Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solution-derived YBa2Cu3O7 nanocomposite films with a Ba2YTaO6 secondary phase for improved superconducting properties

  • Coll, Mariona
  • Ye, Shuai
  • Rouco, Víctor
  • Palau, Anna
  • Guzmán, Roger
  • Gázquez, Jaume
  • Arbiol, Jordi
  • Suo, Hongli
  • Puig Molina, Teresa
  • Obradors, Xavier
We report on the spontaneous segregation of double perovskite Ba 2YTaO6 (BYTO) nanoparticles within YBa2Cu 3O7 (YBCO) films forming a nanocomposite with two ternary oxides by the low cost and scalable chemical solution trifluoroacetate approach. Phase orientation, nanostructural and pinning studies are carried out by 2D x-ray diffraction, advanced scanning transmission electron microscopy and transport measurements, respectively. In this complex oxide nanocomposite system (YBCO-BYTO) the majority of the nanoparticles segregated within the (00l)-oriented superconducting matrix are randomly oriented. The presence of randomly oriented nanoparticles plays a key role in the generation of localized highly strained areas within the YBCO matrix which are suggested to strongly affect the superconducting properties. The incorporation of 6-10% of BYTO resulted in a maximum pinning force, at 77 K, three times higher than that obtained for a pristine sample, while Tc was maintained at 89-90 K. © 2013 IOP Publishing Ltd., The authors would like to acknowledge the financial support of MICINN (MAT2008-01022, MAT2011-28874-C02-01), Consolider NANOSELECT (CSD2007-00041) and Generalitat de Catalunya (2009 SGR 770, NanoAraCat and Xarmae). RG and MC acknowledges grants of MICINN, VR and JG acknowledges JAE CSIC grants. SY would like to thank the National Natural Science Foundation of China (51171002) and the program of New Century Excellent Talents in University of China. The authors thank Dr C Magen and LMA-INA for offering access to their instruments and expertise., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-xGdxO2-y nanowires derived from chemical solutions

  • Queralto, A.
  • de la Mata, M.
  • Martinez, L.
  • Magen, C.
  • Gibert, M.
  • Arbiol, J.
  • Huhne, R.
  • Obradors, X.
  • Puig, T.
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a highthroughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures'' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented Ce0.9Gd0.1O2-y (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO3 (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001) CGO[ 0-11]parallel to(011) LAO[100] growth orientation, with the enlargement occurring along the [0-11] CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min(-1)) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strain-driven broken twin boundary coherence in YBa2Cu3O7−δ nanocomposite thin films

  • Guzman, R.
  • Gazquez, J.
  • Rouco, V.
  • Palau, A.
  • Magén, C.
  • Varela, M.
  • Arbiol, J.
  • Obradors, X.
  • Puig, T.
In this letter we use high resolution scanning transmission electron microscopy to study epitaxial YBa2Cu3O7-d (YBCO) nanocomposite thin films. We find that twin boundaries (TB) in YBCO nanocomposite thin films are disturbed by the presence of secondary phase nanoparticles as well as by intergrowths. Secondary phases promote the nucleation of TBs and, at the same time, result in bending, decreasing and changing the TB's spacing. On the other hand, the local strain ensuing from the partial dislocation associated to Y248 and Y125 intergrowths break the vertical coherence of TBs. This interaction results in a complex domain structure where twin boundary coherence is no longer satisfied and twin spacing is reduced down to a few nanometers precluding vortex channeling at low temperatures.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Solution design for low-fluorine trifluoroacetate route to YBa2Cu3O7 films

  • Palmer, X.
  • Pop, Cornelia
  • Eloussifi, Hichem
  • Roura Grabulosa, Pere
  • Farjas Silva, Jordi
  • Calleja, Albert
  • Palau, Anna
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Ricart, Susagna
We present our work in the preparation of metallorganic precursor solutions with reduced fluorine content, able to fulfil the requirements for high-performance superconducting YBCO epitaxial layers as a promising approach to low cost and scalable coated conductors. Six different solutions using different quantities of fluorine and non-fluorine carboxylate precursors with a total amount of fluorine from 10 to 50% that of standard trifluoroacetic acid (TFA) solutions. For stabilization purposes different coordinating agents have been used and the solution rheology has been modified for proper substrate wettability. Thermal decomposition analysis and infrared spectroscopy performed directly in films, have revealed that the decomposition takes place in two consecutive stages around 265 and 310 °C respectively, and nuclear magnetic resonance (NMR) analysis could unveil the chemical reactions taking place in the solution. Using the solutions with 20% fluorine and upon optimization of the growth process parameters, YBCO layers with T c and J c(77 K) of 90 K and 4 MA cm−2 are obtained, The authors acknowledge the financial support from MICINN (Consolider NANOSELECT, CSD2007-00041, MAT 2011-28874-C02, MAT2014-51778-C2-2-R); Generalitat de Catalunya (Pla de Recerca 2014-SGR-753 and XaRMAE), and EU (FP7 NMP-LA-2012-280432 EUROTAPES project and MP1201 Cost action)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermoanalytical study of the decomposition of yttrium trifluoroacetate thin films

  • Eloussifi, Hichem
  • Farjas Silva, Jordi
  • Roura Grabulosa, Pere
  • Ricart, Susagna
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Dammak, Mohamed
We present the use of the thermal analysis techniques to study yttrium trifluoroacetate thin films decomposition.In situ analysis was done by means of thermogravimetry, differential thermal analysis, and evolved gas analysis.Solid residues at different stages and the final product have been characterized by X-ray diffraction and scanning electron microscopy.The thermal decomposition of yttrium trifluoroacetate thin films results in the formation of yttria and presents the same succession of intermediates than powder's decomposition, however, yttria and all intermediates but YF3 appear at significantly lower temperatures.We also observe a dependence on the water partial pressure that was not observed in the decomposition of yttrium trifluoroacetate powders.Finally, a dependence on the substrate chemical composition is discerned, This work was partially funded by the Spanish Programa Nacional de Materiales through projects MAT2011-28874-C02-01 and MAT2011-28874-C02-02, by the Consolider program Nanoselect, CSD2007-00041, EU project EUROTAPES NMP3-LA-2012-280432 and by the Generalitat de Catalunya contract nos. 2009SGR-185 and 2009SGR-770
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermal decomposition of barium trifluoroacetate thin films

  • Eloussifi, Hichem
  • Farjas Silva, Jordi
  • Roura Grabulosa, Pere
  • Ricart, Susagna
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Dammak, Mohamed
The thermal decomposition of barium trifluoroacetate thin films under different atmospheres is presented. Thermogravimetry and evolved gas analysis have been used for this in situ analysis. We focus our attention on the different behavior exhibited by films when compared to powders. The decomposition of barium trifluoroacetate is altered due to the faster out-diffusion of the product reaction:CF2. After barium trifluoroacetate decomposition a stable intermediate, barium fluoride, is formed. The decomposition of barium fluoride is diffusion controlled and depends on water partial pressure, This work was partially funded by the Spanish Programa Nacional de Materiales through projects MAT2011-28874-C02-01 and MAT2011-28874-C02-02, by the Consolider program Nanoselect, CSD2007-00041, EU project NESPA-RTN and by the Generalitat de Catalunya contracts No. 2009SGR-185 and 2009SGR-770
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Determination of thermal conductivity of powders in different atmospheres by differential scanning calorimetry

  • Sánchez Rodríguez, Daniel
  • López-Olmedo, Joan Pere
  • Farjas Silva, Jordi
  • Roura Grabulosa, Pere
We have developed a new method to measure the thermal conductivity of powders by differential scanning calorimetry (DSC) that works with masses in amounts as low as tens of mg. The method is based on that used by Camirand to determine the thermal conductivity of materials in the form of thin sheets but introducing a hemispherical pan to contain powders in such a way that the issue of heat transfer is reduced to a one-dimensional problem. The modification of the method was successfully validated on obtaining identical results in determining the thermal conductivity of a commercial silicone with both Camirand"s method and the modified method. We have also tested our method with materials that, in bulk, cover a wide range of thermal conductivities and have performed the experiments with several atmospheres and reference metals. The results are consistent with already published general trends in that they confirm that thermal conductivity of powders is mainly governed by thermal conduction through the surrounding gas, This work was partially funded by the Spanish Programa Nacional de Materiales through projects MAT2011-28874-C02-02 and by the Generalitat de Catalunya contract No. 2009SGR-185
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermal analysis of metal organic precursors for functional oxide preparation: thin films versus powders

  • Roura Grabulosa, Pere
  • Farjas Silva, Jordi
  • Eloussifi, Hichem
  • Carreras Blasco, Laura
  • Ricart, Susagna
  • Puig Molina, Teresa
  • Obradors, Xavier
The thermal decomposition of several metal organic precursors, used in the preparation of YBa2Cu3O7−x superconducting coated conductors (Cu acetate, Cu, Y and Ba trifluoroacetates and Ce propionate) is analyzed by means of several thermoanalytical techniques (TG/DTA, MS and DSC). In all cases, the metal organic precursors deposited as thin films decompose differently than powders from the same precursors. In thin films, decomposition is facilitated by the easier transport of reactive gas from the surrounding atmosphere and by the easier out-diffusion of volatile products. Consequently, films decompose at lower temperature and are more sensitive to the presence of any residual reactive gas in the furnace. Good thermal contact with the substrate is also shown to minimize overheating in films and avoid combustion processes that are otherwise often observed during the thermal decomposition of powders. Finally, the formation and stability of intermediate products towards the oxide formation, such as metal fluorides, differs in films because of the easier gas exchange. With respect to powders, these compounds are much less stable in films, where their decomposition temperature can be lowered by several hundreds of degrees Celsius. While in some cases the behaviour of films can be predicted by analyzing varying masses of precursor powders, this is not always the case. Therefore, thermal analysis carried out on films is recommended to avoid erroneous conclusions about materials preparation drawn from powders, We acknowledge the financial support from MICINN (MAT2011-28874-C02-01 and -02, Consolider Project NANOSELECT: CSD2007-00041), EU project EUROTAPES, (EUFP7 NMPLA2012280432) and by the Generalitat de Catalunya (Pla de Recerca 2009SGR-185, 2009-SGR-770 and XaRMAE). H. Eloussifi acknowledges financial support from the Tunisian Ministry of Higher Education and Scientific Research
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The effect of volatiles on the measurement of the reaction heat by differential scanning calorimetry

  • García Cano, Eduard
  • Sánchez Rodríguez, Daniel
  • López-Olmedo, Joan Pere
  • Farjas Silva, Jordi
  • Roura Grabulosa, Pere
When gases evolve during a chemical reaction, a fraction of the reaction heat is lost with them. We have analyzed, both theoretically and experimentally, the deviations that this effect can produce on the determination of the reaction heat by differential scanning calorimetry (DSC). It is shown that, even in the absence of gas overheating, deviations related to variations in the sample heat capacity can be substantial in experiments involving very intense DSC peaks. However, experiments performed on thermal decomposition of metal organic salts and on evaporation of liquids have shown that deviations usually arise from gas overheating, This work was partially funded by the Spanish Programa Nacional de Materiales through projects MAT2011-28874-C02-02 and by the Generalitat de Catalunya contract No. 2009SGR185
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Exact analytical solution for the Kissinger equation: Determination of the peak temperature and general properties of thermally activated transformations

