Pasar al contenido principal

Development of materials and devices for chemical energy storage through electrocatalytic routes

RYC2022-036510-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic bed configuration on the valorization of greenhouse gases by DBD plasma-catalysis

  • García Villalva, Rolando
  • Biset-Peiró, Martí
  • Alarcón, Andreina
  • Murcia-López, Sebastián
  • Guilera, Jordi
Reactor design plays a crucial role in DBD plasma-catalysis performance, but the influence of catalyst particle size and bed configuration has remained largely unexplored. This study systematically investigates their impact across three key reactions on the valorization of greenhouse gases (CO<inf>2</inf> and CH<inf>4</inf>) into valuable products: steam methane reforming, dry methane reforming, and Sabatier reaction. Plasma-catalytic tests (20–60 W) using Ni/Al<inf>2</inf>O<inf>3</inf> as catalyst demonstrated that dense bed configurations consistently outperformed distributed ones across all reactions. In that sense, temperature profiles varied, with dense beds exhibiting higher temperatures, aligning with improved catalytic performance. While temperature contributes to plasma-catalysis activity, it is not the only determining factor. Electrical characterization revealed that distributed bed configuration along the plasma region increased system capacitance and effective dielectric response, negatively impacting micro-discharge stability and reaction efficiency. In dense bed configuration, micro-catalysts (500 μm) exhibited superior CH<inf>4</inf> conversion, whereas catalyst in powder form (50 μm) exhibited higher activity in CO<inf>2</inf> conversion. Optical emission spectroscopy (OES) revealed the presence of plasma-generated radicals and demonstrated differences between bed configurations, with dense beds favoring reforming-related species. Comparable spectra at different heights suggest that these radicals may reach the catalyst surface without significant quenching. Catalytic activity and characterization correlation indicated that CH<inf>4</inf> activation mainly occurs through interactions with plasma species in the gas phase, which are favored by the interparticle gaps present in micro-catalyst packed-bed configurations. In contrast, CO<inf>2</inf> conversion relies more on catalyst surface interactions, which are enhanced when the catalyst is more compactly arranged, as in powder beds. These findings highlight the significance of reactor design parameters and provide general guidelines for optimizing plasma-catalysis systems., This work was supported by project PID2023-151777OB-I00, funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. Moreover, R.G.-V. acknowledges the Joan Oró Predoctoral Fellowship program from the Department of Research and Universities of the Generalitat of Catalonia, cofinanced by the European Social Fund Plus (2024 FI-1 00410), and gratefully thanks Diana Bajaña-Cedeño for her support in the visual design. S.M.L gratefully acknowledges grant RYC2022-036510-I funded by MICIU/AEI/10.13039/501100011033 and by ESF+. A.A. acknowledges project REPLAY (CNS2022-135235). Authors kindly thank Dr. Albert Llorente and Dr. Viktoria Golovanova for their assistance in the characterization of materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-Electrode Tandem Electrocatalysis with Dual TiO2@Cu and Cu Surfaces Enables Energy-Efficient Ammonia Production from Nitrate

  • Chávez, Marcelo E.
  • Khairani, Inna Y.
  • Biset-Peiró, Martí
  • Martí-Sànchez, Sara
  • Villa, Katherine
  • Arbiol, Jordi
  • Morante, Joan Ramón
  • Gökce, Bilal
  • Murcia-López, Sebastián
Electrochemical ammonia synthesis from nitrate can complement a hydrogen-based energy system with a liquid, shippable energy carrier. Ammonia (NH3) is attractive because it serves both as an energy vector and as an essential feedstock. However, nitrate reduction is an eight-electron, proton-coupled pathway that forms multiple intermediates; the NO3– → NO2– step is widely viewed as rate-determining, followed by nitrite reduction and hydrogenation steps, until the formation of NH3. Here, we implement a tandem strategy in a flow cell using a double-sided electrode with Cu and TiO2@Cu surfaces that cooperatively boost the NO3– → NO2– and NO2– → NH3 conversions. The system achieves a Faradaic efficiency toward NH3 of 97%, with an NH3 selectivity of 80%, and a productivity of 7.7 mg h–1 cm–2 (0.45 mmol h–1 cm–2), corresponding to a full-cell energy efficiency of 29%. This integrated electrode–reactor design expands the accessible performance space for the NO3RR by combining nitrate adsorption with selective nitrite hydrogenation. These results establish a practical route for the efficient electrochemical synthesis of NH3 from nitrate., IREC and UW acknowledge financial support from the LESGO project (Code: 952068. H2020-EU.1.2.2. funded). IREC thanks Generalitat de Catalunya for financial support through the CERCA Program and M2E (2021_SGR01581). IREC also acknowledges support from the European Regional Development Funds (ERDF, FEDER) and by MCIN/AEI/10.13039/501100011033 CERES project (PID2020 116093RB-C42). M.E.C. acknowledges the Formacion Profesional de Investigadores Program (PRE2018-083575). S.M.L gratefully acknowledges grant RYC2022-036510-I funded by MICIU/AEI/10.13039/501100011033 and by ESF+. ICN2 is funded by the CERCA Program/Generalitat de Catalunya. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors acknowledge the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). ICN2 is a founding member of e-DREAM. (62) Authors kindly thank Dr. Georgiana Stoica for her assistance in the EPR characterization., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed