Pasar al contenido principal

ELECTROCATALISIS PARA LA PRODUCCION SOSTENIBLE DE COMBUSTIBLES Y PRODUCTOS QUIMICOS DE ALTOO VALOR AÑADIDO

PID2020-116093RB-C42

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIO INSTITUT DE RECERCA DE L ENERGIA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mesopore-Augmented Electrochemical CO2 Reduction on Nitrogen-Doped Carbon

  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Roldan, Alberto|||0000-0003-0353-9004
  • Ceccato, Marcel|||0000-0002-5510-7951
  • Lock, Nina|||0000-0003-1874-8773
  • Pedersen, Steen Uttrup|||0000-0002-8919-2576
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Daasbjerg, Kim|||0000-0003-0212-8190
The electrochemical carbon dioxide reduction reaction (eCORR) using nitrogen-doped carbon (N-C) materials offers a promising and cost-effective approach to global carbon neutrality. Regulating the porosity of N-C materials can potentially increase the catalytic performance by suppressing the concurrence of the hydrogen evolution reaction (HER). However, the augmentation of porosity usually alters the active sites or the chemical composition of catalysts, resulting in intertwined influences of various structural factors and catalytic performance. In this study, incorporating secondary carbon sources into the metal-organic framework (MOF) precursor through nanocasting aimed to selectively enhance the mesoporous structure, allowing for deciphering this effect from other changes in the catalyst composition. Consequently, the developed N-C catalyst exhibited a significant surface area with abundant mesopores, leading to a maximum Faradaic efficiency (FE) for carbon monoxide (CO) of 95% at -0.50 V versus the reversible hydrogen electrode (vs. RHE). Furthermore, the FE for CO is enhanced across a wide potential range, surpassing previously reported metal-free N-C eCORR catalysts. The investigation reveals that constructing mesoporous structures can induce excellent CO catalysis by enhancing the accessibility of active sites while establishing an elevated local pH at these sites.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering the Interfacial Microenvironment via Surface Hydroxylation to Realize the Global Optimization of Electrochemical CO2Reduction

  • Han, Xu
  • Zhang, Ting
  • Biset-Peiró, Martí
  • Zhang, Xuan
  • Li, Jian
  • Tang, Weiqiang
  • Tang, Peng-Yi
  • Morante, Joan Ramón
  • Arbiol, Jordi
The adsorption and activation of CO2 on the electrode interface is a prerequisite and key step for electrocatalytic CO2 reduction reaction (eCO2 RR). Regulating the interfacial microenvironment to promote the adsorption and activation of CO2 is thus of great significance to optimize overall conversion efficiency. Herein, a CO2-philic hydroxyl coordinated ZnO (ZnO-OH) catalyst is fabricated, for the first time, via a facile MOF-assisted method. In comparison to the commercial ZnO, the as-prepared ZnO-OH exhibits much higher selectivity toward CO at lower applied potential, reaching a Faradaic efficiency of 85% at -0.95 V versus RHE. To the best of our knowledge, such selectivity is one of the best records in ZnO-based catalysts reported till date. Density functional theory calculations reveal that the coordinated surficial -OH groups are not only favorable to interact with CO2 molecules but also function in synergy to decrease the energy barrier of the rate-determining step and maintain a higher charge density of potential active sites as well as inhibit undesired hydrogen evolution reaction. Our results indicate that engineering the interfacial microenvironment through the introduction of CO2-philic groups is a promising way to achieve the global optimization of eCO2 RR via promoting adsorption and activation of CO2., The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. X.H., T.Z., J.R.M., and J.A. acknowledge funding from the projects (PID2020-116093RB-C42 and -C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706). ICN2 and IREC are funded by the CERCA Programme/Generalitat de Catalunya. X.Z. acknowledges funding from FWO project (12ZV320N). X.H. thanks China Scholarship Council for scholarship support (201804910551).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improvement of carbon dioxide electroreduction by crystal surface modification of ZIF-8

  • Zhang, Ting
  • Liu, Hong
  • Han, Xu
  • Biset-Peiró, Martí
  • Yang, Yunhui
  • Imaz, Inhar
  • Maspoch, Daniel
  • Yang, Bo
  • Morante, Joan Ramón
  • Arbiol, Jordi
Metal-organic frameworks (MOFs) possess high CO2 adsorption properties and are considered to be a promising candidate for the electrochemical carbon dioxide reduction reaction (eCO2RR). However, their insufficient selectivity and current density constrain their further exploration in the eCO2RR. In this work, by introducing a very small proportion of 2,5-dihydroxyterephthalic acid (DOBDC) into ZIF-8, a surface modified ZIF-8-5% catalyst was synthesized by a post-modification method, exhibiting enhanced selectivity (from 56% to 79%) and current density (from -4 mA cm-2 to -10 mA m-2) compared to ZIF-8. Density functional theory (DFT) calculations further demonstrate that the boosted eCO2RR performance on ZIF-8-5% could be attributed to the improved formation of the *COOH intermediate stemming from successful DOBDC surface modification. This work opens a new path for improving the catalytic properties of MOFs via their surface modification., The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457. T. Z., J. R. M. and J. A. acknowledge funding from the projects (PID2020-116093RB-C42 and -C43) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union”. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (grant no.: CEX2021-001214-S). ICN2 and IREC are funded by the CERCA Programme/Generalitat de Catalunya. A part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. T. Z. has received funding from the CSC-UAB PhD scholarship program (201706180028). X. H. and Y. H. Y. thank China Scholarship Council for scholarship support (201804910551 and 201806650010)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible and Binder-Free Iron Phosphide Electrodes Using a Three-Dimensional Support for High Hydrogen Productivity

  • Díez-García, María Isabel
  • García Blanco, Andrés Alberto
  • Murcia-López, Sebastián
  • Botifoll, Marc
  • Arbiol, Jordi
  • Qamar, Mohammad
  • Morante, Joan Ramón
In this work, an inexpensive and reliable microstructured electrode for the hydrogen evolution reaction (HER) is developed. This cathode is made of Earth-abundant elements consisting of iron phosphide as an electrocatalyst and carbon felt (CF) as a flexible conductive scaffold. Its porous character and binder-free FeP coverage over the carbon fibers generate a high number of accessible active sites for the reaction, achieving a high value of the electrochemically active surface area. The electrode reaches 100 mA ⋅ cm−2 by applying only −53 mV vs RHE at 50 °C in 0.5 M H2SO4, demonstrating excellent electrocatalytic activity for the HER and outstanding stability in acidic electrolyte. Furthermore, the feasibility of these electrodes for industrial application is evaluated using a PEM electrolyzer. The developed prototype with a cathodic area of 1.8 cm2 shows a very promising performance, reaching 14.9 mmol H2 ⋅ h−1 ⋅ cm−2 (corresponding to 800 mA ⋅ cm−2) at a voltage of only 2.1 V., M.I. acknowledges the support from Ministerio de Ciencia e Innovación in Spain through Juan de la Cierva fellowship (FJC2018-036229-I). The authors extend their overall appreciation to the Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia for funding this research work through the project number DRI 598. The project on which these results are based has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement No. 801342 (Tecniospring INDUSTRY) and the Government of Catalonia's Agency for Business Competitiveness (ACCIÓ). ICN2 and IREC acknowledge funding from Generalitat de Catalunya 2021 SGR 00457 and 2021 SGR 01581, respectively. The authors thank support from the projects NANOGEN (PID2020-116093RB−C43) and CERES (PID2020-116093RB−C42) funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR−C17.I1) and Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). ICN2 and IREC are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. M.B. acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref. 2020 FI 00103., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrothermal Fabrication of Carbon-Supported Oxide-Derived Copper Heterostructures: A Robust Catalyst System for Enhanced Electro-Reduction of CO2 to C2 H4

  • Tandava, Venkata S. R. K.
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Murcia-López, Sebastián
  • Morante, Joan Ramón
Anthropogenic CO2 can be converted to alternative fuels and value-added products by electrocatalytic routes. Copper-based catalysts are found to be the star materials for obtaining longer-chain carbon compounds beyond 2e- products. Herein, we report a facile hydrothermal fabrication of a highly robust electrocatalyst: in-situ grown heterostructures of plate-like CuO-Cu2 O on carbon black. Simultaneous synthesis of copper-carbon catalysts with varied amounts of copper was conducted to determine the optimum blend. It is observed that the optimum ratio and structure have aided in achieving the state of art faradaic efficiency for ethylene >45 % at -1.6 V vs. RHE at industrially relevant high current densities over 160 to 200 mA ⋅ cm-2 . It is understood that the in-situ modification of CuO to Cu2 O during the electrolysis is the driving force for the highly selective conversion of CO2 to ethylene through the *CO intermediates at the onset potentials followed by C-C coupling. The excellent distribution of Cu-based platelets on the carbon structure enables rapid electron transfer and enhanced catalytic efficiency. It is inferred that choosing the right composition of the catalyst by tuning the catalyst layer over the gas diffusion electrode can substantially affect the product selectivity and promote reaching the potential industrial scale., .S.R.K.T. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 754397. IREC and ICN2 acknowledge Generalitat de Catalunya for financial support through the CERCA Program. The authors thank the support from NANOGEN (PID2020-116093RB-C43) and CERES projects (PID2020-116093RB-C42), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327. This study was also supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1). ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A MOF-based spatial-separation layer to enable a uniform favorable microenvironment for electrochemical CO2 reduction

  • Han, Xu
  • Zhang, Ting
  • Biset-Peiró, Martí
  • Zhao, Siqi
  • Murcia-López, Sebastián
  • Daasbjerg, Kim
  • Morante, Joan Ramón
  • Li, Jian
  • Arbiol, Jordi
Regulating the local microenvironment of active sites to increase their specific CO2 concentration and pH gradient, is a promising approach to optimize the electrochemical CO2 reduction reaction (eCO2RR). However, currently reported morphological strategies display an uncertainty to the compatibility and distribution between catalytic sites and their microenvironment. Here, a uniform spatial-separation metal–organic framework (MOF) layer between active sites and bulk electrolyte is proposed, which enables each active site to locate in a similarly favorable microenvironment. Zinc oxide (ZnO) nanorods (NR), a representative electrocatalyst for eCO2RR, is covered with a Zeolitic imidazolate framework-8 (ZIF-8) thin layer to serve as a model system. The prepared ZnO NR@ZIF-8 exhibits an enhanced Faradaic efficiency toward CO at a wide range of potentials and reaches a maximum FE of CO (85%) at −1.05 V versus reversible hydrogen electrode, which is one of the best records till date. Moreover, the hydrophobic ZIF-8 layer protects ZnO against self-reduction. Such performance benefits from the porous ZIF-8 shell with high CO2 affinity, realizing efficient CO2 access and retaining an increased local pH near ZnO active sites., The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457. X.H., T.Z., M.B.-P., S.M.L., J.R.M., and J.A. acknowledge funding from the projects (Grant nos. PID2020-116093RB-C42 and -C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant no. CEX2021-001214-S). S.Z. and K.D. acknowledge Novo Nordisk Foundation CO2 Research Center (Grant no. NNF21SA0072700). ICN2 and IREC are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. X.H. thanks China Scholarship Council for scholarship support (Grant no. 201804910551)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct operando visualization of metal support interactions induced by hydrogen spillover during CO2 hydrogenation

  • Jenkinson, Kellie
  • Spadaro, Maria Chiara
  • Golovanova, Viktoria
  • Andreu, Teresa
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Bals, Sara
The understanding of catalyst active sites is a fundamental challenge for the future rational design of optimized and bespoke catalysts. For instance, the partial reduction of Ce4+ surface sites to Ce3+ and the formation of oxygen vacancies are critical for CO2 hydrogenation, CO oxidation, and the water gas shift reaction. Furthermore, metal nanoparticles, the reducible support, and metal support interactions are prone to evolve under reaction conditions; therefore a catalyst structure must be characterized under operando conditions to identify active states and deduce structure-activity relationships. In the present work, temperature-induced morphological and chemical changes in Ni nanoparticle-decorated mesoporous CeO2 by means of in situ quantitative multimode electron tomography and in situ heating electron energy loss spectroscopy, respectively, are investigated. Moreover, operando electron energy loss spectroscopy is employed using a windowed gas cell and reveals the role of Ni-induced hydrogen spillover on active Ce3+ site formation and enhancement of the overall catalytic performance., K.J. and S.B. acknowledge funding from ERC Consolidator Grant #815128 – REALNANO and European Union's Horizon 2020 research and innovation program under grant agreement #823717 – ESTEEM3. The authors want to acknowledge Dr. Wiebke Albreacht and Prof. dr. Thomas Altantzis for their contribution to discussions and initial experimentation. ICN2 and IREC acknowledge funding from Generalitat de Catalunya 2021SGR00457 and 2021SGR01581, respectively. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank support from the projects PID2019-108136RB-C33, PID2020-116093RB-C42, and -C43, funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX 21-001214-S). ICN2 and IREC are funded by the CERCA Programme / Generalitat de Catalunya. This study was supported by EU HORIZON INFRA TECH 2022 project IMPRESS (Ref.: 101094299). IREC thanks support from H2020 MSCA CO-Fund 2016 program DOC-FAM. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR C17.I1) and by Generalitat de Catalunya. The present work is a collaboration within e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mesopore-augmented electrochemical CO2 reduction on nitrogen-doped carbon

  • Han, Xu
  • Zhang, Ting
  • Biset-Peiró, Martí
  • Roldan, Alberto
  • Ceccato, Marcel
  • Lock, Nina
  • Pedersen, Steen Uttrup
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Daasbjerg, Kim
The electrochemical carbon dioxide reduction reaction (eCO2RR) using nitrogen-doped carbon (N-C) materials offers a promising and cost-effective approach to global carbon neutrality. Regulating the porosity of N-C materials can potentially increase the catalytic performance by suppressing the concurrence of the hydrogen evolution reaction (HER). However, the augmentation of porosity usually alters the active sites or the chemical composition of catalysts, resulting in intertwined influences of various structural factors and catalytic performance. In this study, incorporating secondary carbon sources into the metal-organic framework (MOF) precursor through nanocasting aimed to selectively enhance the mesoporous structure, allowing for deciphering this effect from other changes in the catalyst composition. Consequently, the developed N-C catalyst exhibited a significant surface area with abundant mesopores, leading to a maximum Faradaic efficiency (FE) for carbon monoxide (CO) of 95% at -0.50 V versus the reversible hydrogen electrode (vs. RHE). Furthermore, the FE for CO is enhanced across a wide potential range, surpassing previously reported metal-free N-C eCO2RR catalysts. The investigation reveals that constructing mesoporous structures can induce excellent CO2 catalysis by enhancing the accessibility of active sites while establishing an elevated local pH at these sites., Part of this work was supported by the Novo Nordisk Foundation CO2 Research Center (CORC) with grant number NNF21SA0072700 and is published under the number CORC_24_19. X.H. and T.Z. acknowledge support from Marie Skłodowska-Curie grant agreement numbers 101146498 and 101105092. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunyan (In-CAEM Project). ICN2 is founding member of e-DREAM(https://doi.org/10.1017/S1431927622010893). . IREC thanks the support from PID2020-116093RB-C42/AEI/ and 2021SGR001581 The authors thank Guillaume Sauthier and Javier Saiz for the XPS spectrum and FTIR tests. The authors acknowledge supercomputing Wales for access to the Hawk HPC facility, which the European Regional Development Fund partly funded via the Welsh Government. All computational data created during this research are available from the University of Cardiff Research Portal orca websites http://doi.org/10.17035/d.2024.0325942021., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-Electrode Tandem Electrocatalysis with Dual TiO2@Cu and Cu Surfaces Enables Energy-Efficient Ammonia Production from Nitrate

  • Chávez, Marcelo E.
  • Khairani, Inna Y.
  • Biset-Peiró, Martí
  • Martí-Sànchez, Sara
  • Villa, Katherine
  • Arbiol, Jordi
  • Morante, Joan Ramón
  • Gökce, Bilal
  • Murcia-López, Sebastián
Electrochemical ammonia synthesis from nitrate can complement a hydrogen-based energy system with a liquid, shippable energy carrier. Ammonia (NH3) is attractive because it serves both as an energy vector and as an essential feedstock. However, nitrate reduction is an eight-electron, proton-coupled pathway that forms multiple intermediates; the NO3– → NO2– step is widely viewed as rate-determining, followed by nitrite reduction and hydrogenation steps, until the formation of NH3. Here, we implement a tandem strategy in a flow cell using a double-sided electrode with Cu and TiO2@Cu surfaces that cooperatively boost the NO3– → NO2– and NO2– → NH3 conversions. The system achieves a Faradaic efficiency toward NH3 of 97%, with an NH3 selectivity of 80%, and a productivity of 7.7 mg h–1 cm–2 (0.45 mmol h–1 cm–2), corresponding to a full-cell energy efficiency of 29%. This integrated electrode–reactor design expands the accessible performance space for the NO3RR by combining nitrate adsorption with selective nitrite hydrogenation. These results establish a practical route for the efficient electrochemical synthesis of NH3 from nitrate., IREC and UW acknowledge financial support from the LESGO project (Code: 952068. H2020-EU.1.2.2. funded). IREC thanks Generalitat de Catalunya for financial support through the CERCA Program and M2E (2021_SGR01581). IREC also acknowledges support from the European Regional Development Funds (ERDF, FEDER) and by MCIN/AEI/10.13039/501100011033 CERES project (PID2020 116093RB-C42). M.E.C. acknowledges the Formacion Profesional de Investigadores Program (PRE2018-083575). S.M.L gratefully acknowledges grant RYC2022-036510-I funded by MICIU/AEI/10.13039/501100011033 and by ESF+. ICN2 is funded by the CERCA Program/Generalitat de Catalunya. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors acknowledge the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). ICN2 is a founding member of e-DREAM. (62) Authors kindly thank Dr. Georgiana Stoica for her assistance in the EPR characterization., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Engineering the Interfacial Microenvironment via Surface Hydroxylation to Realize the Global Optimization of Electrochemical CO Reduction

  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Zhang, Xuan|||0000-0002-3667-4280
  • Li, Jian
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Tang, PengYi|||0000-0002-2306-095X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The adsorption and activation of CO on the electrode interface is a prerequisite and key step for electrocatalytic CO reduction reaction (eCO RR). Regulating the interfacial microenvironment to promote the adsorption and activation of CO is thus of great significance to optimize overall conversion efficiency. Herein, a CO-philic hydroxyl coordinated ZnO (ZnO-OH) catalyst is fabricated, for the first time, via a facile MOF-assisted method. In comparison to the commercial ZnO, the as-prepared ZnO-OH exhibits much higher selectivity toward CO at lower applied potential, reaching a Faradaic efficiency of 85% at -0.95 V versus RHE. To the best of our knowledge, such selectivity is one of the best records in ZnO-based catalysts reported till date. Density functional theory calculations reveal that the coordinated surficial -OH groups are not only favorable to interact with CO molecules but also function in synergy to decrease the energy barrier of the rate-determining step and maintain a higher charge density of potential active sites as well as inhibit undesired hydrogen evolution reaction. Our results indicate that engineering the interfacial microenvironment through the introduction of CO-philic groups is a promising way to achieve the global optimization of eCO RR via promoting adsorption and activation of CO.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Flexible and Binder-Free Iron Phosphide Electrodes Using a Three-Dimensional Support for High Hydrogen Productivity

  • Díez-García, María Isabel|||0000-0001-9939-8642
  • García Blanco, Andrés Alberto
  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Botifoll, Marc|||0000-0002-4876-6393
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Qamar, Mohammad|||0000-0002-5351-9872
  • Morante, Joan Ramon|||0000-0002-4981-4633
In this work, an inexpensive and reliable microstructured electrode for the hydrogen evolution reaction (HER) is developed. This cathode is made of Earth-abundant elements consisting of iron phosphide as an electrocatalyst and carbon felt (CF) as a flexible conductive scaffold. Its porous character and binder-free FeP coverage over the carbon fibers generate a high number of accessible active sites for the reaction, achieving a high value of the electrochemically active surface area. The electrode reaches 100 mA ⋅ cm by applying only -53 mV vs RHE at 50 °C in 0.5 M HSO, demonstrating excellent electrocatalytic activity for the HER and outstanding stability in acidic electrolyte. Furthermore, the feasibility of these electrodes for industrial application is evaluated using a PEM electrolyzer. The developed prototype with a cathodic area of 1.8 cm shows a very promising performance, reaching 14.9 mmol H ⋅ h ⋅ cm (corresponding to 800 mA ⋅ cm) at a voltage of only 2.1 V.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Improvement of carbon dioxide electroreduction by crystal surface modification of ZIF-8

  • Zhang, Ting|||0000-0002-0317-9662
  • Liu, Hong|||0000-0003-3165-8764
  • Han, Xu|||0000-0001-8319-8830
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Yang, Yunhui|||0000-0002-6007-2335
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Yang, Bo|||0000-0001-6904-6646
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Metal-organic frameworks (MOFs) possess high CO adsorption properties and are considered to be a promising candidate for the electrochemical carbon dioxide reduction reaction (eCORR). However, their insufficient selectivity and current density constrain their further exploration in the eCORR. In this work, by introducing a very small proportion of 2,5-dihydroxyterephthalic acid (DOBDC) into ZIF-8, a surface modified ZIF-8-5% catalyst was synthesized by a post-modification method, exhibiting enhanced selectivity (from 56% to 79%) and current density (from -4 mA cm to -10 mA m) compared to ZIF-8. Density functional theory (DFT) calculations further demonstrate that the boosted eCORR performance on ZIF-8-5% could be attributed to the improved formation of the *COOH intermediate stemming from successful DOBDC surface modification. This work opens a new path for improving the catalytic properties of MOFs via their surface modification.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hydrothermal Fabrication of Carbon-Supported Oxide-Derived Copper Heterostructures, A Robust Catalyst System for Enhanced Electro-Reduction of CO2 to C2H4

  • Tandava, Venkata S.R.K.|||0000-0002-3142-6528
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Morante, Joan Ramon|||0000-0002-4981-4633
Anthropogenic CO can be converted to alternative fuels and value-added products by electrocatalytic routes. Copper-based catalysts are found to be the star materials for obtaining longer-chain carbon compounds beyond 2e products. Herein, we report a facile hydrothermal fabrication of a highly robust electrocatalyst: in-situ grown heterostructures of plate-like CuO-CuO on carbon black. Simultaneous synthesis of copper-carbon catalysts with varied amounts of copper was conducted to determine the optimum blend. It is observed that the optimum ratio and structure have aided in achieving the state of art faradaic efficiency for ethylene >45 % at -1.6 V vs. RHE at industrially relevant high current densities over 160 to 200 mA ⋅ cm. It is understood that the in-situ modification of CuO to CuO during the electrolysis is the driving force for the highly selective conversion of CO to ethylene through the *CO intermediates at the onset potentials followed by C-C coupling. The excellent distribution of Cu-based platelets on the carbon structure enables rapid electron transfer and enhanced catalytic efficiency. It is inferred that choosing the right composition of the catalyst by tuning the catalyst layer over the gas diffusion electrode can substantially affect the product selectivity and promote reaching the potential industrial scale.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A MOF-Based Spatial-Separation Layer to Enable a Uniform Favorable Microenvironment for Electrochemical CO2 Reduction

  • Han, Xu|||0000-0001-8319-8830
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Zhao, Siqi
  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Daasbjerg, Kim|||0000-0003-0212-8190
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Li, Jian
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Regulating the local microenvironment of active sites to increase their specific CO2 concentration and pH gradient, is a promising approach to optimize the electrochemical CO2 reduction reaction (eCO2RR). However, currently reported morphological strategies display an uncertainty to the compatibility and distribution between catalytic sites and their microenvironment. Here, a uniform spatial-separation metal-organic framework (MOF) layer between active sites and bulk electrolyte is proposed, which enables each active site to locate in a similarly favorable microenvironment. Zinc oxide (ZnO) nanorods (NR), a representative electrocatalyst for eCO2RR, is covered with a Zeolitic imidazolate framework-8 (ZIF-8) thin layer to serve as a model system. The prepared ZnO NR@ZIF-8 exhibits an enhanced Faradaic efficiency toward CO at a wide range of potentials and reaches a maximum FE of CO (85%) at -1.05 V versus reversible hydrogen electrode, which is one of the best records till date. Moreover, the hydrophobic ZIF-8 layer protects ZnO against self-reduction. Such performance benefits from the porous ZIF-8 shell with high CO2 affinity, realizing efficient CO2 access and retaining an increased local pH near ZnO active sites.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Direct Operando Visualization of Metal Support Interactions Induced by Hydrogen Spillover During CO2 Hydrogenation

  • Jenkinson, Kellie|||0000-0002-1770-5678
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Golovanova, Viktoria|||0000-0002-4008-0733
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Bals, Sara|||0000-0002-4249-8017
The understanding of catalyst active sites is a fundamental challenge for the future rational design of optimized and bespoke catalysts. For instance, the partial reduction of Ce surface sites to Ce and the formation of oxygen vacancies are critical for CO hydrogenation, CO oxidation, and the water gas shift reaction. Furthermore, metal nanoparticles, the reducible support, and metal support interactions are prone to evolve under reaction conditions; therefore a catalyst structure must be characterized under operando conditions to identify active states and deduce structure-activity relationships. In the present work, temperature-induced morphological and chemical changes in Ni nanoparticle-decorated mesoporous CeO by means of in situ quantitative multimode electron tomography and in situ heating electron energy loss spectroscopy, respectively, are investigated. Moreover, operando electron energy loss spectroscopy is employed using a windowed gas cell and reveals the role of Ni-induced hydrogen spillover on active Ce site formation and enhancement of the overall catalytic performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cobalt-Iron Oxyhydroxide Obtained from the Metal Phosphide, A Highly Effective Electrocatalyst for the Oxygen Evolution Reaction at High Current Densities

  • Díez-García, María Isabel|||0000-0001-9939-8642
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Botifoll, Marc|||0000-0002-4876-6393
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Qamar, Mohammad|||0000-0002-5351-9872
  • Morante, Joan Ramon|||0000-0002-4981-4633
The development of high current density anodes for the oxygen evolution reaction (OER) is fundamental to manufacturing practical and reliable electrochemical cells. In this work, we have developed a bimetallic electrocatalyst based on cobalt-iron oxyhydroxide that shows outstanding performance for water oxidation. Such a catalyst is obtained from cobalt-iron phosphide nanorods that serve as sacrificial structures for the formation of a bimetallic oxyhydroxide through phosphorous loss concomitantly to oxygen/hydroxide incorporation. CoFeP nanorods are synthesized using a scalable method using triphenyl phosphite as a phosphorous precursor. They are deposited without the use of binders on nickel foam to enable fast electron transport, a highly effective surface area, and a high density of active sites. The morphological and chemical transformation of the CoFeP nanoparticles is analyzed and compared with the monometallic cobalt phosphide in alkaline media and under anodic potentials. The resulting bimetallic electrode presents a Tafel slope as low as 42 mV dec and low overpotentials for OER. For the first time, an anion exchange membrane electrolysis device with an integrated CoFeP-based anode was tested at a high current density of 1 A cm, demonstrating excellent stability and Faradaic efficiency near 100%. This work opens up a way for using metal phosphide-based anodes for practical fuel electrosynthesis devices.