Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 75
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Galvanic replacement onto complex metal-oxide nanoparticles, impact of water or other oxidizers in the formation of either fully dense onion-like or multicomponent hollow MnOx/FeOx structures

  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Torruella Besa, Pau|||0000-0002-6864-4000
  • Petrecca, Michele|||0000-0002-4895-0254
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Puntes, Víctor|||0000-0001-8996-9499
  • Nogués, Josep|||0000-0003-4616-1371
Multicomponent metal-oxide nanoparticles are appealing structures from applied and fundamental viewpoints. The control on the synthetic parameters in colloidal chemistry allows the growth of complex nanostructures with novel morphologies. In particular, the synthesis of biphase metal-oxide hollow nanoparticles has been reported based on galvanic replacement using an organic-based seeded-growth approach, but with the presence of HO. Here we report a novel route to synthesize either fully dense or hollow core/shell metal-oxide nanoparticles (MnO/FeO) by simply adding or not oxidants in the reaction. We demonstrate that the presence of oxidants (e.g., O carried by the not properly degassed HO or (CH)NO) allows the formation of hollow structures by a galvanic reaction between the MnO and FeO phases. In particular, the use of (CH)NO as oxidant allows for the first time a very reliable all-organic synthesis of hollow MnO/FeO nanoparticles without the need of water (with a somewhat unreliable oxidation role). Oxidants permit the formation of MnO/FeO hollow nanoparticles by an intermediate step where the MnO/MnO seeds are oxidized into MnO, thus allowing the Mn → Mn reduction by the Fe ions. The lack of proper oxidative conditions leads to full-dense onion-like core/shell MnO/MnO/FeO particles. Thus, we show that the critical step for galvanic replacement is the proper seed oxidation states so that their chemical reduction by the shell ions is thermodynamically favored.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Drastic influence of minor Fe or Co additions on the glass forming ability, martensitic transformations and mechanical properties of shape memory Zr-Cu-Al bulk metallic glass composites

  • González, Sergio
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Pérez Zubiaur, Pablo|||0000-0002-4218-2573
  • Rossinyol Casals, Emma|||0000-0002-1656-1254
  • Baró, M. D.|||0000-0002-8636-1063
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The microstructure and mechanical properties of Zr48Cu48 - x Al4M x (M ≡ Fe or Co, x = 0, 0.5, 1 at.%) metallic glass (MG) composites are highly dependent on the amount of Fe or Co added as microalloying elements in the parent Zr48Cu48Al4 material. Addition of Fe and Co promotes the transformation from austenite to martensite during the course of nanoindentation or compression experiments, resulting in an enhancement of plasticity. However, the presence of Fe or Co also reduces the glass forming ability, ultimately causing a worsening of the mechanical properties. Owing to the interplay between these two effects, the compressive plasticity for alloys with x = 0.5 (5.5% in Zr48Cu47.5Al4Co0.5 and 6.2% in Zr48Cu47.5Al4Fe0.5) is considerably larger than for Zr48Cu48Al4 or the alloys with x = 1. Slight variations in the Young's modulus (around 5-10%) and significant changes in the yield stress (up to 25%) are also observed depending on the composition. The different microstructural factors that have an influence on the mechanical behavior of these composites are investigated in detail: (i) co-existence of amorphous and crystalline phases in the as-cast state, (ii) nature of the crystalline phases (austenite versus martensite content), and (iii) propensity for the austenite to undergo a mechanically-driven martensitic transformation during plastic deformation. Evidence for intragranular nanotwins likely generated in the course of the austenite-martensite transformation is provided by transmission electron microscopy. Our results reveal that fine-tuning of the composition of the Zr-Cu-Al-(Fe,Co) system is crucial in order to optimize the mechanical performance of these bulk MG composites, to make them suitable materials for structural applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanomechanical behavior of 3D porous metal-ceramic nanocomposite Bi/Bi2 O3 films

  • Domingo Roca, Roger|||0000-0002-0557-5431
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Pellicer, Eva|||0000-0002-8901-0998
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Sort, Jordi|||0000-0003-1213-3639
The nanomechanical properties of three-dimensional (3D) porous metal/metal oxide composite (Bi/Bi2O3) films grown by direct current electrodeposition have been studied by nanoindentation at two different loading rates. The synthesized films exhibit a mixture of crystallographic phases of metallic Bi and α-Bi2O3, as evidenced by X-ray diffraction. An in-situ compaction of the sample during the nanoindentation assays has been observed. This in-situ compaction has an influence over both the hardness and elastic modulus of the material, being more important on the latter and, therefore, on the determination of the degree of porosity of the composite film. The influence of the loading rate on the mechanical properties has been investigated. In addition, time-dependent deformation processes (creep tests) have been also performed, revealing an anelastic behavior irrespective of the loading rate. From these creep tests, a viscoelastic non-Newtonian behavior of the sample is evidenced, which is well-described by a three-element Voigt model.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Origin of the large dispersion of magnetic properties in nanostructured oxides: FexO/Fe3O4 nanoparticles as a case study

  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Golosovsky, I. V.
  • Estrade, Sonia|||0000-0002-3340-877X
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • López-Conesa, Lluís
  • Tobia, Dina
  • Winkler, Elin
  • Ardisson, José D.
  • Macedo, Waldemar A. A.
  • Morphis, Andreas
  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Gukasov, Arsen|||0000-0003-2763-468X
  • Mirebeau, Isabelle
  • Makarova, O. L.
  • Zysler, Roberto D.
  • Peiro, Francesca|||0000-0002-5697-0554
  • Baró, M. D.|||0000-0002-8636-1063
  • Bergström, Lennart
  • Nogués, Josep|||0000-0003-4616-1371
The intimate relationship in transition-metal oxides between stoichiometry and physiochemical properties makes them appealing as tunable materials. These features become exacerbated when dealing with nanostructures. However, due to the complexity of nanoscale materials, establishing a distinct relationship between structure-morphology and functionalities is often complicated. In this regard, in the FexO/Fe3O4 system a largely unexplained broad dispersion of magnetic properties has been observed. Here we show, thanks to a comprehensive multi-technique approach, a clear correlation between magneto-structural properties in large (45 nm) and small (9 nm) FexO/Fe3O4 core/shell nanoparticles that can explain the spread of magnetic behaviors. The results reveal that while the FexO core in the large nanoparticles is antiferromagnetic and has bulk-like stoichiometry and unit-cell parameters, the FexO core in the small particles is highly non-stoichiometric and strained, displaying no significant antiferromagnetism. These results highlight the importance of ample characterization to fully understand the properties of nanostructured metal oxides.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Structurally and mechanically tunable molybdenum oxide films and patterned submicrometer structures by electrodeposition

  • Quintana, Alberto|||0000-0002-9813-735X
  • Varea Espelt, Aïda
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
1.5 μm-thick molybdenum oxide films have been electrodeposited potentiostatically from 0.2 M Na₂MoO₄ electrolyte onto indium tin oxide (ITO)/glass substrates at pH = 1, 6 and 9. The influence of cetyltrimethylammonium bromide (CTAB) surfactant on films' adhesion, morphology, degree of porosity, molybdenum speciation, and crystallographic structure has been systematically investigated. The addition of CTAB (0.01 M) to the bath clearly improves film adherence to the substrate, reduces cracking, and increases crystallinity. This has an impact on the physical properties of the films. In particular, both hardness (H) and Young's modulus (E) increase, as determined from nanoindentation tests. The growth of ordered arrays of molybdenum oxide submicrometer structures, including pillars and stripes, by electrodeposition onto e-beam lithographed Au/Ti/Si substrates is also reported.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanostructured Ti-Zr-Pd-Si-(Nb) bulk metallic composites, novel biocompatible materials with superior mechanical strength and elastic recovery

  • Hynowska, Anna
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Pellicer, Eva|||0000-0002-8901-0998
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Gebert, A.
  • Calin, Mariana
  • Eckert, Jürgen|||0000-0003-4112-3181
  • Nogués, Carme|||0000-0002-6361-8559
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Barrios, Leonardo|||0000-0002-6151-8503
  • Sort, Jordi|||0000-0003-1213-3639
The microstructure, mechanical behaviour, and biocompatibility (cell culture, morphology, and cell adhesion) of nanostructured Ti45 Zr15 Pd35- x Si5 Nbx with x = 0, 5 (at. %) alloys, synthesized by arc melting and subsequent Cu mould suction casting, in the form of rods with 3 mm in diameter, are investigated. Both Ti-Zr-Pd-Si-(Nb) materials show a multi-phase (composite-like) microstructure. The main phase is cubic β-Ti phase (Im3m) but hexagonal α-Ti (P63/mmc), cubic TiPd (Pm3m), cubic PdZr (Fm3m), and hexagonal (Ti, Zr)5 Si3 (P63/mmc) phases are also present. Nanoindentation experiments show that the Ti45 Zr15 Pd30 Si5 Nb5 sample exhibits lower Young's modulus than Ti45 Zr15 Pd35 Si5 . Conversely, Ti45 Zr15 Pd35 Si5 is mechanically harder. Actually, both alloys exhibit larger values of hardness when compared with commercial Ti-40Nb, (HTi-Zr-Pd-Si ≈ 14 GPa, HTi-Zr-Pd-Si-Nb ≈ 10 GPa and HTi-40Nb ≈ 2.7 GPa). Concerning the biological behaviour, preliminary results of cell viability performed on several Ti-Zr-Pd-Si-(Nb) discs indicate that the number of live cells is superior to 94% in both cases. The studied Ti-Zr-Pd-Si-(Nb) bulk metallic system is thus interesting for biomedical applications because of the outstanding mechanical properties (relatively low Young's modulus combined with large hardness), together with the excellent biocompatibility.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of the electrodeposition potential on the crystallographic structure and effective magnetic easy axis of cobalt nanowires

  • Isrhad, M. I.
  • Mohamed, N. M.
  • Abdullah, M. Z.
  • Saheed, M. S. M.
  • Mumtaz, A.
  • Yasar, M.
  • Yar, A.
  • Zeeshan, M. Arif
  • Sort, Jordi|||0000-0003-1213-3639
Cobalt nanowires (NWs) have been synthesized by electrodeposition inside the pores of anodized aluminium oxide templates, at different values of applied deposition potential. The as-deposited NWs are parallel to one another and exhibit a high geometrical aspect ratio. The crystal structure of these NWs shows a strong dependence on the applied deposition potential during synthesis. X-ray diffraction indicates the predominance of hexagonal-closed-packed (HCP) phase with (002) texture at low applied deposition potentials, whereas a reorientation of the c-axis of the HCP structure is observed for high electrodeposition potentials. Moreover, for a given electrodeposition time, the length of the NWs also increases with the applied potential. As a result of these structural changes, a switch in the magnetic easy axis, from parallel to perpendicular to the NWs axis, occurs depending on the applied potential. A simplified model is used to account for this reorientation of the effective magnetic anisotropy direction, which takes into account the interplay between shape anisotropy, magnetocrystalline anisotropy and interwire dipolar interactions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochemically synthesized amorphous and crystalline nanowires: dissimilar nanomechanical behavior in comparison with homologous flat films

  • Zeeshan, M. Arif
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Castro-Hartmann, Pablo|||0000-0002-8991-9560
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Nogués, Josep|||0000-0003-4616-1371
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The effects of constrained sample dimensions on the mechanical behavior of crystalline materials have been extensively investigated. However, there is no clear understanding of these effects in nano-sized amorphous samples. Herein, nanoindentation together with finite element simulations are used to compare the properties of crystalline and glassy CoNi(Re)P electrodeposited nanowires (ϕ ≈ 100 nm) with films (3 μm thick) of analogous composition and structure. The results reveal that amorphous nanowires exhibit a larger hardness, lower Young's modulus and higher plasticity index than glassy films. Conversely, the very large hardness and higher Young's modulus of crystalline nanowires are accompanied by a decrease in plasticity with respect to the homologous crystalline films. Remarkably, proper interpretation of the mechanical properties of the nanowires requires taking the curved geometry of the indented surface and sink-in effects into account. These findings are of high relevance for optimizing the performance of new, mechanically-robust, nanoscale materials for increasingly complex miniaturized devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Toward uniform electrodeposition of magnetic Co-W mesowires arrays, direct versus pulse current deposition

  • Tsyntsaru, N.
  • Silkin, S.
  • Cesiulis, Henrikas|||0000-0002-5077-7884
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Template-assisted electrodeposition of Co-rich Co-W alloys into mesoporous anodized aluminum oxide from ammonia-free solutions is investigated. The optimum deposition conditions rendering uniform filling of the pores, either by direct current (DC) or pulse current (PC) methods, are established. Contrary to the DC deposition on flat surfaces (which is kinetically controlled), the DC electrodeposition in the mesopores of the template is limited by mass transfer. Conversely, under PC mode, the Co-W electrodeposition process is controlled by kinetics at frequencies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling the collective magnetic behavior of highly-packed arrays of multi-segmented nanowires

  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Pellicer, Eva|||0000-0002-8901-0998
  • Zhang, Jin
  • Nogués, Josep|||0000-0003-4616-1371
  • Navau, Carles|||0000-0003-4763-5305
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Sort, Jordi|||0000-0003-1213-3639
A powerful model to evaluate the collective magnetic response of large arrays of segmented nanowires comprising two magnetic segments of dissimilar coercivity separated by a non-magnetic spacer is introduced. The model captures the essential aspects of the underlying physics in these systems while being at the same time computationally tractable for relatively large arrays. The minimum lateral and vertical distances rendering densely packed weakly-interacting nanowires and segments are calculated for optimizing their performance in applications like magnetic sensors or recording media. The obtained results are appealing for the design of multifunctional miniaturized devices actuated by external magnetic fields, whose successful implementation relies on achieving a delicate balance between two opposing technological demands: the need for an ultra-high density of nanowires per unit area and the minimization of inter-wire and inter-segment dipolar interactions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tailoring staircase-like hysteresis loops in electrodeposited trisegmented magnetic nanowires, a strategy toward minimization of interwire interactions

  • Zhang, Jin
  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Baró, M. D.|||0000-0002-8636-1063
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A new strategy to minimize magnetic interactions between nanowires (NWs) dispersed in a fluid is proposed. Such a strategy consists of preparing trisegmented NWs containing two antiparallel ferromagnetic segments with dissimilar coercivity separated by a nonmagnetic spacer. The trisegmented NWs exhibit a staircase-like hysteresis loop with tunable shape that depends on the relative length of the soft- and hard-magnetic segments and the respective values of saturation magnetization. Such NWs are prepared by electrodepositing CoPt/Cu/Ni in a polycarbonate (PC) membrane. The antiparallel alignment is set by applying suitable magnetic fields while the NWs are still embedded in the PC membrane. Analytic calculations are used to demonstrate that the interaction magnetic energy from fully compensated trisegmented NWs with antiparallel alignment is reduced compared to a single-component NW with the same length or the trisegmented NWs with the two ferromagnetic counterparts parallel to each other. The proposed approach is appealing for the use of magnetic NWs in certain biological or catalytic applications where the aggregation of NWs is detrimental for optimized performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ni-, Pt- and (Ni/Pt)-doped TiO₂ nanophotocatalysts, a smart approach for sustainable degradation of Rhodamine B dye

  • Pol, Roberto|||0000-0002-4387-4061
  • Guerrero, Miguel|||0000-0001-8350-8261
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Altube, Ainhoa
  • Rossinyol Casals, Emma|||0000-0002-1656-1254
  • Garroni, Sebastiano|||0000-0001-7686-6589
  • Baró, M. D.|||0000-0002-8636-1063
  • Pons Picart, Josefina|||0000-0003-1834-9326
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Ni (1 wt%)-, Pt (1 wt%)- and [Ni (0.5 wt%)/Pt (0.5 wt%)]-doped TiO₂ nanoporous catalysts have been successfully obtained through a facile two-step hydrothermal route. TiO₂ crystallizes mostly in the anatase phase and acts as a mesoporous matrix. Meanwhile, Ni, Pt and Ni/Pt dopants form small nanoparticles (NPs) (3-95 nm in diameter) which are hosted by the TiO₂ framework. The resulting composites exhibit a rather large surface area, in the range of 186-200 m2/g. The band gap energy reduces from 3.03 eV for the undoped TiO₂ to 2.15 eV for the Pt-loaded TiO₂. As a consequence, absorption expands toward the visible light range. The photodegradation of Rhodamine B dye in aqueous medium has been investigated under UV-vis light irradiation. The presence of Ni, Pt and Ni/Pt NPs significantly enhances the photocatalytic activity of the material. Furthermore, the Ni-doped TiO₂ shows ferromagnetic behavior at room temperature, which makes its recovery and subsequent fast reutilization possible. Interestingly, this sample also exhibits the best stability upon recycling. Considering all the current challenges in sustainable water remediation, these new photocatalysts could find applications in real environmental contexts in the near future.
Dipòsit Digital de Documents de la UAB
Publicación Otros (Other)

Frontiers in Mesoporous Nanomaterials

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Understanding the mechanical behaviour of fiber/matrix interfaces during push-in tests by means of finite element simulations and a cohesive zone model

  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Ghisleni, Rudy
  • Battisti, Andrea
  • Mohanty, Gaurav|||0000-0002-0816-307X
  • Michler, Johann|||0000-0001-8860-4068
  • Brunner, Andreas J.
  • Sort, Jordi|||0000-0003-1213-3639
The present work represents a progress towards the understanding of the mechanical behavior of the fiber/matrix interface during push-in tests of fiber-reinforced polymer-matrix composites. Finite element simulations incorporating a cohesive zone model are used for this purpose. Different values of interface strength, interface fracture toughness, fiber diameter and friction coefficient are considered to study how they affect the load-displacement curves. A critical value of the displacement exists, being independent of the fiber diameter for given values of interface strength and fracture toughness, marking the separation between two regimes: (i) a cohesive-dominated zone interaction and (ii) a frictional contact between debonded fiber and matrix. Maps showing the different regimes are constructed, proving their helpfulness to tune the mechanical properties of the interface in order to favor a certain mechanical response. Finally, we study the debonding velocity and how this is affected by the mechanical properties of the interface providing an empirical relation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The influence of pore size on the indentation behavior of metallic nanoporous materials, a molecular dynamics study

  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
In general, the influence of pore size is not considered when determining the Young's modulus of nanoporous materials. Here, we demonstrate that the pore size needs to be taken into account to properly assess the mechanical properties of these materials. Molecular Dynamics simulations of spherical indentation experiments on single crystalline nanoporous Cu have been undertaken in systems with: (i) a constant degree of porosity and variable pore diameter; and (ii) a constant pore diameter and variable porosity degree. The classical Gibson and Ashby expression relating Young's modulus with the relative density of the nanoporous metal is modified to include the influence of the pore size. The simulations reveal that, for a fixed porosity degree, the mechanical behavior of materials with smaller pores differs more significantly from the behavior of the bulk, fully dense counterpart. This effect is ascribed to the increase of the overall surface area as the pore size is reduced, together with the reduced coordination number of the atoms located at the pores edges.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Room-temperature synthesis of three-dimensional porous ZnO@CuNi hybrid magnetic layers with photoluminescent and photocatalytic properties

  • Guerrero, Miguel|||0000-0001-8350-8261
  • Zhang, Jin
  • Altube, Ainhoa
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Roldán, Mónica
  • Pellicer, Eva|||0000-0002-8901-0998
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
A facile synthetic approach to prepare porous ZnO@CuNi hybrid films is presented. Initially, magnetic CuNi porous layers (consisting of phase separated CuNi alloys) are successfully grown by electrodeposition at different current densities using H₂ bubbles as a dynamic template to generate the porosity. The porous CuNi alloys serve as parent scaffolds to be subsequently filled with a solution containing ZnO nanoparticles previously synthesized by sol-gel. The dispersed nanoparticles are deposited dropwise onto the CuNi frameworks and the solvent is left to evaporate while the nanoparticles impregnate the interior of the pores, rendering ZnO-coated CuNi 3D porous structures. No thermal annealing is required to obtain the porous films. The synthesized hybrid porous layers exhibit an interesting combination of tunable ferromagnetic and photoluminescent properties. In addition, the aqueous photocatalytic activity of the composite is studied under UV-visible light irradiation for the degradation of Rhodamine B. The proposed method represents a fast and inexpensive approach towards the implementation of devices based on metal-semiconductor porous systems, avoiding the use of post-synthesis heat treatment steps which could cause deleterious oxidation of the metallic counterpart, as well as collapse of the porous structure and loss of the ferromagnetic properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochemical synthesis of bismuth particles, tuning particle shape through substrate type within a narrow potential window

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reusable and long-lasting active micro-cleaners for heterogeneous water remediation

  • Parmar, Jemish
  • Vilela, Diana
  • Pellicer, Eva|||0000-0002-8901-0998
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Sort, Jordi|||0000-0003-1213-3639
  • Sánchez Ordóñez, Samuel|||0000-0001-9713-9997
Self-powered micro-machines are promising tools for the future environmental remediation technology. Waste water treatment and water reuse is an essential part of environmental sustainability. Herein, we present reusable Fe/Pt multi-functional active micro-cleaners that are capable of degrading organic pollutants by generated hydroxyl radicals via Fenton-like reaction. Various different properties of micro-cleaners such as the effect of their size, short-term storage, long-term storage, reusability, continuous swimming capability, surface composition and mechanical properties are studied. We find that micro-cleaners can continuously swim for more than 24 hours and can be stored more than 5 weeks during multiple cleaning cycles. Micro-cleaners can also be reused, which reduces the cost of the process. Over the reuse cycles, the outer iron surface of the Fe/Pt micro-cleaners generates in-situ heterogeneous Fenton catalyst and releases a low concentration of iron into the treated water while the mechanical properties also appear to be improved due to both surface composition and structural changes. Results have been characterized by SEM, XPS, Nanoindentation and Finite Element Modeling (FEM).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunable high-field magnetization in strongly exchange-coupled freestanding Co/CoO core/shell coaxial nanowires

  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Geshev, Julian|||0000-0003-3730-3657
  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Navau, Carles|||0000-0003-4763-5305
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Josep|||0000-0003-4616-1371
The exchange bias properties of Co/CoO coaxial core/shell nanowires have been investigated with cooling and applied fields perpendicular to the wire axis. This configuration leads to unexpected exchange-bias effects. Firstly, the magnetization value at high fields is found to depend on the field-cooling conditions. This effect arises from the competition between the magnetic anisotropy and the Zeeman energies for cooling fields perpendicular to the wire axis. This allows imprinting pre-defined magnetization states to the AFM, as corroborated by micromagnetic simulations. Secondly, the system exhibits a high-field magnetic irreversibility, leading to open hysteresis loops, attributed to the AFM easy-axis reorientation during the reversal (effect similar to athermal training). A distinct way to manipulate the high-field magnetization in exchange-biased systems, beyond the archetypical effects, is thus experimentally and theoretically demonstrated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Toward robust segmented nanowires, understanding the impact of crystallographic texture on the quality of segment interfaces in magnetic metallic nanowires

  • Zhang, Jin
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Segmented nanowires (NWs) have found a wealth of applications due to their multifuctionality, arising from complementarities and synergies among segments of different materials. However, to ensure a practical use of segmented NWs, high quality interfaces between dissimilar segments must be ensured. Herein, tri-segmented CoPt/Cu/Ni NWs and bi-segmented CoPt/Ni magnetic NWs are fabricated by means of template-assisted electrodeposition and the characteristics of their interfaces are investigated in detail. The presence of a Cu segment sandwiched between the CoPt and the Ni segments severely affects the integrity of the whole NW. Namely, Cu deposits in a (200) textured face-centered cubic (fcc) structure, which cannot accommodate well on the c-axis oriented hexagonal close-packed CoPt. Instead, when the Cu segment is absent, well-connected CoPt/Ni NWs with smooth interface are obtained. Unlike the Cu segment, Ni shows the (111) textured fcc structure, which holds good crystallographic matching with the underlying CoPt segment. Magnetic measurements reveal that CoPt/Ni NWs exhibit staircase-like hysteresis loops similar to the tri-segmented CoPt/Cu/Ni NWs. Such loop shape stems from the dissimilar coercivity between the hard (CoPt) and soft (Ni) segments. The bi-segmented NWs (with robust interfaces) are appealing for multi-bit recording media, magnetic nanoelectromechanical systems and magnetically-driven wireless drug delivery nanoplatforms.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electron energy-loss spectroscopic tomography of FeₓCo(₃₋ₓ)O₄ impregnated Co₃O₄ mesoporous particles, unraveling the chemical information in three dimensions

  • Yedra Cardona, Lluís|||0000-0003-1818-9836
  • Eljarrat Ascunce, Alberto
  • Arenal, Raúl|||0000-0002-2071-9093
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Pellicer, Eva|||0000-0002-8901-0998
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Sort, Jordi|||0000-0003-1213-3639
  • Baró, M. D.|||0000-0002-8636-1063
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiró, Francisca
Electron energy-loss spectroscopy - spectrum image (EELS-SI) tomography is a powerful tool to investigate the three dimensional chemical configuration in nanostructures. Here, we demonstrate, for the first time, the possibility to characterize the spatial distribution of Fe and Co cations in a complex FFeₓCo(₃₋ₓ)O₄/Co₃O₄ ordered mesoporous system. This hybrid material is relevant because of the ferrimagnetic/antiferromagnetic coupling and high surface area. We unambiguously prove that the EELS-SI tomography shows a sufficiently high resolution to simultaneously unravel the pore structure and the chemical signal.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sub-micron magnetic patterns and local variations of adhesion force induced in non-ferromagnetic amorphous steel by femtosecond pulsed laser irradiation

  • Zhang, Huiyan
  • Feng, Yuping
  • Nieto, Daniel
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Mcdaniel, Clare
  • Díaz Marcos, Jordi
  • Flores-Arias, María Teresa
  • O'connor, Gerard M.
  • Baró, M. D.|||0000-0002-8636-1063
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Periodic ripple and nanoripple patterns are formed at the surface of amorphous steel after femtosecond pulsed laser irradiation (FSPLI). Formation of such ripples is accompanied with the emergence of a surface ferromagnetic behavior which is not initially present in the non-irradiated amorphous steel. The occurrence of ferromagnetic properties is associated with the laser-induced devitrification of the glassy structure to form ferromagnetic (α-Fe and Fe₃C) and ferrimagnetic [(Fe,Mn)₃O₄ and Fe₂CrO4] phases located in the ripples. The generation of magnetic structures by FSPLI turns out to be one of the fastest ways to induce magnetic patterning without the need of any shadow mask. Furthermore, local variations of the adhesion force, wettability and nanomechanical properties are also observed and compared to those of the as-cast amorphous alloy. These effects are of interest for applications (e.g., biological, magnetic recording, etc.) where both ferromagnetism and tribological/adhesion properties act synergistically to optimize material performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrodeposition of sizeable and compositionally tunable rhodium-iron nanoparticles and their activity toward hydrogen evolution reaction

  • Golvano Escobal, Irati|||0000-0001-8518-8185
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Rh-Fe nanoparticles (NPs) with variable Rh/Fe ratios have been obtained by direct current electrodeposition onto Au-metalized Si/Ti substrates from an electrolyte containing Rh(III) and Fe(III) chloride salts. NP mean diameter could be varied in the range of 20-80 nm by playing with the applied current density (-j = 0.5-2 mA cm-2) and deposition times (t = 200-3200 s). NPs were very well adhered to the substrate and became progressively enriched in Fe as the absolute value of the current density increased. X-ray photoelectron spectroscopy analyses revealed that the NPs are mostly metallic. The oxygen signal detected at surface level is relatively high but reduces down to less than 1 at% after 1 min Ar ions sputtering. The as-deposited Rh-Fe NPs are active toward hydrogen evolution reaction in alkaline medium. Different values of the onset potential for water reduction have been observed depending on the j and t values applied for NPs growth. Cycling stability tests reveal that NPs do not suffer from excessive deterioration of their electrocatalytic activity with time.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochemical deposition of NiMnGa alloys

  • Özkale, Berna|||0000-0002-3016-9363
  • Mushtaq, Fajer
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Sort, Jordi|||0000-0003-1213-3639
  • Muller Jevenois, Carlos
  • Pellicer, Eva|||0000-0002-8901-0998
An electrochemical synthesis route for NiMnGa alloys is presented. Thin films (TFs) of NiMnGa were fabricated by single step electrodeposition from aqueous electrolytes using direct current (DC) over a range of current densities. By meticulous electrolyte tuning, homogeneous TFs with high Ga and Mn content could be achieved at current densities as high as -400 mA cm-2. Detailed compositional analysis of the alloys showed that growth was homogeneous and oxygen content was minimized. TFs plated at very low current densities were found to be nanocrystalline/ amorphous. In order to obtain fully crystalline samples, thermal annealing was carried out. Mechanical characterization was assessed by nanoindentation, and the effect of Ga content on mechanical properties was investigated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Characterization of Ferrofluid-based Stimuli-responsive Elastomers

  • Pedro, Sandra de
  • Muñoz-Berbel, Xavier|||0000-0002-6447-5756
  • Rodríguez-Rodríguez, Rosalía
  • Sort, Jordi|||0000-0003-1213-3639
Stimuli-responsive materials undergo physicochemical, and/or structural changes when a specific actuation is applied. They are heterogeneous composites, consisting of a non-responsive matrix where functionality is provided by the filler. Surprisingly, the synthesis of Polydimethylsiloxane (PDMS)-based stimuli-responsive elastomers (SRE) has seldomly been presented. Here we present the structural, biological, optical, magnetic and mechanical properties of several magnetic SRE (M-SRE) obtained by combining PDMS and isoparafin-based ferrofluid (FF). Independently of the FF concentration, results shown a similar aggregation level, with the nanoparticles (NP) mostly isolated (.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly efficient electrochemical and chemical hydrogenation of 4-nitrophenol using recyclable narrow mesoporous magnetic CoPt nanowires

  • Serrà, Albert|||0000-0003-0147-3400
  • Alcobé, Xavier
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Josep|||0000-0003-4616-1371
  • Vallés, Elisa
Toxic nitro-compounds, such as 4-nitrophenol, are one of the most common wastewater industrial pollutants. Thus, efficient ways to neutralize them are actively pursued. Here novel procedures to degrade this type of compounds based on the use of mesoporous magnetic nanowires are demonstrated. Fully-mesoporous magnetic narrow (25 nm) CoPt nanowires with an extraordinary effective area are grown by ionic liquid-in-water microemulsions in alumina templates. These mesoporous nanowires are shown to be efficient catalysts for the hydrogenation of 4-nitrophenol by electro-catalysis. Additionally, these nanowires also present an exceptional conventional catalytic activity when used in conjunction with NaBH4, particularly when magnetic stirring is utilized. In fact, magnetically actuated mesoporous CoPt nanowires drastically outperform all state-of-the-art 4-nitrophenol catalysts. Additionally, given their magnetic character, these nanowires can be easily recycled and reused. Thus, the outstanding catalytic performance of mesoporous CoPt nanowires makes them excellent candidates for wastewater treatment agents.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Novel Fe-Mn-Si-Pd alloys: insights on mechanical, magnetic, corrosion performance and biocompatibility

  • Feng, Yuping
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Zhang, Huiyan
  • Solsona, Pau|||0000-0001-9274-2447
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Barrios, Leonardo|||0000-0002-6151-8503
  • Pellicer, Eva|||0000-0002-8901-0998
  • Nogués, Carme|||0000-0002-6361-8559
  • Sort, Jordi|||0000-0003-1213-3639
Two new Fe-based alloys, Fe-10Mn6Si1Pd and Fe-30Mn6Si1Pd, have been fabricated by arc-melting followed by copper mold suction casting. The Fe-30Mn6Si1Pd alloy mainly consists of ε-martensite and γ-austenite Fe-rich phases whereas the Fe-10Mn6Si1Pd alloy primarily contains α-Fe(Mn)-ferrite phase. Additionally, Pd-rich precipitates were detected in both alloys. Good mechanical response was observed by nanoindentation: hardness values around 5.6 GPa and 4.2 GPa and reduced Young's modulus values of 125 GPa and 93 GPa were measured for the as-prepared Fe-10Mn6Si1Pd and Fe-30Mn6Si1Pd alloys, respectively. Both alloys are thus harder and exhibit lower Young's modulus than 316L stainless steel, which is one of the most common Fe-based reference materials for biomedical applications. Compared with the ferromagnetic Fe-10Mn6Si1Pd alloy, the paramagnetic Fe-30Mn6Si1Pd alloy is more appropriate to be used as an implant since it would be compatible with nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) analyses. Concerning biocompatibitliy, the more hydrophilic Fe-10Mn6Si1Pd shows improved cell adhesion but its pronounced ion leaching has a negative effect on the proliferation of cells. The influence of immersion in simulated body fluid on composition, microstructure, mechanical and magnetic properties of both alloys is assessed, and the correlation between microstructure evolution and physical properties is discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Conformal oxide nanocoatings on electrodeposited 3D porous Ni films by atomic layer deposition

  • Zhang, Jin
  • Coll, Maria Dolors
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A versatile chemical synthesis procedure to obtain Al2O3 and Co2FeO4 nanolayers conformally coating a three-dimensional (3D) porous Ni film is presented. First, porous Ni is grown by hydrogen bubble template-assisted electrodeposition. Subsequently, Al2O3 and Co2FeO4 layers, with thickness ranging from 5 nm to 25 nm, are directly deposited onto the pore walls by atomic layer deposition, while maintaining the porous architecture and magnetic properties of the Ni scaffold. The crystal structure, thickness and distribution of elements within the composite coatings are investigated in detail. The resulting magnetic and wettability properties are assessed. Contact angle tests reveal that 3D porous Ni films become more hydrophilic after coating with Al2O3 or Co2FeO4. From a technological point of view, the obtained composite porous films could be appealing for applications like magnetically-actuated micro/nano-electromechanical systems (MEMS/NEMS) or bio-MEMS/NEMS, among others.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Composite films combining electrospun fiber network and epitaxial oxide by chemical solution deposition

  • Calleja, Ana
  • Sort, Jordi|||0000-0003-1213-3639
  • Ricart, Susana|||0000-0003-4196-2081
  • Granados García, Xavier
  • Palmer, Xavier
  • Vlad, Valentina Roxana
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
We report the preparation of a novel type of composites films by chemical solution deposition. It consists of an epitaxial oxide on a single crystal template inside which an oxide fiber network is dispersed. Electrospinning is used for the deposition of the fiber network whereas the continuous epitaxial phase is spin-coated. Good coating is observed between the liquid precursor of the continuous oxide and the fibers and remarkably, epitaxial (001) growth of the YBa2Cu3O7-x is not affected by the presence of the fiber network because both oxides do not react to each other. Topological continuity of the continuous phase is probed by electrical conductivity measurements, rendering nearly the same values reported for fiber-free films. Mechanical properties are determined by nanoindentation at low penetration depths to avoid the effect of the single crystal beneath the composite. Enhanced mechanical properties are found (hardness, Young's modulus, elastic recovery and wear resistance).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Antimicrobial and wear performance of Cu-Zr-Al metallic glass composites

  • Villapún, Victor M.
  • Zhang, Huiyan
  • Howden, C.
  • Sort, Jordi|||0000-0003-1213-3639
The antimicrobial and wear behaviour of metallic glass composites corresponding to the Cu50+x(Zr44Al6)50-x system with x=(0, 3 and 6) has been studied. The three compositions consist of crystalline phases embedded in an amorphous matrix and they exhibit crystallinity increase with increasing copper content, i.e., decrease of the glass-forming ability. The wear resistance also increases with the addition of copper as indirectly assessed from H/Er and H3/Er2 parameters obtained from nanoindentation tests. These results are in agreement with scratch tests since for the alloy with highest Cu content, i.e., Cu56Zr38.7Al5.3, reveals a crack increase, lower pile-up, prone adhesion wear in dry sliding and higher scratch groove volume to pile-up volume. Samples with higher Cu content revealed higher hydrophilicity. Time-kill studies revealed higher reduction in colony-forming units for E. coli (gram-negative) and B. subtilis (gram-positive) after 60 min of contact time for the Cu56Zr38.7Al5.3 alloy and all the samples achieved a complete elimination of bacteria in 250 min.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cross-sectioning spatio-temporal Co-In electrodeposits: disclosing a magnetically-patterned nanolaminated structure

  • Golvano Escobal, Irati|||0000-0001-8518-8185
  • Sirvent, Juan de Dios
  • Ferran, Marta|||0000-0003-1198-0641
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Micrometer-thick cobalt-indium (Co-In) films consisting of self-assembled layers parallel to the cathode plane, and with a periodicity of 175 ± 25 nm, have been fabricated by electrodeposition at a constant current density. These films, which exhibit spatio-temporal patterns on the surface, grow following a layer-by-layer mode. Films cross-sections were characterized by electron microscopies and electron energy loss spectroscopy. Results indicate the spontaneous formation of nanolayers that span the whole deposit thickness. A columnar structure was revealed inside each individual nanolayer which, in turn, was composed of well-distinguished In- and Co-rich regions. Due to the dissimilar magnetic character of these regions, a periodic magnetic nanopatterning was observed in the cross-sectioned films, as shown by magnetic force microscopy studies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanomechanical behaviour of open-cell nanoporous metals: homogeneous versus thickness-dependent porosity

  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Zhang, Jin
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Two dierent nanoporous materials, porous copper prepared by dealloying and porous nickel prepared by electrodeposition, have been studied by means of nanoindentation experiments at dierent maximum applied loads. While nanoporous Cu is homogeneous along its cross-section, the electrodeposited Ni lms show a graded porosity, with smaller pores and thicker pore walls close to the lm's surface. The mechanical properties of the two materials have been extracted using a methodology based on scaling laws and subsequent interpretation has been performed using nite element simulations. Two dierent deformation mechanisms are observed for nanoporous Cu and nanoporous Ni, respectively. Dealloyed porous copper behaves as an homogeneous material without evident eect of densication and with mechanical properties that are independent of the applied load. Given this homogeneity, it is possible to t the entire loading - unloading curve for dierent maximum applied loads with a single set of mechanical properties. Conversely, electrodeposited porous nickel shows a decrease in the reduced Young's modulus, an increase in yield stress and a constant hardness when the maximum applied load during nanoindentation is increased. While the decrease in the reduced Young's modulus can be explained in the context of thickness inhomogeneity of the electrodeposited porous nickel (i.e., increase of porosity with depth), this cannot explain, and actually would go against, the observed increase in the yield stress, which is instead associated to the decrease in the ligament size.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanocasting synthesis of mesoporous SnO₂ with a tunable ferromagnetic response through Ni loading

  • Fan, Junpeng|||0000-0003-2243-5251
  • Zhang, Jin
  • Solsona, Pau|||0000-0001-9274-2447
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Undoped and Ni-doped ordered mesoporous SnO₂ powders ([Ni(II)]/[Sn(II)] = 0 : 100, 5 : 95, 15 : 85, 20 : 80) were synthesized by nanocasting from mesoporous KIT-6 silica. The resulting Ni content in the Ni-loaded powders ranged between 1 at% and 9 at%. Successful replication of the silica template was verified by scanning electron microscopies for all samples. Residual silicon content did not surpass 4 at%. X-ray diffraction analyses showed that the powders were nanocrystalline, being the rutile-like phase of SnO₂ the dominant structure. Changes in the lattice constants depending on the Ni content were observed, suggesting that Ni enters the rutile structure of SnO₂ to some extent. No extra phases attributed to Ni were detected in the powders except for the sample synthesized from 20 : 80 [Ni(II)]/[Sn(II)], for which NiO as secondary phase was observed. The oxidation state and spatial distribution of Ni in the powders was investigated by X-ray photoelectron spectroscopy (XPS) and electron energy loss spectroscopy (EELS) measurements, respectively. For 6 at% and 9 at% Ni content, the presence of Ni2+ was established. The corresponding EELS mapping showed that a fraction of Ni (the one not forming part of the rutile phase) tended to accumulate at the pore edges, forming a nanometer-thick NiO layer. Compared to undoped SnO₂, Ni-containing powders exhibit a ferromagnetic response at low and room temperatures. Uncompensated spins at the surface of NiO are likely to contribute, in part, to the observed ferromagnetic properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetometry of individual polycrystalline ferromagnetic nanowires

  • Shamsudhin, Naveen
  • Tao, Ye|||0000-0002-3963-6079
  • Sort, Jordi|||0000-0003-1213-3639
  • Jang, Bumjin
  • Degen, Christian L.
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Ferromagnetic nanowires are finding use as untethered sensors and actuators for probing micro- and nanoscale biophysical phenomena, such as for localized sensing and application of forces and torques on biological samples, for tissue heating through magnetic hyperthermia, and for micro-rheology. Quantifying the magnetic properties of individual isolated nanowires is crucial for such applications. We use dynamic cantilever magnetometry to measure the magnetic properties of individual sub-500nm diameter polycrystalline nanowires of Ni and Ni80Co20 fabricated by template-assisted electrochemical deposition. The values are compared with bulk, ensemble measurements when the nanowires are still embedded within their growth matrix. We find that single-particle and ensemble measurements of nanowires yield significantly different results that reflect inter-nanowire interactions and chemical modifications of the sample during the release process from the growth matrix. The results highlight the importance of performing single-particle characterization for objects that will be used as individual magnetic nanoactuators or nanosensors in biomedical applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanoindenting the Chelyabinsk meteorite to learn about impact deflection effects in asteroids

  • Moyano-Cambero, Carles Eduard|||0000-0002-1543-8377
  • Pellicer, Eva|||0000-0002-8901-0998
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Williams, Iwan P.
  • Blum, Jürgen
  • Michel, Patrick
  • Küppers, Michael
  • Martínez-Jiménez, Marina
  • Lloro, Ivan|||0000-0001-5966-1434
  • Sort, Jordi|||0000-0003-1213-3639
The Chelyabinsk meteorite is a highly shocked, low porosity, ordinary chondrite, probably similar to S- or Q-type asteroids. Therefore, nanoindentation experiments on this meteorite allow us to obtain key data to understand the physical properties of near-Earth asteroids (NEAs). Tests at different length scales provide information about the local mechanical properties of the minerals forming this meteorite: reduced Young's modulus, hardness, elastic recovery, and fracture toughness. Those tests are also useful to understand the potential to deflect threatening asteroids using a kinetic projectile. We found that the differences in mechanical properties between regions of the meteorite, which increase or reduce the efficiency of impacts, are not a result of compositional differences. A low mean particle size, attributed to repetitive shock, can increase hardness, while low porosity promotes a higher momentum multiplication. Momentum multiplication is the ratio between the change in momentum of a target due to an impact, and the momentum of the projectile, and therefore higher values imply more efficient impacts. In the Chelyabinsk meteorite the properties of the light-colored lithology materials facilitate obtaining higher momentum multiplication values, compared to the other regions described for this meteorite. Also, we found a low value of fracture toughness in the shock-melt veins of Chelyabinsk, which would promote the ejection of material after an impact and therefore increase the momentum multiplication. These results are relevant in the context of a future mission to test asteroid deflection, currently being studied by ESA and NASA: the Asteroid Impact and Deflection Assessment (AIDA) mission.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Spontaneous formation of spiral-like patterns with distinct periodic physical properties by confined electrodeposition of Co-In disks

  • Golvano Escobal, Irati|||0000-0001-8518-8185
  • Gonzalez-Rosillo, Juan Carlos
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Illa, Xavi|||0000-0002-3212-1128
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Solsona, Pau|||0000-0001-9274-2447
  • Aballe, Lucía|||0000-0003-1810-8768
  • Foerster, Michael|||0000-0002-4147-6668
  • Baró, M. D.|||0000-0002-8636-1063
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Spatio-temporal patterns are ubiquitous in different areas of materials science and biological systems. However, typically the motifs in these types of systems present a random distribution with many possible different structures. Herein, we demonstrate that controlled spatio-temporal patterns, with reproducible spiral-like shapes, can be obtained by electrodeposition of Co-In alloys inside a confined circular geometry (i.e., in disks commensurate with the typical size of the spatio-temporal features). These patterns are mainly of compositional nature, i.e., with virtually no topographic features. Interestingly, the local changes in composition lead to a periodic modulation of the physical (electric, magnetic and mechanical) properties. Namely, the Co-rich areas show higher saturation magnetization and electrical conductivity and are mechanically harder than the In-rich ones. Thus, this work reveals that confined electrodeposition of this binary system constitutes an effective procedure to attain template-free magnetic, electric and mechanical surface patterning with specific and reproducible shapes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effect of surface modifications of Ti40Zr10Cu38Pd12 bulk metallic glass and Ti-6Al-4V alloy on human osteoblasts in vitro biocompatibility

  • Blanquer, Andreu|||0000-0002-3551-1885
  • Hynowska, Anna
  • Nogués, Carme|||0000-0002-6361-8559
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Sort, Jordi|||0000-0003-1213-3639
  • Baró, M. D.|||0000-0002-8636-1063
  • Özkale, Berna|||0000-0002-3016-9363
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Pellicer, Eva|||0000-0002-8901-0998
  • Barrios, Leonardo|||0000-0002-6151-8503
The use of biocompatible materials, including bulk metallic glasses (BMGs), for tissue regeneration and transplantation is increasing. The good mechanical and corrosion properties of Ti40Zr10Cu38Pd12 BMG and its previously described biocompatibility makes it a potential candidate for medical applications. However, it is known that surface properties like topography might play an important role in regulating cell adhesion, proliferation and differentiation. Thus, in the present study, Ti40Zr10Cu38Pd12 BMG and Ti6-Al-4V alloy were surface-modified electrochemically (nanomesh) or physically (microscratched) to investigate the effect of material topography on human osteoblasts cells (Saos-2) adhesion, proliferation and differentiation. For comparative purposes, the effect of mirror-like polished surfaces was also studied. Electrochemical treatments led to a highly interconnected hierarchical porous structure rich in oxides, which have been described to improve corrosion resistance, whereas microscratched surfaces showed a groove pattern with parallel trenches. Cell viability was higher than 96% for the three topographies tested and for both alloy compositions. In all cases, cells were able to adhere, proliferate and differentiate on the alloys, hence indicating that surface topography plays a minor role on these processes, although a clear cell orientation was observed on microscratched surfaces. Overall, our results provide further evidence that Ti40Zr10Cu38Pd12 BMG is an excellent candidate, in the present two topographies, for bone repair purposes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Biodegradable FeMnSi sputter-coated macroporous polypropylene membranes for the sustained release of drugs

  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Soriano Martín, Jorge|||0000-0003-3295-7643
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Sirvent, Juan de Dios
  • Ferran, Marta|||0000-0003-1198-0641
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Barrios, Leonardo|||0000-0002-6151-8503
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Nogués, Carme|||0000-0002-6361-8559
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Pure Fe and FeMnSi thin films were sputtered on macroporous polypropylene (PP) membranes with the aim to obtain biocompatible, biodegradable and, eventually, magnetically-steerable platforms. Room-temperature ferromagnetic response was observed in both Fe- and FeMnSi-coated membranes. Good cell viability was observed in both cases by means of cytotoxicity studies, though the FeMnSi-coated membranes showed higher biodegradability than the Fe-coated ones. Various strategies to functionalize the porous platforms with transferrin-Alexa Fluor 488 (Tf-AF488) molecules were tested to determine an optimal balance between the functionalization yield and the cargo release. The distribution of Tf-AF488 within the FeMnSi-coated PP membranes, as well as its release and uptake by cells, was studied by confocal laser scanning microscopy. A homogeneous distribution of the drug within the membrane skeleton and its sustained release was achieved after three consecutive impregnations followed by the addition of a layer made of gelatin and maltodextrin, which prevented exceedingly fast release. The here-prepared organic-inorganic macroporous membranes could find applications as fixed or magnetically-steerable drug delivery platforms.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrodeposited Ni-based magnetic mesoporous films as smart surfaces for atomic layer deposition: an 'all-chemical' deposition approach toward 3D nanoengineered composite layers

  • Zhang, Jin
  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Coll, Maria Dolors
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Mesoporous Ni and Cu-Ni (Cu₂₀Ni₈₀ and Cu₄₅Ni₅₅ in at. %) films, showing a three-dimensional (3D) porous structure and tunable magnetic properties, are prepared by electrodeposition from aqueous surfactant solutions using micelles of P-123 triblock copolymer as structure-directing entities. Pores between 5 and 30 nm and dissimilar space arrangements (continuous interconnected networks, circular pores, corrugated mesophases) are obtained depending on the synthetic conditions. X-ray diffraction studies reveal that the Cu-Ni films have crystallized in the face-centered cubic structure, are textured, and exhibit certain degree of phase separation, particularly those with a higher Cu content. Atomic layer deposition (ALD) is used to conformally coat the mesopores of Cu₂₀Ni₈₀ film with amorphous Al₂O₃, rendering multiphase "nano-in-meso" metal-ceramic composites without compromising the ferromagnetic response of the metallic scaffold. From a technological viewpoint, these 3D nanoengineered composite films could be appealing for applications like magnetically actuated micro/nanoelectromechanical systems (MEMS/NEMS), voltage-driven magneto-electric devices, capacitors, or as protective coatings with superior strength and tribological performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanoporous Fe-based alloy prepared by selective dissolution, an effective Fenton catalyst for water remediation

