Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing|||0000-0002-7620-745X
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto-Huguet, Ivan
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Lu, Xuan|||0000-0003-2453-2805
  • Gupta, Kapil|||0000-0002-4826-6620
  • Botifoll, Marc|||0000-0002-4876-6393
  • Simonelli, Laura|||0000-0001-5331-0633
  • Fauth, François|||0000-0001-9465-3106
  • Zhou, Jin Yuan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Lu, Yan|||0000-0003-3055-0073
  • Zhang, Chao Yue
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly LiS nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid LiS nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Mechanistic Insights and Technical Challenges in Sulfur-Based Batteries, A Comprehensive In Situ/Operando Monitoring Toolbox

  • Yu, Jing|||0000-0002-7620-745X
  • Pinto-Huguet, Ivan
  • Zhang, Chao Yue
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Xu, Yaolin|||0000-0002-2658-3852
  • Vizintin, Alen|||0000-0003-1876-1396
  • Velasco-Vélez, Juan-Jesús|||0000-0002-6595-0168
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Pan, Xiaobo|||0000-0002-5757-2339
  • Oney, Gozde
  • Olgo, Annabel
  • Märker, Katharina|||0000-0002-5056-7174
  • M. Da Silva, Leonardo
  • Luo, Yufeng
  • Lu, Yan|||0000-0003-3055-0073
  • Huang, Chen
  • Härk, Eneli|||0000-0001-5758-8106
  • Fleming, Joe
  • Chenevier, Pascale|||0000-0003-4358-2162
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Bai, Yunfei
  • Botifoll, Marc|||0000-0002-4876-6393
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • An, Qi
  • Amietszajew, Tazdin|||0000-0001-7452-1034
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Batteries based on sulfur cathodes offer a promising energy storage solution due to their potential for high performance, cost-effectiveness, and sustainability. However, commercial viability is challenged by issues such as polysulfide migration, volume changes, uneven phase nucleation, limited ion transport, and sluggish sulfur redox kinetics. Addressing these challenges requires insights into the structural, morphological, and chemical evolution of phases, the associated volume changes and internal stresses, and ion and polysulfide diffusion within the battery. Such insights can only be obtained through real-time reaction monitoring within the battery's operational environment, supported by molecular dynamics simulations and advanced artificial intelligence-driven data analysis. This review provides an overview of in situ/operando techniques for real-time tracking of these processes in sulfur-based batteries and explores the integration of simulations with experimental data to provide a holistic understanding of the critical challenges, enabling advancements in their development and commercial adoption.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic Insights and Technical Challenges in Sulfur-Based Batteries: A Comprehensive In Situ/Operando Monitoring Toolbox

  • Yu, Jing
  • Pinto, Iván
  • Zhang, Chao Yue
  • Zhou, Yingtang
  • Xu, Yaolin
  • Vizintin, Alen
  • Velasco-Vélez, Juan-Jesús
  • Qi, Xueqiang
  • Pan, Xiaobo
  • Oney, Gozde
  • Olgo, Annabel
  • Märker, Katharina
  • Silva, Leonardo M. da
  • Luo, Yufeng
  • Lu, Yan
  • Huang, Chen
  • Härk, Eneli
  • Fleming, Joe
  • Chenevier, Pascale
  • Cabot, Andreu
  • Bai, Yunfei
  • Botifoll, Marc
  • Black, Ashley P.
  • An, Qi
  • Amietszajew, Tazdin
  • Arbiol, Jordi
Batteries based on sulfur cathodes offer a promising energy storage solution due to their potential for high performance, cost-effectiveness, and sustainability. However, commercial viability is challenged by issues such as polysulfide migration, volume changes, uneven phase nucleation, limited ion transport, and sluggish sulfur redox kinetics. Addressing these challenges requires insights into the structural, morphological, and chemical evolution of phases, the associated volume changes and internal stresses, and ion and polysulfide diffusion within the battery. Such insights can only be obtained through real-time reaction monitoring within the battery's operational environment, supported by molecular dynamics simulations and advanced artificial intelligence-driven data analysis. This review provides an overview of in situ/operando techniques for real-time tracking of these processes in sulfur-based batteries and explores the integration of simulations with experimental data to provide a holistic understanding of the critical challenges, enabling advancements in their development and commercial adoption., ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. ICN2 is founding member of e-DREAM. J.Y. and C.H. thank the China Scholarship Council for the financial support. A.V. thanks financial support from the Slovenian Research and Innovation Agency (ARIS) under research core program P2-0423. J.Y. and A.C. acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, the Generalitat de Catalunya 2021SGR01581 and European Union NextGenerationEU/PRTR. P.C. acknowledges support from the 2BoSS project of the ERA-MIN3 program with the French grant number ANR-22-MIN3-0003-01 from Agence Nationale de la Recherche. C.Y.Z. acknowledge the support by the Supercomputing Center of Lanzhou University, China. We acknowledge financial support from the European Union (Grant agreement No. 101104006 ─ HEALING BAT ─ HORIZON-CL5-2022-D2-01)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing
  • Usoltsev, Oleg
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto, Iván
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi
  • Lu, Xuan
  • Gupta, Kapil
  • Botifoll, Marc
  • Simonelli, Laura
  • Fauth, François
  • Zhou, Jin Yuan
  • Llorca, Jordi
  • Lu, Yan
  • Zhang, Chao Yue
  • Arbiol, Jordi
  • Cabot, Andreu
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly Li2S nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid Li2S nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications., IREC and HZB acknowledge financial support from the European Union (Grant agreement No. 101104006 ─ HEALINGBAT ─ HORIZON-CL5-2022-D2-01). J.Y. and C.H. thank the China Scholarship Council for the financial support. C.Y.Z. and J.Z. acknowledge the support of the Supercomputing Center of Lanzhou University, China. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. I.M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101081337. XAS experiments were performed at the beamline-22-CLÆSS (Proposal Number: 2024068488),[50] and operando XRD was performed in beamline BL04-MSPD (Grant Number: 2023097750) at ALBA Synchrotron, Spain. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). IREC acknowledges funding from Generalitat de Catalunya 2021SGR01581, the European Union NextGenerationEU/PRTR, the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, and the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). J.L. is a Serra Húnter Fellow and is grateful to projects MICIN/FEDER PID2024-156765OB-C21 and CEX2023-001300-M (MCIN/AEI 10.13039/501100011033). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work was performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.[51], With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Electrochemical Nucleation and Growth in Battery Electrodes under Reactant-Limited Conditions

  • Yu, Jing
  • Martynova, Irina
  • Li, Zeyan
  • Li, Canhuang
  • Zhang, Chaoqi
  • Sun, Qing
  • Arbiol, Jordi
  • Cabot, Andreu
Nucleation and growth of solid phases from species dissolved in an electrolyte govern battery performance, defining capacity, efficiency, rate capability, stability, and safety. However, classical nucleation-growth models often do not realistically describe working cells, failing to capture highly asymmetric out-of-plane growth and finite reactant supply. Here, we introduce a nucleation-growth model to fit potentiostatic nucleation transients that explicitly accounts for a finite amount of reactant and its depletion, reproducing the characteristic current rise upon nucleation, peak, and subsequent decay without ad hoc corrections. Both instantaneous nucleation and progressive nucleation are considered. The model is applied to the nucleation and growth of Li2S at a catalyzed electrode from a lithium polysulfide solution, yielding nucleus densities of up to 6.7 × 109 cm-2 and an effective reaction rate constant of 1.8 × 10-3 s-1. Beyond Li-S batteries, the framework can be extended to other conversion and metal-deposition chemistries in which finite-supply effects dominate., IREC acknowledges funding from CERCA Programme/Generalitat de Catalunya, Generalitat de Catalunya 2021SGR01581, SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22), and European Union NextGenerationEU/PRTR. This work was partially funded by the European Union (Grant Agreement 101104006 - HEALING BAT - HORIZON-CL5-2022-D2-01). Views and opinions expressed are, however, those of the authors only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. I. M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101081337. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors acknowledge support from the Advanced Materials programme by the Spanish Government with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors are thankful for the support from project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science Ph.D. program. J.Y. has received funding from the CSC-UAB Ph.D. scholarship program. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM. (17), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards circular batteries: A water-soluble, recyclable, self-healing binder for aqueous-processed sulfur cathodes

  • Ren, Yuchuan
  • Xue, Qian
  • Lu, Liqiang
  • Li, Canhuang
  • Li, Guanjie
  • Kardjilov, Nikolay
  • Manke, Ingo
  • Zhao, Jiaqi
  • Lu, Xuan
  • Yu, Jing
  • Zeng, Guifang
  • Bi, Xiaoyu
  • Zhang, Shengnan
  • Berlanga, Armando
  • Huang, Chen
  • Qi, Xuede
  • Qi, Xueqiang
  • Arbiol, Jordi
  • Lu, Yan
  • Tan, Guoqiang
  • Guo, Zaiping
  • Cabot, Andreu
Sulfur cathodes have attracted considerable attention due to their potential for high energy density and cost-effectiveness. However, their limited stability, in part stemming from volume changes during cycling and the dissolution and migration of metal polysulfides, has hindered their commercialization. Binders play a critical role in preventing electrode delamination, while potentially contributing additional functionalities, such as trapping polysulfides. In this work, we introduce an aqueous-processable sulfur cathode binder composed of polyvinyl alcohol (PVA) and polyethylene glycol (PEG). Multiple hydrogen bonding interactions provided by the PVA/PEG binder hydrogen-bond network enhance metal-ion diffusion and trap polysulfides, thereby reducing their dissolution. Additionally, microcracks generated during the cycling can be healed by the dynamic hydrogen-bond network. Thereby, in lithium-sulfur cells, PVA/PEG-based cathodes exhibit an ultralow per-cycle capacity fade of 0.0023% over 600 cycles at 1C, and deliver up to 677 mAh/g in lean-electrolyte pouch cells (E/S = 4 µL/mg), retaining 99% of the initial capacity after 100 cycles at 0.1C in pouch cell. Theoretical calculations and molecular dynamics simulations confirm the superior adsorption energy and repairability of the PVA/PEG binder, reinforcing its ability to stabilize the cathode. Additionally, PVA/PEG-based cathodes exhibit excellent flame retardancy, support eco-friendly and closed-loop recycling due to the binder’s water solubility, which allows for easy electrode material reutilization., This work was partially funded by the European Union (Grant agreement No. 101104006 — HEALING BAT — HORIZON-CL5-2022-D2-01). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or CINEA. Neither the European Union nor the granting authority can be held responsible for them. The authors acknowledge support from the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033 and from the Generalitat de Catalunya 2021SGR01581 and 2021SGR00457 and European Union Next Generation EU/PRTR. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. YC.R., Q.X. and LQ.L did the same contribution for this work. YC. R., Q.X., CH. L., X.L., J.Y., GF.Z., XY.B., C.H., thank for the China Scholarship Council for the scholarship support., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfur cathodes for next-generation batteries

  • Manzini, Alessandra
  • Martynova, Irina
  • Yu, Jing
  • Bi, Xiaoyu
  • Jacas Biendicho, Jordi
  • Arbiol, Jordi
  • Sun, Qing
  • Zhang, Chaoqi
  • Cabot, Andreu
The global transition toward efficient, sustainable, and cost-effective energy storage is accelerating, driven by efforts to decarbonize key sectors. Among emerging technologies, sulfur-based conversion cathodes have garnered significant attention as promising candidates for next-generation batteries due to their exceptional theoretical energy density, low cost, and material abundance. Their successful deployment could advance critical applications, including electric mobility, renewable energy integration, and grid stabilization. Despite this potential, sulfur cathodes face persistent limitations that have prevented commercialization. Unlike reviews focusing primarily on materials innovations in idealized settings, this work provides a critical, user-focused assessment that prioritizes challenges of scalable manufacturing and operation under practical conditions. We analyze fundamental failure mechanisms under realistic parameters, including high sulfur loading, lean electrolyte, and limited lithium anode excess, that cause performance to diverge dramatically from target metrics. By synthesizing recent advancements in mechanistic understanding, host design, and interface engineering, we identify key bottlenecks hindering large-scale production. The review concludes with strategic pathways spanning materials design, device architecture, and market integration to bridge the gap between laboratory research and real-world application., IREC acknowledges financial support from the European Union (Grant agreement No. 101104006 - HEALINGBAT - HORIZON-CL5-2022-D2-01). IREC acknowledges funding from Generalitat de Catalunya 2021SGR01581, the European Union NextGenerationEU/PRTR, the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, and the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). I. M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101081337. J.Y. thanks the China Scholarship Council for the financial support. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from the Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM217. Co-funded by the European Union. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Executive Agency. Neither the European Union nor the granting authority can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed