Pasar al contenido principal

METODOS DE CARACTERIZACION BASADOS EN MICROSCOPIA ELECTRONICA AVANZADA PARA MATERIALES Y DISPOSITIVOS PARA LA ENERGIA

PID2023-149158OB-C43

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 64
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Anionic Doping in Layered Transition Metal Chalcogenides for Robust Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chao Yue
  • Cui, Zhibiao
  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Canhuang
  • Qi, Xuede|||0009-0008-5723-3629
  • Li, Junshan|||0000-0002-1482-1972
  • Yuan Zhou, Jin
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Simonelli, Laura|||0000-0001-5331-0633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Lei, Yao-Jie
  • Sun, Qing|||0000-0002-9145-7772
  • Wang, Guoxiu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) are among the most promising next-generation energy storage technologies. However, a slow Li-S reaction kinetics at the LSB cathode limit their energy and power densities. To address these challenges, this study introduces an anionic-doped transition metal chalcogenide as an effective catalyst to accelerate the Li-S reaction. Specifically, a tellurium-doped, carbon-supported bismuth selenide with Se vacancies (Te-Bi2Se3-x@C) is prepared and tested as a sulfur host in LSB cathodes. X-ray absorption and in situ X-ray diffraction analyses reveal that Te doping induces lattice distortions and modulates the local coordination environment and electronic structure of Bi atoms to promote the catalytic activity toward the conversion of polysulfides. Additionally, the generated Se vacancies alter the electronic structure around atomic defect sites, increase the carrier concentration, and activate unpaired cations to effectively trap polysulfides. As a result, LSBs based on Te-Bi2Se3-x@C/S cathodes demonstrate outstanding specific capacities of 1508 mAh ⋅ g-1 at 0.1 C, excellent rate performance with 655 mAh ⋅ g-1 at 5 C, and near-integral cycle stability over 1000 cycles. Furthermore, under high sulfur loading of 6.4 mg ⋅ cm-2, a cathode capacity exceeding 8 mAh ⋅ cm-2 is sustained at 0.1 C current rate, with 6.4 mAh ⋅ cm-2 retained after 300 cycles under lean electrolyte conditions (6.8 μL ⋅ mg-1).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced lithium polysulfide adsorption and reaction with cobalt-doped spinel additives for robust lithium-sulfur batteries

  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Qi, Xuede|||0009-0008-5723-3629
  • Zhang, Xuesong|||0000-0001-6685-3602
  • Berlanga-Vázquez, Armando|||0009-0003-4114-1491
  • Chang, Xingqi|||0000-0002-2604-0233
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Guardia, Pablo|||0000-0001-9076-4642
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Zhang, Chao Yue
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur-based cathodes offer a promising high-energy-density alternative to conventional lithium-ion batteries. However, their commercial viability is hindered by limited stability due to the gradual loss of active sulfur during cycling. This study addresses this challenge by introducing a cobalt-doped spinel oxide as a catalytic additive, designed to enhance the performance and stability of sulfur cathodes with minimized cobalt usage. Small amounts of cobalt doping improve the adsorption of sulfur species through stronger electronic interactions with antibonding orbitals and accelerate charge transfer, thereby promoting more efficient sulfur redox reactions. Cobalt also lowers the energy barrier for LiS formation, a critical step in the cycling process. Specifically, Co-doped MnFeO with 2.4 wt % Co demonstrates a remarkable initial capacity of 1302 mAh/g at 0.1C, excellent rate capability with 700 mAh/g at 4C, and stable cycling performance with an average capacity decay of just 0.03 % per cycle at 0.5C over 200 cycles. Overall, this work underscores the potential of cobalt-doped spinel structures as catalytic additives to mitigate the limitations of sulfur cathodes, paving the way for more stable and high-performance lithium-sulfur batteries.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing|||0000-0002-7620-745X
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto-Huguet, Ivan
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Lu, Xuan|||0000-0003-2453-2805
  • Gupta, Kapil|||0000-0002-4826-6620
  • Botifoll, Marc|||0000-0002-4876-6393
  • Simonelli, Laura|||0000-0001-5331-0633
  • Fauth, François|||0000-0001-9465-3106
  • Zhou, Jin Yuan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Lu, Yan|||0000-0003-3055-0073
  • Zhang, Chao Yue
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly LiS nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid LiS nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Boosting Polysulfide Conversion on Fe-Doped Nickel Diselenide Toward Robust Lithium-Sulfur Batteries

  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Yong
  • Li, Canhuang
  • Ma, Yi
  • Ge, Huan
  • Jian, Ning
  • Li, Luming
  • Zhang, Chao Yue
  • Zhou, Jin Yuan
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur offers a high-energy-density, low-cost, and sustainable alternative to traditional battery cathodes, but its practical use is limited by sluggish and uneven reaction and polysulfide dissolution, necessitating electrocatalytic additives to enhance conversion efficiency. Generating unpaired spin electrons has proven effective in enhancing performance in Co-based electrocatalysts. These unpaired electrons increase polysulfide conversion by enhancing adsorption and weakening S─S bonds, facilitating their cleavage during sulfur reduction reactions. This work extends the strategy to Fe-Ni-based catalysts. The synthesis of NiSe and Fe-doped NiSe particles is reported and investigate the impact of Fe doping on the electronic structure, catalytic activity, and performance of NiSe is introduced as a coating on the cathode side of the Li-S battery (LSB) separator. Experimental analyses and first-principles calculations reveal that Fe-rich cores and surface doping in NiSe enhance the density of states at the Fermi level and introduce unpaired electrons, boosting LiPS adsorption and catalytic conversion. These synergistic effects significantly improve the catalytic performance, cycling stability, and overall performance of LSB cells. Specifically, LSB cells based on Fe-doped NiSe-based separators achieve specific capacities of 1483 mAh g⁻¹ at 0.1C and 1085 mAh g⁻¹ at 1C, along with remarkable cycling stability, retaining 84.4% capacity after 800 cycles. High sulfur-loading tests further validate the multifunctional membrane's effectiveness, showing significant capacity retention and reduced polysulfide loss.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Mechanistic Insights and Technical Challenges in Sulfur-Based Batteries, A Comprehensive In Situ/Operando Monitoring Toolbox

  • Yu, Jing|||0000-0002-7620-745X
  • Pinto-Huguet, Ivan
  • Zhang, Chao Yue
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Xu, Yaolin|||0000-0002-2658-3852
  • Vizintin, Alen|||0000-0003-1876-1396
  • Velasco-Vélez, Juan-Jesús|||0000-0002-6595-0168
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Pan, Xiaobo|||0000-0002-5757-2339
  • Oney, Gozde
  • Olgo, Annabel
  • Märker, Katharina|||0000-0002-5056-7174
  • M. Da Silva, Leonardo
  • Luo, Yufeng
  • Lu, Yan|||0000-0003-3055-0073
  • Huang, Chen
  • Härk, Eneli|||0000-0001-5758-8106
  • Fleming, Joe
  • Chenevier, Pascale|||0000-0003-4358-2162
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Bai, Yunfei
  • Botifoll, Marc|||0000-0002-4876-6393
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • An, Qi
  • Amietszajew, Tazdin|||0000-0001-7452-1034
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Batteries based on sulfur cathodes offer a promising energy storage solution due to their potential for high performance, cost-effectiveness, and sustainability. However, commercial viability is challenged by issues such as polysulfide migration, volume changes, uneven phase nucleation, limited ion transport, and sluggish sulfur redox kinetics. Addressing these challenges requires insights into the structural, morphological, and chemical evolution of phases, the associated volume changes and internal stresses, and ion and polysulfide diffusion within the battery. Such insights can only be obtained through real-time reaction monitoring within the battery's operational environment, supported by molecular dynamics simulations and advanced artificial intelligence-driven data analysis. This review provides an overview of in situ/operando techniques for real-time tracking of these processes in sulfur-based batteries and explores the integration of simulations with experimental data to provide a holistic understanding of the critical challenges, enabling advancements in their development and commercial adoption.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Spin-modulated catalysis in sulfur cathodes for improved performance in lithium-sulfur batteries

  • Zhang, Chao Yue
  • Yu, Jing|||0000-0002-7620-745X
  • Huang, Chen
  • Cabello, Gema
  • Qi, Xuede|||0009-0008-5723-3629
  • Sun, Guo Wen
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • He, Ren|||0000-0003-3712-5539
  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Canhuang
  • Li, Junshan|||0000-0002-1482-1972
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Rubio Garcia, Javier
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Jin Yuan
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The rapid growth of electric vehicles and the increasing integration of renewable energy into the grid have heightened the demand for high-capacity energy storage systems based on abundant, low-cost materials. To address the limitations of conventional ion-intercalation batteries, conversion-type electrodes have gained significant attention, as their energy storage relies on chemical redox reactions often requiring activation or acceleration via electrocatalysis. Recent studies reveal that electrocatalytic activity is governed not only by active-site density and charge-carrier availability, but also by the spin states of electrons within the catalyst. Consequently, understanding the role of electronic spin states in battery performance, and how to manipulate them to enhance energy storage, has become a critical research frontier. This review provides a comprehensive overview of current strategies to modulate spin states in electrocatalysts for conversion-type cathodes. While external magnetic fields remain the primary method to probe and control electron spin, more practical and scalable approaches, such as atomic coordination engineering and surface spin filters, are emerging. Particular focus is given to sulfur cathodes, which offer exceptional theoretical energy density and capacity but depend heavily on catalytic hosts to enable efficient sulfur redox reactions. The review also surveys experimental techniques for probing spin states and theoretical approaches for modeling spin-related phenomena at the atomic scale. Finally, it highlights emerging research directions, underscoring the potential of spin-state modulation as a transformative strategy for next-generation energy storage technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ligand-Mediated Tailoring of Self-Supported MnxOy@Ni(OH)2Nanoheterostructures with Enhanced OER Performance

  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Zhang, Xuesong|||0000-0001-6685-3602
  • Lu, Xuan|||0000-0003-2453-2805
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Xue, Qian
  • Berlanga-Vázquez, Armando|||0009-0003-4114-1491
  • Llorca, Jordi|||0000-0002-7447-9582
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Guardia, Pablo|||0000-0001-9076-4642
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We report a colloidal synthesis strategy for producing MnO@Ni(OH)nanoheterostructures under mild conditions, i.e., low temperature and ambient pressure. The role of carboxylic acid ligands in directing the synthesis is systematically explored, revealing that lower ligand concentrations along with low-molecular weight molecules favor the formation of well-defined MnO@Ni(OH)heterostructures. Electrochemical characterization demonstrates that the resulting nanocomposites exhibit significantly enhanced electrochemical surface area and oxygen evolution reaction (OER) activity compared to their single-component counterparts. Specifically, MnO@Ni(OH)achieves a low overpotential of 299 mV at 10 mA cm, a Tafel slope of 61 mV dec, and a low charge transfer resistance of 9 Ω. The improved OER performance is attributed to the synergistic effect between the Ni(OH)nanosheets, which facilitate *OOH intermediate formation, and the MnOcomponent, known for its intrinsic catalytic activity. Additionally, MnOserves as a stabilizing phase and precursor to MnO, contributing to the overall durability and structural integrity of the catalyst.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ca2+-Preintercalated V2O5as a Dual-Function Cathode Additive for Polyiodide Anchoring in Zn-I2Batteries

  • Bi, Xiaoyu
  • Yu, Ao
  • Zhang, Jing
  • Yu, Jing|||0000-0002-7620-745X
  • Li, Canhuang
  • Ren, Yuchuan|||0000-0002-6870-4149
  • Lin, Kaifu|||0009-0002-3670-773X
  • Chai, Jiali
  • Xue, Qian
  • Xie, Yanting
  • Cheng, Yapeng|||0000-0002-9218-9095
  • Chang, Xingqi|||0000-0002-2604-0233
  • Lu, Xuan|||0000-0003-2453-2805
  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Zeng, Guifang|||0000-0002-5927-4730
  • Huang, Chen
  • Qi, Xuede|||0009-0008-5723-3629
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Jacob, Timo|||0000-0001-7777-2306
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Aqueous zinc-iodine (Zn-I) batteries have attracted considerable attention due to their abundant resources, high safety, and environmental friendliness. However, challenges inherent to conversion-type electrodes, including severe active material shuttling and suboptimal Coulombic efficiency, continue to limit their performance. Here, we present a high-performance Zn-Ibattery enabled by calcium-ion-preintercalated VO(CaVO) nanobelts as a cathode additive. By harnessing the synergistic effects of physical trapping (via activated carbon and interlayer confinement in CaVO) and chemical adsorption (through Cabinding sites), the hybrid host framework achieves superior immobilization of iodine species while simultaneously shortening Zndiffusion pathways, thereby facilitating efficient I/Iredox kinetics. Furthermore, Ca-induced crystal structure modification enhances the Zntransport and provides additional capacity contributions. As a result, Zn-Icells employing I-loaded CaVO (CaVO/AC@I) composite cathodes deliver a high specific capacity of 244 mAh gat 0.2 A g, outstanding rate performance with 78.5% capacity retention at 5 A g, and an impressive energy density of 279 Wh kg, based on the combined mass of Iand CaVO. This work presents a hybrid energy storage strategy for Zn-Isystems, providing a feasible approach for the development of next-generation high-performance aqueous batteries.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electron delocalization engineering via hierarchical modulation in single-atom catalysts for highly efficient electrochemical CO2 reduction

  • Han, Xu|||0000-0001-8319-8830
  • Liu, Hong|||0000-0003-3165-8764
  • Cao, Pengfei
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Zhang, Chao Yue
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Xiao, Ke
  • Tang, PengYi|||0000-0002-2306-095X
  • Heggen, Marc|||0000-0002-2646-0078
  • Vega-Paredes, Miquel|||0000-0001-9916-0167
  • Garzón Manjón, Alba|||0000-0003-2954-1102
  • Zheng, Lirong
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Daasbjerg, Kim|||0000-0003-0212-8190
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Modulating the coordination of atomically dispersed MN moieties to enhance electron asymmetry presents a promising strategy for improving catalytic performance in the electrochemical reduction of carbon dioxide (eCORR). By combining small amounts of Au nanoclusters with lateral oxygen coordination in the first coordination shell, the enhanced electron delocalization on Ni centers improves both activity and selectivity. Experimentally, the optimized catalyst demonstrates exceptional catalytic performance, achieving over 95% Faradaic efficiency (FE) for CO across a broad potential range from - 0.50 to - 0.85 V vs. RHE. It also achieves over 90% FE for CO at an overpotential of 340 mV, outperforming state-of-the-art Ni-based single-atom catalysts (SACs). Moreover, the catalyst shows promising potential at a higher current density (∼150 mA cm) in a flow cell, maintaining high CO selectivity (over 90%). Structural characterizations and theoretical calculations indicate that this structure enhances electron redistribution around Ni sites through a unique electron tug effect. This effectively stabilizes *COOH intermediates, favoring CO production during eCORR at low applied potentials. This work offers a valuable method that extends beyond the first coordination shell, augmenting the complexity of electronic distribution on metal centers, which could be adapted for further fine-tuning the catalytic behavior of SACs in various reactions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic Insights and Technical Challenges in Sulfur-Based Batteries: A Comprehensive In Situ/Operando Monitoring Toolbox

  • Yu, Jing
  • Pinto, Iván
  • Zhang, Chao Yue
  • Zhou, Yingtang
  • Xu, Yaolin
  • Vizintin, Alen
  • Velasco-Vélez, Juan-Jesús
  • Qi, Xueqiang
  • Pan, Xiaobo
  • Oney, Gozde
  • Olgo, Annabel
  • Märker, Katharina
  • Silva, Leonardo M. da
  • Luo, Yufeng
  • Lu, Yan
  • Huang, Chen
  • Härk, Eneli
  • Fleming, Joe
  • Chenevier, Pascale
  • Cabot, Andreu
  • Bai, Yunfei
  • Botifoll, Marc
  • Black, Ashley P.
  • An, Qi
  • Amietszajew, Tazdin
  • Arbiol, Jordi
Batteries based on sulfur cathodes offer a promising energy storage solution due to their potential for high performance, cost-effectiveness, and sustainability. However, commercial viability is challenged by issues such as polysulfide migration, volume changes, uneven phase nucleation, limited ion transport, and sluggish sulfur redox kinetics. Addressing these challenges requires insights into the structural, morphological, and chemical evolution of phases, the associated volume changes and internal stresses, and ion and polysulfide diffusion within the battery. Such insights can only be obtained through real-time reaction monitoring within the battery's operational environment, supported by molecular dynamics simulations and advanced artificial intelligence-driven data analysis. This review provides an overview of in situ/operando techniques for real-time tracking of these processes in sulfur-based batteries and explores the integration of simulations with experimental data to provide a holistic understanding of the critical challenges, enabling advancements in their development and commercial adoption., ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. ICN2 is founding member of e-DREAM. J.Y. and C.H. thank the China Scholarship Council for the financial support. A.V. thanks financial support from the Slovenian Research and Innovation Agency (ARIS) under research core program P2-0423. J.Y. and A.C. acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, the Generalitat de Catalunya 2021SGR01581 and European Union NextGenerationEU/PRTR. P.C. acknowledges support from the 2BoSS project of the ERA-MIN3 program with the French grant number ANR-22-MIN3-0003-01 from Agence Nationale de la Recherche. C.Y.Z. acknowledge the support by the Supercomputing Center of Lanzhou University, China. We acknowledge financial support from the European Union (Grant agreement No. 101104006 ─ HEALING BAT ─ HORIZON-CL5-2022-D2-01)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anionic Doping in Layered Transition Metal Chalcogenides for Robust Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing
  • Yue Zhang, Chao
  • Cui, Zhibiao
  • He, Ren
  • Yang, Linlin
  • Nan, Bingfei
  • Li, Canhuang
  • Qi, Xuede
  • Qi, Xueqiang
  • Li, Junshan
  • Yuan Zhou, Jin
  • Usoltsev, Oleg
  • Simonelli, Laura
  • Arbiol, Jordi
  • Lei, Yao-Jie
  • Sun, Qing
  • Wang, Guoxiu
  • Cabot, Andreu
Lithium-sulfur batteries (LSBs) are among the most promising next-generation energy storage technologies. However, a slow Li-S reaction kinetics at the LSB cathode limit their energy and power densities. To address these challenges, this study introduces an anionic-doped transition metal chalcogenide as an effective catalyst to accelerate the Li-S reaction. Specifically, a tellurium-doped, carbon-supported bismuth selenide with Se vacancies (Te-Bi2Se3-x@C) is prepared and tested as a sulfur host in LSB cathodes. X-ray absorption and in situ X-ray diffraction analyses reveal that Te doping induces lattice distortions and modulates the local coordination environment and electronic structure of Bi atoms to promote the catalytic activity toward the conversion of polysulfides. Additionally, the generated Se vacancies alter the electronic structure around atomic defect sites, increase the carrier concentration, and activate unpaired cations to effectively trap polysulfides. As a result, LSBs based on Te-Bi2Se3-x@C/S cathodes demonstrate outstanding specific capacities of 1508 mAh ⋅ g-1 at 0.1 C, excellent rate performance with 655 mAh ⋅ g-1 at 5 C, and near-integral cycle stability over 1000 cycles. Furthermore, under high sulfur loading of 6.4 mg ⋅ cm-2, a cathode capacity exceeding 8 mAh ⋅ cm-2 is sustained at 0.1 C current rate, with 6.4 mAh ⋅ cm-2 retained after 300 cycles under lean electrolyte conditions (6.8 μL ⋅ mg-1)., This work was financially supported by the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 and European Union Next Generation EU/PRTR. C. H., J. Y. thank the China Scholarship Council for the scholarship support. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union”. XAS experiments were performed at CLAESS beamline of ALBA Synchrotron with the collaboration of ALBA staff. J. Li is grateful for the project supported by the Natural Science Foundation of Sichuan (2022NSFSC1229). The authors acknowledge the support of the Supercomputing Center of Lanzhou University, China. This work has received funding from the “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00). This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.51, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron delocalization engineering via hierarchical modulation in single-atom catalysts for highly efficient electrochemical CO2 reduction

  • Han, Xu
  • Liu, Hong
  • Cao, Pengfei
  • Tang, Weiqiang
  • Zhang, Chao Yue
  • Biset-Peiró, Martí
  • Xiao, Ke
  • Tang, Peng-Yi
  • Heggen, Marc
  • Vega-Paredes, Miquel
  • Garzón Manjón, Alba
  • Zheng, Lirong
  • Dunin-Borkowski, Rafal E.
  • Cabot, Andreu
  • Daasbjerg, Kim
  • Morante, Joan Ramón
  • Zhang, Ting
  • Arbiol, Jordi
Modulating the coordination of atomically dispersed MN4 moieties to enhance electron asymmetry presents a promising strategy for improving catalytic performance in the electrochemical reduction of carbon dioxide (eCO2RR). By combining small amounts of Au nanoclusters with lateral oxygen coordination in the first coordination shell, the enhanced electron delocalization on Ni centers improves both activity and selectivity. Experimentally, the optimized catalyst demonstrates exceptional catalytic performance, achieving over 95% Faradaic efficiency (FE) for CO across a broad potential range from − 0.50 to − 0.85 V vs. RHE. It also achieves over 90% FE for CO at an overpotential of 340 mV, outperforming state-of-the-art Ni-based single-atom catalysts (SACs). Moreover, the catalyst shows promising potential at a higher current density (∼150 mA cm−2) in a flow cell, maintaining high CO selectivity (over 90%). Structural characterizations and theoretical calculations indicate that this structure enhances electron redistribution around Ni sites through a unique electron tug effect. This effectively stabilizes *COOH intermediates, favoring CO production during eCO2RR at low applied potentials. This work offers a valuable method that extends beyond the first coordination shell, augmenting the complexity of electronic distribution on metal centers, which could be adapted for further fine-tuning the catalytic behavior of SACs in various reactions., The authors thank Guillaume Sauthier, Javier Saiz for the XPS spectrum and FTIR tests at ICN2. ICN2 and IREC acknowledge funding from Generalitat de Catalunya projects 2021SGR00457 and 2021SGR01581, respectively. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). ICN2 and IREC are funded by the CERCA Programme / Generalitat de Catalunya. ICN2 is the founding member of e-DREAM (https://doi.org/10.1017/S1431927622010893). X.H. and T.Z. acknowledge support from Marie Skłodowska-Curie grant agreement number 101146498 and 101105092. W. T. acknowledges for the financial support from the National Natural Science Foundation of China (Grant No. 22108070) and the Young Elite Scientists Sponsorship Program by CAST (No. 2022QNRC001). KD acknowledges support from the Novo Nordisk Foundation CO2 Research Center (Grant no. NNF21SA0072700); this work is published under the number CORC_25_47., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generation of unpaired electrons to promote electron transfer at the cathode of room-temperature sodium sulfur batteries

  • Huang, Chen
  • Yu, Jing
  • Lei, Yao-Jie
  • Usoltsev, Oleg
  • Gong, Li
  • Cui, Zhibiao
  • Li, Junshan
  • Li, Canhuang
  • Nan, Bingfei
  • Lu, Xuan
  • He, Ren
  • Qi, Xuede
  • Xue, Qian
  • Chai, Jiali
  • Ren, Yuchuan
  • Bi, Xiaoyu
  • Cheng, Yapeng
  • Zhou, Jin Yuan
  • Skorynina, Alina
  • Bugaev, Aram
  • Martínez-Alanis, Paulina R.
  • Balcells, Lluis
  • Arbiol, Jordi
  • Zhang, Chao Yue
  • Cabot, Andreu
Room-temperature sodium-sulfur batteries offer significant potential for energy storage, but they are hindered by slow Na-S reaction kinetics. While trial and error screening shows cobalt-based sulfur hosts to effectively activate this reaction, this study aims to enable a more rational catalyst design by exploring how cobalt's electronic configuration within the cathode composite affects its activity and how this configuration can be adjusted through charge injection from neighboring atoms. Cobalt oxide nanoparticles coated with carbon nitride serve as a model system for this purpose, where N atoms in C3N4 donate electrons to Co, generating additional unpaired Co 3d electrons, that are then transferred to sodium polysulfides with a reduced kinetic barrier. Experimental and theoretical analyses reveal that this activated electronic state boosts charge transfer, while the adjusted d-band center improves adsorption energy, lowering the reaction energy barrier for the polysulfide conversion rate-determining step., This work was financially supported by the SyDECat and AMaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 and PID2023-149158OB-C43, respectively), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985 /AEI /10.13039 /501100011033, Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 and Next Generation EU / PRTR-C17.I1. C. H., J. Y., C.Y. Z., and B. F. N thank the China Scholarship Council for the scholarship support. ICN2 acknowledges the support from the Severo Ochoa Program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. J. Li is grateful for the project supported by the Natural Science Foundation of Sichuan (2022NSFSC1229). The authors also greatly acknowledge the support supported by the Supercomputing Center of Lanzhou University, China. This work has received funding from the “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S) and “OXISOT” (PID2021-128410OB-I00). This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, General it at de Catalunya. ICN2 is a founding member of e-DREAM[65]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000917-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal Doping Activation of Anion-Mediated Electron Transfer in Catalytic Reactions

  • Zhang, Chao Yue
  • Yu, Jing
  • Huang, Chen
  • Sun, Guowen
  • Balcells, Lluis
  • Li, Jiayue
  • Qi, Xuede
  • Yi, Cheng Zhu
  • Herrero Martín, Javier
  • Simonelli, Laura
  • Fauth, François
  • He, Ren
  • Pan, Xiaobo
  • Li, Junshan
  • Arbiol, Jordi
  • Zhou, Jin Yuan
  • Cabot, Andreu
Heteroatom-doping has emerged as a transformative approach to producing high-performance catalysts, yet the current trial-and-error approach to optimize these materials remains ineffective. To enable the rational design of more efficient catalysts, models grounded in a deeper understanding of catalytic mechanisms are essential. Existing models, such as d-band center theory, fall short in explaining the role of dopants, particularly when these dopants do not directly interact with reactants. In this study, we synthesize various heteroatom-doped catalysts to explore the correlation between the electronic effects of the dopants and catalyst activity. Using Co-MoS2 as a model catalyst and the Li-S redox reaction within the cathode of Li-S batteries as a test system, we show the interaction between cobalt sites and adjacent lattice sulfur atoms disrupts the intrinsic structural and electronic symmetry of MoS2. This disruption enhances the transfer of spin-polarized electrons from metal centers to lattice sulfur and promotes the adsorption of reactant intermediates. Furthermore, by analyzing 20 different dopant elements, we establish a linear relationship between the electron density in the lattice sulfur and catalyst activity toward the reduction of sulfur species, a relationship that extends to other catalytic systems, such as the hydrogen evolution reaction., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457 and European Union Next Generation EU/PRTR. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. Authors acknowledge the use of funding from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S) and “OXISOT” (PID2021-128410OB-I00). J.L. is grateful for the Natural Science Foundation of Sichuan project (2025ZNSFSC0139)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid electron transfer in Co0.85Se-MoSe2/NCP heterostructure catalyst towards robust lithium-sulfur batteries

  • Qi, Xuede
  • Zhang, Chao Yue
  • Yu, Jing
  • Huang, Chen
  • Yu, Ao
  • Xue, Qian
  • Li, Canhuang
  • Li, Kun
  • Lu, Xuan
  • Ren, Yuchuan
  • Bi, Xiaoyu
  • Zhang, Chaoqi
  • Li, Junshan
  • Zhou, Jin Yuan
  • Arbiol, Jordi
  • Qi, Xueqiang
  • Cabot, Andreu
Lithium-sulfur batteries (LSBs) are a promising candidate for next-generation energy storage solutions. However, challenges such as the shuttling effect and sluggish Li-S reaction kinetics of lithium polysulfides hinder their practical application. In this work, we present a mixed-phase heterostructure comprising Co0.85Se and MoSe2, supported on nitrogen-doped carbon polyhedrons (NCP), as an effective sulfur host in the LSB cathode. Through a combination of theoretical calculations and experimental validation, we demonstrate that the Co0.85Se-MoSe2 heterointerface significantly enhances electron transfer efficiency, thereby boosting the overall reaction kinetics of the sulfur cathode. As a result, the Co0.85Se-MoSe2/NCP/S electrodes exhibit initial specific capacities exceeding 1500 mAh g−1 at 0.1 C and retain 666 mAh g−1 at 3 C, with a capacity fade rate of 0.044% per cycle over 500 cycles at 1.0 C. Notably, even at a high sulfur loading of 3 mg cm−2 and a reduced electrolyte volume of 6.7 μL mgS−1, the Co0.85Se-MoSe2/NCP/S electrodes maintain a capacity of 432 mAh g−1 after 100 cycles at 0.2 C., The authors acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033. The authors acknowledge funding from the Generalitat de Catalunya 2021SGR01581 and 2021SGR00457, the European Union NextGenerationEU/PRTR, the Natural Science Foundation of Chongqing (No. 2023NSCQ-MSX1669) and the Science and Technology Research Program of Chongqing Municipal Education Commission (No. KJZD-K202401110). The authors acknowledge the support of the Supercomputing Center of Lanzhou University, China. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM [46]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glucose electrooxidation with simultaneous H2 production on nickel-zinc electrocatalysts derived from an ethylenediamine-functionalized zeolitic imidazole framework

  • Mejia-Centeno, Karol V.
  • Montaña-Mora, Guillem
  • Chacón-Borrero, Jesús
  • Xue, Qian
  • Gong, Li
  • Martí-Sànchez, Sara
  • Berlanga, Armando
  • Llorca, Jordi
  • Ibáñez, María
  • Arbiol, Jordi
  • Qi, Xueqiang
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The oxidation of biomass-derived compounds such as glucose within electrochemical cells enables both the energy-efficient production of hydrogen and the generation of additional added-value chemicals from biomass. However, for this biomass valorization approach to become commercially viable, selective, cost-effective, and highly active electrooxidation catalysts need to be developed. In this work, we detail the synthesis of a nickel (Ni) and zinc (Zn)-based electrocatalyst for the glucose oxidation reaction (GOR) to formic acid (FoA) via calcination of a Zn-based zeolitic imidazole framework (ZIF) functionalized with ethylenediamine and doped with Ni. The structure, morphology, and electrochemical performance of the catalysts towards the anodic GOR to FoA coupled with the cathodic hydrogen evolution reaction (HER) are subsequently studied. Chronopotentiometry tests with 0.1 M of glucose show a conversion of 94 % at 250 mA in only 70 min, with a Faradaic efficiency (FE) of 91 % toward the production of FoA. Meanwhile, at the cathode, the HER FE is close to 98 %., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 & PID2023-149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and European Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of Science, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023-042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 is founding member of e-DREAM. [76] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and to projects PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and to the GC 2021 SGR 01061 grant., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective Electrooxidation of Ethylene Glycol to Formate with Hydrogen Cogeneration in Ni3S2 Nanodomains on NiFeMn-LDH Nanosheet Arrays

  • Ma, Yi
  • Ge, Huan
  • Zhang, Yong
  • Jian, Ning
  • Yu, Jing
  • Arbiol, Jordi
  • Li, Canhuang
  • Zhong, Yue
  • Li, Luming
  • Kang, Hui
  • Wang, Jun
  • Cabot, Andreu
  • Li, Junshan
The electrocatalytic oxidation of small organic molecules, such as ethylene glycol (EG), can be paired with the hydrogen evolution reaction (HER) to effectively lower the overall cell voltage, thereby enhancing energy efficiency for hydrogen production. Moreover, the anodic EG oxidation reaction (EGOR) can generate valuable C1 and C2 compounds, offering a sustainable approach to greener chemical production. The industrial viability of this process requires nonprecious metal electrocatalysts that demonstrate high performance at low potential and exhibit high selectivity. In this study, we report on a cost-effective electrocatalyst based on a nickel sulfide phase (Ni<inf>3</inf>S<inf>2</inf>) heterogeneously nucleated on the surface of nickel-iron-manganese layered double hydroxide (NiFeMn-LDH) nanosheet arrays and supported on nickel foam (NF), demonstrating exceptional activity for the coupled HER and EGOR in alkaline conditions. This Ni<inf>3</inf>S<inf>2</inf>@NiFeMn-LDH/NF catalyst achieves an EG-to-formate faradaic efficiency of up to 90% at 1.5 V, with glycolate and oxalate as minor byproducts. Density functional theory calculations reveal that the EGOR was facilitated by the phase-separated Ni<inf>3</inf>S<inf>2</inf>, which lowers the energy barrier of the rate-limiting step. This work presents a promising, sustainable pathway for hydrogen production alongside value-added chemical generation from the electrooxidation of EG., This work was supported by the Natural Science Foundation of Sichuan (Project No. 2025ZNSFSC0139) and the China Postdoctoral Science Foundation (Project No. 2023MD734228). The authors are grateful to the Shiyanjia Lab (www.shiyanjia.com) for conducting the XPS analysis. This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 & PID2023-149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and European Union Next Generation EU/PRTR. J. Wang is grateful for the Outstanding Youth Talents of Sichuan Science and Technology Program (No. 22JCQN0061). This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is a founding member of e-DREAM. (75), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ca2+-Preintercalated V2O5 as a Dual-Function Cathode Additive for Polyiodide Anchoring in Zn-I2 Batteries

  • Bi, Xiaoyu
  • Yu, Ao
  • Zhang, Jing
  • Yu, Jing
  • Li, Canhuang
  • Ren, Yuchuan
  • Lin, Kaifu
  • Chai, Jiali
  • Xue, Qian
  • Xie, Yanting
  • Cheng, Yapeng
  • Chang, Xingqi
  • Lu, Xuan
  • Yang, Linlin
  • He, Ren
  • Zeng, Guifang
  • Huang, Chen
  • Qi, Xuede
  • Qi, Xueqiang
  • Zhang, Chaoqi
  • Arbiol, Jordi
  • Jacob, Timo
  • Cabot, Andreu
Aqueous zinc-iodine (Zn-I2) batteries have attracted considerable attention due to their abundant resources, high safety, and environmental friendliness. However, challenges inherent to conversion-type electrodes, including severe active material shuttling and suboptimal Coulombic efficiency, continue to limit their performance. Here, we present a high-performance Zn-I2 battery enabled by calcium-ion-preintercalated V2O5 (CaVO) nanobelts as a cathode additive. By harnessing the synergistic effects of physical trapping (via activated carbon and interlayer confinement in CaVO) and chemical adsorption (through Ca2+ binding sites), the hybrid host framework achieves superior immobilization of iodine species while simultaneously shortening Zn2+ diffusion pathways, thereby facilitating efficient I0/I- redox kinetics. Furthermore, Ca-induced crystal structure modification enhances the Zn2+ transport and provides additional capacity contributions. As a result, Zn-I2 cells employing I2-loaded CaVO (CaVO/AC@I2) composite cathodes deliver a high specific capacity of 244 mAh g-1 at 0.2 A g-1, outstanding rate performance with 78.5% capacity retention at 5 A g-1, and an impressive energy density of 279 Wh kg-1, based on the combined mass of I2 and CaVO. This work presents a hybrid energy storage strategy for Zn-I2 systems, providing a feasible approach for the development of next-generation high-performance aqueous batteries., X. Bi, A. Yu, J. Yu, C. Li, Y. Ren, J. Chai, Q. Xue, Y. Xie, Y. Cheng, X. Lu, L. Yang, and C. Huang thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and European Union NextGenerationEU/PRTR. C. Zhang thanks the Fujian Province Innovation Young Scientist Fund (Fund No.: 2024J08139) and the Fuzhou University Testing Fund of Precious Apparatus (Fund No.: 2024T006) for their support. T. Jacob and J. Zhang acknowledge support by the BMBF (Bundesministerium fur Bildung und Forschung) through the project CASINO (FKZ: 03XP0487G) as well as by the state of Baden-Württemberg through bwHPC and the German Research Foundation (DFG) through grant no INST 40/575-1 FUGG (JUSTUS2cluster). Additional simulations were performed on the high-performance computing cluster ULMIX provided by the Institute of Electrochemistry at Ulm University. This studFederal Ministry of Education and Research (Germany) y is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic oxidation-assisted hydrogen production: glycerol electroreforming to formate on nickel diselenide nanoparticles

  • Yang, Longcheng
  • Ma, Yi
  • Yu, Jing
  • Arbiol, Jordi
  • Li, Junshan
  • Cabot, Andreu
The energy efficiency of water electrolysis is limited by the sluggish kinetics of the anodic oxygen evolution reaction (OER), which simultaneously produces a low-value product, oxygen. A promising strategy to address this challenge is to replace OER with a more favorable oxidation reaction that yields a valuable co-product. In this study, we investigate the electrochemical reforming of glycerol in alkaline media to simultaneously produce hydrogen at a Pt cathode and formate at a NiSe₂ anode. The NiSe₂ electrode achieves a glycerol oxidation reaction (GOR) current density of up to 100 mA cm-2 in a 1 M KOH solution containing 1 M glycerol, significantly outperforming a reference elemental Ni electrode. Both electrodes exhibit high Faradaic efficiencies (FE), achieving around 93 % for formate production at an applied potential of 1.6 V vs. RHE. To rationalize this exceptional performance, density functional theory (DFT) calculations were conducted, revealing that the incorporation of Se into NiSe₂ enhances the glycerol adsorption and modulates the electron density, thereby lowering the energy barrier for the initial dehydrogenation step in the formate formation pathway. These findings provide valuable insights for the design of cost-effective, high-performance electrocatalysts for organic oxidation-assisted hydrogen production, advancing a more sustainable and economically attractive route for hydrogen generation and chemical valorization., This research was supported by the National Natural Science Foundation of China Grant No. 51978089, the Natural Science Foundation of Sichuan Province of China Grant No. 2023NSFSC1967, the Innovation Team of Chengdu Normal University Grant number CSCXTD2020B09, and Indoor Space Layout Optimization and Safety Guarantee Sichuan University Key Laboratory Open Project (SNKJ202501, SNKJ202504, SNKJ202505, SNKJ202506). L. Yang is grateful for the project (Grant MSSB-2024-02) funed by Key Laboratory of Pattern Recognition and Intelligent Information Processing, Institutions of Higher Education of Sichuan Province. It was also funded by the China Postdoctoral Science Foundation (Project No. 2023MD734228). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors thank the Shiyanjia Lab (www.shiyanjia.com) for conducting the XPS analysis. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17·I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program. ICN2 is founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in in situ and operando TEM: From basic catalysis to industry-relevant reactions and future directions

  • Llorens Rauret, David
  • Garzón Manjón, Alba
  • Arbiol, Jordi
Heterogeneous catalysis is the cornerstone of the chemical and energy sectors and is expected to be crucial in the transition from fossil fuels to sustainable energy sources. These catalytic reactions, occurring at the interface between solid catalysts and gaseous or liquid reactants, require thorough investigation for the design of highly active, stable, and selective materials. In situ transmission electron microscopy (TEM) is a sophisticated technique that combines high spatial imaging resolution with integrated spectroscopy techniques, enabling the direct observation of catalysts under realistic conditions and specific stimuli. When complemented by additional analytical methods, in situ TEM facilitates operando experiments that uncover crucial structure-property relationships. This review provides an overview of recent advancements in in situ and operando TEM applied to catalysis research, with a focus on industrially and environmentally significant reactions. Finally, we discuss the future directions and ongoing evolution of in situ TEM as a tool to drive further innovations in catalysis research., ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors acknowledge support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033, and “ERDF A Way of Making Europe” via the European Union. ICN2 is supported by the Severo Ochoa program from..., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanochemical synthesis of highly dispersed Cu on CeO2 for the reverse water-gas shift reaction

  • Lu, Xuan
  • Yu, Jing
  • Li, Junshan
  • Serrano, Isabel
  • Arbiol, Jordi
  • Cabot, Andreu
  • Llorca, Jordi
Copper-based catalysts are highly promising for carbon dioxide (CO2) reduction to carbon monoxide (CO) via the reverse water-gas shift (RWGS) reaction, owing to their efficiency, copper abundance, sustainability and cost-effectiveness. However, enhancing CO2 conversion and CO selectivity requires achieving high copper dispersion through a scalable and economical synthesis method. In this study, Cu was combined with CeO2 rods via a mechanochemical ball-milling approach to optimize performance in the RWGS reaction. Comprehensive characterization and kinetic analysis revealed how metal content influences catalyst architecture and activity. Additionally, in situ diffuse reflectance infrared Fourier transform spectroscopy was used to investigate the nature of copper species at different dispersion levels and elucidate the reaction pathway. Notably, the Cu/CeO2 catalyst with a high Cu loading (~5 wt%) and well-dispersed active sites achieved an activity (RCu(CO2)) of 4.8◊10−5 molCO2 mCu−2 s−1 with over 99% CO selectivity at 450 °C. These findings provide a robust strategy for developing high-performance Cu-based catalysts for the RWGS reaction., This work was financially supported by projects MCIN/AEI/FEDER PID2021-124572OB-C31, PID2023-149158OB-C43 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, GC 2021 SGR 01061 grant, and the SyDECat project from Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program. X.L. and J.Y. are grateful to the China Scholarship Council (CSC) for the scholarship support. IREC authors acknowledge funding from Generalitat de Catalunya 2021SGR01581 and European Union NextGenerationEU/PRTR. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. [45] J. Li is grateful for the Natural Science Foundation of Sichuan project (2025NSFSC0139)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting high-loading zinc-ion battery performance: Zn-Doped δ-MnO2 cathodes to promote Zn2+ storage

  • Chacón-Borrero, Jesús
  • Chang, Xingqi
  • Min, Zhiwen
  • Yu, Jing
  • Montaña-Mora, Guillem
  • Mejia-Centeno, Karol V.
  • Sun, Yuanmiao
  • Zhou, Xiaolong
  • Tunmee, Sarayut
  • Kidkhunthod, Pinit
  • Li, Junshan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
Rechargeable aqueous zinc-ion batteries (AZIBs) have emerged as a leading contender for stationary energy storage systems due to their low cost, safety, and environmental sustainability. However, their widespread practical application is hindered by the limited stability and capacity of current AZIB cathodes, such as manganese oxide (MnO<inf>2</inf>), which affects their long-term cost-effectiveness. To overcome this limitation, we introduce zinc (Zn) doping in δ-MnO<inf>2</inf>, which modulates the electronic states of Mn atoms, suppresses Jahn–Teller distortion, and enhances structural stability. Additionally, the use of a binder-free, self-supported porous electrode without current collectors facilitates three-dimensional ion diffusion, further improving electrochemical performance. As a result, the assembled AZIBs demonstrate outstanding rate capability, delivering 440 mAh∙g<sup>-1</sup> at 0.2 A∙g<sup>-1</sup> and retaining 118 mAh∙g<sup>-1</sup> at 24 A∙g<sup>-1</sup> for Zn-doped δ-MnO<inf>2</inf>, outperforming the bare δ-MnO<inf>2</inf> with 356 mAh∙g<sup>-1</sup> at 0.2 A∙g<sup>-1</sup> and 80 mAh∙g<sup>-1</sup> at 24 A∙g<sup>-1</sup>. Additionally, the Zn-doped δ-MnO<inf>2</inf> exhibits excellent cycling performance with ∼100 % capacity retention after 6000 cycles at 150 mAh∙g<sup>-1</sup> at 10 A∙g<sup>-1</sup>. Furthermore, Zn-doped MnO<inf>2</inf> electrodes integrated with carbon nanotubes achieve a high capacity of ∼210 mAh∙g<sup>-1</sup>, even at an ultrahigh mass loading (∼20 mg∙cm<sup>-2</sup>) at 0.6 mA∙g<sup>-1</sup>. While energy storage in MnO<inf>2</inf> involves the reaction and insertion of H<sup>+</sup>, Mn<sup>2+</sup>, and Zn<sup>2+</sup> cations, density functional theory calculations reveal that Zn intercalation is the dominant storage mechanism in these cells. Overall, this study highlights the potential of Zn-doped MnO<inf>2</inf> cathodes as a promising strategy for advancing the stability, capacity, and rate performance of next-generation AZIBs., This work was supported by the project SyDECat (PID2022–136883OB-C22), financed by the Spanish MCIN/AEI, EHAWEDRY (964524), financed by European EXCELLENT SCIENCE – Further and Emerging Technologies, the National Natural Science Foundation of China (52272054, 52125105, 52061160484, 51972329), Natural Science Foundation of Guangdong Province (2019TX05L389, 2022A1515011365), Shenzhen Science and Technology Planning Project (GJHZ20220913142809019, JCYJ20200109115624923), and the Foundation of the National Research Council of Thailand (N42A650253). Thanks to the China Scholarship Council (CSC) for the scholarship support. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Grant RED2022–134508-T (CAT&SCALE) funded by MCIN/AEI /10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16–014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM. [59] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MCIN/FEDER PID2021–124572OB-C31, CEX2023–001300-M, and GC 2021 SGR 01061., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023–001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cu and Ga dual sites on Ce0.9Zr0.1O2 for CO2 hydrogenation to methanol

  • Lu, Xuan
  • Garcia, Xènia
  • Serrano, Isabel
  • Biset-Peiró, Martí
  • Yu, Jing
  • Li, Junshan
  • Arbiol, Jordi
  • Cabot, Andreu
  • Llorca, Jordi
Cu-based catalysts are highly attractive for CO<inf>2</inf> hydrogenation to methanol due to their efficiency, selectivity, and cost-effectiveness. To further accelerate methanol synthesis, dual-site activation mechanisms are particularly effective. In this direction, solid solutions serve as effective supports, enhancing methanol production through improved hydrogenation, though the exact nature of the active sites in CuGa-based solid solutions remains unclear. In this study, we examine the synergistic interactions between Ga and Cu nanoparticles/clusters deposited on Ce<inf>0.9</inf>Zr<inf>0.1</inf>O<inf>2</inf> for CO<inf>2</inf>-to-methanol hydrogenation. Through in situ diffuse reflectance infrared Fourier transform spectroscopy and temperature-programmed (TPR/TPD), we analyze the nature of the active sites and elucidate the reaction pathway. The results demonstrate that CO<inf>2</inf> adsorption and activation are favored by the appropriate Cu/Ga ratio, while Ga sites, in addition to Cu, play a critical role in promoting H<inf>2</inf> dissociation under methanol synthesis conditions. Furthermore, the oxygen vacancies in the CuGa/Ce<inf>0.9</inf>Zr<inf>0.1</inf>O<inf>2</inf> catalyst play a crucial role in stabilizing the key *HCOO intermediate, facilitating its further hydrogenation to methanol via the formate pathway. This synergy between Ga and Cu optimizes both CO<inf>2</inf> activation and hydrogenation steps, emphasizing Ga as an active site alongside Cu and highlighting the catalyst's potential for efficient methanol production from CO<inf>2</inf>., This research was funded by projects PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and GC 2021 SGR 01061 grant. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program. X.L. and J.Y. are grateful to the China Scholarship Council (CSC) for the scholarship support. This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). IREC authors acknowledge funding from Generalitat de Catalunya 2021SGR01581 and European Union NextGenerationEU/PRTR. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM.[52] J. Li is grateful for the project from the Natural Science Foundation of Sichuan Province (2025ZNSFSC0139)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The rise of single-atom catalysts in hematite photoanodes for photoelectrochemical water splitting

  • Tang, Peng-Yi
  • Arbiol, Jordi
The urgent imperative to achieve “carbon peak and carbon neutrality” has spurred a surge of researchers to vigorously advance the development of renewable energy technologies. Under the circumstances, there is a burgeoning interest in developing diverse solar energy utilization methods. Photoelectrochemical (PEC) water splitting, a process that harnesses sunlight, semiconductor materials, and water to transform solar energy into hydrogen energy, has emerged as a promising, environmentally friendly, and cost-effective solution., This work was supported by the Hundred Talents Program (B) of the Chinese Academy of Sciences (E2XBRD1001). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials program and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors are thankful for support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/, and “ERDF A way of making Europe,” funded by the European Union. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (grant no. CEX2021-001214-S) and funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is founding member of e-DREAM. The authors thank Dr. X.Y. Jiang (2020 X-Lab, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences) for discussions., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Liquid-Solid Interface Reactions Drive Enhanced Thermoelectric Performance in Ag2Se

  • Liu, Yu
  • Kleinhanns, Tobias
  • Horta, Sharona
  • Dutkiewicz, Ewelina P.
  • Lu, Shaoqing
  • Spadaro, Maria Chiara
  • Genç, Aziz
  • Chen, Lei
  • Lim, Khak Ho
  • Hong, Min
  • Arbiol, Jordi
  • Ibáñez, María
Ag2Se is a promising n-type thermoelectric material, but its performance is limited by excessive carrier concentration, compositional inhomogeneity, and phase instability, challenges rooted in a narrow homogeneity range and uncontrolled Ag+ diffusion in the superionic phase. Here, we address these issues by exploiting liquid-solid interface reactions using CdSe complexes that remove surface excess Ag to yield stoichiometric Ag2Se and generate CdSe nanodomains that inhibit Ag+ diffusion and constrain grain growth. The resulting Ag2Se-CdSe nanocomposites exhibit a reproducible, stable figure of merit (zT) of 1.04 between 300 and 390 K. Beyond demonstrating high performance, we elucidate the interfacial chemical reactions that give rise to the observed microstructure and transport properties, providing a foundation for rationally engineering interfacial chemistry to tailor transport properties across diverse thermoelectric material systems., M.I. acknowledges financial support from ISTA and the Werner Siemens Foundation. The Scientific Service Units (SSU) of ISTA supported this work through resources provided by the Electron Microscopy Facility (EMF), the Lab Support Facility (LSF) and the Nanofabrication Facility (NNF) and the LSF Mass Spectrometry Service. The members of the Ibáñez research group are acknowledged, especially Christine Fiedler for scientific illustration and Ihor Cherniukh for valuable discussions. Y.L. acknowledges funding from the National Natural Science Foundation of China (NSFC) (Grants No. 22209034), the Innovation and Entrepreneurship Project of Overseas Returnees in Anhui Province (Grant No. 2022LCX002) and the Fundamental Research Funds for the Central Universities (JZ2024HGTB0239). K.H.L. acknowledges financial support from the National Natural Science Foundation of China (NSFC) (Grant No. 22208293). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (Project In-CAEM). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF Away of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (68) M.H. acknowledges the funding from the Australian Research Council (FT230100316 and IH200100035). M.H. acknowledges the computational support from the National Computational Infrastructure (NCI) and Pawsey Supercomputing Centre, Australia., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molybdenum carbide nanoparticles produced by pulsed laser ablation for efficient hydrogen evolution reaction in alkaline conditions

  • Iacono, Valentina
  • Rabelo Freitas, Helena
  • Lo Po', Cristiano
  • Pulvirenti, Luca
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Ruffino, Francesco
  • Mirabella, Salvo
Molybdenum carbides have emerged as an optimal alternative to noble expensive materials for hydrogen evolution reaction (HER). Most reported synthesis methods involve prolonged operations at high temperatures in reactive gases environments. In this study, we introduce nanosecond Pulsed Laser Ablation in Liquid (PLAL) as a viable and environmental friendly approach for synthesizing molybdenum carbide by ablating a molybdenum (Mo) target in ethanol. Structural and compositional characterizations on the nanoparticles (NPs) reveal no oxidation and the absence of a graphitic shell, confirming the formation of hexagonal Mo2C and cubic MoC. The NPs loaded on nickel foam exhibit significant HER activity in an aqueous 1 M KOH electrolyte, with a potential of 136 mV vs. RHE at 10 mA cm- 2 and 240 mV at 50 mA cm- 2. The calculated mass activity (0.05 A/cm2) highlights the high intrinsic activity of this material compared to conventional and non-green synthesis methods reported in literature., This work has been partially funded by European Union (Next Generation, EU), through the MUR-PNRR project PRIN IMAGE (No. P2022KACL7). The authors thank the Bio-nanotech Research and Innovation Tower (BRIT) laboratory of the University of Catania (No. PONa3_00136 financed by the MIUR) for the Smartlab diffractometer facility and the PHI Versa Probe XPS facility, thus Professor G. Malandrino (University of Catania) for discussion and experimental XRD analysis and Prof. G. G. Condorelli (University of Catania) for XPS measurements provided. The authors acknowledge F. Ursino per Raman spectrum acquisition. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. Funded by the Horizon Europe call HORIZON-INFRA-2021-SERV-01 project ReMade@ARI under grant agreement number 101058414. ICN2 is founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxygen Vacancy Formation at Metal‒TiO₂ Interface Yielding Enhanced Photocatalytic Hydrogen Generation

  • Quach, Vien-Duong
  • Harsan, Aparna
  • Spadaro, Maria Chiara
  • Botifoll, Marc
  • Arbiol, Jordi
  • Knezevic, Marija
  • Colbeau-Justin, Christophe
  • Dumeignil, Franck
  • Vezin, Hervé
  • Wojcieszak, Robert
  • Le Bahers, Tangui
  • Michel, Carine
  • Ghazzal, Mohamed Nawfal
Strong Metal-Support Interaction (SMSI) is a key concept in heterogeneous catalysis, but it remains underexplored in the context of photon-to-hydrogen conversion, as coupling of metallic nanoparticles with photocatalysts is overlooked and only discussed in terms of Schottky barrier formation. In this study, we provide deep insights into the effect of Au encapsulation with TiO2 overlayer on enhancing photocatalytic hydrogen generation. Our findings reveal that the construction of a SMSI-like nanostructure induces the formation of oxygen vacancies at the Au‒TiO2 interface which actively facilitate charge carrier separation through interfacial band reconstruction. The presence of defects is evidenced by Electron Paramagnetic Resonance and X-ray Photoelectron Spectroscopy, unveiling their relationship with photocatalytic activities. Consistent with experimental results, Density Functional Theory (DFT) calculations demonstrate that Au promotes oxygen vacancy formation. These vacancies located at the TiO2 surface significantly enhances H2O and MeOH adsorption during H2 evolution reactions. The SMSI-like concept was extended to Pt, Pd, and Ag, in which the oxygen vacancy formation energy at the metal-semiconductor interface varied depending on the metal, as computed by DFT. The results suggest that photocatalytic activity is related to the ease of oxygen vacancy formation, which is influenced by the nature of the metals., The authors appreciate the public grant overseen by the French National Research Agency (ANR) through the INGENCAT project (ANR-20-CE43-0014). V.D. Quach and M.N. Ghazzal thank Dr. Diana Dragoe (Institut de Chimie Moléculaire et des Matériaux d'Orsay, Université Paris-Saclay, CNRS UMR 8182, Orsay, France) for performing XPS measurements. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No. CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is founding member of e-DREAM.[50], With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heterostructured Copper-Palladium Phosphide Particles as Efficient Electrocatalysts for Ethanol Oxidation and Oxygen Reduction in Direct Ethanol Fuel Cells

  • Wang, Xiang
  • Montaña-Mora, Guillem
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Kallio, Tanja
  • Martínez-Alanis, Paulina R.
  • Xie, Ying
  • Cabot, Andreu
Engineering lattice strain, electronic structure, and crystallinity in palladium alloys offers a promising approach to significantly enhance their electrocatalytic performance. In this work, we present a versatile strategy to synthesize Pd-based phosphide alloys integrated with non-noble metal atoms (Pd-M-P; M = Co, Ni, Cu), characterized by expanded lattice structures and a crystalline-amorphous core-shell architecture. Catalytic performance assessments revealed that CuPdP exhibits an impressive mass activity of 7.96 A mgPd-1 for the ethanol oxidation reaction (EOR), which is 10.6 times higher than that of commercial Pd/C. This performance enhancement can be attributed to the precisely engineered lattice tensile strain and the strong p-d hybridization interaction between P and Pd. Density functional theory calculations further confirmed that these factors facilitate enhanced OH adsorption and weakened CO adsorption, thereby significantly improving EOR performance. This study presents an effective strategy for the atomic-level engineering of palladium alloy nanomaterials to achieve good electrocatalytic performance, providing a method for designing highly active catalysts., The authors thank the support from the National Natural Science Foundation of China (NSFC) (Grants No. 22302151) and Natural Science Foundation of Hubei Province (2024AFB755), IREC and ICN2 are funded by the CERCA Program/Generalitat de Catalunya. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). ICN2 is a founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Bi3+ and Cu2+ doping on the optical and electronic properties of CsPbBr3 for photocatalytic toluene oxidation

  • Knezevic, Marija
  • Hoang, Thi-Hieu
  • Quach, Vien-Duong
  • Garzón Manjón, Alba
  • Llorens Rauret, David
  • Erard, Marie
  • Gayral, Audrey
  • Benoit, Mireille
  • Berardan, David
  • Arbiol, Jordi
  • Colbeau-Justin, Christophe
  • Ghazzal, Mohamed Nawfal
Doping of metal halide perovskites (MHPs) offers an opportunity to introduce trap states that are reported to be beneficial for the charge carrier dynamics. Herein, we investigated the electronic structure-photocatalytic relationship of CsPbBr3 doped with Bi3+ and Cu2+ cations. Bi doping necessitates a reduction in the hot-injection temperature to avoid the formation of Bi nanoparticles, leading to the formation of two-dimensional CsPbBr3 with a variable aspect ratio. Bi doping causes no significant changes in the band gap energy but leads to the gradual appearance of a band-tail in the absorbance spectrum and a broad-band emission peak covering a large wavelength range. A photoluminescent quenching is observed as the ratio of Bi3+ increases, indicating shallow trap generation. Cu2+ doping does not affect the morphology of the 3D crystalline CsPbBr3 and shows a photoluminescent blueshift, which translates to a change in the bandgap energy. The CsPbBr3 doping, with an adequate amount of Cu, provides the best photocatalytic activity, surpassing Bi-doped CsPbBr3. Time-resolved photoluminescence analysis indicated that Bi3+ introduces a shallow trap that captures electrons while leaving the holes free, leading to an increase in the charge carrier lifetime, thus favoring charge carrier separation. Unlike bismuth, Cu2+ affects both the conduction and valence band positions, making the oxidation reaction more favorable., MK acknowledges the French “Ministère de l'enseignement supérieur et de la recherche” (MESR) for the PhD Grant. MNG thanks the public grant overseen by the French National Research Agency (ANR) through the IngenCat project (ANR-20-CE43-0014) and the NEXTCCUS project as part of the ERANET-ACT3 call program for the financial support. The authors thank François Brisset for his valuable help in performing the TEM analysis. The authors thank Diana Dragoe for her valuable help in performing the XPS analysis. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (grant no.: CEX2021-001214-S) and is funded by the CERCA Programme from the Generalitat de Catalunya. ICN2 acknowledges funding from the Generalitat de Catalunya 2021SGR00457. The authors thank for the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. AGM acknowledges the RyC Programme by MCIN/AEI and Ayuda RYC2021-033479-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Part of the present work was performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is a founding member of e-DREAM.49, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligand-Mediated Tailoring of Self-Supported MnxOy@Ni(OH)2 Nanoheterostructures with Enhanced OER Performance

  • Chacón-Borrero, Jesús
  • Martí-Sànchez, Sara
  • Zhang, Xuesong
  • Lu, Xuan
  • Montaña-Mora, Guillem
  • Xue, Qian
  • Berlanga, Armando
  • Llorca, Jordi
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Qi, Xueqiang
  • Guardia, Pablo
  • Cabot, Andreu
We report a colloidal synthesis strategy for producing MnxOy@Ni(OH)2 nanoheterostructures under mild conditions, i.e., low temperature and ambient pressure. The role of carboxylic acid ligands in directing the synthesis is systematically explored, revealing that lower ligand concentrations along with low-molecular weight molecules favor the formation of well-defined MnxOy@Ni(OH)2 heterostructures. Electrochemical characterization demonstrates that the resulting nanocomposites exhibit significantly enhanced electrochemical surface area and oxygen evolution reaction (OER) activity compared to their single-component counterparts. Specifically, MnxOy@Ni(OH)2 achieves a low overpotential of 299 mV at 10 mA cm-2, a Tafel slope of 61 mV dec-1, and a low charge transfer resistance of 9 Ω. The improved OER performance is attributed to the synergistic effect between the Ni(OH)2 nanosheets, which facilitate *OOH intermediate formation, and the MnO2 component, known for its intrinsic catalytic activity. Additionally, Mn3O4 serves as a stabilizing phase and precursor to MnO2, contributing to the overall durability and structural integrity of the catalyst., The authors thank the support from the Spanish Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 (Grant No. PID2022-136883OB-C22-project SyDECat- and Grant No. CNS2022-135583). P.G. acknowledges the financial support from MCIN/AEI/10.13039/501100011033 and from FSE+ within the Ramón y Cajal program (RYC2019-028414) and the ‘Severo Ochoa’. Program for Center of Excellence in R&D (Grant No. CEX2023-001263-S). Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MICIN/AEI/FEDER PID2021-124572OB-C31 and CEX2023-001300-M, and GC 2021 SGR 01061. ICN2 acknowledges funding from the Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) and by the Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AmaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDFA way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No. CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is a founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZnO Nanostars Decorated with Mass-Selected Au Clusters for Photoluminescence

  • Di Mari, Gisella Maria
  • Mineo, Giacometta
  • Hoddinott, Henry
  • Strano, Vincenzina
  • Lentini Campallegio, Claudio
  • Mundet, Bernat
  • Martí-Sànchez, Sara
  • Franzò, Giorgia
  • Arbiol, Jordi
  • Von Issendorff, Bernd
  • Held, Georg
  • Palmer, Richard
  • Bruno, Elena
  • Mirabella, Salvo
  • Spadaro, Maria Chiara
Hybrid nanostructures combining semiconductor materials and noble metal clusters of atoms (nanoparticles) are of high interest in the energy sector and catalysis, with the idea of tuning the physicochemical properties of the system toward the desired performance. The design of this type of complex system requires the appropriate selection of the material combination to optimize the desired properties. However, less attention has been devoted to the effect of cluster size. In this work, we investigate the size and density effects for mass-selected monometallic Au clusters decorating ZnO-based nanostars. The Au clusters were prepared with narrow control of their size, in terms of atoms per cluster, via cluster deposition in a vacuum and mass selection with a cluster beam source. We study the coupling of ZnO nanostars with deposited Au N (N = 55, 147, and 309) clusters. We exploit transmission electron microscopy and Rutherford backscattering spectrometry for the structural characterization and for the determination of Au cluster density, obtaining 3.43 × 1012, 4.55 × 1011, and 7.98 × 1010 clusters/cm2 for samples decorated with Au clusters containing 55, 147, and 309 atoms, respectively. Moreover, we highlight the formation of a Schottky junction by performing photoluminescence investigations. We find distinctive changes in the behavior of the visible and UV emission as a function of the cluster size and density on the ZnO-based nanostars, identifying an increase of the photoluminescence efficiency with the decrease of the cluster dimension. Our findings indicate the enormous potential that a proper selection of cluster size offers in the fabrication of nanocomposite materials with precise electronic properties., This work was financially supported by the European Union–next Generation EU, Mission 4, Component 2 via the project NanoStore, under the “PRIN PNRR 2022” call (project ID: P20227TNLX, CUP number B53D23028380001 and E53D23016050001). Funded also by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and cofunded by UK Research and Innovation (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (29) ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge the use of the InCAEM infrastructure of the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya.Cluster deposition was financially supported by both the Materials and Manufacturing Academy (M2A), part funded by the European Social Fund through the Welsh Government and the Engineering and Physical Sciences Research Council (EPSRC), and by Diamond Light Source Ltd through studentship [STU0385]. This work was supported by the project “NANOscience for STRatEgic applicatioNs from Green to healTH (NANO STRENGTH)”-Linea di Intervento 1-Progetti di Ricerca Collaborativa del “PIAno di inCEntivi per la RIcerca di Ateneo 2024/2026 Università di Catania., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin-modulated catalysis in sulfur cathodes for improved performance in lithium–sulfur batteries

  • Zhang, Chao Yue
  • Yu, Jing
  • Huang, Chen
  • Cabello, Gema
  • Qi, Xuede
  • Sun, Guo Wen
  • Zhang, Chaoqi
  • He, Ren
  • Yang, Dawei
  • Li, Canhuang
  • Li, Junshan
  • Qi, Xueqiang
  • Rubio García, Javier
  • Estrader, Marta
  • Arbiol, Jordi
  • Zhou, Jin Yuan
  • Cabot, Andreu
The rapid growth of electric vehicles and the increasing integration of renewable energy into the grid have heightened the demand for high-capacity energy storage systems based on abundant, low-cost materials. To address the limitations of conventional ion-intercalation batteries, conversion-type electrodes have gained significant attention, as their energy storage relies on chemical redox reactions often requiring activation or acceleration via electrocatalysis. Recent studies reveal that electrocatalytic activity is governed not only by active-site density and charge-carrier availability, but also by the spin states of electrons within the catalyst. Consequently, understanding the role of electronic spin states in battery performance, and how to manipulate them to enhance energy storage, has become a critical research frontier. This review provides a comprehensive overview of current strategies to modulate spin states in electrocatalysts for conversion-type cathodes. While external magnetic fields remain the primary method to probe and control electron spin, more practical and scalable approaches, such as atomic coordination engineering and surface spin filters, are emerging. Particular focus is given to sulfur cathodes, which offer exceptional theoretical energy density and capacity but depend heavily on catalytic hosts to enable efficient sulfur redox reactions. The review also surveys experimental techniques for probing spin states and theoretical approaches for modeling spin-related phenomena at the atomic scale. Finally, it highlights emerging research directions, underscoring the potential of spin-state modulation as a transformative strategy for next-generation energy storage technologies., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). The authors acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033 and from Generalitat de Catalunya 2021 SGR 01581 and European Union NextGenerationEU/PRTR. J. Yu, C. Huang, C. Li, and Y. Ren thank the China Scholarship Council for the scholarship support. G. W. Sun thanks the Fundamental Research Funds for the Central Universities (lzujbky-2023-it36), and the Outstanding Graduate “Innovation Star” Project of Gansu Provincial Education Department, China (No.2023CXZX-058). J. S. Li acknowledges financial support from the Natural Science Foundation of Sichuan province (2022NSFSC1229). The authors also greatly acknowledge the support from the Supercomputing Center of Lanzhou University, China. D.W.Y. acknowledges support from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064). M.E. acknowledges support from ‘Departament de Recerca i Universitats: del Departament d'Acció Climàtica, Alimentació i Agenda Rural i Fons Climàtic de la Generalitat de Catalunya’ with the grant 2023CLIMA00022. The Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge the Advanced Materials programme (Project In-CAEM) by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors are grateful for support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 is founding member of e-DREAM, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Engineering p-d Coupling at Fe-Bi and Zn-Bi Sites for Efficient Li-S Conversion

  • Yu, Jing
  • Liang, Zhifu
  • Zhou, Xianggui
  • Zhang, Chaoqi
  • Pinto, Iván
  • Usoltsev, Oleg
  • Zhang, Chao Yue
  • Robertson, Alex W.
  • Cabot, Andreu
  • Arbiol, Jordi
Electrocatalytic sulfur hosts are crucial for high-performance, lightweight lithium-sulfur (Li-S) batteries, demanding atomically dispersed metals with precisely tuned electronic structures. Here, we present 3d-6p dual-atom catalysts (DACs) composed of earth-abundant Fe-Bi or Zn-Bi pairs anchored on nitrogen-doped carbon. Aberration-corrected scanning transmission electron microscopy and X-ray absorption spectroscopy confirm atomically dispersed bimetallic centers stabilized through TM-N coordination. In Li-S cells, DACs, particularly Fe-Bi, markedly accelerate polysulfide conversion, achieving near-ideal discharge plateau ratios, superior rate capability with >50% capacity retention at 3C, and about 80% retention after 1000 cycles at 1C. Density functional theory indicates that Bi induces strong ligand-field and p-d coupling effects, shifting Fe 3d states toward the Fermi level and polarizing Zn through charge redistribution. This Bi-driven cooperative activation transcends d-electron limitations, offering a general and scalable route to high-rate, durable Li-S electrocatalysts., ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge support of the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. IREC acknowledges funding from CERCA Programme/Generalitat de Catalunya, Generalitat de Catalunya 2021SGR01581, SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), and European Union NextGenerationEU/PRTR. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.Y. has received funding from the CSC-UAB PhD scholarship program. I.P.-H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). Authors thank the beamtime at CLAESS beamline in ALBA Synchrotron. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (22), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfur-Bridged Dual Fe-N4 Sites to Boost Lithium-Sulfur Battery Performance

  • Cheng, Yapeng
  • Ma, Jiachen
  • Li, Canhuang
  • Li, Yao
  • Li, Hao
  • Zhang, Chaoqi
  • Yu, Jing
  • Cai, Shichang
  • Wu, Fanglin
  • Zhu, Jiawei
  • Bi, Xiaoyu
  • Ren, Yuchuan
  • Xie, Yanting
  • Xue, Qian
  • He, Ren
  • Li, Zeyan
  • Pinto, Iván
  • Arbiol, Jordi
  • Lu, Jing
  • Guo, Zhengxiao
  • Zhang, Haining
  • Cabot, Andreu
Despite the growing interest in d-block single-atom catalysts (SACs) for lithium-sulfur (Li-S) batteries, the localized nature of their 3d orbitals imposes a substantial energy barrier for activating sulfur intermediates during redox reactions. This limitation stems from the low mobility of electrons in 3d orbitals, which hampers effective hybridization with the 2p orbitals of lithium polysulfides (LiPS). Here, we report a single-atom iron catalyst anchored on a nitrogen-doped porous carbon scaffold, featuring a unique axial dual-layer Fe-N4 structure bridged by a sulfur atom (Fe-SNC), designed to overcome these limitations. The axial configuration, stabilized by the S bridge, enables delocalization of Fe 3d orbitals and promotes dynamic electron transfer between the dual Fe-N4 layers, thereby enhancing bidirectional Li-S redox kinetics. LiPS adsorption tests, density functional theory (DFT) calculations, symmetric-cell cyclic voltammetry, and potentiostatic deposition/dissolution experiments confirm the superior catalytic activity of Fe-SNC. When applied in Li-S cells, the S@Fe-SNC cathode achieves an initial capacity of 1550 mAh g-1 at 0.1C and 724 mAh g-1 at 3C, retaining 546 mAh g-1 after 1200 cycles at 3C. Under high-sulfur-loading (7.5 mg cm-2) and lean-electrolyte conditions (E/S = 4.7 μL mg-1), it reaches excellent areal performance at 8.0 mAh cm-2. DFT results attribute the high activity to efficient interlayer electron transfer and an asymmetric dynamic spin evolution across the dual Fe-N4 layers. This asymmetric spin distribution facilitates enhanced d-p orbital hybridization, particularly π-type coupling between Fe 3dxz/yz and S 2p orbitals, thereby improving conductivity, intermediate binding strength, and overall reaction kinetics., This work was supported by the National Natural Science Foundation of China (22279096). Y.C. thanks the China Scholarship Council (CSC) for the scholarship support. A.C. acknowledges financial support from Generalitat de Catalunya 2021SGR01581 and from the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). Authors acknowledge the High-performance Computing Platform of Peking University. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge the use of the InCAEM infrastructure of the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.Y. has received funding from the CSC-UAB PhD scholarship program. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (38) Authors acknowledge the Research Grants Council (RGC) of Hong Kong (Project 17300424), the RGC-TRS (T23-713/22-R) award, the HK Environment and Conservation Fund (ECF 2021-152; ECF2021-141), and the European Union-Hong Kong Research Cooperation Co-Funding Mechanism by the Research Grants Council sponsored by the RGC (E-HKU701/23 and GH2-101070721)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-spin state electron configuration in Mn-doped Ni3Se4 for efficient methanol oxidation

  • Zhang, Yong
  • Ma, Yi
  • Yu, Jing
  • Li, Canhuang
  • Arbiol, Jordi
  • Wang, Xiaoxi
  • Jian, Ning
  • Ge, Huan
  • Li, Luming
  • Cabot, Andreu
  • Li, Junshan
The methanol oxidation reaction (MOR) to formic acid offers a promising alternative to the anodic oxygen evolution reaction (OER) in water electrolysis. However, the development of efficient and cost-effective catalysts remains a primary challenge. In this study, an enhancement in catalytic MOR performance is achieved through the incorporation of Mn atoms with unsaturated t<inf>2</inf><inf>g</inf> orbitals into Ni<inf>3</inf>Se<inf>4</inf>. Comprehensive experimental analyses and theoretical calculations reveal that substituting Ni with Mn induces strong electron-withdrawing effects, effectively modulating the local coordination environment of the metal centers. The presence of Mn also elongates Ni–Se(O) bonds, which reduces e<inf>g</inf> orbital occupancy and modifies the spin state of the material. Electrochemical measurements demonstrate that electrodes based on this optimized material exhibit a high spin state and deliver excellent catalytic activity, achieving a MOR current density up to ∼190 mA cm<sup>−2</sup> at 1.6 V. This performance enhancement is attributed to the favorable electronic configuration and reduced reaction energy barriers associated with the high-spin state., This research was financially supported by the Sichuan Science and Technology Program (Grant No. 2025NSFSC0139), and the China Postdoctoral Science Foundation (Grant No. 2023MD734228). The authors extend their gratitude to Ms. Zhou Yuke (from Scientific Compass www.shiyanjia.com) for providing invaluable assistance with the XPS analysis. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program. ICN2 is founding member of e-DREAM [87]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving Ni(OH)2 electrocatalysis with graphene quantum dots

  • Urso, Mario
  • Battiato, Sergio
  • Gholamiarjenaki, Nabiollah
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Sanna, Michela
  • Kumar, Sanjay
  • Pumera, Martin
  • Terrasi, Antonio
  • Priolo, Francesco
  • Mirabella, Salvo
Water splitting is a critical process for sustainable energy transition, involving the electrolysis of water into its constituent elements, hydrogen and oxygen. In this study, we demonstrate the superior electrocatalytic activity of graphene quantum dots (GQDs)-decorated nickel hydroxide (Ni(OH)<inf>2</inf>) nanostructures for the oxygen evolution reaction (OER) in alkaline media. Ni(OH)<inf>2</inf> nanowalls are synthesized on graphene paper substrates by chemical bath deposition (CBD) and uniformly decorated with GQDs. Precise optimization of the GQDs amount indicates that a low number of GQDs offers limited improvement of the OER, while a high number is unfavorable due to the minor exposed surface of the electrocatalyst. Instead, an intermediate quantity of GQDs significantly enhances the OER performance metrics, leading to a low overpotential at 10 mA cm<sup>−2</sup> current density (η<inf>10</inf>) of 308 mV and a Tafel slope of 53 mV dec<sup>−1</sup>, rapid electron transfer, high turnover frequency (TOF) of 5.5 × 10<sup>−2</sup> s<sup>−1</sup> at 350 mV overpotential, large electrochemically active surface area (ESCA) of 145 cm<sup>2</sup>, good durability, and good cycling stability in 1 M KOH electrolyte (pH 14). Mott–Schottky analysis sheds light on the OER mechanism, revealing the role of GQDs in increasing the surface hole density of Ni(OH)<inf>2</inf>, thereby boosting the OER efficiency., M.U. acknowledges the financial support by the Ministry of University and Research, under the “PNRR─Missione 4 “Istruzione e Ricerca”─Componente 2 “Dalla Ricerca all’Impresa” Investimento 1.2 “Finanziamento di progetti presentati da giovani ricercatori”, project ID: SOE_0000044, CUP number: E63C22002970006. This work was supported by the project "NANOscience for STRatEgic applicatioNs from Green to healTH (NANO STRENGTH)" - Linea di Intervento 1- Progetti di Ricerca Collaborativa del “PIAno di inCEntivi per la RIcerca di Ateneo 2024/2026 Università di Catania. This research was funded by the project AIM1804097 Programma Operativo Nazionale FSE −FESR “Ricerca e Innovazione 2014–2020” and partially funded by European Union (NextGeneration EU), through the MUR-PNRR project SAMOTHRACE (ECS00000022). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. Funded by the Horizon Europe call HORIZON-INFRA-2021-SERV-01 project ReMade@ARI under grant agreement number 101058414. ICN2 is founding member of e-DREAM. [71] The work was supported by ERDF/ESF project TECHSCALE (No. CZ.02.01.01/00/22_008/0004587). This research was co-funded by the European Union under the REFRESH - Research Excellence For REgion Sustainability and High-tech Industries project number CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic-inorganic catalytic separator for robust Li-S batteries via ethanedithiol-functionalized VSe2 with ligand strategy

  • Lin, Kaifu
  • Zhang, Chaoqi
  • Fei, Ban
  • Yu, Jing
  • Li, Canhuang
  • Chen, Qidi
  • Cai, Daoping
  • Sa, Baisheng
  • Chen, Wenwei
  • Yang, Dawei
  • Arbiol, Jordi
  • Cabot, Andreu
  • Zhan, Hongbing
Overcoming polysulfide shuttling and sluggish sulfur electrochemistry remains pivotal for viable lithium-sulfur batteries. Herein, we develop an organic–inorganic catalytic interface engineered through molecular anchoring of ethanedithiol (EDT) on VSe<inf>2</inf> nanosheets (SH-VSe<inf>2</inf>), which concurrently tailors the electronic structure and mediates dynamic redox processes. EDT coordination upshifts the d-band center of vanadium sites, strengthening polysulfide chemisorption while enhancing intrinsic catalytic activity. Critically, the surface-tethered EDT operates as a non-migratory redox mediator, drastically reducing Li<inf>2</inf>S nucleation/dissolution barriers through forming –SLi intermediate. When this catalyst is located at the cell separator, this synergistic design enables to transcend conventional adsorption-catalysis trade-offs in individual inorganic or organic catalyst systems by integrating polysulfide confinement with accelerated reaction kinetics. Consequently, Li–S batteries achieve exceptional rate capability (>760 mAh g<sup>−1</sup> at 8C), extended cyclability (>80 % capacity retention over 500 cycles), and practical operation under high sulfur loading (5.2 mg cm<sup>−2</sup>). This work establishes a new strategy to boost Li–S cell performance based on the incorporation of organic redox mediator coupling inorganic catalysts by ligand functionalization., This work was financially supported by the Natural Science Foundation of Fujian Province, China (2024J08139) and the Fuzhou University Qishan Scholar Overseas Project Fund (XRC-23121). IREC and ICN2 are funded by the CERCA Program / Generalitat de Catalunya. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN / AEI /10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). ICN2 is founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mn-modified nickel oxide for selective methanol oxidation: a route toward integrated formate electrosynthesis and hydrogen generation

  • Jian, Ning
  • Ma, Yi
  • Ge, Huan
  • Zhang, Yong
  • Hu, Jiwei
  • Ke, Yun
  • Li, Chaochao
  • Yu, Jing
  • Arbiol, Jordi
  • Liu, Junfeng
  • Cabot, Andreu
  • Li, Junshan
The overall energy efficiency of water electrolysis is constrained by the inherently slow kinetics of the oxygen evolution reaction (OER), which also generates a product of limited economic value. A promising strategy to overcome this drawback involves replacing OER with a more thermodynamically and kinetically favorable anodic reaction that enables hydrogen generation at lower energy input while simultaneously producing value-added chemicals. In this work, we investigate the electrochemical reforming of methanol under alkaline conditions, using a Mn-doped nickel oxide (Mn-NiO) anode to catalyze methanol oxidation to formate, coupled with hydrogen evolution at a platinum cathode. The Mn-doped NiO electrode achieves a methanol oxidation reaction (MOR) current density of 58 mA cm<sup>−2</sup> at 1.6 V vs. RHE in 1 M KOH with 1 M methanol, significantly outperforming undoped NiO. Both electrodes exhibit excellent faradaic efficiency, with formate generation reaching approximately 97%. The Mn-doped NiO electrode exhibited remarkable stability, maintaining a steady current density of 33.8 mA cm<sup>−2</sup> during continuous chronoamperometric (CA) testing for 100 h at 1.65 V vs. RHE in 1 M KOH containing 1 M methanol. When the electrolyte concentration was increased to 3 M KOH, the electrode delivered a methanol oxidation reaction (MOR) current density of 123 mA cm<sup>−2</sup>, which gradually decreased to 61.1 mA cm<sup>−2</sup> after 24 h of CA operation. Density functional theory calculations reveal that Mn incorporation modulates the electronic structure of NiO, effectively lowering the energy barrier for methanol-to-formate conversion. These findings provide valuable insights for the design of low-cost, high-efficiency electrocatalysts that integrate organic oxidation with hydrogen evolution, offering a more energy-efficient and economically attractive route for hydrogen production and chemical valorization., This work was supported by the National Natural Science Foundation of China (22579020), Sichuan Science and Technology Program (2025NSFSC0139), and the China Postdoctoral Science Foundation (2023MD734228). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No. CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing
  • Usoltsev, Oleg
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto, Iván
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi
  • Lu, Xuan
  • Gupta, Kapil
  • Botifoll, Marc
  • Simonelli, Laura
  • Fauth, François
  • Zhou, Jin Yuan
  • Llorca, Jordi
  • Lu, Yan
  • Zhang, Chao Yue
  • Arbiol, Jordi
  • Cabot, Andreu
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly Li2S nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid Li2S nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications., IREC and HZB acknowledge financial support from the European Union (Grant agreement No. 101104006 ─ HEALINGBAT ─ HORIZON-CL5-2022-D2-01). J.Y. and C.H. thank the China Scholarship Council for the financial support. C.Y.Z. and J.Z. acknowledge the support of the Supercomputing Center of Lanzhou University, China. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. I.M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101081337. XAS experiments were performed at the beamline-22-CLÆSS (Proposal Number: 2024068488),[50] and operando XRD was performed in beamline BL04-MSPD (Grant Number: 2023097750) at ALBA Synchrotron, Spain. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). IREC acknowledges funding from Generalitat de Catalunya 2021SGR01581, the European Union NextGenerationEU/PRTR, the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, and the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). J.L. is a Serra Húnter Fellow and is grateful to projects MICIN/FEDER PID2024-156765OB-C21 and CEX2023-001300-M (MCIN/AEI 10.13039/501100011033). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work was performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.[51], With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Electrochemical Nucleation and Growth in Battery Electrodes under Reactant-Limited Conditions

  • Yu, Jing
  • Martynova, Irina
  • Li, Zeyan
  • Li, Canhuang
  • Zhang, Chaoqi
  • Sun, Qing
  • Arbiol, Jordi
  • Cabot, Andreu
Nucleation and growth of solid phases from species dissolved in an electrolyte govern battery performance, defining capacity, efficiency, rate capability, stability, and safety. However, classical nucleation-growth models often do not realistically describe working cells, failing to capture highly asymmetric out-of-plane growth and finite reactant supply. Here, we introduce a nucleation-growth model to fit potentiostatic nucleation transients that explicitly accounts for a finite amount of reactant and its depletion, reproducing the characteristic current rise upon nucleation, peak, and subsequent decay without ad hoc corrections. Both instantaneous nucleation and progressive nucleation are considered. The model is applied to the nucleation and growth of Li2S at a catalyzed electrode from a lithium polysulfide solution, yielding nucleus densities of up to 6.7 × 109 cm-2 and an effective reaction rate constant of 1.8 × 10-3 s-1. Beyond Li-S batteries, the framework can be extended to other conversion and metal-deposition chemistries in which finite-supply effects dominate., IREC acknowledges funding from CERCA Programme/Generalitat de Catalunya, Generalitat de Catalunya 2021SGR01581, SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), and European Union NextGenerationEU/PRTR. This work was partially funded by the European Union (Grant Agreement 101104006 - HEALING BAT - HORIZON-CL5-2022-D2-01). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. I. M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101081337. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors acknowledge support from the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors are thankful for the support from project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science Ph.D. program. J.Y. has received funding from the CSC-UAB Ph.D. scholarship program. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM. (17), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced electrocatalytic methanol oxidation to formate on iron-substituted nickel oxide

  • Jian, Ning
  • Ma, Yi
  • Ge, Huan
  • Tang, Jialing
  • Yu, Jing
  • Arbiol, Jordi
  • Hu, Jiwei
  • Ke, Yun
  • Li, Chaochao
  • Cabot, Andreu
  • Li, Junshan
Electrochemical methanol oxidation reaction (MOR) provides a promising route to reduce the anodic overpotential of water electrolysis while co-generating value-added chemicals. However, developing cost-effective catalysts that achieve highly efficient and selective methanol-to-formate conversion remains a significant challenge. In this work, we developed a series of potential cost-effective electrocatalysts synthesized via a hydrothermal-calcination route. Among them, the iron-substituted nickel oxide (Fe-NiO) electrode delivers the highest current density of ∼150 mA cm-2 at 1.60 V vs. RHE, and remarkable MOR selectivity with a formate Faradaic efficiency of ∼100%, largely above control samplesof pristine NiO-, and Fe2O3-based electrode. At a lower external potential of 1.55 V, this electrode presents a remarkable stability, sustaining a high current density over 100 mA cm-2 even at the end of 100 h operation.Advanced characterization combined with density functional theory (DFT) calculations reveals that Fe incorporation modulates the electronic structure of NiO, optimizes the adsorption of key reaction intermediates, and significantly reduces the energy barrier of the rate-determining step. This work establish an effective electronic-structure engineering strategy for designing earth-abundant, high-performance MOR electrocatalysts and provides mechanistic insights into tuning metal oxides for energy-efficient hydrogen co-production., This research was financially supported by the National Natural Science Foundation of China (Grant No. 22579020), the Natural Science Foundation of Sichuan province (Grant No. 2025YFHZ0127), and the China Postdoctoral Science Foundation (Grant No. 2023MD734228). The authors extend their gratitude to Ms. Zhou Yuke (from Scientific Compass www.shiyanjia.com) for providing invaluable assistance with the XPS analysis. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program. ICN2 is a founding member of e-DREAM [85]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chloroplasts-derived Ni-based electrocatalyst for efficient electrochemical ethanol oxidation to acetate with hydrogen cogeneration

  • Mejia-Centeno, Karol V.
  • Alarcón-Cabrera, Cristhyan C.
  • Chacón-Borrero, Jesús
  • Gong, Li
  • Yang, Linlin
  • Freitas, Fernanda M.
  • Yu, Jing
  • Llorens Rauret, David
  • Garzón Manjón, Alba
  • Carreón-Castro, María del Pilar
  • Tarancón, Albert
  • Llorca, Jordi
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The electrochemical oxidation of biomass-derived organic molecules offers a dual advantage in hydrogen electrolysis: (i) it replaces the sluggish oxygen evolution reaction, accelerating hydrogen generation, reducing cell voltage, and enhancing energy efficiency, and (ii) it valorizes carbon-neutral organic resources into higher-value chemicals. However, the commercial adoption of this strategy relies on the development of electrocatalysts that are cost-effective, energy-efficient, selective, and stable. In this context, biomass not only provides the reactant but also serves as an exceptional resource for creating highly porous and active carbon-based electrocatalysts. In this work, we present a Ni-based electrocatalyst derived from biomass waste, specifically using natural chlorophyll extracted from discarded grape leaves. This catalyst achieves an impressive 86 % Faradaic efficiency for the ethanol oxidation reaction to acetate at 1.5 V, attributed to its large surface area and excellent charge transfer properties. Moreover, it enables 100 % hydrogen production as a co-product at 1.5 V during ethanol oxidation, enhancing its value for energy applications. This study highlights the transformative role of integrating renewable biomass into catalytic systems, demonstrating the potential of biomass-derived materials to drive innovation in electrocatalysis. By converting waste biomass into functional catalysts, this approach advances energy-efficient technologies and addresses environmental challenges of conventional synthesis., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022–136883OB-C22 & PID2023–149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and European Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of Science, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023–042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. AGM has received funding from Grant RYC2021‐033479‐I funded by MCIN/AEI/ 10.13039/501100011033 and by European Union NextGenerationEU/PRTR. JY has received funding from the CSC-UAB PhD scholarship program. D.L.R. acknowledges grant PRE2022–102638. ICN2 is founding member of e-DREAM.83 J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects PID2024-156765OB-C21 and Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI 10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cascade electrocatalysis via Cu-O-C interfaces for ultralow-Pd formate oxidation

  • Yuan, Hu
  • Yu, Fan
  • Xue, Qian
  • Jiang, Wu
  • He, Deqin
  • Zeng, Yi
  • Qi, Xueqiang
  • Yang, Linlin
  • Yu, Jing
  • Arbiol, Jordi
  • Cabot, Andreu
Direct formate fuel cells (DFFCs) are promising clean-energy devices, yet the efficiency of Pd-based anodes is limited by the strong adsorption of reaction intermediates, particularly adsorbed hydrogen (H<inf>ad</inf>). This blockage of active sites raises the overpotential and slows reaction kinetics, while compensating with high Pd loading further increases cost. Here, we design a Pd-lean catalyst featuring a dual-function interface that simultaneously mitigates intermediate poisoning and enhances precious-metal utilization. The catalyst consists of Cu-rich Pd-Cu nanoparticles (∼2–3 nm) anchored on carbon nanotubes coated with a tannic-acid-derived, oxygen-doped carbon layer. The engineered Cu-O-C interface promotes water dissociation at low potentials, supplying interfacial hydroxyl species (OH<inf>ad</inf>), while Cu alloying downshifts the Pd D-band center, significantly weakening the Pd-H binding energy (HBE) and facilitating H<inf>ad</inf> desorption. This cascade electrocatalysis accelerates the H<inf>ad</inf>-OH<inf>ad</inf> coupling step, which is the rate-determining step in formate oxidation, thereby enabling rapid regeneration of active sites. As a result, the catalyst achieves a peak mass activity of 5.59 A mgPd<sup>−1</sup> at −0.31 V (vs. Hg/HgO), which is 4.9 times higher than that of commercial Pd/C. Remarkably, this performance is obtained with an ultralow Pd loading of only 1.54 wt %, demonstrating exceptional precious-metal utilization efficiency., This work was financially supported by the Natural Science Foundation of Chongqing (No. 2023NSCQ-MSX1669), and the Science and Technology Research Program of Chongqing Municipal Education Commission (No. KJZD-K202401110). ICN2 is supported by the Severo Ochoa program from the Spanish MCIN / AEI (Grant No. CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16–014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM [64]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-pot fabrication of GA-functionalized Cu-nanoparticles by pulsed laser ablation for electrochemical biosensors development

  • Iacono, Valentina
  • Rabelo Freitas, Helena
  • Pulvirenti, Luca
  • Piper, Andrew
  • Merkoçi, Arben
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Ruffino, Francesco
  • Mirabella, Salvo
Functionalized nanoparticles (NPs) are widely used in nanobiosensor fabrication providing improved selectivity and good conductivity. Synthesis of functional nanomaterials is often costly and typically requires several functionalization steps. In this work, we used Pulsed Laser Ablation in Liquids (PLAL) to synthetize and functionalize at the same time copper (Cu) NPs with glutamic acid (GA). A Cu target immersed in a GA solution and hit by a laser led to Cu ablation, NP formation and amine groups bonding at the NPs surface. The GA-functionalized Cu NPs were immobilized onto an electrode and linked to antibodies for alpha-synuclein protein. A successful protein detection was achieved through electrochemical impedance spectroscopy (EIS) measurements at concentration in the pg/mL range. A careful optimization of NP synthesis showed an improved experimental LoD (10 pg/mL) by varying the amount of GA- Cu NPs and the PLAL environment, demonstrating this one-pot fabrication of GA-functionalised Cu-nanoparticles by PLAL as a valuable method for high sensitivity electrochemical sensing electrode., This work has been partially funded by European Union (NextGeneration EU), through the MUR-PNRR project SAMOTHRACE (Grant No. ECS00000022). The authors thank the Bio-nanotech Research and Innovation Tower (BRIT) laboratory of the University of Catania for the PHI Versa Probe XPS facility and Prof. G. G. Condorelli (University of Catania) for XPS measurements provided. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Grant RED2022-134508-T (CAT&SCALE) funded by MCIN/AEI /10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM ​[59]. Partially funded also by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Operando Observation of Inter-Particle Li+ Transport in Layered Bimetallic Sulfides for High-Rate Lithium-Sulfur Batteries

  • Chen, Lei
  • Chen, Kaizhi
  • Yu, Jing
  • Yang, Dawei
  • Wang, Yunxiao
  • Li, Canhuang
  • Lei, Yao-Jie
  • Zhang, Jie
  • Mou, Jirong
  • Gong, Qianhong
  • Bi, Wei
  • Yuan, Chao
  • Xiao, Zhenyu
  • Xu, Ligang
  • Diao, Jiefeng
  • Tang, Mingxue
  • Henkelman, Graeme
  • Arbiol, Jordi
  • Zhou, Guangmin
  • Cabot, Andreu
  • Lai, Wei-Hong
The slow reaction kinetics, particularly at high rates, hinder the practical use of lithium-sulfur batteries (LSBs). To overcome the inadequate ion transport in conventional electrodes, a two-dimensional layered bimetallic sulfide (FeMo2S4) as a sulfur host, creating fast ion-conduction pathways is developed. Using a free-standing FeMo2S4/carbon cloth cathode with a Li2S6 catholyte, high-rate performance is achieved. Crucially, in situ high-resolution TEM directly visualized rapid inter-particle lithium ion transport between the layered FeMo2S4 flakes, offering direct evidence of enhanced kinetics. This phenomenon, combined with strong polysulfide adsorption and high catalytic activity, boosts reaction rates. The Li2S6-based battery delivered a high initial capacity of 1516 mAh g−1 and outstanding stability with only 0.028% decay per cycle at 3C. This work highlights the effectiveness of layered hosts with fast ion channels and bimetallic catalysis for durable, high-rate LSBs., Prof. D. W. Yang and Prof. W. H. Lai thank for the funding from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064 and Grants No. 22575055). Prof. D. W. Yang also thanks for the funding from the Henan Provincial Science and Technology Research and Development Joint Fund-Young Scientist Project (Grants No. 235200810054). A. Cabot acknowledges support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, Generalitat de Catalunya 2021SGR01581 and European Union Next Generation EU/PRTR. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant Number.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-Electrode Tandem Electrocatalysis with Dual TiO2@Cu and Cu Surfaces Enables Energy-Efficient Ammonia Production from Nitrate

  • Chávez, Marcelo E.
  • Khairani, Inna Y.
  • Biset-Peiró, Martí
  • Martí-Sànchez, Sara
  • Villa, Katherine
  • Arbiol, Jordi
  • Morante, Joan Ramón
  • Gökce, Bilal
  • Murcia-López, Sebastián
Electrochemical ammonia synthesis from nitrate can complement a hydrogen-based energy system with a liquid, shippable energy carrier. Ammonia (NH3) is attractive because it serves both as an energy vector and as an essential feedstock. However, nitrate reduction is an eight-electron, proton-coupled pathway that forms multiple intermediates; the NO3– → NO2– step is widely viewed as rate-determining, followed by nitrite reduction and hydrogenation steps, until the formation of NH3. Here, we implement a tandem strategy in a flow cell using a double-sided electrode with Cu and TiO2@Cu surfaces that cooperatively boost the NO3– → NO2– and NO2– → NH3 conversions. The system achieves a Faradaic efficiency toward NH3 of 97%, with an NH3 selectivity of 80%, and a productivity of 7.7 mg h–1 cm–2 (0.45 mmol h–1 cm–2), corresponding to a full-cell energy efficiency of 29%. This integrated electrode–reactor design expands the accessible performance space for the NO3RR by combining nitrate adsorption with selective nitrite hydrogenation. These results establish a practical route for the efficient electrochemical synthesis of NH3 from nitrate., IREC and UW acknowledge financial support from the LESGO project (Code: 952068. H2020-EU.1.2.2. funded). IREC thanks Generalitat de Catalunya for financial support through the CERCA Program and M2E (2021_SGR01581). IREC also acknowledges support from the European Regional Development Funds (ERDF, FEDER) and by MCIN/AEI/10.13039/501100011033 CERES project (PID2020 116093RB-C42). M.E.C. acknowledges the Formacion Profesional de Investigadores Program (PRE2018-083575). S.M.L gratefully acknowledges grant RYC2022-036510-I funded by MICIU/AEI/10.13039/501100011033 and by ESF+. ICN2 is funded by the CERCA Program/Generalitat de Catalunya. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors acknowledge the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). ICN2 is a founding member of e-DREAM. (62) Authors kindly thank Dr. Georgiana Stoica for her assistance in the EPR characterization., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards circular batteries: A water-soluble, recyclable, self-healing binder for aqueous-processed sulfur cathodes

  • Ren, Yuchuan
  • Xue, Qian
  • Lu, Liqiang
  • Li, Canhuang
  • Li, Guanjie
  • Kardjilov, Nikolay
  • Manke, Ingo
  • Zhao, Jiaqi
  • Lu, Xuan
  • Yu, Jing
  • Zeng, Guifang
  • Bi, Xiaoyu
  • Zhang, Shengnan
  • Berlanga, Armando
  • Huang, Chen
  • Qi, Xuede
  • Qi, Xueqiang
  • Arbiol, Jordi
  • Lu, Yan
  • Tan, Guoqiang
  • Guo, Zaiping
  • Cabot, Andreu
Sulfur cathodes have attracted considerable attention due to their potential for high energy density and cost-effectiveness. However, their limited stability, in part stemming from volume changes during cycling and the dissolution and migration of metal polysulfides, has hindered their commercialization. Binders play a critical role in preventing electrode delamination, while potentially contributing additional functionalities, such as trapping polysulfides. In this work, we introduce an aqueous-processable sulfur cathode binder composed of polyvinyl alcohol (PVA) and polyethylene glycol (PEG). Multiple hydrogen bonding interactions provided by the PVA/PEG binder hydrogen-bond network enhance metal-ion diffusion and trap polysulfides, thereby reducing their dissolution. Additionally, microcracks generated during the cycling can be healed by the dynamic hydrogen-bond network. Thereby, in lithium-sulfur cells, PVA/PEG-based cathodes exhibit an ultralow per-cycle capacity fade of 0.0023% over 600 cycles at 1C, and deliver up to 677 mAh/g in lean-electrolyte pouch cells (E/S = 4 µL/mg), retaining 99% of the initial capacity after 100 cycles at 0.1C in pouch cell. Theoretical calculations and molecular dynamics simulations confirm the superior adsorption energy and repairability of the PVA/PEG binder, reinforcing its ability to stabilize the cathode. Additionally, PVA/PEG-based cathodes exhibit excellent flame retardancy, support eco-friendly and closed-loop recycling due to the binder’s water solubility, which allows for easy electrode material reutilization., This work was partially funded by the European Union (Grant agreement No. 101104006 — HEALING BAT — HORIZON-CL5-2022-D2-01). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. The authors acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033 and from the Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 and European Union Next Generation EU/PRTR. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. YC.R., Q.X. and LQ.L did the same contribution for this work. YC. R., Q.X., CH. L., X.L., J.Y., GF.Z., XY.B., C.H., thank for the China Scholarship Council for the scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomic Imaging of Ion-Triggered Flexibility and Local Electric Field Response in Zeolite Rings

  • Chen, Qiang
  • Ding, Zhao-Bin
  • Cao, Pengfei
  • Chu, Minghui
  • Cai, Yichun
  • Li, Zhuoxi
  • Sun, Zongyu
  • Lu, Penghan
  • Jo, Janghyun
  • Chen, Junwen
  • Liu, Jianqiang
  • Zhao, Jian
  • Steinrück, Hans-Georg
  • Mayer, Joachim
  • Arbiol, Jordi
  • Yu, Tongwen
Zeolite flexibility triggered by ion-exchange tuning pore geometry impacts the responsive interactions with guest species in selective adsorption and industrial catalysis. However, direct observation of their local atomic structure deformation and subsequent fundamental flexibility correlation between ions and atomic microenvironment remains elusive. Here, we report atomic-resolution imaging of the microscopic ring flexibility in ion-exchanged MFI zeolites, revealing how ion-induced electric field alterations drive the framework distortions. Specifically, extra-framework Ba2+ ions confined within the 10-membered rings (10-MRs) trigger a 0.5 Å channel expansion, which exceeds the 0.2 Å expansion induced by Na+ ions while maintaining the framework's macroscopic rigidity. Using differential phase contrast imaging, we visualize the local coupling of the internal electric field between confined ions and the MFI framework. The combination of our theoretical analysis, which is based on the structure and the charge distribution, demonstrates that the electric field generated by the Ba2+ results in an 8° deformation in the nearby T-O-T bond angles, thereby distorting the 10-MR. The ion-exchange-driven 10-MR flexibility was further experimentally verified by the adsorption and separation of CO2, as this molecular size matches the expanded rings. This work resolves a long-term unsettled issue on the ion-exchange effect of pore size deformation in zeolites, offering insights into electric field-driven framework dynamics and introducing the intrinsic behavior of ions confined in zeolites., This work was supported by the National Key Research and Development Program of China (grant No. 2021YFA1501202), the National Natural Science Foundation of China (grant No. 52572121), and the Guangdong Basic and Applied Basic Research Foundation (grant No. 2024A1515012420). The authors acknowledge the funding by the German Federal Ministry of Research, Technology and Space (BMFTR) and the Ministry of Economic Affairs, Industry, Climate Action and Energy of the State of North Rhine-Westphalia through the project HC-H2. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. ICN2 acknowledges the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (grant No. CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. ER-C Jülich and ICN2 are founding members of e-DREAM. (40), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced oxygen evolution and reduction by phosphorus-doped Co9S8 derived from MOFs: Toward high-performance zinc-air batteries

  • Wang, Xiang
  • Zhou, Min
  • Liao, Xiaobin
  • Han, Xu
  • Xing, Congcong
  • Bes, René
  • Huotari, Simo
  • Arbiol, Jordi
  • Cabot, Andreu
Developing high-performance electrocatalysts for the oxygen evolution (OER) and reduction reactions (ORR) is key to further developing rechargeable zinc-air batteries (ZABs). In this work, we demonstrate phosphorus-doped hollow cobalt pentlandite (P-Co<inf>9</inf>S<inf>8</inf>) nanocubes, derived from ZIF-67, which combine MOF-inherited porosity with phosphorus-induced electronic modulation, as a bifunctional oxygen electrocatalyst. As a cathode catalyst, P-Co<inf>9</inf>S<inf>8</inf> achieves a high power density of 177 mW cm–1, a specific capacity of 775 mAh g<inf>Zn</inf>–1, and remarkable cycling stability over 900 h. Comprehensive experiments and density functional theory show that P doping tunes the local coordination environment, optimizes the d-band center, and lowers reaction energy barriers, enabling fast, durable, and selective oxygen electrocatalysis. This study establishes a generalizable strategy for designing advanced chalcogenide-based electrocatalysts for next-generation energy storage devices., IREC and ICN2 are funded by the CERCA Program / Generalitat de Catalunya (2021SGR00457). This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN / AEI (CEX2021-001214-S). ICN2 is a founding member of e-DREAM. We acknowledge the Helsinki Center for X-ray Spectroscopy for providing experiment time and support with the HelXAS spectrometer under proposal number 2021-0014., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-Step Synthesis of Highly Active and Conductive Transition Metal Nitride for Oxygen Evolution in Alkaline Anion Exchange Membrane Electrolysis

  • Folkman, Scott J.
  • Gelmetti, Ilario
  • Giancola, Stefano
  • Garcés-Pineda, Felipe A.
  • Spadaro, Maria Chiara
  • Muñoz, Andrés Camilo
  • Wickramasinghe, Tharaka
  • Arbiol, Jordi
  • Galán-Mascarós, José Ramón
The kinetic bottleneck of electrocatalytic water splitting is the oxygen evolution reaction (OER). State-of-the-art electrocatalysts for OER include noble metal oxides in acidic electrolytes, as well as non-noble metal oxides in alkaline conditions. Because OER catalyst performance in alkaline anion exchange membrane electrolysis (AEMEL) is limited by the bulk electrical conductivity of the catalyst material, alternatives to metal oxides are desired. This study introduces an efficient single-step synthesis of heterogeneous transition metal nitrides (TMNs) using metal salts in anhydrous NH3, yielding quantitative amounts of the catalyst and volatile byproducts without the necessity for purification steps, while preventing metal-contaminated waste. Extensive characterization of TMNs based on Co, Ni, and Fe demonstratess that such mixed metal nitrides particles with partially oxidized surface outperform benchmark catalysts IrOx and NiCoFeOx in a three-electrode configuration, exhibiting optimum performance for the Co57Ni14Fe29Nx composition. When incorporated onto gas diffusion electrodes in a 5 cm2 AEMEL electrolyzer, Co57Ni14Fe29Nx achieved a cell potential of 2.05 V at 1Acm−2, with sustained stability for more than 240 h of continuous electrolysis. The one-step synthesis of high-performing TMNs marks a pivotal step in sustainable hydrogen production, heralding them as impactful alternatives to metal oxides for bolstering green energy technologies., The authors acknowledge the financial support from MICIU/AEI /10.13039/501100011033 through projects PID2021-124796OB-I00, PID2020-116093RB-C43, PID2023-149158OB-C43 and RED2022-134508-T; and from the Generalitat de Catalunya (2021-SGR-1154 and 2021-SGR00457). ICIQ and ICN2 are supported by the MICIU/AEI /10.13039/501100011033 through the Severo Ochoa Excellence Accreditations CEX2024-001469-S and CEX2021-001214-S; and by the CERCA Programme/Generalitat de Catalunya. S.J.F. acknowledges Marie Skłodowska-Curie Actions grant agreement 895296 (IF- 2019). We acknowledge Matthew Mehmet Crawford from the Fuel Cell Store for many helpful discussions regarding the fabrication of the MEA. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.11) and by the Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (46), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2024-001469-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bringing Order to Chaos in High-Entropy Electrocatalysts

  • Yu, Jing
  • He, Ren
  • Bastús, Neus G.
  • Arbiol, Jordi
  • Cabot, Andreu
High-entropy materials (HEMs) have emerged as a transformative platform for electrocatalysis. Their appeal lies in the vast compositional versatility enabled by the combination of five or more elements, which generates a rich diversity of atomic configurations and surface sites ideally suited for complex multistep reactions. Recent years have witnessed explosive growth in the development of HEMs across diverse material classes and their application to a wide range of electrochemical reactions. Yet significant challenges remain to fully harness their capabilities while managing their intrinsic structural and chemical complexity. Advancing the field requires exploring compositional space, pinpointing reaction sites, and achieving atomic-level control of surface composition and organization. Much remains to be done, calling for breakthroughs in materials design, characterization, and synthesis strategies and technologies. Ultimately, as highlighted here, beyond electrocatalytic applications, HEMs embody a new paradigm in materials discovery, linking precise engineering, correlative multimodal characterization, and high-throughput experimentation and computation., This work was supported by the MAIAMI project (AIA2025- 164488-C21/AIA2025-164488-C22), SYDECAT project (PID2022-136883OB-C22) under MCIN/AEI/10.13039/ 501100011033/FEDER, UE, and by the Departament de Recerca i Universitats of the Generalitat de Catalunya (2021 SGR 01581). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge the InCAEM project of the Advanced Materials program by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/ 10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021−001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crack-Free Precision during Desiccation: Optimizing Aerosol Jet Printing for High-Performance Conductive Microstructure Manufacturing

  • Li, Geng
  • Sun, Yuxin
  • Tian, Yanhong
  • Yu, Jing
  • Mejia-Centeno, Karol V.
  • Khan, Malik Dilshad
  • Wang, Shang
  • Arbiol, Jordi
  • Cabot, Andreu
  • Sun, Qing
Aerosol jet printing (AJP) is a high-resolution additive manufacturing technique that enables the deposition of conductive materials onto diverse substrates. However, a significant challenge in AJP is the occurrence of cracking in printed lines, which undermines both electrical conductivity and structural integrity. Herein, we examine the desiccation-induced cracking mechanism in AJP and introduce optimization strategies to mitigate cracking and enhance the conductivity of printed silver lines. Through a detailed analysis of crack morphology and distribution, key factors such as the deposition thickness and overspray regions are identified. The proposed optimizations, comprising regulation of the deposition thickness, enhancement of resolution, and minimization of overspray, yielded crack-free, high-quality silver lines with superior conductivity. These findings offer crucial insights for the advancement of reliable conductive structures in conformal electronics and microelectronics applications., The authors acknowledge financial support from the National Key R&D Program of China (Grant 2025YFE0125100). Q.S. acknowledges support from the European Union’s Horizon Europe Research and Innovation Programme under the Marie Skłodowska-Curie Grant Agreement No. 101211154. ICN2 acknowledges funding from Generalitat de Catalunya (Grant 2021SGR00457). The authors are thankful for support from Project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033 and by the European Regional Development Fund (ERDF) “A way of making Europe”. ICN2 is supported by the Severo Ochoa programme from the Spanish MCIN/AEI (Grant CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronic structure modulation in Co-doped NiFe-LDH for efficient ethylene glycol oxidation in simulated seawater

  • Ding, Jiaming
  • Li, Tao
  • Ma, Yi
  • Ge, Huan
  • Jian, Ning
  • Tang, Jialing
  • Yu, Jing
  • Arbiol, Jordi
  • Wang, Haiting
  • Li, Luming
  • Cabot, Andreu
  • Li, Junshan
Polyethylene terephthalate (PET) waste presents a major environmental burden, yet it can serve as a feedstock for value-added chemicals. Here, we report cobalt-doped nickel–iron layered double hydroxides (Co/NiFe-LDH) with tunable Co contents, prepared by a one-step solvothermal route, as efficient electrocatalysts for the ethylene glycol oxidation reaction (EGOR) in simulated seawater (SW). Among the series, 0.35Co/NiFe-LDH delivers the highest activity, reaching 87.7 mA cm<sup>−2</sup> at 1.60 V vs. reversible hydrogen electrode (RHE) in simulated SW containing 1 M ethylene glycol (EG), together with a formate faradaic efficiency of 93.8% at 1.60 V. The catalyst also shows strong durability and chloride tolerance, retaining 50.3 mA cm<sup>−2</sup> after 6 h of operation and exhibiting robust Cl<sup>−</sup> resistance. Density functional theory calculations indicate that Co incorporation shifts the d-band center toward the Fermi level, strengthens EG adsorption, and lowers the energy barrier of the rate-determining step of the desorption of HCOOH* intermediate, thereby accelerating EGOR kinetics. Notably, the catalyst performs effectively in PET upcycling scenarios by catalyzing EGOR directly in PET hydrolysis products. This work offers a practical strategy to design high-performance, non-precious-metal EGOR catalysts operable in simulated seawater, supporting sustainable plastic waste valorization while reducing freshwater demand., This research was financially supported by the National Natural Science Foundation of China (Grant No. 22579020), and the Natural Science Foundation of Sichuan province (Grant No. 2023YFG0229). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program. ICN2 is a founding member of e-DREAM [85]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Multifunctional Electrocatalyst for Formate Production with Concurrent Hydrogen Evolution and Electrochemical Hydrogenation of Glucose to Sorbitol

  • Mejia-Centeno, Karol V.
  • Chacón-Borrero, Jesús
  • Xue, Qian
  • Qi, Xueqiang
  • Martí-Sànchez, Sara
  • Llorca, Jordi
  • Cadavid, Doris
  • Khan, Malik Dilshad
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
Electrochemical valorization of biomass-derived glucose offers a promising route for the sustainable coproduction of valuable chemicals and green hydrogen, yet hinges on the development of cost-effective, multifunctional catalysts. Here, we report a noble metal-free core-shell catalyst, Cu@CoFe2O4, that drives both anodic glucose oxidation and cathodic hydrogen evolution or glucose hydrogenation in a single system. In alkaline media (1 M KOH), the catalyst achieves a glucose conversion of 97.5% with a Faradaic efficiency (FE) of 91.2% toward formate at 1.3 V vs RHE, while enabling hydrogen evolution with 100% FE. In a neutral electrolyte (0.1 M Na2SO4), the same electrode facilitates the selective electrochemical reduction of glucose to sorbitol with an FE of 87.5% and 76% conversion at -0.4 V vs RHE. Experimental and computational analyses suggest that the Cu-rich core/CoFe2O4-rich shell-like heterostructure enhances charge transfer and provides complementary active sites, contributing to the observed activity toward both glucose oxidation and hydrogenation pathways. This work highlights a versatile, earth-abundant electrocatalytic platform for biomass conversion and sustainable hydrogen generation., K.V.M.C. acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of Science, Technology, and Innovation of Colombia. P.R.M.A. thanks DGAPA-UNAM (PAPIIT grant IA203526) and SECIHTI (grant 2025-G-1497) for financial support. J.L. is a Serra Húnter Fellow and is grateful to the Academia Excellence Award (Generalitat de Catalunya) and projects MICIN/FEDER PID2024-156765OB-C21 and Maria de Maeztu Units of Excellence Programme CEX2023-001300 M funded by MCIN/AEI 10.13039/501100011033. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021-001214 S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program. ICN2 is a founding member of e-DREAM. (50), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering pore-anchored d-π-d spin channels in carbon fibers for efficient oxygen electrocatalysis in flexible zinc-air batteries

  • Wang, Jiangbo
  • Yu, Jing
  • Wang, Qiannan
  • Li, Hao
  • Ma, Jiachen
  • Li, Canhuang
  • Lu, Jing
  • Hou, Xuebin
  • Arbiol, Jordi
  • Cabot, Andreu
  • Wei, Qufu
Achieving air electrode architectures that simultaneously support spin-state modulation, oxygen diffusion, and high electrical conductivity remains nontrivial. Here, we propose a metal-organic spin-channel engineering strategy by supporting iron phthalocyanine (FePc) on Co nanoparticles (NPs) anchored on porous carbon cloth to construct a binder free FePc-Co/CC air cathode with abundant air-diffusion channels. Thermally induced Co-carbon reconstruction forms gas-transport pathways that enhance oxygen diffusion and stabilize the confined metal-organic interface. At the confined Co-FePc interface, interfacial coupling forms a dipole layer with an electric field of approximately 2 × 1011 V m–1, where the Pc macrocycle acts as an electron bridge, establishing a d-π-d spin channel that disperses C/N p orbitals, raises Fe dxz/dyz orbital level, and accelerates the spin evolution of oxygen species. Concurrently, dynamic bending of the Pc macrocycle fine-tunes Fe-O adsorption, facilitates activation of oxygen intermediates, and promotes electron injection into O-π* antibonding orbitals. As a result, FePc-Co/CC air cathode exhibits a small ORR/OER potential gap (ΔE) of 0.645 V, outperforming typical powder-type commercial catalysts Pt/C+RuO2 (ΔE=0.735 V) and enabling efficient zinc-air batteries. By coupling a d-π-d spin channel with a pore-anchored air electrode, this work introduces an innovative integrated strategy that synchronizes spin-enabled kinetic acceleration with efficient air diffusion and charge transport for flexible energy storage., We acknowledge the High-performance Computing Platform of Peking University. This work was financially supported by the National Natural Science Foundation of China (52473178, 52473275) and Postgraduate Research & Practice Innovation Program of Jiangsu Province (KYCX24_2553). ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 thanks the support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM [50]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nickel and platinum modified exfoliated carbon nitride as photo-thermal catalysts for CO2 hydrogenation

  • Hou, Heting
  • Rana, Adeem Ghaffar
  • Minceva, Mirjana
  • Gil-Sepulcre, Marcos
  • Rüdiger, Olaf
  • DeBeer, Serena
  • Garzón Manjón, Alba
  • Botifoll, Marc
  • Ramasse, Quentin
  • Arbiol, Jordi
  • Romero, Nuria
  • Sala, Xavier
  • García-Antón, Jordi
  • Tasbihi, Minoo
  • Fresno, Fernando
The photocatalytic conversion of carbon dioxide into value-added fuels and chemicals is a promising route to mitigate greenhouse gas emissions while enabling sustainable energy storage. This study investigates the use of catalysts composed of exfoliated graphitic carbon nitride modified with either single-atom Ni sites or Pt nanoparticles for photo-thermal CO2 hydrogenation under combined light irradiation and thermal activation. The photocatalysts have been extensively characterized by different physico-chemical techniques, allowing the study of structure-activity relationships. Both metal-modified catalysts exhibit significantly enhanced CO2 conversion compared to pristine g-C3N4, which is attributed to improved light absorption, reduced charge recombination, and the role of metals as catalytically active sites. However, the catalytic behaviour varies markedly depending on the metal. Pt nanoparticles promote a thermally driven pathway assisted by light, enhancing overall activity and favouring CO formation, whereas Ni single-atom sites preserve the photocatalytic character of the support and shift the selectivity of hydrogenation towards methanol rather than methane primarily obtained over metal-free C3N4. These findings indicate that the combined photonic and thermal energy inputs efficiently activate both CO2 and H2, accelerating reaction kinetics and modifying reaction pathways beyond those achieved in purely thermal or purely photocatalytic systems., MGS, OR and SD thank the Max Planck Society for the funding. MGS acknowledges the support of the HORIZON-MSCA-2021-PF project TRUSol no. 101063820. MGS, OR and SD also acknowledge the CLAESS beamline at the ALBA Synchrotron (proposal no. 2021095409), SAMBA beamline at the SOLEIL (proposal no. 20221353), and beamline staff for support during the XAS measurements. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Program/Generalitat de Catalunya. AGM has received funding from Grant RYC2021-033479-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. ICN2 is founding member of e-DREAM.39 X. S. thanks ICREA for the ICREA Academia Prize 2020. X. S. and J. G. A. acknowledge funding from the Spanish Government (PID2023-146787OB-I00) and AGAUR (2023CLIMA-00011). FF thanks financial support from the Spanish State Agency for Research (AEI, 10.13039/501100011033) of the Ministry of Science, Innovation and Universities within the RICHCO2 project (PID2023-152263OB-I00). SuperSTEM is the UK National Research Facility for Advanced Electron Microscopy, supported by the Engineering and Physical Sciences Research Council (EPSRC) under grant no. EP/W021080/1., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recycled-waste-derived molybdenum carbide nanoparticles obtained by pulsed laser ablation in liquids for hydrogen evolution reaction

  • Iacono, Valentina
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara
  • Priolo, Francesco
  • Ruffino, Francesco
  • Mirabella, Salvo
Transition metal carbides, and Molybdenum-based ones particularly, have been recently reported as valuable alternative to noble expensive materials for alkaline hydrogen evolution reaction (HER). Nonetheless, most reported syntheses for carbides nanostructures rely on primary raw Molybdenum and high temperatures operations in reactive gases environments. Here, we present a sustainable approach for synthesizing Mo carbide nanostructures starting from secondary raw materials from industrial wastes. Pulsed Laser Ablation in Liquid (PLAL) is shown to be an efficient, green and versatile approach for the production of Mo carbide nanostructures, based on the interaction of the pulsed infrared laser light on a homemade, solid pellet of recycled Mo-based powder within a proper organic solvent liquid environment. The robustness of the pellet is studied as a function of different fabrication routes. The obtained MoC and Mo<inf>2</inf>C NPs were loaded on nickel foam and tested for HER in an aqueous 1 M KOH electrolyte, demonstrating a current density of 10 mA cm<sup>−2</sup> at an overpotential of 144 mV. These results have been compared to other recycled transitions metal-based catalysts for HER and highlighted PLAL as versatile technique promoting an efficient reuse of secondary raw materials for efficient electrocatalysts production., European Union (Next Generation, EU) founded this work, through the MUR-PNRR project PRIN IMAGE (No. P2022KACL7). Authors thank the Bio-nanotech Research and Innovation Tower (BRIT) laboratory of the University of Catania (No. PONa3_00136 financed by the MIUR) and Prof. G.G.Condorelli and Dr. Luca Pulvirenti (University of Catania) for XPS measurements at PHI Versa Probe XPS facility. The authors thanks Prof. Jordi Arbiol for access to TEM facility and his support in data analysis. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM. [45], With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin–State Engineering in Mn-Doped Nickel Diselenide Enables Fast and Stable Iodine Redox in Zinc–Iodine Batteries

  • Li, Junshan
  • Yu, Jing
  • Ma, Yi
  • Li, Canhuang
  • Zhang, Yong
  • Zhang, Chao Yue
  • Zhou, Jin Yuan
  • Ren, Yuchuan
  • Li, Luming
  • Arbiol, Jordi
  • Wen, Wei
  • Cabot, Andreu
© 2026 Chinese Chemical Society, Aqueous zinc–iodine batteries are of great potential for large-scale energy storage, yet practical performance is hindered by slow iodine redox kinetics and shuttling of soluble polyiodide intermediates. Here, we show that a manganese-doped nickel diselenide (Mn–NiSe2) cathode additive accelerates iodine redox reactions and stabilizes cycling. Aberration-corrected transmission electron microscopy combined with geometric phase analysis reveals Mn-induced local lattice distortions, while synchrotron X-ray absorption spectroscopy confirms a Mn–Se coordination environment. Density functional theory further indicates that Mn incorporation redistributes electron density at adjacent Ni sites, driving a low-spin to high-spin transition of Ni. The resulting increase in unpaired electrons enhances Ni–I electronic coupling via stronger orbital hybridization with iodine antibonding states, thereby promoting faster iodine redox kinetics. As a result, Mn–NiSe2-based cathodes deliver a Coulombic efficiency up to 99.1% at 0.5 A g−1 and retain a reversible capacity of 110 mAh g−1 after 8000 cycles at 20 A g−1. Notably, stable iodine redox behavior and long-term continuous cycling stability are also achieved in seawater batteries using Mediterranean seawater as the electrolyte, highlighting the robustness of this cathode design., J. Li is grateful to the National Natural Science Foundation of China (grant no. 22579020), Natural Science Foundation of Sichuan province (grant no. 2025ZNSFSC0139), and the China Postdoctoral Science Foundation (grant no. 2024M762752). The authors acknowledge funding from the Generalitat de Catalunya 2021SGR01581, 2021SGR00457, and European Union Next Generation EU/PRTR. The authors also appreciate the use of instrumentation and the technical support provided by the Joint Electron Microscopy Center at ALBA (JEMCA). The authors acknowledge the support of the Supercomputing Center of Lanzhou University, China. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by the Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (grant no. CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Program/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. J.Y. has received funding from the CSC-UAB PhD scholarship program. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund, with the support of the Ministry of Research and Universities, the Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.85 J.Y. Zhou thanks the support from the Supercomputing Center of Lanzhou University., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Waste-to-MoS2 binder-free 2H-MoS2 microflowers for ammonium-ion supercapacitors with operando mechanistic insights

  • Ursino, F.
  • Di Mauro, A.
  • Mineo, Giacometta
  • Pulvirenti, Luca
  • Ariese, F.
  • Ramanan, C.
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
  • Alarcon, C.
  • Salutari, Francesco
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Cabot, Andreu
  • Terrasi, Antonio
  • Mirabella, Salvo
Developing sustainable energy-storage devices is an increasingly urgent challenge, yet the conversion of recycled feedstocks into high-performance, binder-free electrodes operating in environmentally friendly electrolytes remains underexplored. Here, we synthesize MoS<inf>2</inf> nanostructures from Mo-based industrial waste via hydrothermal sulfurization and systematically investigate the effects of precursor-solution pH and hydrothermal temperature on morphology, structure, and electrochemical behaviour. Microscopy and spectroscopy confirm the formation of layered 2H-MoS<inf>2</inf> and show that higher temperature promotes microflower-like architectures and suppresses oxygen-containing residues, consistent with more complete sulfurization. The materials were directly evaluated as binder-free electrodes in 1 M (NH<inf>4</inf>)<inf>2</inf>SO<inf>4</inf>, exhibiting quasi-rectangular voltammograms and surface-dominated charge storage. Increasing the hydrothermal temperature enhances the capacitance by ∼33% at 5 mV s<sup>−1</sup>. By combining microflower-like MoS<inf>2</inf> with a carbon paper substrate, the specific capacitance reaches 1200 F g<sup>−1</sup> at 5 mV s<sup>−1</sup>, with improved rate capability (300 F g<sup>−1</sup> at 10 A g<sup>−1</sup>). A CR2032 proof-of-concept device assembled with a biochar counter electrode delivers 309 F g<sup>−1</sup> at 1 A g<sup>−1</sup> and an energy/power density of 52 Wh kg<sup>−1</sup> at 550 W kg<sup>−1</sup>. Operando X-ray absorption spectroscopy and Raman measurements reveal intermediate structural/chemical changes during cycling, providing insight into the interfacial storage mechanism and degradation pathways. Overall, this work demonstrates a viable route to valorise Mo-based waste into high-performance binder-free MoS<inf>2</inf> electrodes for ammonium-ion supercapacitor devices., Raman, XAS and part of TEM measurements shown in this work were executed as part of proposal 20250330052 in ReMade@ARI project, hence funded by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by UK Research and Innovation (UKRI) under the UK government's Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them. XAS experiments were performed at the ALBA Synchrotron (BL-22 CLÆSS) with the collaboration of ALBA staff as part of experiment 20250330052. The electrochemical measurements were performed thanks to the Italian ministry MUR-PNRR project SAMOTHRACE (ECS00000022) by the European Union (NextGeneration EU). Materials and reagents were purchased through the project “NANOscience for STRatEgic applicatioNs from Green to healTH (NANO STRENGTH)” - Linea di Intervento 1- Progetti di Ricerca Collaborativa del “PIAno di inCEntivi per la RIcerca di Ateneo 2024/2026 Università di Catania. Part of the TEM measurements were funded by the European Union – next Generation EU, Mission 4, Component 2 via the project NanoStore, under the “PRIN PNRR 2022” call, project ID: P20227TNLX, CUP number: I53D23006650001. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. Authors acknowledge support from the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Part of TEM measurements has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM [83]., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Chloroplasts-derived Ni-based electrocatalyst for efficient electrochemical ethanol oxidation to acetate with hydrogen cogeneration

  • Mejia Centeno, Karol V.
  • Alarcon Cabrera, Cristhyan C.
  • Chacón Borrero, Jesús
  • Gong, Li
  • Yang, Linlin
  • Freitas, Fernanda Monteiro
  • Yu, Jing
  • Llorens Rauret, David
  • Garzón Manjón, Alba
  • Carreón Castro, María del Pilar
  • Tarancón Rubio, Albert|||0000-0002-1933-2406
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Arbiol Cobos, Jordi
  • Martinez Alanis, Paulina Raquel
  • Cabot Codina, Andreu
The electrochemical oxidation of biomass-derived organic molecules offers a dual advantage in hydrogen electrolysis: (i) it replaces the sluggish oxygen evolution reaction, accelerating hydrogen generation, reducing cell voltage, and enhancing energy efficiency, and (ii) it valorizes carbon-neutral organic resources into higher-value chemicals. However, the commercial adoption of this strategy relies on the development of electrocatalysts that are cost-effective, energy-efficient, selective, and stable. In this context, biomass not only provides the reactant but also serves as an exceptional resource for creating highly porous and active carbon-based electrocatalysts. In this work, we present a Ni-based electrocatalyst derived from biomass waste, specifically using natural chlorophyll extracted from discarded grape leaves. This catalyst achieves an impressive 86 % Faradaic efficiency for the ethanol oxidation reaction to acetate at 1.5 V, attributed to its large surface area and excellent charge transfer properties. Moreover, it enables 100 % hydrogen production as a co-product at 1.5 V during ethanol oxidation, enhancing its value for energy applications. This study highlights the transformative role of integrating renewable biomass into catalytic systems, demonstrating the potential of biomass-derived materials to drive innovation in electrocatalysis. By converting waste biomass into functional catalysts, this approach advances energy-efficient technologies and addresses environmental challenges of conventional synthesis., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022–136883OB-C22 & PID2023–149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and European Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of Science, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023–042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. AGM has received funding from Grant RYC2021‐033479‐I funded by MCIN/AEI/ 10.13039/501100011033 and by European Union NextGenerationEU/PRTR. JY has received funding from the CSC-UAB PhD scholarship program. D.L.R. acknowledges grant PRE2022–102638. ICN2 is founding member of e-DREAM.83 J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects PID2024-156765OB-C21 and Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI 10.13039/501100011033.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Glucose electrooxidation with simultaneous H2 production on nickel-zinc electrocatalysts derived from an ethylenediamine-functionalized zeolitic imidazole framework

  • Mejia Centeno, Karol V.
  • Montaña Mora, Guillem
  • Chacón Borrero, Jesús
  • Xue, Qian
  • Martí-Sánchez, Sara
  • Berlanga Vázquez, Armando
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Arbiol Cobos, Jordi
  • Qi, Xueqiang
  • Martinez Alanis, Paulina Raquel
  • Cabot, Andreu
The oxidation of biomass-derived compounds such as glucose within electrochemical cells enables both the energy-efficient production of hydrogen and the generation of additional added-value chemicals from biomass. However, for this biomass valorization approach to become commercially viable, selective, cost-effective, and highly active electrooxidation catalysts need to be developed. In this work, we detail the synthesis of a nickel (Ni) and zinc (Zn)-based electrocatalyst for the glucose oxidation reaction (GOR) to formic acid (FoA) via calcination of a Zn-based zeolitic imidazole framework (ZIF) functionalized with ethylenediamine and doped with Ni. The structure, morphology, and electrochemical performance of the catalysts towards the anodic GOR to FoA coupled with the cathodic hydrogen evolution reaction (HER) are subsequently studied. Chronopotentiometry tests with 0.1 M of glucose show a conversion of 94 % at 250 mA in only 70 minutes, with a Faradaic efficiency (FE) of 91 % toward the production of FoA. Meanwhile, at the cathode, the HER FE is close to 98 %., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 & PID2023-149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and Euro pean Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of ence, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023-042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR- C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA gramme / Generalitat de Catalunya. ICN2 is founding member of e- DREAM. [76] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and to projects PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and to the GC 2021 SGR 01061 grant., 7 - Energia Assequible i No Contaminant, 13 - Acció per al Clima
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Mechanochemical synthesis of highly dispersed Cu on CeO2 for the reverse water-gas shift reaction

  • Lu, Xuan
  • Yu, Jing
  • Li, Junshan
  • Serrano Carreño, M. Isabel|||0000-0002-4996-9280
  • Arbiol Cobos, Jordi
  • Cabot, Andreu
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
Copper-based catalysts are highly promising for carbon dioxide (CO2) reduction to carbon monoxide (CO) via the reverse water-gas shift (RWGS) reaction, owing to their efficiency, copper abundance, sustainability and cost-effectiveness. However, enhancing CO2 conversion and CO selectivity requires achieving high copper dispersion through a scalable and economical synthesis method. In this study, Cu was combined with CeO2 rods via a mechanochemical ball-milling approach to optimize performance in the RWGS reaction. Comprehensive characterization and kinetic analysis revealed how metal content influences catalyst architecture and activity. Additionally, in situ diffuse reflectance infrared Fourier transform spectroscopy was used to investigate the nature of copper species at different dispersion levels and elucidate the reaction pathway. Notably, the Cu/CeO2 catalyst with a high Cu loading (~5 wt%) and well-dispersed active sites achieved an activity (RCu(CO2)) of 4.8¿10-5 molCO2 mCu-2 s-1 with over 99% CO selectivity at 450°C. These findings provide a robust strategy for developing high-performance Cu-based catalysts for the RWGS reaction., 13 - Acció per al Clima, 7 - Energia Assequible i No Contaminant
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanochemical synthesis of highly dispersed Cu on CeO2 for the reverse water-gas shift reaction

  • Lu, Xuan
  • Yu, Jing
  • Li, Junshan
  • Serrano Carreño, M. Isabel
  • Arbiol Cobos, Jordi
  • Cabot, Andreu
  • Llorca Piqué, Jordi
Copper-based catalysts are highly promising for carbon dioxide (CO2) reduction to carbon monoxide (CO) via the reverse water-gas shift (RWGS) reaction, owing to their efficiency, copper abundance, sustainability and cost-effectiveness. However, enhancing CO2 conversion and CO selectivity requires achieving high copper dispersion through a scalable and economical synthesis method. In this study, Cu was combined with CeO2 rods via a mechanochemical ball-milling approach to optimize performance in the RWGS reaction. Comprehensive characterization and kinetic analysis revealed how metal content influences catalyst architecture and activity. Additionally, in situ diffuse reflectance infrared Fourier transform spectroscopy was used to investigate the nature of copper species at different dispersion levels and elucidate the reaction pathway. Notably, the Cu/CeO2 catalyst with a high Cu loading (~5 wt%) and well-dispersed active sites achieved an activity (RCu(CO2)) of 4.8¿10-5 molCO2 mCu-2 s-1 with over 99% CO selectivity at 450°C. These findings provide a robust strategy for developing high-performance Cu-based catalysts for the RWGS reaction., 13 - Acció per al Clima, 7 - Energia Assequible i No Contaminant, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Glucose electrooxidation with simultaneous H2 production on nickel-zinc electrocatalysts derived from an ethylenediamine-functionalized zeolitic imidazole framework

  • Mejia Centeno, Karol V.
  • Montaña Mora, Guillem
  • Chacón Borrero, Jesús
  • Xue, Qian
  • Martí-Sánchez, Sara
  • Berlanga Vázquez, Armando
  • Llorca Piqué, Jordi
  • Arbiol Cobos, Jordi
  • Qi, Xueqiang
  • Martinez Alanis, Paulina Raquel
  • Cabot, Andreu
The oxidation of biomass-derived compounds such as glucose within electrochemical cells enables both the energy-efficient production of hydrogen and the generation of additional added-value chemicals from biomass. However, for this biomass valorization approach to become commercially viable, selective, cost-effective, and highly active electrooxidation catalysts need to be developed. In this work, we detail the synthesis of a nickel (Ni) and zinc (Zn)-based electrocatalyst for the glucose oxidation reaction (GOR) to formic acid (FoA) via calcination of a Zn-based zeolitic imidazole framework (ZIF) functionalized with ethylenediamine and doped with Ni. The structure, morphology, and electrochemical performance of the catalysts towards the anodic GOR to FoA coupled with the cathodic hydrogen evolution reaction (HER) are subsequently studied. Chronopotentiometry tests with 0.1 M of glucose show a conversion of 94 % at 250 mA in only 70 minutes, with a Faradaic efficiency (FE) of 91 % toward the production of FoA. Meanwhile, at the cathode, the HER FE is close to 98 %., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 & PID2023-149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and Euro pean Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of ence, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023-042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR- C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA gramme / Generalitat de Catalunya. ICN2 is founding member of e- DREAM. [76] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and to projects PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and to the GC 2021 SGR 01061 grant., 7 - Energia Assequible i No Contaminant, 13 - Acció per al Clima, Postprint (published version)