Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Influence of Surface Compositions on the Reactivity of Pyrite toward Aqueous U(VI)

  • Ma, Bin
  • Fernández Martínez, Alejandro
  • Kang, Mingliang
  • Wang, Kaifeng
  • Lewis, Aled R
  • Maffeis, Thierry G. G.
  • Findling, Nathaniel
  • Salas Colera, Eduardo
  • Tisserand, Delphine
  • Bureau, Sarah
  • Charlet, Laurent
Pyrite plays a significant role in governing the mobility of toxic uranium in an anaerobic environment via an oxidation–reduction process occurring at the mineral–water interface, but the factors influencing the reaction kinetics remain poorly understood. In this study, natural pyrites with different impurities (Pb, As, and Si) and different surface pretreatments were used to react with aqueous U(VI) from pH ∼3.0 to ∼9.5. Both aqueous and solid results indicated that freshly crushed pyrites, which do have more surface Fe2+/Fe3+ and S2– sites that were generated from breakage of Fe(S)–S bonds during ball milling, exhibited a much stronger reactivity than those treated with acid washing. Besides, U(VI) reduction which involves the possible intermediate U(V) and the formation of hyperstoichiometric UO2+x(s) was found to preferentially occur at Pb- and As-rich spots on the pyrite surface, suggesting that the incorporated impurities could act as reactive sites because of the generation of lattice defects and galena- and arsenopyrite-like local configurations. These reactive surface sites can be removed by acid washing, leaving a pyrite surface nearly inert toward aqueous U(VI). Thus, reactivity of pyrite toward U(VI) is largely governed by its surface compositions, which provides an insight into the chemical behavior of both pyrite and uranium in various environments., The authors are grateful to Eugene S. Ilton (PNNL, USA) for the XPS data interpretation and Robin Pauer (Empa, Switzerland) for the EDX spectrum treatment. This work was financially supported by the National Natural Science Foundation of China (NSFC, nos. 41773095 and 41403075), the Fundamental Research Funds for the Central Universities of Sun Yat-sen University (no. 201545000-31610011), ANDRA, and Labex OSUG@2020 (Investissements d’avenir—ANR10 LABX56). B.M. also appreciates the financial support from the China Scholarship Council (CSC) and European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement number 754364. The synchrotron facilities ESRF (BM25A-25-01-976) are acknowledged for the allocation of beam time.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Simple environmentally-friendly reduction of 4-nitrophenol

  • Serrà i Ramos, Albert
  • Artal López, Raúl
  • Pozo, Maria
  • Garcia Amorós, Jaume
  • Gómez, Elvira
Abstract: 4-nitrophenol is a low molecular-mass organic compound involved in many chemical processes and commonly present in soils and in surface and ground waters, thereby causing severe environmental impact and health risk. Several methods have been proposed for its transformation (bio and chemical degradation). However, these strategies not only produce equally or more toxic aromatic species but also require harsh operating conditions and/or time-consuming treatments. In this context, we report a comprehensive and systematic study of the electrochemical reduction of 4-nitrophenol as a viable alternative. We have explored the electrochemical reduction of this pollutant over different metallic and carbonaceous substrata. Specifically, we have focused on the use of gold and silver working electrodes since they combine a high electrocatalytic activity for 4-nitrophenol reduction and a low electrocatalytic capacity for hydrogen evolution. The influence of the pH, temperature, and applied potential have also been considered as crucial parameters in the overall optimization of the process. While acidic media and high temperatures favor the clean reduction of 4-nitrophenol to 4-aminophenol, simultaneous hydrogen evolution results pernicious for this purpose. As a whole, a simple and effective electrochemical method for the transformation of 4-nitrophenol into 4-aminophenolis proposed with virtually no undesired by-products.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Recycled cyanobacteria ashes for sono-enhanced photo-Fenton wastewater decontamination

  • Artal López, Raúl
  • Philippe, Laetitia
  • Gómez, Elvira
  • Serrà i Ramos, Albert
Currently, there is massive generation of persistent organic pollutants, which are hazardous sub-stances, owing to the exponential industrial growth and the associated waste production. Conse-quently, green and reliable strategies for decontaminating wastewater and generating value-added products are needed to realize the global demand of sustainability. In this study, an efficient sustain-able circular process for water remediation with nearly zero residue production is developed using iron-rich cyanobacteria ashes. These cyanobacteria ashes are obtained from the combustion of Ar-throspira platensis var lonar and are used as Fenton-like photocatalysts in different assisted photo-Fenton reactions (processes enhanced by light). The use of these iron-rich cyanobacteria ashes is par-ticularly effective for the sono-enhanced photo-Fenton processes for water remediation (mineraliza-tion > 94.9%), with an outstanding reusability. At the end of the effective lifetime of the photocata-lyst, the remaining ashes can be subsequently reused as a supplement during the growth of new cy-anobacteria, thus closing the circular process. The proposed approach is a green and sustainable pro-cess integrating both carbon dioxide fixation and clean-water production aimed at attaining sustain-able development.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Highly reduced ecotoxicity of ZnO-based micro/nanostructures on aquatic biota: Influence of architecture, chemical composition, fixation, and photocatalytic efficiency

  • Serrà i Ramos, Albert
  • Zhang, Yue
  • Sepúlveda, Borja
  • Gómez, Elvira
  • Nogués, Josep
  • Michler, Johann
  • Philippe, Laetitia
Developing efficient sunlight photocatalysts with enhanced photocorrosion resistance and minimal eco-toxicological effects on aquatic biota is critical to combat water contamination. Here, the role of chem-ical composition, architecture, and fixation on the ecotoxicological effects on microalgae of different ZnO and ZnO@ZnS based water decontamination photocatalysts was analyzed in depth. In particular, the ecotoxicological effects of films, nanoparticles and biomimetic micro/nano-ferns were carefully as-sessed by correlating the algae's viability to the Zn(II) release, the photocatalyst-microalgae interac-tion, and the production of reactive oxygen species (ROS). The results showed a drastic improvement in algal viability for supported ZnO@ZnS core@shell micro/nanoferns, as their ecotoxicity after 96 h light exposure was significantly lower (3.7-10.0% viability loss) compared to the ZnO films (18.4-35.5% loss), ZnO micro/nanoferns (28.5-53.5% loss), ZnO nanoparticles (48.3-91.7% loss) or ZnO@ZnS nanoparticles (8.6-19.2% loss) for catalysts concentrations ranging from 25 mg L-1 to 400 mg L-1. In particular, the ZnO@ZnS micro/nanoferns with a concentration of 400 mg L-1 exhibited ex-cellent photocatalytic efficiency to mineralize a multi-pollutant solution (81.4±0.3% mineralization ef-ficiency after 210 min under UV-filtered visible light irradiation) and minimal photocorrosion (< 5% of photocatalyst dissolution after 96 h of UV-filtered visible light irradiation). Remarkably, the ZnO@ZnS micro/nanoferns showed lower loss of algal viability (9.8±1.1%) after 96 h of light exposure, with min-imal reduction in microalgal biomass (9.1±1.0%), as well as in the quantity of chlorophyll-a (9.5±1.0%), carotenoids (8.6±0.9%) and phycocyanin (5.6±0.6%). Altogether, the optimized ZnO@ZnS core@shell micro/nanoferns represent excellent ecofriendly photocatalysts for water reme-diation in complex media, as they combine enhanced sunlight remediation efficiency, minimal adverse effects on biological microorganisms, high reusability and easy recyclability.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Hybrid Ni@ZnO@ZnS-Microalgae for circular economy: A smart route to the efficient integration of solar photocatalytic water decontamination and bioethanol production

  • Serrà i Ramos, Albert
  • Artal López, Raúl
  • Garcia Amorós, Jaume
  • Sepúlveda, Borja
  • Gómez, Elvira
  • Nogués, Josep
  • Philippe, Laetitia
Water remediation and development of carbon-neutral fuels are priority objectives of our evermore industrialized society. The answer to these challenges should be simple, sustainable, and inexpensive. Thus, biomimetic-inspired circular and holistic processes combing water remediation and biofuel production can be an appealing concept to deal with these global issues. A simple circular approach using helical Spirulina platensis microalgae as biotemplates to synthesize Ni@ZnO@ZnS photocatalysts for efficient solar water decontamination and bioethanol production during the recycling process is presented. Under solar irradiation, the Ni@ZnO@ZnS-Spirulina photocatalyst exhibited enhanced activity (mineralization efficiency > 99%) with minimal photocorrosion and excellent reusability. At the end of its effective lifetime for water remediation, the microalgae skeleton (mainly glycogen and glucose) of the photocatalyst was recycled to directly produce bioethanol by simultaneous saccharification and fermentation process. An outstanding ethanol yield of 0.4 L kg-1, which is similar to the highest yield obtained from oxygenic photosynthetic microorganisms, was obtained. Thus, the entire process allows effective solar photocatalytic water remediation and bioethanol production at room temperature using simple and easily scalable procedures that simultaneously fixes carbon dioxide, thereby constituting a zero-carbon-emission circular process.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-situ formation of one-dimensional coordination polymers in molecular junctions

