Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced lithium polysulfide adsorption and reaction with cobalt-doped spinel additives for robust lithium-sulfur batteries

  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Qi, Xuede|||0009-0008-5723-3629
  • Zhang, Xuesong|||0000-0001-6685-3602
  • Berlanga-Vázquez, Armando|||0009-0003-4114-1491
  • Chang, Xingqi|||0000-0002-2604-0233
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Guardia, Pablo|||0000-0001-9076-4642
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Zhang, Chao Yue
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur-based cathodes offer a promising high-energy-density alternative to conventional lithium-ion batteries. However, their commercial viability is hindered by limited stability due to the gradual loss of active sulfur during cycling. This study addresses this challenge by introducing a cobalt-doped spinel oxide as a catalytic additive, designed to enhance the performance and stability of sulfur cathodes with minimized cobalt usage. Small amounts of cobalt doping improve the adsorption of sulfur species through stronger electronic interactions with antibonding orbitals and accelerate charge transfer, thereby promoting more efficient sulfur redox reactions. Cobalt also lowers the energy barrier for LiS formation, a critical step in the cycling process. Specifically, Co-doped MnFeO with 2.4 wt % Co demonstrates a remarkable initial capacity of 1302 mAh/g at 0.1C, excellent rate capability with 700 mAh/g at 4C, and stable cycling performance with an average capacity decay of just 0.03 % per cycle at 0.5C over 200 cycles. Overall, this work underscores the potential of cobalt-doped spinel structures as catalytic additives to mitigate the limitations of sulfur cathodes, paving the way for more stable and high-performance lithium-sulfur batteries.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing|||0000-0002-7620-745X
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto-Huguet, Ivan
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Lu, Xuan|||0000-0003-2453-2805
  • Gupta, Kapil|||0000-0002-4826-6620
  • Botifoll, Marc|||0000-0002-4876-6393
  • Simonelli, Laura|||0000-0001-5331-0633
  • Fauth, François|||0000-0001-9465-3106
  • Zhou, Jin Yuan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Lu, Yan|||0000-0003-3055-0073
  • Zhang, Chao Yue
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly LiS nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid LiS nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ligand-Mediated Tailoring of Self-Supported MnxOy@Ni(OH)2Nanoheterostructures with Enhanced OER Performance

  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Zhang, Xuesong|||0000-0001-6685-3602
  • Lu, Xuan|||0000-0003-2453-2805
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Xue, Qian
  • Berlanga-Vázquez, Armando|||0009-0003-4114-1491
  • Llorca, Jordi|||0000-0002-7447-9582
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Guardia, Pablo|||0000-0001-9076-4642
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We report a colloidal synthesis strategy for producing MnO@Ni(OH)nanoheterostructures under mild conditions, i.e., low temperature and ambient pressure. The role of carboxylic acid ligands in directing the synthesis is systematically explored, revealing that lower ligand concentrations along with low-molecular weight molecules favor the formation of well-defined MnO@Ni(OH)heterostructures. Electrochemical characterization demonstrates that the resulting nanocomposites exhibit significantly enhanced electrochemical surface area and oxygen evolution reaction (OER) activity compared to their single-component counterparts. Specifically, MnO@Ni(OH)achieves a low overpotential of 299 mV at 10 mA cm, a Tafel slope of 61 mV dec, and a low charge transfer resistance of 9 Ω. The improved OER performance is attributed to the synergistic effect between the Ni(OH)nanosheets, which facilitate *OOH intermediate formation, and the MnOcomponent, known for its intrinsic catalytic activity. Additionally, MnOserves as a stabilizing phase and precursor to MnO, contributing to the overall durability and structural integrity of the catalyst.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Pilot-scale closed-loop diffusion dialysis unit for the desalination and purification of biosurfactants in corn steep water: from cellulose tubing to flat-sheet membranes

  • Martinez Arcos, Andrea
  • Reig, M.
  • Cruz Freire, José Manuel
  • Cortina, J.L.
  • Pérez Cid, Benita
  • Moldes Menduiña, Ana Belén
  • Vecino Bello, Xanel
Corn steep water (CSW) is a biosurfactant (BS)-rich agro-industrial stream whose valorization requires sustainable downstream strategies capable of removing salts and low molecular weight impurities while preserving its surface-active compounds. Previous work demonstrated the suitability of regenerated cellulose (RC) diffusion dialysis (DD) tubing membranes for the lab-scale purification and desalination of CSW, identifying 6–8 kDa RC membranes operated at 4 ◦C as the most suitable configuration. However, the transition from tubing to scalable membrane modules remains a critical step towards industrial implementation. In this study, the DD process advanced from lab-scale RC tubing to a pilot-scale closed-loop unit based on flat-sheet RC membranes. The DD unit provided a total effective membrane area of 929 cm2 , representing a 10.5-fold increase compared with the previous tubing system. The effects of CSW source, operating temperature, water volumen and flow rate and CSW pH were evaluated in terms of conductivity reduction, desalination efficiency (e.g. organic acid removal) and preservation of surfactant activity. The best performance was obtained at 4 ◦C using 1.5 L of CSW adjusted to pH 6.5 and circulated at 0.56 L/h⋅m2 , with 4.5 L of Milli-Q water circulated counter-currently at 1.12 L/h⋅m2 . After 72 h of operation, removal efficiencies of 75%, 66% and 53% were achieved for lactic, acetic and phytic acids, respectively. Although the pilot-scale DD unit showed lower removal efficiencies for most diffusible compounds than the previous DD tubing configuration, primarily due to the lower water/CSW ratio and the absence of water replacement, the functional properties of the BS-rich stream were preserved. The purified CSW extract maintained a minimum surface tension close to 55 mN/m and a critical micelle concentration of 0.12 g/L. The successful operation of the closed-loop flat-sheet membrane DD unit with real CSW under pilot-scale conditions supports the classification of the process at TRL (Technology Readiness Level) 5, as the technology was validated in a relevant environment while preserving the surfactant functionality of the purified CSW stream., Xunta de Galicia | Ref. ED431F 2023/17, Universidade de Vigo | Ref. PREUVIGO-21, Agencia Estatal de Investigación | Ref. RYC2021-030966-I, Agencia Estatal de Investigación | Ref. CEX2023-001300-M, Generalitat de Catalunya | ICREA Academia
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Giant Photocaloric Effects across a Vast Temperature Range in Ferroelectric Perovskites

  • Rurali, Riccardo
  • Escorihuela Sayalero, Carlos
  • Tamarit, Josep Lluís
  • Íñiguez, Jorge
  • Cazorla, Claudio
Solid-state cooling presents an energy-efficient and environmentally friendly alternative to traditional refrigeration technologies that rely on thermodynamic cycles involving greenhouse gases. However, conventional caloric effects face several challenges that impede their practical application in refrigeration devices. First, operational temperature conditions must align closely with zero-field phase-transition points; otherwise, the required driving fields become excessively large. However, phase transitions occur infrequently near room temperature. Additionally, caloric effects typically exhibit strong temperature dependence and are sizable only within relatively narrow temperature ranges. In this Letter, we employ first-principles simulation methods to demonstrate that light-driven phase transitions in polar oxide perovskites have the potential to overcome such limitations. Specifically, for the prototypical ferroelectric KNbO_{3} we illustrate the existence of giant "photocaloric" effects induced by light absorption (ΔS_{PC}∼100  J K^{-1} kg^{-1} and ΔT_{PC}∼10  K) across a vast temperature range of several hundred Kelvin, encompassing room temperature. These findings are expected to be generalizable to other materials exhibiting similar polar behavior., We acknowledge financial support by the Spanish Ministry of Science under the Grants No. PID2020–119777 GB-I00, No. TED2021-130265BC22, No. PID2020–112975 GB-I00, No. RYC2018024947-I and by the Generalitat de Catalunya under the Grants No. 2021SGR-00343 and No. 2021SGR-01519. This work is part of the Severo Ochoa Excellence Programme (CEX2023-001263-S). Computational support was provided by the Red Española de Supercomputación under the Grants No. FI-2023-2-0004, No. FI-2023-30043, and No. FI-2024-1-0005. This work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI/10.13039/ 501100011033. Work at LIST was supported by the Luxembourg National Research Fund through Grant No. C21/MS/15799044/FERRODYNAMICS., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced lithium polysulfide adsorption and reaction with cobalt-doped spinel additives for robust lithium-sulfur batteries

  • Chacón-Borrero, Jesús
  • Qi, Xuede
  • Zhang, Xuesong
  • Berlanga, Armando
  • Chang, Xingqi
  • Montaña-Mora, Guillem
  • Mejia-Centeno, Karol V.
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Llorca, Jordi
  • Guardia, Pablo
  • Qi, Xueqiang
  • Zhang, Chao Yue
  • Cabot, Andreu
Sulfur-based cathodes offer a promising high-energy-density alternative to conventional lithium-ion batteries. However, their commercial viability is hindered by limited stability due to the gradual loss of active sulfur during cycling. This study addresses this challenge by introducing a cobalt-doped spinel oxide as a catalytic additive, designed to enhance the performance and stability of sulfur cathodes with minimized cobalt usage. Small amounts of cobalt doping improve the adsorption of sulfur species through stronger electronic interactions with antibonding orbitals and accelerate charge transfer, thereby promoting more efficient sulfur redox reactions. Cobalt also lowers the energy barrier for Li2S formation, a critical step in the cycling process. Specifically, Co-doped MnFe2O4 with 2.4 wt % Co demonstrates a remarkable initial capacity of 1302 mAh/g at 0.1C, excellent rate capability with 700 mAh/g at 4C, and stable cycling performance with an average capacity decay of just 0.03 % per cycle at 0.5C over 200 cycles. Overall, this work underscores the potential of cobalt-doped spinel structures as catalytic additives to mitigate the limitations of sulfur cathodes, paving the way for more stable and high-performance lithium-sulfur batteries., This work was supported by the project SyDEC at (PID2022-136883OB-C22), financed by the Spanish MCIN/AEI, the National Natural Science Foundation of China (52272054, 52125105, 52061160484, 51972329), Natural Science Foundation of Guangdong Province (2019TX05L389, 2022A1515011365, 2024A1515011670), Shenzhen Science and Technology Planning Project (GJHZ20220913142809019, JCYJ20200109115624923), the Foundation of the National Research Council of Thailand (N42A650253), and the NSRF via the Program Management Unit for Human Resources & Institutional Development, Research and Innovation (B50G670108). Thanks to the China Scholarship Council (CSC) for the scholarship support. This study is part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Program / Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is a founding member of e-DREAM [60]. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and funding from GC 2021 SGR 01061 and projects MICIN/AEI/FEDER PID2021–124572OB-C31 and MCIN/AEI CEX2023–001300-M. C.Y. Z. acknowledge the support of the Supercomputing Center of Lanzhou University, China., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023–001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt-zirconia coated monoliths fabricated by direct ink writing for catalytic applications

  • Razavi, Seyed Ali
  • Fargas, Gemma
  • Serrano, Isabel
  • Laguna-Bercero, M. A.
  • Llanes, Luis
  • Llorca, Jordi
  • Morales, Miguel
Direct Ink Writing (DIW) is a promising technique for fabricating ceramic catalysts with complex geometries and enhanced catalytic performances, but these still require overcoming some challenges to maximize their catalytic and mechanical functionality. In this work, DIW yttria-doped zirconia (YDZ) catalysts were coated with a Co/YDZ catalyst layer. Two configurations based on a dense monolith and a porous one sintered at 1450ºC and 1300ºC were fabricated through DIW, using optimal rheological hydrogel-inks, to investigate the effect of porosity on the mechanical and catalytic performance in the ethanol steam reforming reaction. The monolith sintered at 1450°C achieved the best mechanical and catalytic performance, as it presented the highest Co concentration (2.3 at%) at the catalyst layer. In addition, this monolith exhibited excellent mechanical properties at the interface between contiguous filaments in the multilayer structure. Therefore, this simple approach is a promising method to produce enhanced catalytically and mechanically robust monoliths., The research reported in this paper received support from the EU Regional Development Fund through the Operational FEDER of Catalonia 2014–2020 RIS3CAT-BASE3D, from projects PID2021–126614OB-I00, PID2021–124572OB-C31, PID2022–137274NB-C32, PID2022–137626OB-C31, and CEX2023–001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER. This research was also supported by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+). Additional funding was also received from AGAUR (Agency for Administration of University and Research) under grant number 2021 SGR 01053 and 01061, and from T02–20R (DGA). S.A.R. acknowledges the Ph.D. scholarship received from Universitat Politècnica de Catalunya and Banco Santander (Predoctoral grant 2020 FPU-UPC_068). J.Ll. is Serra Hunter Fellow and is grateful to ICREA Academia program (Generalitat de Catalunya). M.M. is Serra Hunter Fellow. Furthermore, the use of Servicio General de Apoyo a la Investigación (SAI, University of Zaragoza) and the Advanced Microscopy Laboratory (LMA) are also acknowledged. The authors also thank Casimir Casas, Oscar Escuer and Marc Torrente for their assistance during this research., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001300-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Ink Writing of cobalt-zirconia monoliths for catalytic applications: A novel single-step fabrication approach

  • Razavi, Seyed Ali
  • Fargas, Gemma
  • Vilella, Tània
  • Serrano, Isabel
  • Laguna-Bercero, M. A.
  • Llanes, Luis
  • Rodríguez, Daniel
  • Ginebra, Maria-Pau
  • Llorca, Jordi
  • Morales, Miguel
Additive manufacturing technologies are revolutionizing the fabrication of ceramic catalysts through hierarchical design to enhance catalytic performance and simultaneously improving the efficiency of the manufacturing process by decreasing the initial investment and production steps. This work proposes a fabrication process of cobalt-zirconia monoliths based on Direct-Ink Writing of Co-enriched hydrogel-based ceramic inks, and the debinding and sintering at 600ºC in a single thermal treatment. The effect of Co precursor amount (3.0 −7.0 wt% Co) on the rheological properties of inks and the catalytic performance in ethanol steam reforming is investigated. The results reveal the successful incorporation of Co into rectilinear monoliths with 50 % infill, obtaining strongly Co-rich surfaces. The remarkable catalytic performance of the 5.0 wt% Co monolith at 300–600ºC confirms the feasibility of this novel single-step approach, reaching an appropriate balance between catalytic activity and printability. This outcome may represent a push towards the fabrication of fully 3D-printed monolithic catalysts., The research reported in this paper received support from the EU Regional Development Fund through the Operational FEDER of Catalonia 2014–2020 RIS3CAT-BASE3D, from projects PID2021–124572OB-C31, PID2021–125150OB-I00, PID2021–126614OB-I00, PID2022–137274NB-C32, and PID2022–137626OB-C31 funded by MCIN/AEI/10.13039/501100011033, EU and FEDER. This work was part of Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI/10.13039/501100011033. This research was also supported by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+). Additional funding was also received from AGAUR (Agency for Administration of University and Research) under grant numbers 2021 SGR 01053 and 01061, and 2017 SGR 1165, and from T02–20R (DGA). S.A.R. acknowledges the Ph.D. scholarship received from Universitat Politècnica de Catalunya and Banco Santander (Predoctoral grant 2020 FPU-UPC_068). T.V. acknowledges the Ph.D. scholarship received from the Barcelona Research Center in Multiscale Science and Engineering of the UPC. M.M and J.Ll. are Serra Hunter Fellows and J.Ll. and M.P.G. are grateful to ICREA Academia Program (Generalitat de Catalunya). Furthermore, the use of Servicio General de Apoyo a la Investigación (SAI, University of Zaragoza) and the Advanced Microscopy Laboratory (LMA) are also acknowledged., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001300-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly selective CO formation via CO2 hydrogenation over novel ceria-based high-entropy oxides (HEOs)

