Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metamirrors Based on Arrays of Silicon Nanowires with Height Gradients

  • Otte Ortiz, Marinus Albertus
  • García Martín, Antonio
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Sepúlveda, Borja|||0000-0002-1562-7602
Arrays of silicon nanowires with height gradients fabricated using metal-assisted chemical etching act as tunable metamirrors enabling light focusing the reflected light in arbitrary shapes. Metamirrors with non-cylindrical nanowires can simultaneously focus the reflected light and induce strong polarization conversion effect.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fabrication of well-ordered silicon nanopillars embedded in a microchannel, Via metal-assisted chemical etching: A route towards an opto-mechanical biosensor

  • Solís Tinoco, Verónica Iraís|||0000-0001-8797-7559
  • Márquez, Salomón|||0000-0001-8434-6778
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Lechuga, Laura M.|||0000-0001-5187-5358
Ordered nanopillars have been used as a smart configuration to design and fabricate localized surface plasmon resonance (LSPR) sensors. Importantly, these nanostructures can be integrated within microfluidic channels as a novel opportunity to enhance the response of biosensors and also to control the fluid flow by modifying the wettability surface of the walls. In this work, we demonstrate a large-scale and low-cost nanofabrication methodology that integrates the fabrication of silicon nanopillars (SiNPs) inside a microfluidic channel. The strategy is based on placing a catalytic gold layer patterned with nanoholes inside a SU-8 microchannel, by combining nanosphere lithography, reactive ion etching, and e-beam gold deposition, to control the area, separation distance and diameter of the nanostructures. The height of the SiNPs strongly depends on a well-controlled metal-assisted silicon etching protocol. We demonstrate experimentally that the design and the cleaning of the catalytic gold mesh using ultraviolet ozone strongly affect the etching rate for the formation of large-surface-area nanopillars. Our results explain the fast fabrication of hexagonal arrays of SiNPs embedded in a microfluidic channel with varying aspect ratio from 2 to 7 and separation of 300 nm and 400 nm, respectively, which has important implications for the achievement of new optomechanical biosensors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tailored height gradients in vertical nanowire arrays via mechanical and electronic modulation of metal-assisted chemical etching

  • Otte Ortiz, Marinus Albertus
  • Solís Tinoco, Verónica Iraís|||0000-0001-8797-7559
  • Prieto Recio, Pilar|||0000-0001-8978-5139
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Lechuga, Laura M|||0000-0001-5187-5358
  • González, María Ujué|||0000-0001-7012-0049
  • Sepúlveda, Borja|||0000-0002-1562-7602
In current top-down nanofabrication methodologies the design freedom is generally constrained to the two lateral dimensions, and is only limited by the resolution of the employed nanolithographic technique. However, nanostructure height, which relies on certain mask-dependent material deposition or etching techniques, is usually uniform, and on-chip variation of this parameter is difficult and generally limited to very simple patterns. Herein, a novel nanofabrication methodology is presented, which enables the generation of high aspect-ratio nanostructure arrays with height gradients in arbitrary directions by a single and fast etching process. Based on metal-assisted chemical etching using a catalytic gold layer perforated with nanoholes, it is demonstrated how nanostructure arrays with directional height gradients can be accurately tailored by: (i) the control of the mass transport through the nanohole array, (ii) the mechanical properties of the perforated metal layer, and (iii) the conductive coupling to the surrounding gold film to accelerate the local electrochemical etching process. The proposed technique, enabling 20-fold on-chip variation of nanostructure height in a spatial range of a few micrometers, offers a new tool for the creation of novel types of nano-assemblies and metamaterials with interesting technological applications in fields such as nanophotonics, nanophononics, microfluidics or biomechanics. Based on metal-assisted chemical etching using a catalytic gold layer perforated with nanoholes, it is demonstrated how high aspect-ratio nanostructure arrays with directional height gradients can be accurately tailored by: i) control of mass transport through the nanohole array, ii) mechanical properties of the perforated metal layer, and iii) conductive coupling to the surrounding gold film to accelerate the local electrochemical etching process. The proposed technique, enabling 20- -fold on- -chip variation of nanostructure height in a spatial range of a few microns, offers a new tool for the creation of novel types of nano- -assemblies and metamaterials with interesting technological applications in fields such as nanophotonics, nanophononics, microfluidics or biomechanics.