  • Vladyka, Anton
  • Perrin, Mickael L.
  • Overbeck, Jan
  • Ferradás, R.
  • García-Suárez, Víctor M.
  • Gantenbein, Markus
  • Brunner, Jan
  • Mayor, Marcel
  • Ferrer, Jaime
  • Calame, Michel
We demonstrate the bottom-up in-situ formation of organometallic oligomer chains at the single-molecule level. The chains are formed using the mechanically controllable break junction technique operated in a liquid environment, and consist of alternating isocyano-terminated benzene monomers coordinated to gold atoms. We show that the chaining process is critically determined by the surface density of molecules. In particular, we demonstrate that by reducing the local supply of molecules within the junction, either by lowering the molecular concentration or by adding side groups, the oligomerization process can be suppressed. Our experimental results are supported by ab-initio simulations, confirming that the isocyano terminating groups display a high tendency to form molecular chains, as a result of their high affinity for gold. Our findings open the road for the controlled formation of one-dimensional, single coordination-polymer chains as promising model systems of organometallic frameworks., This work was partially supported the EC FP7-ITN MOLESCO grant (No. 606728). M.P. acknowledges funding by the EMPAPOSTDOCS-II programme which is financed by the European Unions Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement number 754364. J.O. and M.C. gratefully acknowledge financial support from the Swiss Nanoscience Institute. Generous support by the Swiss National Science Foundation (SNF grant No. 00020-159730) is gratefully acknowledged by M.G. and M.M., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid Ni@ZnO@ZnS‐microalgae for circular economy: A smart route to the efficient integration of solar photocatalytic water decontamination and bioethanol production

  • Serrà, Albert
  • Artal, Raül
  • García Amorós, Jaume
  • Sepúlveda, Borja
  • Gómez, Elvira
  • Nogués, Josep
  • Philippe, Laetitia
Water remediation and development of carbon‐neutral fuels are a priority for the evermore industrialized society. The answer to these challenges should be simple, sustainable, and inexpensive. Thus, biomimetic‐inspired circular and holistic processes combing water remediation and biofuel production can be an appealing concept to deal with these global issues. A simple circular approach using helical Spirulina platensis microalgae as biotemplates to synthesize Ni@ZnO@ZnS photocatalysts for efficient solar water decontamination and bioethanol production during the recycling process is presented. Under solar irradiation, the Ni@ZnO@ZnS‐Spirulina photocatalyst exhibits enhanced activity (mineralization efficiency >99%) with minimal photocorrosion and excellent reusability. At the end of its effective lifetime for water remediation, the microalgae skeleton (mainly glycogen and glucose) of the photocatalyst is recycled to directly produce bioethanol by simultaneous saccharification and fermentation process. An outstanding ethanol yield of 0.4 L kg−1, which is similar to the highest yield obtained from oxygenic photosynthetic microorganisms, is obtained. Thus, the entire process allows effective solar photocatalytic water remediation and bioethanol production at room temperature using simple and easily scalable procedures that simultaneously fixes carbon dioxide, thereby constituting a zero‐carbon‐emission circular process., The work leading to these results received funding from Metrohm foundation, from the 2017‐SGR‐292 project from the Generalitat de Catalunya, and the PCIN2016‐093 and TEC2017‐85059‐C3‐2‐R projects (co‐financed by the Fondo Europeo de Desarrollo Regional, FEDER) from the Spanish Ministerio de Economía y Competitividad (MINECO). The authors also acknowledge Espirulina Natural (Dra. Ester Falgàs) and Societé Industrielle Lesaffre, Division Leaf for the provision of the microalgae and Ethanol Red yeast, respectively. A.S. would like to acknowledge funding from the EMPAPOSTDOCS‐II program. The EMPAPOSTDOCS‐II programme has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement number 754364. ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV‐2017‐0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligand size and carbon-chain length study of silver carboxylates in focused electron-beam-induced deposition

  • Jurczyk, Jakub
  • Höflich, Katja
  • Madajska, Katarzyna
  • Berger, Luisa
  • Brockhuis, Leo
  • Edwards, Thomas Edward James
  • Kapusta, Czesław
  • Szymańska, Iwona B.
  • Utke, Ivo
This article belongs to the Special Issue Nanomaterials Fabricated by Electron-Beam-Induced Deposition and Related Processes., Gas-assisted focused electron-beam-induced deposition is a versatile tool for the direct writing of complex-shaped nanostructures with unprecedented shape fidelity and resolution. While the technique is well-established for various materials, the direct electron beam writing of silver is still in its infancy. Here, we examine and compare five different silver carboxylates, three perfluorinated: [Ag2(µ-O2CCF3)2], [Ag2(µ-O2CC2F5)2], and [Ag2(µ-O2CC3F7)2], and two containing branched substituents: [Ag2(µ-O2CCMe2Et)2] and [Ag2(µ-O2CtBu)2], as potential precursors for focused electron-beam-induced deposition. All of the compounds show high sensitivity to electron dissociation and efficient dissociation of Ag-O bonds. The as-deposited materials have silver contents from 42 at.% to above 70 at.% and are composed of silver nano-crystals with impurities of carbon and fluorine between them. Precursors with the shortest carbon-fluorine chain ligands yield the highest silver contents. In addition, the deposited silver content depends on the balance of electron-induced ligand co-deposition and ligand desorption. For all of the tested compounds, low electron flux was related to high silver content. Our findings demonstrate that silver carboxylates constitute a promising group of precursors for gas-assisted focused electron beam writing of high silver content materials., Research of J.J. and I.U. was conducted with the financial support of EU Horizon 2020 Marie Curie-Sklodowska Innovative Training Network “ELENA”, grant agreement No 722149. T.E.J.E. received funding from EMPAPOSTDOCS-II of the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement number 754364. L.B. (Luisa Berger) received support from Swiss National Science Foundation (SNF) project 200021E-164211; I.B.S. and K.M. received support from Nicolaus Copernicus University in Toruń (PDB); K.H. acknowledges the financial support by the Deutsche Forschungsgemeinschaft (DFG) under grant no. HO 5461/3-1., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hybrid Ni@ZnO@ZnS-Microalgae for circular economy: A smart route to the efficient integration of solar photocatalytic water decontamination and bioethanol production

  • Serrà i Ramos, Albert
  • Artal López, Raúl
  • Garcia Amorós, Jaume
  • Sepúlveda, Borja
  • Gómez, Elvira
  • Nogués, Josep
  • Philippe, Laetitia
Water remediation and development of carbon-neutral fuels are priority objectives of our evermore industrialized society. The answer to these challenges should be simple, sustainable, and inexpensive. Thus, biomimetic-inspired circular and holistic processes combing water remediation and biofuel production can be an appealing concept to deal with these global issues. A simple circular approach using helical Spirulina platensis microalgae as biotemplates to synthesize Ni@ZnO@ZnS photocatalysts for efficient solar water decontamination and bioethanol production during the recycling process is presented. Under solar irradiation, the Ni@ZnO@ZnS-Spirulina photocatalyst exhibited enhanced activity (mineralization efficiency > 99%) with minimal photocorrosion and excellent reusability. At the end of its effective lifetime for water remediation, the microalgae skeleton (mainly glycogen and glucose) of the photocatalyst was recycled to directly produce bioethanol by simultaneous saccharification and fermentation process. An outstanding ethanol yield of 0.4 L kg-1, which is similar to the highest yield obtained from oxygenic photosynthetic microorganisms, was obtained. Thus, the entire process allows effective solar photocatalytic water remediation and bioethanol production at room temperature using simple and easily scalable procedures that simultaneously fixes carbon dioxide, thereby constituting a zero-carbon-emission circular process.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Simple environmentally-friendly reduction of 4-nitrophenol

  • Serrà i Ramos, Albert
  • Artal López, Raúl
  • Pozo, Maria
  • Garcia Amorós, Jaume
  • Gómez, Elvira
Abstract: 4-nitrophenol is a low molecular-mass organic compound involved in many chemical processes and commonly present in soils and in surface and ground waters, thereby causing severe environmental impact and health risk. Several methods have been proposed for its transformation (bio and chemical degradation). However, these strategies not only produce equally or more toxic aromatic species but also require harsh operating conditions and/or time-consuming treatments. In this context, we report a comprehensive and systematic study of the electrochemical reduction of 4-nitrophenol as a viable alternative. We have explored the electrochemical reduction of this pollutant over different metallic and carbonaceous substrata. Specifically, we have focused on the use of gold and silver working electrodes since they combine a high electrocatalytic activity for 4-nitrophenol reduction and a low electrocatalytic capacity for hydrogen evolution. The influence of the pH, temperature, and applied potential have also been considered as crucial parameters in the overall optimization of the process. While acidic media and high temperatures favor the clean reduction of 4-nitrophenol to 4-aminophenol, simultaneous hydrogen evolution results pernicious for this purpose. As a whole, a simple and effective electrochemical method for the transformation of 4-nitrophenol into 4-aminophenolis proposed with virtually no undesired by-products.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Recycled cyanobacteria ashes for sono-enhanced photo-Fenton wastewater decontamination

  • Artal López, Raúl
  • Philippe, Laetitia
  • Gómez, Elvira
  • Serrà i Ramos, Albert
Currently, there is massive generation of persistent organic pollutants, which are hazardous sub-stances, owing to the exponential industrial growth and the associated waste production. Conse-quently, green and reliable strategies for decontaminating wastewater and generating value-added products are needed to realize the global demand of sustainability. In this study, an efficient sustain-able circular process for water remediation with nearly zero residue production is developed using iron-rich cyanobacteria ashes. These cyanobacteria ashes are obtained from the combustion of Ar-throspira platensis var lonar and are used as Fenton-like photocatalysts in different assisted photo-Fenton reactions (processes enhanced by light). The use of these iron-rich cyanobacteria ashes is par-ticularly effective for the sono-enhanced photo-Fenton processes for water remediation (mineraliza-tion > 94.9%), with an outstanding reusability. At the end of the effective lifetime of the photocata-lyst, the remaining ashes can be subsequently reused as a supplement during the growth of new cy-anobacteria, thus closing the circular process. The proposed approach is a green and sustainable pro-cess integrating both carbon dioxide fixation and clean-water production aimed at attaining sustain-able development.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Highly reduced ecotoxicity of ZnO-based micro/nanostructures on aquatic biota: Influence of architecture, chemical composition, fixation, and photocatalytic efficiency

  • Serrà i Ramos, Albert
  • Zhang, Yue
  • Sepúlveda, Borja
  • Gómez, Elvira
  • Nogués, Josep
  • Michler, Johann
  • Philippe, Laetitia
Developing efficient sunlight photocatalysts with enhanced photocorrosion resistance and minimal eco-toxicological effects on aquatic biota is critical to combat water contamination. Here, the role of chem-ical composition, architecture, and fixation on the ecotoxicological effects on microalgae of different ZnO and ZnO@ZnS based water decontamination photocatalysts was analyzed in depth. In particular, the ecotoxicological effects of films, nanoparticles and biomimetic micro/nano-ferns were carefully as-sessed by correlating the algae's viability to the Zn(II) release, the photocatalyst-microalgae interac-tion, and the production of reactive oxygen species (ROS). The results showed a drastic improvement in algal viability for supported ZnO@ZnS core@shell micro/nanoferns, as their ecotoxicity after 96 h light exposure was significantly lower (3.7-10.0% viability loss) compared to the ZnO films (18.4-35.5% loss), ZnO micro/nanoferns (28.5-53.5% loss), ZnO nanoparticles (48.3-91.7% loss) or ZnO@ZnS nanoparticles (8.6-19.2% loss) for catalysts concentrations ranging from 25 mg L-1 to 400 mg L-1. In particular, the ZnO@ZnS micro/nanoferns with a concentration of 400 mg L-1 exhibited ex-cellent photocatalytic efficiency to mineralize a multi-pollutant solution (81.4±0.3% mineralization ef-ficiency after 210 min under UV-filtered visible light irradiation) and minimal photocorrosion (< 5% of photocatalyst dissolution after 96 h of UV-filtered visible light irradiation). Remarkably, the ZnO@ZnS micro/nanoferns showed lower loss of algal viability (9.8±1.1%) after 96 h of light exposure, with min-imal reduction in microalgal biomass (9.1±1.0%), as well as in the quantity of chlorophyll-a (9.5±1.0%), carotenoids (8.6±0.9%) and phycocyanin (5.6±0.6%). Altogether, the optimized ZnO@ZnS core@shell micro/nanoferns represent excellent ecofriendly photocatalysts for water reme-diation in complex media, as they combine enhanced sunlight remediation efficiency, minimal adverse effects on biological microorganisms, high reusability and easy recyclability.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid Ni@ZnO@ZnS-Microalgae for Circular Economy, a Smart Route to the Efficient Integration of Solar Photocatalytic Water Decontamination and Bioethanol Production

  • Serrà, Albert|||0000-0003-0147-3400
  • Artal, Raül
  • García Amorós, Jaume
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Gomez, Elvira|||0000-0002-9223-6357
  • Nogués, Josep|||0000-0003-4616-1371
  • Philippe, Laetitia|||0000-0003-0928-4487
Water remediation and development of carbon-neutral fuels are a priority for the evermore industrialized society. The answer to these challenges should be simple, sustainable, and inexpensive. Thus, biomimetic-inspired circular and holistic processes combing water remediation and biofuel production can be an appealing concept to deal with these global issues. A simple circular approach using helical Spirulina platensis microalgae as biotemplates to synthesize Ni@ZnO@ZnS photocatalysts for efficient solar water decontamination and bioethanol production during the recycling process is presented. Under solar irradiation, the Ni@ZnO@ZnS-Spirulina photocatalyst exhibits enhanced activity (mineralization efficiency.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly reduced ecotoxicity of ZnO-based micro/nanostructures on aquatic biota, influence of architecture, chemical composition, fixation, and photocatalytic efficiency

  • Serrà, Albert|||0000-0003-0147-3400
  • Zhang, Yue|||0000-0001-7106-363X
  • Sepúlveda, Borja|||0000-0002-1562-7602
  • Gomez, Elvira|||0000-0002-9223-6357
  • Nogués, Josep|||0000-0003-4616-1371
  • Michler, Johann|||0000-0001-8860-4068
  • Philippe, Laetitia|||0000-0003-0928-4487
Developing efficient sunlight photocatalysts with enhanced photocorrosion resistance and minimal ecotoxicological effects on aquatic biota is critical to combat water contamination. Here, the role of chemical composition, architecture, and fixation on the ecotoxicological effects on microalgae of different ZnO and ZnO@ZnS based water decontamination photocatalysts was analyzed in depth. In particular, the ecotoxicological effects of films, nanoparticles and biomimetic micro/nano-ferns were carefully assessed by correlating the algae's viability to the Zn(II) release, the photocatalyst-microalgae interaction, and the production of reactive oxygen species (ROS). The results showed a drastic improvement in algal viability for supported ZnO@ZnS core@shell micro/nanoferns, as their ecotoxicity after 96 h light exposure was significantly lower (3.7-10.0% viability loss) compared to the ZnO films (18.4-35.5% loss), ZnO micro/nanoferns (28.5-53.5% loss), ZnO nanoparticles (48.3-91.7% loss) or ZnO@ZnS nanoparticles (8.6-19.2% loss) for catalysts concentrations ranging from 25 mgL¯¹ to 400 mgL¯¹. In particular, the ZnO@ZnS micro/nanoferns with a concentration of 400 mg L exhibited excellent photocatalytic efficiency to mineralize a multi-pollutant solution (81.4 ± 0.3% mineralization efficiency after 210 min under UV-filtered visible light irradiation) and minimal photocorrosion (<5% of photocatalyst dissolution after 96 h of UV-filtered visible light irradiation). Remarkably, the ZnO@ZnS micro/nanoferns showed lower loss of algal viability (9.8 ± 1.1%) after 96 h of light exposure, with minimal reduction in microalgal biomass (9.1 ± 1.0%), as well as in the quantity of chlorophyll-a (9.5 ± 1.0%), carotenoids (8.6 ± 0.9%) and phycocyanin (5.6 ± 0.6%). Altogether, the optimized ZnO@ZnS core@shell micro/nanoferns represent excellent ecofriendly photocatalysts for water remediation in complex media, as they combine enhanced sunlight remediation efficiency, minimal adverse effects on biological microorganisms, high reusability and easy recyclability.