Pasar al contenido principal

DISEÑO Y SINTESIS DE COMPONENTES DE RF/MICROONDAS BASADOS EN CONCEPTOS AVANZADOS Y SU APLICACION A CIRCUITOS DE COMUNICACIONES, SENSORES Y RFID (II)

TEC2016-75650-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 51
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Frequency-scanning leaky-wave slot antenna array based on serpentine waveguide with open stopband suppression

  • Jaque Jimenez, Alvaro-Patricio|||0000-0002-3947-0953
  • Zamora, Gerard|||0000-0001-6609-8643
  • Bonache, Jordi|||0000-0002-7225-5737
A periodic leaky-wave antenna with backward-to-forward scanning capability is presented. Two versions of the antenna, one with bidirectional radiation and the other with unidirectional radiation, are introduced. The proposed structure, composed of 30 unit cells, is based on a meandered rectangular waveguide loaded with transverse radiating slots. Effective suppression of the open stopband is achieved allowing for efficient broadside radiation at 5 GHz. Measured and simulated S-parameters, radiation pattern, and gain are reported. The experimental results demonstrate a backward-to-forward scanning capability from -35° to 42° for both the unidirectional and bidirectional versions, with a maximum measured gain of 15.5 and 16.5 dB, respectively.
Dipòsit Digital de Documents de la UAB
Publicación Libro o Monografía (Book)

Time-Domain Signature Barcodes for Chipless-RFID and Sensing Applications

  • Martín, Ferran|||0000-0002-1494-9167
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
This book presents an unconventional approach for implementing chipless radiofrequency identification (RFID) systems and related sensors. Contrary to most state-of-the-art chipless-RFID systems, the proposed approach is based on time domain and the tags are read through near field. The book discusses different aspects of these chipless-RFID systems, including tag and reader design, strategies to enhance the data density and capacity, tag programming and erasing, tag implementation in plastic and paper substrates, and synchronous tag reading, among others. A tolerance analysis and validation of the different systems, as well as prospective applications, are also included. The book also offers a comprehensive overview of the state-of-the-art in chipless-RFID technology, including a comparative analysis, which is extended also to chip-based RFID systems. Readers are expected to be familiar with RF/microwave engineering technology. Besides master's and postgraduate students, the book is intended for researchers in the field of radiofrequency identification (RFID) technology, and may be of interest for engineers working in the areas of wireless communications, automatic identification, security, authentication, microwave and wireless sensors, as well as those dealing with internet of things (IoT) and smart systems.
Dipòsit Digital de Documents de la UAB
Publicación Libro o Monografía (Book)

Planar Microwave Sensors

  • Martín, Ferran|||0000-0002-1494-9167
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
Planar Microwave Sensors is an authoritative resource on the subject, discussing the main relevant sensing strategies, working principles, and applications on the basis of the authors’ own experience and background, while also highlighting the most relevant contributions to the topic reported by international research groups. The authors provide an overview of planar microwave sensors grouped by chapters according to their working principle. In each chapter, the working principle is explained in detail and the specific sensor design strategies are discussed, including validation examples at both simulation and experimental level. The most suited applications in each case are also reported. The necessary theory and analysis for sensor design are further provided, with special emphasis on performance improvement (i.e., sensitivity and resolution optimization, dynamic range, etc.). Lastly, the work covers a number of applications, from material characterization to biosensing, including motion control sensors, microfluidic sensors, industrial sensors, and more.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compact Wideband Balanced Bandpass Filters With Very Broad Common-Mode and Differential-Mode Stopbands

  • Sans, Marc
  • Selga, Jordi
  • Vélez, París
  • Bonache, J.
  • Rodríguez Pérez, Ana María
  • Martin Antonlin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Compact balanced bandpass filters based on a combination of multisection mirrored stepped-impedance resonators and interdigital capacitors are presented in this paper. The considered filter topology is useful to achieve wide bandwidths for the differential mode, with broad stop bands for that mode, as well as very efficient common-mode suppression. By conveniently adjusting the transmission zeros for both operation modes, the differential- and common-mode stopbands can be extended up to significantly high frequencies. Filter size and this differential- and common-mode stopband performance are the main relevant characteristics of the proposed balanced filters. The potential of the approach is illustrated by the design of a prototype order-5 balanced bandpass filter, with central frequency $f_{0} = 1.8$ GHz, 48% fractional bandwidth (corresponding to 55.4% ¿3-dB bandwidth), and 0.04-dB ripple level. The filter is automatically synthesized by means of an aggressive space-mapping software tool, specifically developed, and two (pre- and post-) optimization algorithms, necessary to determine the transmission-zero frequencies. The designed filter is as small as $0.48lambda _{g} times 0.51lambda _{g}$ , where $lambda _{g}$ is the guided wavelength at the central filter frequency, and the differential-mode stopband extends up to at least 6.5 GHz with more than 22-dB rejection. The common-mode suppression is better than 28 dB from dc up to at least 6.5 GHz., This work was supported in part by MINECO-Spain under Project TEC2013-40600-R, Project TEC2016-75650-R, and Project TEC2016-75934-C4-1-R, in part by the Generalitat de Catalunya under Project 2014SGR-157, in part by the Institucio Catalana de Recerca i Estudis Avancats (who awarded F. Martin), and in part by by FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Very Low-Cost 80-Bit Chipless-RFID Tags Inkjet Printed on Ordinary Paper

  • Herrojo, Cristian
  • Moras, Miquel
  • Paredes, Ferran
  • Núñez, Alba
  • Ramón, Eloi
  • Mata-Contreras, Javier
  • Martín, Ferran
This paper presents a time-domain, chipless-RFID system with 80-bit tags inkjet-printed on ordinary DIN A4 paper. The tags, consisting of a linear chain of resonant elements (with as many resonators as the number of identification bits plus header bits), are read sequentially and by proximity (through near-field coupling). To this end, a transmission line, fed by a harmonic (interrogation) signal tuned to the resonance frequency of the tag resonators (or close to it), is used as a reader. Thus, during reader operation, the tag chain is mechanically shifted over the transmission line so that the coupling between the line and the functional resonant elements of the tag chain is favored. Logic states that ‘1’ and ‘0’ are determined by the functionality and non-functionality (resonator detuning), respectively, of the resonant elements of the chain. Through near-field coupling, the transmission coefficient of the line is modulated and, as a result, the output signal is modulated in amplitude (AM), which is the identification code contained in the envelope function. As long as the tags are inkjet-printed on ordinary DIN A4 paper, the cost is minimal. Moreover, such tags can be easily programmed and erased, so that identical tags can be fabricated on a large scale (and programmed at a later stage), further reducing the cost of manufacture. The reported prototype tags, with 80 bits of information plus four header bits, demonstrate the potential of this approach, which is of particular interest to secure paper applications., This work was supported in part by MINECO-Spain under Project TEC2016-75650-R and TEC2014-59679-C2-1-R in part by Generalitat de Catalunya under project 2017SGR-1159, in part by the Institució Catalana de Recerca i Estudis Avançats (who awarded Ferran Martín), and in part by FEDER funds. Cristian Herrojo acknowledges MINECO for supporting his research activity through the FPI grant BES-2014-068164.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Near-field chipless-RFID system with high data capacity for security and authentication applications

