Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Libro o Monografía (Book)

Planar Microwave Sensors

  • Martín, Ferran|||0000-0002-1494-9167
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
Planar Microwave Sensors is an authoritative resource on the subject, discussing the main relevant sensing strategies, working principles, and applications on the basis of the authors’ own experience and background, while also highlighting the most relevant contributions to the topic reported by international research groups. The authors provide an overview of planar microwave sensors grouped by chapters according to their working principle. In each chapter, the working principle is explained in detail and the specific sensor design strategies are discussed, including validation examples at both simulation and experimental level. The most suited applications in each case are also reported. The necessary theory and analysis for sensor design are further provided, with special emphasis on performance improvement (i.e., sensitivity and resolution optimization, dynamic range, etc.). Lastly, the work covers a number of applications, from material characterization to biosensing, including motion control sensors, microfluidic sensors, industrial sensors, and more.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electromagnetic Encoders Screen-Printed on Rubber Belts for Absolute Measurement of Position and Velocity

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herrojo, Cristian|||0000-0003-1934-9993
  • Moya Lara, Ana|||0000-0001-6793-9133
  • Berenguel-Alonso, Miguel|||0000-0002-3759-3634
  • Gonzalez, David|||0000-0003-4696-3606
  • Bruguera, Pep|||0000-0002-2435-6242
  • Delgado Simao, Claudia|||0000-0003-3837-9311
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents, for the first time, an absolute linear electromagnetic encoder consisting of a rubber belt with two chains of screen-printed metallic inclusions (rectangular patches). The position, velocity, and direction of the belt (the moving part) is determined by detecting the inclusions when they cross the stator (the static part). The stator is a microstrip line loaded with three complementary split ring resonators (CSRRs), resonant elements exhibiting a resonance frequency perturbed by the presence of inclusions on top of them (contactless). The line is fed by three harmonic signals tuned to the resonance frequencies of the CSRRs. Such signals are generated by a voltage-controlled oscillator (VCO) managed by a microcontroller. The sensed data are retrieved from the pulses contained in the envelope functions of the respective amplitude modulated (AM) signals (caused by the belt motion) generated at the output port of the line. One of the signals provides the absolute belt position, determined by one of the chains, the encoded one. The information relative to the velocity and motion direction is contained in the other AM signals generated by the motion of the other chain, periodic, and thereby, uncoded. The spatial resolution of the system, a figure of merit, is 4 mm. Special emphasis is devoted to the printing process of the belt inclusions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Embroidered textile frequency-splitting sensor based on stepped-impedance resonators

  • Vélez, Paris|||0000-0001-6502-5987
  • Martín, Ferran|||0000-0002-1494-9167
  • Fernández-García, Raúl|||0000-0002-4030-7256
  • Gil, Ignacio|||0000-0002-7175-5756
This paper presents an embroidered textile frequency-splitting microwave sensor based on a pair of identical stepped-impedance resonators (SIRs) loading a microstrip transmission line. The sensor is implemented by means of conductive threads. The sensing region of the proposed structure is the capacitive square patch of one of the SIRs. If such region is kept unaltered, the structure is symmetric, and the frequency response (transmission coefficient) exhibits a single transmission zero. However, if symmetry is broken (e.g., through liquid absorption in the sensing region), the frequency response of the proposed sensor exhibits two transmission zeros (frequency splitting). The difference (in frequency and magnitude) between such zeros (or notches) is intimately related to the dielectric properties of the absorbed liquids to be sensed //μl/μl.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strategies to enhance the data density in synchronous electromagnetic encoders

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, we report two different strategies to enhance the data density in electromagnetic encoders with synchronous reading. One approach uses a periodic chain of rectangular metallic patches (clock chain) that determines the encoder velocity, and dictates the instants of time for retrieving the bits of the identification (ID) code. However, contrary to previous electromagnetic encoders, the ID is inferred at both the rising and the falling edges of the clock signal generated by the clock chain. Moreover, the bits of information are not given by the presence or absence of metallic patches at their predefined positions in the so-called ID code chain. With this novel encoding system, a bit state corresponding to a certain instant of time is identical to the previous bit state, unless there is a change in the envelope function of the ID code signal, determined by the additional non-periodic ID code chain. The other encoding strategy utilizes a single chain of C-shaped resonators, and encoding is achieved by considering four different resonator dimensions, corresponding to four states and, hence, to two bits per resonator of the chain. Thus, with these two strategies, the data density is twice the one achievable in previously reported synchronous electromagnetic encoders.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Circuit Analysis of a Coplanar Waveguide (CPW) Terminated With a Step-Impedance Resonator (SIR) for Highly Sensitive One-Port Permittivity Sensing

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Ebrahimi, Amir|||0000-0002-1787-2230
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a single-frequency reflective-mode phase-variation microwave sensor devoted to the dielectric characterization of materials. The device is implemented in coplanar waveguide (CPW) technology and consists of two parts: (i) the sensing region, a step-impedance resonator (SIR) as termination of a CPW transmission line, and (ii) the design region, a cascade of high/low impedance quarter-wavelength inverters, used to boost up the sensitivity. By placing the so-called material under test (MUT) on top of the sensing region, the capacitance of the SIR is altered due to the effects of the dielectric constant of the MUT. This modifies the phase of the reflection coefficient seen from the input port, the output variable. From a circuit analysis, it is demonstrated that the sensitivity for small perturbations in the vicinity of the dielectric constant of a reference (REF) material can be optimized by setting the operation frequency of the sensor to the resonance frequency of the SIR loaded with such REF material. The maximum sensitivity in one of the reported sensors is as high as 66.5°, and the main figure of merit, defined as the ratio between the maximum sensitivity and the area of the sensing region expressed in terms of the squared guided wavelength, is FoM=3643∘/λ2 . Such figure of merit represents a significant improvement as compared to the one of the equivalent sensor implemented by means of an open-ended quarter-wavelength sensing line. Such equivalence between the semi-lumped element (i.e., SIR-based) sensor and the fully distributed counterpart is also analyzed in the paper.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Techniques to Improve the Performance of Planar Microwave Sensors, A Review and Recent Developments

  • Abdolrazzaghi, Mohammad|||0000-0002-4811-8660
  • Nayyeri, Vahid|||0000-0002-0328-4737
  • Martín, Ferran|||0000-0002-1494-9167
Planar microwave sensors have become increasing developed in recent decades, especially in material characterization (solid/liquid) as they provide regions highly sensitive to the surrounding medium. However, when it comes to deciphering the content of practical biological analytes or chemical components inside a host medium, even higher sensitivities are required due to their minute concentrations. This review article presents a comprehensive outlook on various methodologies to enhance sensitivity (e.g., coupling resonators, channel embedding, analyte immobilization, resonator pattern recognition, use of phase variation, using coupled line section, and intermodulation products), resolution (active sensors, differential measurements), and robustness (using machine learning) of arbitrary sensors of interest. Some of the most practical approaches are presented with prototype examples, and the main applications of incorporating such procedures are reported. Sensors with which the proposed techniques are implemented exhibit higher performance for high-end and real-life use.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Portable Reflective-Mode Phase-Variation Microwave Sensor Based on a Rat-Race Coupler Pair and Gain/Phase Detector for Dielectric Characterization

  • Vélez, Paris|||0000-0001-6502-5987
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Elgeziry, Mahmoud|||0000-0002-2801-2826
  • Su, Lijuan|||0000-0002-4753-9340
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Costa, Filippo|||0000-0001-7572-2014
  • Genovesi, Simone|||0000-0002-5323-1780
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a low-cost and portable phase-variation planar microwave sensor operating in reflective mode, where the output variable, the phase of the reflection coefficient of the one-port sensing element, is retrieved by means of a distributed circuit based on a pair of rat-race hybrid couplers and the associated electronics. This includes a microcontroller, a voltage controlled oscillator (VCO), a digital-to-analog converter (DAC), and an RF/microwave gain/phase detector. By this means, vector network analyzers (VNAs), i.e., high-cost instruments typically used for obtaining the reflection coefficient in one-port structures or circulators (microwave components able to separate the injected signal from the reflected signal in any one-port network) are avoided. Indeed, the presented architecture (including the microwave rat-race hybrid configuration and the associated electronics) can be adapted to other one-port reflective-mode phase-variation microwave sensors. A prototype example, where the sensing element is a one-port step-impedance open-ended transmission line, is reported. The device provides the phase of the reflection coefficient of the sensing element as a function of the dielectric constant of the material under test (MUT) with a maximum sensitivity of -65.7° and a relative error of less than 8% in all the measurements.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Frequency-Coded and Programmable Synchronous Electromagnetic Encoders Based on Linear Strips

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents electromagnetic encoders where encoding is achieved by considering four different inclusions, particularly linear strips of different length, etched at the predefined positions of the encoder chain, and transversely oriented with regard to the chain axis. Since the length of the strips determines their resonance frequencies, it follows that the 2-bits per inclusion, corresponding to the four possible different states (strip lengths), are frequency-coded. Thus, the reader is a microstrip line with a series gap fed by four harmonic (carrier) signals tuned to the resonance frequencies of the four considered encoder strips. By encoder motion over the reader, each carrier signal is amplitude modulated, with envelope functions exhibiting a peak each time a strip of the encoder chain tuned to the resonance frequency of the considered carrier signal crosses the axis of the reader line. The functionality of the system is experimentally validated in this letter. It is also shown that the encoders can be programmed by considering identical strips and by cutting them appropriately, according to the desired code. The proposed encoders are intrinsically synchronous. Such encoders are useful for measuring displacements and velocities, as well as for the implementation of synchronous near-field chipless radiofrequency identification tags with sequential bit reading.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High Data Density Absolute Electromagnetic Encoders Based on Hybrid Time/Frequency Domain Encoding

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a novel concept for the implementation of electromagnetic encoders exhibiting very high data density per unit length (DPL), a figure of merit (FoM) of such systems. Encoding is based on a hybrid scheme that exploits both the frequency and time domains. The encoders consist of rows of inclusions (linear strips) of different sizes, periodically arranged to form a chain (with four columns). The bits corresponding to each row are read sequentially in a time-division multiplexing scheme, whereas the size of the inclusions provides frequency encoding. The main relevant aspect of the proposed system concerns the reader, based on a power splitter architecture with either two outputs (prototype A) or four outputs (prototype B). It is shown that the data capacity per row in one of the encoders read through prototype B is 8.78 bits, whereas the data density is as high as DPL = 29.26 bit/cm, an unprecedented value in this type of encoders. The proposed system can be used as a near-field synchronous chipless-radio frequency identification (RFID) system, or as a position and velocity sensor. In the latter case, the system is able to provide the absolute encoder position, provided the number of bits per row (or position) is enough to discern the different number of encoder positions (up to 440 different positions for prototype B, corresponding to the indicated number of bits).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Motion Control System for Industrial Scenarios Based on Electromagnetic Encoders

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Moya Lara, Ana|||0000-0001-6793-9133
  • Berenguel-Alonso, Miguel|||0000-0002-3759-3634
  • Gonzalez, David|||0000-0003-4696-3606
  • Bruguera, Pep|||0000-0002-2435-6242
  • Delgado Simao, Claudia|||0000-0003-3837-9311
  • Martín, Ferran|||0000-0002-1494-9167
In this article, a complete system useful for the measurement of the absolute position, velocity, and acceleration of moving objects in industrial scenarios (such as conveyor transport devices, elevators, escalators, and other mechanical systems) is presented. The proposed system contains an electromagnetic encoder consisting of a pair of chains of metallic patches screen-printed on a rubber belt. In one of the chains (designated as clock/velocity chain), the patches are printed at predefined periodic positions. Such clock chain also generates the clock signal necessary to read the other chain (position chain), with patches either present (binary state "1") or absent (binary state "0") at their predefined positions. The system includes a reader based on a transmission line with three resonators etched on the ground plane and fed with three harmonic signals. Such three elements are complementary split ring resonators (CSRRs), which are sensitive to the presence of patches at short distance on top of them, and therefore, they are used to detect the patches as the encoder moves with regard to the reader. By encoder motion, the patches generate three amplitude modulation (AM) signals, providing the velocity (and acceleration), the absolute encoder position, and the motion direction. A prototype system, including the encoder, the reader, and the associated electronics, is designed, fabricated, and validated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Microwave Humidity Sensor for Early Detection of Sweat and Urine Leakage

  • Su, Lijuan|||0000-0002-4753-9340
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Martín, Ferran|||0000-0002-1494-9167
A planar microwave sensor devoted to the detection of humidity in underwear and clothes in general is proposed. The ultimate goal of the sensor is to detect the presence of liquids in fabrics, which is of interest to aid patients who suffer from certain pathologies, such as hyperhidrosis and enuresis. The main target in the design of the sensor, considering the envisaged application, is simplicity. Thus, the sensor operates at a single frequency, and the working principle is the variation in the magnitude of the transmission coefficient of a matched line loaded with an open-ended quarter-wavelength sensing stub resonator. The stub, which must be in contact with the so-called fabric under test (FUT), generates a notch in the transmission coefficient with a resonance frequency that depends on the humidity level of the fabric. By designing the stub with a moderately high-quality factor, the variation in the resonance frequency causes a significant change in the magnitude level at the operating frequency, which is the resonance frequency when the sensing stub is loaded with the dry fabric, and the presence of liquid can be detected by means of an amplitude detector. A prototype device is proposed and experimentally validated. The measured change in the magnitude level by simply depositing one 50 μL drop of water in the FUT is roughly 25 dB.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly sensitive reflective-mode phase-variation permittivity sensors using coupled line sections

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
Highly sensitive permittivity sensors operating in reflection and exploiting phase variation are presented in this article. The sensors are one-port structures implemented by means of a pair of coupled lines, the sensitive region, with an appropriate termination. In particular, it is demonstrated that by either short-circuiting the crossed port to the input port of the device (opening the remaining two ports), or opening the crossed port to the input port (terminating the other two ports with a short-circuit), the sensitivity can be driven to very high values, controlled by the coupling factor. For that purpose, the electrical length of the pair of coupled lines must be set to 90° when such lines are loaded with the reference (REF) material. Thus, the sensitivity is optimized for dielectric constants (the input variable) in the vicinity of the dielectric constant of the REF material, where the indicated phase condition is fulfilled. The output variable is the phase of the reflection coefficient, an easily measurable quantity. For validation purposes, three prototype sensors are designed and fabricated. The achieved sensitivities in two of the fabricated sensors are as high as 659.6° and 736.0°, with figures of merit (FoMs), or ratio between the maximum sensitivity and the area of the sensing region expressed in terms of the squared-wavelength, of FoM.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Losses Assisted Sensitivity Enhancement in Reflective-Mode Phase-Variation Permittivity Sensors Based on Weakly Coupled Distributed Resonators

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This letter demonstrates that losses [including substrate losses and losses in the material under test (MUT)] can be beneficial to boost the sensitivity in one-port reflective-mode phase-variation planar permittivity sensors based on a pair of weakly coupled quarter-wavelength resonators (the sensing elements). It is shown that the key aspect of optimizing the sensitivity in the limit of small perturbations of the dielectric constant of the MUT in the vicinity of the reference dielectric constant is to achieve a high slope in the phase of the reflection coefficient at the operating frequency and the output variable. Depending on the level of losses, such phase slope can be either negative (low-loss regime) or positive (high-loss regime). Nevertheless, the relevant aspect is that, regardless of its sign, the magnitude of the phase slope can be arbitrarily high by adequately designing the sensor considering the device and MUT losses. Thus, losses do not necessarily degrade sensitivity; instead, they can be strategically utilized to achieve unprecedented sensitivities in this type of sensor, which operates based on the measurement of the reflection coefficient phase.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Characterization of the denaturation of bovine serum albumin (BSA) protein by means of a differential-mode microwave microfluidic sensor based on slot resonators

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Peytral-Rieu, Olivia|||0000-0003-0404-1718
  • Vélez, Paris|||0000-0001-6502-5987
  • Dubuc, David
  • Grenier, Katia|||0000-0002-5056-5582
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a differential-mode microwave microfluidic sensor useful for the characterization/detection of the denaturation of Bovine Serum Albumin (BSA), a protein with numerous biochemical applications, caused by a chaotropic agent, specifically, urea. The sensor consists of a pair of uncoupled microstrip lines, each one loaded with a transversally oriented slot resonator, etched in the ground plane. The sensor is a device able to detect permittivity changes in the so-called material under test (MUT), or liquid under test (LUT), as compared to a reference (REF) material/liquid. However, since the changes in the permittivity of the BSA caused by the denaturation process are partially obscured by the presence of the urea in the LUT, a protocol to separate the effects of the urea in the sample is proposed. According to such protocol, two different BSA samples, with different concentrations, are needed. It is shown that, with such a method, the denaturation process can be detected and characterized through the so-called hydration contrast, related to the measured difference of the output variables (the cross-mode transmission coefficient) in both BSA samples. The reported protocol and denaturation detection method based on differential-mode microwave sensing, which has never been reported so far, provides hydration contrasts of 0.06 for 6M urea concentrations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reflective-mode phase-variation submersible sensor for liquid characterization

  • Su, Lijuan|||0000-0002-4753-9340
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
A one-port reflective-mode microwave submersible sensor based on an open-ended step-impedance microstrip line configuration, operating at a single frequency, useful for the dielectric characterization of liquids and the measurement of liquid composition in binary mixtures, is proposed in this article. The sensor constitutes two parts, namely, the microwave module, including the sensitive region, and a 3-D-printed case (made of polylactic acid-PLA), necessary for sealing, thus preventing from any liquid leakage to the nonsensing regions of the microwave module. To enhance the sensitivity, the open-ended line Section of the microwave module, i.e., the sensing region in contact with the liquid under test (LUT), is a quarter wavelength microstrip line with high impedance. Thus, the phase of the reflection coefficient is the output variable, highly dependent on the input variable-the dielectric constant of the LUT placed directly above the sensing region. In order to validate the sensing structure, a prototype device has been designed and fabricated. The average sensitivity to variations in the concentration of ethanol in solutions of deionized (DI) water is 1.22°/%, and sensor resolution is 2%. The fabricated sensor is resistant to liquid leakage, and therefore, it can be completely submerged for measuring purposes, acting as an effective measuring probe.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

AI-Assisted Ultra-High-Sensitivity/Resolution Active-Coupled CSRR-Based Sensor with Embedded Selectivity

  • Abdolrazzaghi, Mohammad|||0000-0002-4811-8660
  • Kazemi, Nazli|||0000-0002-6541-0233
  • Nayyeri, Vahid|||0000-0002-0328-4737
  • Martín, Ferran|||0000-0002-1494-9167
This research explores the application of an artificial intelligence (AI)-assisted approach to enhance the selectivity of microwave sensors used for liquid mixture sensing. We utilized a planar microwave sensor comprising two coupled rectangular complementary split-ring resonators operating at 2.45 GHz to establish a highly sensitive capacitive region. The sensor's quality factor was markedly improved from 70 to approximately 2700 through the incorporation of a regenerative amplifier to compensate for losses. A deep neural network (DNN) technique is employed to characterize mixtures of methanol, ethanol, and water, using the frequency, amplitude, and quality factor as inputs. However, the DNN approach is found to be effective solely for binary mixtures, with a maximum concentration error of 4.3%. To improve selectivity for ternary mixtures, we employed a more sophisticated machine learning algorithm, the convolutional neural network (CNN), using the entire transmission response as the 1-D input. This resulted in a significant improvement in selectivity, limiting the maximum percentage error to just 0.7% (≈6-fold accuracy enhancement).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synchronous Electromagnetic Encoders Based on Step-Impedance Resonators

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a new type of electromagnetic encoders based on step-impedance resonators (SIRs). The encoders consist of a linear chain of transversely oriented SIRs etched on a dielectric substrate, whereas the reader is a simple microstrip transmission line fed by a certain number of single-tone signals, i.e., three in one prototype, and four in another prototype, tuned to specific predefined frequencies. System functionality is based on detecting at which of such predefined frequencies (considering all possible combinations), each SIR of the chain resonates. Thus, the number of combinations (or states) per encoder position (or row) corresponding to the prototype fed with three single-tone signals is seven, whereas it is 15 for the prototype fed with four single-tone signals, corresponding to 2.81 and 3.91 bits, respectively, per encoder row. Although there are other synchronous electromagnetic encoders exhibiting a higher number of bits per row, the number of chains of those encoders is at least two, and the readers are complex microwave structures based on power splitters, contrary to the prototypes reported in this article. Enhancing the number of bits per row in these encoders is a fundamental aspect toward the implementation of true absolute electromagnetic encoders able to determine the position relative to the reader at any instant of time without the need to know the previous stages of encoder motion (a need in the incremental type and in the so-called quasi-absolute encoders).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phase-Variation Microwave Displacement Sensor With Good Linearity and Application to Breath Rate Monitoring

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a novel highly linear reflective-mode displacement sensor based on planar microwave technology. The sensor consists of two parts: 1) the stator, or reader, a one-port transmission line terminated with a matched load and 2) the movable part, or tag, a dielectric slab with an electric LC (ELC) resonator etched on it. In the proposed system, the resonator is allowed to displace longitudinally along the line axis of the reader at a fixed vertical distance (air gap). Due to magnetic coupling between the line and the ELC resonator, the feeding signal (a harmonic signal tuned to the resonance frequency of the ELC resonator) is totally reflected at the resonator's position, and the phase of the reflection coefficient, the output variable of the sensor, correlates with that position, i.e., it varies roughly linearly with the distance between the resonator and the input port. A prototype example, with a dynamic range of 4.40 cm, is reported, and validated at laboratory level by means of a linear displacement system. Then, the potential of the proposed sensor to monitor the breath rate in humans is discussed, and a belt-based prototype device system that can be applied for that purpose is presented and validated. The key idea is the chest and abdomen expansion due to breathing, which leads to a periodic relative displacement between the tag and the reader at the respiration rate.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid Time/Phase Domain Synchronous Electromagnetic Encoders for Near-Field Chipless-RFID and Motion Control Applications

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
Synchronous electromagnetic encoder systems exploiting phase encoding to boost up the number of bits per encoder position are reported in this article. The reader is a one-port structure consisting of a transmission line terminated with a matched load and fed by a harmonic (single tone) signal. The encoders, or tags, are implemented by means of a single chain of strip resonators (inclusions) printed or etched on a dielectric substrate and oriented transversally to the chain axis. Phase encoding is achieved through the transverse position of the strips in the chain. Thus, in a reading operation, the encoder is displaced at a very short distance over the reader, in the direction orthogonal to the line axis. By this means, the resonant strips of the encoder cross the line in perfect alignment with it, significantly perturbing the reflection (and transmission) coefficient. By tuning the frequency of the feeding signal to the resonance frequency of the strips, total reflection is (roughly) expected each time a resonant strip is on top of the line. Moreover, under perfect alignment between the line and a resonant strip, the phase of the reflection coefficient depends on the distance between the inclusion (resonant strip) and the input port. Therefore, the identification (ID) associated with that inclusion can be retrieved by measuring the phase of the reflection coefficient. The number of states (and hence bits) per encoder position in the chain depends on the number of different transverse positions of the inclusions that can be resolved (16 in the prototype reported in this article). The achieved density of bits per unit length is DPL = 5.71 bit/cm and per unit surface is DPS = 0.57 bit/cm2. Nevertheless, the main relevant advantage of the proposed phase-modulated (PM) system is the fact that a single harmonic signal suffices for tag reading, contrary to other synchronous electromagnetic encoder systems based on frequency encoding, where multiple feeding harmonic signals are needed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reflective-Mode Phase-Variation Permittivity Sensor Based on a Step-Impedance Microstrip Line Terminated With a Slot Resonator for Solid and Liquid Characterization

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This article proposes a highly sensitive single-frequency microwave sensor for dielectric characterization of solids and liquids. The sensor is a reflective-mode one-port device consisting of a step-impedance microstrip line terminated with a slot resonator (the sensing element) transversely etched on the ground plane. The working principle of the sensor is the variation experienced by the phase of the reflection coefficient at the operating frequency as a consequence of changes in the dielectric properties (dielectric constant) of the material under test (MUT), either a solid or a liquid, which should be in contact with the slot resonator. A relevant advantage of the reported sensor is the fact that the MUT is located in the back substrate side of the microstrip structure. Therefore, any potential interaction between the MUT, including the mechanic holder used for liquid sensing, and the microstrip line, is prevented. A detailed sensitivity analysis that considers the effects of losses is carried out. It is concluded that, depending on the losses of the MUT, there are two different sensor operation regimes (the low-loss and the high-loss regimes), with unequal behavior, but both are useful to sensitively detect changes in the dielectric properties of the MUT. The maximum sensitivity in the prototype device devoted to the measurement of the dielectric constant in low-loss solid samples is 255.5 ∘. In the liquid sensor, equipped with a 3-D-printed holder, and focused in this article on the detection of small volume fractions of isopropanol in deionized (DI) water, the maximum sensitivity is 64.96 ∘ /%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effects of losses on the sensitivity of reflective-mode phase-variation liquid sensors

  • Vélez, Paris|||0000-0001-6502-5987
  • Canalias, Xavier|||0009-0002-6473-7514
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This article is focused on the analysis of the effects of losses on the sensitivity of reflective-mode phase-variation liquid sensors implemented by means of an open-ended (either quarter-wavelength or half-wavelength) transmission line distributed resonator (the sensing element) cascaded to a set of high/low impedance inverters (implemented by means of quarter-wavelength line sections). The device operates at a single frequency, and the working principle is the variation of the phase of the reflection coefficient (the output variable) caused by changes in the dielectric properties of the material under test (MUT), a liquid in this study. Since liquids are lossy samples, it is expected that the sensitivity of the sensor is influenced by losses, an aspect demonstrated in this article. It is shown that two operation regimes can be distinguished: 1) the low-loss regime, where the sensitivity is influenced by MUT losses, but the behavior is similar to the one of the lossless case and 2) the high-loss regime, where losses not only play a key role on the sensitivity but also modify the dependence of the output variable with the dielectric constant of the liquid under consideration compared to the lossless case. Nevertheless, contrary to general belief, with an adequate sensor design, losses might be beneficial in order to boost the sensitivity in the limit of small perturbations (this is the main contribution of this article). Validation is carried out by considering different types of oil samples and various sensing devices operating either in the low-loss regime or the high-loss regime.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Toward a low-cost portable reader for reflective-mode microwave sensors

  • Elgeziry, Mahmoud|||0000-0002-2801-2826
  • Costa, Filippo|||0000-0001-7572-2014
  • Vélez, Paris|||0000-0001-6502-5987
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Genovesi, Simone|||0000-0002-5323-1780
Microwave sensors are typically characterized using a vector network analyzer (VNA) that measures the scattering parameters of the device under test (DUT) over a wide frequency band with great accuracy. However, these features of the VNA are not always required, and its bulky form factor and high cost can even be a limitation in many practical scenarios, such as microwave sensors, which are generally characterized by low cost, a small footprint, and often planar profiles. This article presents a novel, low-cost portable reader for reflective-mode microwave sensors. The proposed device is based on a hybrid 180° directional coupler that separates the input signal from the reflected one, a voltage-controlled oscillator (VCO) to generate the input signal, and a gain/phase detector board. The performance of the proposed system has been experimentally assessed for reference load cases, showing a good match between the simulated and measured results. The capability and usefulness of the proposed device are demonstrated through the implementation of a reflective-mode distance sensor where the input impedance of the one-port sensing element is the output variable of interest. The results obtained with the proposed reader well match the VNA measurements, with a mean error of about 8%. It is worth noting that the presented solution can be easily adopted as the measurement device by other reflective-mode sensors operating in the frequency band of the coupler. Overall, the proposed novel reader offers a new approach to measuring the output variable of one-port reflective-mode microwave sensors that is battery-powered, portable, versatile, accurate, and cost-effective compared with using a VNA.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly Sensitive Coplanar Waveguide (CPW) reflective-mode phase-variation permittivity sensors based on weakly coupled Step-Impedance Resonators (SIRs)

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a small-sized and highly sensitive planar microwave permittivity sensor based on a pair of weakly coupled step-impedance resonators (SIRs), the sensing elements. The sensor, a one-port structure, is implemented in coplanar waveguide (CPW) technology, and it operates in the reflection mode. The sensing principle is the variation in the phase of the reflection coefficient at the operating frequency, the output variable, caused by the changes in the dielectric constant of the material under test (MUT). This article demonstrates that the maximum sensitivity is inversely proportional to the square of the electric coupling coefficient between the sensing SIRs. Thus, the sensitivity can be unprecedentedly enhanced by merely separating enough the coupled SIRs (thereby reducing their mutual coupling). Since the sensing area is circumscribed to the region occupied by the square (capacitive) patches of the SIRs, it follows that the proposed sensor exhibits also a very high figure of merit ( FoM=26551∘/λ2 ), or ratio between the maximum sensitivity and the size of the sensing area expressed in terms of the squared guided wavelength, λ2.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid time/phase/frequency domain linear electromagnetic encoders for displacement sensing and near-field chipless-RFID

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
Hybrid time/phase/frequency domain linear electromagnetic encoders are presented in this paper for the first time. The encoders consist of a linear chain of electric-LC (ELC) resonators etched in a dielectric substrate. Encoding is achieved by phase and frequency modulation simultaneously, namely, by considering different transverse positions and dimensions of the ELC resonators in the chain. The reader is a simple matched microstrip transmission line terminated with a matched load, and encoder reading proceeds by displacing the encoder over the reader line, at short distance, in the direction orthogonal to the line axis. When an ELC resonator lies on top of the line, the phase of the reflection coefficient at resonance depends on the distance to the input port and hence on the transverse position of the resonator in the chain (phase modulation). Moreover, the size of the resonator determines its resonance frequency (frequency modulation). This means that the reader line should be fed by as many harmonic signals as ELC resonator sizes considered, to identify the phase and the resonance frequency of the inclusion (ELC) on top of the line. In this paper, we consider 16 different transverse positions and 4 different sizes of the ELC resonators, which are read sequentially, in a time-division multiplexing scheme. Thus, 6 bits per encoder position (or row) in the chain are achieved. These encoders, with a per-unit-length density of bits of DPL = 6 bit/cm, can be applied to the implementation of synchronous near-field chipless-RFID systems with high data capacity, as well as long-range displacement sensors. In the latter case, the number of bits per encoder row can be doubled (i.e., 12 bits) by considering two chains and two readers, allowing for the discrimination of 212 (= 4096) absolute positions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly sensitive lossy tunable permittivity sensor

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Canalias, Xavier|||0009-0002-6473-7514
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents a novel lossy tunable permittivity sensor that enhances sensitivity through a controllable conductivity method using a junction field-effect transistor (JFET) in the ohmic region. The sensor, a one-port reflective-mode device, includes a coplanar waveguide (CPW) ending in a step impedance resonator (SIR) as the sensing element, with the JFET bridging the SIR patch and ground. The high sensitivity is achieved by virtue of the strong shift in the phase of the reflection coefficient at resonance experienced by varying the dielectric constant of the material under test (MUT). This device not only serves as a permittivity sensor but also for tracking variables linked to permittivity changes. Our experimental results uniquely demonstrate that sensitivity to minute perturbations can be significantly enhanced by tuning losses. The prototype, designed and constructed for detecting submillimeter proximity changes with a dielectric slab, achieves a peak sensitivity of 2291°/mm within a compact 8.5×12 -mm footprint.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Microwave Displacement Sensor With Good Linearity and Dynamic Range Based on a Microstrip Line Pair Loaded With Movable Electric-LC Resonators

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Sisó, Gerard|||0000-0003-2576-6558
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a linear displacement sensor exhibiting good linearity and dynamic range. The sensor consists of a pair of parallel microstrip lines both terminated with a matched load (the static part) and a pair of electric-LC (ELC) resonators tuned to different (but closely spaced) frequencies, etched in a movable substrate. By feeding the lines with harmonic signals tuned to the resonance frequencies of the ELC resonators, such signals are completely reflected back to the source provided that the ELCs are on top of the lines, coupled to them (i.e., at short distance and with adequate orientation). The phase of the reflection coefficient of each line depends on the frequency of the feeding signal as well as on the distance between the input port and the corresponding ELC resonator and repeats every half-wavelength. Thus, by displacing the ELC pair longitudinally (axially) along the line pair, the position of the ELC pair with regard to the input ports can be retrieved. The main relevant advantage of the proposed structure is that the pair of phases of the reflection coefficients (the output variable) exhibits a periodic pattern with an ELC position that repeats each time the ELC pair has displaced a distance corresponding to the minimum common multiple (MCM) of the half-wavelengths of each signal. Thus, by considering closely spaced ELC frequencies (and hence half-wavelengths), the input dynamic range can be dramatically enhanced. This idea is validated by means of two designed and fabricated prototype displacement sensors fed with harmonic signals tuned to 2.0 and 2.5 GHz in one case and tuned to 2.1 and 2.3 GHz in the other case.