Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 74
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Phthalate exposure and the metabolic syndrome: A systematic review and meta-analysis

  • Mérida, Diana María
  • Moreno Franco, Belén
  • Marqués, Montserrat
  • León Latre, Montserrat
  • Laclaustra, Martín
  • Guallar Castillón, María Pilar
Phthalates are chemicals widely used in plastic-based consumer products, and human exposure is universal. They are classified as endocrine disruptors, and specific phthalate metabolites have been associated with an increased risk of cardiometabolic diseases. The aim of this study was to assess the association between phthalate exposure and the metabolic syndrome in the general population. A comprehensive literature search was performed in four databases (Web of Science, Medline, PubMed, and Scopus). We included all the observational studies that evaluate the association between phthalate metabolites and the metabolic syndrome available until January 31st, 2023. Pooled Odds Ratios (OR) and their 95% confidence intervals were calculated by using the inversevariance weighted method. Nine cross-sectional studies and 25,365 participants aged from 12 to 80 were included. Comparing extreme categories of phthalate exposure, the pooled ORs for the metabolic syndrome were: 1.08 (95% CI, 1.02–1.16, I 2 = 28%) for low molecular weight phthalates, and 1.11 (95% CI, 1.07–1.16, I 2 = 7%) for high molecular weight phthalates. For individual phthalate metabolites, the pooled ORs that achieved statistical significance were: 1.13 (95% CI, 1.00–1.27, I 2 = 24%) for MiBP; 1.89 (95% CI, 1.17–3.07, I 2 = 15%) for MMP in men; 1.12 (95% CI, 1.00–1.25, I 2 = 22%) for MCOP; 1.09 (95% CI, 0.99–1.20, I 2 = 0%) for MCPP; 1.16 (95% CI, 1.05–1.28, I 2 = 6%) for MBzP; and 1.16 (95% CI, 1.09–1.24, I 2 = 14%) for DEHP (including ΣDEHP and its metabolites). In conclusion, both low molecular weight and high molecular weight phthalates were associated with an 8 and 11% higher prevalence of the MetS, respectively. The exposure to six specific phthalate metabolites was associated with a higher prevalence of the MetS, Data collection was funded by the following grants: FIS PI17/1709, PI20/144 (State Secretary of R + D and FEDER/FSE), and the CIBERESP, Instituto de Salud Carlos III. Madrid, Spain. MM has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement [(No 801342 (Tecniospring INDUSTRY)] and the Government of Catalonia’s Agency for Business Competitiveness (ACCIO) ´ (TECSPR19-1-0022)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Self-supported NiO/CuO electrodes to boost urea oxidation in direct urea fuel cells

  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Wang, Xiang
  • Yang, Tingting
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Lu, Xuan|||0000-0003-2453-2805
  • Liang, Zhifu
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct urea fuel cells (DUFCs) can be used to treat residual wastewater while generating electricity. Herein, self-supported electrodes consisting of NiO nanosheets vertically grown on CuO nanowires are synthesized to realize the urea oxidation reaction (UOR). Such electrodes show excellent UOR performance requiring 1.39 V vs. RHE to achieve 100 mA/cm. Besides, DUFCs provide open circuit voltages and power densities up to 0.88 V and 11.35 mW/cm. Electrochemical characterization and Raman spectroscopy prove the formation of NiOOH to enable the UOR. Mott-Schottky analysis and UV photoelectron spectroscopy show the NiO/CuO p-p heterostructure to facilitate the charge transfer from CuO nanowires to NiO nanosheets. Besides, at a local level, density functional theory calculations show that the presence of CuO modulates the electronic states of Ni at the very NiOOH/CuO interface, which results in stretched Ni-O bonds and a uniquely elongated N-H bond of urea that favors its oxidation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced Electrochemical Hydrogenation of Benzaldehyde to Benzyl Alcohol on Pd@Ni-MOF by Modifying the Adsorption Configuration

  • Gong, Li
  • Zhang, Chao Yue
  • Li, Junshan|||0000-0002-1482-1972
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Botifoll, Marc|||0000-0002-4876-6393
  • Guo, Tiezhu
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Jin Yuan
  • Kallio, Tanja|||0000-0001-6671-8582
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Electrocatalytic hydrogenation (ECH) approaches under ambient temperature and pressure offer significant potential advantages over thermal hydrogenation processes but require highly active and efficient hydrogenation electrocatalysts. The performance of such hydrogenation electrocatalysts strongly depends not only on the active phase but also on the architecture and surface chemistry of the support material. Herein, Pd nanoparticles supported on a nickel metal-organic framework (MOF), Ni-MOF-74, are prepared, and their activity toward the ECH of benzaldehyde (BZH) in a 3 M acetate (pH 5.2) aqueous electrolyte is explored. An outstanding ECH rate up to 283 μmol cm h with a Faradaic efficiency (FE) of 76% is reached. Besides, higher FEs of up to 96% are achieved using a step-function voltage. Materials Studio and density functional theory calculations show these outstanding performances to be associated with the Ni-MOF support that promotes H-bond formation, facilitates water desorption, and induces favorable tilted BZH adsorption on the surface of the Pd nanoparticles. In this configuration, BZH is bonded to the Pd surface by the carbonyl group rather than through the aromatic ring, thus reducing the energy barriers of the elemental reaction steps and increasing the overall reaction efficiency.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Minimizing Human Labeling in Training Deep Models for Pedestrian Intention Prediction

  • Riaz, Muhammad Naveed|||0000-0002-0250-5913
  • Wielgosz, Maciej|||0000-0002-4401-2957
  • López Peña, Antonio M.|||0000-0002-6979-5783
Accurately predicting whether pedestrians will cross in front of an autonomous vehicle is essential for ensuring safe and comfortable maneuvers. However, developing models for this task remains challenging due to the limited availability of diverse datasets containing both crossing (C) and non-crossing (NC) scenarios. Therefore, we propose a procedure that leverages synthetic videos with C/NC labels and an untrained model whose architecture is designed for C/NC prediction to automatically produce C/NC labels for a set of real-world videos. Thus, this procedure performs a synth-to-real unsupervised domain adaptation for C/NC prediction, so we term it S2R-UDA-CP. To assess the effectiveness of S2R-UDA-CP in self-labeling, we utilize two state-of-the-art models, PedGNN and ST-CrossingPose, and we rely on the publicly-available PedSynth dataset, which consists of synthetic videos with C/NC labels. Notably, once the real-world videos are self-labeled, they can be used to train models different from those used in S2R-UDA-CP. These models are designed to operate onboard a vehicle, whereas S2R-UDA-CP is an offline procedure. To evaluate the quality of the C/NC labels generated by S2R-UDA-CP, we also employ PedGraph+ (another literature referent) as it is not used in S2R-UDA-CP. Overall, the results show that training models to predict C/NC using videos labeled by S2R-UDA-CP achieves performance even better than models trained on human-labeled data. Our study also highlights different discrepancies between automatic and human labeling. To the best of our knowledge, this is the first study to evaluate synth-to-real self-labeling for C/NC prediction.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electromechanical computational modeling of heart failure provides extensive analysis of cardiac pathophysiological features

  • Casoni, Eva
  • Zingaro, Alberto
  • Gomez, Juan F.
  • Pozo, Jose M.
  • Gonzalez-Martin, Pablo
  • Vazquez, Mariano
  • Aguado-Sierra, Jazmin
  • Mora-Fenoll, María Teresa|||0000-0002-8069-2486
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
[EN] This study applies a high-performance, fully coupled 3D-0D electromechanical model to simulate cardiac function across multiple scenarios of heart failure with reduced ejection fraction (HFrEF), including ventricular tachycardia post-myocardial infarction and acute hypertension. By integrating biomechanical deformation, electromechanical coupling, and hemodynamic feedback, the model provides a comprehensive analysis of different stages of heart failure. A physiologically detailed 3D-0D electromechanical model was used to simulate pressure-volume loops under different pathological conditions. The model incorporates hemodynamic coupling within an electromechanical framework to quantify left ventricular performance markers in virtual scenarios. Additionally, myocardial strains along the principal fiber direction were computed to assess systolic dysfunction and deformation. The simulations accurately predicted the hemodynamic impact of HFrEF according to their electrophysiological and mechanical properties. The computationally derived pressure-volume loops demonstrated a strong agreement with clinical findings, highlighting key features of HFrEF such as reduced stroke volume, impaired contractility, and decreased ejection fraction. Furthermore, scar-related conduction abnormalities were associated with an increased risk of ventricular tachycardia, with failing hearts exhibiting greater hemodynamic instability during arrhythmic episodes. The proposed computational framework provides a powerful tool for investigating HFrEF progression and electromechanical dysfunction. By accurately replicating pressure-volume loop characteristics and hemodynamic alterations commonly seen in clinical settings, this model enhances the understanding of HFrEF and may support the development of targeted therapeutic strategies., This work was partially funded by grant PID2022-136273OA-C33 and by grant PID2022-140553OB-C41 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. EC, AZ, P.G-M MV, and JAS acknowledge the European Union - EIC Project No 190134524: "ELEM Virtual Heart Populations for Supercomputers" (ELVIS). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or EISMEA. Neither the European Union nor the granting authority can be held responsible for them. AZ, MV, and JAS acknowledge the European Union's Horizon Europe research and innovation program under grant agreement No 101136728 (VITAL). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or EISMEA. Neither the European Union nor the granting authority can be held responsible for them. JMP has received funding from the European Union's Horizon 2020 research and innovation program under Marie Sk & lstrok;odowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIo)
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Activating Thermoplastic Polyurethane Surfaces with Poly(ethylene glycol)-Based Recombinant Human α‑Defensin 5 Monolayers for Antibiofilm Activity

  • Rodríguez Rodríguez, Xavier
  • López-Cano, Adrià
  • Mayolo-Deloisa, Karla
  • Pich, Oscar Q.
  • Bierge, Paula
  • Ventosa, Nora
  • García-de-la-Maria, Cristina
  • Miró, José M.
  • Gasch, Oriol
  • Veciana, Jaume
  • Guasch, Judith
  • Arís, Anna
  • Garcia-Fruitos, Elena
  • Ratera, Imma
  • FUNCATH
Addressing multidrug-resistant microbial infections linked to implantable biomedical devices is an urgent need. In recent years, there has been an active exploration of different surface coatings to prevent and combat drug-resistant microbes. In this research, we present a facile chemical modification of thermoplastic polyurethane (TPU) surfaces with poly(ethylene glycol)-based recombinant human α-defensin 5 (HD5) protein with antimicrobial activity. TPU is one of the most relevant materials used for medical devices with good mechanical properties but also good chemical resistance, which makes it difficult to modify. The chemical modification of TPU surfaces is achieved via a three-step procedure based on (i) TPU activation using hexamethylene diisocyanate (HDI); (ii) interfacial reaction with poly(ethylene glycol) (PEG) derivatives; and finally, (iii) a facile click reaction between the PEG-maleimide terminated assembled monolayers on the TPU and the cysteine (-thiol) termination of the recently designed recombinant human α-defensin 5 (HD5) protein. The obtained PEG based HD5 assembled monolayers on TPU were characterized using a surface science multitechnique approach including scanning electron microscopy, atomic force microscopy, contact angle, and X-ray photoelectron spectroscopy. The modified TPU surfaces with the HD5 protein derivative exhibit broad-spectrum antibacterial properties reducing biofilm formation against Pseudomonas aeruginosa (Gram-negative), methicillin-resistant Staphylococcus aureus (MRSA) (Gram-positive) and methicillin-resistant Staphylococcus epidermidis (MRSE) (Gram-positive). These findings underscore the substantial potential of protein-modified TPU surfaces for applications in combating bacterial infections associated with implantable materials and devices., Financial support by the MICIU of Spain (projects PID2019105622RBI00, PID2020-115296RA-I00, PID2022-137332OBI00, CEX2019-000917-S, CEX2023- 001263-S), CSIC (project 2023AEP092), the Marató de TV3 foundation (project number 201812-30-31-32-33 and 202326-30-31-32-33), and the Generalitat de Catalunya (project SGR Cat 2021-00438 and 2021-01552) is acknowledged. The authors are also grateful for the financial support received from Instituto de Salud Carlos III and the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBERBBN). J.G. is grateful to the Max Planck Institute for Medical Research (Heidelberg, Germany) for their collaboration through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy”. ICMAB-CSIC acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S). J.M.M. received a personal 80:20 research grant from the Institut d’Investigacions Biomediques August Pi i Sunyer (IDIBAPS), Barcelona, Spain, during 2017−24. This work has been developed inside the Materials Science PhD program of Universitat Autonoma de Barcelona. X.R.R. was supported by a grant PTA2021-020955-I funded by MCIN/AEI/10.13039/ 501100011033 and the FSE. This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIO; TECSPR19-1-0065). A.L.-C. received a predoctoral fellowship from Generalitat de Catalunya (FIAGAUR), and P.B. was supported by a PFIS predoctoral fellowship (FI20/00009) from the Instituto de Salud Carlos III. The authors also acknowledge the ICTS NANBIOSIS for the support of the Biomaterial Processing and Nanostructuring Unit (U6) at ICMAB-CSIC (https://www.nanbiosis.es/ portfolio/u6-biomaterial-processing-and-nanostructuring-unit/, info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Nucleic acid-loaded poly(beta-aminoester) nanoparticles for cancer nano-immuno therapeutics, the good, the bad, and the future

  • Magana Rodriguez, Jose Rodrigo
  • Guerra-Rebollo, Marta
  • Borrós, Salvador
  • Fornaguera, Cristina
Immunotherapy has emerged as a promising approach to cancer treatment, offering improved survival rates and enhanced patients’ quality of life. However, realizing the full potential of immunotherapy in clinical practice remains a challenge, as there is still plenty of room for modulating the complexity of the human immune system in favor of an antitumor immunogenicity. Nanotechnology, with its unique properties, holds promise in augmenting the efficacy of cancer immunotherapies in biotherapeutic protection and site- and time-controlled delivery of the immune modulator biologicals. Polymeric nanoparticles are promising biomaterials among different nanocarriers thanks to their robustness, versatility, and cost-efficient design and production. This perspective paper overviews critical concepts in nanometric advanced delivery systems applied to cancer immunotherapy. We focus on a detailed exploration of the current state of the art and trends in using poly(beta-aminoester) (pBAE) polymers for nucleic acid-based antitumor immunotherapies. Through different examples of the use of pBAE polymers reported in the literature, we revise the main advantages these polymers offer and some challenges to overcome. Finally, the paper provides insights and predictions on the path toward the clinical implementation of cancer nano-immunotherapies, highlighting the potential of pBAE polymers for advancements in this field., info:eu-repo/semantics/publishedVersion
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High performance LATP thin film electrolytes for all-solid-state microbattery applications

  • Siller, Valerie
  • Morata, Alex
  • Nuñez Eroles, Marc
  • Arenal, Raúl
  • Gonzalez-Rosillo, Juan Carlos
  • López del Amo, Juan Miguel
  • Tarancón, Albert
This article is part of the themed collection: Recent Open Access Articles., The NASICON superionic solid electrolyte Li1+xAlxTi2−x(PO4)3 (LATP) with 0.3 ≤ x ≤ 0.5 remains one of the most promising solid electrolytes thanks to its good ionic conductivity and outstanding stability in ambient air. Despite the intensive research for bulk systems, there are only very few studies of LATP in a thin film form (thickness < 1 μm) and its implementation in all-solid-state batteries and microbatteries. The following study fills this gap by exploring the properties of high performance LATP thin films fabricated by large-area Pulsed Laser Deposition (PLD). The as-deposited thin films exhibit an ionic conductivity of around 0.5 μS cm−1 at room temperature (comparable to the state-of-the-art of LiPON) which increases to a remarkably high value of 0.1 mS cm−1 after an additional annealing at 800 °C. A possible cause for this significant enhancement in ionic conductivity by two orders of magnitude is the formation of a glassy, intergranular phase. The performance of both as-deposited and annealed LATP films makes them suitable as solid electrolytes, which opens the path to a new family of stable and high performance all-solid-state thin film batteries., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 824072 (HARVESTORE), from the European Regional Development Fund under the FEDER Catalonia Operative Programme 2014-2020 (FEM-IoT, 001-P-00166) and the “Generalitat de Catalunya” (2017 SGR 1421, NANOEN). FIB, HRSTEM, EDS and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) and the MICINN through project grants MAT2016-79776-P (AEI/FEDER, UE) and PID2019-104739GB-I00 as well as from the European Union H2020 program “ESTEEM3” (823717). J. C. G.-R., acknowledges the financial support provided by the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 801342 (Tecniospring INDUSTRY), as well as by the Agency for Business Competitiveness of the Government of Catalonia. NMR measurements were supported and carried out at the Centre for Cooperative Research on Alternative Energies (CIC energiGUNE) as a member of the Basque Research and Technology Alliance (BRTA). Suitable Si3N4 substrates and microelectrodes have been provided by the Institute of Microelectronics of Barcelona IMB-CNM. Pt-covered Si substrates have been fabricated by the Interuniversity Microelectronics Centre (imec) in Leuven, Belgium. GI-XRD measurements have been collected at the Scientific and Technological Center (CCiT) at the University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoswitchable allosteric modulators for metabotropic glutamate receptors

  • Gómez-Santacana, Xavier
  • Panarello, Silvia
  • Rovira, Xavier
  • Llebaria, Amadeu
Metabotropic glutamate receptors (mGlu) are a family of class C G protein-coupled receptors (GPCRs) with important biological functions and widespread expression. The mechanisms of mGlu activation and the development of allosteric modulators for these dimeric proteins have attracted singular attention including the use of light regulated ligands. Photopharmacology involves the integration of a photoactive moiety into the ligand structure that following specific illumination undergoes a structural rearrangement and changes its biological activity. The use of light-regulated allosteric ligands offers the opportunity to manipulate mGlu signalling with spatiotemporal precision, unattainable with classical pharmacological approaches. In this review, we will discuss some of the innovations that have been made in the allosteric photopharmacology of mGlu receptors to date. We discuss the prospects of these molecular tools in the control of mGluRs and the new perspectives in understanding mGlu mechanisms, pharmacology and (patho)physiology that can ultimately result in innovative drug discovery concepts., The project on which these results are based has received funding from Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación 10.13039/501100011033 and ERDF A way of making Europe (projects I+D+i CTQ2017-89222-R, PCI2018-093047 and PID2020-120499RB-I00), the Neuron-ERANET program (MAGNOLIA project), by the Catalan government (2017 SGR 1604) to AL and XR, and the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY, TECSPR19-1-0062) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ) to XG-S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Safe extended-range cycling of Li4Ti5O12-based anodes for ultra-high capacity thin-film batteries

