Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mesopore-Augmented Electrochemical CO2 Reduction on Nitrogen-Doped Carbon

  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Roldan, Alberto|||0000-0003-0353-9004
  • Ceccato, Marcel|||0000-0002-5510-7951
  • Lock, Nina|||0000-0003-1874-8773
  • Pedersen, Steen Uttrup|||0000-0002-8919-2576
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Daasbjerg, Kim|||0000-0003-0212-8190
The electrochemical carbon dioxide reduction reaction (eCORR) using nitrogen-doped carbon (N-C) materials offers a promising and cost-effective approach to global carbon neutrality. Regulating the porosity of N-C materials can potentially increase the catalytic performance by suppressing the concurrence of the hydrogen evolution reaction (HER). However, the augmentation of porosity usually alters the active sites or the chemical composition of catalysts, resulting in intertwined influences of various structural factors and catalytic performance. In this study, incorporating secondary carbon sources into the metal-organic framework (MOF) precursor through nanocasting aimed to selectively enhance the mesoporous structure, allowing for deciphering this effect from other changes in the catalyst composition. Consequently, the developed N-C catalyst exhibited a significant surface area with abundant mesopores, leading to a maximum Faradaic efficiency (FE) for carbon monoxide (CO) of 95% at -0.50 V versus the reversible hydrogen electrode (vs. RHE). Furthermore, the FE for CO is enhanced across a wide potential range, surpassing previously reported metal-free N-C eCORR catalysts. The investigation reveals that constructing mesoporous structures can induce excellent CO catalysis by enhancing the accessibility of active sites while establishing an elevated local pH at these sites.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electron delocalization engineering via hierarchical modulation in single-atom catalysts for highly efficient electrochemical CO2 reduction

  • Han, Xu|||0000-0001-8319-8830
  • Liu, Hong|||0000-0003-3165-8764
  • Cao, Pengfei
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Zhang, Chao Yue
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Xiao, Ke
  • Tang, PengYi|||0000-0002-2306-095X
  • Heggen, Marc|||0000-0002-2646-0078
  • Vega-Paredes, Miquel|||0000-0001-9916-0167
  • Garzón Manjón, Alba|||0000-0003-2954-1102
  • Zheng, Lirong
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Daasbjerg, Kim|||0000-0003-0212-8190
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Modulating the coordination of atomically dispersed MN moieties to enhance electron asymmetry presents a promising strategy for improving catalytic performance in the electrochemical reduction of carbon dioxide (eCORR). By combining small amounts of Au nanoclusters with lateral oxygen coordination in the first coordination shell, the enhanced electron delocalization on Ni centers improves both activity and selectivity. Experimentally, the optimized catalyst demonstrates exceptional catalytic performance, achieving over 95% Faradaic efficiency (FE) for CO across a broad potential range from - 0.50 to - 0.85 V vs. RHE. It also achieves over 90% FE for CO at an overpotential of 340 mV, outperforming state-of-the-art Ni-based single-atom catalysts (SACs). Moreover, the catalyst shows promising potential at a higher current density (∼150 mA cm) in a flow cell, maintaining high CO selectivity (over 90%). Structural characterizations and theoretical calculations indicate that this structure enhances electron redistribution around Ni sites through a unique electron tug effect. This effectively stabilizes *COOH intermediates, favoring CO production during eCORR at low applied potentials. This work offers a valuable method that extends beyond the first coordination shell, augmenting the complexity of electronic distribution on metal centers, which could be adapted for further fine-tuning the catalytic behavior of SACs in various reactions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron delocalization engineering via hierarchical modulation in single-atom catalysts for highly efficient electrochemical CO2 reduction

  • Han, Xu
  • Liu, Hong
  • Cao, Pengfei
  • Tang, Weiqiang
  • Zhang, Chao Yue
  • Biset-Peiró, Martí
  • Xiao, Ke
  • Tang, Peng-Yi
  • Heggen, Marc
  • Vega-Paredes, Miquel
  • Garzón Manjón, Alba
  • Zheng, Lirong
  • Dunin-Borkowski, Rafal E.
  • Cabot, Andreu
  • Daasbjerg, Kim
  • Morante, Joan Ramón
  • Zhang, Ting
  • Arbiol, Jordi
Modulating the coordination of atomically dispersed MN4 moieties to enhance electron asymmetry presents a promising strategy for improving catalytic performance in the electrochemical reduction of carbon dioxide (eCO2RR). By combining small amounts of Au nanoclusters with lateral oxygen coordination in the first coordination shell, the enhanced electron delocalization on Ni centers improves both activity and selectivity. Experimentally, the optimized catalyst demonstrates exceptional catalytic performance, achieving over 95% Faradaic efficiency (FE) for CO across a broad potential range from − 0.50 to − 0.85 V vs. RHE. It also achieves over 90% FE for CO at an overpotential of 340 mV, outperforming state-of-the-art Ni-based single-atom catalysts (SACs). Moreover, the catalyst shows promising potential at a higher current density (∼150 mA cm−2) in a flow cell, maintaining high CO selectivity (over 90%). Structural characterizations and theoretical calculations indicate that this structure enhances electron redistribution around Ni sites through a unique electron tug effect. This effectively stabilizes *COOH intermediates, favoring CO production during eCO2RR at low applied potentials. This work offers a valuable method that extends beyond the first coordination shell, augmenting the complexity of electronic distribution on metal centers, which could be adapted for further fine-tuning the catalytic behavior of SACs in various reactions., The authors thank Guillaume Sauthier, Javier Saiz for the XPS spectrum and FTIR tests at ICN2. ICN2 and IREC acknowledge funding from Generalitat de Catalunya projects 2021SGR00457 and 2021SGR01581, respectively. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). ICN2 and IREC are funded by the CERCA Programme / Generalitat de Catalunya. ICN2 is the founding member of e-DREAM (https://doi.org/10.1017/S1431927622010893). X.H. and T.Z. acknowledge support from Marie Skłodowska-Curie grant agreement number 101146498 and 101105092. W. T. acknowledges for the financial support from the National Natural Science Foundation of China (Grant No. 22108070) and the Young Elite Scientists Sponsorship Program by CAST (No. 2022QNRC001). KD acknowledges support from the Novo Nordisk Foundation CO2 Research Center (Grant no. NNF21SA0072700); this work is published under the number CORC_25_47., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mesopore-augmented electrochemical CO2 reduction on nitrogen-doped carbon

  • Han, Xu
  • Zhang, Ting
  • Biset-Peiró, Martí
  • Roldan, Alberto
  • Ceccato, Marcel
  • Lock, Nina
  • Pedersen, Steen Uttrup
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Daasbjerg, Kim
The electrochemical carbon dioxide reduction reaction (eCO2RR) using nitrogen-doped carbon (N-C) materials offers a promising and cost-effective approach to global carbon neutrality. Regulating the porosity of N-C materials can potentially increase the catalytic performance by suppressing the concurrence of the hydrogen evolution reaction (HER). However, the augmentation of porosity usually alters the active sites or the chemical composition of catalysts, resulting in intertwined influences of various structural factors and catalytic performance. In this study, incorporating secondary carbon sources into the metal-organic framework (MOF) precursor through nanocasting aimed to selectively enhance the mesoporous structure, allowing for deciphering this effect from other changes in the catalyst composition. Consequently, the developed N-C catalyst exhibited a significant surface area with abundant mesopores, leading to a maximum Faradaic efficiency (FE) for carbon monoxide (CO) of 95% at -0.50 V versus the reversible hydrogen electrode (vs. RHE). Furthermore, the FE for CO is enhanced across a wide potential range, surpassing previously reported metal-free N-C eCO2RR catalysts. The investigation reveals that constructing mesoporous structures can induce excellent CO2 catalysis by enhancing the accessibility of active sites while establishing an elevated local pH at these sites., Part of this work was supported by the Novo Nordisk Foundation CO2 Research Center (CORC) with grant number NNF21SA0072700 and is published under the number CORC_24_19. X.H. and T.Z. acknowledge support from Marie Skłodowska-Curie grant agreement numbers 101146498 and 101105092. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors thank the support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunyan (In-CAEM Project). ICN2 is founding member of e-DREAM(https://doi.org/10.1017/S1431927622010893). . IREC thanks the support from PID2020-116093RB-C42/AEI/ and 2021SGR001581 The authors thank Guillaume Sauthier and Javier Saiz for the XPS spectrum and FTIR tests. The authors acknowledge supercomputing Wales for access to the Hawk HPC facility, which the European Regional Development Fund partly funded via the Welsh Government. All computational data created during this research are available from the University of Cardiff Research Portal orca websites http://doi.org/10.17035/d.2024.0325942021., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed