-4149-9720
  • Jurga, Stefan
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Nogués, Josep|||0000-0003-4616-1371
  • Puntes, Víctor|||0000-0001-8996-9499
Multifunctional hybrid nanoparticles comprising two or more entities with different functional properties are gaining ample significance in industry and research. Due to its combination of properties, a particularly appealing example is Au-FeO composite nanoparticles. Here we present an in-depth study of the synthesis of Au-FeO heterostructured nanocrystals (HNCs) by thermal decomposition of iron precursors in the presence of preformed 10 nm Au seeds. The role of diverse reaction parameters on the HNCs formation was investigated using two different precursors: iron pentacarbonyl (Fe(CO)) and iron acetylacetonate (Fe(acac)). The reaction conditions promoting the heterogeneous nucleation of FeO onto Au seeds were found to significantly differ depending on the precursor chosen, where Fe(acac) is considerably more sensitive to the variation of the parameters than Fe(CO) and more subject to homogeneous nucleation processes with the consequent formation of isolated iron oxide nanocrystals (NCs). The role of the surfactants was also crucial in the formation of well-defined and monodisperse HNCs by regulating the access to the Au surface. Similarly, the variations of the [Fe]/[Au] ratio, temperature, and employed solvent were found to act on the mean size and the morphology of the obtained products. Importantly, while the optical properties are rather sensitive to the final morphology, the magnetic ones are rather similar for the different types of obtained HNCs. The surface functionalization of dimer-like HNCs with silica allows their dispersion in aqueous media, opening the path to their use in biomedical applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Applications of exchange coupled bi-magnetic hard/soft and soft/hard magnetic core/shell nanoparticles

  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Nogués, Josep|||0000-0003-4616-1371
The applications of exchange coupled bi-magnetic hard/soft and soft/hard ferromagnetic core/shell nanoparticles are reviewed. After a brief description of the main synthesis approaches and the core/shell structural-morphological characterization, the basic static and dynamic magnetic properties are presented. Five different types of prospective applications, based on diverse patents and research articles, are described: permanent magnets, recording media, microwave absorption, biomedical applications and other applications. Both the advantages of the core/shell morphology and some of the remaining challenges are discussed.