  • Siller, Valerie
  • Gonzalez-Rosillo, Juan Carlos
  • Nuñez Eroles, Marc
  • Stchakovsky, Michel
  • Arenal, Raúl
  • Morata, Alex
  • Tarancón, Albert
Lithium titanium oxide thin films are increasingly popular anode materials in microbatteries and hybrid supercapacitors, due to their improved safety, cost, and cycle lifetime. So far, research efforts have mainly focused on the pure spinel phase Li4Ti5O12 (LTO) and only a small fraction is dedicated to a broader spectrum of titanium-based metal oxide thin films. In this work, pulsed laser deposition is used in a multilayer approach by alternating LTO and Li2O ablations to create a heterogeneous landscape in the titania-based micro-anodes. This rich microstructure enables the safe extension of the accessible electrochemical window down to 0.2 V. This leads to extraordinary high specific capacities of 250–300 mAh/g at 1 C, maintaining a stable discharge capacity of 180 mAh/g at 16 C. Operando spectroscopic ellipsometry and Raman spectroscopy are used to track optical and structural changes as a function of the discharge voltage down to 0.01 V. A kinetically limited degradation mechanism based on the effective trapping of Li-ions at the octahedral 16c positions is proposed when cycling in the range of 0.2–0.01 V. In essence, our work contributes to titania-based nanoshapes as anodes of increased specific capacity due to a higher Li-site occupation, while maintaining their good stability and safety., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 824072 (HARVESTORE), the European Regional Development Fund under the FEDER Catalonia Operative Programme 2014–2020 (FEM-IoT, 001-P-00166), and the “Generalitat de Catalunya” (2017 SGR 1421, NANOEN). FIB, STEM, and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. A. gratefully acknowledges the support from the Spanish MICINN through project grant PID2019-104739 GB-100/AEI/10.13039/501100011033, from the Government of Aragon (project DGA E13-20R) and European Union H2020 program “ESTEEM3" (823717). J. C. G.- R., acknowledges the financial support provided by the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 801342 (Tecniospring INDUSTRY), as well as by the Agency for Business Competitiveness of the Government of Catalonia. Spectroscopic Ellipsometry measurements and models have been developed in collaboration with HORIBA France SAS. Suitable Pt-covered Si substrates have been provided by the Institute of Microelectronics of Barcelona IMB-CNM. GI-XRD measurements have been collected at the Scientific and Technological Center (CCiT) at the University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical Quatsome-RGD Nanoarchitectonic Surfaces for Enhanced Integrin-Mediated Cell Adhesion

  • Martínez Miguel, Marc
  • Castellote Borrell, Miquel
  • Köber, Mariana
  • Kyvik Ruiz, Adriana
  • Tomsen Melero, Judit
  • Vargas Nadal, Guillem
  • Muñoz Martín, José M.
  • Pulido, Daniel
  • Cristóbal Lecina, Edgar
  • Passemard, Solène
  • Royo, Miriam
  • Mas Torrent, Marta
  • Veciana, Jaume
  • Giannotti, Marina I.
  • Guasch, Judit
  • Ventosa, Nora
  • Ratera, Immaculada
The synthesis and study of the tripeptide Arg-Gly-Asp (RGD), the binding site of different extracellular matrix proteins, e.g., fibronectin and vitronectin, has allowed the production of a wide range of cell adhesive surfaces. Although the surface density and spacing of the RGD peptide at the nanoscale have already shown a significant influence on cell adhesion, the impact of its hierarchical nanostructure is still rather unexplored. Accordingly, a versatile colloidal system named quatsomes, based on fluid nanovesicles formed by the self-assembling of cholesterol and surfactant molecules, has been devised as a novel template to achieve hierarchical nanostructures of the RGD peptide. To this end, RGD was anchored on the vesicle's fluid membrane of quatsomes, and the RGD-functionalized nanovesicles were covalently anchored to planar gold surfaces, forming a state of quasi-suspension, through a long poly(ethylene glycol) (PEG) chain with a thiol termination. An underlying self-assembled monolayer (SAM) of a shorter PEG was introduced for vesicle stabilization and to avoid unspecific cell adhesion. In comparison with substrates featuring a homogeneous distribution of RGD peptides, the resulting hierarchical nanoarchitectonic dramatically enhanced cell adhesion, despite lower overall RGD molecules on the surface. The new versatile platform was thoroughly characterized using a multitechnique approach, proving its enhanced performance. These findings open new methods for the hierarchical immobilization of biomolecules on surfaces using quatsomes as a robust and novel tissue engineering strategy., This work was supported by MICINN (PID2019-105622RBI00, MAT2016-80826-R, PID2019-111682RB-I00, PID2020-115296RA-I00, CTQ2015-66194-R; SAF2014-60138-R, RTI2018-093831-B-I00, and PDC2021-121481-I00); Instituto de Salud Carlos III (ISCIII) through the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine, CIBER-BBN (FlexQS-skin, FlexCAB, BBN18PI01, BBN20PIV02, and CB/06/0074); Generalitat de Catalunya (grants 2017-SGR-918, 2017-SGR-229, 2017-SGR-1442, 2017-SGR-1439); the Fundació Marató de TV3 (Nr. 201812); the COST Action CA15126 Between Atom and Cell, and “ERDF A way of making Europe”. J.G. acknowledges financial support from the Ramón y Cajal Program (RYC-2017-22614) from MICINN and the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck Institute for Medical Research (Heidelberg, Germany). This work has received funding from the European Union’s Horizon 2020 research and innovation program through grant agreements 953110 (PHOENIX), 720942 (Smart4Fabry), 101007804 (MICRO4NANO), and 801342 (granted to the Agency for Business Competitiveness ACCIÓ through a Tecniospring Industry fellowship (TECSPR19-1-0065)). ICMAB acknowledges support from MICINN through the “‘Severo Ochoa”’ Programme for Centres of Excellence in R&D (CEX2019-000917-S). J.M. acknowledges a “Juan de la Cierva” fellowship from MICINN. J.T-M. acknowledges an FI-AGAUR grant (2020FI_B2 00137) from Generalitat de Catalunya and the European Social Fund. We also acknowledge the ICTS “NANBIOSIS for the support of the Synthesis of Peptides Unit (U3) at IQAC–CSIC (https://www.nanbiosis.es/portfolio/u3-synthesis-of-peptides-unit/) and the Biomaterial Processing and Nanostructuring Unit (U6) at ICMAB-CSIC (https://www.nanbiosis.es/portfolio/u6-biomaterial-processing-and-nanostructuring-unit/). We are grateful to the SMP unit of the Scientific and Technological Centers of University of Barcelona (CCiTUB). This work has been developed under the “Biochemistry, Molecular Biology and Biomedicine” and “Materials Science” Ph.D. programs of Universitat Autònoma de Barcelona (UAB)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A complete compact model for simulation of organic electronic systems

  • Arnal, August
  • Martínez-Domingo, Carmen
  • Terés, Lluís
  • Ramón, Eloi
Organic Electronics provides multiple technological advantages such as low cost, flexibility, solution processability and waste reduction through the use of new materials and alternative fabrication techniques in the microelectronic world. The use of additive and printed fabrication processes allows the development of instantly fabricated, fully additive, low temperature processing together with lightweight, bendable, scalable and sustainable systems. Different models have been presented in the field but none of them with an industrial implementation. Complete simulation models are very useful for circuit production and commercialization since the organic electronics market is expected to grow in the near future and the need for industrial solutions for designers will increase. For this reason and for the first time, we present a compact model of DC and AC behaviour combined with different ambient conditions and parameter variability for full organic electronic system simulations., This work was supported by MICIU-Spain (RTI2018-102070-B-C21), MICIU-Spain (RTC2019-007226-7), Marie Skłodowska-Curie No 801342 (Tecniospring INDUSTRY), NeuDrive Ltd. (UK) for providing the devices and circuits manufactured., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compact fluidic electrochemical sensor platform for on-line monitoring of chemical oxygen demand in urban wastewater

  • Duan, Wenchao
  • Gunes, Murat
  • Baldi Coll, Antonio
  • Gich, Martí
  • Fernández Sánchez, César
The rapid expansion of urban areas has given rise to the generation of large amounts of wastewater that pose a growing pressure on the surrounding ecosystems. Effective water quality surveillance programs demand the implementation of in-field tests to monitor water safe discharge in the environment after being adequately treated. This paper describes the manufacturing and application of a miniaturized electrochemical sensor for measuring dissolved chemical oxygen demand (COD) in surface waters entering and exiting urban wastewater treatment plants (UWWTP). Thin-film carbon electrodes are produced on Si/SiO2 substrates by a combined sol–gel material synthesis and photolithography/dry etching process at the wafer level and show superior electrochemical performance compared with the glassy carbon standard electrode. Three-electrode electrochemical cells of planar configuration are produced and the COD sensor is manufactured by electrodepositing copper nanoparticles (Cu NPs) on the working electrode under controlled potentiostatic conditions. A simple fluidic electrochemical sensor device is fabricated and allows for the Cu NPs electrodeposition as well as analytical sensor performance in an automatic fashion. A linear range up to 670 mg·L-1 O2 and a limit of detection of 30 mg·L-1 O2 are achieved. The ability of this electrochemical sensor approach to monitoring the soluble organic load of urban wastewater in real-time is evaluated by analyzing three samples collected in different locations of an UWWTP. The COD values estimated with the sensor are in excellent agreement with those obtained using the standard dichromate method provided by an accredited laboratory. This analytical platform provides a robust, user-friendly low-maintenance flow sensor approach for deployed analysis of COD that could aid to control the effectiveness of water treatment processes, especially when facing water influents containing organic overloads due to changing weather conditions or any anthropogenic phenomena., The Chinese Scholarship Council fellowship (201806220063) to W.C. Duan is acknowledged. WD is enrolled in the Materials Science PhD Program of the UAB (Universitat Autònoma de Barcelona). This work has also received funding from the EU Horizon 2020 framework programme under the Marie Skłodowska-Curie grant agreement No 801342 (Tecniospring INDUSTRY)” and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). The Spanish Ministry of Science and Innovation is acknowledged for financial support through the Severo Ochoa programme for Centers of Excellence in R&D (CEX2019-000917-S). Some additional funding was also given by the government of Catalonia, with grants numbers 2017 SGR 1771 and 2017 SGR 765. The X-ray diffraction and thermal analysis laboratories of the ICMAB scientific services contributed to this work and are acknowledged. This work used the Spanish ICTS Network MICRONANOFABS which was partly supported by the Spanish Ministry of Science and Innovation. We are very grateful to Mercè Baldi and Josefina Torán for their help and for kindly providing us with the real water samples from the wastewater treatment plant., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of Theta Oscillatory Activity Underlying Fear Expression by mGlu5 Receptors

  • Matulewicz, Pawel
  • Ramos-Prats, Arnau
  • Gómez-Santacana, Xavier
  • Llebaria, Amadeu
  • Ferraguti, Francesco
Metabotropic glutamate 5 receptors (mGlu5) are thought to play an important role in mediating emotional information processing. In particular, negative allosteric modulators (NAMs) of mGlu5 have received a lot of attention as potential novel treatments for several neuropsychiatric diseases, including anxiety-related disorders. The aim of this study was to assess the influence of pre- and post-training mGlu5 inactivation in cued fear conditioned mice on neuronal oscillatory activity during fear retrieval. For this study we used the recently developed mGlu5 NAM Alloswicth-1 administered systemically. Injection of Alloswicth-1 before, but not after, fear conditioning resulted in a significant decrease in freezing upon fear retrieval. Mice injected with Alloswicth-1 pre-training were also implanted with recording microelectrodes into both the medial prefrontal cortex (mPFC) and ventral hippocampus (vHPC). The recordings revealed a reduction in theta rhythmic activity (4-12 Hz) in both the mPFC and vHPC during fear retrieval. These results indicate that inhibition of mGlu5 signaling alters local oscillatory activity in principal components of the fear brain network underlying a reduced response to a predicted threat., This research was funded by the Austrian Science Found grant NR W012060-10 to F.F and by the Dr. Helmut Legerlotz-Stiftung GZ76130 to A.R.-P. Funding by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe, European Union (projects I+D+i CTQ2017-89222-R and PID2020-120499RB-I00), by the Catalan government (2017 SGR 1604) to A.L. European Union’s Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY, TECSPR19-1-0062) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIÓ) to X.G. Open Access Funding by the Austrian Science Fund (FWF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

pyDockDNA: A new web server for energy-based protein-DNA docking and scoring

  • Rodríguez-Lumbreras, Luis A.
  • Jiménez-García, Brian
  • Giménez-Santamarina, Silvia
  • Fernández-Recio, Juan
Proteins and nucleic acids are essential biological macromolecules for cell life. Indeed, interactions between proteins and DNA regulate many biological processes such as protein synthesis, signal transduction, DNA storage, or DNA replication and repair. Despite their importance, less than 4% of total structures deposited in the Protein Data Bank (PDB) correspond to protein-DNA complexes, and very few computational methods are available to model their structure. We present here the pyDockDNA web server, which can successfully model a protein-DNA complex with a reasonable predictive success rate (as benchmarked on a standard dataset of protein-DNA complex structures, where DNA is in B-DNA conformation). The server implements the pyDockDNA program, as a module of pyDock suite, thus including third-party programs, modules, and previously developed tools, as well as new modules and parameters to handle the DNA properly. The user is asked to enter Protein Data Bank files for protein and DNA input structures (or suitable models) and select the chains to be docked. The server calculations are mainly divided into three steps: sampling by FTDOCK, scoring with new energy-based parameters and the possibility of applying external restraints. The user can select different options for these steps. The final output screen shows a 3D representation of the top 10 models and a table sorting the model according to the scoring function selected previously. All these output files can be downloaded, including the top 100 models predicted by pyDockDNA. The server can be freely accessed for academic use (https://model3dbio.csic.es/pydockdna)., This work was supported by grant PID2019-110167RB-I00 funded by MCIN/AEI/10.13039/501100011033. BJ-G. is employed by Zymvol Biomodeling on a project which received funding from the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIÓ).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A modular click ligand-directed approach to label endogenous aminergic GPCRs in live cells

  • Gómez-Santacana, Xavier
  • Boutonnet, Marin
  • Martínez-Juvés, Carles
  • Catena, Juan Lorenzo
  • Moutin, Enora
  • Roux, Thomas
  • Lamarque, Laurent
  • Perroy, Julie
  • Prézeau, Laurent
  • Zwier, Jurriaan M.
  • Llebaria, Amadeu
New technologies based on luminescence have been essential to monitor the organization, signaling, trafficking or ligand binding of G Protein-Coupled Receptors (GPCRs), but they rely on the overexpression of genetically modified receptors. As more and more studies indicate the importance of studying native receptors in their natural environment, it is essential to develop approaches allowing the specific labeling of native receptors. Here we report an innovative ligand directed approach to specifically label residues of native GPCRs upon ligand binding. To this end, we developed a ligand-directed toolbox based on a novel approach that uses molecular modules to build fluorescent ligand-directed probes that can label an archetypical aminergic GPCR (D1R). Our probes can be readily prepared before the labeling reaction from two molecular modules: an activated electrophilic linker which includes a fluorescent dye and a GPCR ligand that may include nucleophilic groups. Thanks to a fast and specific click reaction, the nucleophilic ligand can barely react with the activated linker before it is bound to the native target GPCR and the labeling reaction occurs. Subsequently, the ligand unbinds the GPCR pocket, leaving the receptor fluorescently labeled and fully functional. This novel labeling approach allowed us to label both D1 receptor in transfected cells and native receptors in neuronal cell lines. This approach will pave the way to develop new reagents and assays to monitor endogenous GPCRs distribution, trafficking, activity or binding properties in their native environment., Funding Agence Nationale de la Recherche ANR-17-CE11-0046 Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación and ERDF - A way of making Europe CTQ2017-89222-R Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación and ERDF - A way of making Europe PCI2018-093047 Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación and ERDF - A way of making Europe PID2020-120499RB-I00 Catalan government 2017 SGR 1604 the European Union's Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant agreement No. 801342 (TecniospringINDUSTRY) and the Government of Catalonia's Agency for Business Competitive-ness (ACCIÓ). TECSPR19-1-0062, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Photopharmacology of G -Protein-Coupled Receptors

  • Panarello, Silvia
  • Rovira, Xavier
  • Llebaria, Amadeu
  • Gómez-Santacana, Xavier
G-protein-coupled receptors (GPCRs) are a super-family of membrane proteins and major targets for drug development. However, many GPCRs drug candidates suffer from a lack of selectivity. Photopharmacology gives the possibility of modulating GPCR activity with an unprecedented local and temporal precision with the use of light. In this review, we compile and classify the different strategies in photopharmacology for GPCRs, we revise the different methods of analysis and characterization of light-regulated molecules used for GPCRs, and we give perspective of the impact of photopharmacology in research applications and in the development of new drugs., This standard have received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY, TECSPR19-1-0062) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A MODULAR LIGAND-DIRECTED APPROACH TO LABEL ENDOGENOUS AMINERGIC GPCRS IN LIVE CELLS

  • Gómez-Santacana, Xavier
  • Boutonnet, Marin
  • Martínez-Juvés, Carles
  • Moutin, Enora
  • Catena, Juan Lorenzo
  • Roux, Thomas
  • Lamarque, Laurent
  • Trinquet, Eric
  • Perroy, Julie
  • Prézeau, Laurent
  • Zwier, Jurriaan M.
  • Pin, Jean-Philippe
  • Llebaria, Amadeu
In the last two decades, new technologies based on luminescence have been developed to monitor the organization, signalling or ligand binding of G Protein-Coupled Receptors. These technologies rely on the overexpression of genetically modified (and/or fluorescently tagged) receptors of interest. However, there is an increasing interest in developping approaches to conjugate chemical labels to specific residues of native GPCRs, despite of the low reactivity and the high abundance of such residues. Ligand directed approaches, may offer a solution to this problem. Such approaches consist in molecular probes that include a selective ligand moiety and a reactive moiety. Upon ligand binding, the labelling is directed to a nucleophilic amino acid in the vicinity of the binding pocket. However, this requires the use of non-nucleophilic ligand moieties, which is particularly difficult since many GPCR ligands contain amines or other nucleophilic functional groups. In the present work, we developed an innovative ligand-directed toolbox based on a novel approach. The later uses molecular modules to build fluorescent ligand-directed probes to label an archetypical aminergic GPCR (D1R). Our molecular probes can be readily prepared before the labelling reaction from two molecular modules: an activated electrophilic linker which includes a fluorescent dye and a GPCR ligand that may include nucleophilic groups. Thanks to a fast and specific chemical reaction, the nucleophilic ligand can barely react with the activated linker before it is bound to the native target GPCR and the labelling reaction occurs. Subsequently, the ligand will unbind the GPCR pocket, leaving the receptor fluorescently labelled and fully functional. This novel labelling approach allowed us to label endogenous D1 receptor both in transfected cells and primary cultures of neurons and will pave the way to develop new reagents and assays to monitor endogenous GPCRs distribution and activity in their native environment., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluating the effect of Theory of Mind on people's trust in a faulty robot

