Pasar al contenido principal

NANOHILOS BIOACTIVOS ACTUADOS MAGNETICA Y FOTOQUIMICAMENTE PARA LIBERACION DE FARMACOS CON CONTROL REMOTO

PCIN-2016-093

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simultaneous local heating/thermometry based on plasmonic magnetochromic nanoheaters

  • Li, Zhi
  • López-Ortega, Alberto
  • Aranda-Ramos, Antonio
  • Tajada Herráiz, José Luis
  • Sort, Jordi
  • Nogués, Carme
  • Vavassori, Paolo
  • Nogués, Josep
  • Sepúlveda, Borja
A crucial challenge in nanotherapies is achieving accurate and real‐time control of the therapeutic action, which is particularly relevant in local thermal therapies to minimize healthy tissue damage and necrotic cell deaths. Here, a nanoheater/thermometry concept is presented based on magnetoplasmonic (Co/Au or Fe/Au) nanodomes that merge exceptionally efficient plasmonic heating and simultaneous highly sensitive detection of the temperature variations. The temperature detection is based on precise optical monitoring of the magnetic‐induced rotation of the nanodomes in solution. It is shown that the phase lag between the optical signal and the driving magnetic field can be used to detect viscosity variations around the nanodomes with unprecedented accuracy (detection limit 0.0016 mPa s, i.e., 60‐fold smaller than state‐of‐the‐art plasmonic nanorheometers). This feature is exploited to monitor the viscosity reduction induced by optical heating in real‐time, even in highly inhomogeneous cell dispersions. The magnetochromic nanoheater/thermometers show higher optical stability, much higher heating efficiency and similar temperature detection limits (0.05 °C) compared to state‐of‐the art luminescent nanothermometers. The technological interest is also boosted by the simpler and lower cost temperature detection system, and the cost effectiveness and scalability of the nanofabrication process, thereby highlighting the biomedical potential of this nanotechnology., This work was supported by the Spanish Ministry of Economy, Industry and Competitivenes (MINECO) projects MAT2013‐48628‐R, MAT2016‐77391‐R, and PCIN‐2016‐093 (H2020 M‐ERA.NET). Z.L. acknowledges the Chinese Scholarship Council (CSC) Program (201506950059) for financial support. The 2017‐SGR‐292 project of the Generalitat de Catalunya is acknowledged. The ICN2 was funded by the Centres de Recerca de Catalunya (CERCA) programme/Generalitat de Catalunya. The ICN2 was supported by the Severo Ochoa programme (MINECO, No. SEV‐2013‐0295). A.L.‐O. and P.V. acknowledge funding from the Basque Government (No. PI2015_1_19), MINECO and the European Regional Development Fund (FEDER) (No. FIS2015 64519 R). A.L.‐O. acknowledges the support from Juan de la Cierva grant. This work was also supported by MINECO under the Maria de Maeztu Units of Excellence (MDM‐2016‐0618). J.S. acknowledges the financial support by the European Research Council (SPIN‐PORICS 2014‐Consolidator Grant, Agreement No. 648454)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the operational mechanisms of chemically propelled motors with micropumps

  • Esplandiú, María J.
  • Zhang, Kuan
  • Fraxedas, J.
  • Sepúlveda, Borja
  • Reguera, David
The development of effective autonomous micro- and nanomotors relies on controlling fluid motion at interfaces. One of the main challenges in the engineering of such artificial machines is the quest for efficient mechanisms to power them without using external driving forces. In the past decade, there has been an important increase of man-made micro- and nanomotors fueled by self-generated physicochemical gradients. Impressive proofs of concept of multitasking machines have been reported demonstrating their capabilities for a plethora of applications. While the progress toward applications is promising, there are still open questions on fundamental physicochemical aspects behind the mechanical actuation, which require more experimental and theoretical efforts. These efforts are not merely academic but will open the door for an efficient and practical implementation of such promising devices. In this Account, we focus on chemically driven motors whose motion is the result of a complex interplay of chemical reactions and (electro)hydrodynamic phenomena. A reliable study of these processes is rather difficult with mobile objects like swimming motors. However, pumps, which are the immobilized motor counterparts, emerge as simple manufacturing and well-defined platforms for a better experimental probing of the mechanisms and key parameters controlling the actuation. Here we review some recent studies using a new methodology that has turned out to be very helpful to characterize micropump chemomechanics. The aim was to identify the redox role of the motor components, to map the chemical reaction, and to quantify the relevant electrokinetic parameters (e.g., electric field and fluid flow). This was achieved by monitoring the velocity of differently charged tracers and by fluorescence imaging of the chemical species involved in the chemical reaction, for example, proton gradients. We applied these techniques to different systems of interest. First, we probed bimetallic pumps as counterparts of the pioneering bimetallic swimmers. We corroborated that fluid motion was due to a self-generated electro-osmotic mechanism driven by the redox decomposition of H2O2. In addition, we analyzed by simulations the key parameters that yield an optimized operation. Moreover, we accomplished a better assessment of the importance of surface chemistry on the metal electrochemical response, highlighting its relevance in controlling the redox role of the metals and motion direction. Second, we focused on metallic and semiconductor micropumps to analyze light-controlled motion mechanisms through photoelectrochemical decomposition of fuels. These pumps were driven by visible light and could operate using just water as fuel. In these systems, we found a very interesting competition between two different mechanisms for fluid propulsion, namely, light-activated electro-osmosis and light-insensitive diffusio-osmosis, stemming from different chemical pathways in the fuel decomposition. In this case, surface roughness becomes a pivotal parameter to enhance or depress one mechanism over the other. These examples demonstrate that pumps are practical platforms to explore operating mechanisms and to quantify their performance. Additionally, they are suitable systems to test novel fuels or motor materials. This knowledge is extensible to swimmers providing not only fundamental understanding of their locomotion mechanisms but also useful clues for their design and optimization., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under Contract Nos. MAT2015-68307-P, FIS2015-67837, and M-ERA.NET Project PCIN2016-093. The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of MINECO (Grant SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water-mediated photo-induced reduction ofplatinum films

  • Fraxedas, J.
  • Zhang, Kuan
  • Sepúlveda, Borja
  • Esplandiú, María J.
  • Garcia, Xènia
  • Llorca, Jordi
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
Platinum thin films activated ex situ by oxygen plasma become reduced by the combined effect of an intense soft X-ray photon beam and condensed water. The evolution of the electronic structure of the surface has been characterized by near-ambient-pressure photoemission and mimics the inverse two-step sequence observed in the electro-oxidation of platinum, i.e. the surface-oxidized platinum species are reduced first and then the adsorbed species desorb in a second step leading to a surface dominated by metallic platinum. The comparison with measurements performed under high-vacuum conditions suggests that the reduction process is mainly induced by the reactive species generated by the radiolysis of water. When the photon flux is decreased, then the reduction process becomes slower., The following funding is acknowledged: Ministerio de Economia y Competitividad (grant No. MAT2015-68307-P; grantNo. PCIN-2016-093); Generalitat de Catalunya (grant No.2017 SGR 128). The ICN2 is funded by the CERCA program/Generalitat de Catalunya. The ICN2 is supported by theSevero Ochoa program of MINECO (grant SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid Ni@ZnO@ZnS‐microalgae for circular economy: A smart route to the efficient integration of solar photocatalytic water decontamination and bioethanol production

  • Serrà, Albert
  • Artal, Raül
  • García Amorós, Jaume
  • Sepúlveda, Borja
  • Gómez, Elvira
  • Nogués, Josep
  • Philippe, Laetitia
Water remediation and development of carbon‐neutral fuels are a priority for the evermore industrialized society. The answer to these challenges should be simple, sustainable, and inexpensive. Thus, biomimetic‐inspired circular and holistic processes combing water remediation and biofuel production can be an appealing concept to deal with these global issues. A simple circular approach using helical Spirulina platensis microalgae as biotemplates to synthesize Ni@ZnO@ZnS photocatalysts for efficient solar water decontamination and bioethanol production during the recycling process is presented. Under solar irradiation, the Ni@ZnO@ZnS‐Spirulina photocatalyst exhibits enhanced activity (mineralization efficiency >99%) with minimal photocorrosion and excellent reusability. At the end of its effective lifetime for water remediation, the microalgae skeleton (mainly glycogen and glucose) of the photocatalyst is recycled to directly produce bioethanol by simultaneous saccharification and fermentation process. An outstanding ethanol yield of 0.4 L kg−1, which is similar to the highest yield obtained from oxygenic photosynthetic microorganisms, is obtained. Thus, the entire process allows effective solar photocatalytic water remediation and bioethanol production at room temperature using simple and easily scalable procedures that simultaneously fixes carbon dioxide, thereby constituting a zero‐carbon‐emission circular process., The work leading to these results received funding from Metrohm foundation, from the 2017‐SGR‐292 project from the Generalitat de Catalunya, and the PCIN2016‐093 and TEC2017‐85059‐C3‐2‐R projects (co‐financed by the Fondo Europeo de Desarrollo Regional, FEDER) from the Spanish Ministerio de Economía y Competitividad (MINECO). The authors also acknowledge Espirulina Natural (Dra. Ester Falgàs) and Societé Industrielle Lesaffre, Division Leaf for the provision of the microalgae and Ethanol Red yeast, respectively. A.S. would like to acknowledge funding from the EMPAPOSTDOCS‐II program. The EMPAPOSTDOCS‐II programme has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement number 754364. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV‐2017‐0706)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Simultaneous Local Heating/Thermometry Based on Plasmonic Magnetochromic Nanoheaters, Simultaneous local nano-heating/thermometry based on plasmonic magnetochromic nanodomes

  • Li, Zhi
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Aranda-Ramos, Antonio|||0000-0003-3476-7026
  • Tajada Herraiz, José Luis
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Carme|||0000-0002-6361-8559
  • Vavassori, Paolo
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
A crucial challenge in nanotherapies is achieving accurate and real-time control of the therapeutic action, which is particularly relevant in local thermal therapies to minimize healthy tissue damage and necrotic cell deaths. Here, a nanoheater/thermometry concept is presented based on magnetoplasmonic (Co/Au or Fe/Au) nanodomes that merge exceptionally efficient plasmonic heating and simultaneous highly sensitive detection of the temperature variations. The temperature detection is based on precise optical monitoring of the magnetic-induced rotation of the nanodomes in solution. It is shown that the phase lag between the optical signal and the driving magnetic field can be used to detect viscosity variations around the nanodomes with unprecedented accuracy (detection limit 0.0016 mPa s, i.e., 60-fold smaller than state-of-the-art plasmonic nanorheometers). This feature is exploited to monitor the viscosity reduction induced by optical heating in real-time, even in highly inhomogeneous cell dispersions. The magnetochromic nanoheater/thermometers show higher optical stability, much higher heating efficiency and similar temperature detection limits (0.05 °C) compared to state-of-the art luminescent nanothermometers. The technological interest is also boosted by the simpler and lower cost temperature detection system, and the cost effectiveness and scalability of the nanofabrication process, thereby highlighting the biomedical potential of this nanotechnology.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly active ZnO-based biomimetic fern-like microleaves for photocatalytic water decontamination using sunlight

  • Serrà, Albert|||0000-0003-0147-3400
  • Zhang, Yue|||0000-0001-7106-363X
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Gomez, Elvira|||0000-0002-9223-6357
  • Nogués, Josep|||0000-0003-4616-1371
  • Michler, Johann|||0000-0001-8860-4068
  • Philippe, Laetitia|||0000-0003-0928-4487
Here we present the highly enhanced sunlight photocatalytic efficiency and photocorrosion resistance of biomimetic ZnO-modified micro/nanofern fractal architectures, which are synthesized by using a novel, simple, inexpensive and green electrochemical deposition approach in high stirring conditions. Such fern-like hierarchical structures simultaneously combine enhanced angle independent light trapping and surface/bulk modifications of the ZnO morphology to drastically increase: i) the light trapping and absorption in the visible near-infrared range, and ii) the surface to volume ratio of the architecture. This combination is crucial for boosting the sunlight photocatalytic efficiency. To modulate the electronic properties for extending the operation of the ZnO photocatalysts into the visible domain we have used three different modification approaches: sulfidation (leading to a ZnS shell), Ag decoration, and Ni-doping. The different ZnO-modified bioinspired fern-like fractal structures have been used to demonstrate their efficiency in the photodegradation and photoremediation of three different persistent organic pollutants -methylene blue, 4-nitrophenol, and Rhodamine B - under UV light, simulated and natural UV-filtered sunlight. Remarkably, the ZnO@ZnS core@shell structures exhibited an outstanding photocatalytic activity compared to the pristine ZnO catalyst, with over 6-fold increase in the pollutant degradation rate when using solar light. In fact, the catalytic performance of the ZnO@ZnS micro/nanoferns for the photoremediation of persistent organic pollutants is comparable to or better than the most competitive state-of-the-art ZnO photocatalysts, but showing a negligible photocorrosion. Ag-decorated ZnO, and Ni-doped ZnO exhibited similar excellent visible-sunlight photodegradation efficiency. Although the Ni-doped photocatalysts showed a relatively poor photocorrosion resistance, it was acceptable for Ag-decorated ZnO. Therefore, the easy fabrication and the capacity to drastically enhance the sunlight photocatalytic efficiency of the ZnO@ZnS bioinspired micro/nanoferns, together with their practically negligible photocorrosion and simple recyclability in terms of non-catalyst poisoning, makes them very promising photocatalysts for water remediation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid Ni@ZnO@ZnS-Microalgae for Circular Economy, a Smart Route to the Efficient Integration of Solar Photocatalytic Water Decontamination and Bioethanol Production

  • Serrà, Albert|||0000-0003-0147-3400
  • Artal, Raül
  • García Amorós, Jaume
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Gomez, Elvira|||0000-0002-9223-6357
  • Nogués, Josep|||0000-0003-4616-1371
  • Philippe, Laetitia|||0000-0003-0928-4487
Water remediation and development of carbon-neutral fuels are a priority for the evermore industrialized society. The answer to these challenges should be simple, sustainable, and inexpensive. Thus, biomimetic-inspired circular and holistic processes combing water remediation and biofuel production can be an appealing concept to deal with these global issues. A simple circular approach using helical Spirulina platensis microalgae as biotemplates to synthesize Ni@ZnO@ZnS photocatalysts for efficient solar water decontamination and bioethanol production during the recycling process is presented. Under solar irradiation, the Ni@ZnO@ZnS-Spirulina photocatalyst exhibits enhanced activity (mineralization efficiency.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Photochemically Activated Motors, From Electrokinetic to Diffusion Motion Control

  • Zhang, Kuan
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
Self-propelled micro/nanomotors that can transform chemical energy from the surrounding environment into mechanical motion are cutting edge nanotechnologies with potential applications in biomedicine and environmental remediation. These applications require full understanding of the propulsion mechanisms to improve the performance and controllability of the motors. In this work, we demonstrate that there are two competing chemomechanical mechanisms at semiconductor/metal (Si/Pt) micromotors in a pump configuration under visible light exposure. The first propulsion mechanism is driven by an electro-osmotic process stemmed from a photoactivation reaction mediated by HO, which takes place in two separated redox reactions at the Si and Pt interfaces. One reaction involves the oxidation of HO at the silicon side, and the other the HO reduction at the metal side. The second mechanism is not light responsive and is triggered by the redox decomposition of HO exclusively at the Pt surface. We show that it is possible to enhance/suppress one mechanism over the other by tuning the surface roughness of the micromotor metal. More specifically, the actuation mechanism can be switched from light-controlled electrokinetics to light-insensitive diffusio-osmosis by only increasing the metal surface roughness. The different actuation mechanisms yield strikingly different fluid flow velocities, electric fields, and light sensitivities. Consequently, these findings are very relevant and can have a remarkable impact on the design and optimization of photoactivated catalytic devices and, in general, on bimetallic or insulating-metallic motors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly reduced ecotoxicity of ZnO-based micro/nanostructures on aquatic biota, influence of architecture, chemical composition, fixation, and photocatalytic efficiency

  • Serrà, Albert|||0000-0003-0147-3400
  • Zhang, Yue|||0000-0001-7106-363X
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Gomez, Elvira|||0000-0002-9223-6357
  • Nogués, Josep|||0000-0003-4616-1371
  • Michler, Johann|||0000-0001-8860-4068
  • Philippe, Laetitia|||0000-0003-0928-4487
Developing efficient sunlight photocatalysts with enhanced photocorrosion resistance and minimal ecotoxicological effects on aquatic biota is critical to combat water contamination. Here, the role of chemical composition, architecture, and fixation on the ecotoxicological effects on microalgae of different ZnO and ZnO@ZnS based water decontamination photocatalysts was analyzed in depth. In particular, the ecotoxicological effects of films, nanoparticles and biomimetic micro/nano-ferns were carefully assessed by correlating the algae's viability to the Zn(II) release, the photocatalyst-microalgae interaction, and the production of reactive oxygen species (ROS). The results showed a drastic improvement in algal viability for supported ZnO@ZnS core@shell micro/nanoferns, as their ecotoxicity after 96 h light exposure was significantly lower (3.7-10.0% viability loss) compared to the ZnO films (18.4-35.5% loss), ZnO micro/nanoferns (28.5-53.5% loss), ZnO nanoparticles (48.3-91.7% loss) or ZnO@ZnS nanoparticles (8.6-19.2% loss) for catalysts concentrations ranging from 25 mgL¯¹ to 400 mgL¯¹. In particular, the ZnO@ZnS micro/nanoferns with a concentration of 400 mg L exhibited excellent photocatalytic efficiency to mineralize a multi-pollutant solution (81.4 ± 0.3% mineralization efficiency after 210 min under UV-filtered visible light irradiation) and minimal photocorrosion (<5% of photocatalyst dissolution after 96 h of UV-filtered visible light irradiation). Remarkably, the ZnO@ZnS micro/nanoferns showed lower loss of algal viability (9.8 ± 1.1%) after 96 h of light exposure, with minimal reduction in microalgal biomass (9.1 ± 1.0%), as well as in the quantity of chlorophyll-a (9.5 ± 1.0%), carotenoids (8.6 ± 0.9%) and phycocyanin (5.6 ± 0.6%). Altogether, the optimized ZnO@ZnS core@shell micro/nanoferns represent excellent ecofriendly photocatalysts for water remediation in complex media, as they combine enhanced sunlight remediation efficiency, minimal adverse effects on biological microorganisms, high reusability and easy recyclability.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Water-mediated photo-induced reduction of platinum films

  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Zhang, Kuan
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Garcia, Xènia|||0000-0003-0795-4168
  • Llorca, Jordi|||0000-0002-7447-9582
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
Platinum thin films activated ex situ by oxygen plasma become reduced by the combined effect of an intense soft X-ray photon beam and condensed water. The evolution of the electronic structure of the surface has been characterized by near-ambient-pressure photoemission and mimics the inverse two-step sequence observed in the electro-oxidation of platinum, i.e. the surface-oxidized platinum species are reduced first and then the adsorbed species desorb in a second step leading to a surface dominated by metallic platinum. The comparison with measurements performed under high-vacuum conditions suggests that the reduction process is mainly induced by the reactive species generated by the radiolysis of water. When the photon flux is decreased, then the reduction process becomes slower.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanochromic detection for soft opto-magnetic actuators

  • Güell Grau, Pau|||0000-0002-2363-4079
  • Escudero Villa, Pedro Fernando|||0000-0003-0534-2328
  • Perdikos, Filippos Giannis
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Pascual-Izarra, Carlos
  • Villa, Rosa|||0000-0003-2735-3204
  • Nogués, Josep|||0000-0003-4616-1371
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Alvarez, Mar|||0000-0003-4590-4401
New multi-stimuli responsive materials are required in smart systems applications to overcome current limitations in remote actuation and to achieve versatile operation in inaccessible environments. The incorporation of detection mechanisms to quantify in real time the response to external stimuli is crucial for the development of automated systems. Here, we present the first wireless opto-magnetic actuator with mechanochromic response. The device, based on a nanostructured-iron (Fe) layer transferred onto suspended elastomer structures with a periodically corrugated backside, can be actuated both optically (in a broadband spectral range) and magnetically. The combined opto-magnetic stimulus can accurately modulate the mechanical response (strength and direction) of the device. The structural coloration generated at the corrugated back surface enables to easily map and quantify, in 2D, the mechanical deflections by analyzing in real time the hue changes of images taken using a conventional RGB smartphone camera, with a precision of 0.05°. We demonstrate the independent and synergetic optical and magnetic actuation and detection with a detection limit of 1.8 mW·cm -2 and 0.34 mT, respectively. The simple operation, versatility, and cost-effectiveness of the wireless multiactuated device with highly sensitive mechanochromic mapping paves the way to a new generation of wirelessly controlled smart systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultrabroadband light absorbing Fe/polymer flexible metamaterial for soft opto-mechanical devices

  • Güell Grau, Pau|||0000-0002-2363-4079
  • Pi, F.|||0000-0001-7347-4897
  • Villa, Rosa|||0000-0003-2735-3204
  • Nogués, Josep|||0000-0003-4616-1371
  • Alvarez, Mar|||0000-0003-4590-4401
  • Sepúlveda, Borja|||0000-0002-1562-7602
Ultrabroadband light absorbers are attracting increasing interest for applications in energy harvesting, photodetection, self-regulated devices or soft robotics. However, current absorbers show detrimental insufficient absorption spectral range, or light angle and polarization dependence. Here we show that the unexplored optical properties of highly-damped plasmonic materials combined with the infrared absorption of thin polymer films enable developing ultrabroadband light-absorbing soft metamaterials. The developed metamaterial, composed of a nanostructured Fe layer mechanically coupled to a thin polydimethylsiloxane (PDMS) film, shows unprecedented ultrabroadband and angle-independent optical absorption (averaging 84% within 300-18000 nm). The excellent photothermal efficiency and large thermal-expansion mismatch of the metamaterial is efficiently transformed into large mechanical deflections, which we exploit to show an artificial iris that self-regulates the transmitted light power from the ultraviolet to the long-wave infrared, an untethered light-controlled mechanical gripper and a light-triggered electrical switch.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Efficient tumor eradication at ultralow drug concentration via externally controlled and boosted metallic iron magnetoplasmonic nanocapsules

  • Fluksman, Arnon|||0000-0003-1057-6209
  • Lafuente, Aritz|||0000-0002-1497-5744
  • Li, Zhi
  • Sort, Jordi|||0000-0003-1213-3639
  • Lope-Piedrafita, Silvia|||0000-0002-8127-6425
  • Esplandiu Egido, Maria José|||0000-0003-2079-0639
  • Nogués, Josep|||0000-0003-4616-1371
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Benny, Ofra|||0000-0002-2468-5978
  • Sepúlveda, Borja|||0000-0002-1562-7602
With the aim to locally enhance the efficacy of cancer nanotherapies, here we present metal iron based magnetoplasmonic drug-loaded nanocapsules (MAPSULES), merging powerful external magnetic concentration in the tumor and efficient photothermal actuation to locally boost the drug therapeutic action at ultralow drug concentrations. The MAPSULES are composed of paclitaxel-loaded polylactic-co-glycolic acid (PLGA) nanoparticles partially coated by a nanodome shape iron/silica semishell. The iron semishell has been designed to present a ferromagnetic vortex for incorporating a large quantity of ferromagnetic material while maintaining high colloidal stability. The large iron semishell provides very strong magnetic manipulation via magnetophoretic forces, enabling over 10-fold higher trapping efficiency in microfluidic channels than typical superparamagnetic iron oxide nanoparticles. Moreover, the iron semishell exhibits highly damped plasmonic behavior, yielding intense broadband absorbance in the near-infrared biological windows and photothermal efficiency similar to the best plasmonic nanoheaters. The in vivo therapeutic assays in a mouse xenograft tumor model show a high amplification of the therapeutic effects by combining magnetic concentration and photothermal actuation in the tumor, leading to a complete eradication of the tumors at ultralow nanoparticle and drug concentration (equivalent to only 1 mg/kg PLGA nanoparticles containing 8 μg/kg of paclitaxel, i.e., 100-500-fold lower than the therapeutic window of the free and PLGA encapsulated drug and 13-3000-fold lower than current nanotherapies combining paclitaxel and light actuation). These results highlight the strength of this externally controlled and amplified therapeutic approach, which could be applied to locally boost a wide variety of drugs for different diseases.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Soft Optomechanical Systems for Sensing, Modulation, and Actuation

  • Pujol Vila, Ferran|||0000-0002-6811-2426
  • Güell Grau, Pau|||0000-0002-2363-4079
  • Nogués, Josep|||0000-0003-4616-1371
  • Alvarez, Mar|||0000-0003-4590-4401
  • Sepúlveda, Borja|||0000-0002-1562-7602
Soft optomechanical systems have the ability to reversibly respond to optical and mechanical external stimuli by changing their own properties (e.g., shape, size, viscosity, stiffness, color or transmittance). These systems typically combine the optical properties of plasmonic, dielectric or carbon-based nanomaterials with the high elasticity and deformability of soft polymers, thus opening the path for the development of new mechanically tunable optical systems, sensors, and actuators for a wide range of applications. This review focuses on the recent progresses in soft optomechanical systems, which are here classified according to their applications and mechanisms of optomechanical response. The first part summarizes the soft optomechanical systems for mechanical sensing and optical modulation based on the variation of their optical response under external mechanical stimuli, thereby inducing mechanochromic or intensity modulation effects. The second part describes the soft optomechanical systems for the development of light induced mechanical actuators based on different actuation mechanisms, such as photothermal effects and phase transitions, among others. The final section provides a critical analysis of the main limitations of current soft optomechanical systems and the progress that is required for future devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modular Drug-Loaded Nanocapsules with Metal Dome Layers as a Platform for Obtaining Synergistic Therapeutic Biological Activities

  • Fluksman, Arnon|||0000-0003-1057-6209
  • Braunstein, Ron
  • Steinberg, Eliana
  • Friedman, Nethanel
  • Yekhin, Zhanna
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Nogués, Josep|||0000-0003-4616-1371
  • Hazan, Ronen
  • Sepúlveda Martínez, Borja
  • Benny, Ofra|||0000-0002-2468-5978
  • Lafuente, Aritz|||0000-0002-1497-5744
Multifunctional drug-loaded polymer-metal nanocapsules have attracted increasing attention in drug delivery due to their multifunctional potential endowed by drug activity and response to physicochemical stimuli. Current chemical synthesis methods of polymer/metal capsules require specific optimization of the different components to produce particles with precise properties, being particularly complex for Janus structures combining polymers and ferromagnetic and highly reactive metals. With the aim to generate tunable synergistic nanotherapeutic actuation with enhanced drug effects, here we demonstrate a versatile hybrid chemical/physical fabrication strategy to incorporate different functional metals with tailored magnetic, optical, or chemical properties on solid drug-loaded polymer nanoparticles. As archetypical examples, we present poly(lactic- co -glycolic acid) (PLGA) nanoparticles (diameters 100-150 nm) loaded with paclitaxel, indocyanine green, or erythromycin that are half-capped by either Fe, Au, or Cu layers, respectively, with application in three biomedical models. The Fe coating on paclitaxel-loaded nanocapsules permitted efficient magnetic enhancement of the cancer spheroid assembly, with 40% reduction of the cross-section area after 24 h, as well as a higher paclitaxel effect. In addition, the Fe-PLGA nanocapsules enabled external contactless manipulation of multicellular cancer spheroids with a speed of 150 μm/s. The Au-coated and indocyanine green-loaded nanocapsules demonstrated theranostic potential and enhanced anticancer activity in vitro and in vivo due to noninvasive fluorescence imaging with long penetration near-infrared (NIR) light and simultaneous photothermal-photodynamic actuation, showing a 3.5-fold reduction in the tumor volume growth with only 5 min of NIR illumination. Finally, the Cu-coated erythromycin-loaded nanocapsules exhibited enhanced antibacterial activity with a 2.5-fold reduction in the MIC50 concentration with respect to the free or encapsulated drug. Altogether, this technology can extend a nearly unlimited combination of metals, polymers, and drugs, thus enabling the integration of magnetic, optical, and electrochemical properties in drug-loaded nanoparticles to externally control and improve a wide range of biomedical applications.