  • Cortazar, Maria
  • Lafuente, Marta
  • Navarro-Puyuelo, Andrea
  • Garcia, Xènia
  • Llorca, Jordi
  • Reyero, Inés
  • Bimbela, F.
  • Gandía, Luis M.
In the present study, new ceria-based high-entropy oxides (HEOs) were investigated as CO2 hydrogenation catalysts. The nominal composition was (Ce0.5Ni0.1Co0.1Cu0.1Zn0.1Mg0.1)Ox and the synthesis was accomplished through the citrate complexing sol–gel method. Characterization techniques utilized including ICP-AES, in situ XRD and in situ XPS, SEM-EDS, HR-TEM and HAADF-STEM, Raman spectroscopy, H2-TPR, CO2-TPD and N2 physical adsorption. The physicochemical characterization and the catalytic results revealed that the conditions of the thermal treatments at which the oxides were subjected critically determined the catalytic performance, especially the CO2 hydrogenation products selectivities. Calcination in air and/or reduction in hydrogen conducted at temperatures below 500 °C led to active but poorly selective catalysts that produced both methane and CO with significant yields. This was mainly attributed to the presence of metallic Cu, Ni and Co on the catalysts that appeared to be supported on ceria doped with the rest of the formulation elements. In contrast, thermal treatments at 750 °C favored the formation of a rocksalt entropy-stabilized (NiCoCuZnMg)Ox HEO supported on ceria that has stood out for showing an excellent selectivity towards the reverse water–gas shift (RWGS) reaction. This catalyst led to CO selectivities of almost 100 % over a very wide range of reaction temperatures (300–700 °C). Long-term stability tests (100 h) showed only a slight decrease in CO2 conversion, while CO selectivity remained stable at nearly 100 % at 400 °C. XRD characterization of the used catalysts evidenced that, whereas the basic catalyst structure remained, some metallic copper exsolved during reduction and reaction period. These results are relevant and very promising, opening a door to the development of new catalysts for the valorization of CO2 through the RWGS reaction, thus expanding the low-temperature limit at which this process can be carried out selectively., Authors wish to thank the Spanish Agencia Estatal de Investigación (AEI) and Ministerio de Ciencia e Innovación (MCIN), the European Regional Development Fund (ERDF/FEDER), the European Union’s NextGenerationEU funds for their financial support. In particular, this work was partially funded by the following research projects: TED2021-130846B-I00 (MULTIeFUEL project), PID2021-127265OB-C21 (SOLFUEL project), PLEC2022-009221 (Panel-to-Fuel project), PID2021-124572OB-C31, and CEX2023-001300-M. M. Cortazar and M. Lafuente also thank Ministerio de Universidades (Spain) and NextGenerationEU funds for their ¨Margarita Salas¨ postdoctoral grants. JL is a Serra Húnter Fellow and is grateful to ICREA Academia program., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001300-M)., Open access funding provided by Universidad Pública de Navarra., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glucose electrooxidation with simultaneous H2 production on nickel-zinc electrocatalysts derived from an ethylenediamine-functionalized zeolitic imidazole framework

  • Mejia-Centeno, Karol V.
  • Montaña-Mora, Guillem
  • Chacón-Borrero, Jesús
  • Xue, Qian
  • Gong, Li
  • Martí-Sànchez, Sara
  • Berlanga, Armando
  • Llorca, Jordi
  • Ibáñez, María
  • Arbiol, Jordi
  • Qi, Xueqiang
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The oxidation of biomass-derived compounds such as glucose within electrochemical cells enables both the energy-efficient production of hydrogen and the generation of additional added-value chemicals from biomass. However, for this biomass valorization approach to become commercially viable, selective, cost-effective, and highly active electrooxidation catalysts need to be developed. In this work, we detail the synthesis of a nickel (Ni) and zinc (Zn)-based electrocatalyst for the glucose oxidation reaction (GOR) to formic acid (FoA) via calcination of a Zn-based zeolitic imidazole framework (ZIF) functionalized with ethylenediamine and doped with Ni. The structure, morphology, and electrochemical performance of the catalysts towards the anodic GOR to FoA coupled with the cathodic hydrogen evolution reaction (HER) are subsequently studied. Chronopotentiometry tests with 0.1 M of glucose show a conversion of 94 % at 250 mA in only 70 min, with a Faradaic efficiency (FE) of 91 % toward the production of FoA. Meanwhile, at the cathode, the HER FE is close to 98 %., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22 & PID2023-149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and European Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of Science, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023-042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. ICN2 is founding member of e-DREAM. [76] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and to projects PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and to the GC 2021 SGR 01061 grant., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Liquid-like versus stress-driven dynamics in a metallic glass former observed by temperature scanning X-ray photon correlation spectroscopy

  • Frey, Maximilian
  • Neuber, Nico
  • Riegler, Sascha Sebastian
  • Cornet, Antoine
  • Chushkin, Yuriy
  • Zontone, Federico
  • Ruschel, Lucas Matthias
  • Adam, Bastian
  • Nabahat, Mehran
  • Yang, Fan
  • Shen, Jie
  • Westermeier, Fabian
  • Sprung, Michael
  • Cangialosi, Daniele
  • Di Lisio, Valerio
  • Gallino, Isabella
  • Busch, Ralf
  • Ruta, Beatrice
  • Pineda, Eloi
Since several decades, the dynamics and vitrification kinetics of supercooled liquids are the subject of active research in science and engineering. Profiting from modern detector technology and highly brilliant fourth-generation synchrotron radiation, we apply temperature scanning X-ray photon correlation spectroscopy (XPCS) to probe the dynamics of a Pt-based metallic glass former in the glass, glass transition region, and supercooled liquid, covering up to six orders of magnitude in timescales. Our data demonstrates that the structural α-relaxation process is still observable in the glass, although it is partially masked by a faster source of decorrelation observed at atomic scale. We present an approach that interprets these findings as the superposition of heterogeneous liquid-like and stress-driven ballistic-like atomic motions. This work not only extends the dynamical range probed by standard isothermal XPCS but also adds a different view on the α-relaxation across the glass transition and provides insights into the anomalous, compressed temporal decay of the density-density correlation functions observed in metallic glasses and many out-of-equilibrium soft materials., Open Access funding enabled and organized by Projekt DEAL., This project has received funding (in terms of A.C., J.S., B.R.) from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant Agreement No 948780). E.P. acknowledges financial support by grant PID2023-146623NB-I00 and the Maria de Maeztu Units of Excellence Programme grant CEX2023-001300-M funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001300-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanochemical synthesis of highly dispersed Cu on CeO2 for the reverse water-gas shift reaction

  • Lu, Xuan
  • Yu, Jing
  • Li, Junshan
  • Serrano, Isabel
  • Arbiol, Jordi
  • Cabot, Andreu
  • Llorca, Jordi
Copper-based catalysts are highly promising for carbon dioxide (CO2) reduction to carbon monoxide (CO) via the reverse water-gas shift (RWGS) reaction, owing to their efficiency, copper abundance, sustainability and cost-effectiveness. However, enhancing CO2 conversion and CO selectivity requires achieving high copper dispersion through a scalable and economical synthesis method. In this study, Cu was combined with CeO2 rods via a mechanochemical ball-milling approach to optimize performance in the RWGS reaction. Comprehensive characterization and kinetic analysis revealed how metal content influences catalyst architecture and activity. Additionally, in situ diffuse reflectance infrared Fourier transform spectroscopy was used to investigate the nature of copper species at different dispersion levels and elucidate the reaction pathway. Notably, the Cu/CeO2 catalyst with a high Cu loading (~5 wt%) and well-dispersed active sites achieved an activity (RCu(CO2)) of 4.8◊10−5 molCO2 mCu−2 s−1 with over 99% CO selectivity at 450 °C. These findings provide a robust strategy for developing high-performance Cu-based catalysts for the RWGS reaction., This work was financially supported by projects MCIN/AEI/FEDER PID2021-124572OB-C31, PID2023-149158OB-C43 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, GC 2021 SGR 01061 grant, and the SyDECat project from Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program. X.L. and J.Y. are grateful to the China Scholarship Council (CSC) for the scholarship support. IREC authors acknowledge funding from Generalitat de Catalunya 2021SGR01581 and European Union NextGenerationEU/PRTR. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM. [45] J. Li is grateful for the Natural Science Foundation of Sichuan project (2025NSFSC0139)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting high-loading zinc-ion battery performance: Zn-Doped δ-MnO2 cathodes to promote Zn2+ storage

  • Chacón-Borrero, Jesús
  • Chang, Xingqi
  • Min, Zhiwen
  • Yu, Jing
  • Montaña-Mora, Guillem
  • Mejia-Centeno, Karol V.
  • Sun, Yuanmiao
  • Zhou, Xiaolong
  • Tunmee, Sarayut
  • Kidkhunthod, Pinit
  • Li, Junshan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
Rechargeable aqueous zinc-ion batteries (AZIBs) have emerged as a leading contender for stationary energy storage systems due to their low cost, safety, and environmental sustainability. However, their widespread practical application is hindered by the limited stability and capacity of current AZIB cathodes, such as manganese oxide (MnO<inf>2</inf>), which affects their long-term cost-effectiveness. To overcome this limitation, we introduce zinc (Zn) doping in δ-MnO<inf>2</inf>, which modulates the electronic states of Mn atoms, suppresses Jahn–Teller distortion, and enhances structural stability. Additionally, the use of a binder-free, self-supported porous electrode without current collectors facilitates three-dimensional ion diffusion, further improving electrochemical performance. As a result, the assembled AZIBs demonstrate outstanding rate capability, delivering 440 mAh∙g<sup>-1</sup> at 0.2 A∙g<sup>-1</sup> and retaining 118 mAh∙g<sup>-1</sup> at 24 A∙g<sup>-1</sup> for Zn-doped δ-MnO<inf>2</inf>, outperforming the bare δ-MnO<inf>2</inf> with 356 mAh∙g<sup>-1</sup> at 0.2 A∙g<sup>-1</sup> and 80 mAh∙g<sup>-1</sup> at 24 A∙g<sup>-1</sup>. Additionally, the Zn-doped δ-MnO<inf>2</inf> exhibits excellent cycling performance with ∼100 % capacity retention after 6000 cycles at 150 mAh∙g<sup>-1</sup> at 10 A∙g<sup>-1</sup>. Furthermore, Zn-doped MnO<inf>2</inf> electrodes integrated with carbon nanotubes achieve a high capacity of ∼210 mAh∙g<sup>-1</sup>, even at an ultrahigh mass loading (∼20 mg∙cm<sup>-2</sup>) at 0.6 mA∙g<sup>-1</sup>. While energy storage in MnO<inf>2</inf> involves the reaction and insertion of H<sup>+</sup>, Mn<sup>2+</sup>, and Zn<sup>2+</sup> cations, density functional theory calculations reveal that Zn intercalation is the dominant storage mechanism in these cells. Overall, this study highlights the potential of Zn-doped MnO<inf>2</inf> cathodes as a promising strategy for advancing the stability, capacity, and rate performance of next-generation AZIBs., This work was supported by the project SyDECat (PID2022–136883OB-C22), financed by the Spanish MCIN/AEI, EHAWEDRY (964524), financed by European EXCELLENT SCIENCE – Further and Emerging Technologies, the National Natural Science Foundation of China (52272054, 52125105, 52061160484, 51972329), Natural Science Foundation of Guangdong Province (2019TX05L389, 2022A1515011365), Shenzhen Science and Technology Planning Project (GJHZ20220913142809019, JCYJ20200109115624923), and the Foundation of the National Research Council of Thailand (N42A650253). Thanks to the China Scholarship Council (CSC) for the scholarship support. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Grant RED2022–134508-T (CAT&SCALE) funded by MCIN/AEI /10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16–014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM. [59] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MCIN/FEDER PID2021–124572OB-C31, CEX2023–001300-M, and GC 2021 SGR 01061., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023–001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cu and Ga dual sites on Ce0.9Zr0.1O2 for CO2 hydrogenation to methanol

  • Lu, Xuan
  • Garcia, Xènia
  • Serrano, Isabel
  • Biset-Peiró, Martí
  • Yu, Jing
  • Li, Junshan
  • Arbiol, Jordi
  • Cabot, Andreu
  • Llorca, Jordi
Cu-based catalysts are highly attractive for CO<inf>2</inf> hydrogenation to methanol due to their efficiency, selectivity, and cost-effectiveness. To further accelerate methanol synthesis, dual-site activation mechanisms are particularly effective. In this direction, solid solutions serve as effective supports, enhancing methanol production through improved hydrogenation, though the exact nature of the active sites in CuGa-based solid solutions remains unclear. In this study, we examine the synergistic interactions between Ga and Cu nanoparticles/clusters deposited on Ce<inf>0.9</inf>Zr<inf>0.1</inf>O<inf>2</inf> for CO<inf>2</inf>-to-methanol hydrogenation. Through in situ diffuse reflectance infrared Fourier transform spectroscopy and temperature-programmed (TPR/TPD), we analyze the nature of the active sites and elucidate the reaction pathway. The results demonstrate that CO<inf>2</inf> adsorption and activation are favored by the appropriate Cu/Ga ratio, while Ga sites, in addition to Cu, play a critical role in promoting H<inf>2</inf> dissociation under methanol synthesis conditions. Furthermore, the oxygen vacancies in the CuGa/Ce<inf>0.9</inf>Zr<inf>0.1</inf>O<inf>2</inf> catalyst play a crucial role in stabilizing the key *HCOO intermediate, facilitating its further hydrogenation to methanol via the formate pathway. This synergy between Ga and Cu optimizes both CO<inf>2</inf> activation and hydrogenation steps, emphasizing Ga as an active site alongside Cu and highlighting the catalyst's potential for efficient methanol production from CO<inf>2</inf>., This research was funded by projects PID2021-124572OB-C31 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, EU and FEDER, and GC 2021 SGR 01061 grant. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program. X.L. and J.Y. are grateful to the China Scholarship Council (CSC) for the scholarship support. This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). IREC authors acknowledge funding from Generalitat de Catalunya 2021SGR01581 and European Union NextGenerationEU/PRTR. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM.[52] J. Li is grateful for the project from the Natural Science Foundation of Sichuan Province (2025ZNSFSC0139)., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D-printed Ni/γ-Al2O3 catalysts for CO2 methanation: Effect of Ni loading and sintering temperature

  • Razavi, Seyed Ali
  • Fargas, Gemma
  • Serrano, Isabel
  • Laguna-Bercero, M. A.
  • Vilella, Tània
  • Llanes, Luis
  • Rodríguez, Daniel
  • Ginebra, Maria-Pau
  • Llorca, Jordi
  • Morales, Miguel
Data will be made available on request., Additive manufacturing (AM) technologies are revolutionizing the production of ceramic components, particularly in fields like catalysis, where complex shapes offer remarkable advantages in performance. AM also minimizes material waste while reducing the number of fabrication steps. This work is focused on the fabrication of Ni/γ-Al2O3 monoliths for CO2 methanation in one step by using Direct-Ink Writing (DIW) of Ni-enriched hydrogel-based γ-Al2O3 inks, and the debinding and sintering in a single thermal treatment. For this purpose, the influence of Ni precursor amount (2.5–5.0 wt% Ni) on the rheological properties of inks and the catalytic activity is investigated. Monoliths with woodpile architecture and 50 % infill are sintered at 450 °C and 600 °C to determine the effect of the sintering temperature on the Ni distribution in the catalyst. Results evidence successful incorporation of the metallic active phase into the monolithic structures. Both the Ni amount and sintering temperature are key factors to enhance the CO2 methanation performance. The 5.0 wt% Ni monolith sintered at 450 °C presents both the highest CO2 conversion and methane selectivity at 350–500 °C, due to better reduction degree, dispersion, and smaller size of Ni nanoparticles at the maximum metal loading. These remarkable results demonstrate the potential of DIW for the fabrication of fully 3D-printed monolithic catalysts with well-dispersed metal particles, all while minimizing production steps., The research reported in this paper received support from the EU Regional Development Fund through the Operational FEDER of Catalonia 2014–2020 RIS3CAT-BASE3D, from projects PID2024-156765OB-C21, PID2021-125150OB-I00, PID2021-126614OB-I00, PID2022-137274NB-C32, and PID2022-137626OB-C31 funded by MCIN/AEI/10.13039/501100011033, EU and FEDER. This work was part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033. This research was also supported by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+). Additional funding was also received from AGAUR (Agency for Administration of University and Research) under grant numbers 2021 SGR 01053 and 01061, and 2017 SGR 1165, and from T02-20R (DGA). S.A.R. acknowledges the Ph.D. scholarship received from Universitat Politècnica de Catalunya and Banco Santander (Predoctoral grant 2020 FPU-UPC_068). T.V. acknowledges the Ph.D. scholarship received from the Barcelona Research Center in Multiscale Science and Engineering of the UPC. J.Ll. and M.M are Serra Hunter Fellows and M.P.G. are grateful to ICREA Academia Program (Generalitat de Catalunya). Furthermore, the use of Servicio General de Apoyo a la Investigación (SAI, University of Zaragoza) and the Advanced Microscopy Laboratory (LMA) are also acknowledged. The authors also thank Gauthier Koch for their assistance during this research., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001300-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligand-Mediated Tailoring of Self-Supported MnxOy@Ni(OH)2 Nanoheterostructures with Enhanced OER Performance

  • Chacón-Borrero, Jesús
  • Martí-Sànchez, Sara
  • Zhang, Xuesong
  • Lu, Xuan
  • Montaña-Mora, Guillem
  • Xue, Qian
  • Berlanga, Armando
  • Llorca, Jordi
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Qi, Xueqiang
  • Guardia, Pablo
  • Cabot, Andreu
We report a colloidal synthesis strategy for producing MnxOy@Ni(OH)2 nanoheterostructures under mild conditions, i.e., low temperature and ambient pressure. The role of carboxylic acid ligands in directing the synthesis is systematically explored, revealing that lower ligand concentrations along with low-molecular weight molecules favor the formation of well-defined MnxOy@Ni(OH)2 heterostructures. Electrochemical characterization demonstrates that the resulting nanocomposites exhibit significantly enhanced electrochemical surface area and oxygen evolution reaction (OER) activity compared to their single-component counterparts. Specifically, MnxOy@Ni(OH)2 achieves a low overpotential of 299 mV at 10 mA cm-2, a Tafel slope of 61 mV dec-1, and a low charge transfer resistance of 9 Ω. The improved OER performance is attributed to the synergistic effect between the Ni(OH)2 nanosheets, which facilitate *OOH intermediate formation, and the MnO2 component, known for its intrinsic catalytic activity. Additionally, Mn3O4 serves as a stabilizing phase and precursor to MnO2, contributing to the overall durability and structural integrity of the catalyst., The authors thank the support from the Spanish Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 (Grant No. PID2022-136883OB-C22-project SyDECat- and Grant No. CNS2022-135583). P.G. acknowledges the financial support from MCIN/AEI/10.13039/501100011033 and from FSE+ within the Ramón y Cajal program (RYC2019-028414) and the ‘Severo Ochoa’. Program for Center of Excellence in R&D (Grant No. CEX2023-001263-S). Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MICIN/AEI/FEDER PID2021-124572OB-C31 and CEX2023-001300-M, and GC 2021 SGR 01061. ICN2 acknowledges funding from the Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) and by the Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AmaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDFA way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No. CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is a founding member of e-DREAM., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023-001263-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Qal’a of Beni Ḥammād (medieval Algeria) and glaze technology: technological transfers, trade and local production

  • Djellid, Akila
  • Salinas Pleguezuelo, Elena
  • Pradell, Trinitat
The Qal’a of Beni Ḥammād served as the capital of the Hammadids in the 11th century and constituted an important enclave for understanding commercial, political and economic relations in the Mediterranean and central Maghreb − present-day Algeria- during the Middle Ages. Despite its importance in the history of the central Maghreb, it is largely unknown in terms of material culture and technology. For the first time, a representative sample of glazed pottery from old archaeological excavations at the Qal’a Beni Ḥammād has been selected in order to characterise them, shed some light on their production and consumption, and to establish possible links with other Mediterranean enclaves. A ceramic assemblage is examined using a combination of microanalytical techniques (FESEM-EDS, OM, micro-XRD), including the recent discovery of a kiln rod. Two main ceramic groups have been identified, the largest of probable local production, in addition to some overseas imports. The ceramics show a wide range of glazing techniques and decoration methods, including lustre, a technical diversity which indicates the development that glazing technology had reached in the central Maghreb during the 11th C. Finally, the presence of tin oxide in the glazes to achieve opacity confirms the widespread availability and use of tin in the pottery industry during the Hammadid period., This work was financially supported by Ministerio de Ciencia e Innovación (Spain, PID2022-137783OB-I00, PID2021-124325OA-I00, CNS2023-145440) and MCIN/AEI/FEDER CEX2023-001300-M (10.13039/501100011033), Generalitat de Catalunya (2021 SGR 00343) and Junta de Andalucía (PROYEXCEL_00990). We are grateful to Ministry of Culture and Arts and the Museum of Antiquities and Islamic Arts of Algeria., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct recycling of 3D-printed Co-YDZ catalysts for ethanol steam reforming

  • Razavi, Seyed Ali
  • Fargas, Gemma
  • Serrano, Isabel
  • Laguna-Bercero, M. A.
  • Vilella, Tània
  • Llanes, Luis
  • Rodríguez, Daniel
  • Ginebra, Maria-Pau
  • Llorca, Jordi
  • Morales, Miguel
Data will be made available on request., Additive manufacturing enhances the catalyst performance via hierarchical design. To address environmental and resource concerns, this work aims to fabricate directly recycled 3D-printed monoliths using Direct-Ink Writing (DIW) from 100 % recovered cobalt-zirconia powders. Virgin cobalt-zirconia monoliths were firstly fabricated by DIW of 3.0–7.0 wt% Co-enriched hydrogel-based ceramic inks, followed by calcination at 600°C in a single thermal treatment. After testing the catalytic performance of monoliths in ethanol steam reforming, 3D-printed cobalt-zirconia monoliths were fragmented and subjected to subsequent milling and sieving steps to recover composite cobalt-zirconia powders with the appropriate properties for reuse in DIW. The recovered powders, inks and monoliths were microstructurally, rheologically and catalytically characterized, and then compared to catalysts constituted by virgin materials. The rheology properties of inks for the recycled and virgin monoliths presented an appropriate printability. Furthermore, the catalytic performance of recycled monoliths was close to that exhibited by virgin catalysts. This study demonstrates the feasibility of directly recycling fully 3D-printed catalysts, potentially reducing the environmental impact with a circular production model to enhance sustainability in the catalyst industry., The research reported in this paper received support from the EU Regional Development Fund through the Operational FEDER of Catalonia 2014–2020 RIS3CAT-BASE3D, from projects PID2024–156765OB-C21, PID2021–125150OB-I00, PID2021–126614OB-I00, PID2022–137274NB-C32, and PID2022–137626OB-C31 funded by MCIN/AEI/10.13039/501100011033, EU and FEDER. This work was part of Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI/10.13039/501100011033. This research was also supported by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+). Additional funding was also received from AGAUR (Agency for Administration of University and Research) under grant numbers 2021 SGR 01053 and 01061, and 2017 SGR 1165, and from T02–20R (DGA). S.A.R. acknowledges the Ph.D. scholarship received from Universitat Politècnica de Catalunya and Banco Santander (Predoctoral grant 2020 FPU-UPC_068). T.V. acknowledges the Ph.D. scholarship received from the Barcelona Research Center in Multiscale Science and Engineering of the UPC. M.M. and J.Ll. are Serra Hunter Fellows and J.Ll. and M.P.G. are grateful to ICREA Academia Program (Generalitat de Catalunya). Furthermore, the use of Servicio General de Apoyo a la Investigación (SAI, University of Zaragoza) and the Advanced Microscopy Laboratory (LMA) are also acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001300-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing
  • Usoltsev, Oleg
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto, Iván
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi
  • Lu, Xuan
  • Gupta, Kapil
  • Botifoll, Marc
  • Simonelli, Laura
  • Fauth, François
  • Zhou, Jin Yuan
  • Llorca, Jordi
  • Lu, Yan
  • Zhang, Chao Yue
  • Arbiol, Jordi
  • Cabot, Andreu
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly Li2S nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid Li2S nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications., IREC and HZB acknowledge financial support from the European Union (Grant agreement No. 101104006 ─ HEALINGBAT ─ HORIZON-CL5-2022-D2-01). J.Y. and C.H. thank the China Scholarship Council for the financial support. C.Y.Z. and J.Z. acknowledge the support of the Supercomputing Center of Lanzhou University, China. I.P.H. acknowledges funding from AGAUR-FI scholarship (2023FI-00268) Joan Oró of the Secretariat of Universities of the Generalitat of Catalonia and the European SocialPlus Fund. I.M. acknowledges financial support from the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101081337. XAS experiments were performed at the beamline-22-CLÆSS (Proposal Number: 2024068488),[50] and operando XRD was performed in beamline BL04-MSPD (Grant Number: 2023097750) at ALBA Synchrotron, Spain. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). IREC acknowledges funding from Generalitat de Catalunya 2021SGR01581, the European Union NextGenerationEU/PRTR, the 2BoSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033, and the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22). J.L. is a Serra Húnter Fellow and is grateful to projects MICIN/FEDER PID2024-156765OB-C21 and CEX2023-001300-M (MCIN/AEI 10.13039/501100011033). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work was performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16-014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM.[51], With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid-solid phase transitions across orientationally disordered phases: The case of tetrachloro-𝑚-xylene

  • Gebbia, Jonathan F.
  • Sanuy, Ares
  • Romanini, Michela
  • Aguilà, David
  • Negrier, Phillipe
  • Massip, Stephane
  • Barrio, María del
  • Fernández-Alonso, Félix
  • Mukhopadhyay, Sanghamitra
  • Appel, Markus
  • Cazorla, Claudio
  • Pardo, Luis Carlos
  • Tamarit, Josep Lluís
We uncover a previously unreported solid-solid phase transition in tetrachloro-𝑚-xylene (TCMX), a hexasubstituted benzene derivative exhibiting orientational disorder. Differential scanning calorimetry and powder x-ray diffraction reveal a weak but reproducible phase transition near 437K, corresponding to a continuous, second-order symmetry change from monoclinic 𝑃⁢21/𝑛 (phase II) to orthorhombic 𝑃⁢𝑛⁢𝑛⁢𝑚 (phase I). Despite this structural reorganization, quasielastic neutron scattering demonstrates that molecular dynamics remain governed by discrete 60∘ in-plane reorientational jumps consistent with the pseudosixfold molecular symmetry. The activation energy is unaffected, while only slight variations in relaxation times and effective rotational radii are detected. Molecular dynamics simulations reproduce the transition and clarify its microscopic origin. In phase II, weak orientational correlations between adjacent molecular columns are present, but these constraints vanish in phase I, restoring higher symmetry without altering the underlying reorientational mechanism. This study establishes TCMX as a rare example of a disorder-disorder transition in which molecular dynamics are preserved while collective orientational correlations reorganize. More broadly, our results highlight how subtle symmetry changes govern emergent behavior in disordered crystals, advancing the understanding of plastic phases and phase transitions in complex condensed matter systems., We acknowledge support from the Spanish Ministry of Science, Innovation and Universities under Grant No. MCIN/AEI/10.13039/501100011033, from the European Union European Regional Development Fund (FEDER) under Project No. PID2023-146623NB-I00, and under the “María de Maeztu” Program for Units of Excellence (Grant No. CEX2023-001300-M), as well as from the Generalitat de Catalunya (Grant No. 2021SGR-00343). D. Aguilà acknowledges support from the Spanish Ministry of Science and Innovation through Project No. CNS2022-135816., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001300-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chloroplasts-derived Ni-based electrocatalyst for efficient electrochemical ethanol oxidation to acetate with hydrogen cogeneration

  • Mejia-Centeno, Karol V.
  • Alarcón-Cabrera, Cristhyan C.
  • Chacón-Borrero, Jesús
  • Gong, Li
  • Yang, Linlin
  • Freitas, Fernanda M.
  • Yu, Jing
  • Llorens Rauret, David
  • Garzón Manjón, Alba
  • Carreón-Castro, María del Pilar
  • Tarancón, Albert
  • Llorca, Jordi
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
The electrochemical oxidation of biomass-derived organic molecules offers a dual advantage in hydrogen electrolysis: (i) it replaces the sluggish oxygen evolution reaction, accelerating hydrogen generation, reducing cell voltage, and enhancing energy efficiency, and (ii) it valorizes carbon-neutral organic resources into higher-value chemicals. However, the commercial adoption of this strategy relies on the development of electrocatalysts that are cost-effective, energy-efficient, selective, and stable. In this context, biomass not only provides the reactant but also serves as an exceptional resource for creating highly porous and active carbon-based electrocatalysts. In this work, we present a Ni-based electrocatalyst derived from biomass waste, specifically using natural chlorophyll extracted from discarded grape leaves. This catalyst achieves an impressive 86 % Faradaic efficiency for the ethanol oxidation reaction to acetate at 1.5 V, attributed to its large surface area and excellent charge transfer properties. Moreover, it enables 100 % hydrogen production as a co-product at 1.5 V during ethanol oxidation, enhancing its value for energy applications. This study highlights the transformative role of integrating renewable biomass into catalytic systems, demonstrating the potential of biomass-derived materials to drive innovation in electrocatalysis. By converting waste biomass into functional catalysts, this approach advances energy-efficient technologies and addresses environmental challenges of conventional synthesis., This work was financially supported by the SyDECat and AmaDE projects from the Spanish MCIN/AEI/FEDER (PID2022–136883OB-C22 & PID2023–149158OB-C43). The authors acknowledge funding from Generalitat de Catalunya 2021SGR01581, 2021SGR00457 and European Union Next Generation EU/PRTR. KVMC acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of Science, Technology, and Innovation of Colombia. PRMA acknowledges support from the Ramón y Cajal grant RYC2023–042982-I, funded by MICIU/AEI (10.13039/501100011033) and co-financed by FSE+. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. AGM has received funding from Grant RYC2021‐033479‐I funded by MCIN/AEI/ 10.13039/501100011033 and by European Union NextGenerationEU/PRTR. JY has received funding from the CSC-UAB PhD scholarship program. D.L.R. acknowledges grant PRE2022–102638. ICN2 is founding member of e-DREAM.83 J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects PID2024-156765OB-C21 and Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI 10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three-Dimensional Magnetoelectric Nanocomposite GelMA Hydrogels for Wireless Electrical Stimulation of Cardiac Cells

  • Viteri, Angel
  • Vargas-Estévez, Carolina
  • Colombi, Samuele
  • Resina, Leonor
  • Tan, Huan
  • Sort, Jordi
  • Ginebra, Maria-Pau
  • Engel, Elisabeth
  • Durá Alemañ, Carlos Javier
  • García-Torres, José
Bioelectrical cues are essential for cardiac function and regeneration, yet current electrostimulation strategies rely on invasive electrodes that limit spatial control and clinical translation. Here, we report magnetoelectric nanocomposite hydrogels that combine core-shell CoFe2O4@BiFeO3 magnetoelectric nanoparticles (ME NPs) with a photo-cross-linked methacrylated gelatin (GelMA) network, enabling wireless electroactivity through externally applied magnetic fields within a soft, biomimetic three-dimensional scaffold. Structural and physicochemical analyses confirmed the successful synthesis of crystalline core-shell ME NPs with strong interfacial coupling, as demonstrated by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and magnetic hysteresis measurements showing exchange bias effects. Homogeneous incorporation of ME NPs within GelMA produced highly porous and interconnected hydrogels, as revealed by scanning electron microscopy and microcomputed tomography. The presence of nanoparticles reduced equilibrium swelling and refined pore architecture, suggesting increased effective cross-linking density and nanoparticle-polymer interactions. Mechanical testing showed soft elastomeric behavior with compressive moduli compatible with cardiac tissue. Under dynamic magnetic stimulation, magnetoelectric hydrogels significantly enhanced cardiac cell viability, proliferation, and morphological organization compared with pristine GelMA controls. After 10 days, the metabolic activity of cells cultured on GelMA-ME NP hydrogels under stimulation was approximately 3-fold higher than that of unstimulated GelMA. These results demonstrate that magnetoelectric hydrogels provide an effective platform for wireless electrostimulation, offering promising opportunities for cardiac tissue engineering and implantable bioelectronic therapies without wired electrodes., The authors acknowledge funding from MCIU/AEI/10.13039/501100011033/FEDER, UE (CNS2022-136109, PID2024-157506OB-I00, PID2022-141120OB-I00, and PID2020-116844RB-C21) and Agència de Gestió d’Ajuts Universitaris i de Recerca de Catalunya (AGAUR) (2021-SGR-01368, 2021-SGR-00387, and 2021-SGR-00651) for financial support. A.V. thanks AGAUR for financial support (FI-SDUR grant). S.C. thanks AGAUR for financial support (FI grant). J.G.-T. acknowledges the Serra Hunter program of the Generalitat de Catalunya. M.-P.G., E.E., and C.A. received support for the research from the Generalitat de Catalunya through the prize “ICREA Academia.” This work is also part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure making and breaking in electrolyte solutions explained by water energetics

  • Sedano, Lucía F.
  • Pardo, Luis Carlos
  • Madrigal, Gustavo
  • Noya, Eva G.
  • Vega, Carlos
The long-standing classification of ions as water "structure-makers" or "structure-breakers" is fundamentally reevaluated through advanced Molecular Dynamics simulations employing the accurate Madrid-2019 force field. We quantitatively study the local hydration structures of 1 m aqueous solutions of LiCl, NaCl, and KCl (through local entropy and Kullback-Leibler (KL)-divergence analysis). We demonstrate that all ions act as net disruptors of water's tetrahedral network, this change being more severe in solutions with high charge density ions. While hydrogen bonding (HB) is diminished within the first hydration shell (FHS) of ions, it returns to bulk-like levels beyond it. From an energetic viewpoint, water-water interactions in solution are destabilized by about 15% compared to pure water, confirming all ions as "structure-breakers" in this regard. Two factors contribute to the energy loss of water: Roughly half arises from a 5% reduction in the total number of HBs, localized primarily within the ions' hydration shells (plus a small contribution from HB distortion); whereas the other half originates from the destabilization of dipole-dipole correlations beyond the FHS. This latter effect, which scales with ionic charge density, is absent for uncharged solutes. Finally, we identify a correlation between the total energy of water (including the ion-water contribution) in solution and the Jones-Dole B coefficient-a correlation that also holds for divalent cations and hydrophobic solutes. The transition from "structure-maker" to "structure-breaker" (i.e., the change of sign in the B coefficient) occurs near the locus where the total energy of water in the solution is similar to that of pure water., This work was supported by the MCIN Projects PID2020-112975GB-I00, TED2021-130265B-C22, PID2022-136919NB-C31, PID2025-168591NB-I00 and before this project acknowledge Ministerio de Ciencia Innovación y Universidades (MICIU) and also European Regional Development Fund and European Union PID2023-151751NB-I00 MICIU/ AEI/10.13039/501100011033, by the Dirección General de Universidades Project 2021SGR-00343 (Catalonia) and Maria de Maeztu project CEX2023-001300-M/funded by MCIN/AEI/10.13039/501100011033. L.F.S. acknowledges the Ministerio de Ciencia e Innovación (MCIN) for a predoctoral Formación de Profesorado Universitario under Grant No. FPU22/02900., With funding from the Spanish government through the ‘María de Maeztu Unit of Excelence’ accreditation (CEX2023-001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Harnessing Pt-Mn synergy for the engineering of high-performance TiO2 aerogel in pollutant removal

  • Tbessi, Imen
  • Benito, Monica
  • Molins, Elies
  • Llorca, Jordi
  • Najjar, Wahiba
  • Sayadi, Sami
Photocatalytic degradation of pollutants represents an effective approach to mitigate environmental contamination. In this study, porous Pt-Mn co-doped TiO<inf>2</inf> aerogel nanocomposites were synthesized via a one-pot sol-gel process followed by supercritical drying and evaluated for the degradation of methyl paraben (MeP) under UV-A irradiation. The simultaneous interfacial incorporation of Pt and Mn into a porous TiO<inf>2</inf> aerogel represents a novel photocatalyst design that combines the advantages of bimetallic modification with highly porous framework, creating synergistic surface/interface interactions that provide an unexplored strategy for efficient methyl paraben degradation. Structural analysis by X-ray diffraction confirmed the preservation of a pure anatase phase upon co-doping. Morphological and textural characterizations revealed spherical nanoparticles assembled into a highly porous network with large specific surface area. XPS and elemental mapping demonstrated the homogeneous dispersion of Pt and Mn species on the TiO<inf>2</inf> surface. Optical properties showed a red shift in the absorption edge along with band gap narrowing, reflecting modifications in the electronic structure induced by co-doping. Furthermore, photoluminescence analysis revealed a pronounced decrease in emission intensity for the co-doped samples, indicating suppressed electron-hole recombination due to the combined charge trapping effect of Pt and Mn. Photocatalytic experiments demonstrated significantly enhanced activity of the Pt-Mn/TiO₂ nanocomposites compared to pristine TiO₂, following pseudo-first-order kinetics. The 0.6%Pt-0.6%Mn/TiO₂ sample exhibited the highest performance, achieving 93 % MeP degradation within 120 min under UV-A irradiation, along with good stability over four cycles. These results demonstrate that the enhanced photocatalytic activity is driven by synergistic surface modification induced by Pt and Mn, which effectively charge separation. This work emphasizes the pivotal role of dopant-induced surface and interface engineering in governing photocatalytic performance for water treatment applications., IT, WN and SS wish to acknowledge financial support provided by the Tunisian Ministry of Higher Education and Scientific Research. MB and EM are grateful to grateful to MICINN/FEDER grant PID2021-124572OB-C32 and the Severo Ochoa Program for Centers of Excellence for the MATRANS42 CEX2023-001263-S project. JL is a Serra Húnter Fellow and is grateful to the Academia Excellence Programme (Catalan Government), project MICIN/FEDER PID2024-156765OB-C21, and the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI 10.13039/501100011033. The authors thank the X-ray diffraction, spectroscopic services, and Nanoquim platform from the ICMAB. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Multifunctional Electrocatalyst for Formate Production with Concurrent Hydrogen Evolution and Electrochemical Hydrogenation of Glucose to Sorbitol

  • Mejia-Centeno, Karol V.
  • Chacón-Borrero, Jesús
  • Xue, Qian
  • Qi, Xueqiang
  • Martí-Sànchez, Sara
  • Llorca, Jordi
  • Cadavid, Doris
  • Khan, Malik Dilshad
  • Arbiol, Jordi
  • Martínez-Alanis, Paulina R.
  • Cabot, Andreu
Electrochemical valorization of biomass-derived glucose offers a promising route for the sustainable coproduction of valuable chemicals and green hydrogen, yet hinges on the development of cost-effective, multifunctional catalysts. Here, we report a noble metal-free core-shell catalyst, Cu@CoFe2O4, that drives both anodic glucose oxidation and cathodic hydrogen evolution or glucose hydrogenation in a single system. In alkaline media (1 M KOH), the catalyst achieves a glucose conversion of 97.5% with a Faradaic efficiency (FE) of 91.2% toward formate at 1.3 V vs RHE, while enabling hydrogen evolution with 100% FE. In a neutral electrolyte (0.1 M Na2SO4), the same electrode facilitates the selective electrochemical reduction of glucose to sorbitol with an FE of 87.5% and 76% conversion at -0.4 V vs RHE. Experimental and computational analyses suggest that the Cu-rich core/CoFe2O4-rich shell-like heterostructure enhances charge transfer and provides complementary active sites, contributing to the observed activity toward both glucose oxidation and hydrogenation pathways. This work highlights a versatile, earth-abundant electrocatalytic platform for biomass conversion and sustainable hydrogen generation., K.V.M.C. acknowledges the grant from Call 906 of 2021 for Doctorates Abroad from the Ministry of Science, Technology, and Innovation of Colombia. P.R.M.A. thanks DGAPA-UNAM (PAPIIT grant IA203526) and SECIHTI (grant 2025-G-1497) for financial support. J.L. is a Serra Húnter Fellow and is grateful to the Academia Excellence Award (Generalitat de Catalunya) and projects MICIN/FEDER PID2024-156765OB-C21 and Maria de Maeztu Units of Excellence Programme CEX2023-001300 M funded by MCIN/AEI 10.13039/501100011033. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank the support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021-001214 S) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. JY has received funding from the CSC-UAB PhD scholarship program. ICN2 is a founding member of e-DREAM. (50), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatial control of trace TiO2 by atomic layer deposition to tune Co–TiOx interfaces for Fischer–Tropsch synthesis

  • Cariño, Ann Charise
  • Biset-Peiró, Martí
  • Martín Morales, Elena
  • Llorca, Jordi
  • Domínguez Ojeda, Eduardo
  • Garzón Manjón, Alba
  • Arbiol, Jordi
  • Guilera, Jordi
Atomic Layer Deposition (ALD) enables atomic-scale engineering of metal–support interfaces, yet the influence of promoter spatial distribution on catalytic performance remains insufficiently understood. In this work, trace amounts of TiO2 were deposited on mesoporous Al2O3 prior to cobalt wet impregnation, and the precursor dose and exposure time were varied to probe the relative influence of Ti loading and spatial distribution. A low-dose/high-exposure strategy led to preferential TiO2 enrichment at the external surface, as evidenced by XPS, HAADF-STEM-EDS, H2-TPR, and WDS analyses. The catalyst exhibiting stronger externalsurface Ti enrichment also showed higher turnover frequency (TOF), CO conversion, hydrocarbon yield, and C5+ selectivity in Fischer–Tropsch synthesis, despite a lower total exposed cobalt surface area determined by CO chemisorption. CO-DRIFTS revealed a pronounced red shift of the adsorbed CO band, indicating modified electronic properties and enhanced CO activation at the Co– TiOx interface. These results suggest that external-surface Ti enrichment contributes to the observed catalytic enhancement. Moreover, the study demonstrates that controlling TiO2 distribution by ALD is a promising strategy for tuning metal–oxide interfacial properties and improving FTS catalyst performance., This work has been co-funded by the European Union, under DocFam+ Fellowship Program (GA 10181337-HORIZON-MSCA-2021-COFUND-01), and VALOTAIL (PID2023–151777OB-I00) project, funded by Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033. Jordi Llorca is a Serra Húnter Fellow and is grateful to the Academia Excellence program (Generalitat de Catalunya), project PID2024-156765OB-C21 funded by MICIU/AEI/10.13039/501100011033 and FEDER, and Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MCIN/AEI 10.13039/501100011033. The authors would also like to thank Xavier Llovet from Scientific and Technological Centers of the University of Barcelona (CCiTUB) for electron probe microanalysis measurements., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001300-M), Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Relaxation spectrum of glass-forming alloys: Mechanical and microscopic insights

  • Xu, Zongrui
  • Meng, Shaoyi
  • Hao, Qi
  • Duan, Yajuan
  • Frey, Maximilian
  • Qiao, Jichao
  • Pineda Soler, Eloi
This work reviews recent findings on the dynamics of metallic glasses, focusing on the relationship between mechanical relaxation and microscopic dynamics, the latter explored by means of coherent x-ray scattering experiments. We first summarize the fundamental features of the mechanical relaxation spectrum of metallic glasses, encompassing a relaxation as well as secondary processes (such as ß and ¿). We examine the specificities and limitations of various characterization methods, and we survey what we currently know about how the relaxation spectrum evolves during cooling—from the supercooled liquid through the glass transition—and during physical aging of the glass. Subsequently, we contrast these macroscopic results with the microscopic dynamics. While macroscopic and microscopic observations appear consistent in the SCL, a notable divergence emerges in the glass state, with the emergence of compressed nonexponential relaxation functions. We discuss the possible origins of these differences in view of recent microscopic observations., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. MICIU/AEI/10.13039/501100011033 (Agencia Estatal de Investigación—Spanish Government) Grants PID2023-146623NB-I00 and CEX2023-001300-M. China Scholarship Council (CSC) – High-Level Postgraduate Program. Refs. 202206290063 and 202506290017 and Visiting PhD student grant, Reference 202306290147., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Shedding light on the formation mechanisms of Islamic polychrome lusters: a Cu, Fe, Ag micro XANES study

  • Sadurní Codina, Ruth
  • Molera Marimon, Judit
  • Hole, Clement
  • Juanhuix, Judith
  • Suarez Orduz, Hugo Alexander
  • Cotte, Marine
  • Pradell Cara, Trinitat
Islamic luster is a ceramic glaze decoration exploiting the quantum- confined optical response of noble metallic nanoparticles to produce a colorful metallic and iridescent appearance. Upon firing, silver and copper initially present in an overpaint diffuse into the glaze and are reduced to Ag0 and Cu0 nanoparticles. This study examines the relationship between luster colors and paint composition. The six analyzed shards are 9th century Abbasid polychrome lusters exhibiting green, red, ochre, and brown colors. Key chemical factors are revealed by imaging 16 luster cross sections with different micro- and nanoanalytical methods, including UV- Vis spectroscopy, Ag L3- , Cu- , and Fe K- edge micro x- ray absorption spectroscopy (μ- XAS), micro x- ray diffraction (μ- XRD), and field emission scanning electron microscopy (FIB- FE- SEM). These factors connect together (i) the Cu/Ag ratio; (ii) the Cu, Ag, and Fe speciation; (iii) the nature, size, and concentration of metallic nanoparticles; and (iv) the luster color. Notably, the Cu/Ag ratio balances the competitive reactions between Ag+ reduction and Cu+ disproportionation., We are grateful to the Ashmolean Museum (Oxford) for providing the samples of historical lusterware. Acknowledgments are given to e. Pineda and B.- J. Baas for the help with the XAS experiment, to h. castillo- Michel and M. Salomé for developing id21 instruments, and to d. crespo for providing the code for the Fe K- edge pre- edge fitting. Funding: this work was supported by the Ministerio de ciencia e innovación (Spain) research project nos. Pid2022- 137783OB- i00 (to t.P., R.S., and J.M.) and “Maria de Maeztu” (ceX2023- 001300- M, 10.13039/501100011033) (to t.P. and R.S.) and the Generalitat de catalunya research project 2021SGR- 00343 (to t.P. and R.S.). the μ- XRd experiments were performed at Bl13 XAlOc Beamline at AlBA Synchrotron Facility with the collaboration of Alba Staff project numbers 2023087681, 2024098586, and 20250370411 (to t.P., R.S., and J.J.). the μ- XAS experiments were performed at beamline id- 21 at the european Synchrotron Radiation Facility (eSRF) project numbers MA6420, hG224, ihhG58, Blc16391, and Blc16477 (to t.P., R.S., c.h., AS, and M.c.), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Decoupling elasticity, anelasticity, and plasticity in static and dynamic stress relaxation of metallic glasses

  • Hao, Qi
  • Liang, ShuYi
  • Xing, Guanghui
  • Pineda Soler, Eloi
  • Fusco, Claudio
  • Chazeau, Laurent
  • Pelletier, Jean Marc
  • Wang, Yunjiang
  • Yang, Yong
  • Qiao, Jichao
This version of the article has been accepted for publication, after peer review (when applicable) and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: http://dx.doi.org/10.1007/s11431-025-2970-4, The stretched exponent Kohlrausch-Williams-Watts (KWW) equation, which is to some extent equivalent to the generalized Maxwell viscoelastic model, is widely employed for analyzing relaxation dynamics and nonelastic deformation of amorphous solids. However, it cannot reveal the underlying physical mechanisms of anelasticity. In this study, based on the potential atomic mechanisms of amorphous solids within a strain field and the traditional viscoelastic model, we introduced a physical-mechanical model involving hierarchically constrained atomic motion around defect sites. This model deduces that fast atoms move first, subsequently facilitating more complex atomic rearrangements under thermomechanical loading. These atom movement mechanisms are involved in the evolution of deformation units, such as shear transformation zones (STZs). Initially, anelasticity is associated with isolated STZs because of back stress arising from the matrix. Subsequently, the percolation of STZ by the motion of atoms owing to STZ interactions leads to irreversible deformation. The model was validated by describing the elastic, anelastic, and plastic components of stress relaxation in a La60Ni15Al25 metallic glass. Furthermore, as STZs are connected to a and ß relaxation processes, the model can be used for parameter description and component analysis of dynamic stress relaxation. The current study supplements the traditional flow defect model, providing insights into the deformation mechanisms of metallic glasses from the perspective of viscoelastic mechanics and their correlation with dynamic relaxation processes., This work is supported by the NSFC (Grant Nos. 12472069, 52271153 and 12072344); the Natural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province (Grant No. 2021JC-12); the Natural Science Foundation of Shaanxi Province (Grant No. 2025GH-YBXM046); the Youth Innovation Promotion Association of the Chinese Academy of Sciences; Research Grant Council (RGC); the Hong Kong government through the General Research Fund (GRF) with the grant numbers CityU11200719 and CityU11213118; PID2023-146623NB-I00 and Maria de Maeztu Units of Excellence Programme CEX2023-001300-M funded by MICIU/AEI/10.13039/501100011033; 2021-SGR-00343 funded by Generalitat de Catalunya/AGAUR., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Probing the dynamic heterogeneity of an amorphous alloy from the perspective of stress relaxation

  • Ning, Li Xi
  • Hao, Qi
  • Zhang, Langting
  • Wang, Y. J.
  • Pineda Soler, Eloi
  • Park, Eun Soo
  • Qiao, Jichao
This version of the article has been accepted for publication, after peer review (when applicable) and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1007/s10338-026-00715-y, Stress relaxation experiments on a Zr50Cu34Ag8Al8 amorphous alloy reveal that its dynamic heterogeneity is captured by a Kohlrausch–Williams–Watts stretched exponential function, demonstrating a non-Gaussian, asymmetric relaxation spectrum. The analysis based on the generalized Maxwell model revealed that the relaxation process is accelerated at high temperatures, indicating that increasing temperature makes more deformation units and promotes the formation of “liquid-like” zones. ßkww exhibits a non-monotonous trend with temperature due to the combined effects of temperature and structural relaxation. Physical aging improves structural stability by shifting the activation energy distribution toward higher values for increasing aging times. This results in a system energetic state closer to equilibrium, lowering the overall energy level and suppressing the relaxation process. Notably, it is found that the dynamic heterogeneity does not decrease but instead increases with aging. These findings provide significant insights into the structural origins of the viscoelastic behavior of amorphous alloys., This work is supported by the NSFC (Grant Nos.52271153 and 12472069), the Natural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province (Grant No. 2021JC-12), the Natural Science Foundation of Shaanxi Province (Grant No. 2025GH-YBXM-046), and the Fundamental Research Funds for the Central Universities. YJW was financially supported by NSFC (Grant No. 12472112) and the Strategic Priority Research Program of the Chinese Academy of Sciences (Grants No. XDB0620103 and No. XDB0510301). YY acknowledges financial support from the Research Grant Council (RGC), the Hong Kong government through the General Research Fund (GRF) with the grant numbers CityU11200719 and CityU11213118. EP acknowledges financial support by grant PID2023-146623NB-I00 funded by MICIU/AEI/10.13039/501100011033, the Maria de Maeztu Units of Excellence Programme grant CEX2023-001300-M funded by MICIU/AEI/10.13039/501100011033, and grant 2021-SGR-00343 funded by AGAUR-Generalitat de Catalunya. ESP was supported by the Creative Materials Discovery Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science and ICT (No. NRF-2019M3D1A1079215). X.L.Ning is sponsored by the Cultivation of Master’s Degree Graduate Students’ Practical Innovation Ability Fund of Northwestern Polytechnical University (No. PF2025055)., Peer Reviewed, Postprint (author's final draft)