  • Rossi, Alessandra
  • Andriella, Antonio
  • Rossi, Silvi
  • Torras, Carme
  • Alenyà, Guillem
Trabajo presentado en el 31st IEEE International Conference on Robot and Human Interactive Communication (RO-MAN), celebrado en Nápoles (Italia), del 29 de agosto al 2 de septiembre de 2022, The success of human-robot interaction is strongly affected by the people's ability to infer others' intentions and behaviours, and the level of people's trust that others will abide by their same principles and social conventions to achieve a common goal. The ability of understanding and reasoning about other agents' mental states is known as Theory of Mind (ToM). ToM and trust, therefore, are key factors in the positive outcome of human-robot interaction. We believe that a robot endowed with a ToM is able to gain people's trust, even when this may occasionally make errors. In this work, we present a user study in the field in which participants (N=123) interacted with a robot that may or may not have a ToM, and may or may not exhibit erroneous behaviour. Our findings indicate that a robot with ToM is perceived as more reliable, and they trusted it more than a robot without a ToM even when the robot made errors. Finally, ToM results to be a key driver for tuning people's trust in the robot even when the initial condition of the interaction changed (i.e., loss and regain of trust in a longer relationship)., This work has been supported by Italian PON R&I 2014-2020 - REACT-EU (CUP E65F21002920003); by the European Union’s Horizon 2020 under ERC Advanced Grant CLOTHILDE (no. 741930); by MCIN/ AEI /10.13039/501100011033 and by the ”European Union NextGenerationEU/PRTR” under the project ROBIN (PLEC2021-007859) and the project COHERENT (PCI2020-120718-2); by the ”European Union NextGenerationEU/PRTR” through CSIC’s Thematic Platforms (PTI+ Neuro-Aging) and by the European Union’s Horizon 2020 research and innovation programme PRO-CARED (no.801342) under Marie Skłodowska-Curie grant agreement (Tecniospring INDUSTRY) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIO).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Implications of robot backchannelling in cognitive therapy

  • Andriella, Antonio
  • Torras, Carme
  • Alenyà, Guillem
Trabajo presentado en la 14th International Conference on Social Robotics , celebrada en Florencia (Italia), del 13 al 16 de diciembre de 2022, The social ability of humans to provide active feedback during conversations is known as backchannelling. Recent work has recognised the importance of endowing robots with such social behaviour to make interactions more natural. Nonetheless, very little is known about how backchannelling should be designed in order to be detected and whether it can have an impact on users' behaviour and performance in cooperative tasks. In this article, we aim at evaluating the legibility of robot's backchannelling behaviour on Persons with Dementia (PwDs) and its effect on their performance when playing cognitive training exercises. Aiming to do so, a TIAGo robot was endowed with backchannelling behaviour generated by combining verbal and non-verbal cues. To evaluate our system, two user studies were carried out, in which the social signal was provided first by a human therapist and later on by a robot. Results indicate that patients were capable of identifying such kind of feedback. Nonetheless, our findings pointed out a significant difference in terms of performance between the two studies. They reveal how patients in the study with the robot overused the feedback to obtain the correct answer, putting in place a cheating mechanism that has led them to significantly worsen their performance. We conclude our work by discussing the implications of our findings when deploying robots in sensitive roles and possible solutions to address such unexpected behaviours., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 801342 (Tecniospring INDUSTRY). This project has also been supported by the European Union’s Horizon 2020 under ERC Advanced Grant CLOTHILDE (no. 741930); by MCIN/AEI/10.13039/501100011033 by the “European Union NextGenerationEU/PRTR” under the project ROB-IN (PLEC2021-007859); by the Research Council of Norway under the project SECUROPS (INT-NO/0875); and by the “European Union NextGenerationEU/PRTR” through CSIC’s Thematic Platforms (PTI+ Neuro-Aging).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibiofilm surfaces based on the immobilization of a novel recombinant antimicrobial multidomain protein using self-assembled monolayers

  • Kyvik Ruiz, Adriana
  • Roca-Pinilla, Ramon
  • Mayolo Deloisa, Karla P.
  • Rodríguez Rodríguez, Xavier
  • Martinez Miguel, Marc 
  • Martos, Marta
  • Köber, Mariana
  • Ventosa, Nora
  • Veciana, Jaume
  • Guasch, Judit
  • Garcia Fruitós, Elena
  • Arís, Anna
  • Ratera, Immaculada
The constant increase of microorganisms resistant to antibiotics has been classified as a global health emergency, which is especially challenging when biofilms are formed. Herein, novel biofunctionalized gold surfaces with the antimicrobial multidomain recombinant protein JAMF1, both in the soluble form and nanostructured as nanoparticles, were developed. The interaction between His-tag termination of the protein and a nitriloacetic acid-Ni complex formed on mixed self-assembled monolayers (mixed SAMs) was exploited. The obtained antibiofilm surfaces based on the immobilization of the novel JAMF1 protein using self-assembled monolayers were characterized using a multi-technique approach including: cyclic voltammetry, X-ray photoelectron spectroscopy, atomic force microscopy and fluorescence, proving that the modification and immobilization of JAMF1 were successfully done. The antibiofilm activity against Escherichia coli and carbapenem-resistant Klebsiella pneumoniae showed that the immobilized antimicrobial proteins were able to reduce biofilm formation of both microorganisms. This strategy opens up new possibilities for controlled biomolecule immobilization for fundamental biological studies and biotechnological applications, at the interface of materials science and molecular biology., This work has been developed under the Biochemistry and Biomedicine and Materials Science Program of Universitat Autònoma de Barcelona (UAB). The characterization has been performed by the ICTS ‘‘NANBIOSIS’’, more specifically by the Biomaterial Processing and Nanostructuring Unit (U6), Unit of CIBER-BBN located at ICMAB-CSIC. Authors are grateful for the financial support received from MICINN (PID2020-115296RA-I00 and PID2019–105622RB-I00), the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN), GenCat (grant 2017-SGR-918, SGR Cat 2021-00438 and CERCA programme), the European Social Fund, and Fundació La Marató de TV3 (Nr. 201812). This project has received funding from the European Union's Horizon 2020 research and innovation program under the HORIZON-RIA project NABIHEAL (GA number 101092269), the Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ; TECSPR19-1-0065). J.G. is grateful to MICINN for a ‘‘Ramón y Cajal’’ fellowship (RYC-2017-22614) as well as to the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck Institute for Medical Research (Heidelberg, Germany). R.R-P received a PhD fellowship from Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya (AGAUR) and E.G-F a post-doctoral fellowship from INIA (DOC-INIA). ICMAB-CSIC acknowledges the support from the Severo Ochoa Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S). Table of contents entry and Fig. 2 were designed with BioRender.com., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Strategies for surface coatings of implantable cardiac medical devices

  • Coronel Meneses, David
  • Sánchez Trasviña, Calef
  • Ratera, Immaculada
  • Mayolo Deloisa, Karla
Cardiac medical devices (CMDs) are required when the patient's cardiac capacity or activity is compromised. To guarantee its correct functionality, the building materials in the development of CMDs must focus on several fundamental properties such as strength, stiffness, rigidity, corrosion resistance, etc. The challenge is more significant because CMDs are generally built with at least one metallic and one polymeric part. However, not only the properties of the materials need to be taken into consideration. The biocompatibility of the materials represents one of the major causes of the success of CMDs in the short and long term. Otherwise, the material will lead to several problems of hemocompatibility (e.g., protein adsorption, platelet aggregation, thrombus formation, bacterial infection, and finally, the rejection of the CMDs). To enhance the hemocompatibility of selected materials, surface modification represents a suitable solution. The surface modification involves the attachment of chemical compounds or bioactive compounds to the surface of the material. These coatings interact with the blood and avoid hemocompatibility and infection issues. This work reviews two main topics: 1) the materials employed in developing CMDs and their key characteristics, and 2) the surface modifications reported in the literature, clinical trials, and those that have reached the market. With the aim of providing to the research community, considerations regarding the choice of materials for CMDs, together with the advantages and disadvantages of the surface modifications and the limitations of the studies performed., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and from the Government of Catalonia’s Agency for Business Competitiveness (ACCIÓ; TECSPR19-1-0065). IR has received funding from European Union’s Horizon 2020 research and innovation program in HORIZON-RIA action (Nabiheal; Grant agreement 101092269); MICINN (Grant agreement PID 2019-105622RBI00); Instituto de Salud Carlos III (ISCIII) through the Networking Research Center on Bioengineering, Biomaterialsand Nanomedicine, CIBER-BBN; the Fundació Marató de TV3 (Nr.201812) and Generalitat de Catalunya (2021 SGR 00438). All figures were designed with BioRender.com., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phosphorous incorporation into palladium tin nanoparticles for the electrocatalytic formate oxidation reaction

  • Montaña-Mora, Guillem
  • Qi, Xueqiang
  • Wang, Xiang
  • Chacón-Borrero, Jesús
  • Martínez-Alanis, Paulina R.
  • Yu, Xiaoting
  • Li, Junshan
  • Xue, Qian
  • Arbiol, Jordi
  • Ibáñez, María
  • Cabot, Andreu
The deployment of direct formate fuel cells (DFFCs) relies on the development of active and stable catalysts for the formate oxidation reaction (FOR). Palladium, providing effective full oxidation of formate to CO2, has been widely used as FOR catalyst, but it suffers from low stability, moderate activity, and high cost. Herein, we detail a colloidal synthesis route for the incorporation of P on Pd2Sn nanoparticles. These nanoparticles are dispersed on carbon black and the obtained composite is used as electrocatalytic material for the FOR. The Pd2Sn0.8P-based electrodes present outstanding catalytic activities with record mass current densities up to 10.0 A mgPd-1, well above those of Pd1.6Sn/C reference electrode. These high current densities are further enhanced by increasing the temperature from 25 °C to 40 °C. The Pd2Sn0.8P electrode also allows for slowing down the rapid current decay that generally happens during operation and can be rapidly re-activated through potential cycling. The excellent catalytic performance obtained is rationalized using density functional theory (DFT) calculations., This work was carried out within the framework of the project Combenergy, PID2019-105490RB-C32, financed by the Spanish MCIN/AEI/10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Programme from the Generalitat de Catalunya. Part of the present work has been performed in the frameworks of the Universitat de Barcelona Nanoscience PhD program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the European Union. The project on which these results are based has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). J. Li is grateful for the project supported by the Natural Science Foundation of Sichuan (2022NSFSC1229). M.I. acknowledges funding by ISTA and the Werner Siemens Foundation., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Soft Optomechanical Systems for Sensing, Modulation, and Actuation

  • Pujol-Vila, Ferrán
  • Güell-Grau, Pau
  • Nogués, Josep
  • Álvarez, Mar
  • Sepúlveda, Borja
Soft optomechanical systems have the ability to reversibly respond to optical and mechanical external stimuli by changing their own properties (e.g., shape, size, viscosity, stiffness, color or transmittance). These systems typically combine the optical properties of plasmonic, dielectric or carbon-based nanomaterials with the high elasticity and deformability of soft polymers, thus opening the path for the development of new mechanically tunable optical systems, sensors, and actuators for a wide range of applications. This review focuses on the recent progresses in soft optomechanical systems, which are here classified according to their applications and mechanisms of optomechanical response. The first part summarizes the soft optomechanical systems for mechanical sensing and optical modulation based on the variation of their optical response under external mechanical stimuli, thereby inducing mechanochromic or intensity modulation effects. The second part describes the soft optomechanical systems for the development of light induced mechanical actuators based on different actuation mechanisms, such as photothermal effects and phase transitions, among others. The final section provides a critical analysis of the main limitations of current soft optomechanical systems and the progress that is required for future devices., The authors acknowledge the financial support from grant nos. MAT2016-77391-R, PID2019-106229RB-I00, and PCIN2016-093 (M-ERA-NET) funded by MCIN/AEI/10.13039/501100011033, and grant nos. RTI2018-096786-B-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. The funding from Generalitat de Catalunya through the 2017-SGR-292 project is also acknowledged. ICN2 was funded by the CERCA programme/Generalitat de Catalunya. The ICN2 was supported by the SEV-2017-0706 grant funded by MCIN/AEI/10.13039/501100011033. F.P.-V. acknowledge funding from the European Union's Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement no. 801342 (Tecniopring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ) (TECSPR19-1-0021)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Social robot-delivered customer-facing services: an assessment of the experience, 由社交机器人提供的面向客户的服务:对体验的分析

  • Forgas Coll, Santiago
  • Huertas García, Rubén
  • Andriella, Antonio
  • Alenyà, Guillem
The ability to install social intelligence protocols in robots in order for them to exhibit conversational skills has made them ideal tools for delivering services with a high cognitive and low emotional load. Little is known about how this capability influences the customer experience and the intention to continue receiving these services. Experiences were assessed in a study simulating customer-facing service delivery, and the constructs of the technology readiness index and stated gender were analysed as possible moderators in a quasi-experiment. Hedonic quality was the most relevant factor explaining attitude, and attitude explained intention to use as well as social influence. As for the constructs of technological readiness and gender, optimism and innovativeness seem to be the most likely candidates for moderating the other variables. The most optimistic and the most innovative route would be for the main actors to continue adapting to social robot technology in the future., This work was partially funded by the European Union’s Horizon 2020 under ERC Advanced Grant CLOTHILDE (no. 741930); by MCIN/AEI/10.13039/501100011033 and by the ‘European Union NextGenerationEU/PRTR’ under the project ROB-IN (PLEC2021-007859); by the Research Council of Norway under the project SECUROPS (INT-NO/0875); and by the ‘European Union NextGenerationEU/PRTR’ through CSIC’s Thematic Platforms (PTI + Neuro-Aging); A. Andriella was supported by the European Union’s Horizon 2020 research and innovation programme PRO-CARED (no.801342) under Marie Skłodowska-Curie grant agreement (Tecniospring INDUSTRY) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIÓ)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible and Binder-Free Iron Phosphide Electrodes Using a Three-Dimensional Support for High Hydrogen Productivity

  • Díez-García, María Isabel
  • García Blanco, Andrés Alberto
  • Murcia-López, Sebastián
  • Botifoll, Marc
  • Arbiol, Jordi
  • Qamar, Mohammad
  • Morante, Joan Ramón
In this work, an inexpensive and reliable microstructured electrode for the hydrogen evolution reaction (HER) is developed. This cathode is made of Earth-abundant elements consisting of iron phosphide as an electrocatalyst and carbon felt (CF) as a flexible conductive scaffold. Its porous character and binder-free FeP coverage over the carbon fibers generate a high number of accessible active sites for the reaction, achieving a high value of the electrochemically active surface area. The electrode reaches 100 mA ⋅ cm−2 by applying only −53 mV vs RHE at 50 °C in 0.5 M H2SO4, demonstrating excellent electrocatalytic activity for the HER and outstanding stability in acidic electrolyte. Furthermore, the feasibility of these electrodes for industrial application is evaluated using a PEM electrolyzer. The developed prototype with a cathodic area of 1.8 cm2 shows a very promising performance, reaching 14.9 mmol H2 ⋅ h−1 ⋅ cm−2 (corresponding to 800 mA ⋅ cm−2) at a voltage of only 2.1 V., M.I. acknowledges the support from Ministerio de Ciencia e Innovación in Spain through Juan de la Cierva fellowship (FJC2018-036229-I). The authors extend their overall appreciation to the Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia for funding this research work through the project number DRI 598. The project on which these results are based has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). ICN2 and IREC acknowledge funding from Generalitat de Catalunya 2021 SGR 00457 and 2021 SGR 01581, respectively. The authors thank support from the projects NANOGEN (PID2020-116093RB−C43) and CERES (PID2020-116093RB−C42) funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR−C17.I1) and Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). ICN2 and IREC are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. M.B. acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref. 2020 FI 00103., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-supported NiO/CuO electrodes to boost urea oxidation in direct urea fuel cells

  • Yang, Linlin
  • He, Ren
  • Wang, Xiang
  • Yang, Tingting
  • Zhang, Ting
  • Zuo, Yong
  • Lu, Xuan
  • Liang, Zhifu
  • Li, Junshan
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Qi, Xueqiang
  • Cabot, Andreu
Direct urea fuel cells (DUFCs) can be used to treat residual wastewater while generating electricity. Herein, self-supported electrodes consisting of NiO nanosheets vertically grown on CuO nanowires are synthesized to realize the urea oxidation reaction (UOR). Such electrodes show excellent UOR performance requiring 1.39 V vs. RHE to achieve 100 mA/cm2. Besides, DUFCs provide open circuit voltages and power densities up to 0.88 V and 11.35 mW/cm2. Electrochemical characterization and Raman spectroscopy prove the formation of NiOOH to enable the UOR. Mott-Schottky analysis and UV photoelectron spectroscopy show the NiO/CuO p-p heterostructure to facilitate the charge transfer from CuO nanowires to NiO nanosheets. Besides, at a local level, density functional theory calculations show that the presence of CuO modulates the electronic states of Ni at the very NiOOH/CuO interface, which results in stretched Ni-O bonds and a uniquely elongated N-H bond of urea that favors its oxidation., The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581, 2021 SGR 00457 and the project COMBENERGY, PID2019-105490RB-C32, from the Spanish Ministerio de Ciencia e Innovación. The project on which these results are based has received funding from the European Union's Horizon 2020 Research and Innovation Program under Marie Skłodowska-Curie Grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Programme from the Generalitat de Catalunya. This study is part of the Advanced Materials Programme and is supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17. I1) and Generalitat de Catalunya. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Part of the present work has been performed in the frameworks of Universitat de Barcelona Nanoscience PhD Program. L. L.Yang, X. Wang and X. Lu thank the China Scholarship Council (CSC) for the scholarship support. Z. Liang acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). J. Li is grateful for the Natural Science Foundation of Sichuan Project (2022NSFSC1229)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The LightDock Server: Artificial Intelligence-powered modeling of macromolecular interactions

  • Jiménez-García, Brian
  • Roel-Touris, Jorge
  • Barradas-Bautista, Didier
Computational docking is an instrumental method of the structural biology toolbox. Specifically, integrative modeling software, such as LightDock, arise as complementary and synergetic methods to experimental structural biology techniques. Ubiquitousness and accessibility are fundamental features to promote ease of use and to improve user experience. With this goal in mind, we have developed the LightDock Server, a web server for the integrative modeling of macromolecular interactions, along with several dedicated usage modes. The server builds upon the LightDock macromolecular docking framework, which has proved useful for modeling medium-to-high flexible complexes, antibody-antigen interactions, or membrane-associated protein assemblies. We believe that this free-to-use resource will be a valuable addition to the structural biology community and can be accessed online at: https://server.lightdock.org/, J.R.T. acknowledges funding from the European Molecular Biology Organization (EMBO) [ALTF 145-2021]; B.J.G. is employed by Zymvol Biomodeling by a project which received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie [801342] (Tecniospring INDUSTRY); Government of Catalonia's Agency for Business Competitiveness (ACCIÓ); D.B.B. was supported by funding from the AI Initiative at KAUST. Funding for open access charge: European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie [801342] (Tecniospring INDUSTRY); Government of Catalonia's Agency for Business Competitiveness (ACCIÓ)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Discriminating physiological from non-physiological interfaces in structures of protein complexes: A community-wide study

  • Schweke, Hugo
  • Xu, Qifang
  • Tauriello, Gerardo
  • Pantolini, Lorenzo
  • Schwede, Torsten
  • Cazals, Frédéric
  • Lhéritier, Alix
  • Fernández-Recio, Juan
  • Rodríguez-Lumbreras, Luis A.
  • Schueler-Furman, Ora
  • Varga, Julia K.
  • Jiménez-García, Brian
  • Réau, Manon F.
  • Bonvin, Alexandre M. J. J.
  • Savojardo, Castrense
  • Martelli, Pier-Luigi
  • Casadio, Rita
  • Tubiana, Jérôme
  • Wolfson, Haim J.
  • Oliva, Romina
  • Barradas-Bautista, Didier
  • Ricciardelli, Tiziana
  • Cavallo, Luigi
  • Venclovas, Česlovas
  • Olechnovič, Kliment
  • Guerois, Raphael
  • Andreani, Jessica
  • Martin, Juliette
  • Wang, Xiao
  • Terashi, Genki
  • Sarkar, Daipayan
  • Christoffer, Charles
  • Aderinwale, Tunde
  • Verburgt, Jacob
  • Kihara, Daisuke
  • Marchand, Anthony
  • Correia, Bruno E.
  • Duan, Rui
  • Qiu, Liming
  • Xu, Xianjin
  • Zhang, Shuang
  • Zou, Xiaoqin
  • Dey, Sucharita
  • Dunbrack, Roland L.
  • Levy, Emmanuel D.
  • Wodak, Shoshana J.
Reliably scoring and ranking candidate models of protein complexes and assigning their oligomeric state from the structure of the crystal lattice represent outstanding challenges. A community-wide effort was launched to tackle these challenges. The latest resources on protein complexes and interfaces were exploited to derive a benchmark dataset consisting of 1677 homodimer protein crystal structures, including a balanced mix of physiological and non-physiological complexes. The non-physiological complexes in the benchmark were selected to bury a similar or larger interface area than their physiological counterparts, making it more difficult for scoring functions to differentiate between them. Next, 252 functions for scoring protein-protein interfaces previously developed by 13 groups were collected and evaluated for their ability to discriminate between physiological and non-physiological complexes. A simple consensus score generated using the best performing score of each of the 13 groups, and a cross-validated Random Forest (RF) classifier were created. Both approaches showed excellent performance, with an area under the Receiver Operating Characteristic (ROC) curve of 0.93 and 0.94, respectively, outperforming individual scores developed by different groups. Additionally, AlphaFold2 engines recalled the physiological dimers with significantly higher accuracy than the non-physiological set, lending support to the reliability of our benchmark dataset annotations. Optimizing the combined power of interface scoring functions and evaluating it on challenging benchmark datasets appears to be a promising strategy., This study (SJW coordinator) was performed as part of the Implementation Plan (2019-2021) of Activity-2 of the 3DBioInfo Elixir Community (https://elixir-europe.org/communities/3d-bioinfo). We thank Alexander Botzki (VIB Technology Training, Flanders, Belgium) for helping with installing and hosting the project GitHub. G.T., L.P., and T.S. acknowledge the contributions of Gabriel Studer in setting up the AlphaFold pipeline for our analysis, sciCORE at the University of Basel for providing computational resources and system administration support, and funding from the SIB Swiss Institute of Bioinformatics and the Biozentrum PhD Fellowships. D.K. acknowledges supports by the National Institutes of Health (R01GM133840) and the National Science Foundation (DMS2151678, DBI2003635, CMMI1825941, MCB2146026, and MCB1925643). X.W. is recipient of the MolSSI graduate fellowship. A.M.J.J.B. and M.R. acknowledge financial support from the Netherlands eScience Center (ASDI.2016.043), from the Netherlands Organization for Scientific Research (NWO) (TOP-PUNT grant 718.015.001) and from the European Union Horizon 2020 project BioExcel (823830). J.F.-R. acknowledges support by Spanish Ministry of Science (grant PID2019-110167RB-I00 / AEI / 10.13039/501100011033). B. J.-G. is employed by Zymvol Biomodeling on a project which received funding from the European Union's Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). X.Z. acknowledges the support from NIH/NIGMS (grant R35GM136409). E.D.L. acknowledges support from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No. 819318), by a research grant from A.-M. Boucher, by research grants from the Estelle Funk Foundation, the Estate of Fannie Sherr, the Estate of Albert Delighter, the Merle S. Cahn Foundation, Mrs Mildred S. Gosden, the Estate of Elizabeth Wachsman, the Arnold Bortman Family Foundation. S.D acknowledges Ramalingaswami re-entry Fellowship (March 30th, 2021) from DBT India.O. S_F acknowledges support from the Israel Science Foundation, founded by the Israel Academy of Science and Humanities (grant number 301/2021.J.K.V. is supported by Marie Sklodowska-Curie European Training Network Grant #860517., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of AlphaFold on structure prediction of protein complexes: The CASP15-CAPRI experiment

  • Lensink, Marc F.
  • Brysbaert, Guillaume
  • Raouraoua, Nessim
  • Bates, Paul A.
  • Giulini, Marco
  • Honorato, Rodrigo V.
  • van Noort, Charlotte
  • Teixeira, Joao M. C.
  • Bonvin, Alexandre M. J. J.
  • Kong, Ren
  • Shi, Hang
  • Zhu, Shaowen
  • Yin, Rujie
  • Sun, Yuanfei
  • Shen, Yang
  • Maszota-Zieleniak, Martyna
  • Bojarski, Krzysztof K.
  • Lubecka, Emilia A.
  • Marcisz, Mateusz
  • Danielsson, Annemarie
  • Dziadek, Lukasz
  • Samsonov, Sergey A.
  • Gaardlos, Margrethe
  • Gieldon, Artur
  • Liwo, Adam
  • Slusarz, Rafal
  • Zieba, Karolina
  • Sieradzan, Adam K.
  • Czaplewski, Cezary
  • Kobayashi, Shinpei
  • Miyakawa, Yuta
  • Kiyota, Yasuomi
  • Takeda-Shitaka, Mayuko
  • Olechnovic, Kliment
  • Wallner, Bjorn
  • Valancauskas, Lukas
  • Dapkunas, Justas
  • Venclovas, Ceslovas
  • Yang, Lin
  • Hou, Chengyu
  • He, Xiaodong
  • Guo, Shuai
  • Jiang, Shenda
  • Ma, Xiaoliang
  • Duan, Rui
  • Qui, Liming
  • Xu, Xianjin
  • Lu, Xufeng
  • Zou, Xiaoqin
  • Velankar, Sameer
  • Wodak, Shoshana J.
  • Chang, Shan
  • Liu, Jian
  • Guo, Zhiye
  • Chen, Xiao
  • Morehead, Alex
  • Roy, Raj S.
  • Wu, Tianqi
  • Giri, Nabin
  • Quadir, Farhan
  • Chen, Chen
  • Cheng, Jianlin
  • Del Carpio, Carlos A.
  • Ichiishi, Eichiro
  • Rodríguez-Lumbreras, Luis A.
  • Fernández-Recio, Juan
  • Harmalkar, Ameya
  • Chu, Lee-Shin
  • Canner, Sam
  • Smanta, Rituparna
  • Gray, Jeffrey J.
  • Li, Hao
  • Lin, Peicong
  • He, Jiahua
  • Tao, Huanyu
  • Huang, Sheng-You
  • Roel-Touris, Jorge
  • Jiménez-García, Brian
  • Christoffer, Charles W.
  • Jain, Anika J.
  • Kagaya, Yuki
  • Kannan, Harini
  • Nakamura, Tsukasa
  • Terashi, Genki
  • Verburgt, Jacob C.
  • Zhang, Yuanyuan
  • Zhang, Zicong
  • Fujuta, Hayato
  • Sekijima, Masakazu
  • Kihara, Daisuke
  • Khan, Omeir
  • Kotelnikov, Sergei
  • Ghani, Usman
  • Padhorny, Dzmitry
  • Beglov, Dmitri
  • Vajda, Sandor
  • Kozakov, Dima
  • Negi, Surendra S.
  • Ricciardelli, Tiziana
  • Barradas-Bautista, Didier
  • Cao, Zhen
  • Chawla, Mohit
  • Cavallo, Luigi
  • Oliva, Romina
  • Yin, Rui
  • Cheung, Melyssa
  • Guest, Johnathan D.
  • Lee, Jessica
  • Pierce, Brian G.
  • Shor, Ben
  • Cohen, Tomer
  • Halfon, Matan
  • Schneidman-Duhovny, Dina
We present the results for CAPRI Round 54, the 5th joint CASP-CAPRI protein assembly prediction challenge. The Round offered 37 targets, including 14 homodimers, 3 homo-trimers, 13 heterodimers including 3 antibody-antigen complexes, and 7 large assemblies. On average ~70 CASP and CAPRI predictor groups, including more than 20 automatics servers, submitted models for each target. A total of 21 941 models submitted by these groups and by 15 CAPRI scorer groups were evaluated using the CAPRI model quality measures and the DockQ score consolidating these measures. The prediction performance was quantified by a weighted score based on the number of models of acceptable quality or higher submitted by each group among their five best models. Results show substantial progress achieved across a significant fraction of the 60+ participating groups. High-quality models were produced for about 40% of the targets compared to 8% two years earlier. This remarkable improvement is due to the wide use of the AlphaFold2 and AlphaFold2-Multimer software and the confidence metrics they provide. Notably, expanded sampling of candidate solutions by manipulating these deep learning inference engines, enriching multiple sequence alignments, or integration of advanced modeling tools, enabled top performing groups to exceed the performance of a standard AlphaFold2-Multimer version used as a yard stick. This notwithstanding, performance remained poor for complexes with antibodies and nanobodies, where evolutionary relationships between the binding partners are lacking, and for complexes featuring conformational flexibility, clearly indicating that the prediction of protein complexes remains a challenging problem., Paul A. Bates: This work was supported by the Francis Crick Institute, which receives its core funding from Cancer Research UK (FC0001003), the UK Medical Research Council (FC001003), and the Wellcome Trust (FC001003). Alexandre M. J. J. Bonvin: Financial support from the European Union Horizon 2020, project BioExcel (823830) and from the Netherlands e-Science Center, project IVRESSE (027.020.G13) is acknowledged. Jianlin Cheng: This work was partially supported by US National Science Foundation (grant #: DBI1759934 and IIS1763246), and US National Institutes of Health (grant #: R01GM093123 and R01GM146340). Juan Fernandez-Recio: Spanish Ministry of Science (grant PID2019-110167RB-I00/AEI/10.13039/501100011033). Jeffrey J. Gray: This work was supported by National Institute of Health grant R35-GM141881. Computational resources were provided by the Advanced Research Computing at Hopkins (ARCH) core facility, supported by the National Science Foundation (NSF) grant number OAC1920103. Sheng-You Huang: This work was supported by the National Natural Science Foundation of China to Sheng-You Huang (Grant No: 62072199 and 32161133002). Brian Jimenez-Garcia: Jorge Roel-Touris acknowledges funding from the European Molecular Biology Organization (EMBO) [ALTF 145-2021]; Brian Jimenez-Garcia is employed by Zymvol Biomodeling on a project which received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIO). Daisuke Kihara: We are grateful for ITaP Research Computing at Purdue University for providing us additional computational resources for this project. This work is partially supported by the National Institutes of Health (R01GM133840, R01GM123055), the National Science Foundation (CMMI1825941, MCB1925643, DBI2146026, IIS2211598, and DBI2003635). Cezary Czaplewski and Jacob C. Verburgt were supported by a National Institute of General Medical Sciences-funded predoctoral fellowship to Cezary Czaplewski and Jacob C. Verburgt (T32 GM132024). Kozakov/Vajda: DMS 2054251 from the National Science Foundation, and R01GM140098, R35GM118078, RM1135136 from the National Institute of Health. Romina Oliva: This research was funded by the KAUST baseline research funding (to Luigi Cavallo) and by MIUR-FFABR “Fondoper il Finanziamento Attivita Base di Ricerca” (to Romina Oliva). Brian G. Pierce: This work was supported by NIH R35 GM144083 (to Brian G. Pierce). Yang Shen: This study was supported by NIH/NIGMS (R35GM124952 to Yang Shen) and NSF (CCF-1943008 to Yang Shen). Portions of this research were conducted with the advanced computing resources provided by Texas A&M High Performance Research Computing. Adam K. Sieradzan: Supported by National Science Center of Poland (Narodowe Centrum Nauki) (NCN), grants UMO2017/25/B/ST4/01026, UMO-2017/26/M/ST4/00044, and UMO-2017/27/B/ST4/00926. Computational resources were provided by (a) the Interdisciplinary Centre of Mathematical and Computational Modelling (ICM) at the University of Warsaw (b) the Centre of Informatics—Tricity Academic Superkomputer & NetworK (CI TASK) in Gdansk, (c) the Polish Grid Infrastructure (PL-GRID), and (d) our Beowulf cluster at the Faculty of Chemistry, University of Gdansk. Ceslovas Venclovas: Research Council of Lithuania (grant S-MIP-21-25). Bjorn Wallner: Wallenberg AI, Autonomous System and Software Program (WASP) and Berzelius from Knut and Alice Wallenberg Foundation (KAW), Swedish Research Council, 2020-03352, The Swedish e-Science Research Center, and Carl Tryggers stiftelse for Vetenskaplig Forskning, 20:453. Lin Yang: The authors acknowledge the financial support from the Science Foundation of the National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, the Fundamental Research Funds for the Central Universities of China. Xiaoqin Zou: This was supported by NIH/NIGMS R35GM136409 to Xiaoqin Zou., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gendered Human–Robot Interactions in Services

  • Forgas Coll, Santiago
  • Huertas García, Rubén
  • Andriella, Antonio
  • Alenyà, Guillem
The outbreak of Covid-19 precipitated the use of service robots in customer-facing services as a replacement for employees to avoid human-to-human contact. However, this development has not resolved the debate as to whether robots should be characterized with gender attributes or simply be genderless. This study explores whether endowing a robot with gender attributes makes it more acceptable as a service provider among stated men and women. To this end, an experiment was conducted at a public fair in which a gendered robot simulated the provision of a service to customers, which consisted of offering them advice, hints, and messages of encouragement to help complete a eudaemonic puzzle. A parsimonious version of the Almere model was used to estimate acceptance of the technology. The findings reveal that for both stated men and women, the main drivers for accepting the female-coded robot are perceived usefulness and social influence, although women attach greater importance to social influence. For the male-coded robot, perceived usefulness and social influence are the main arguments for women, while for men they are enjoyment, perceived usefulness and, negatively, ease of use. In addition, different indirect effects between stated sexes are also identified. In summary, men and women consider different factors when accepting robots of each gender., This work was partially funded by the European Union’s Horizon 2020 programme under ERC Advanced Grant CLOTHILDE (no. 741930); and by the European Union’s Horizon 2020 research and innovation programme under the Marie Sk?odowska-Curie grant agreement No 801342 (Tecniospring INDUSTRY); by MCIN/ AEI /https://doi.org/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” under the project ROB-IN (PLEC2021-007859); by the Research Council of Norway under the project SECUROPS (INT-NO/0875); and by the “European Union NextGenerationEU/PRTR” through CSIC’s Thematic Platforms (PTI + Neuro-Aging). Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correction to: Gendered Human–Robot Interactions in Services (International Journal of Social Robotics, (2023), 15, 11, (1791-1807), 10.1007/s12369-023-01035-8)

  • Forgas Coll, Santiago
  • Huertas García, Rubén
  • Andriella, Antonio
  • Alenyà, Guillem
This paper was inadvertently published with incorrect funding information. Please find the incorrect and correct versions below. Springer wishes to apologize for any inconvenience caused. Incorrect funding information: This work was partially funded by the European Union’s Horizon 2020 programme under ERC Advanced Grant CLOTHILDE (no. 741,930) and under the Marie Skłodowska-Curie grant agreement (no. 712,949) (TECNIOspring PLUS); by MCIN/ AEI /https://doi.org/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” under the project ROB-IN (PLEC2021-007859); by the Research Council of Norway under the project SECUROPS (INT-NO/0875); and by the “European Union NextGenerationEU/PRTR” through CSIC’s Thematic Platforms (PTI + Neuro-Aging). Correct funding information: This work was partially funded by the European Union’s Horizon 2020 programme under ERC Advanced Grant CLOTHILDE (no. 741,930); and by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 801,342 (Tecniospring INDUSTRY); by MCIN/ AEI /https://doi.org/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” under the project ROB-IN (PLEC2021-007859); by the Research Council of Norway under the project SECUROPS (INT-NO/0875); and by the “European Union NextGenerationEU/PRTR” through CSIC’s Thematic Platforms (PTI + Neuro-Aging)., This work was partially funded by the European Union’s Horizon 2020 programme under ERC Advanced Grant CLOTHILDE (no. 741,930); and by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 801,342 (Tecniospring INDUSTRY); by MCIN/ AEI /https://doi.org/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” under the project ROB-IN (PLEC2021-007859); by the Research Council of Norway under the project SECUROPS (INT-NO/0875); and by the “European Union NextGenerationEU/PRTR” through CSIC’s Thematic Platforms (PTI + Neuro-Aging)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Soft Optomechanical Devices Featuring Intrinsic Redox Activity

  • Pujol-Vila, Ferran
  • Álvarez, Mar
Presented at the XXXV EUROSENSORS Conference, Lecce, Italy, 10–13 September 2023.-- © 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., Soft optomechanical sensors have the ability to combine the high tunability and elasticity of soft polymers with the distinctive optical properties of photonic structures, thus offering unprecedented opportunities for the development high-performance colorimetric sensors. Herein, we demonstrate for the first time the use of optomechanical devices made of off-stoichiometry thiol-ene (OSTE), a polymeric material that features intrinsic redox activity, overcoming some limitations of conventional materials (e.g., polydimethylsiloxane or silicon). Remarkably, this work provides the foundation for a new generation of highly tunable and versatile optomechanical sensors, enabling unexplored functionalities., This research was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 801342 (Tecniospring INDUSTRY) and the Governemnt of Catalonia’s Agency for Business Competitiveness (ACCIÓ) (TECSPR19-1-0021)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced electrochemical hydrogenation of benzaldehyde to benzyl alcohol on Pd@Ni-MOF by modifying the adsorption configuration

  • Gong, Li
  • Zhang, Chao Yue
  • Li, Junshan
  • Montaña-Mora, Guillem
  • Botifoll, Marc
  • Guo, Tiezhu
  • Arbiol, Jordi
  • Zhou, Jin Yuan
  • Kallio, Tanja
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
Electrocatalytic hydrogenation (ECH) approaches under ambient temperature and pressure offer significant potential advantages over thermal hydrogenation processes but require highly active and efficient hydrogenation electrocatalysts. The performance of such hydrogenation electrocatalysts strongly depends not only on the active phase but also on the architecture and surface chemistry of the support material. Herein, Pd nanoparticles supported on a nickel metal-organic framework (MOF), Ni-MOF-74, are prepared, and their activity toward the ECH of benzaldehyde (BZH) in a 3 M acetate (pH 5.2) aqueous electrolyte is explored. An outstanding ECH rate up to 283 μmol cm-2 h-1 with a Faradaic efficiency (FE) of 76% is reached. Besides, higher FEs of up to 96% are achieved using a step-function voltage. Materials Studio and density functional theory calculations show these outstanding performances to be associated with the Ni-MOF support that promotes H-bond formation, facilitates water desorption, and induces favorable tilted BZH adsorption on the surface of the Pd nanoparticles. In this configuration, BZH is bonded to the Pd surface by the carbonyl group rather than through the aromatic ring, thus reducing the energy barriers of the elemental reaction steps and increasing the overall reaction efficiency., L.G. and C.Y.Z. thank the China Scholarship Council for the scholarship support. This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). This work was supported by the Innovation Fund for Small and Medium-Sized Enterprises in Gansu Province (no. 22CX3JA006) and Lanzhou Talent Innovation and Entrepreneurship Project (no. 2022-2-81) and partially by the Fundamental Research Funds for the Central Universities (grant nos. lzujbky-2021-it33). The authors greatly acknowledge the support of the Supercomputing Center of Lanzhou University, China. J.L. is grateful for the project supported by the Natural Science Foundation of Sichuan Province (2022NSFSC1229). The authors also greatly thank for the generous help from Liming Deng and Professor Dr. Shengjie Peng (College of Materials Science and Technology Nanjing University of Aeronautics and Astronautics Nanjing 210016, China). The project on which these results are based has received funding from the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement no. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIÓ). The authors acknowledge funding from Generalitat de Catalunya 2021SGR00457 and 2021SGR01581. ICN2 acknowledges funding from project PID2020-116093RB-C43, funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (grant no. CEX2021-001214-S). ICN2 and IREC are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autónoma de Barcelona Materials Science PhD program. M.B. acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref 2020 FI 00103., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Semiconductor nanosheets for electrocatalytic self-coupling of benzaldehyde to hydrobenzoin

  • Gong, Li
  • Zhang, Chao Yue
  • Mu, Xiao
  • Han, Xu
  • Li, Junshan
  • Arbiol, Jordi
  • Zhou, Jin Yuan
  • Kallio, Tanja
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The electrochemical reduction of biomass-derived feedstocks provides a sustainable platform for the synthesis of a wide range of chemical commodities and biofuels. Despite their interest, the optimization of reaction conditions, the screening of electrode materials, and the mechanistic understanding of these processes lag well behind other chemical routes. Here, we focus on the electrochemical self-coupling of benzaldehyde (BZH) to hydrobenzoin (HDB) using semiconductor electrocatalysts with nanosheet morphologies. By testing several semiconductor materials, a correlation is observed between their band gap and the electrochemical potential necessary to maximize selectivity towards HDB in alkaline medium, which we associate with the charge accumulation at the semiconductor surface. N-type CuInS2 provides the highest conversion rate at 0.3 mmol cm−2h−1 with a selectivity of 98.5 % at −1.3 V vs. Hg/HgO. Additional density functional theory calculations demonstrate a lower kinetic energy barrier at the CuInS2 surface compared with graphitic carbon, proving its catalytic role in the self-coupling reaction of BZH., L. Gong and C.Y. Zhang thank the China Scholarship Council for the scholarship support. The authors greatly acknowledge the computational simulation support from the Supercomputing Center of Lanzhou University, China. J. Li is grateful for the project funded by the Natural Science Foundation of Sichuan Province (No. 2022NSFSC1229) and the China Postdoctoral Science Foundation (No.2023MD734228). The project on which these results are based has received funding from the European Union's Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIO). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. This research is part of the CSIC program for the Spanish Recovery, Transformation, and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN /AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoswitchable positive allosteric modulators of metabotropic glutamate receptor 4 to improve selectivity

  • Panarello, Silvia
  • González-Díez, Aleix
  • Berizzi, Alice E.
  • Malhaire, Fanny
  • Borràs-Tudurí, Roser
  • Rovira, Xavier
  • Serra, Carme
  • Prézeau, Laurent
  • Pin, Jean Philippe
  • Goudet, Cyril
  • Llebaria, Amadeu
  • Gómez-Santacana, Xavier
Metabotropic glutamate receptors (mGlu) regulate multiple functions in the nervous systems and are involved in several neurological disorders. However, selectively targeting individual mGlu subtypes with spatiotemporal precision is still an unmet need. Photopharmacology can address this concern through the utilization of photoswitchable compounds such as optogluram, which is a positive allosteric modulator (PAM) of mGlu4 that enables the precise control of physiological responses using light but does not have an optimal selectivity profile. Optogluram analogs were developed to obtain photoswitchable PAMs of mGlu4 receptor with an improved selectivity. Among them, optogluram-2 emerged as a photoswitchable ligand for mGlu4 receptor with activity as both PAM and allosteric agonists. It presents a higher selectivity and offers improved photoswitching of mGlu4 activity. These improved properties make optogluram-2 an excellent candidate to study the role of mGlu4 with a high spatiotemporal precision in systems where mGlu4 can be co-expressed with other mGlu receptors., We thank Lourdes Muñoz from SIMChem (IQAC-CSIC) for the use of analytical support and helpful discussions, ARPEGE Pharmacology-Screening-Interactome platform facility (UMS Bio-campus, Montpellier, France) for the use of the plate readers, Revvity (former PerkinElmer-Cisbio) for providing HTRF cAMP and IPOne kits in the frame of EIDOS collaborative laboratory, and H. Gutierrez-de-Teran for computational support. The results included in this standard have received funding from the European Union’s Horizon 2020 research and innovation program under Marie Skłodowska-Curie grant agreement no. 801342 (Tecniospring INDUSTRY, TECSPR19-1-0062) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIÓ) to X.G.-S., Agence Nationale de la Recherche (ANR-17-CE11-0046) to J.-P.P., Labex EpiGenMed (ANR-10-LABX-12-01) to J.-P.P., Fondation pour la Recherche Médicale (FRM DEQ20170336747) to J.-P.P., from the NEURON Research Program which is jointly funded by national funding authorities within the framework of the ERA-NET Neuron (ANR-17-NEU3–0001) to C.G. and A.L., the CNRS International Scientific Collaboration Program (PICS 08212) to C.G., A.L., and X.R., Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, and ERDF - A way of making Europe (CTQ2017-89222-R, PCI2018-093047, PID2020-120499RB-I00, and PIE-RYC2020--029485-I) to A.L. and X.R., by the Agència de Gestió d'Ajuts Universitaris i de Recerca (2021 SGR 00508) to A.L. and by the Spanish National Research Council (20228AT014) to X.R. We thank the European Research Network on Signal Transduction (ERNEST Cost Action 18133) and the International Research Network on GPCRs (iGPCRnet) to finance the diffusion of our research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the Light Detection in an Integrated Novel Electrophotonic Wavesensor Photodetector

  • Hernández-Betanzos, Joaquín
  • Aceves-Mijares, Mariano
  • González-Fernández, Alfredo Abelardo
This work presents a novel integrable silicon photodetector which can only be conceived as part of a monolithic electrophotonic basic structure formed of a silicon light emitter, waveguide and light detector. That is, it cannot operate as a single electronic or photonic device. The detector presents current gain, and photons reach the depletion region straightforward, allowing the detection of low power light produced by silicon light sources currently in use, which is difficult for existing photodetectors. The waveguide core is made of silicon nitride, and it is simultaneously the insulator in a MOS-like device. The light detection unit is intended for novel seamless electrophotonic platforms, and it is called wavesensor. In spite that the device is a MOS-like structure, it is not a MOSFET neither a lateral bipolar transistor, and one of the main differences with the former is that this is a bulk device working in Punch-Through regime. Being a MOS-like structure, it is fully compatible with standard microelectronics technology. A development of the mathematics involved in its operation is carried out in order to understand the physics of the detector, showing a gain factor in the photocurrent. Computer simulations of the fabrication process and photoelectric response of the device confirmed photocurrent values higher than the expected for a photodiode with efficiency = 1, thus demonstrating a new integrable photodetector with gain, capable of detecting light in the range of nW for electrophotonic applications., Funding: This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No 801342 (Tecniospring INDUSTRY). Funding text 2 Acknowledgments: The authors acknowledge the support from CONACyT of Mexico., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Bayesian framework for learning proactive robot behaviour in assistive tasks

  • Andriella, Antonio
  • Cucciniello, Ilenia
  • Origlia, Antonio
  • Rossi, Silvia
Socially assistive robots represent a promising tool in assistive contexts for improving people’s quality of life and well-being through social, emotional, cognitive, and physical support. However, the effectiveness of interactions heavily relies on the robots’ ability to adapt to the needs of the assisted individuals and to offer support proactively, before it is explicitly requested. Previous work has primarily focused on defining the actions the robot should perform, rather than considering when to act and how confident it should be in a given situation. To address this gap, this paper introduces a new data-driven framework that involves a learning pipeline, consisting of two phases, with the ultimate goal of training an algorithm based on Influence Diagrams. The proposed assistance scenario involves a sequential memory game, where the robot autonomously learns what assistance to provide when to intervene, and with what confidence to take control. The results from a user study showed that the proactive behaviour of the robot had a positive impact on the users’ game performance. Users obtained higher scores, made fewer mistakes, and requested less assistance from the robot. The study also highlighted the robot’s ability to provide assistance tailored to users’ specific needs and anticipate their requests., This work was partially funded by the Italian Ministry for Universities and Research (MUR) under the grant FIT4MEDROB (MUR: PNC0000007) (S. Rossi), by the Italian MUR and EU under the CHIST-ERA IV project COHERENT (PCI2020-120718-2) (I. Cucciniello), and by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 801342 (Tecniospring INDUSTRY) and by the EU-founded project grant agreement No 101070930 (VALAWAI) (A. Andriella)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From nanometric to giant polyion complex micelles via a hierarchical assembly of dendrimers

  • Lopez-Blanco, Roi
  • Magana Rodriguez, Jose Rodrigo
  • Esquena, Jordi
  • Fernandez-Megia, Eduardo
PIC (polyion complex) micelles prepared from oppositely charged block copolymers have typical diameters of about 30-50 nm. Attempts to control their size have proven elusive. Since the presence of a neutral hydrophilic block in the copolymers, such as poly(ethylene glycol) (PEG), allows confining the charged blocks within a core, reducing PEGylation was expected to produce larger micelles to accommodate fewer/smaller PEG chains at the corona., This work was supported by grant PID2021-127684OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. The authors also thank the financial support from Xunta de Galicia (ED431C 2022/21, and Centro de Investigación do Sistema Universitario de Galicia accreditation 2023-2027, ED431G 2023/03) and the European Union (European Regional Development Fund - ERDF). The authors are grateful to Carlos Fernández Pereira for helpful discussions about the fitting of PIC size data to Eq. (1) and the development of Eqs. (3), (5), and (7). The authors also thank Dr. Adriana L. Rojas and Isaac Santos-Pérez for cryo-TEM data collection at the EM Platform of CIC bioGUNE (Bilbao, Spain). J. R. M. acknowledges the European Union’s Horizon 2020 research and innovation program under Marie Sklodwska-Curie grant agreement (No. 801342, Tecniospring INDUSTRY) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activating Thermoplastic Polyurethane Surfaces with Poly(ethylene glycol)-Based Recombinant Human α-Defensin 5 Monolayers for Antibiofilm Activity

  • Rodríguez Rodríguez, Xavier
  • López Cano, Adrià
  • Mayolo Deloisa, Karla P.
  • Pich, Oscar Q.
  • Bierge, Paula
  • Ventosa, Nora
  • García-de-la-Maria, Cristina
  • Miró, José M.
  • Gasch, Oriol
  • Veciana, Jaume
  • Guasch, Judith
  • Arís, Anna
  • Garcia Fruitós, Elena
  • Ratera, Immaculada
Addressing multidrug-resistant microbial infections linked to implantable biomedical devices is an urgent need. In recent years, there has been an active exploration of different surface coatings to prevent and combat drug-resistant microbes. In this research, we present a facile chemical modification of thermoplastic polyurethane (TPU) surfaces with poly(ethylene glycol)-based recombinant human α-defensin 5 (HD5) protein with antimicrobial activity. TPU is one of the most relevant materials used for medical devices with good mechanical properties but also good chemical resistance, which makes it difficult to modify. The chemical modification of TPU surfaces is achieved via a three-step procedure based on (i) TPU activation using hexamethylene diisocyanate (HDI); (ii) interfacial reaction with poly(ethylene glycol) (PEG) derivatives; and finally, (iii) a facile click reaction between the PEG-maleimide terminated assembled monolayers on the TPU and the cysteine (-thiol) termination of the recently designed recombinant human α-defensin 5 (HD5) protein. The obtained PEG based HD5 assembled monolayers on TPU were characterized using a surface science multitechnique approach including scanning electron microscopy, atomic force microscopy, contact angle, and X-ray photoelectron spectroscopy. The modified TPU surfaces with the HD5 protein derivative exhibit broad-spectrum antibacterial properties reducing biofilm formation against Pseudomonas aeruginosa (Gram-negative), methicillin-resistant Staphylococcus aureus (MRSA) (Gram-positive) and methicillin-resistant Staphylococcus epidermidis (MRSE) (Gram-positive). These findings underscore the substantial potential of protein-modified TPU surfaces for applications in combating bacterial infections associated with implantable materials and devices., Financial support by the MICIU of Spain (projects PID2019-105622RBI00, PID2020-115296RA-I00, PID2022-137332OB-I00, CEX2019-000917-S, CEX2023- 001263-S), CSIC (project 2023AEP092), the Marató de TV3 foundation (project number 201812-30-31-32-33 and 202326-30-31-32-33), and the Generalitat de Catalunya (project SGR Cat 2021-00438 and 2021-01552) is acknowledged. The authors are also grateful for the financial support received from Instituto de Salud Carlos III and the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN). J.G. is grateful to the Max Planck Institute for Medical Research (Heidelberg, Germany) for their collaboration through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy”. ICMAB-CSIC acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S). J.M.M. received a personal 80:20 research grant from the Institut d’Investigacions Biomèdiques August Pi i Sunyer (IDIBAPS), Barcelona, Spain, during 2017–24. This work has been developed inside the Materials Science PhD program of Universitat Autonoma de Barcelona. X.R.R. was supported by a grant PTA2021-020955-I funded by MCIN/AEI/10.13039/501100011033 and the FSE. This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIO; TECSPR19-1-0065). A.L.-C. received a predoctoral fellowship from Generalitat de Catalunya (FI-AGAUR), and P.B. was supported by a PFIS predoctoral fellowship (FI20/00009) from the Instituto de Salud Carlos III. The authors also acknowledge the ICTS NANBIOSIS for the support of the Biomaterial Processing and Nanostructuring Unit (U6) at ICMAB-CSIC (https://www.nanbiosis.es/portfolio/u6-biomaterial-processing-and-nanostructuring-unit/)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A modular click ligand-directed approach to label endogenous dopamine D1 receptors in live cells

  • Gómez-Santacana, Xavier
  • Boutonnet, Marin
  • Martínez-Juvés, Carles
  • Cimadevila, Marta
  • Catena, Juanlo
  • Moutin, Enora
  • Roux, Thomas
  • Trinquet, Eric
  • Lamarque, Laurent
  • Perroy, Julie
  • Prézeau, Laurent
  • Zwier, Jurriaan M
  • Pin, Jean-Philippe
  • Llebaria, Amadeu
Most luminescence-based technologies to determine the pharmacological properties of G Protein-Coupled Receptors (GPCRs) rely on the overexpression of genetically modified receptors. However, it is essential to develop approaches allowing the specific labelling of native receptors. Here we report an innovative approach based on the use of molecular modules to build fluorescent ligand-directed probes that can label aminergic GPCRs. Such probes are readily prepared with a click reaction between a ligand that may include nucleophilic groups and a fluorescent electrophilic linker. The rapidity of click reaction before receptor labelling prevents a side reaction between the nucleophilic ligand and the electrophile. This approach allowed us to label D1 receptor in transfected cells and native receptors in neural cell lines, leaving the receptor fully functional. This approach will pave the way to develop new reagents and assays with which to monitor endogenous GPCRs' distribution, trafficking, activity or binding properties in their native environment., The project on which these results are based has received funding from Agence Nationale de la Recherche (ANR-17-CE11-0046), Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación and ERDF - A way of making Europe (projects CTQ2017-89222-R, PCI2018-093047 and PID2020-120499RB-I00) by the Catalan government (2021 SGR 00508) the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (TecniospringINDUSTRY, TECSPR19-1-0062) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIÓ). We thank the Dr. David Hamilton for proof-reding and language support, ARPEGE Pharmacology-Screening-Interactome platform facility (UMS Bio-campus, Montpellier, France) for the use of the plate readers, the MRI Montpellier Ressources Imagerie (UMS Bio-campus, Montpellier, France), member of the France-BioImaging national infrastructure supported by the French National Research Agency (ANR-10-INBS-04), «Investments for the future», for images acquisition, Lourdes Muñoz and Carme Serra from SIMChem (IQAC CSIC) for analytical support and helpful discussions, L. Clusan for the generation of the Flag-SNAPtag-D1 receptor, S. Soldevila, E. Bourrier, K. Belkacemi, J. Haubrich, S. Panarello, F. Malhaire, J. Kniazeff, C. Lavergne and X. Rovira for helpful discussions and technical support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards Explainable Proactive Robot Interactions for Groups of People in Unstructured Environments

  • Love, Tamlin
  • Andriella, Antonio
  • Alenyà, Guillem
For social robots to be able to operate in unstructured public spaces, they need to be able to gauge complex factors such as human-robot engagement and inter-person social groups, and be able to decide how and with whom to interact. Additionally, such robots should be able to explain their decisions after the fact, to improve accountability and confidence in their behavior. To address this, we present a two-layered proactive system that extracts high-level social features from low-level perceptions and uses these features to make high-level decisions regarding the initiation and maintenance of human-robot interactions. With this system outlined, the primary focus of this work is then a novel method to generate counterfactual explanations in response to a variety of contrastive queries. We provide an early proof of concept to illustrate how these explanations can be generated by leveraging the two-layer system., This work was supported by Horizon Europe under the MSCA grant agreement No 101072488 (TRAIL); by the "European Union NextGenerationEU/PRTR" project CHLOE-GRAPH PID2020-118649RBI00 funded by MCIN/ AEI /10.13039/ 501100011033; A. Andriella acknowledges the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No 801342 (Tecniospring INDUSTRY)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A photoswitchable positive allosteric modulator to control the activation of the metabotropic glutamate receptor 5 by light

  • Dumazer, Anaëlle
  • Borras-Tuduri, Roser
  • Truong, Iona
  • Cong, Xiaojing
  • Malhaire, Fanny
  • Rovira, Xavier
  • Gómez-Santacana, Xavier
  • Givalois, Laurent
  • Lebon, Guillaume
  • Llebaria, Amadeu
  • Goudet, Cyril
Data will be made available on request., The metabotropic glutamate receptor 5 (mGlu5) is widely expressed in the brain, where it plays an important role in synaptic plasticity, learning and memory, making it a therapeutic target of interest in various neurological disorders. In this study, we developed a photoswitchable positive allosteric modulator (PAM) of the mGlu5, as a novel tool for this clinically relevant drug target. To that aim, we used an azologisation strategy of the mGlu5 PAM agonist VU0424465 leading to the molecule azoglurax. We observed a reversible photoisomerization of azoglurax in solution with optimal wavelengths of 365 nm and 435 nm for trans to cis and cis to trans isomerization, respectively. In cell-based assays, azoglurax potentiates the agonist-induced activity of mGlu5 with a sub-micromolar potency in the dark. This potency is reduced under UV illumination. Similar to its parent molecule, azoglurax acts as an allosteric agonist of mGlu5, activating the receptor in the absence of glutamate, as demonstrated on a glutamate-insensitive mutant receptor. Docking and site-directed mutagenesis experiments also suggest that azoglurax and VU0424465 bind the same pocket. In addition, molecular dynamics on cis-azoglurax-bound mGlu5 suggests that its azoglurax cis isomer does not bind stably in the receptor, in contrast to the trans-isomer, explaining the difference of activity between the two isomers. In conclusion, azoglurax is the first mGlu5 photoswitchable PAM agonist reported to date, retaining the properties and the binding mode of its parent compound in the dark, while the insertion of an azobenzene confers light-regulated activity., The authors thank Lourdes Muñoz from SIMChem (IQAC-CSIC) for the use of analytical support and helpful discussions, Charleine Zussy and Mathieu Vitalis for helpful discussions, Ebba L. Lagerqvist for critical reading of the manuscript and the staff of Montpellier Biocampus Arpege facility for their technical help. MD simulations were performed using supercomputing resources from GENCI-TGCC France (grant A0150714630 2023-2024 to XC). This work was funded by the French National Research Agency (ANR) under the “Investissements d’avenir” program I-Site MUSE with the reference ANR-16-IDEX-0006 to AD, LG and CG, the reference ANR-17-NEU3-0001 under the frame of Neuron Cofund to RBT, AL and CG, and the reference ANR-20-CE11-019 to GL. This work was also financially supported by the Fondation pour la Recherche Médicale, grant number «MND202003011477», to IT, LG and CG and by the International Emerging Action (IEA) from the Centre National de la Recherche Scientifique (CNRS) to CG and AL, Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, and ERDF – A way of making Europe (PID2020-120499RB-I00, and PIE-RYC2020--029485-I) to A.L. and X.R., by the Agència de Gestió d'Ajuts Universitaris i de Recerca (2021 SGR 00508) and Tecnio association (URD316) to A.L. and by the Spanish National Research Council (20228AT014) to X.R. and European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement no. 801342 (Tecniospring INDUSTRY, TECSPR19-1-0062) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIÓ) to XG-S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing Robot Assistive Behaviour with Reinforcement Learning and Theory of Mind

  • Andriella, Antonio
  • Falcone, Giovanni
  • Rossi, Silvia
Adaptation to user preferences and the ability to infer and interpret human beliefs and intents, known as the Theory of Mind (ToM), are two critical aspects of effective human-robot collaboration. Despite their importance, very few studies have investigated the impact of adaptive robots with ToM capabilities. This work presents an exploratory comparative study to investigate how social robots simulating ToM capabilities affect user performance and perception. We design a two-tier architecture. The Q-learning agent on the first layer learns the robot’s higher-level behaviour. On the second layer, a heuristic-based ToM infers the user’s intended strategy and is responsible for implementing the robot’s assistance, as well as providing the motivation behind its choice. We conducted a user study in a real-world setting, involving 56 participants who interacted with either an adaptive robot simulating ToM capabilities, or with a robot lacking such capabilities. Our results suggest that participants in the ToM condition performed better, accepted the robot’s assistance more often, and perceived its ability to adapt, predict and detect their intentions to a greater extent. Our preliminary findings could inform future research and pave the way for the design of robot architectures for adaptive behaviour with ToM capabilities, where the choice of action is decoupled from its implementation., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.This work was partially funded by the Italian Ministry for Universities and Research (MUR) under the complementary actions to the NRRP “Fit4MedRob - Fit for Medical Robotics” Grant (PNC0000007) (S. Rossi), and by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 801342 (Tecniospring INDUSTRY) and by the EU-founded project grant agreement No 101070930 (VALAWAI) (A. Andriella)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

IoT gas sensors array for unobtrusive tracking of cooking activity

  • Haddi, Zouhair
  • Llano Viles, Joshua|||0000-0003-0713-1073
  • Alfaras Espinàs, Miquel
  • Marín López, Daniel
  • Perera Lluna, Alexandre|||0000-0001-6427-851X
  • Fernández García, Jose Alberto
  • Llauradó, Xavier
  • Avellana, Narcís
  • Fonollosa Magrinyà, Jordi|||0000-0001-8854-8588
  • Llobet Valero, Eduard
Recent research on remote tracking environments has strengthened smart home IoT ecosystems by the integration of multiple sensing tools that capture not only contextual data in a private setting, but also information about its residents. This shift paves the way for remote health industries, as information traditionally out of reach is available 24/7. Gas sensing, moving away from privacy-invasive tracking paradigms, emerges within this context, inspiring the monitoring of activities of daily living (ADLs) that could facilitate the remote healthcare supervision of the elderly. In this paper, we present how a gas sensing array based on low-cost commercial metal oxide (MOX) gas sensors has been assembled for the development of Principal Component Analysis (PCA) model which detects cooking activity within a household. Our resulting unobtrusive tracking system requiring no user input and posing no privacy concerns, suitable to other ADL use cases, highlights how AI-equipped IoT cloud infrastructures and accurate gas sensors are called to revolutionise remote healthcare., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 861782. This work was supported in part by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101029808, No 101007653 and No. 801342 (Tecniospring INDUSTRY). This work was supported by the Spanish Ministry of Economy and Competitiveness DPI2017-89827-R, ACCIÓ (Innotec ACE014/20/000018) and Share4Rare project (Grant Agreement 780262). With the support from CERCA Programme / Generalitat de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reviewing and exploring the qualitative impacts that different market and regulatory measures can have on encouraging energy communities based on their organizational structure

  • Eichman, Josh
  • Torrecillas Castelló, Marc
  • Corchero García, Cristina|||0000-0002-8465-0830
The emergence of energy communities represents a promising option to democratize the energy system by empowering consumers to take a more active role. This can aid in achieving energy and environmental goals as well as encouraging more equitable distribution of costs and revenues between all parties on the energy system. Despite this potential, energy communities are still a nascent solution, the success of which is heavily influenced by regulations. As a result, there are a wide variety of organizational structures for energy communities at this time. This paper provides a review of the policy landscape in Spain as it relates to energy communities. This work also presents a formalized method for characterizing different energy community structures and provides a qualitative assessment of the impacts of different measures to encourage energy communities with respect to their organizational structure. Findings suggest that many market-focused measures, including wholesale, local flexibility, capacity, and multisector market measures favor larger, more integrated communities, while regulatory, legal, and organizational measures, including peer-to-peer trading, aggregation, and self-consumption favor smaller, more distributed communities. Additionally, when developing policies to encourage the growth of energy communities, policymakers should be cognizant of the progression of policies in the context of the desired outcomes for energy community growth specific to the region or country and its goals., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Multispectral retinography in healthy adult population

  • Burgos Fernández, Francisco Javier|||0000-0002-3749-6850
  • Alterini, Tommaso|||0000-0002-8922-8970
  • Díaz Douton, Fernando|||0000-0003-3699-015X
  • Bou Marín, Marina
  • Vilaseca Ricart, Meritxell|||0000-0001-8166-1617
Spectral reflectance of the eye fundus was evaluated in adult healthy patients through a fast visible and near-infrared multispectral fundus camera. Spectral signatures were analyzed for different ocular structures of the retina and the choroid., This project has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). This research was also supported by the Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) under the grant DPI2017-89414-R., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reflectance evaluation of eye fundus structures with a visible and near-infrared multispectral camera

  • Burgos Fernández, Francisco Javier|||0000-0002-3749-6850
  • Alterini, Tommaso|||0000-0002-8922-8970
  • Díaz Douton, Fernando|||0000-0003-3699-015X
  • González Alvarez, Laura
  • Mateo, Carlos
  • Mestre Ferrer, Clara|||0000-0003-0053-550X
  • Pujol Ramo, Jaume|||0000-0003-0811-9244
  • Vilaseca Ricart, Meritxell|||0000-0001-8166-1617
We examined the spectral reflectance of fundus structures in the visible and near-infrared (400–1300 nm) range for contributing to the medical diagnosis of fundus diseases. Spectral images of healthy eye fundus and other ocular diseases were acquired using a novel multispectral fundus camera. Reflectance metrics were computed based on contrast to analyze the spectral features. Significant differences were observed among the structures in healthy and diseased eye fundus. Specifically, near-infrared analysis allows imaging of deeper layers, such as the choroid, which, to date, has not been retrieved using traditional color fundus cameras. Pathological structures, which were hardly observable in color fundus images owing to metamerism, were also revealed by the developed multispectral fundus camera., "Funding: H2020Marie Skłodowska-Curie Actions (801342, Tecniospring INDUSTRY); Agència per a la Competitivitat de l’Empresa (801342, Tecniospring INDUSTRY); Generalitat de Catalunya (801342, Tecniospring INDUSTRY); Ministerio de Ciencia e Innovación- Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033, PID2020112527RB-I00)", Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

The application of Industry 4.0 technologies for automated health monitoring and surveillance during pandemics and postpandemic life

  • Marateb, Hamid Reza|||0000-0003-4408-2397
  • Rojas Martínez, Mónica Marlene|||0000-0002-9971-3566
  • Zamani, Shadi
  • Shirzadi, Mehdi
  • Koochekian, Amirhossein
  • Mañanas Villanueva, Miguel Ángel|||0000-0001-9836-6083
Industry 4.0 signifies a new step in the control and organization of the manufacturing value chain. It can provide better digital solutions for our day-to-day lives during pandemics and post-pandemic life, including better activity planning, global public health emergency, and risk assessment. Internet of Things (IoT), as a part of Industry 4.0, brings new opportunities in various applications, including smart healthcare and cities. The combination of an IoT system and Artificial Intelligence (AI) has the following capabilities in pandemic management: public security improvement, contact tracing to access public places, and automated diagnosis and post-pandemic prognosis. In this chapter, we discuss the contribution of Industry 4.0 (IoT, digitalization, Big Data, AI, and cloud-based computing) for automatic surveillance and health monitoring during pandemics and post-pandemic life. More than fifty papers published in 2020-2022 were analyzed in this chapter., This work was supported by the Beatriu de Pinós post-doctoral programme from the Office of the Secretary of Universities and Research from the Ministry of Business and Knowledge of the Government of Catalonia (Grant number: #2020 BP 00261) and the TecnioSpring Industry fellowship (ACCIO, H2020-EU- EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions, #ACE026/21/000035)., Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar::3.d - Reforçar la capacitat de tots els països, en particular els països en desenvolupament, en matèria d’alerta primerenca, reducció de riscos i gestió dels riscos per a la salut nacional i mundial
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Colorimetric analysis of eye fundus structures with multispectral retinography

  • Burgos Fernández, Francisco Javier|||0000-0002-3749-6850
  • Alterini, Tommaso|||0000-0002-8922-8970
  • Díaz Douton, Fernando|||0000-0003-3699-015X
  • Vilaseca Ricart, Meritxell|||0000-0001-8166-1617
The analysis of the eye fundus is critical to prevent retinal and choroidal diseases since most of them cause no symptoms at early stages. Treating them when the very first signs appear is crucial to avoid vision losses. To this end, the color of eye fundus structures of healthy and diseased patients was assessed from images acquired with a novel multispectral fundus camera (400 nm – 1300 nm) with high spectral and spatial resolution. Characteristic color traits were found: in healthy eyes, large CIEDE2000 color differences were reported between arteries and veins due to different blood oxygenation; the contrast of nerve fibers/fovea was enhanced, giving rise to relevant color differences; in eyes with age related macular degeneration, lesions such as drusen could be better distinguished than with traditional color retinography; alterations of the optic disk in patients with glaucoma were also assessed, showing remarkable CIEDE2000 values when compared to healthy patients, This project has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). This research was also supported by the Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) under the grant DPI2017-89414-R., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Análisis colorimétrico de estructuras de fondo de ojo mediante retinografía multiespectral

  • Burgos Fernández, Francisco Javier|||0000-0002-3749-6850
  • Alterini, Tommaso|||0000-0002-8922-8970
  • Díaz Douton, Fernando|||0000-0003-3699-015X
  • Pujol Ramo, Jaume|||0000-0003-0811-9244
  • Vilaseca Ricart, Meritxell|||0000-0001-8166-1617
El análisis del fondo del ojo es crucial para prevenir enfermedades retinianas y coroideas ya que la mayoría no causan síntomas en etapas tempranas. Tratarlas cuando aparecen los primeros indicios es fundamental para evitar pérdidas de visión irreversibles. Con este propósito, el color de las estructuras de fondo de ojo de pacientes sanos y enfermos se evaluó a partir de imágenes adquiridas con una cámara de fondo de ojo multiespectral (400nm-1300nm) con elevada resolución espectral y espacial. En ojos sanos aparecieron diferencias de color CIEDE2000 considerables entre arterias y venas por su diferente oxigenación; las fibras nerviosas y la fóvea aparecieron más contrastadas respecto al fondo, produciendo diferencias de color relevantes. En ojos afectados por degeneración macular asociada a la edad, se pudieron identificar mejor que en retinografías en color las características drusas y alteraciones del disco óptico en pacientes con glaucoma mostraron valores CIEDE2000 elevados respecto a pacientes sanos., Este proyecto ha recibido financiación del programa de investigación e innovación Horizon 2020 de la Unión Europea bajo el acuerdo de subvención Marie kłodowska-Curie No. 801342 (Tecniospring INDUSTRY), así como de la Agència per a la Competitivitat de l’Empresa de la Generalitat de Catalunya (ACCIÓ). Además, esta publicación es parte del proyecto de I+D+i PID2020- 112527RB-I00, financiada por MCIN/AEI/10.13039/501100011033.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Safe extended-range cycling of Li4Ti5O12-based anodes for ultra-high capacity thin-film batteries

  • Siller, V.
  • Gonzalez-Rosillo, J.
  • Nuñez Eroles, M.
  • Stchakovsky, M.
  • Arenal, R.
  • Morata, A.
  • Tarancón, A.
Lithium titanium oxide thin films are increasingly popular anode materials in microbatteries and hybrid supercapacitors, due to their improved safety, cost, and cycle lifetime. So far, research efforts have mainly focused on the pure spinel phase Li4Ti5O12 (LTO) and only a small fraction is dedicated to a broader spectrum of titanium-based metal oxide thin films. In this work, pulsed laser deposition is used in a multilayer approach by alternating LTO and Li2O ablations to create a heterogeneous landscape in the titania-based micro-anodes. This rich microstructure enables the safe extension of the accessible electrochemical window down to 0.2 V. This leads to extraordinary high specific capacities of 250–300 mAh/g at 1 C, maintaining a stable discharge capacity of 180 mAh/g at 16 C. Operando spectroscopic ellipsometry and Raman spectroscopy are used to track optical and structural changes as a function of the discharge voltage down to 0.01 V. A kinetically limited degradation mechanism based on the effective trapping of Li-ions at the octahedral 16c positions is proposed when cycling in the range of 0.2–0.01 V. In essence, our work contributes to titania-based nanoshapes as anodes of increased specific capacity due to a higher Li-site occupation, while maintaining their good stability and safety. © 2022 The Author(s)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High performance LATP thin film electrolytes for all-solid-state microbattery applications

  • Siller V.
  • Morata A.
  • Eroles M.N.
  • Arenal R.
  • Gonzalez-Rosillo J.C.
  • López Del Amo J.M.
  • Tarancón A.
The NASICON superionic solid electrolyte Li1+xAlxTi2-x(PO4)3 (LATP) with 0.3 = x = 0.5 remains one of the most promising solid electrolytes thanks to its good ionic conductivity and outstanding stability in ambient air. Despite the intensive research for bulk systems, there are only very few studies of LATP in a thin film form (thickness < 1 µm) and its implementation in all-solid-state batteries and microbatteries. The following study fills this gap by exploring the properties of high performance LATP thin films fabricated by large-area Pulsed Laser Deposition (PLD). The as-deposited thin films exhibit an ionic conductivity of around 0.5 µS cm-1 at room temperature (comparable to the state-of-the-art of LiPON) which increases to a remarkably high value of 0.1 mS cm-1 after an additional annealing at 800 °C. A possible cause for this significant enhancement in ionic conductivity by two orders of magnitude is the formation of a glassy, intergranular phase. The performance of both as-deposited and annealed LATP films makes them suitable as solid electrolytes, which opens the path to a new family of stable and high performance all-solid-state thin film batteries. This journal is © The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Phthalate exposure and the metabolic syndrome: A systematic review and meta-analysis

  • Mérida, Diana María
  • Moreno-Franco, Belén
  • Marquès, Montse
  • León-Latre, Montserrat
  • Laclaustra, Martín
  • Guallar-Castillón, Pilar
Phthalates are chemicals widely used in plastic-based consumer products, and human exposure is universal. They are classified as endocrine disruptors, and specific phthalate metabolites have been associated with an increased risk of cardiometabolic diseases. The aim of this study was to assess the association between phthalate exposure and the metabolic syndrome in the general population. A comprehensive literature search was performed in four databases (Web of Science, Medline, PubMed, and Scopus). We included all the observational studies that evaluate the association between phthalate metabolites and the metabolic syndrome available until January 31st, 2023. Pooled Odds Ratios (OR) and their 95% confidence intervals were calculated by using the inverse-variance weighted method. Nine cross-sectional studies and 25,365 participants aged from 12 to 80 were included. Comparing extreme categories of phthalate exposure, the pooled ORs for the metabolic syndrome were: 1.08 (95% CI, 1.02–1.16, I2 = 28%) for low molecular weight phthalates, and 1.11 (95% CI, 1.07–1.16, I2 = 7%) for high molecular weight phthalates. For individual phthalate metabolites, the pooled ORs that achieved statistical significance were: 1.13 (95% CI, 1.00–1.27, I2 = 24%) for MiBP; 1.89 (95% CI, 1.17–3.07, I2 = 15%) for MMP in men; 1.12 (95% CI, 1.00–1.25, I2 = 22%) for MCOP; 1.09 (95% CI, 0.99–1.20, I2 = 0%) for MCPP; 1.16 (95% CI, 1.05–1.28, I2 = 6%) for MBzP; and 1.16 (95% CI, 1.09–1.24, I2 = 14%) for DEHP (including ΣDEHP and its metabolites). In conclusion, both low molecular weight and high molecular weight phthalates were associated with an 8 and 11% higher prevalence of the MetS, respectively. The exposure to six specific phthalate metabolites was associated with a higher prevalence of the MetS.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Análisis colorimétrico de estructuras de fondo de ojo mediante retinografía multiespectral

  • Burgos Fernández, Francisco Javier
  • Alterini, Tommaso
  • Díaz Douton, Fernando
  • Pujol Ramo, Jaume
  • Vilaseca Ricart, Meritxell
El análisis del fondo del ojo es crucial para prevenir enfermedades retinianas y coroideas ya que la mayoría no causan síntomas en etapas tempranas. Tratarlas cuando aparecen los primeros indicios es fundamental para evitar pérdidas de visión irreversibles. Con este propósito, el color de las estructuras de fondo de ojo de pacientes sanos y enfermos se evaluó a partir de imágenes adquiridas con una cámara de fondo de ojo multiespectral (400nm-1300nm) con elevada resolución espectral y espacial. En ojos sanos aparecieron diferencias de color CIEDE2000 considerables entre arterias y venas por su diferente oxigenación; las fibras nerviosas y la fóvea aparecieron más contrastadas respecto al fondo, produciendo diferencias de color relevantes. En ojos afectados por degeneración macular asociada a la edad, se pudieron identificar mejor que en retinografías en color las características drusas y alteraciones del disco óptico en pacientes con glaucoma mostraron valores CIEDE2000 elevados respecto a pacientes sanos., Este proyecto ha recibido financiación del programa de investigación e innovación Horizon 2020 de la Unión Europea bajo el acuerdo de subvención Marie kłodowska-Curie No. 801342 (Tecniospring INDUSTRY), así como de la Agència per a la Competitivitat de l’Empresa de la Generalitat de Catalunya (ACCIÓ). Además, esta publicación es parte del proyecto de I+D+i PID2020- 112527RB-I00, financiada por MCIN/AEI/10.13039/501100011033.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reviewing and exploring the qualitative impacts that different market and regulatory measures can have on encouraging energy communities based on their organizational structure

  • Eichman, Josh
  • Torrecillas Castelló, Marc
  • Corchero García, Cristina
The emergence of energy communities represents a promising option to democratize the energy system by empowering consumers to take a more active role. This can aid in achieving energy and environmental goals as well as encouraging more equitable distribution of costs and revenues between all parties on the energy system. Despite this potential, energy communities are still a nascent solution, the success of which is heavily influenced by regulations. As a result, there are a wide variety of organizational structures for energy communities at this time. This paper provides a review of the policy landscape in Spain as it relates to energy communities. This work also presents a formalized method for characterizing different energy community structures and provides a qualitative assessment of the impacts of different measures to encourage energy communities with respect to their organizational structure. Findings suggest that many market-focused measures, including wholesale, local flexibility, capacity, and multisector market measures favor larger, more integrated communities, while regulatory, legal, and organizational measures, including peer-to-peer trading, aggregation, and self-consumption favor smaller, more distributed communities. Additionally, when developing policies to encourage the growth of energy communities, policymakers should be cognizant of the progression of policies in the context of the desired outcomes for energy community growth specific to the region or country and its goals., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Colorimetric analysis of eye fundus structures with multispectral retinography

  • Burgos Fernández, Francisco Javier
  • Alterini, Tommaso
  • Díaz Douton, Fernando
  • Vilaseca Ricart, Meritxell
The analysis of the eye fundus is critical to prevent retinal and choroidal diseases since most of them cause no symptoms at early stages. Treating them when the very first signs appear is crucial to avoid vision losses. To this end, the color of eye fundus structures of healthy and diseased patients was assessed from images acquired with a novel multispectral fundus camera (400 nm – 1300 nm) with high spectral and spatial resolution. Characteristic color traits were found: in healthy eyes, large CIEDE2000 color differences were reported between arteries and veins due to different blood oxygenation; the contrast of nerve fibers/fovea was enhanced, giving rise to relevant color differences; in eyes with age related macular degeneration, lesions such as drusen could be better distinguished than with traditional color retinography; alterations of the optic disk in patients with glaucoma were also assessed, showing remarkable CIEDE2000 values when compared to healthy patients, This project has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). This research was also supported by the Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) under the grant DPI2017-89414-R., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

The application of Industry 4.0 technologies for automated health monitoring and surveillance during pandemics and postpandemic life

  • Marateb, Hamid Reza
  • Rojas Martínez, Mónica Marlene
  • Zamani, Shadi
  • Shirzadi, Mehdi
  • Koochekian, Amirhossein
  • Mañanas Villanueva, Miguel Ángel
Industry 4.0 signifies a new step in the control and organization of the manufacturing value chain. It can provide better digital solutions for our day-to-day lives during pandemics and post-pandemic life, including better activity planning, global public health emergency, and risk assessment. Internet of Things (IoT), as a part of Industry 4.0, brings new opportunities in various applications, including smart healthcare and cities. The combination of an IoT system and Artificial Intelligence (AI) has the following capabilities in pandemic management: public security improvement, contact tracing to access public places, and automated diagnosis and post-pandemic prognosis. In this chapter, we discuss the contribution of Industry 4.0 (IoT, digitalization, Big Data, AI, and cloud-based computing) for automatic surveillance and health monitoring during pandemics and post-pandemic life. More than fifty papers published in 2020-2022 were analyzed in this chapter., This work was supported by the Beatriu de Pinós post-doctoral programme from the Office of the Secretary of Universities and Research from the Ministry of Business and Knowledge of the Government of Catalonia (Grant number: #2020 BP 00261) and the TecnioSpring Industry fellowship (ACCIO, H2020-EU- EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions, #ACE026/21/000035)., Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar::3.d - Reforçar la capacitat de tots els països, en particular els països en desenvolupament, en matèria d’alerta primerenca, reducció de riscos i gestió dels riscos per a la salut nacional i mundial, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nucleic acid-loaded poly(beta-aminoester) nanoparticles for cancer nano-immuno therapeutics, the good, the bad, and the future

  • Magana Rodriguez, Jose Rodrigo
  • Guerra-Rebollo, Marta
  • Borrós, Salvador
  • Fornaguera, Cristina
Immunotherapy has emerged as a promising approach to cancer treatment, offering improved survival rates and enhanced patients’ quality of life. However, realizing the full potential of immunotherapy in clinical practice remains a challenge, as there is still plenty of room for modulating the complexity of the human immune system in favor of an antitumor immunogenicity. Nanotechnology, with its unique properties, holds promise in augmenting the efficacy of cancer immunotherapies in biotherapeutic protection and site- and time-controlled delivery of the immune modulator biologicals. Polymeric nanoparticles are promising biomaterials among different nanocarriers thanks to their robustness, versatility, and cost-efficient design and production. This perspective paper overviews critical concepts in nanometric advanced delivery systems applied to cancer immunotherapy. We focus on a detailed exploration of the current state of the art and trends in using poly(beta-aminoester) (pBAE) polymers for nucleic acid-based antitumor immunotherapies. Through different examples of the use of pBAE polymers reported in the literature, we revise the main advantages these polymers offer and some challenges to overcome. Finally, the paper provides insights and predictions on the path toward the clinical implementation of cancer nano-immunotherapies, highlighting the potential of pBAE polymers for advancements in this field., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Seminal Microbiota of Idiopathic Infertile Patients and Its Relationship With Sperm DNA Integrity

  • Closa Gil, Laia
  • Hobeich, Carlos
  • Castel, Ana Belén
  • Vidal Pérez, Francisco
  • Garcia Martínez, Iris
  • Garcia Segura, Sergio
  • del Rey Azpiri, Javier
Oxidative stress; Seminal microbiome; Sperm dna damage, Estrés oxidativo; Microbioma seminal; Daño en el ADN de los espermatozoides, Estrès oxidatiu; Microbioma seminal; Dany a l'ADN dels espermatozoides, The development of new biomarkers for human male infertility is crucial to improve the diagnosis and the prognosis of this disease. Recently, seminal microbiota was shown to be related to sperm quality parameters, suggesting an effect in human fertility and postulating it as a biomarker candidate. However, its relationship to sperm DNA integrity has not been studied yet. The aim of the present study is to characterize the seminal microbiota of a western Mediterranean population and to evaluate its relationship to sperm chromatin integrity parameters, and oxidative stress. For that purpose, 14 samples from sperm donors and 42 samples from infertile idiopathic patients were obtained and were analyzed to assess the composition of the microbiota through full-length 16S rRNA gene sequencing (Illumina MiSeq platform). Microbial diversity and relative abundances were compared to classic sperm quality parameters (macroscopic semen parameters, motility, morphology and concentration), chromatin integrity (global DNA damage, double-stranded DNA breaks and DNA protamination status) and oxidative stress levels (oxidation-reduction potential). The seminal microbiota observed of these samples belonged to the phyla Firmicutes, Proteobacteria, Actinobacteria and Bacteroidetes. The most abundant genera were Finegoldia, Peptoniphilus, Anaerococcus, Campylobacter, Streptococcus, Staphylococcus, Moraxella, Prevotella, Ezakiella, Corynebacterium and Lactobacillus. To our knowledge, this is the first detection of Ezakiella genus in seminal samples. Two clusters of microbial profiles were built based on a clustering analysis, and specific genera were found with different frequencies in relation to seminal quality defects. The abundances of several bacteria negatively correlate with the sperm global DNA fragmentation, most notably Moraxella, Brevundimonas and Flavobacterium. The latter two were also associated with higher sperm motility and Brevundimonas additionally with lower oxidative-reduction potential. Actinomycetaceae, Ralstonia and Paenibacillus correlated with reduced chromatin protamination status and increased double-stranded DNA fragmentation. These effects on DNA integrity coincide in many cases with the metabolism or enzymatic activities of these genera. Significant differences between fertile and infertile men were found in the relative presence of the Propionibacteriaceae family and the Cutibacterium, Rhodopseudomonas and Oligotropha genera, which supports its possible involvement in male fertility. Our findings sustain the hypothesis that the seminal microbiome has an effect on male fertility., This research was funded by the European Regional Development Fund and Instituto de Salud Carlos III (Economy, Industry and Competitiveness Ministry, Madrid, Spain; Project PI14/00119) and Generalitat de Catalunya (2017SGR1796). Supported by the European Union’s Horizon 2020 Research and Innovation scheme under the Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY; TECSPR-19-1-0003, to JR-M).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Multispectral retinography in healthy adult population

  • Burgos Fernández, Francisco Javier
  • Alterini, Tommaso
  • Díaz Douton, Fernando
  • Bou Marín, Marina
  • Vilaseca Ricart, Meritxell
Spectral reflectance of the eye fundus was evaluated in adult healthy patients through a fast visible and near-infrared multispectral fundus camera. Spectral signatures were analyzed for different ocular structures of the retina and the choroid., This project has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). This research was also supported by the Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) under the grant DPI2017-89414-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Activating Thermoplastic Polyurethane Surfaces with Poly(ethylene glycol)-Based Recombinant Human α‑Defensin 5 Monolayers for Antibiofilm Activity

  • Rodríguez Rodríguez, Xavier
  • López-Cano, Adrià
  • Mayolo-Deloisa, Karla
  • Pich, Oscar Q.
  • Bierge, Paula
  • Ventosa, Nora
  • García-de-la-Maria, Cristina
  • Miró, José M.
  • Gasch, Oriol
  • Veciana, Jaume
  • Guasch, Judith
  • Arís, Anna
  • Garcia-Fruitos, Elena
  • Ratera, Imma
  • FUNCATH
Addressing multidrug-resistant microbial infections linked to implantable biomedical devices is an urgent need. In recent years, there has been an active exploration of different surface coatings to prevent and combat drug-resistant microbes. In this research, we present a facile chemical modification of thermoplastic polyurethane (TPU) surfaces with poly(ethylene glycol)-based recombinant human α-defensin 5 (HD5) protein with antimicrobial activity. TPU is one of the most relevant materials used for medical devices with good mechanical properties but also good chemical resistance, which makes it difficult to modify. The chemical modification of TPU surfaces is achieved via a three-step procedure based on (i) TPU activation using hexamethylene diisocyanate (HDI); (ii) interfacial reaction with poly(ethylene glycol) (PEG) derivatives; and finally, (iii) a facile click reaction between the PEG-maleimide terminated assembled monolayers on the TPU and the cysteine (-thiol) termination of the recently designed recombinant human α-defensin 5 (HD5) protein. The obtained PEG based HD5 assembled monolayers on TPU were characterized using a surface science multitechnique approach including scanning electron microscopy, atomic force microscopy, contact angle, and X-ray photoelectron spectroscopy. The modified TPU surfaces with the HD5 protein derivative exhibit broad-spectrum antibacterial properties reducing biofilm formation against Pseudomonas aeruginosa (Gram-negative), methicillin-resistant Staphylococcus aureus (MRSA) (Gram-positive) and methicillin-resistant Staphylococcus epidermidis (MRSE) (Gram-positive). These findings underscore the substantial potential of protein-modified TPU surfaces for applications in combating bacterial infections associated with implantable materials and devices., Financial support by the MICIU of Spain (projects PID2019105622RBI00, PID2020-115296RA-I00, PID2022-137332OBI00, CEX2019-000917-S, CEX2023- 001263-S), CSIC (project 2023AEP092), the Marató de TV3 foundation (project number 201812-30-31-32-33 and 202326-30-31-32-33), and the Generalitat de Catalunya (project SGR Cat 2021-00438 and 2021-01552) is acknowledged. The authors are also grateful for the financial support received from Instituto de Salud Carlos III and the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBERBBN). J.G. is grateful to the Max Planck Institute for Medical Research (Heidelberg, Germany) for their collaboration through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy”. ICMAB-CSIC acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S). J.M.M. received a personal 80:20 research grant from the Institut d’Investigacions Biomediques August Pi i Sunyer (IDIBAPS), Barcelona, Spain, during 2017−24. This work has been developed inside the Materials Science PhD program of Universitat Autonoma de Barcelona. X.R.R. was supported by a grant PTA2021-020955-I funded by MCIN/AEI/10.13039/ 501100011033 and the FSE. This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia’s Agency for Business Competitiveness (ACCIO; TECSPR19-1-0065). A.L.-C. received a predoctoral fellowship from Generalitat de Catalunya (FIAGAUR), and P.B. was supported by a PFIS predoctoral fellowship (FI20/00009) from the Instituto de Salud Carlos III. The authors also acknowledge the ICTS NANBIOSIS for the support of the Biomaterial Processing and Nanostructuring Unit (U6) at ICMAB-CSIC (https://www.nanbiosis.es/ portfolio/u6-biomaterial-processing-and-nanostructuring-unit/, info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Comparative Analysis of Electricity Demand Forecasting at Substation Level

  • Segura Soler, Alex
  • Lancereau, Jérémy
  • Meléndez i Frigola, Joaquim
  • Do Carmo, Carolina Madeira Ramos
Growing electrical demand on the electric system along with the rising use of renewable energy sources is highlighting the importance of energy flexibility management on the electric grid. The Electric System Operators at both transmission (TSO) and distribution level (DSO) are responsible to ensure the security of supply and efficiency of the grid under strict balancing conditions (demand equals supply at every time instant). Acting on both generation and demand to maintain this equilibrium considering the technical constraints of the grid is known as flexibility management and it requires accurate generation and demand forecasting to predict possible critical events and react accordingly. The objective of this paper is to analyze the performance of different forecasting methods for predicting demand at the substation level. Substation level data is the result of aggregating the consumption and generation data of multiple points on the grid. Results show that current state of the art algorithms, such as deep learning models, perform better than simpler methods, such as random forests, specially when datasets do not present clearly repetitive profiles. Deep learning models manage to reduce forecasting error by 16% on average compared to random forest models on next day load forecasting, whereas the forecasting error reduction on next hour load forecasting is 5%, The FEVER project - Flexible Energy Production, Demand and Storage-based Virtual Power Plants for Electricity Markets and Resilient DSO Operation - is acknowledged by contributing with the data used in this work. FEVER was funded by the European Union (grant agreement N°864537), The THERMO-X (Tecniospring INDUSTRY ACE026/21/000080) project has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ), 7
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reflectance evaluation of eye fundus structures with a visible and near-infrared multispectral camera

  • Burgos Fernández, Francisco Javier
  • Alterini, Tommaso
  • Díaz Douton, Fernando
  • González Alvarez, Laura
  • Mateo, Carlos
  • Mestre Ferrer, Clara
  • Pujol Ramo, Jaume
  • Vilaseca Ricart, Meritxell
We examined the spectral reflectance of fundus structures in the visible and near-infrared (400–1300 nm) range for contributing to the medical diagnosis of fundus diseases. Spectral images of healthy eye fundus and other ocular diseases were acquired using a novel multispectral fundus camera. Reflectance metrics were computed based on contrast to analyze the spectral features. Significant differences were observed among the structures in healthy and diseased eye fundus. Specifically, near-infrared analysis allows imaging of deeper layers, such as the choroid, which, to date, has not been retrieved using traditional color fundus cameras. Pathological structures, which were hardly observable in color fundus images owing to metamerism, were also revealed by the developed multispectral fundus camera., "Funding: H2020Marie Skłodowska-Curie Actions (801342, Tecniospring INDUSTRY); Agència per a la Competitivitat de l’Empresa (801342, Tecniospring INDUSTRY); Generalitat de Catalunya (801342, Tecniospring INDUSTRY); Ministerio de Ciencia e Innovación- Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033, PID2020112527RB-I00)", Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

IoT gas sensors array for unobtrusive tracking of cooking activity

  • Haddi, Zouhair
  • Llano Viles, Joshua
  • Alfaras Espinàs, Miquel
  • Marín López, Daniel
  • Perera Lluna, Alexandre
  • Fernández García, Jose Alberto
  • Llauradó, Xavier
  • Avellana, Narcís
  • Fonollosa Magrinyà, Jordi
  • Llobet Valero, Eduard
Recent research on remote tracking environments has strengthened smart home IoT ecosystems by the integration of multiple sensing tools that capture not only contextual data in a private setting, but also information about its residents. This shift paves the way for remote health industries, as information traditionally out of reach is available 24/7. Gas sensing, moving away from privacy-invasive tracking paradigms, emerges within this context, inspiring the monitoring of activities of daily living (ADLs) that could facilitate the remote healthcare supervision of the elderly. In this paper, we present how a gas sensing array based on low-cost commercial metal oxide (MOX) gas sensors has been assembled for the development of Principal Component Analysis (PCA) model which detects cooking activity within a household. Our resulting unobtrusive tracking system requiring no user input and posing no privacy concerns, suitable to other ADL use cases, highlights how AI-equipped IoT cloud infrastructures and accurate gas sensors are called to revolutionise remote healthcare., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 861782. This work was supported in part by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101029808, No 101007653 and No. 801342 (Tecniospring INDUSTRY). This work was supported by the Spanish Ministry of Economy and Competitiveness DPI2017-89827-R, ACCIÓ (Innotec ACE014/20/000018) and Share4Rare project (Grant Agreement 780262). With the support from CERCA Programme / Generalitat de Catalunya., Peer Reviewed, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Programmable Organic Chipless RFID Tags Inkjet Printed on Paper Substrates

  • Moras Albero, Miquel|||0000-0003-3397-2730
  • Martinez Domingo, Carme|||0000-0002-1897-5362
  • Escude Pujol, Roger|||0000-0002-0780-8104
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Terés Terés, Lluís|||0000-0002-9263-411X
  • Martín, Ferran|||0000-0002-1494-9167
  • Ramon, Eloi|||0000-0001-9974-8112
In this paper, an organic, fully recyclable and eco-friendly 20-bit inkjet-printed chipless RFID tag is presented. The tag operates in the near field and is implemented by means of chains of resonant elements. The characterization and manufacturing process of the tag, printed with a few layers of a commercial organic ink on conventional paper substrate (DIN A4), are presented, and tag functionality is demonstrated by reading it by means of a custom-designed reader. The tags are read by proximity (through the near field), by displacing them over a resonator-loaded transmission line, and each resonant element (bit) of the tag is interrogated by a harmonic signal tuned to the resonance frequency. The coupling between the reader line and the resonant elements of the tag produce and amplitude modulated (AM) signal containing the identification (ID) code of the tag.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Decline of Sperm Quality over the Last Two Decades in the South of Europe, A Retrospective Study in Infertile Patients

  • Garcia-Grau, Emma|||0000-0001-5682-4058
  • Lleberia, Judith
  • Costa, Laura|||0009-0004-8755-2306
  • Guitart, Maria|||0000-0003-2957-7404
  • Yeste Oliveras, Marc|||0000-0002-2209-340X
  • Benet i Català, Jordi|||0000-0001-6185-2555
  • Amengual Guedan, Maria Jose|||0000-0002-5385-3061
  • Ribas-Maynou, Jordi|||0000-0002-9101-2044
While previous studies showed that sperm quality has decreased over the last decades, others did not report such reductions, suggesting that the region where the population is evaluated has an influence. The current research, which was conducted on a regional scale, did not find variations in sperm count but did observe a drop in sperm motility and morphology. Semen quality has a direct relation to male fertility. Whether sperm variables in humans have decreased over the last years is still uncertain, with some studies showing a decline and others reporting no changes. In this regard, previous research has suggested that lifestyle and environmental conditions may contribute to this variability, calling for regional studies. The present work is a retrospective, unicentric study that includes semen samples analyzed between 1997 and 2017 at the Parc Taulí Hospital (Barcelona metropolitan area). First, a multivariate analysis including the age as a confounding factor showed a statistically significant decrease in semen volume, pH, progressive motility, morphology and total motile sperm over time. Contrarily, no significant variation in sperm count or concentration was observed. Mean reductions per year were -0.02 mL for volume, -0.57% for progressively motile sperm and -0.72% for sperm with normal morphology. Interestingly, the average annual temperature registered by the Spanish Meteorology Agency negatively correlated to sperm morphology and sperm count (Rs = -0.642; p = 0.002 and Rs = -0.435; p = 0.049, respectively). In conclusion, the present study based on infertile patients from the Barcelona area found a decline in sperm motility and morphology, without effects on sperm count. Changes in temperature appeared to be associated to this decline, but further studies are needed to address the mechanisms linked to the observed variations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Seminal Microbiota of Idiopathic Infertile Patients and Its Relationship With Sperm DNA Integrity

  • Garcia Segura, Sergio|||0000-0001-9594-2938
  • Rey Azpiri, Javier del|||0000-0001-7887-7871
  • Closa, Laia|||0000-0001-8007-5077
  • García-Martinez, Iris|||0000-0001-6656-3322
  • Hobeich, Carlos
  • Castel, Ana Belén
  • Vidal, Francisco|||0000-0001-8089-4945
  • Benet i Català, Jordi|||0000-0001-6185-2555
  • Ribas-Maynou, Jordi|||0000-0002-9101-2044
  • Oliver Bonet, Maria|||0000-0001-5635-6741
The development of new biomarkers for human male infertility is crucial to improve the diagnosis and the prognosis of this disease. Recently, seminal microbiota was shown to be related to sperm quality parameters, suggesting an effect in human fertility and postulating it as a biomarker candidate. However, its relationship to sperm DNA integrity has not been studied yet. The aim of the present study is to characterize the seminal microbiota of a western Mediterranean population and to evaluate its relationship to sperm chromatin integrity parameters, and oxidative stress. For that purpose, 14 samples from sperm donors and 42 samples from infertile idiopathic patients were obtained and were analyzed to assess the composition of the microbiota through full-length 16S rRNA gene sequencing (Illumina MiSeq platform). Microbial diversity and relative abundances were compared to classic sperm quality parameters (macroscopic semen parameters, motility, morphology and concentration), chromatin integrity (global DNA damage, double-stranded DNA breaks and DNA protamination status) and oxidative stress levels (oxidation-reduction potential). The seminal microbiota observed of these samples belonged to the phyla Firmicutes, Proteobacteria, Actinobacteria and Bacteroidetes. The most abundant genera were Finegoldia, Peptoniphilus, Anaerococcus, Campylobacter, Streptococcus, Staphylococcus, Moraxella, Prevotella, Ezakiella, Corynebacterium and Lactobacillus. To our knowledge, this is the first detection of Ezakiella genus in seminal samples. Two clusters of microbial profiles were built based on a clustering analysis, and specific genera were found with different frequencies in relation to seminal quality defects. The abundances of several bacteria negatively correlate with the sperm global DNA fragmentation, most notably Moraxella, Brevundimonas and Flavobacterium. The latter two were also associated with higher sperm motility and Brevundimonas additionally with lower oxidative-reduction potential. Actinomycetaceae, Ralstonia and Paenibacillus correlated with reduced chromatin protamination status and increased double-stranded DNA fragmentation. These effects on DNA integrity coincide in many cases with the metabolism or enzymatic activities of these genera. Significant differences between fertile and infertile men were found in the relative presence of the Propionibacteriaceae family and the Cutibacterium, Rhodopseudomonas and Oligotropha genera, which supports its possible involvement in male fertility. Our findings sustain the hypothesis that the seminal microbiome has an effect on male fertility.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Soft Optomechanical Systems for Sensing, Modulation, and Actuation

  • Pujol Vila, Ferran|||0000-0002-6811-2426
  • Güell Grau, Pau|||0000-0002-2363-4079
  • Nogués, Josep|||0000-0003-4616-1371
  • Alvarez, Mar|||0000-0003-4590-4401
  • Sepúlveda, Borja|||0000-0002-1562-7602
Soft optomechanical systems have the ability to reversibly respond to optical and mechanical external stimuli by changing their own properties (e.g., shape, size, viscosity, stiffness, color or transmittance). These systems typically combine the optical properties of plasmonic, dielectric or carbon-based nanomaterials with the high elasticity and deformability of soft polymers, thus opening the path for the development of new mechanically tunable optical systems, sensors, and actuators for a wide range of applications. This review focuses on the recent progresses in soft optomechanical systems, which are here classified according to their applications and mechanisms of optomechanical response. The first part summarizes the soft optomechanical systems for mechanical sensing and optical modulation based on the variation of their optical response under external mechanical stimuli, thereby inducing mechanochromic or intensity modulation effects. The second part describes the soft optomechanical systems for the development of light induced mechanical actuators based on different actuation mechanisms, such as photothermal effects and phase transitions, among others. The final section provides a critical analysis of the main limitations of current soft optomechanical systems and the progress that is required for future devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An Algorithm to Predict the Lack of Pregnancy after Intrauterine Insemination in Infertile Patients

  • Garcia-Grau, Emma|||0000-0001-5682-4058
  • Oliveira, Mario|||0000-0001-9483-2745
  • Amengual Guedan, Maria Jose|||0000-0002-5385-3061
  • Rodríguez Sánchez, Encarna
  • Veraguas-Imbernon, Ana
  • Costa, Laura|||0009-0004-8755-2306
  • Benet i Català, Jordi|||0000-0001-6185-2555
  • Ribas-Maynou, Jordi|||0000-0002-9101-2044
Increasing intrauterine insemination (IUI) success rates is essential to improve the quality of care for infertile couples. Additionally, straight referral of couples with less probability of achieving a pregnancy through IUI to more complex methods such as in vitro fertilization is important to reduce costs and the time to pregnancy. The aim of the present study is to prospectively evaluate the threshold values for different parameters related to success in intrauterine insemination in order to provide better reproductive counseling to infertile couples, moreover, to generate an algorithm based on male and female parameters to predict whether the couple is suitable for achieving pregnancy using IUI. For that, one hundred ninety-seven infertile couples undergoing 409 consecutive cycles of intrauterine insemination during a two-year period were included. The first year served as a definition of the parameters and thresholds related to pregnancy achievement, while the second year was used to validate the consistency of these parameters. Subsequently, those parameters that remained consistent throughout two years were included in a generalized estimating equation model (GEE) to determine their significance in predicting pregnancy achievement. Parameters significantly associated with the lack of pregnancy through IUI and included in the GEE were (p < 0.05): (i) male age
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Flexible and Binder-Free Iron Phosphide Electrodes Using a Three-Dimensional Support for High Hydrogen Productivity

  • Díez-García, María Isabel|||0000-0001-9939-8642
  • García Blanco, Andrés Alberto
  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Botifoll, Marc|||0000-0002-4876-6393
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Qamar, Mohammad|||0000-0002-5351-9872
  • Morante, Joan Ramon|||0000-0002-4981-4633
In this work, an inexpensive and reliable microstructured electrode for the hydrogen evolution reaction (HER) is developed. This cathode is made of Earth-abundant elements consisting of iron phosphide as an electrocatalyst and carbon felt (CF) as a flexible conductive scaffold. Its porous character and binder-free FeP coverage over the carbon fibers generate a high number of accessible active sites for the reaction, achieving a high value of the electrochemically active surface area. The electrode reaches 100 mA ⋅ cm by applying only -53 mV vs RHE at 50 °C in 0.5 M HSO, demonstrating excellent electrocatalytic activity for the HER and outstanding stability in acidic electrolyte. Furthermore, the feasibility of these electrodes for industrial application is evaluated using a PEM electrolyzer. The developed prototype with a cathodic area of 1.8 cm shows a very promising performance, reaching 14.9 mmol H ⋅ h ⋅ cm (corresponding to 800 mA ⋅ cm) at a voltage of only 2.1 V.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cobalt-Iron Oxyhydroxide Obtained from the Metal Phosphide, A Highly Effective Electrocatalyst for the Oxygen Evolution Reaction at High Current Densities

  • Díez-García, María Isabel|||0000-0001-9939-8642
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Botifoll, Marc|||0000-0002-4876-6393
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Qamar, Mohammad|||0000-0002-5351-9872
  • Morante, Joan Ramon|||0000-0002-4981-4633
The development of high current density anodes for the oxygen evolution reaction (OER) is fundamental to manufacturing practical and reliable electrochemical cells. In this work, we have developed a bimetallic electrocatalyst based on cobalt-iron oxyhydroxide that shows outstanding performance for water oxidation. Such a catalyst is obtained from cobalt-iron phosphide nanorods that serve as sacrificial structures for the formation of a bimetallic oxyhydroxide through phosphorous loss concomitantly to oxygen/hydroxide incorporation. CoFeP nanorods are synthesized using a scalable method using triphenyl phosphite as a phosphorous precursor. They are deposited without the use of binders on nickel foam to enable fast electron transport, a highly effective surface area, and a high density of active sites. The morphological and chemical transformation of the CoFeP nanoparticles is analyzed and compared with the monometallic cobalt phosphide in alkaline media and under anodic potentials. The resulting bimetallic electrode presents a Tafel slope as low as 42 mV dec and low overpotentials for OER. For the first time, an anion exchange membrane electrolysis device with an integrated CoFeP-based anode was tested at a high current density of 1 A cm, demonstrating excellent stability and Faradaic efficiency near 100%. This work opens up a way for using metal phosphide-based anodes for practical fuel electrosynthesis devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Semiconductor nanosheets for electrocatalytic self-coupling of benzaldehyde to hydrobenzoin

  • Gong, Li
  • Zhang, Chao Yue
  • Mu, Xiao
  • Han, Xu|||0000-0001-8319-8830
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Jin Yuan
  • Kallio, Tanja|||0000-0001-6671-8582
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical reduction of biomass-derived feedstocks provides a sustainable platform for the synthesis of a wide range of chemical commodities and biofuels. Despite their interest, the optimization of reaction conditions, the screening of electrode materials, and the mechanistic understanding of these processes lag well behind other chemical routes. Here, we focus on the electrochemical self-coupling of benzaldehyde (BZH) to hydrobenzoin (HDB) using semiconductor electrocatalysts with nanosheet morphologies. By testing several semiconductor materials, a correlation is observed between their band gap and the electrochemical potential necessary to maximize selectivity towards HDB in alkaline medium, which we associate with the charge accumulation at the semiconductor surface. N-type CuInS provides the highest conversion rate at 0.3 mmol cmh with a selectivity of 98.5 % at -1.3 V vs. Hg/HgO. Additional density functional theory calculations demonstrate a lower kinetic energy barrier at the CuInS surface compared with graphitic carbon, proving its catalytic role in the self-coupling reaction of BZH.
Scientia. Dipòsit d'Informació Digital del Departament de Salut
Publicación Artículo científico (JournalArticle)

Seminal Microbiota of Idiopathic Infertile Patients and Its Relationship With Sperm DNA Integrity

  • Closa Gil, Laia
  • Hobeich, Carlos
  • Castel, Ana Belén
  • Vidal Pérez, Francisco
  • Garcia Martínez, Iris
  • Garcia Segura, Sergio
  • del Rey Azpiri, Javier
Oxidative stress; Seminal microbiome; Sperm dna damage, Estrés oxidativo; Microbioma seminal; Daño en el ADN de los espermatozoides, Estrès oxidatiu; Microbioma seminal; Dany a l'ADN dels espermatozoides, The development of new biomarkers for human male infertility is crucial to improve the diagnosis and the prognosis of this disease. Recently, seminal microbiota was shown to be related to sperm quality parameters, suggesting an effect in human fertility and postulating it as a biomarker candidate. However, its relationship to sperm DNA integrity has not been studied yet. The aim of the present study is to characterize the seminal microbiota of a western Mediterranean population and to evaluate its relationship to sperm chromatin integrity parameters, and oxidative stress. For that purpose, 14 samples from sperm donors and 42 samples from infertile idiopathic patients were obtained and were analyzed to assess the composition of the microbiota through full-length 16S rRNA gene sequencing (Illumina MiSeq platform). Microbial diversity and relative abundances were compared to classic sperm quality parameters (macroscopic semen parameters, motility, morphology and concentration), chromatin integrity (global DNA damage, double-stranded DNA breaks and DNA protamination status) and oxidative stress levels (oxidation-reduction potential). The seminal microbiota observed of these samples belonged to the phyla Firmicutes, Proteobacteria, Actinobacteria and Bacteroidetes. The most abundant genera were Finegoldia, Peptoniphilus, Anaerococcus, Campylobacter, Streptococcus, Staphylococcus, Moraxella, Prevotella, Ezakiella, Corynebacterium and Lactobacillus. To our knowledge, this is the first detection of Ezakiella genus in seminal samples. Two clusters of microbial profiles were built based on a clustering analysis, and specific genera were found with different frequencies in relation to seminal quality defects. The abundances of several bacteria negatively correlate with the sperm global DNA fragmentation, most notably Moraxella, Brevundimonas and Flavobacterium. The latter two were also associated with higher sperm motility and Brevundimonas additionally with lower oxidative-reduction potential. Actinomycetaceae, Ralstonia and Paenibacillus correlated with reduced chromatin protamination status and increased double-stranded DNA fragmentation. These effects on DNA integrity coincide in many cases with the metabolism or enzymatic activities of these genera. Significant differences between fertile and infertile men were found in the relative presence of the Propionibacteriaceae family and the Cutibacterium, Rhodopseudomonas and Oligotropha genera, which supports its possible involvement in male fertility. Our findings sustain the hypothesis that the seminal microbiome has an effect on male fertility., This research was funded by the European Regional Development Fund and Instituto de Salud Carlos III (Economy, Industry and Competitiveness Ministry, Madrid, Spain; Project PI14/00119) and Generalitat de Catalunya (2017SGR1796). Supported by the European Union’s Horizon 2020 Research and Innovation scheme under the Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY; TECSPR-19-1-0003, to JR-M).