  • Farjas Silva, Jordi
  • Roura Grabulosa, Pere
A key parameter of many transformations when heated at a constant rate is the peak temperature, i.e., the temperature at which the transformation rate is at its maximum. The most universal approach to determine the peak temperature for thermally activated transformations is the Kissinger equation. In this paper, we solve Kissinger equation to deduce the exact dependence of the peak temperature on the heating rate. This analytical solution is based on the Lambert W-function. In addition, an approximate solution is derived that is used to infer general properties of thermally activated processes and to obtain a test to check the validity of Kissinger method, This work was partially funded by the Spanish Programa Nacional de Materiales through project MAT2011-28874-C02-02 and by the Generalitat de Catalunya contract No. 2009SGR-185
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The thermal decomposition of barium trifluoroacetate

  • Farjas Silva, Jordi
  • Camps, Johan
  • Roura Grabulosa, Pere
  • Ricart, Susagna
  • Puig Molina, Teresa
  • Obradors, Xavier
A detailed analysis of the thermal decomposition of barium trifluoroacetate under different atmospheres is presented. Thermogravimetry, differential thermal analysis, and evolved gas analysis have been used for this in situ analysis. The presence of oxygen significantly advances the decomposition, while the presence of water vapor has a minor effect. The process is exothermic, the heat evolved being significantly larger in the presence of oxygen. The final product is BaF 2, which is stable up to 1200 °C. The underlying mechanism has been disclosed thanks to MS analysis of the volatiles formed during decomposition, This work was partially funded by the Spanish Programa National de Materiales through projects MAT2011-28874-C02-01 and MAT2011-28874-C02-02, by the Consolider program Nanoselect, CSD2007-00041, EU project NESPA-RTN and by the Generalitat de Catalunya contracts Nos. 2009SGR-185 and 2009SGR-770
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermal analysis for low temperature synthesis of oxide thin films from chemical solutions

  • Sánchez Rodríguez, Daniel
  • Farjas Silva, Jordi
  • Roura Grabulosa, Pere
  • Ricart, Susagna
  • Mestres, Narcís
  • Obradors, Xavier
  • Puig Molina, Teresa
The possibility of synthesizing functional oxide thin films at low temperature via combustion synthesis is analyzed both experimentally and numerically. To this aim, the decomposition of several oxide precursors [copper and cerium acetates, yttrium trifluoroacetate, and In2O3 and La0.7Sr0.3MnO3 (LSMO) nitrate based precursors] has been analyzed by thermal analysis techniques. It is shown that, although these precursors decompose via combustion when they are in the form of powders, their corresponding films show no evidence of combustion. The reason for this different behavior is clearly revealed with numerical simulations. Thin films will hardly experience combustion because the precursor front extinguishes before reaching the precursor-substrate interface leaving a "cool zone" hundreds of micrometers thick. In contrast, it is argued that thin oxide films can be obtained at temperatures lower than powders because of the enhanced gas transport mechanisms that usually limit the decomposition rate, This work was partially funded by the Spanish Programa Nacional de Materiales through Projects MAT2011-28874-C02-01 and MAT2011-28874-C02-02, by the Consolider program Nanoselect, CSD2007-00041, and by the Generalitat de Catalunya Contract Nos. 2009SGR-185 and 2009SGR-770
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermal gradients in thermal analysis experiments: Criterions to prevent inaccuracies when determining sample temperature and kinetic parameters

  • Sánchez Rodríguez, Daniel
  • Eloussifi, Hichem
  • Farjas Silva, Jordi
  • Roura Grabulosa, Pere
  • Dammak, Mohamed
Thermal analysis methods are customarily used to analyze the evolution of solid-state transformations when samples are submitted to a controlled temperature program. Thermal analysis results are generally interpreted under the assumption that no temperature gradients take place inside the sample, so that, under proper calibration the sample temperature can be determined and controlled. Two phenomena may contribute to the formation of temperature gradients within the sample: heat transport through the sample and heat evolved during an exothermic or endothermic transformation. We will provide two analytical relationships that relate the sample mass with the temperature gradient within the sample and that will provide a straightforward criterion for checking the reliability of the sample temperature. We will show that, because of their very low thermal conductivity, significant thermal gradients may occur in those samples in the form of powders. Besides, in the case of exothermic reactions and for typical experimental conditions, the heat released by the reaction significantly affects the determination of the sample temperature. Finally, we analyze how sample overheating affects the observed reaction kinetics, This work was partially funded by the Spanish Programa Nacional de Materiales through projects MAT2011-28874-C02-02 and by the Generalitat de Catalunya contract No. 2009SGR-185
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Composite films combining electrospun fiber network and epitaxial oxide by chemical solution deposition

