Pasar al contenido principal

NANOCOMPUESTOS CONDUCTORES DE CELULOSA PARA CIRCUITOS ELECTRONICOS, BATERIAS Y SENSORES MAS SOSTENIBLES

RTI2018-102070-B-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Green Electrochemical Point-of-Care Devices: Transient Materials and Sustainable Fabrication Methods

  • Batet, David
  • Gabriel, Gemma
The spread of point-of-care (PoC) diagnostic tests using electrochemical sensors poses a significant environmental challenge, especially in limited-resource settings due to the lack of waste management infrastructure. This issue is expected to intensify with the emergence of the Internet of Medical Things (IoMT), necessitating eco-friendly solutions for disposable devices. This review discusses efforts to develop green and sustainable PoC diagnostic devices, clarifying terms like biodegradability and transient electronics. It explores potential transient and biodegradable materials and fabrication technologies, emphasizing sustainable electronics with low-energy consumption and low-carbon footprint techniques, particularly favoring printing methods. The review highlights examples of necessary electronic components containing biodegradable materials for electrochemical PoC devices and discusses their role in device sustainability. Finally, it examines the feasibility of integrating these components and technologies into comprehensive biodegradable PoC devices, addressing the imminent need for eco-friendly solutions in diagnostic testing. This comprehensive discussion serves as a guide for researchers and developers striving to mitigate the environmental impact of PoC testing in the era of IoMT and personalized medicine., Funding text 1 The authors thank the help provided by J.P. Esquivel. The authors acknowledge financial support provided by the project CEL-SENS (TED2021\u2013132164B-C22) with funds from MCIN/AEI/10.13039/501100011033 and the European Union \u2032NextGenerationEU\u2032/PRTR and the project ECOTRONIC (RTI2018\u2013102070-B-C21, MCIN) with funds from the Ministerio de Ciencia e Innovaci\u00F3n of the Spanish Government. D B also acknowledges the support provided by FPI PhD fellowships (PRE2019\u2013090103). The authors also thank the support of the SU-8 Unit of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) at the IMB-CNM (CSIC) of ICTS \u2032NANBIOSIS.\u2032 This work also made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM. Funding text 2 The authors thank the help provided by J.P. Esquivel. The authors acknowledge financial support provided by the project CEL\u2010SENS (TED2021\u2013132164B\u2010C22) with funds from MCIN/AEI/10.13039/501100011033 and the European Union \u2032NextGenerationEU\u2032/PRTR and the project ECOTRONIC (RTI2018\u2013102070\u2010B\u2010C21, MCIN) with funds from the of the Spanish Government. D B also acknowledges the support provided by FPI PhD fellowships (PRE2019\u2013090103). The authors also thank the support of the SU\u20108 Unit of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER\u2010BBN) at the IMB\u2010CNM (CSIC) of ICTS \u2032NANBIOSIS.\u2032 This work also made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM. Ministerio de Ciencia e Innovaci\u00F3n, Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Strong Polyamide-6 Nanocomposites with Cellulose Nanofibers Mediated by Green Solvent Mixtures

  • Sridhara, Pruthvi K.
  • Massó, Ferran
  • Olsén, Peter
  • Vilaseca Morera, Fabiola
Cellulose nanofiber (CNF) as a bio-based reinforcement has attracted tremendous interests in engineering polymer composites. This study developed a sustainable approach to reinforce polyamide-6 or nylon-6 (PA6) with CNFs through solvent casting in formic acid/water mixtures. The methodology provides an energy-efficient pathway towards well-dispersed high-CNF content PA6 biocomposites. Nanocomposite formulations up to 50 wt.% of CNFs were prepared, and excellent improvements in the tensile properties were observed, with an increase in the elastic modulus from 1.5 to 4.2 GPa, and in the tensile strength from 46.3 to 124 MPa. The experimental tensile values were compared with the analytical values obtained by micromechanical models. Fractured surfaces were observed using scanning electron microscopy to examine the interface morphology. FTIR revealed strong hydrogen bonding at the interface, and the thermal parameters were determined using TGA and DSC, where the nanocomposites’ crystallinity tended to reduce with the increase in the CNF content. In addition, nanocomposites showed good thermomechanical stability for all formulations. Overall, this work provides a facile fabrication pathway for high-CNF content nanocomposites of PA6 for high-performance and advanced material applications, This research was funded by the Biocomposites Program within the Knut and Alice Wallenberg Foundation (Sweden), a UdG grant (IFUdG 2017), Spain, and a three-month research grant from KTH (C2019-1106), Sweden. Support from the Spanish Ministry of Science, Innovation and Universities (RTI 2018-102070-B-C22) is also acknowledged
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High Performance PA 6/Cellulose Nanocomposites in the Interest of Industrial Scale Melt Processing

  • Sridhara, Pruthvi K.
  • Vilaseca Morera, Fabiola
On an industrial scale, it is a challenge to achieve cellulose based nanocomposites due to dispersion issues and high process temperatures sensitivity. The current study describes methods to develop mechanically strong and thermally stable polyamide 6 (PA 6) and cellulose nanofibers (CNF) composites capable of tolerating high processing temperatures. With PA 6 being a very technical polymer matrix to be reinforced with CNF, good dispersion can be achieved with a high speed kinetic mixer and also shield the CNF from excess thermal degradation by implementing extremely short processing time. This paper presents an industrially feasible method to produce PA 6/CNF nanocomposites with high CNF composition processed by a high speed kinetic mixer (GELIMAT®) followed by compression molding to obtain a homogenous and thermally stable nanocomposites aimed at high performance applications. PA 6 was reinforced with three different wt % formulations (5, 15 and 25 wt %) of cellulose nanofibers. The resulting nanocomposites exhibited significant increase in Young’s modulus and ultimate strength with CNF content, owing to the effective melt processing and the surface charge density of the CNF, which necessitated the dispersion. The thermal stability and polymer crystallinity with respect to CNF composition for the PA 6/CNF nanocomposites were examined by TGA and DSC analysis. Rheology studies indicated that viscosity of the composites increased with increase in CNF composition. Overall, this work demonstrates industrially viable manufacturing processes to fabricate high performance PA 6/CNF nanocomposites, This research was funded by the Wallenberg Wood Science Institute—KTH (KAW 2018.0451, Sweden) in Sweden, the by UdG grant (IFUdG 2017) in Spain, and by the Spanish Ministry of Science, Innovation and Universities (RTI 2018-102070-B-C22)