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Núñez, Alba|||0000-0003-3529-7986
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Ramon, Eloi|||0000-0001-9974-8112
  • Martín, Ferran|||0000-0002-1494-9167
A high data capacity chipless radio frequency identification (chipless-RFID) system, useful for security and authentication applications, is presented in this paper. Reading is based on the near-field coupling between the tag, a chain of identical split-ring resonators (SRRs) printed on a (typically flexible) dielectric substrate (e.g., liquid crystal polymer, plastic, and paper), and the reader. Encoding is achieved by the presence or absence of SRRs at predefined (equidistant) positions in the chain, and tag identification (ID) is based on sequential bit reading. Namely, the tag must be longitudinally displaced, at short distance, over the reader, a microstrip line loaded with an SRR and fed by a harmonic signal. By this means, the harmonic signal is amplitude modulated, and the (ID) code is contained in the envelope function, which can be obtained by means of an envelope detector. With this system, tag reading requires proximity with the reader, but this is not an issue in many applications within the domain of security and authentication (e.g., secure paper for corporate documents and certificates). Several circularly shaped 40-bit encoders (implemented in a commercial microwave substrate), and the corresponding reader, are designed and fabricated as proof-of-concept demonstrators. Strategies for programming the tags and a first proof-of-concept chipless-RFID tag fabricated on plastic substrate through inkjet printing are included in this paper.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Application of split ring resonator (SRR) loaded transmission lines to the design of angular displacement and velocity sensors for space applications

  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Martín, Ferran|||0000-0002-1494-9167
The accurate measurement of the angular displacement and velocity of reaction wheels is necessary for attitude (orientation) control in space vehicles (satellites). In this paper, microwave, contactless, and low-cost (as compared to optical encoders) sensors useful for that purpose are analyzed in detail. The sensor consists of a rotor and a stator. The rotor is a disk (or a circular crown) of dielectric material, where one or several arrays of equidistant single-loop split ring resonators (SRRs) are etched along its edge, forming circular chains of hundreds of SRRs. The stator is a coplanar waveguide (CPW) also loaded with pairs of single-loop SRRs (etched in the back substrate side), with the centers located in the slot region. The sensing principle is based on the amplitude modulation of a harmonic (single-tone continuous wave) feeding signal, achieved when the chains of the rotor are displaced over the SRR pairs of the stator. Both sensor elements (rotor and stator) must be parallel oriented, with the SRR pairs of the CPW in close proximity to the SRR chains of the rotor (and rotated 180°), in order to favor their coupling. By this means, the transmission coefficient of the CPW is varied by the circular motion of the rotor, and significant amplitude modulation of the feeding signal is achieved. From the envelope function, the angular velocity can be accurately determined. With the proposed sensors, instantaneous and practically unlimited rotation speeds can be measured.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High data density and capacity in chipless radiofrequency identification (chipless-RFID) tags based on double-chains of S-shaped split ring resonators (S-SRRs)

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
The data density per surface (DPS) is a figure of merit in chipless radiofrequency identification (chipless-RFID) tags. In this paper, it is demonstrated that chipless-RFID tags with high DPS can be implemented by using double-chains of S-shaped split ring resonators (S-SRRs). Tag reading is achieved by near-field coupling between the tag and the reader, a CPW transmission line fed by a harmonic signal tuned to the resonance frequency of the S-SRRs. By transversally displacing the tag over the CPW, the transmission coefficient of the line is modulated by tag motion. This effectively modulates the amplitude of the injected (carrier) signal at the output port of the line, and the identification (ID) code, determined by the presence or absence of S-SRRs at predefined and equidistant positions in the chains, is contained in the envelope function. The DPS is determined by S-SRR dimensions and by the distance between S-SRRs in the chains. However, by using two chains of S-SRRs, the number of bits per unit length that can be accommodated is very high. This chipless-RFID system is of special interest in applications where the reading distance can be sacrificed in favor of data capacity (e.g., security and authentication). Encoding of corporate documents, ballots, exams, etc., by directly printing the proposed tags on the item product to prevent counterfeiting is envisaged.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Microwave microfluidic sensor based on a microstrip splitter/combiner configuration and split ring resonators (SRRs) for dielectric characterization of liquids

  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Grenier, Katia|||0000-0002-5056-5582
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Dubuc, David
  • Martín, Ferran|||0000-0002-1494-9167
A microwave microfluidic sensor for dielectric characterization of liquids in real time is presented in this paper. The sensor is implemented in microstrip technology and consists of a symmetric splitter/combiner configuration loaded with a pair of identical split ring resonators (SRRs) and microfluidic channels placed on top of them (gap region). The sensor works in differential mode and sensing is based on frequency splitting. Thus, if the structure is unloaded or if it is symmetrically loaded with regard to the axial plane, only one transmission zero (notch) in the frequency response appears. However, if the axial symmetry is disrupted (e.g., by the presence of different liquids in the channels), two transmission zeros arise, and the difference in magnitude (notch depth) and frequency between such transmission zeros is indicative of the difference in the dielectric properties (complex dielectric constant). A circuit schematic, including transmission line sections to describe the distributed components, lumped elements to account for the SRRs and their coupling to the lines and lumped elements to model the liquid properties, is presented and validated. After proper calibration, the functionality of the proposed sensor is demonstrated by measuring the complex permittivity in solutions of deionized water and ethanol as a function of the ethanol content.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A review of sensing strategies for microwave sensors based on metamaterial-inspired resonators, dielectric characterization, displacement, and angular velocity measurements for health diagnosis, telecommunication, and space applications

  • Su, Lijuan|||0000-0002-4753-9340
  • Vélez, Paris|||0000-0001-6502-5987
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
Four sensing approaches for the implementation of microwave sensors based on transmission lines loaded with metamaterial-inspired resonators are considered in this review paper, and examples of applications are pointed out. In all the cases, sensing is based on the effects that the magnitude under measurement causes in the transmission properties of the resonator-loaded line. Such four strategies are (i) resonance frequency variation, (ii) coupling modulation through symmetry disruption (causing variation of the notch depth), (iii) frequency splitting (also exploiting symmetry properties), and (iv) amplitude modulation of a harmonic signal. Such sensors are useful in various scenarios, of interest in fields as diverse as characterization of dielectric materials for communication circuits, medical diagnosis and treatment with microwave technologies, and sensors for space applications, among others.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analytical method to estimate the complex permittivity of oil samples

  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Vélez, Paris|||0000-0001-6502-5987
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, an analytical method to estimate the complex dielectric constant of liquids is presented. The method is based on the measurement of the transmission coefficient in an embedded microstrip line loaded with a complementary split ring resonator (CSRR), which is etched in the ground plane. From this response, the dielectric constant and loss tangent of the liquid under test (LUT) can be extracted, provided that the CSRR is surrounded by such LUT, and the liquid level extends beyond the region where the electromagnetic fields generated by the CSRR are present. For that purpose, a liquid container acting as a pool is added to the structure. The main advantage of this method, which is validated from the measurement of the complex dielectric constant of olive and castor oil, is that reference samples for calibration are not required.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Broadband UHF-RFID passive tag based on split-ring resonator (SRR) and T-match network

  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
A novel broadband design of a planar passive UHF-RFID tag based on a split-ring resonator (SRR) antenna and the T-match network is presented in this work. The radiation properties of the SRR working at its second resonance are exploited to design a radio frequency identification (RFID) tag for the first time. The potential usefulness of the T-match based design methodology to achieve perfect matching between the SRR antenna and any typical RFID chip is demonstrated. A 0.23 λ₀ × 0.23 λ₀ tag has been fabricated. The measured read range is higher than 13 m within the whole UHF-RFID band with a peak value of 16 m at 915 MHz.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Near-field chipless radio-frequency identification (RFID) sensing and identification system with switching reading

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Moras Albero, Miquel|||0000-0003-3397-2730
  • Núñez, Alba|||0000-0003-3529-7986
  • Ramon, Eloi|||0000-0001-9974-8112
  • Martín, Ferran|||0000-0002-1494-9167
A chipless radio-frequency identification (chipless-RFID) and sensing system, where tags are read by proximity (near-field) through a switch, is presented. The tags consist of a set of identical resonant elements (split-ring resonators or SRRs), printed or etched at predefined and equidistant positions, forming a linear chain, each SRR providing a bit of information. The logic state ('1' or '0') associated with each resonator depends on whether it is present or not in the predefined position. The reader is an array of power splitters used to feed a set of SRR-loaded transmission lines (in equal number to the number of resonant elements, or bits, of the tag). The feeding (interrogation) signal is a harmonic (single-tone) signal tuned to a frequency in the vicinity of the fundamental resonance of the SRRs. The set of SRR-loaded lines must be designed so that the corresponding SRRs are in perfect alignment with the SRRs of the tag, provided the tag is positioned on top of the reader. Thus, in a reading operation, as long as the tag is very close to the reader, the SRRs of the tag modify (decrease) the transmission coefficient of the corresponding reader line (through electromagnetic coupling between both SRRs), and the amplitude of the output signal is severely reduced. Therefore, the identification (ID) code of the tag is contained in the amplitudes of the output signals of the SRR-loaded lines, which can be inferred sequentially by means of a switching system. Unlike previous chipless-RFID systems based on near-field and sequential bit reading, the tags in the proposed system can be merely positioned on top of the reader, conveniently aligned, without the need to mechanically place them across the reader. Since tag reading is only possible if the tag is very close to the reader, this system can be also used as a proximity sensor with applications such as target identification. The proposed chipless-RFID and sensing approach is validated by reading a designed 4-bit tag. For identification purposes, this system is of special interest in applications where a low number of bits suffice, and tag reading by proximity is acceptable (or even convenient). Applications mostly related to secure paper, particularly involving a limited number of items (e.g., exams, ballots, etc.), in order to provide authenticity and avoid counterfeiting, are envisaged. As a proximity sensor, the system may be of use in detecting and distinguishing different targets in applications such as smart packaging.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Upper bounds on the bandwidth of electrically small single-resonant UHF-RFID tags

  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
In this communication, the upper limits on the bandwidth of single-resonant UHF-radio frequency identification (RFID) tags as a function of the tag size are investigated, with and without forcing perfect matching between the antenna and the application-specific integrated circuit. By means of a circuit network analysis, it is found that bandwidth upper bounds of small tags are significantly higher in comparison with considering conjugate matching. Particularly, it is shown that the half-power bandwidth is √2 times (approximately 41%) higher, requiring a proper relaxation of the matching level at resonance. It is also shown that bandwidth of small real tags with perfect matching, which is typically far from its upper bound, can also be enhanced approximately the same factor at the expense of a small reduction (13.4%) in the peak read range. A practical example is provided, where two small split-ring resonator-based tags of the same size (k 0 a = 0.31) are designed. It demonstrates that such improvement on the tag bandwidth can be approximately obtained by simply changing the chip position, without the need of an external matching network. The improved tag was fabricated and measured, as a proof of concept. The results obtained from the proposed analysis allow RFID designers to determine how well a tag performs, compared to theoretical bandwidth limits.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly-sensitive microwave sensors based on open complementary split ring resonators (OCSRRs) for dielectric characterization and solute concentration measurement in liquids

  • Vélez, Paris|||0000-0001-6502-5987
  • Grenier, Katia|||0000-0002-5056-5582
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Dubuc, David
  • Martín, Ferran|||0000-0002-1494-9167
Differential permittivity sensors based on a pair of uncoupled microstrip lines, each one loaded with an open complementary split ring resonator (OCSRR), are proposed in this paper. The sensing principle is based on the measurement of the cross-mode insertion loss, very sensitive to asymmetric loading. Thus, by loading one of the OCSRRs with the reference sample, and the other one with the sample under test (SUT), the difference in the complex permittivity between both samples generates an asymmetry that gives rise to mode conversion. From the measurement of the cross-mode transmission coefficient, the dielectric properties of the SUT can be determined, provided those of the reference sample are well known. It is shown that by adding fluidic channels on top of the OCSRRs, the proposed sensor is useful for the measurement of the complex dielectric constant of liquids, and experimental results in mixtures of ethanol and deionized (DI) water and methanol in DI water, as a function of the ethanol/methanol content, are provided. Due to the high sensitivity of the proposed differential sensor to detect small perturbations (asymmetries), the structure is also of interest for the accurate measurement of solute concentrations in liquid solutions. In this paper, the structure is applied to monitor sodium content in aqueous solutions, and it is found that sodium concentrations as small as 0.25 g/L can be resolved.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Very low-cost 80-Bit chipless-RFID tags inkjet printed on ordinary paper

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Moras Albero, Miquel|||0000-0003-3397-2730
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Núñez, Alba|||0000-0003-3529-7986
  • Ramon, Eloi|||0000-0001-9974-8112
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a time-domain, chipless-RFID system with 80-bit tags inkjet-printed on ordinary DIN A4 paper. The tags, consisting of a linear chain of resonant elements (with as many resonators as the number of identification bits plus header bits), are read sequentially and by proximity (through near-field coupling). To this end, a transmission line, fed by a harmonic (interrogation) signal tuned to the resonance frequency of the tag resonators (or close to it), is used as a reader. Thus, during reader operation, the tag chain is mechanically shifted over the transmission line so that the coupling between the line and the functional resonant elements of the tag chain is favored. Logic states that '1' and '0' are determined by the functionality and non-functionality (resonator detuning), respectively, of the resonant elements of the chain. Through near-field coupling, the transmission coefficient of the line is modulated and, as a result, the output signal is modulated in amplitude (AM), which is the identification code contained in the envelope function. As long as the tags are inkjet-printed on ordinary DIN A4 paper, the cost is minimal. Moreover, such tags can be easily programmed and erased, so that identical tags can be fabricated on a large scale (and programmed at a later stage), further reducing the cost of manufacture. The reported prototype tags, with 80 bits of information plus four header bits, demonstrate the potential of this approach, which is of particular interest to secure paper applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhancing the number of modes in metasurfaced reverberation chambers for field uniformity improvement

  • Sun, Hengyi
  • Gu, Changqing
  • Li, Zhuo
  • Xu, Qian
  • Song, Jiajia
  • Xu, Baijie
  • Dong, Xiaohang
  • Wang, Kuan
  • Martín, Ferran|||0000-0002-1494-9167
The use of metasurfaces to increase the number of modes, lower the operating frequency, and improve the field uniformity in reverberation chambers (RCs) is investigated in this paper. The method used to improve the field uniformity and decrease the resonance frequencies is based on increasing the number of modes by using the concept of subwavelength cavities. The resonance frequencies of a RC with metasurface wall are derived and expressed analytically in terms of macroscopic characteristics. Simulation of the reflection phase of the unit cell is then given as a guideline to choose the required microscopic parameters of the designed metasurface. The mode density in such subwavelength RCs is then obtained using a numerical eigenmode solver. Compared to traditional RCs, a much higher modal density is obtained at low frequencies. The standard deviation of the field uniformity in the test volume of the RC corresponding to different types of metasurface walls is finally compared. It is shown that by increasing the number of modes in the RC at the lower band, the operating frequency decreases and the field uniformity of the RC is improved.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Parametric testing of metasurface stirrers for metasurfaced reverberation chambers

  • Sun, Hengyi
  • Gu, Changqing
  • Li, Zhuo
  • Xu, Qian
  • Wei, Mengmeng
  • Song, Jiajia
  • Xu, Baijie
  • Dong, Xiaohang
  • Wang, Kuan
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, the correlation coefficients and the total scattering cross sections (TSCSs) for different types of metasurfaced stirrers and the traditional metallic stirrer, and the effects on field uniformity when such stirrers are used in reverberation chambers, are analyzed. Three metasurfaced stirrers are considered: A stirrer with two unit cells arranged alternatively (#1), a stirrer with two unit cells arranged in a chessboard-like manner (#2), and a stirrer with two unit cells in random arrangement (#3). From the correlation coefficient and TSCS results obtained in simulations, it follows that metasurfaced stirrer #1 is the best option. Field uniformity analysis of the resulting metasurface reverberation chambers (MRC) equipped with the different stirrers also supports this conclusion.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Differential microfluidic sensors based on dumbbell-shaped defect ground structures in microstrip technology, analysis, optimization, and applications

  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Gil, Marta
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
A microstrip defect ground structure (DGS) based on a pair of dumbbell-shaped slots is used for sensing. The device is a differential sensor consisting of a pair of mirrored lines loaded with a dumbbell-shaped DGS, and the output variable is the cross-mode transmission coefficient. Such a variable is very sensitive to asymmetries in the line pair, e.g., caused by an asymmetric dielectric load in the dumbbell-shaped DGSs. Therefore, the sensor is of special interest for the dielectric characterization of solids and liquids, or for the measurement of variables related to complex permittivity changes. It is shown in this work that by adding fluidic channels on top of the dumbbell-shaped DGSs, the device is useful for liquid characterization, particularly for the measurement of solute concentration in very diluted solutions. A sensitivity analysis useful for sensor design is carried out in this paper.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Chipless-RFID, a review and recent developments

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
In this paper, a review of the state-of-the-art chipless radiofrequency identification (RFID) technology is carried out. This recent technology may provide low cost tags as long as these tags are not equipped with application specific integrated circuits (ASICs). Nevertheless, chipless-RFID presents a series of technological challenges that have been addressed by different research groups in the last decade. One of these challenges is to increase the data storage capacity of tags, in order to be competitive with optical barcodes, or even with chip-based RFID tags. Thus, the main aim of this paper is to properly clarify the advantages and disadvantages of chipless-RFID technology. Moreover, since the coding information is an important aspect in such technology, the di_erent coding techniques, as well as the main figures of merit used to compare di_erent chipless-RFID tags, will be analyzed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Split ring resonator-based microwave fluidic sensors for electrolyte concentration measurements

  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Grenier, Katia|||0000-0002-5056-5582
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Dubuc, David
  • Martín, Ferran|||0000-0002-1494-9167
A differential microwave sensor, based on a pair of uncoupled microstrip lines each one loaded with a split ring resonator (SRR), is applied to the measurement of electrolyte concentration in deionized (DI) water. For that purpose, fluidic channels are added on top of the SRR gaps, the most sensitive parts of the structure. The operating principle is based on the measurement of the cross-mode insertion loss, highly sensitive to small asymmetries caused by differences between the reference liquid and the liquid under test (LUT). In this paper, the reference liquid is pure DI water (the solvent), whereas the solution, DI water with electrolyte content, is injected to the LUT channel. The proposed sensor is able to detect electrolyte concentrations as small as 0.25 g/L, with maximum sensitivity of 0.033 (g/L) ⁻¹ . The sensor is validated by measuring the concentration of three types of electrolytes, i.e., NaCl, KCl, and CaCl2. Finally, the sensor is applied to monitor variations of total electrolyte concentration in urine samples.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compact coplanar waveguide power splitter with filtering capability based on slow-wave structures

  • Vélez, Paris|||0000-0001-6502-5987
  • Aznar Ballesta, Francisco|||0000-0002-1845-7071
  • Coromina, Jan|||0000-0002-3541-4663
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A compact coplanar waveguide (CPW) power splitter with filtering capability is presented in this paper. The splitter consists of a pair of 70.71 Ω impedance inverters implemented by means of inductively and capacitively loaded slow-wave structures. Such slow-wave structures efficiently shorten the length of the inverters, thereby providing substantial size reduction to the power splitter. The filtering functionality is due to the Bragg effect, related to periodicity. The proposed splitter, designed to be functional at 1 GHz, exhibits good performance at that frequency, with measured return loss of 20.6 dB and insertion loss of 3.15 dB and 3.23 dB at the output ports. Moreover, the suppression level at the first, second and third harmonic frequency is better than 12.4 dB, 34.6 dB and 24.7 dB, respectively. As compared to the length of the ordinary inverters, the length of the constitutive slow-wave impedance is reduced by a factor of two.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Near-field chipless-RFID system with erasable/programmable 40-bit tags inkjet printed on paper substrates

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Núñez, Alba|||0000-0003-3529-7986
  • Ramon, Eloi|||0000-0001-9974-8112
  • Martín, Ferran|||0000-0002-1494-9167
In this letter, a chipless radio frequency identification (chipless-RFID) system with erasable/programmable 40-bit tags inkjet printed on paper substrates, where tag reading proceeds sequentially through near-field coupling, is presented for the first time. The tags consist of a linear chain of identical split ring resonators (SRRs) printed at predefined and equidistant positions on a paper substrate, and each resonant element provides a bit of information. Tag programming is achieved by cutting certain resonant elements, providing the logic state "0" to the corresponding bit. Conversely, tags can be erased (all bits set to "1") by short circuiting those previously cut resonant elements through inkjet. An important feature of the proposed system is the fact that tag reading is possible either with the SRR chain faced up or faced down (with regard to the reader). To this end, two pairs of header bits (resonators), with different sequences, have been added at the beginning and at the end of the tag identification chain. Moreover, tag data storage capacity (number of bits) is only limited by the space occupied by the linear chain. The implementation of tags on paper substrates demonstrates the potential of the proposed chipless-RFID system in secure paper applications, where the necessary proximity between the reader and the tag, inherent to near-field reading, is not an issue.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Near-field chipless-RFID tags with sequential bit reading implemented in plastic substrates

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Núñez, Alba|||0000-0003-3529-7986
  • Ramon, Eloi|||0000-0001-9974-8112
  • Martín, Ferran|||0000-0002-1494-9167
Chipless radiofrequency identification (chipless-RFID) systems based on near-field coupling between the tag and the reader and sequential bit reading, with tags implemented on plastic substrates, are presented in this paper. In the proposed system, the tag is a set of identical resonant elements (S-shaped split ring resonators - S-SRRs), inkjet-printed on a plastic substrate (PEN), forming a resonator chain. The presence or absence of resonant elements at predefined and equidistant positions in the chain determines the logic state '1' and '0', respectively, associated with each resonant element. The reader is a coplanar waveguide (CPW) transmission line fed by a harmonic signal tuned to the resonance frequency of the resonant elements of the chain. Tag reading is achieved by displacing the chain of resonant elements above the CPW transmission line, in close proximity to it, so that near-field coupling between the CPW transmission line and the resonant elements of the tag results. By this means, the injected carrier signal is amplitude modulated, provided the transmission coefficient of the line varies with the presence or absence of resonant elements in the chain, and the identification (ID) code is contained in the envelope function. The functionality of the proposed system, with 10-bit tags occupying an area of 1.35 cm2 (corresponding to an information density of 7.4 bit/cm²), is demonstrated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Miniaturised and harmonic-suppressed rat-race couplers based on slow-wave transmission lines