  • Calleja, Ana
  • Sort, Jordi|||0000-0003-1213-3639
  • Ricart, Susana|||0000-0003-4196-2081
  • Granados García, Xavier
  • Palmer, Xavier
  • Vlad, Valentina Roxana
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
We report the preparation of a novel type of composites films by chemical solution deposition. It consists of an epitaxial oxide on a single crystal template inside which an oxide fiber network is dispersed. Electrospinning is used for the deposition of the fiber network whereas the continuous epitaxial phase is spin-coated. Good coating is observed between the liquid precursor of the continuous oxide and the fibers and remarkably, epitaxial (001) growth of the YBa2Cu3O7-x is not affected by the presence of the fiber network because both oxides do not react to each other. Topological continuity of the continuous phase is probed by electrical conductivity measurements, rendering nearly the same values reported for fiber-free films. Mechanical properties are determined by nanoindentation at low penetration depths to avoid the effect of the single crystal beneath the composite. Enhanced mechanical properties are found (hardness, Young's modulus, elastic recovery and wear resistance).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling the Nucleation and Coarsening Mechanisms of Solution-Derived Self-Assembled Epitaxial Ce0.9Gd0.1O2-y Nanostructures

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hühne, Ruben
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Self-Assembling approaches based on chemical solution deposition (CSD) are ideal methods for the cost-effective production of epitaxial nanostructures with high throughput. Therefore, an in-depth investigation of the nucleation and coarsening processes involved in the self-Assembly of nanostructures is mandatory to achieve a good control over nanostructure shape, dimensions, and orientation. Heteroepitaxial CeGdO (CGO) is an ideal model system to unveil the underlying nanostructure development mechanisms in addition to their promising properties for catalysis, gas sensors, and ionic conductivity. Rapid thermal annealing furnaces have been used to study separately the thermodynamic and kinetic nucleation and coarsening mechanisms of self-Assembled CGO isotropic and anisotropic nanostructures based on strain-engineering and surface energies control. Different CGO nanoislands are obtained: isotropic (001)CGO nanodots are grown on (001)-oriented YO:ZrO(YSZ) and LaAlO (Lao) substrates, whereas (011)Lao substrates promote the growth of elongated (011)CGO nanowires. HRTEM and RHEED analyses are used to study the early stages of nucleation, as well as the shape and interfacial structure of CGO nanostructures. A systematic study with the heating ramp, annealing temperature and time, and strain in combination with thermally activated theoretical models provides information on the nucleation behavior, nucleation barriers, and atomic diffusion coefficients along in-plane and out-of-plane island orientations. Highly anisotropic atomic diffusion constants have been shown to be at the origin of the high aspect ratios of some of the nanostructures. Overall, our study provides a general method for the evaluation of nucleation and coarsening of multiple CSD-derived oxide nanostructures and understanding the shape development by combining thermodynamic and kinetic approaches.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrafast Epitaxial Growth Kinetics in Functional Oxide Thin Films Grown by Pulsed Laser Annealing of Chemical Solutions

  • Queraltó López, Albert
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Tristany, Mar
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
The crystallization process and physical properties of different functional oxide thin films (CeZrO, LaNiO, BaSrTiO, and LaSrMnO) on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) are studied by pulsed laser annealing (PLA). A Nd:YAG laser source (λ = 266 nm, 10 Hz and τ ∼3 ns) is employed to crystallize chemical solution deposited (CSD) amorphous/nanocrystalline films under atmospheric conditions. We provide new insight on the influence of photochemical and photothermal interactions on the epitaxial crystallization kinetics of oxide thin films during the transformation from amorphous/polycrystalline material (i.e., atomic diffusion, epitaxial growth rates, and activation energies of nucleation and crystallization). The epitaxial growth is investigated by varying the laser fluence and the applied number of pulses. The morphology, structure, and epitaxial evolution of films are evaluated by means of atomic force and transmission electron microscopies and X-ray diffraction. Highly epitaxial oriented films of 20-40 nm in thickness are obtained by PLA. The crystallization kinetics of laser treatments is determined to be orders of magnitude faster than thermal treatments with similar activation energies (1.5-4.1 eV), mainly due to the large temperature gradients inducing modified atomic diffusion mechanisms derived mainly from photothermal interactions, as well as a minor contribution of photochemical effects. The fast heating rates achieved by PLA also contribute to the fast epitaxial growth due to reduced coarsening of polycrystalline material. The measurement of the physical properties (electrical resistivity and magnetism) of laser processed CSD films has revealed significantly good functionalities, close to those of thermally grown films, but with much shorter processing times.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultraviolet pulsed laser crystallization of Ba0.8Sr0.2TiO3 films on LaNiO3-coated silicon substrates

  • Queraltó López, Albert
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • De La Mata, Maria|||0000-0002-1581-4838
  • Tristany, Mar
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Trolier-McKinstry, Susan
In this work, BaSrTiO (BST) films on LaNiO-buffered SiO/Si (LNO/SiO/Si) substrates were crystallized by pulsed laser irradiation. Solution-derived amorphous barium-strontium-titanate precursor layers were crystallized with a KrF excimer laser in oxygen ambient at fluences ranging from 50 to 75 mJ cm. With the substrate temperature set to 500 °C, the number of pulses and film thickness were varied until high-quality crystallinity could be achieved. It was found that films with a thickness of 40 nm are fully crystallized with a uniaxial {00l} orientation which is predetermined by the LaNiO orientation. On the other hand, for 160 nm thick films, crystallization was observed after 12,000 pulses in the 70 nm close to the surface, while the rest of the film remained amorphous. The large temperature difference between the film surface and interface due to the low thermal conductivity of the amorphous BST is suggested as the origin of this behavior. Films thicker than 80 nm cracked on crystallization due to the stress caused by the different thermal expansion coefficients of film and substrate, as well as the large temperature variations within the BST film.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Disentangling Epitaxial Growth Mechanisms of Solution Derived Functional Oxide Thin Films

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
This study investigates the mechanisms of epitaxial development and functional properties of oxide thin films (CeZrO , LaNiO, and BaSrTiO) grown on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) by the chemical solution deposition approach. Rapid thermal annealing furnaces are very powerful tools in this study providing valuable information of the early stages of nucleation, the kinetics of epitaxial film growth, and the coarsening of nanocrystalline phases. Advanced transmission electron microscopies, X-ray diffraction, and atomic force microscopy are employed to investigate the film microstructure and morphology, microstrain relaxation, and epitaxial crystallization. This study demonstrates that the isothermal evolution toward epitaxial film growth follows a self-limited process driven by atomic diffusion, and surface and interface energy minimization. All investigated oxides experience a transformation from the polycrystalline to the epitaxial phase. This study unequivocally evidences that the film thickness highly influences the epitaxial crystallization rate due to the competition between heterogeneous and homogeneous nucleation barriers and the fast coarsening of polycrystalline grains as compared to epitaxial growth. The investigated films possess good functional properties, and this study successfully confirms an improvement at long annealing times that can be correlated with grain boundary healing processes. Thick epitaxial films can be crystallized by growing sequential individual epitaxial layers.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-, XGdxO2- y nanowires derived from chemical solutions

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Martínez Orellana, Lidia|||0000-0002-9370-2962
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Gibert, Marta|||0000-0001-8856-6831
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hühne, Ruben
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a high-throughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented Ce₀.₉Gd₀.₁O₂ᵧ (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO₃ (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001)CGO[0-11](011)LAO[100] growth orientation, with the enlargement occurring along the [0-11]CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min⁻¹) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications.