Pasar al contenido principal

DISPOSITIVOS ELECTRONICOS DESECHABLES EN PAPEL PARA PLATAFORMAS ECO-SOSTENIBLES

RTI2018-102070-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monotype Organic Dual Threshold Voltage Using Different OTFT Geometries

  • Arnal, August
  • Martínez-Domingo, Carmen
  • Ogier, Simon
  • Terés, Lluís
  • Ramón, Eloi
© The Author(s)., It is well known that organic thin film transistor (OTFT) parameters can be shifted depending on the geometry of the device. In this work, we present two different transistor geometries, interdigitated and Corbino, which provide differences in the key parameters of devices such as threshold voltage (VT), although they share the same materials and fabrication procedure. Furthermore, it is proven that Corbino geometries are good candidates for saturation-mode current driven devices, as they provide higher ION/IOFF ratios. By taking advantage of these differences, circuit design can be improved and the proposed geometries are, therefore, particularly suited for the implementation of logic gates. The results demonstrate a high gain and low hysteresis organic monotype inverter circuit with full swing voltage at the output, This research was funded by MICIU-Spain, grant number RTI2018–102070-B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A complete compact model for simulation of organic electronic systems

  • Arnal, August
  • Martínez-Domingo, Carmen
  • Terés, Lluís
  • Ramón, Eloi
Organic Electronics provides multiple technological advantages such as low cost, flexibility, solution processability and waste reduction through the use of new materials and alternative fabrication techniques in the microelectronic world. The use of additive and printed fabrication processes allows the development of instantly fabricated, fully additive, low temperature processing together with lightweight, bendable, scalable and sustainable systems. Different models have been presented in the field but none of them with an industrial implementation. Complete simulation models are very useful for circuit production and commercialization since the organic electronics market is expected to grow in the near future and the need for industrial solutions for designers will increase. For this reason and for the first time, we present a compact model of DC and AC behaviour combined with different ambient conditions and parameter variability for full organic electronic system simulations., This work was supported by MICIU-Spain (RTI2018-102070-B-C21), MICIU-Spain (RTC2019-007226-7), Marie Skłodowska-Curie No 801342 (Tecniospring INDUSTRY), NeuDrive Ltd. (UK) for providing the devices and circuits manufactured., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Temperature Plasma Sintering of Inkjet-Printed Metal Salt Decomposition Inks on Flexible Substrates

  • Leung, Tammy Sue Wuen
  • Ramón, Eloi
  • Martínez-Domingo, Carmen
Due to their complex formulation, conductive nanoparticle inks for inkjet printing are limited in terms of the types of metals and substrates that can be utilized. A new and simplified class of inks called metal salt decomposition (MSD) inks has the potential to introduce a multitude of metals, which can be printed directly onto a wide range of substrates. Here, the use of atmospheric oxygen plasma to develop polycrystalline Au and Pt films at processing temperatures near room temperature (≈33 °C) with excellent conductivities up to 105 S m−1 is demonstrated. The conformal nature of the ink allows metal films to be printed onto a broad range of temperature-sensitive substrates including polymers, papers, and fabric. The Au ink is then used to build a simple light-emitting diode circuit showing its flexibility, durability, and long-term stability as deposited thin metal films. Additionally, such inks cost less than one-third the price of similar nanoparticle inks highlighting their overall affordability and good stability., This project was made possible by MCIU/AEI/FEDER Funding agency (RTI2018-102070-B-C21) under the name ECOTRONIC, and MICINN-Spain (RTC2019-007226-7). C.M-D acknowledges her Juan de la Cierva grant (ref. FJC2019-042161-I) from Ministerio de Ciencia e Innovación. All authors would like to thank Prof. Fabiola Vilaseca Morera at the University of Girona (UdG) and her students for graciously providing various CNF paper substrates derived from cellulose pulp, eucalyptus, and abaca. Additionally, the authors would like to extend gratitude to David Batet for providing Teslin + CNF samples., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Programmable organic chipless rfid tags inkjet printed on paper substrates

  • Moras, Miquel
  • Martínez-Domingo, Carme
  • Escudé, Roger
  • Herrojo, Cristian
  • Paredes, Ferran
  • Terés, Lluís
  • Martín, Ferran
  • Ramon, Eloi
In this paper, an organic, fully recyclable and eco-friendly 20-bit inkjet-printed chipless RFID tag is presented. The tag operates in the near field and is implemented by means of chains of resonant elements. The characterization and manufacturing process of the tag, printed with a few layers of a commercial organic ink on conventional paper substrate (DIN A4), are presented, and tag functionality is demonstrated by reading it by means of a custom-designed reader. The tags are read by proximity (through the near field), by displacing them over a resonator-loaded transmission line, and each resonant element (bit) of the tag is interrogated by a harmonic signal tuned to the resonance frequency. The coupling between the reader line and the resonant elements of the tag produce and amplitude modulated (AM) signal containing the identification (ID) code of the tag., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental overview for green printed electronics: inks, substrates, and printing techniques

  • Batet, David
  • Vilaseca, Fabiola
  • Ramon, Eloi
  • Esquivel Bojórquez, Juan Pablo
  • Gabriel, Gemma
The selection of materials and technologies for green printed electronics design is a fundamental and time-consuming task. This paper represents a rigorous experimental overview in which different printing technologies, ink formulations, and paper-based substrates are examined and analyzed. Three printing techniques are investigated: inkjet printing, screen printing, and direct ink writing. Regarding the inks, formulations based on carbon and silver have been chosen as conductive materials. Initially, the electrical properties of the selected inks have been characterized on a conventional substrate in printed electronics such as polyethylene terephthalate. Later, the printing conditions are optimized for various paper-based substrates, including commercial papers and substrates based on cellulose nanofibers (CNF). CNF are also used as a coating for commercial papers and their influence on the printing quality is evaluated. The substrates are also characterized in terms of morphology, wettability, and thermal stability. This study facilitates the benchmarking tasks for researchers developing new devices and contributes toward the eco-design of flexible green printed electronics., The authors acknowledge financial support provided by project ECOTRONIC (RTI2018-102070-B-C21, MCIN), with funds from the Spanish government (Ministerio de Ciencia e Innovación) and the project CEL-SENS (TED2021-132164B-C22) with funds from MCIN/AEI/10.13039/501100011033 and the European Union ‘NextGenerationEU’/PRTR. D B also acknowledges the support provided by FPI PhD fellowships (PRE2019-090103). The authors would also like to acknowledge the contribution of Marc Balsells, who conducted some of the experimental work. The authors also thank the support of the SU-8 Unit of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) at the IMB-CNM (CSIC) of ICTS ‘NANBIOSIS.’ This work also made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Salivary Cortisol Detection with a Fully Inkjet-Printed Paper-Based Electrochemical Sensor

  • Zea, Miguel
  • Ben Halima, Hamdi
  • Villa, Rosa
  • Nemeir, Imad Abrao
  • Zine, Nadia
  • Errachid, Abdelhamid
  • Gabriel, Gemma
Electrochemical paper-based analytical devices (ePADs) offer an innovative, low-cost, and environmentally friendly approach for real-time diagnostics. In this study, we developed a functional all-inkjet paper-based electrochemical immunosensor using gold (Au) printed ink to detect salivary cortisol. Covalent binding of the cortisol monoclonal antibody onto the printed Au surface was achieved through electrodeposition of 4-carboxymethylaniline (CMA), with ethanolamine passivation to prevent non-specific binding. The ePAD exhibited a linear response within the physiological cortisol range (5–20 ng/mL), with sensitivities of 25, 23, and 19 Ω·ng/mL and R2 values of 0.995, 0.979, and 0.99, respectively. Additionally, interference studies against tumor necrosis factor-α (TNF-α) and N-terminal pro-B-type natriuretic peptide (NT-proBNP) yielded excellent results. This novel ePAD, fabricated using inkjet printing technology on paper, simplifies the process, reduces environmental impact, and lowers fabrication costs., M.Z. would like to acknowledge his financial support covered by Fundación Centro de Estudios Interdisciplinarios Básicos y Aplicados (CEIBA)-Gobernación de Bolivar (Colombia). This work was supported by the Spanish government-funded project RTI2018-096786-B-I00, and RTI2018-102070-B-C21 by Ministerio de Ciencia, Innovación y Universidades (MINECO/FEDER, EU). The authors also want to thank the support of the Generalitat de Catalunya for 2017-SGR-988, and the SU-8 Unit of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) at the IMB-CNM (CSIC) of ICTS “NANBIOSIS”. This work has also made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM. This work was also partially supported by the EU H2020 research and innovation program KardiaTool with agreement Nº 768686, POC Allergies through the ERA PerMed program, and from CAMPUS FRANCE program agreement PHC PROCOPE 40544QH., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical sensors for cortisol detections: Almost there

  • Zea, Miguel
  • Bellagambi, Francesca G.
  • Ben Halima, Hamdi
  • Zine, Nadia
  • Jaffrezic-Renault, Nicole
  • Villa, Rosa
  • Gabriel, Gemma
  • Errachid, Abdelhamid
Mostly known as “the stress hormone”, cortisol has many essential functions in humans due to its involvement in regulation of blood pressure, immune system, metabolism of protein, carbohydrate, adipose, and anti-inflammatory action. Since a right cortisol balance is essential for human health, many efforts are currently being made to monitor the cortisol level in the human body. Cortisol levels are usually monitored in blood, plasma, serum, oral fluid, sweat, and hair samples through immunochemical and analytical methods, but in the last decade, electrochemical measurements are proving to be reliable techniques for cortisol quantification in biological matrices with the advantages of a fast response by portable and wearable devices. This review gathers the most recent developments and works on electrochemical sensors for cortisol detection, highlighting their high technology maturity and potential for clinical applications., M. Zea would like to acknowledge his financial support covered by Fundación Centro de Estudios Interdisciplinarios Básicos y Aplicados (CEIBA)-Gobernación de Bolivar (Colombia). This work was supported by the Spanish government-funded project RTI2018-096786-B-I00, and RTI2018-102070-B-C21 by Ministerio de Ciencia, Innovación y Universidades (MINECO/FEDER, EU). The authors also want to thank the support of the Generalitat de Catalunya to 2017-SGR-988, and the SU-8 Unit of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) at the IMB-CNM (CSIC) of ICTS “NANBIOSIS.” This work has also made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM. This work was also partially supported by the EU H2020 research and innovation program KardiaTool with agreement Nº 768686 and from CAMPUS FRANCE program agreement PHC PROCOPE 40544QH., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Specially Designed Polyaniline/Polypyrrole Ink for a Fully Printed Highly Sensitive pH Microsensor

  • Zea, Miguel
  • Texidó, Robert
  • Villa, Rosa
  • Borrós, Salvador
  • Gabriel, Gemma
pH sensing for healthcare applications requires sensors with mechanically stable materials of high sensitivity and high reproducibility combined with low-cost fabrication technologies. This work proposes a fully printed pH sensor based on a specially formulated conducting polymer deposited on a microelectrode in a flexible substrate. A formulation, which combined polyaniline (PANI) and polypyrrole (PPy) with integrated polyelectrolyte poly(sodium 4-styrenesulfonate) (PSS), was specially prepared to be printed by inkjet printing (IJP). The sensor has good sensitivity in the physiological region (pH 7-7.5) key for the healthcare biosensor. This mixture printed over a commercial gold ink, which has a singular chemical functionalization with phthalocyanine (Pc), increased the sensor sensitivity, showing an excellent reproducibility with a linear super-Nernstian response (81.2 ± 0.5 mV/pH unit) in a wide pH range (pH 3-10). This new ink together with the IJP low-cost technique opens new opportunities for pH sensing in the healthcare field with a single device, which is disposable, highly sensitive, and stable in the whole pH range., M.Z. acknowledges his financial support covered by Fundación Centro de Estudios Interdisciplinarios Básicos y Aplicados (CEIBA)-Gobernación de Bolivar (Colombia). This work was supported by the Spanish government-funded projects RTI2018-096786-B-I00 and RTI2018-102070-B-C21 by Ministerio de Ciencia, Innovación y Universidades (MINECO/FEDER, EU). The authors also thank the support of the Generalitat de Catalunya to 2017-SGR-988 and to 2017-SGR 1559 and the SU-8 Unit of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) at the IMB-CNM (CSIC) of ICTS “NANBIOSIS.” This work has also made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green Electrochemical Point-of-Care Devices: Transient Materials and Sustainable Fabrication Methods

  • Batet, David
  • Gabriel, Gemma
The spread of point-of-care (PoC) diagnostic tests using electrochemical sensors poses a significant environmental challenge, especially in limited-resource settings due to the lack of waste management infrastructure. This issue is expected to intensify with the emergence of the Internet of Medical Things (IoMT), necessitating eco-friendly solutions for disposable devices. This review discusses efforts to develop green and sustainable PoC diagnostic devices, clarifying terms like biodegradability and transient electronics. It explores potential transient and biodegradable materials and fabrication technologies, emphasizing sustainable electronics with low-energy consumption and low-carbon footprint techniques, particularly favoring printing methods. The review highlights examples of necessary electronic components containing biodegradable materials for electrochemical PoC devices and discusses their role in device sustainability. Finally, it examines the feasibility of integrating these components and technologies into comprehensive biodegradable PoC devices, addressing the imminent need for eco-friendly solutions in diagnostic testing. This comprehensive discussion serves as a guide for researchers and developers striving to mitigate the environmental impact of PoC testing in the era of IoMT and personalized medicine., Funding text 1 The authors thank the help provided by J.P. Esquivel. The authors acknowledge financial support provided by the project CEL-SENS (TED2021\u2013132164B-C22) with funds from MCIN/AEI/10.13039/501100011033 and the European Union \u2032NextGenerationEU\u2032/PRTR and the project ECOTRONIC (RTI2018\u2013102070-B-C21, MCIN) with funds from the Ministerio de Ciencia e Innovaci\u00F3n of the Spanish Government. D B also acknowledges the support provided by FPI PhD fellowships (PRE2019\u2013090103). The authors also thank the support of the SU-8 Unit of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) at the IMB-CNM (CSIC) of ICTS \u2032NANBIOSIS.\u2032 This work also made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM. Funding text 2 The authors thank the help provided by J.P. Esquivel. The authors acknowledge financial support provided by the project CEL\u2010SENS (TED2021\u2013132164B\u2010C22) with funds from MCIN/AEI/10.13039/501100011033 and the European Union \u2032NextGenerationEU\u2032/PRTR and the project ECOTRONIC (RTI2018\u2013102070\u2010B\u2010C21, MCIN) with funds from the of the Spanish Government. D B also acknowledges the support provided by FPI PhD fellowships (PRE2019\u2013090103). The authors also thank the support of the SU\u20108 Unit of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER\u2010BBN) at the IMB\u2010CNM (CSIC) of ICTS \u2032NANBIOSIS.\u2032 This work also made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM. Ministerio de Ciencia e Innovaci\u00F3n, Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Organic-based field effect transistors for protein detection fabricated by inkjet-printing

  • Martinez Domingo, Carme|||0000-0002-1897-5362
  • Conti, Silvia
  • De La Escosura-Muñiz, Alfredo|||0000-0002-9600-0253
  • Terés, Lluís
  • Merkoçi, Arben|||0000-0003-2486-8085
  • Ramon, Eloi|||0000-0001-9974-8112
Biosensors based on Organic Field-Effect Transistors (OFETs) have attracted increasing attention due to the possibility of rapid, label-free, and inexpensive detection. Among all the different possibilities, inkjet-printed top-gate organic Field Effect Transistors-Based Biosensors (BioFETs) using a polymeric gate insulator have been seldom reported. In this work, a systematic investigation in terms of topographical and electrical characterization was carried out in order to find the optimal fabrication process for obtaining a reliable polymer insulator. Previous studies have demonstrated that the best electrical performance arises from the use of the perfluoropolymer Cytop™[12,13,14]. Consequently, a simple immobilization protocol was used to ensure the proper attachment of a model biomolecule onto the Cytop's hydrophobic surface whilst keeping its remarkable insulating properties with gate current in the range of dozens of pico-amperes. The top-gate inkjet-printed BioFETs presented in this study operate at threshold voltages in the range of 1-2 V and show durability even when exposed to oxygen plasma, wet amine functionalization treatments, and aqueous media. As a preliminary application, the inkjet-printed top-gate BioFETs is used for monitoring an immunoreaction by measuring changes in the drain current, paving the way for further use of this device in the immunosensing field.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

DC characterization and fast small-signal parameter extraction of organic thin film transistors with different geometries

  • Nafria, Montserrat|||0000-0002-9549-2890
  • Crespo-Yepes, A.|||0000-0003-4618-651X
  • Rodriguez, R.|||0000-0002-4565-6703
  • Arnal Rus, August|||0000-0002-3425-1057
  • Ramon, Eloi|||0000-0001-9974-8112
  • Terés Terés, Lluís|||0000-0002-9263-411X
Organic Devices offer low-cost manufacturing and better flexibility, sustainability and solution-processability than their Si-based MOS counterparts, which make them suitable for new applications where those characteristics are an advantage. However, organic device performance is still far from that provided by CMOS technology and many issues are still unclear. In this work, a performance comparison is made between Interdigitated and Corbino geometries of Organic Thin Film Transistors (OTFT), with different areas but fabricated with identical stack materials and techniques. To this end, I-V characteristics and C-V curves of the OTFTs were measured and a Common-Source circuit was proposed and implemented for extracting relevant electrical parameters of the devices, through a standard small signal analysis. The parameter extraction methodology in the frequency domain proposed allows rapid testing of the device/circuit performance of this technology, which for the first time is applied to organic devices. Results show that despite the large voltages, organic transistors exhibit similar channel dimension dependencies to MOS devices and can be also described by the same small signal model.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Specially Designed Polyaniline/Polypyrrole Ink for a Fully Printed Highly Sensitive pH Microsensor

  • Zea, Miguel
  • Texidó, Robert
  • Villa, Rosa|||0000-0003-2735-3204
  • Borrós, Salvador|||0000-0002-4003-0381
  • Gabriel, Gemma|||0000-0003-2140-6299
pH sensing for healthcare applications requires sensors with mechanically stable materials of high sensitivity and high reproducibility combined with low-cost fabrication technologies. This work proposes a fully printed pH sensor based on a specially formulated conducting polymer deposited on a microelectrode in a flexible substrate. A formulation, which combined polyaniline (PANI) and polypyrrole (PPy) with integrated polyelectrolyte poly(sodium 4-styrenesulfonate) (PSS), was specially prepared to be printed by inkjet printing (IJP). The sensor has good sensitivity in the physiological region (pH 7-7.5) key for the healthcare biosensor. This mixture printed over a commercial gold ink, which has a singular chemical functionalization with phthalocyanine (Pc), increased the sensor sensitivity, showing an excellent reproducibility with a linear super-Nernstian response (81.2 ± 0.5 mV/pH unit) in a wide pH range (pH 3-10). This new ink together with the IJP low-cost technique opens new opportunities for pH sensing in the healthcare field with a single device, which is disposable, highly sensitive, and stable in the whole pH range.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Programmable Organic Chipless RFID Tags Inkjet Printed on Paper Substrates

  • Moras Albero, Miquel|||0000-0003-3397-2730
  • Martinez Domingo, Carme|||0000-0002-1897-5362
  • Escude Pujol, Roger|||0000-0002-0780-8104
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Terés Terés, Lluís|||0000-0002-9263-411X
  • Martín, Ferran|||0000-0002-1494-9167
  • Ramon, Eloi|||0000-0001-9974-8112
In this paper, an organic, fully recyclable and eco-friendly 20-bit inkjet-printed chipless RFID tag is presented. The tag operates in the near field and is implemented by means of chains of resonant elements. The characterization and manufacturing process of the tag, printed with a few layers of a commercial organic ink on conventional paper substrate (DIN A4), are presented, and tag functionality is demonstrated by reading it by means of a custom-designed reader. The tags are read by proximity (through the near field), by displacing them over a resonator-loaded transmission line, and each resonant element (bit) of the tag is interrogated by a harmonic signal tuned to the resonance frequency. The coupling between the reader line and the resonant elements of the tag produce and amplitude modulated (AM) signal containing the identification (ID) code of the tag.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High data density near-field chipless-RFID tags with synchronous reading

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Escude Pujol, Roger|||0000-0002-0780-8104
  • Ramon, Eloi|||0000-0001-9974-8112
  • Martín, Ferran|||0000-0002-1494-9167
Near-field chipless-RFID tags with high data density and synchronous reading capability are presented and experimentally validated in this paper. The tags consist of a chain of rectangular patches etched or printed at predefined positions on a dielectric substrate, including rigid or flexible (i.e., plastic or even paper) substrates. Patch dimensions determine the binary state, where the larger and smaller patches are associated with the logic '1' and '0' states, respectively, or vice versa. For sequentially and synchronously reading the bits, a sensitive element able to determine the presence of the patches and their size by proximity (through near field using microwaves) is considered. Such element is a microstrip line loaded with a pair of rectangular complementary split ring resonators (CSRRs), one etched inside the other in the ground plane. When the tag chain is displaced at short distance over the CSRRs, the larger patches modify the resonance frequency of both sensing CSRRs, whereas the lower patches do only alter the resonance frequency of the smaller CSRR. Consequently, the ID code is contained in the patch dimensions, and the presence of a patch (regardless of its size) determines the reading times (clock signal), necessary for synchronous reading. Tag reading in this system proceeds by feeding the CSRR-loaded line (reader) with a pair of harmonic signals tuned to the resonance frequencies of the bare CSRRs. Both signals are amplitude modulated (AM) at the output port as consequence of tag motion, and the respective envelope functions contain both the clock signal and the tag ID code. The ID codes of several 16-bit tags, implemented on different substrates (microwave substrate, plastic and paper) and exhibiting a per unit length density of 1.67 bit/cm, have been inferred with the dedicated reader for validation purposes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A plant-like battery, a biodegradable power source ecodesigned for precision agriculture

  • Navarro-Segarra, Marina
  • Tortosa, Carles
  • Ruiz-Díez, Carlos
  • Desmaële, Denis
  • Gea, Teresa|||0000-0003-2523-4797
  • Barrena, Raquel|||0000-0002-6077-7765
  • Sabaté Vizcarra, Neus|||0000-0002-4513-7057
  • Esquivel, Juan Pablo|||0000-0002-3181-3077
The natural environment has always been a source of inspiration for the research community. Nature has evolved over thousands of years to create the most complex living systems, with the ability to leverage inner and outside energetic interactions in the most efficient way. This work presents a flow battery profoundly inspired by nature, which mimics the fluid transport in plants to generate electric power. The battery was ecodesigned to meet a life cycle for precision agriculture (PA) applications; from raw material selection to disposability considerations, the battery is conceived to minimize its environmental impact while meeting PA power requirements. The paper-based fluidic system relies on evaporation as the main pumping force to pull the reactants through a pair of porous carbon electrodes where the electrochemical reaction takes place. This naturally occurring transpiration effect enables to significantly expand the operational lifespan of the battery, overcoming the time-limitation of current capillary-based power sources. Most relevant parameters affecting the battery performance, such as evaporation flow and redox species degradation, are thoroughly studied to carry out device optimization. Flow rates and power outputs comparable to those of capillary-based power sources are achieved. The prototype practicality has been demonstrated by powering a wireless plant-caring device. Standardized biodegradability and phytotoxicity assessments show that the battery is harmless to the environment at the end of its operational lifetime. Placing sustainability as the main driver leads to the generation of a disruptive battery concept that aims to address societal needs within the planetary environmental boundaries. A biodegradable battery inspired by the transpiration pull of liquids in plants has been ecodesigned to power wireless sensors and then be safely biodegraded or composted, resembling the way a plant comes back to nature at the end of its lifecycle.