  • Zhang, Huiyan
  • Feng, Yuping
  • Cheng, Yangyang
  • Baró, M. D.|||0000-0002-8636-1063
  • Altube, Ainhoa
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Alcaide, Francisco|||0000-0002-3373-3978
  • Pellicer, Eva|||0000-0002-8901-0998
  • Zhang, Tao
  • Sort, Jordi|||0000-0003-1213-3639
A fully nanoporous Fe-rich alloy, prepared by selective dissolution of melt-spun Fe₄₃.₅Cu₅₆.₅ ribbons, exhibits outstanding properties as a heterogeneous Fenton catalyst toward the degradation of methyl orange (MO) in aqueous solution. In addition, the ferromagnetic characteristics of this material enable its wireless manipulation toward specific locations within polluted wastewater. The influence of selective dissolution on the microstructure, sample morphology (surface and cross-section), elemental composition, and magnetic properties of the resulting nanoporous alloy is investigated. The dealloying procedure enhances the saturation magnetization and drastically increases the catalytic performance (i.e., the time required for full degradation of MO from the medium is reduced by a factor of approximately 2 by subjecting the Fe43.5Cu56.5 ribbons to prior dealloying). Remarkably, the effectiveness of this nanoporous material surpasses the results obtained by the homogeneous Fenton reaction using an equivalent concentration of Fe cations leached into the media from the nanoporous alloy. The different factors that promote the high catalytic activity are discussed. The outstanding catalytic activity, together with the simplicity of the synthetic procedure, makes this material very appealing for water remediation using advanced Fenton processes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electric-field adjustable time-dependent magnetoelectric response in martensitic FeRh alloy

  • Fina, Ignasi|||0000-0003-4182-6194
  • Quintana, Alberto|||0000-0002-9813-735X
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Martí Rovirosa, Xavier
  • Macià, Ferran|||0000-0001-5972-4810
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Sort, Jordi|||0000-0003-1213-3639
Steady or dynamic magnetoelectric response, selectable and adjustable by only varying the amplitude of the applied electric field, is found in a multiferroic FeRh/PMN-PT device. In-operando time-dependent structural, ferroelectric, and magnetoelectric characterizations provide evidence that, as in magnetic shape memory martensitic alloys, the observed distinctive magnetoelectric responses are related to the time-dependent relative abundance of antiferromagnetic-ferromagnetic phases in FeRh, unbalanced by voltage-controlled strain. This flexible magnetoelectric response can be exploited not only for energy-efficient memory operations but also in other applications, where multilevel and/or transient responses are required.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ferroelectrics as smart mechanical materials

  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Abdollahi, Amir|||0000-0003-0363-4984
  • Sort, Jordi|||0000-0003-1213-3639
  • Catalan, Gustau|||0000-0003-0214-4828
The mechanical properties of materials are insensitive to space inversion, even when they are crystallographically asymmetric. In practice, this means that turning a piezoelectric crystal upside down or switching the polarization of a ferroelectric should not change its mechanical response. Strain gradients, however, introduce an additional source of asymmetry that has mechanical consequences. Using nanoindentation and contact-resonance force microscopy, this study demonstrates that the mechanical response to indentation of a uniaxial ferroelectric (LiNbO₃) does change when its polarity is switched, and use this mechanical asymmetry both to quantify its flexoelectricity and to mechanically read the sign of its ferroelectric domains.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetically-actuated mesoporous nanowires for enhanced heterogeneous catalysis

  • Serrà, Albert|||0000-0003-0147-3400
  • Grau Abarca, Sergi|||0000-0002-7035-4870
  • Gimbert-Suriñach, Carolina|||0000-0002-4412-7607
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Josep|||0000-0003-4616-1371
  • Vallés, Elisa
We study the optimization of the catalytic properties of entirely magnetic Co-Pt compact and mesoporous nanowires of different diameters (25-200 nm) by using magnetic actuation. The nanowires are a single-entity, robust, magnetic-catalyst with a huge catalytically-active surface area. We show that apart from conventional parameters, like the size and morphology of the nanowires, other factors can be optimized to enhance their catalytic activity. In particular, given the magnetic character of the nanowires, rotating magnetic fields are a very powerful approach to boost the performance of the catalyst. In particular, the magnetic field induces them to act as nano-stirrers, improving the local flow of material towards the active sites of the catalyst. We demonstrate the versatility of the procedure by optimizing (i) the degradation of different types of pollutants (4-nitrophenol and methylene blue) and (ii) hydrogen production. For example, by using as little as 0.1 mg mL⁻¹ of 25 nm wide Co-Pt mesoporous nanowires (with ∼3 nm pore size) as catalysts, kinetic normalized constants knor as high as 20,667 and 21,750 s⁻¹ g⁻¹ for 4-nitrophenol and methylene blue reduction, respectively, are obtained. In addition, activity values for hydrogen production from borohydride are as high as 25.0 L H₂ g⁻¹ min⁻¹, even at room temperature. These values outperform any current state-of-the-art proposed catalysis strategies for water remediation reactions by at least 10-times and are superior to most advanced approaches to generate hydrogen from borohydride. The recyclability of the nanowires together with the simplicity of the synthetic method makes this approach (using not only Co-Pt, but also other mesoporous magnetic catalysts) very appealing for very diverse types of catalytic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Micelle-assisted electrodeposition of mesoporous Fe-Pt smooth thin films onto various substrates and their electrocatalytic activity towards hydrogen evolution reaction

  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Baró, M. D.|||0000-0002-8636-1063
  • Alcantara, Carlos
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Mesoporous Fe-Pt thin films are obtained by micelle-assisted electrodeposition onto metallic substrates with dissimilar activity (namely, gold, copper, and aluminum seed layers evaporated on Si/Ti) under constant applied potential (E=-1.1 V vs. Ag/AgCl) and deposition time (600 s). The amphiphilic triblock copolymer Pluronic P-123 is used as a soft template to guide the formation of mesopores. The occurrence of pores (ca. 7 nm in diameter) with narrow size distribution, distributed evenly over the surface, is observed in all cases. Despite the applied conditions being the same, the roughness and the amount of Fe incorporated in the films are influenced by the nature of the substrate. In particular, ultra-smooth films containing a larger amount of Fe (21 wt %) are obtained when deposition takes place on the Au surface. X-ray diffraction analyses reveal that Pt and Fe are alloyed to a certain extent, although some iron oxides/hydroxides also unavoidably form. The resulting films have been tested as electrocatalysts in the hydrogen evolution reaction (HER) in alkaline media. The mesoporous Fe-rich Fe-Pt films on Au show excellent HER activity and cyclability.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Parametric aqueous electrodeposition study and characterization of Fe-Cu films

  • Dislaki, Evangelia|||0000-0002-3360-1588
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
In this study, FexCu1-x films over a wide composition range (0≤x≤86) were prepared from an aqueous sulfate electrolytic solution using three different complexing agents and variable plating conditions. The effect of parameters such as bath composition, current density and temperature on the elemental composition, morphology, structure and magnetic properties of the deposits was investigated. The electrochemical behavior was studied using cyclic voltammetry. High quality, smooth deposits with good substrate adhesion and minimized oxygen content were achieved. X-ray patterns indicate phase separation, though results from Rietveld analysis strongly suggest partial alloying. Magnetization dependence on Fe content is clearly demonstrated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A CaCO₃/nanocellulose-based bioinspired nacre-like material

  • Farhadi-Khouzani, Masoud
  • Schütz, Christina
  • Durak, Grażyna M.
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Sort, Jordi|||0000-0003-1213-3639
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Bergström, Lennart
  • Gebauer, Denis
Nacre continues to be an inspiration for the fabrication of strong and tough materials from renewable and earth-abundant raw materials. Herein, we showed how a nacre-like hybrid material based on nanocellulose (NC) and CaCO₃ can be prepared via the sequential infiltration of polymer-stabilised CaCO₃ liquid precursors into layers of pre-deposited NC films. Layer-by-layer assembly of the NC films followed by controlled spreading and infiltration with liquid CaCO₃ precursors generated a lamellar material with an architecture and iridescent appearance similar to those of nacre. The wettability of the NC films towards the liquid CaCO₃ precursors was controlled by hydroxyl and carboxyl functionalization of the NC fibrils and the addition of magnesium ions. The combination of a high stiffness and plasticity of the nacre-like NC/CaCO₃ hybrid materials show that excellent mechanical properties can be obtained employing a fibrillar organic constituent that is relatively hard. The fabrication of a nacre-like hybrid material via an aqueous route of assembly and infiltration processing demonstrates how a sustainable composite material with outstanding properties can be produced using the most abundant biopolymer and biomineral on earth.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A facile co-precipitation synthesis of heterostructured ZrO₂/ZnO nanoparticles as efficient photocatalysts for wastewater treatment

  • Quintana, Alberto|||0000-0002-9813-735X
  • Altube, Ainhoa
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
  • Guerrero, Miguel|||0000-0001-8350-8261
ZrO₂-decorated ZnO (ZrO₂/ZnO) nanoparticles (NPs) have been synthesized by a facile co-precipitation method in the presence of cetyltrimethylammonium bromide (CTAB) surfactant. The ZrO₂ amount in the NPs has been varied from 1.0, 2.0, 4.9, to 9.3% by weight. The resulting NPs are heterostructured and consist of a crystalline ZnO core (wurtzite phase) surrounded by an amorphous ZrO₂ layer. X-ray diffraction analyses support this observation. The NPs show a narrow size distribution and are slightly elongated. Compared to pure ZnO NPs, the hybrid ZrO₂/ZnO ones show enhanced photocatalytic activity toward the degradation of Rhodamine B under UV-Vis light. Such enhancement has been partly attributed to the increased amount of oxygen vacancies when ZrO₂ is incorporated into the NPs, as shown by X-ray photoelectron spectroscopy analyses.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanical properties, corrosion performance and cell viability studies on newly developed porous Fe-Mn-Si-Pd alloys

  • Feng, Yuping
  • Gaztelumendi, Nerea|||0000-0002-3837-2956
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Zhang, Huiyan
  • Solsona, Pau|||0000-0001-9274-2447
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Barrios, Leonardo|||0000-0002-6151-8503
  • Pellicer, Eva|||0000-0002-8901-0998
  • Nogués, Carme|||0000-0002-6361-8559
  • Sort, Jordi|||0000-0003-1213-3639
Porous Fe-30Mn6Si1Pd (wt.%) alloys were prepared by a simple press and sinter process from ball-milled Fe, Mn, Si and Pd powders blended with 10 wt%, 20 wt% and 40 wt% NaCl to obtain different degrees of porosity. For comparison purposes, a bulk fully-compact Fe-30Mn6Si1Pd alloy was produced by arc-melting and subsequent copper-mold suction-casting. While the porous Fe-30Mn6Si1Pd alloys only consist of γ-austenite, their fully-compact counterpart comprises ε-martensite and γ-austenite phases. In all cases, the low magnetic susceptibility response assures good compatibility with nuclear magnetic resonance and magnetic resonance imaging techniques. Furthermore, a reduction of the Young's modulus, from 55 to 7 GPa, was attained by introducing porosity. The biodegradation performance was evaluated by static immersion and electrochemical corrosion tests in Hank's solution. The influence of immersion time on composition, microstructure, mechanical and magnetic properties was assessed. While introducing porosity renders alloys with suitable mechanical and magnetic properties, it also has a detrimental effect in terms of cell viability. Hence, the porosity level needs to be controlled in order to obtain alloys with an optimized performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cytocompatibility assessment of Ti-Zr-Pd-Si-(Nb) alloys with low Young's modulus, increased hardness and enhanced osteoblast differentiation for biomedical applications

  • Blanquer, Andreu|||0000-0002-3551-1885
  • Musilkova, J.
  • Barrios, Leonardo|||0000-0002-6151-8503
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Vandrovcova, M.
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
  • Bacakova, L.
  • Nogués, Carme|||0000-0002-6361-8559
Ti-based alloys have increased importance for biomedical applications due to their excellent properties. In particular, the two recently developed TiZrPdSi(Nb) alloys, with a predominant β-Ti phase microstructure, have good mechanical properties, such as a relatively low Young's modulus and high hardness. In the present work, the cytocompatibility of these alloys was assessed using human osteoblast-like Saos-2 cells. Cells grown on the alloys showed larger spreading areas (more than twice) and higher vinculin content (nearly 40% increment) when compared with cells grown on glass control surfaces, indicating a better cell adhesion. Moreover, cell proliferation was 18% higher for cells growing on both alloys than for cells growing on glass and polystyrene control surfaces. Osteogenic differentiation was evaluated by quantifying the expression of four osteogenic genes (osteonectin, osteocalcin, osteopontin, and bone sialoprotein), the presence of three osteogenic proteins (alkaline phosphatase, collagen I, and osteocalcin) and the activity of alkaline phosphatase at different time-points. The results demonstrated that TiZrPdSi and TiZrPdSiNb alloys enhance osteoblast differentiation, and that cells grown on TiZrPdSiNb alloy present higher levels of some late osteogenic markers during the first week in culture. These results suggest that the TiZrPdSi(Nb) alloys can be considered as excellent candidates for orthopaedical uses.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Evaporation-induced self-assembly synthesis of Ni-doped mesoporous SnO₂ thin films with tunable room temperature magnetic properties

  • Fan, Junpeng|||0000-0003-2243-5251
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Carretero-Genevrier, Adrian|||0000-0003-0488-9452
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Mesoporous Ni-doped SnO₂ thin films synthesized from variable [Ni(II)/Sn(IV)] molar ratios (0 : 100, 5 : 95, 10 : 90, 15 : 85 and 20 : 80), thicknesses in the range of 100-150 nm, and average pore sizes lower than 10 nm were obtained through a sol-gel based self-assembly process using Pluronic P-123 as a structure-directing agent. Grazing incidence X-ray diffraction experiments indicate that the films mostly possess a tetragonal SnO₂ structure with Ni²+ in substitutional positions, although energy-dispersive X-ray analyses also reveal the occurrence of small NiO clusters in the films produced from high [Ni(II)/Sn(IV)] molar ratios (corresponding to a Ni amount of 8.6 at%). X-ray photoelectron spectroscopy experiments indicate the lack of metallic Ni and the occurrence of oxygen vacancies in the mesoporous films. Interestingly, the magnetic properties of these mesoporous films significantly vary as a function of the doping percentage. The undoped SnO₂ films exhibit a diamagnetic behavior, whereas a clear paramagnetic signal dominates the magnetic response of the Ni-doped mesoporous films, probably due to the presence of NiO as a secondary phase. A small ferromagnetic-like contribution superimposed to the paramagnetic background is observed for samples with high Ni contents, possibly stemming from the combined effect from Ni incorporation and the occurrence of oxygen vacancies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltage-induced coercivity reduction in nanoporous alloy films, a boost towards energy-efficient magnetic actuation

  • Quintana, Alberto|||0000-0002-9813-735X
  • Zhang, Jin
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Menéndez, Enric|||0000-0003-3809-2863
  • Quadrado del Burgo, Ramón|||0000-0002-8344-2319
  • Robles, Roberto|||0000-0001-7808-0395
  • Baró, M. D.|||0000-0002-8636-1063
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Muller Jevenois, Carlos
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Magnetic data storage and magnetically actuated devices are conventionally controlled by magnetic fields generated using electric currents. This involves significant power dissipation by Joule heating effect. To optimize energy efficiency, manipulation of magnetic information with lower magnetic fields (i.e., lower electric currents) is desirable. This can be accomplished by reducing the coercivity of the actuated material. Here, a drastic reduction of coercivity is observed at room temperature in thick (≈600 nm), nanoporous, electrodeposited Cu-Ni films by simply subjecting them to the action of an electric field. The effect is due to voltage-induced changes in the magnetic anisotropy. The large surface-area-to-volume ratio and the ultranarrow pore walls of the system allow the whole film, and not only the topmost surface, to effectively contribute to the observed magnetoelectric effect. This waives the stringent "ultrathin-film requirement" from previous studies, where small voltage-driven coercivity variations were reported. This observation expands the already wide range of applications of nanoporous materials (hitherto in areas like energy storage or catalysis) and it opens new paradigms in the fields of spintronics, computation, and magnetic actuation in general.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Self-templating faceted and spongy single-crystal ZnO nanorods, resistive switching and enhanced piezoresponse

  • Quintana, Alberto|||0000-0002-9813-735X
  • Gómez, Andrés|||0000-0003-2847-0138
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A template-free, cost-effective, hydrothermal procedure is used to synthesize large areas of either faceted or spongy self-standing single-crystalline ZnO nanorods (NRs) from electrodeposited Zn films. The morphology of the NRs (faceted versus spongy) can be easily adjusted by simply varying the electrodeposition parameters of the parent Zn film. The obtained NRs exhibit an enhanced piezoelectric response (compared to bulk ZnO) and resistive switching properties which depend on their intrinsic morphology. This combination of properties together with the simplicity of the synthetic approach is particularly appealing for the fabrication of large arrays of nanosensors, nanoactuators and other applications that could benefit from an enhanced surface area in single-crystalline semiconductors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unraveling the origin of magnetism in mesoporous Cu-doped SnO₂ magnetic semiconductor

  • Fan, Junpeng|||0000-0003-2243-5251
  • Menéndez, Enric|||0000-0003-3809-2863
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Quintana, Alberto|||0000-0002-9813-735X
  • Weschke, Eugen
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The origin of magnetism in wide-gap semiconductors doped with non-ferromagnetic 3d transition metals still remains intriguing. In this article, insights in the magnetic properties of ordered mesoporous Cu-doped SnO₂ powders, prepared by hard-templating, have been unraveled. Whereas, both oxygen vacancies and Fe-based impurity phases could be a plausible explanation for the observed room temperature ferromagnetism, the low temperature magnetism is mainly and unambiguously arising from the nanoscale nature of the formed antiferromagnetic CuO, which results in a net magnetization that is reminiscent of ferromagnetic behavior. This is ascribed to uncompensated spins and shape-mediated spin canting effects. The reduced blocking temperature, which resides between 30 and 5 K, and traces of vertical shifts in the hysteresis loops confirm size effects in CuO. The mesoporous nature of the system with a large surface-to-volume ratio likely promotes the occurrence of uncompensated spins, spin canting, and spin frustration, offering new prospects in the use of magnetic semiconductors for energy-efficient spintronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Micelle-assisted electrodeposition of highly mesoporous Fe-Pt nodular films with soft magnetic and electrocatalytic properties

  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Baró, M. D.|||0000-0002-8636-1063
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Mesoporous Fe-Pt nodular films (with a regular spatial arrangement of sub-15 nm pores) are grown onto evaporated Au, Cu and Al conductive layers by micelle-assisted electrodeposition from metal chloride salts in the presence of Pluronic P123 tri-block copolymer dissolved in the aqueous electrolytic bath. This synthetic approach constitutes a simple, one-step, versatile procedure to grow multifunctional mesoporous layers appealing for diverse applications that take advantage of materials with an ultra-high surface area-to-volume ratio. The films exhibit tuneable composition with relative Fe/Pt weight ratios, disregarding oxygen, varying from 4/96 to 52/48. All the mesoporous alloys show a soft magnetic behaviour with tuneable saturation magnetization and coercivity values (the latter ranging from ca. 5 Oe to 40 Oe). In addition, the Au/Fe-Pt deposits (even the ones with higher Fe content) exhibit good performance towards hydrogen evolution reaction in both alkaline and acidic media due to the inherent mesoporosity, with excellent stability after running 50 cycles. The interest of alloying Fe with Pt is thus two-fold: (i) to confer magnetic properties to the mesoporous alloys and (ii) to reduce the amount of the costly noble metal in the electrocatalyst in an environmentally sustainable manner.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanical behaviour of brushite and hydroxyapatite coatings electrodeposited on newly developed FeMnSiPd alloys

  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Feng, Yuping
  • Pellicer, Eva|||0000-0002-8901-0998
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Sort, Jordi|||0000-0003-1213-3639
Calcium phosphate coatings (CaP) (i.e., brushite and hydroxyapatite) were grown by pulsed current electrodeposition on FeMnSiPd alloys, a newly developed material proposed for biomedical implants. The electrolytic baths contained Ca(NO₃)₂·4H₂O and NH₄H₂PO₄ as precursors. Bath additives, such as H₂O₂ and NaOH, were used to promote hydroxyapatite (HAp) coating formation directly from the bath. The effect of the electrodeposition parameters on the structure, morphology and mechanical performance of the coatings was investigated. Increasing the electrodeposition time from 900s to 3600s resulted in an increase of HAp over the dominant brushite structure. Addition of 2000 ppm of NaOH or 3000 ppm of H₂O₂ also promoted an increase of HAp fraction when compared to the coatings obtained from the additive-free bath. Nonetheless, pure HAp was only achieved with the addition of 4000 ppm of NaOH to the electrolyte. The morphologies of the CaP particles in the coatings ranged from needle- to plate-like structures depending on the electrodeposition parameters and the resulting phases. The mechanical behaviour of the coatings was studied by scratch testing and nanoindentation. As a general trend, the Young's modulus and hardness values of the electrodeposited coatings were lower than those reported for fully-dense HAp, independently of the deposition conditions, because of the porous morphology of the coatings. No signs of cracking or delamination were observed during nanoindentation or scratch tests except for the coating prepared form the electrolyte containing 3000 ppm of H₂O₂.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Comparative electrochemical oxidation of methyl orange azo dye using Ti/Ir-Pb, Ti/Ir-Sn, Ti/Ru-Pb, Ti/Pt-Pd and Ti/RuO2 anodes

  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Baró, M. D.|||0000-0002-8636-1063
  • Rossinyol Casals, Emma|||0000-0002-1656-1254
  • Morales-Ortiz, Ulises
  • Sort, Jordi|||0000-0003-1213-3639
  • Brillas, Enric
  • Pellicer, Eva|||0000-0002-8901-0998
The relative oxidation power of dimensionally stable anodes, namely Ti/Ir-Pb, Ti/Ir-Sn, Ti/Ru-Pb, Ti/Pt-Pd and Ti/RuO₂, has been determined from the anodic oxidation (AO) treatment of 2 dm³ of methyl orange azo dye solutions in 0.050 mol dm¯³ Na₂SO₄ of pH 7.0 at constant current density. The anodes were synthesized by the dip-coating method using the corresponding metallic chlorides in isopropanol/water and their morphology, surface roughness, crystallographic structure and composition were analyzed. A mixture of IrO₂, Pb₂O₃ and Pb₃O₄ were the components in the outperforming Ti/Ir-Pb anode. The effect of current density, Na₂SO₄ concentration, and cathode nature on the decolorization of azo dye solutions by AO with Ti/RuO₂ was examined. Under favorable conditions, 96%-98% color removal was achieved using Ti/Ir-Pb, Ti/Ir-Sn and Ti/Ru-Pb, with lower decolorization for Ti/Pt-Pd and Ti/RuO₂ anodes. In all cases, a pseudo-first-order decolorization process was found. The oxidation ability of anodes rose in the order Ti/RuO₂< Ti/Pt-Pd < Ti/Ru-Pb < Ti/Ir-Sn < Ti/Ir-Pb, achieving 76.0% mineralization for the latter electrode. The mixture of active and non-active materials then gave rise to anodes with higher oxidation power than those made solely of active materials, due to the enhancement of the oxidation action of hydroxyl radicals formed in the non-active oxide. The superiority of Ir over Ru in the mixed metal oxides was related to the greater adsorption of organics on its surface, thereby favoring their oxidation. Ammonium and sulfate ions were released as pre-eminent ions. Stable byproducts and final short-linear aliphatic carboxylic acids were identified by gas chromatography-mass spectrometry and ion-exclusion high-performance liquid chromatography. Based on these compounds, a reaction sequence for methyl orange mineralization is proposed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ferromagnetic-like behaviour in bismuth ferrite films prepared by electrodeposition and subsequent heat treatment

  • Bilican, Doğa|||0000-0002-9497-5065
  • Menéndez, Enric|||0000-0003-3809-2863
  • Solsona, Pau|||0000-0001-9274-2447
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Bismuth ferrite (BiFeO₃) films (10 μm in thickness) are synthesized by electrodeposition from a dimethylformamide bath containing Bi and Fe nitrate salts as precursors followed by heat treatment in air. Thermal treatments are needed to induce crystallisation of the as-deposited amorphous-like films. A detailed morphological, structural and magnetic characterisation evidences that BiFeO3 forms in a rather narrow temperature window (around 600 °C). At lower and higher temperatures, secondary binary and ternary oxides are also formed. Soft ferromagnetic-like behaviour is observed in all films, which presumably arises from the obtained nanoscale structure, which favours the occurrence of spin canting in the BiFeO₃ antiferromagnetic phase. The eventual contribution from secondary phases to the observed ferromagnetic-like response is also discussed. The obtained results are appealing for the integration of BiFeO₃ into devices that may require relatively thick films with an enhanced surface area-to-volume ratio. The growth of this type of material by techniques other than electrodeposition is not straightforward.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunable magnetism in nanoporous CuNi alloys by reversible voltage-driven element-selective redox processes

  • Quintana, Alberto|||0000-0002-9813-735X
  • Menéndez, Enric|||0000-0003-3809-2863
  • Isarain-Chávez, Eloy|||0000-0002-4154-1343
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Solsona, Pau|||0000-0001-9274-2447
  • Baró, M. D.|||0000-0002-8636-1063
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Voltage-driven manipulation of magnetism in electrodeposited 200 nm thick nanoporous single-phase solid solution Cu20 Ni80 (at%) alloy films (with sub 10 nm pore size) is accomplished by controlled reduction-oxidation (i.e., redox) processes in a protic solvent, namely 1 m NaOH aqueous solution. Owing to the selectivity of the electrochemical processes, the oxidation of the CuNi film mainly occurs on the Cu counterpart of the solid solution, resulting in a Ni-enriched alloy. As a consequence, the magnetic moment at saturation significantly increases (up to 33% enhancement with respect to the as-prepared sample), while only slight changes in coercivity are observed. Conversely, the reduction process brings Cu back to its metallic state and, remarkably, it becomes alloyed to Ni again. The reported phenomenon is fully reversible, thus allowing for the precise adjustment of the magnetic properties of this system through the sign and amplitude of the applied voltage.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Thermal treatment effect on the mechanical, tribological and corrosion properties of Ni-W alloy obtained by direct and pulse plating electrodeposition

  • Imaz, Naroa
  • Díez, J. A.
  • Grande, H.
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Ni-W electrodeposits have emerged as one of the most suitable alternatives to hard chromium mainly owing to their remarkable mechanical and tribological properties. Additionally, advanced technologies that require materials resistant to high temperatures could benefit from the use of Ni-W coatings. In this work, the effect of thermal treatment at different temperatures (300, 500, 700°C) on the characteristics of Ni-W coatings obtained by direct and pulse plating (PP) was studied. The morphology, composition, crystalline structure, hardness, wear rate, friction coefficient and corrosion resistance of the thermally treated coatings were analysed and compared with the performance of hard chromium coatings. The results indicate that the pulse-plated Ni-W coatings show better mechanical and tribological properties than the ones obtained by direct current. A significant improvement in hardness in Ni-W layers was achieved by thermal treatment, mainly in the films grown by PP, with minor changes in wear resistance and corrosion performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Lateral Magnetically Modulated Multilayers by Combining Ion Implantation and Lithography

  • Menéndez, Enric|||0000-0003-3809-2863
  • Modarresi, Hiwa
  • Petermann, Claire
  • Nogués, Josep|||0000-0003-4616-1371
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Liu, Haoliang
  • Kirby, Brian
  • Mohd, Amir Syed
  • Salhi, Zahir
  • Babcock, Earl
  • Mattauch, Stephan
  • Van Haesendonck, Chris
  • Vantomme, André|||0000-0001-9158-6534
  • Temst, Kristiaan
The combination of lithography and ion implantation is demonstrated to be a suitable method to prepare lateral multilayers. A laterally, compositionally, and magnetically modulated microscale pattern consisting of alternating Co (1.6 µm wide) and Co-CoO (2.4 µm wide) lines has been obtained by oxygen ion implantation into a lithographically masked Au-sandwiched Co thin film. Magnetoresistance along the lines (i.e., current and applied magnetic field are parallel to the lines) reveals an effective positive giant magnetoresistance (GMR) behavior at room temperature. Conversely, anisotropic magnetoresistance and GMR contributions are distinguished at low temperature (i.e., 10 K) since the O-implanted areas become exchange coupled. This planar GMR is principally ascribed to the spatial modulation of coercivity in a spring-magnet-type configuration, which results in 180° Néel extrinsic domain walls at the Co/Co-CoO interfaces. The versatility, in terms of pattern size, morphology, and composition adjustment, of this method offers a unique route to fabricate planar systems for, among others, spintronic research and applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multiwavelength light-responsive Au/B-TiO2 Janus micromotors

  • Jang, Bumjin
  • Hong, Ayoung
  • KangHa, Eun Kang
  • Alcantara, Carlos
  • Charreyron, Samuel
  • Mushtaq, Fajer
  • Pellicer, Eva|||0000-0002-8901-0998
  • Büchel, Robert
  • Sort, Jordi|||0000-0003-1213-3639
  • Lee, Sung Sik
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Conventional photocatalytic micromotors are limited to the use of specific wavelengths of light due to their narrow light absorption spectrum, which limits their effectiveness for applications in biomedicine and environmental remediation. We present a multiwavelength light-responsive Janus micromotor consisting of a black TiO₂ microsphere asymmetrically coated with a thin Au layer. The black TiO₂ microspheres exhibit absorption ranges between 300 and 800 nm. The Janus micromotors are propelled by light, both in H₂O₂ solutions and in pure H₂O over a broad range of wavelengths including UV, blue, cyan, green, and red light. An analysis of the particles' motion shows that the motor speed decreases with increasing wavelength, which has not been previously realized. A significant increase in motor speed is observed when exploiting the entire visible light spectrum (.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

New binuclear copper(ii) coordination polymer based on mixed pyrazolic and oxalate ligands, Structural characterization and mechanical properties

  • López Marzo, Adaris María|||0000-0001-8552-8637
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Calvet, Teresa|||0000-0002-4058-7171
  • Font-Bardia, Mercè|||0000-0002-7892-8744
  • Pellicer, Eva|||0000-0002-8901-0998
  • Baró, M. D.|||0000-0002-8636-1063
  • Pons Picart, Josefina|||0000-0003-1834-9326
  • Sort, Jordi|||0000-0003-1213-3639
A new inorganic-organic coordination polymer based on a copper(ii) binuclear complex coordinated with pyrazole (L1), 1-(hydroxymethyl)pyrazole) (L2) and oxalate (Ox) ligands has been unexpectedly obtained. The crystal structure of this coordination polymer has been unequivocally determined from single crystal X-ray diffraction. One copper(ii) center (Cu1) is four-coordinated with two nitrogens (N2, L1 and N3, L2), one oxygen (O1, L1) and one chlorine atom, while the other copper(ii) nucleus (Cu2) is five-coordinated with one nitrogen (N1, L1), three oxygens (O1, L2; O2 and O3, Ox) and one chlorine atom, giving slightly distorted square-planar and square-pyramidal geometries, respectively. To the best of our knowledge, such coordination environments have never been previously observed to coexist in the same structure. The terminal chlorine (Cl1) forms the connecting bridge between the planar binuclear [CuCl(Ox)(L1)(L2)] units ending in an attractive structural framework. An extended layered structure staggered along the b-axis is observed in the supramolecular view. Nanoindentation experiments were carried out and relevant mechanical parameters such as hardness, Young's modulus, indentation energies and elastic recovery were determined. Additionally, a comparative analysis between the supramolecular structure and the mechanical properties is reported.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced magnetic properties in antiferromagnetic-core/ferrimagnetic-shell nanoparticles

  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Nogués, Josep|||0000-0003-4616-1371
Bi-magnetic core/shell nanoparticles are gaining increasing interest due to their foreseen applications. Inverse antiferromagnetic(AFM)/ferrimagnetic(FiM) core/shell nanoparticles are particularly appealing since they may overcome some of the limitations of conventional FiM/AFM systems. However, virtually no simulations exist on this type of morphology. Here we present systematic Metropolis Monte Carlo simulations of the exchange bias properties of such nanoparticles. The coercivity, H C, and loop shift, H ex, present a non-monotonic dependence with the core diameter and the shell thickness, in excellent agreement with the available experimental data. Additionally, we demonstrate novel unconventional behavior in FiM/AFM particles. Namely, while H C and H ex decrease upon increasing FiM thickness for small AFM cores (as expected), they show the opposite trend for large cores. This presents a counterintuitive FiM size dependence for large AFM cores that is attributed to the competition between core and shell contributions, which expands over a wider range of core diameters leading to non-vanishing H ex even for very large cores. Moreover, the results also hint different possible ways to enhance the experimental performance of inverse core/shell nanoparticles for diverse applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A new reversal mode in exchange coupled antiferromagnetic/ferromagnetic disks, Distorted viscous vortex

  • Gilbert, Dustin A.
  • Ye, Li
  • Varea Espelt, Aïda
  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Buchanan, K. S.
  • Hoffmann, Axel
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Sort, Jordi|||0000-0003-1213-3639
  • Liu, Kai|||0000-0001-9413-6782
  • Nogués, Josep|||0000-0003-4616-1371
Magnetic vortices have generated intense interest in recent years due to their unique reversal mechanisms, fascinating topological properties, and exciting potential applications. In addition, the exchange coupling of magnetic vortices to antiferromagnets has also been shown to lead to a range of novel phenomena and functionalities. Here we report a new magnetization reversal mode of magnetic vortices in exchange coupled Ir<inf.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Direct evidence for an interdiffused intermediate layer in bi-magnetic core-shell nanoparticles

  • Juhin, Amélie|||0000-0003-0752-3034
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Sikora, Marcin
  • Carvallo, Claire
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Baró, M. D.|||0000-0002-8636-1063
  • Sainctavit, Philippe
  • Glatzel, Pieter
  • Nogués, Josep|||0000-0003-4616-1371
Core-shell nanoparticles attract continuously growing interest due to their numerous applications, which are driven by the possibility of tuning their functionalities by adjusting structural and morphological parameters. However, despite the critical role interdiffused interfaces may have in the properties, these are usually only estimated in indirect ways. Here we directly evidence the existence of a 1.1 nm thick (Fe,Mn)O interdiffused intermediate shell in nominally γ-FeO-MnO core-shell nanoparticles using resonant inelastic X-ray scattering spectroscopy combined with magnetic circular dichroism (RIXS-MCD). This recently developed magneto-spectroscopic probe exploits the unique advantages of hard X-rays (i.e., chemical selectivity, bulk sensitivity, and low self-absorption at the K pre-edge) and can be advantageously combined with transmission electron microscopy and electron energy loss spectroscopy to quantitatively elucidate the buried internal structure of complex objects. The detailed information on the structure of the nanoparticles allows understanding the influence of the interface quality on the magnetic properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

3D Visualization of the Iron Oxidation State in FeO/Fe3O4 Core-Shell Nanocubes from Electron Energy Loss Tomography

  • Torruella, Pau
  • Arenal, Raúl|||0000-0002-2071-9093
  • Peña, Francisco de la
  • Saghi, Zineb|||0000-0002-8895-8410
  • Yedra Cardona, Lluís|||0000-0003-1818-9836
  • Eljarrat Ascunce, Alberto
  • López Conesa, Lluís|||0000-0003-1456-079X
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Nogués, Josep|||0000-0003-4616-1371
  • Ducati, Caterina
  • Midgley, Paul A.
  • Peiro, Francesca|||0000-0002-5697-0554
  • Estrade, Sonia|||0000-0002-3340-877X
The physicochemical properties used in numerous advanced nanostructured devices are directly controlled by the oxidation states of their constituents. In this work we combine electron energy-loss spectroscopy, blind source separation, and computed tomography to reconstruct in three dimensions the distribution of Fe and Fe ions in a FeO/FeO core/shell cube-shaped nanoparticle with nanometric resolution. The results highlight the sharpness of the interface between both oxides and provide an average shell thickness, core volume, and average cube edge length measurements in agreement with the magnetic characterization of the sample.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Maximizing Exchange Bias in Co/CoO Core/Shell Nanoparticles by Lattice Matching between the Shell and the Embedding Matrix

  • Gonzalez, Juan Antonio|||0000-0002-2091-0381
  • Andrés González, Juan Pedro|||0000-0001-9348-0661
  • López Antón, Ricardo
  • De Toro, José A.|||0000-0002-9075-1697
  • Normile, Peter S.
  • Muñiz, Pablo
  • Riveiro, J. Manuel
  • Nogués, Josep|||0000-0003-4616-1371
The exchange bias properties of 5 nm Co/CoO ferromagnetic/antiferromagnetic core/shell nanoparticles, highly dispersed in a CuO matrix, have been optimized by matching the lattice parameter of the matrix with that of the CoO shell. Exchange bias and coercivity fields as large as H = 7780 Oe and H = 6950 Oe are linked to the presence of a CuO matrix (0.3% lattice mismatch with respect to the shells). The small mismatch between CuO and CoO plays a dual role: it (i) structurally stabilizes the CoO and (ii) favors the existence of a large amount of uncompensated moments in the shell that enhance the exchange bias effects. The results indicate that lattice matching may be a very efficient way to improve the exchange bias properties of core/shell nanoparticles, paving the way to novel approaches to tune their magnetic properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Seeded Growth Synthesis of Au-Fe3O4 Heterostructured Nanocrystals, Rational Design and Mechanistic Insights

  • Fantechi, Elvira|||0000-0002-9323-2198
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Torruella, Pau
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Coy, Emerson|||0000-0002-4149-9720
  • Jurga, Stefan
  • Bastús, Neus G.|||0000-0002-3144-7986
  • Nogués, Josep|||0000-0003-4616-1371
  • Puntes, Víctor|||0000-0001-8996-9499
Multifunctional hybrid nanoparticles comprising two or more entities with different functional properties are gaining ample significance in industry and research. Due to its combination of properties, a particularly appealing example is Au-FeO composite nanoparticles. Here we present an in-depth study of the synthesis of Au-FeO heterostructured nanocrystals (HNCs) by thermal decomposition of iron precursors in the presence of preformed 10 nm Au seeds. The role of diverse reaction parameters on the HNCs formation was investigated using two different precursors: iron pentacarbonyl (Fe(CO)) and iron acetylacetonate (Fe(acac)). The reaction conditions promoting the heterogeneous nucleation of FeO onto Au seeds were found to significantly differ depending on the precursor chosen, where Fe(acac) is considerably more sensitive to the variation of the parameters than Fe(CO) and more subject to homogeneous nucleation processes with the consequent formation of isolated iron oxide nanocrystals (NCs). The role of the surfactants was also crucial in the formation of well-defined and monodisperse HNCs by regulating the access to the Au surface. Similarly, the variations of the [Fe]/[Au] ratio, temperature, and employed solvent were found to act on the mean size and the morphology of the obtained products. Importantly, while the optical properties are rather sensitive to the final morphology, the magnetic ones are rather similar for the different types of obtained HNCs. The surface functionalization of dimer-like HNCs with silica allows their dispersion in aqueous media, opening the path to their use in biomedical applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced Ultrafast Nonlinear Optical Response in Ferrite Core/Shell Nanostructures with Excellent Optical Limiting Performance

  • Perumbilavil, Sreekanth
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Tiwari, Gaurav Kumar
  • Nogués, Josep|||0000-0003-4616-1371
  • Endo, Tamio
  • Philip, Reji
Nonlinear optical nanostructured materials are gaining increased interest as optical limiters for various applications, although many of them suffer from reduced efficiencies at high-light fluences due to photoinduced deterioration. The nonlinear optical properties of ferrite core/shell nanoparticles showing their robustness for ultrafast optical limiting applications are reported. At 100 fs ultrashort laser pulses the effective two-photon absorption (2PA) coefficient shows a nonmonotonic dependence on the shell thickness, with a maximum value obtained for thin shells. In view of the local electric field confinement, this indicates that core/shell is an advantageous morphology to improve the nonlinear optical parameters, exhibiting excellent optical limiting performance with effective 2PA coefficients in the range of 10 cm W (100 fs excitation), and optical limiting threshold fluences in the range of 1.7 J cm. These values are comparable to or better than most of the recently reported optical limiting materials. The quality of the open aperture Z-scan data recorded from repeat measurements at intensities as high as 35 TW cm, indicates their considerably high optical damage thresholds in a toluene dispersion, ensuring their robustness in practical applications. Thus, the high photostability combined with the remarkable nonlinear optical properties makes these nanoparticles excellent candidates for ultrafast optical limiting applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Remanence plots as a probe of spin disorder in magnetic nanoparticles

  • De Toro, José A.|||0000-0002-9075-1697
  • Vasilakaki, Marianna
  • Lee, Su Seong
  • Andersson, Mikael S.
  • Normile, Peter S.
  • Yaacoub, Nader
  • Murray, Peyton D.|||0000-0003-0389-0611
  • Sánchez, Elena H.|||0000-0001-5737-0035
  • Muñiz, Pablo
  • Peddis, Davide|||0000-0003-0810-8860
  • Mathieu, Roland|||0000-0002-5261-2047
  • Liu, Kai|||0000-0001-9413-6782
  • Geshev, Julian|||0000-0003-3730-3657
  • Trohidou, Kalliopi N.
  • Nogués, Josep|||0000-0003-4616-1371
Remanence magnetization plots (e.g., Henkel or δM plots) have been extensively used as a straightforward way to determine the presence and intensity of dipolar and exchange interactions in assemblies of magnetic nanoparticles or single domain grains. Their evaluation is particularly important in functional materials whose performance is strongly affected by the intensity of interparticle interactions, such as patterned recording media and nanostructured permanent magnets, as well as in applications such as hyperthermia and magnetic resonance imaging. Here, we demonstrate that δM plots may be misleading when the nanoparticles do not have a homogeneous internal magnetic configuration. Substantial dips in the M plots of γ-FeO nanoparticles isolated by thick SiO shells indicate the presence of demagnetizing interactions, usually identified as dipolar interactions. Our results, however, demonstrate that it is the inhomogeneous spin structure of the nanoparticles, as most clearly evidenced by Mössbauer measurements, that has a pronounced effect on the δM plots, leading to features remarkably similar to those produced by dipolar interactions. X-ray diffraction results combined with magnetic characterization indicate that this inhomogeneity is due to the presence of surface structural (and spin) disorder. Monte Carlo simulations unambiguously corroborate the critical role of the internal magnetic structure in the δM plots. Our findings constitute a cautionary tale on the widespread use of remanence plots to assess interparticle interactions as well as offer new perspectives in the use of Henkel and δM plots to quantify the rather elusive inhomogeneous magnetization states in nanoparticles.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Novel Ba-hexaferrite structural variations stabilized on the nanoscale as building blocks for epitaxial bi-magnetic hard/soft sandwiched maghemite/hexaferrite/maghemite nanoplatelets with out-of-plane easy axis and enhanced magnetization

  • Belec, B.
  • Dražić, G.
  • Gyergyek, Sašo|||0000-0002-7325-2984
  • Podmiljšak, B.
  • Goršak, T.
  • Komelj, M.
  • Nogués, Josep|||0000-0003-4616-1371
  • Makovec, Darko|||0000-0002-0190-6758
Atomic-resolution scanning-transmission electron microscopy showed that barium hexaferrite (BHF) nanoplatelets display a distinct structure, which represents a novel structural variation of hexaferrites stabilized on the nanoscale. The structure can be presented in terms of two alternating structural blocks stacked across the nanoplatelet: a hexagonal (BaFeO) R block and a cubic (FeO) spinel S block. The structure of the BHF nanoplatelets comprises only two, or rarely three, R blocks and always terminates at the basal surfaces with the full S blocks. The structure of a vast majority of the nanoplatelets can be described with a SR∗S∗RS stacking order, corresponding to a BaFeO composition. The nanoplatelets display a large, uniaxial magnetic anisotropy with the easy axis perpendicular to the platelet, which is a crucial property enabling different novel applications based on aligning the nanoplatelets with applied magnetic fields. However, the BHF nanoplatelets exhibit a modest saturation magnetization, M, of just over 30 emu g. Given the cubic S block termination of the platelets, layers of maghemite, γ-FeO, (M), with a cubic spinel structure, can be easily grown epitaxially on the surfaces of the platelets, forming a sandwiched M/BHF/M platelet structure. The exchange-coupled composite nanoplatelets exhibit a remarkably uniform structure, with an enhanced M of more than 50 emu g while essentially maintaining the out-of-plane easy axis. The enhanced M could pave the way for their use in diverse platelet-based magnetic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling a New High-Temperature Ordered Magnetic Phase in ϵ-Fe2O3

  • García-Muñoz, José Luis|||0000-0002-4174-2794
  • Romaguera, Arnau
  • Fauth, François|||0000-0001-9465-3106
  • Nogués, Josep|||0000-0003-4616-1371
  • Gich, Martí|||0000-0001-9958-0057
Iron oxides are among the most abundant materials on Earth, and yet there are some of their basic properties which are still not well-established. Here, we present temperature-dependent magnetic, X-ray, and neutron diffraction measurements refuting the current belief that the magnetic ordering temperature of ϵ-FeO is ∼500 K, i.e., well below that of other iron oxides such as hematite, magnetite, or maghemite. Upon heating from room temperature, the ϵ-FeO nanoparticles' saturation magnetization undergoes a monotonic decrease while the coercivity and remanence sharply drop, virtually vanishing around ∼500 K. However, above that temperature the hysteresis loops present a nonlinear response with finite coercivity, making evident signs of ferrimagnetic order up to temperatures as high as 850 K (T). The neutron diffraction study confirms the presence of ferrimagnetic order well above 500 K with Pna'2' magnetic symmetry, but only involving two of the four Fe sublattices which are ordered below T ≈ 480 K, and with a reduced net ferromagnetic component, that vanishes at above 850 K. The results unambiguously show the presence of a high-temperature magnetic phase in ϵ-FeO with a critical temperature of T ∼ 850 K. Importantly, this temperature is similar to the Curie point in other iron oxides, indicating comparable magnetic coupling strengths. The presence of diverse magnetic phases is further supported by the nonmonotonic evolution of the thermal expansion. The existence of a high-temperature ferrimagnetic phase in ϵ-FeO may open the door to further expand the working range of this multifunctional iron oxide.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effective ionic-liquid microemulsion based electrodeposition of mesoporous Co-Pt films for methanol oxidation catalysis in alkaline media

  • Serrà, Albert|||0000-0003-0147-3400
  • Gomez, Elvira|||0000-0002-9223-6357
  • Golosovsky, Igor V.|||0000-0002-2667-4711
  • Nogués, Josep|||0000-0003-4616-1371
  • Vallés, Elisa
Pt-based direct methanol fuel cells are attracting increasing interest as environmentally friendly alternative energy sources. However, the high price of Pt and the difficulty to prepare favourable morphologies for catalysis (e.g., mesoporous materials) are hampering their development into feasible products. Here, we demonstrate a novel approach to efficiently grow mesoporous films of Pt-poor alloys (CoPt and CoPt), based on electrodeposition in ionic liquid-in-water (IL/W) microemulsions. The high proportion of the electrolytic aqueous solution in the IL/W microemulsion favors a significant deposition rate, while the presence of IL drops induces the formation of highly mesoporous films. The mesoporous alloys, with pores in the 8-11 nm range, exhibit excellent durability in acidic and alkaline aggressive media, maintaining their peculiar morphology. The structures are very efficient for the catalysis of methanol electro-oxidation in alkaline media, with minimal poisoning of the catalysts. These results pave the way to develop simple, versatile environmentally friendly fuel cell catalysts to commercialize new viable ecological alternative energy sources.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Applications of exchange coupled bi-magnetic hard/soft and soft/hard magnetic core/shell nanoparticles

  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Nogués, Josep|||0000-0003-4616-1371
The applications of exchange coupled bi-magnetic hard/soft and soft/hard ferromagnetic core/shell nanoparticles are reviewed. After a brief description of the main synthesis approaches and the core/shell structural-morphological characterization, the basic static and dynamic magnetic properties are presented. Five different types of prospective applications, based on diverse patents and research articles, are described: permanent magnets, recording media, microwave absorption, biomedical applications and other applications. Both the advantages of the core/shell morphology and some of the remaining challenges are discussed.