  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Coromina, Jan|||0000-0002-3541-4663
  • Vélez, Paris|||0000-0001-6502-5987
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
In this study, a compact rat-race hybrid coupler with harmonic suppression based on slow-wave transmission lines (SW-TLs) is presented. Such artificial lines are implemented by periodic loading a host microstrip line with series meandered inductors and shunt patch capacitors. The presence of both loading elements has a twofold effect, i.e. phase velocity reduction (due to the enhancement of the effective inductance and capacitance of the periodic line), and the generation of a controllable stopband in the frequency response (due to the Bragg effect, inherent to periodicity). It is shown that by designing the unit cell of the periodic line with an electrical length of 45°, at least the first five harmonic bands of the rat-race coupler are efficiently suppressed, keeping the band of interest unaltered. Moreover, 79% size reduction, as compared to the ordinary coupler, is achieved in the reported SW-TL-based prototype.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reactively-loaded non-periodic slow-wave artificial transmission lines for stop band bandwidth enhancement, application to power splitters

  • Coromina, Jan|||0000-0002-3541-4663
  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Aznar Ballesta, Francisco|||0000-0002-1845-7071
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents slow-wave transmission lines based on non-periodic reactive loading. Specifically, the loading elements are stepped impedance shunt stubs (SISS). By sacrificing periodicity using SISS tuned to different frequencies, multiple transmission zeros above the pass band arise, and the rejection level and bandwidth of the stop band is improved as compared with those of periodic structures. Through a proper design, it is possible to achieve compact lines, simultaneously providing the required electrical length and characteristic impedance at the design frequency (dictated by specifications), and efficiently filtering the response at higher frequencies. These lines are applied to the design of a compact power splitter with filtering capability in this work. The length of the splitter, based on a 35.35 Ω impedance inverter, is reduced by a factor of roughly two. Moreover, harmonic suppression better than 20 dB up to the fourth harmonic is achieved.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Differential-mode to common-mode conversion detector based on rat-race hybrid couplers, analysis and application to differential sensors and comparators

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An analytical method to implement high-sensitivity transmission line differential sensors for dielectric constant measurements

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
A simple analytical method useful to optimize the sensitivity in differential sensors based on a pair of meandered microstrip lines is presented in this paper. Sensing is based on the phase difference of the transmission coefficients of both lines, when such lines are asymmetrically loaded. The analysis provides the combination of operating frequency and line length (the main design parameters) that are necessary to obtain the maximum possible differential phase (±180°) for a given level of the differential dielectric constant (input dynamic range). The proposed sensor is useful to detect tiny defects of a sample under test (SUT) as compared to a reference (REF) sample. It can also be applied to the measurement of the complex dielectric constant of the SUT, where the real part is inferred from the differential phase, whereas the imaginary part, or the loss tangent, is derived from the modulus of the transmission coefficient of the line loaded with the SUT. It is experimentally demonstrated that the proposed device is able to detect the presence of few and small (purposely generated) defects in a commercial microwave substrate, as well as subtle variations in their density, pointing out the high achieved sensor sensitivity. Sensor validation is also carried out by determining the dielectric constant and loss tangent of commercial microwave substrates.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Signal balancing in unbalanced transmission lines

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Martín, Ferran|||0000-0002-1494-9167
Balanced lines operating as transmission line interconnects are subjected to differential-mode to common-mode conversion (and vice versa) in situations where symmetry imbalances (e.g., caused by line bends) are unavoidable. In this paper, a technique to compensate for such symmetry imbalances, providing pure differential-mode signals at the differential output port of the line, is presented. Such technique uses a rat-race balun (to generate the differential-mode signal) with the isolated port conveniently loaded, and it is based on the modification of the characteristic impedance of one of the unbalanced lines. A detailed analysis that justifies this compensation technique (valid for any arbitrary four-port network) and provides the design equations is presented. The approach is validated through simulation and experiment, by demonstrating that common-mode signals are not transmitted to the differential output port of a bended (i.e., unbalanced) line pair.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Time-domain-signature chipless RFID tags, near-field chipless-RFID systems with high data capacity

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Double-stub loaded microstrip line reader for very high data density microwave encoders

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
Compact and high-data density microwave encoders useful for motion control and near-field chipless radio frequency identification (chipless-RFID) applications are proposed in this paper. The encoders are chains of metallic strips etched on a dielectric substrate. The reader consists of a microstrip line loaded with a pair of identical open-ended folded stubs located at different positions and oriented face-to-face by their extremes. By displacing the encoder over the extremes of the stubs, interstub coupling arises when a strip is located on top of the stubs, thereby generating two transmission zeros (rather than one) in the frequency response of the line. Thus, the presence of a strip on top of the face-to-face stubs produces a variation in the transmission coefficient of the line, which in turn can be detected by feeding the line with a harmonic signal, conveniently tuned. Encoder motion generates an amplitude modulated (AM) signal at the output port of the line with peaks, or dips, separated by a time distance dictated by the relative velocity between the reader and the encoder. Moreover, by making certain strips of the chain inoperative (e.g., by cutting them), it is possible to encode information that can be read as the absence (logic state "1") or presence (logic state "0") of peaks, or dips, at predefined positions in the output AM signal of the reader line. Since short strips suffice to generate interstub coupling, unprecedented data density per surface (DPS = 26.04 bit/cm 2 ) is obtained, as revealed by the implementation of 6.4 mm × 60 mm 100-bit encoders.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High-density microwave encoders for motion control and near-field chipless-RFID

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Muela, Francisco Javier
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
A novel microwave system for measuring linear displacements and velocities with sub-millimeter resolution and for the implementation of near-field chipless radiofrequency identification (chipless-RFID) systems with very high data capacity is presented. The system is based on a reader, consisting of a half-wavelength straight resonator coupled (through capacitor gaps) to a pair of access lines, and a microwave encoder, in relative motion to the reader and consisting of a linear chain of strips orthogonally oriented to the chain axis. By displacing the encoder over the half-wavelength resonator of the reader, with the encoder strips parallel oriented to the reader axis, the relative velocity and position between the encoder and the reader can be inferred. For that purpose, the reader is fed by a harmonic signal tuned to the resonance frequency that results when an encoder strip is perfectly aligned with the reader. The encoder motion amplitude modulates the feeding signal at the output port, and both the position and the velocity are measured from the peaks, or dips, of the resulting envelope function. Moreover, by making certain strips inoperative, the system can be used for coding purposes. Due to the small period of the encoder (0.6 mm), a high per-unit-length data density in these near-field chipless-RFID tags (i.e., 16.66 bits/cm) is achieved. To illustrate the functionality and potential of the approach, 100-bit chipless-RFID tags with various ID codes are implemented and read.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

3D-printed all-dielectric electromagnetic encoders with synchronous reading for measuring displacements and velocities

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, 3D-printed electromagnetic (or microwave) encoders with synchronous reading based on permittivity contrast, and devoted to the measurement of displacements and velocities, are reported for the first time. The considered encoders are based on two chains of linearly shaped apertures made on a 3D-printed high-permittivity dielectric material. One such aperture chain contains the identification (ID) code, whereas the other chain provides the clock signal. Synchronous reading is necessary in order to determine the absolute position if the velocity between the encoder and the sensitive part of the reader is not constant. Such absolute position can be determined as long as the whole encoder is encoded with the so-called de Bruijn sequence. For encoder reading, a splitter/combiner structure with each branch loaded with a series gap and a slot resonator (each one tuned to a different frequency) is considered. Such a structure is able to detect the presence of the apertures when the encoder is displaced, at short distance, over the slots. Thus, by injecting two harmonic signals, conveniently tuned, at the input port of the splitter/combiner structure, two amplitude modulated (AM) signals are generated by tag motion at the output port of the sensitive part of the reader. One of the AM envelope functions provides the absolute position, whereas the other one provides the clock signal and the velocity of the encoder. These synchronous 3D-printed all-dielectric encoders based on permittivity contrast are a good alternative to microwave encoders based on metallic inclusions in those applications where low cost as well as major robustness against mechanical wearing and aging effects are the main concerns.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Branch line couplers with small size and harmonic suppression based on non-periodic step impedance shunt stub (SISS) loaded lines

  • Coromina, Jan|||0000-0002-3541-4663
  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents branch line couplers with compact size and harmonic suppression based on non-periodic reactively loaded artificial lines. The reactive loading elements of the lines are step impedance shunt stubs (SISSs). Such elements provide transmission zeros, which are useful to efficiently suppressing the harmonic content of the device. Moreover, by virtue of reactive loading, the reported artificial lines exhibit a slow wave effect of interest for device miniaturization. The combination of size, harmonic suppression efficiency, and design simplicity (with a clear design methodology) is of interest within the framework of artificial transmission lines and their application to the optimization of microwave passive components.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Planar microwave resonant sensors, a review and recent developments

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
Microwave sensors based on electrically small planar resonant elements are reviewed in this paper. By virtue of the high sensitivity of such resonators to the properties of their surrounding medium, particularly the dielectric constant and the loss factor, these sensors are of special interest (although not exclusive) for dielectric characterization of solids and liquids, and for the measurement of material composition. Several sensing strategies are presented, with special emphasis on differential-mode sensors. The main advantages and limitations of such techniques are discussed, and several prototype examples are reported, mainly including sensors for measuring the dielectric properties of solids, and sensors based on microfluidics (useful for liquid characterization and liquid composition). The proposed sensors have high potential for application in real scenarios (including industrial processes and characterization of biosamples).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly Sensitive Reflective-Mode Defect Detectors and Dielectric Constant Sensors Based on Open-Ended Stepped-Impedance Transmission Lines

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, reflective-mode phase-variation sensors based on open-ended stepped-impedance transmission lines with optimized sensitivity for their use as defect detectors and dielectric constant sensors are reported. The sensitive part of the sensors consists of either a 90° high-impedance or a 180° low-impedance open-ended sensing line. To optimize the sensitivity, such a sensing line is cascaded to a 90° transmission line section with either low or high characteristic impedance, resulting in a stepped-impedance transmission line configuration. For validation purposes, two different sensors are designed and fabricated. One of the sensors is implemented by means of a 90° high impedance (85 Ω) open-ended sensing line cascaded to a 90° low impedance (15 Ω) transmission line section. The other sensor consists of a 180° 15-Ω open-ended sensing line cascaded to a 90° 85-Ω line. Sensitivity optimization for the measurement of dielectric constants in the vicinity of that corresponding to the Rogers RO4003C substrate (i.e., with dielectric constant 3.55) is carried out. The functionality as a defect detector is demonstrated by measuring the phase-variation in samples consisting of the uncoated Rogers RO4003C substrate (the reference sample) with arrays of holes of different densities.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Planar Phase-Variation Microwave Sensors for Material Characterization, a review and comparison of various approaches

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Coromina, Jan|||0000-0002-3541-4663
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Martín, Ferran|||0000-0002-1494-9167
Planar phase-variation microwave sensors have attracted increasing interest in recent years since they combine the advantages of planar technology (including low cost, low profile, and sensor integration with the associated circuitry for post-processing and communication purposes, among others) and the possibility of operation at a single frequency (thereby reducing the costs of the associated electronics). This paper reviews and compares three different strategies for sensitivity improvement in such phase-variation sensors (devoted to material characterization). The considered approaches include line elongation (through meandering), dispersion engineering (by considering slow-wave artificial transmission lines), and reflective-mode sensors based on step-impedance open-ended lines. It is shown that unprecedented sensitivities compatible with small sensing regions are achievable with the latter approach.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metasurfaced Reverberation Chamber

  • Sun, Hengyi
  • Li, Zhuo
  • Gu, Changqing
  • Xu, Qian
  • Chen, Xinlei
  • Sun, Yunhe
  • Lu, Shengchen
  • Martín, Ferran|||0000-0002-1494-9167
The concept of metasurfaced reverberation chamber (RC) is introduced in this paper. It is shown that by coating the chamber wall with a rotating 1-bit random coding metasurface, it is possible to enlarge the test zone of the RC while maintaining the field uniformity as good as that in a traditional RC with mechanical stirrers. A 1-bit random coding diffusion metasurface is designed to obtain all-direction backscattering under normal incidence. Three specific cases are studied for comparisons, including a (traditional) mechanical stirrer RC, a mechanical stirrer RC with a fixed diffusion metasurface, and a RC with a rotating diffusion metasurface. Simulation results show that the compact rotating diffusion metasurface can act as a stirrer with good stirring efficiency. By using such rotating diffusion metasurface, the test region of the RC can be greatly extended.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Reflective-Mode Phase-Variation Displacement Sensor

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, a displacement sensor based on an open-ended step-impedance transmission line is reported. The sensor operates in reflection, and the output variable is the phase of the reflection coefficient. The static part of the sensor is the step-impedance transmission line, where the open-ended line section is the sensitive part (sensing line). The movable part is a dielectric slab, e.g., an uncladded microwave substrate. When such slab, located on top of the sensing line, is in relative motion to the line, in the direction of the line axis, the portion of the sensing line covered by the slab varies, and this results in a change in the phase of the reflection coefficient of the line. The step impedance discontinuity contributes to optimize the sensor sensitivity, the key parameter. A detailed analysis providing the design guidelines is carried out and used to design a prototype displacement sensor. The characterization of the fabricated device points out the potential of the approach to implement highly sensitive displacement sensors. The sensor is a one-port device and operates at a single frequency.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly Sensitive Reflective-Mode Phase-Variation Permittivity Sensor Based on a Coplanar Waveguide Terminated With an Open Complementary Split Ring Resonator (OCSRR)

  • Su, Lijuan|||0000-0002-4753-9340
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a one-port reflective-mode phase-variation microwave sensor consisting of a coplanar waveguide (CPW) transmission line terminated with a grounded open complementary split ring resonator (OCSRR). The sensor is useful for measuring the dielectric constant of the so-called material under test (MUT), which should be placed in contact with the OCSRR, the sensitive element. The output variable is the phase of the reflection coefficient. Design guidelines for the implementation of highly sensitive sensors are derived in the paper, and validated through simulation and experiment. As compared to other reflective mode phase-variation sensors based on open-ended sensing lines, the designed and fabricated devices exhibit a very small sensitive region by virtue of the use of an electrically small resonant element, the OCSRR. The relevant figure of merit, defined as the ratio between the maximum sensitivity and the size of the sensing area (expressed in terms of the squared wavelength), is as high as FoM = 5643°/λ 2 in one of the reported prototypes. Moreover, the paper analyzes the effects of losses. From this study, it is concluded that MUT losses do not significantly affect the output variable, provided losses are small. It is also demonstrated that the sensor is useful to estimate the loss tangent of the considered MUT samples.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High data density near-field chipless-RFID tags with synchronous reading

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Escude Pujol, Roger|||0000-0002-0780-8104
  • Ramon, Eloi|||0000-0001-9974-8112
  • Martín, Ferran|||0000-0002-1494-9167
Near-field chipless-RFID tags with high data density and synchronous reading capability are presented and experimentally validated in this paper. The tags consist of a chain of rectangular patches etched or printed at predefined positions on a dielectric substrate, including rigid or flexible (i.e., plastic or even paper) substrates. Patch dimensions determine the binary state, where the larger and smaller patches are associated with the logic '1' and '0' states, respectively, or vice versa. For sequentially and synchronously reading the bits, a sensitive element able to determine the presence of the patches and their size by proximity (through near field using microwaves) is considered. Such element is a microstrip line loaded with a pair of rectangular complementary split ring resonators (CSRRs), one etched inside the other in the ground plane. When the tag chain is displaced at short distance over the CSRRs, the larger patches modify the resonance frequency of both sensing CSRRs, whereas the lower patches do only alter the resonance frequency of the smaller CSRR. Consequently, the ID code is contained in the patch dimensions, and the presence of a patch (regardless of its size) determines the reading times (clock signal), necessary for synchronous reading. Tag reading in this system proceeds by feeding the CSRR-loaded line (reader) with a pair of harmonic signals tuned to the resonance frequencies of the bare CSRRs. Both signals are amplitude modulated (AM) at the output port as consequence of tag motion, and the respective envelope functions contain both the clock signal and the tag ID code. The ID codes of several 16-bit tags, implemented on different substrates (microwave substrate, plastic and paper) and exhibiting a per unit length density of 1.67 bit/cm, have been inferred with the dedicated reader for validation purposes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Microfluidic reflective-mode differential sensor based on open split ring resonators (OSRRs)

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
This paper proposes a differential sensor based on a pair of open split ring resonators (OSRR) operating in reflection. The output signal is thus the differential reflection coefficient of both resonators, intimately related to their dielectric loading. Thus, for identical loads in both sensing resonators, the individual reflection coefficients are equal, thereby providing an ideally null output signal. By contrast, when unequal dielectric loads truncate the symmetry, the reflection coefficients are different, resulting in a differential output signal related to the level of asymmetry. In order to ease the measurement of the output signal, a rat-race hybrid coupler is used. The OSRR sensing loads are connected to the coupled ports of the hybrid coupler, whereas the input signal is injected to the Δ-port, and the output signal is collected at the isolated port (Σ-port). By this means, the output signal, i.e. the differential reflection coefficient between both sensing loads, is obtained from the transmission coefficient of a simple two-port structure. For experimental validation purposes, the sensor is applied to the measurement of isopropanol content in aqueous solutions, and for that purpose, the sensitive regions are equipped with microfluidic channels.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the Sensitivity of Reflective-Mode Phase-Variation Sensors Based on Open-Ended Stepped-Impedance Transmission Lines: Theoretical Analysis and Experimental Validation

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Martín, Ferran|||0000-0002-1494-9167
This article presents an exhaustive study of the sensitivity in reflective-mode phase-variation sensors based on an open-ended transmission line with a step-impedance discontinuity. Such discontinuity delimits the sensing region (which extends up to the open end of the so-called sensing line), from the transmission line section connected to the input port (design line), which is used to enhance the sensitivity. The theoretical analysis provides the design guidelines to achieve a sensor with high sensitivity compared with the one based on an ordinary (uniform) line with a similar length. In particular, it is shown that for sensitivity optimization, the electrical length of the design line must be set to 90° (or an odd multiple), whereas either a 90° (or an odd multiple) or a 180° (or an even or odd multiple) sensing line can be alternatively used in order to maximize the sensitivity. It is shown that the impedance contrast, defined as the ratio between the characteristic impedances of the design and sensing line, is a key parameter for sensitivity enhancement, and it must be as low or as high as possible for the 90° or 180° sensing lines, respectively. For validation purposes, two prototype devices (one with a 90° and the other one with a 180° sensing line) have been designed and fabricated following the design guidelines. Such devices have been tested by loading the sensing region with several materials with different dielectric constants. Compared with the ordinary line-based sensors, it is found that the maximum sensitivity is enhanced by a factor of 19.7 and 11.4 in the phase-variation sensor based on a 90° and 180° sensing line, respectively. Finally, the sensor concept is generalized to a multisection step-impedance transmission line as a means of further increasing the sensitivity, and a prototype device exhibiting 528.7° maximum sensitivity is implemented.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Differential Sensing Based on Quasi-Microstrip Mode to Slot-Mode Conversion

  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Martín, Ferran|||0000-0002-1494-9167
In this letter, a differential sensor and comparator based on a mode conversion detector implemented by means of a slotline resonator is proposed for the first time. The sensor divides the input signal between two identical sensing elements, a pair of microstrip lines loaded with complementary split-ring resonators (CSRRs). Such CSRRs are symmetrically etched in the ground plane at both sides of the slotline. Therefore, by truncating symmetry, e.g., by loading one of the CSRRs with the reference (REF) sample and the other one with the sample under test (SUT), the slot mode is generated in the slotline resonator. The signal level associated with this mode, which can be inferred by means of a slotline/microstrip transition, depends on the level of asymmetry generated by CSRR loading. Consequently, the proposed structure is useful for differential sensing, where a single input and output port suffices to excite the sensor and to measure the output variable, the magnitude of the transmission coefficient.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Single-frequency amplitude-modulation sensor for dielectric characterization of solids and microfluidics

  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Ebrahimi, Amir|||0000-0002-1787-2230
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Scott, James
  • Ghorbani, Kamran|||0000-0001-8767-0207
  • Martín, Ferran|||0000-0002-1494-9167
A microfluidic sensor based on a microstrip line loaded with a composite resonator is reported in this paper. The composite resonator combines a shunt connected step impedance resonator (SIR) and a complementary split ring resonator CSRR) etched in the ground plane. By etching the CSRR beneath the patch of the SIR, the composite CSRR-loaded SIR resonator exhibits two transmission zeros and a pole in between. The operating principle of the sensor is the variation of the transmission coefficient at the pole frequency of the bare resonator, when a material or liquid under test (LUT) is in contact with the CSRR (the sensitive element). By designing the CSRR-loaded SIR resonator with closely spaced pole and transmission zeros, highly sensitive sensors are obtained. Despite the fact that the proposed sensor can also operate as a frequency variation sensor, using it as a single-frequency sensor based on the variation of the transmission coefficient (caused by the LUT) at a specific frequency reduces sensor costs. The reason is that a harmonic signal injected to the input port of the microstrip-based sensor plus a simple amplitude modulation (AM) detector (connected to the output port) suffices for measuring purposes. The proposed microfluidic sensor is applied to the characterization of volume fraction of solutions of isopropanol in deionized (DI) water. The sensor is able to resolve volume fractions as small as 5%, and the maximum measured sensitivity is as good as 4 mV/%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Characterization of electrolyte content in urine samples through a differential microfluidic sensor based on dumbbell-shaped defected ground structures

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Gil Barba, Marta|||0000-0002-1106-5059
  • José Cunilleras, Eduard|||0000-0002-4536-7717
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, a differential microfluidic sensor and comparator based on a pair of microstrip lines loaded with dumbbell-shaped defected ground structure resonators is applied to the characterization of electrolyte concentration in samples of horse urine. Since variations in the total electrolyte content in urine may be indicative of certain pathologies, the interest is to use the device as a comparator, in order to determine changes in the electrolyte concentration as compared to a reference level. To validate the approach, we have made differential measurements of a set of urine samples with different electrolyte concentrations (which have been previously obtained by means of electrochemical methods). The obtained results correlate with the nominal electrolyte concentrations of the samples, thereby pointing out the potential of the approach as a low-cost pre-screening method (or complementary diagnosis system) to detect potential pathologies or diseases in horses and other animals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

3-D-Printed High Data-Density Electromagnetic Encoders Based on Permittivity Contrast for Motion Control and Chipless-RFID

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
The 3-D-printed electromagnetic encoders based on permittivity contrast are presented and discussed in this article. The encoders, implemented using exclusively dielectric materials, are based on linear chains of dielectric inclusions. Two types of encoders are considered: 1) those where the inclusions are simple apertures made on a 3-D-printed dielectric plate (or substrate) and 2) those with inclusions made of high dielectric constant material 3-D-printed on a dielectric substrate (also 3-D-printed). In both cases, encoding is achieved by varying the dielectric constant of the substrate at predefined positions by means of the inclusions. For encoder reading, a microstrip line loaded with a slot resonator (etched in the ground plane) and a series gap is proposed. Such structure is very sensitive to short range dielectric constant variations, being able to detect the presence or absence of closely spaced inclusions when the encoder is displaced on top of the sensitive part of the reader, the slot resonator. For that purpose, the reader line is fed by a harmonic signal conveniently tuned, so that an amplitude-modulated (AM) signal containing the identification (ID) code is generated at the output port of the line. The proposed reader/encoder system is useful for motion control applications (linear displacement and velocity sensors) and for near-field chipless-radio frequency ID (RFID). Lower cost and major robustness against mechanical wearing are potential advantages of these encoders over other electromagnetic encoders based on a similar principle but based on metallic inclusions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synchronism and direction detection in high-resolution/high-density electromagnetic encoders

  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
Recently, electromagnetic encoders with synchronous reading and direction detection capability have been reported. Such structures are useful for the implementation of (i) displacement/velocity sensors and (ii) chipless-RFID systems based on near-field coupling and sequential bit reading. In the latter, synchronous reading and motion direction detection are a need in order to avoid false readings of the identification (ID) code, if the relative velocity between the reader and the encoder is not constant, and to read the correct ID code (rather than the inverse one), respectively. On the other hand, synchronous reading and motion direction detection, are essential to determine the encoder direction in displacement/velocity sensors, as well as to provide the absolute position of the encoder, provided that the whole encoder is encoded with the Bruijn sequence. In this paper, synchronous reading and direction detection in high-resolution/high-density electromagnetic encoders based on chains of linearly-shaped metallic inclusions are reported. To this end, it is necessary to add two chains of metallic inclusions to the one containing the ID code. In the reader side, three harmonic signals are necessary in order to generate the clock signals and to obtain the ID code. The reader consists of a microstrip line loaded with three pairs of open-ended folded stubs positioned face-to-face by their extremes. By displacing the encoder chains over the extreme of the stubs, at short distance, stub coupling is enhanced when a metallic inclusion lies on top of the stubs, and the frequency response of the reader is shifted towards lower frequencies. Thus, by injecting three (properly tuned) harmonic signals at the input port of the microstrip transmission line, three amplitude modulated (AM) signals are generated by tag motion at the output port of such transmission line, and the envelope functions contain the velocity, the ID code and the absolute position. The reported reader/encoder system exhibits superior space resolution and information density as compared to other similar systems based on synchronous reading.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhancing the Per-Unit-Length Data Density in Near-Field Chipless-RFID Systems With Sequential Bit Reading

  • Havlíček, Jaroslav|||0000-0001-5644-715X
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
In this letter, a novel near-field chipless-Radio Frequency Identification (RFID) system with sequential bit reading is reported. The main novelty concerns the tags, implemented by means of straight half-wavelength resonators separated by a small distance and forming a linear chain in the direction orthogonal to their axis. By this means, the number of resonant elements (or bits) per unit length of the tag is significantly increased, as compared to the previous implementations, with the result of very competitive tags in terms of data density. The active part of the reader is a microstrip line loaded with a shunt stub. Through a proper design, it is possible to achieve a significant excursion of the transmission coefficient when the stub is either loaded or unloaded with a functional resonant element of the tag. Consequently, by tag motion over the reader (stub), it is possible to infer the Identification (ID) code by simply injecting a harmonic signal to the input port of the stub-loaded line (the ID code is contained in the amplitude modulated, signal at the output port). This system has been validated by considering 100 b tags exhibiting a surface data density of 4.9 b/cm 2 . However, the relevant parameter is the data density per unit length, as high as 16.7 b/cm, i.e., much larger than previous values reported in the literature in similar chipless-RFID systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly sensitive phase variation sensors based on step-impedance coplanar waveguide (CPW) transmission lines

  • Su, Lijuan|||0000-0002-4753-9340
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
Reflective-mode step-impedance transmission line based sensors for dielectric characterization of solids or liquids have been recently proposed. In this article, in order to further increase the sensitivity, the sensor is implemented in coplanar waveguide (CPW technology), and this constitutes the main novelty of this work. The sensor thus consists of a high-impedance 90° (or low-impedance 180°) open-ended sensing line cascaded to a low-impedance 90° (or high-impedance 90°) line. The output variable is the phase of the reflection coefficient, which depends on the dielectric constant of the material under test (MUT), the input variable. Placing a MUT on top of the sensing line causes a variation in the effective dielectric constant of the line, thereby modifying the phase of such line. This in turn produces a multiplicative effect on the phase of the reflection coefficient, by virtue of the step-impedance discontinuity. The main advantage of the CPW-based sensor, over other similar sensors based on microstrip technology, is the stronger dependence of the phase velocity of the sensing line with the dielectric constant of the MUT, resulting in sensitivities as high as -45.48° in one of the designed sensors. The sensor is useful for dielectric characterization of solids and liquids, and for the measurement of variables related to changes in the dielectric constant of the MUT (defect detection, material composition, etc.).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phase-variation microwave sensor for permittivity measurements based on a high-impedance half-wavelength transmission line

  • Su, Lijuan|||0000-0002-4753-9340
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
A phase-variation microwave sensor operating in transmission and implemented by means of a high-impedance half-wavelength sensing line is reported in this paper. The sensor is useful for dielectric constant measurements and dielectric characterization of materials. By forcing the electrical length of the sensing line to be a half-wavelength when it is loaded with the so-called reference (REF) material, perfect matching is obtained regardless of the characteristic impedance of the line. This fact can be used to enhance the sensitivity for small perturbations, by merely increasing the characteristic impedance of the sensing line. An exhaustive analysis that supports such conclusion is reported in the paper. Then, two prototype sensors are designed and fabricated for validation purposes. As compared to the ordinary phase-variation permittivity sensor implemented by means of a matched ( 50-Ω) line with identical length, the sensitivity for small perturbations in the proposed sensor is 2.1 times larger. Further advantages of these sensors are low-cost, small size, implementation in planar technology, and very simple design and fabrication, derived from the fact that the sensing region is a half-wavelength transmission line.