Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Water-hydroxide trapping in cobalt tungstate for proton exchange membrane water electrolysis

  • Ram, Ranit|||0000-0002-7999-5551
  • Xia, Lu
  • Benzidi, Hind|||0000-0002-9705-2389
  • Guha, Anku|||0000-0003-4533-6336
  • Golovanova, Viktoria|||0000-0002-4008-0733
  • Garzón Manjón, Alba|||0000-0003-2954-1102
  • Llorens Rauret, David|||0000-0001-5359-5456
  • Sanz Berman, Pol|||0000-0001-8736-404X
  • Dimitropoulos, Marinos|||0000-0002-1466-4575
  • Mundet, Bernat|||0000-0003-0608-2070
  • Pastor, Ernest|||0000-0001-5334-6855
  • Celorrio, Veronica|||0000-0002-2818-3844
  • Mesa, Camilo A.|||0000-0002-8450-2563
  • Das, Aparna M.|||0000-0001-7250-1291
  • Pinilla-Sánchez, Adrián|||0000-0002-4532-942X
  • Giménez, Sixto|||0000-0002-4522-3174
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • López, Núria|||0000-0001-9150-5941
  • García de Arquer, F. Pelayo|||0000-0003-2422-6234
The oxygen evolution reaction is the bottleneck to energy-efficient water-based electrolysis for the production of hydrogen and other solar fuels. In proton exchange membrane water electrolysis (PEMWE), precious metals have generally been necessary for the stable catalysis of this reaction. In this work, we report that delamination of cobalt tungstate enables high activity and durability through the stabilization of oxide and water-hydroxide networks of the lattice defects in acid. The resulting catalysts achieve lower overpotentials, a current density of 1.8 amperes per square centimeter at 2 volts, and stable operation up to 1 ampere per square centimeter in a PEMWE system at industrial conditions (80°C) at 1.77 volts; a threefold improvement in activity; and stable operation at 1 ampere per square centimeter over the course of 600 hours.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly durable nanoporous Cu2-xS films for efficient hydrogen evolution electrocatalysis under mild pH conditions

  • Fernández-Climent, Roser
  • Redondo, Jesús
  • García-Tecedor, Miguel
  • Spadaro, Maria Chiara
  • Li, Junnan
  • Chartrand, Daniel
  • Schiller, Frederik
  • Pazos, Jhon
  • Hurtado, Mikel F.
  • Peña O'Shea, Victor de la
  • Kornienko, Nikolay
  • Arbiol, Jordi
  • Barja, Sara
  • Mesa, Camilo A.
  • Giménez, Sixto
Copper-based hydrogen evolution electrocatalysts are promising materials to scale-up hydrogen production due to their reported high current densities; however, electrode durability remains a challenge. Here, we report a facile, cost-effective, and scalable synthetic route to produce Cu2-xS electrocatalysts, exhibiting hydrogen evolution rates that increase for ∼1 month of operation. Our Cu2-xS electrodes reach a state-of-the-art performance of ∼400 mA cm-2 at -1 V vs RHE under mild conditions (pH 8.6), with almost 100% Faradaic efficiency for hydrogen evolution. The rise in current density was found to scale with the electrode electrochemically active surface area. The increased performance of our Cu2-xS electrodes correlates with a decrease in the Tafel slope, while analyses by X-ray photoemission spectroscopy, operando X-ray diffraction, and in situ spectroelectrochemistry cooperatively revealed the Cu-centered nature of the catalytically active species. These results allowed us to increase fundamental understanding of heterogeneous electrocatalyst transformation and consequent structure-activity relationship. This facile synthesis of highly durable and efficient Cu2-xS electrocatalysts enables the development of competitive electrodes for hydrogen evolution under mild pH conditions., ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), Generalitat de Catalunya, and the Basque Government (grant IT1591-22). The authors thank the support from the projects (RED2022-134508-T, PID2020-116093RB-C41, PID2020-116093RB-C43, and PID2020-116093RB-C44) funded by MCIN/AEI/10.13039/501100011033/ and the project TED2021-129999A-C33 financed by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. C.A.M. acknowledges funding from UJI postdoc fellowship POSDOC/2019/20, the Generalitat Valenciana for the APOSTD/2021/251 fellowship, and to MinCiencias Colombia through the Fondo Nacional de Financiamiento para la Ciencia, la Tecnología y la Innovación “Francisco José de Caldas”, call 848-2019. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. M.C.S. has received funding from the post-doctoral fellowship Juan de la Cierva Incorporation from MICINN (JCI-2019) and the Severo Ochoa programme. S.B. acknowledges grant RYC-2017-21931 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in Your Future, EUR2020-112066 funded by MCIN/AEI /10.13039/501100011033 and by European Union NextGenerationEU/PRTR, and UPV/EHU project EHUrOPE19/01. J.R. acknowledges the Czech Science Foundation and funding from PIF outgoing project number 22-18079O., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A survey of Earth-abundant metal oxides as oxygen evolution electrocatalysts in acidic media (pH < 1)

  • Yu, Jiahao
  • Giancola, Stefano
  • Khezri, Bahareh
  • Nieto-Castro, David
  • Redondo, Jesús
  • Schiller, Frederik
  • Barja, Sara
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Garcés-Pineda, Felipe A.
  • Galán-Mascarós, José Ramón
This article is part of the themed collection: Hydrogen production, Electrolytic hydrogen appears as one of the most promising options to store renewable energy. In this water splitting process, the sluggish kinetics of the 4-electron oxygen evolution reaction (OER) with its high overpotentials have been widely regarded as the bottleneck to facilitate a fast, energy-efficient process. In alkaline media, numerous earth-abundant metal oxides are efficient OER catalysts, stabilized by the high concentration of hydroxide anions in the electrolyte. However, under acidic conditions, where the hydrogen evolution reaction (HER) is technologically preferred, only noble metal-based oxides (RuO2 and IrO2) are suitable OER catalysts, putting into question the scalability to wide-spread applications due to their scarcity and high cost. Most earth abundant metal oxides dissolve at high proton concentrations. A promising strategy to avoid this drawback consists of incorporating these catalysts into partially hydrophobic composite electrodes. Following this strategy, we have been able to conduct an extensive survey of the activity and stability of mono-, bi- and trimetallic earth-abundant transition metal oxides during the electrocatalytic OER under strongly acidic conditions. Our results confirm the general validity of the strategy by using a hydrophobic electrode to confer high stability to common metal oxides under these harsh conditions. Among all OER catalysts investigated, we found that simple manganese oxides appeared as the most active also exhibiting high, long-term stability. In particular, the stability of Mn2O3 oxide in the OER in acidic media was well confirmed by post-electrolysis characterization data., The authors are thankful for the support from MCIN/AEI/10.13039/501100011033/ and “ERDF A way of making Europe” through projects RED2022-134508-T (CAT&SCALE), PID2021-124796OB-I00 and PID2020-116093RB-C43&C44 funded by MCIN/AEI/10.13039/501100011033; from the Generalitat de Catalunya (2021SGR1154 and 2021SGR00457), and from the Basque Government (IT-1591-22). S.B. acknowledges RYC-2017-21931 funded via MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future and UPV/EHU project EHUrOPE19/01. ICIQ and ICN2 are supported by the Ministerio de Ciencia e Innovación through the Severo Ochoa Excellence Accreditations CEX2019-000925-S (MCIN/AEI) and CEX2021-001214-S; and by the CERCA Programme/Generalitat de Catalunya. J.Y. thanks the China Scholarship Council (CSC) for predoctoral fellowships (File No. 201806270234). J.R. acknowledges the Czech Science Foundation and funding from PIF outgoing project number 22-18079O. M.C.S. has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skodowska-Curie grant 754510 (PROBIST) and the Severo Ochoa programme. M.C.S. is also thankful for the funding from the postdoctoral fellowship Juan de la Cierva Incorporation from MICINN (JCI-2019) and the Severo Ochoa programme. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and the Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000925-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Complementary probes for the electrochemical interface

  • Pastor, Ernest
  • Lian, Zan
  • Écija, David
  • Galán-Mascarós, José Ramón
  • Barja, Sara
  • Giménez, Sixto
  • Arbiol, Jordi
  • López, Núria
  • Pelayo García de Arquer, F.
The functions of electrochemical energy conversion and storage devices rely on the dynamic junction between a solid and a fluid: the electrochemical interface (EI). Many experimental techniques have been developed to probe the EI, but they provide only a partial picture. Building a full mechanistic understanding requires combining multiple probes, either successively or simultaneously. However, such combinations lead to important technical and theoretical challenges. In this Review, we focus on complementary optoelectronic probes and modelling to address the EI across different timescales and spatial scales — including mapping surface reconstruction, reactants and reaction modulators during operation. We discuss how combining these probes can facilitate a predictive design of the EI when closely integrated with theory., The authors thank the following projects for support: RED2022-134508-T, PID2021-124796OB-I00, PID2020-116093RB-C41, PID2020-116093RB-C43 and PID2020-116093RB-C44, funded by MCIN/AEI. The Institut de Ciències Fotòniques (ICFO) acknowledges CEX2019-000910-S, Fundació Cellex, Fundació Mir-Puig and the La Caixa Foundation (100010434, EU Horizon 2020 Marie Skłodowska-Curie grant agreement 847648). The Institute of Chemical Research of Catalonia (ICIQ) acknowledges support from the Ministerio de Ciencia e Innovación through the ‘Severo Ochoa’ Excellence Accreditation CEX2021-001214-S. D.E. acknowledges funding from PID2019-108532GB-I00, PID2022-136961NB-I00, QUIMTRONIC-CM Y2018/NMT-4783, the European Union NextGenerationEU (PRTR-C17.I1) (MAD2D-CM)-MRR project, and ERC CoG 766555. IMDEA Nanoscience acknowledges support from the ‘Severo Ochoa’ Program for Centers of Excellence in R&D (CEX2020-001039-S). The Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges support from MCIN/AEI for CEX2021-001214-S, NextGenerationEU (PRTR-C17.I1) PID2020-116093RB-C41 and PID2020-116093RB-C43, and the Generalitat de Catalunya for 2021SGR00457 and PRTR-C17.I1. S.B. acknowledges support from the grants RYC-2017-21931 and EUR2020-112066 funded by MCIN/AEI, from ESF Investing in your future, from the European Union NextGenerationEU/PRTR, and from the Basque Government (grant IT1591-22). ICFO, ICIQ and ICN2 are funded by CERCA — Generalitat de Catalunya. Z.L. and N.L. acknowledge support from Marie Skłodowska-Curie grant agreement number 101064867, the Spanish Ministry of Science and Innovation (PID2021-122516OB-I00 and the ‘Severo Ochoa’ Program for Centers of Excellence CEX2019-000925-S). E.P. acknowledges the support of the CNRS and the French Agence Nationale de la Recherche (ANR), under grant ANR-22-CPJ2-0053-01., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000910-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000925-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water-hydroxide trapping in cobalt tungstate for proton exchange membrane water electrolysis

  • Ram, Ranit
  • Xia, Lu
  • Benzidi, Hind
  • Guha, Anku
  • Golovanova, Viktoria
  • Garzón Manjón, Alba
  • Llorens Rauret, David
  • Sanz Berman, Pol
  • Dimitropoulos, Marinos
  • Mundet, Bernat
  • Pastor, Ernest
  • Celorrio, Veronica
  • Mesa, Camilo A.
  • Das, Aparna M.
  • Pinilla-Sánchez, Adrián
  • Giménez, Sixto
  • Arbiol, Jordi
  • López, Núria
  • García de Arquer, F. Pelayo
A dataset collection of computational results is available in an ioChem-BD repository. STEM and XRD data files are available on Zenodo., The oxygen evolution reaction is the bottleneck to energy-efficient water-based electrolysis for the production of hydrogen and other solar fuels. In proton exchange membrane water electrolysis (PEMWE), precious metals have generally been necessary for the stable catalysis of this reaction. In this work, we report that delamination of cobalt tungstate enables high activity and durability through the stabilization of oxide and water-hydroxide networks of the lattice defects in acid. The resulting catalysts achieve lower overpotentials, a current density of 1.8 amperes per square centimeter at 2 volts, and stable operation up to 1 ampere per square centimeter in a PEMWE system at industrial conditions (80°C) at 1.77 volts; a threefold improvement in activity; and stable operation at 1 ampere per square centimeter over the course of 600 hours., ICFO receives funding from the Fundació Cellex, Fundació Mir-Puig, the La Caixa Foundation (100010434, European Union Horizon 2020 Marie Skłodowska-Curie grant agreement 847648), and the 2022 Leonardo Grant for Researchers in Physics from the BBVA Foundation. The ICIQ receives funding from the Spanish Ministry of Science and Innovation (ref. no. PID2021-122516OB-I00), and the Barcelona Supercomputing Center (BSC-RES) is acknowledged for providing computational resources. ICN2 receives funding from Generalitat de Catalunya through 2021SGR00457, IU16-014206 (METCAM-FIB); the Advanced Materials program supported by the MCIN with European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya funds; NANOGEN (PID2020-116093RB-C43) and RED2022-134508-T (CAT&SCALE), funded by MCIN/AEI/10.13039/501100011033/; and “ERDF A way of making Europe,” by the European Union. A.G.M. acknowledges grant RYC2021 - 033479. The authors acknowledge the use of instrumentation and advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and the Diamond Light Source for access to the B18 and I18 beamlines. ICFO (CEX2019-000910-S), ICIQ (CEX2019-000925-S), and ICN2 (CEX2021-001214-S) receive Severo Ochoa Center of Excellence (MCIN/AEI/10.13039/501100011033) funding and funding from CERCA and Generalitat de Catalunya. S.G. acknowledges PID2020-116093RB-C41 funded by MCIN/AEI/10.13039/501100011033. C.A.M. thanks the Generalitat Valenciana (APOSTD/2021/251) and the MinCiencias Colombia through the Fondo Nacional de Financiamiento para la Ciencia, la Tecnología y la Innovación “Francisco José de Caldas,” call 848-2019. E.P. acknowledges support from the CNRS and the French Agence Nationale de la Recherche (ANR), under grant ANR-22-CPJ2-0053-01. This work was funded/cofunded by the European Union (ERC, PhotoDefect, 101076203). Views and opinions expressed are those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000910-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2019-000925-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid carbon nitride/cobalt phthalocyanine nanocomposites for efficient photocatalytic hydrogen generation

  • Arumugam, Lakshman Sundar
  • Durantini, Javier E.
  • Follana-Berná, Jorge
  • Schiller, Frederik
  • Etxebarria, Ane
  • Forzanini, Lorenzo
  • Barja, Sara
  • Sastre-Santos, Ángela
  • Giménez, Sixto
The photocatalytic production of hydrogen stands out as a promising strategy to convert and store solar energy as chemical energy in the form of a sustainable energy carrier. In the present study, a hybrid photocatalyst based on cobalt phthalocyanine (CoPc) coupled with polymeric carbon nitride (CN) is synthesized using a simple, cost-effective, and upscalable method. Both components are held together in the hybrid nanocomposite via π–π interactions, as shown by detailed structural and optical characterization. The synergistic interaction between both components, CN, a metal-free semiconductor, valued for its stability and tunable electronic properties, and CoPc, known for its excellent light absorption and electronic properties, is evidenced in a proof-of-concept photocatalytic reaction: the photo-oxidation of benzyl alcohol (BzOH) to benzaldehyde (BzO). Chemical trapping reagents were employed to elucidate the reaction mechanism, showing favorable recombination dynamics of the hybrid photocatalyst (CoPc/CN) compared to the individual components. Furthermore, photocatalytic hydrogen production was conducted in an aqueous solution using triethanolamine (TEOA) as an electron donor, with the optimized CoPc/CN nanocomposite producing 1136.5 μmol h–1 gcat–1 of H2, achieving a 50% higher hydrogen yield compared to pristine CN. These results contribute to the design of high-performance photocatalytic materials for promising solar-to-X transformations., The authors acknowledge support from the projects (RED2022-134508-T, PID2023-152771OB-I00, PID2023-149158OB-C44), funded by MCIN/AEI/10.13039/501100011033/, by “ERDF: A way of making Europe”, and by the “European Union” and the Generalitat Valenciana (CIPROM/2021/059 and MFA/2022/028). The MFA projects are part of the Advanced Materials program supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat Valenciana. We are also grateful to the Serveis Centrals d’Instrumentació Científica from the Universitat Jaume I (SCIC-UJI) for providing all the characterization facilities. S.B. acknowledges support from the European Union ERC Starting Grant COSAS (Grant #101040193). J.E.D. is grateful to the Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) of Argentina for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting high-loading zinc-ion battery performance: Zn-Doped δ-MnO2 cathodes to promote Zn2+ storage

  • Chacón-Borrero, Jesús
  • Chang, Xingqi
  • Min, Zhiwen
  • Yu, Jing
  • Montaña-Mora, Guillem
  • Mejia-Centeno, Karol V.
  • Sun, Yuanmiao
  • Zhou, Xiaolong
  • Tunmee, Sarayut
  • Kidkhunthod, Pinit
  • Li, Junshan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
Rechargeable aqueous zinc-ion batteries (AZIBs) have emerged as a leading contender for stationary energy storage systems due to their low cost, safety, and environmental sustainability. However, their widespread practical application is hindered by the limited stability and capacity of current AZIB cathodes, such as manganese oxide (MnO<inf>2</inf>), which affects their long-term cost-effectiveness. To overcome this limitation, we introduce zinc (Zn) doping in δ-MnO<inf>2</inf>, which modulates the electronic states of Mn atoms, suppresses Jahn–Teller distortion, and enhances structural stability. Additionally, the use of a binder-free, self-supported porous electrode without current collectors facilitates three-dimensional ion diffusion, further improving electrochemical performance. As a result, the assembled AZIBs demonstrate outstanding rate capability, delivering 440 mAh∙g<sup>-1</sup> at 0.2 A∙g<sup>-1</sup> and retaining 118 mAh∙g<sup>-1</sup> at 24 A∙g<sup>-1</sup> for Zn-doped δ-MnO<inf>2</inf>, outperforming the bare δ-MnO<inf>2</inf> with 356 mAh∙g<sup>-1</sup> at 0.2 A∙g<sup>-1</sup> and 80 mAh∙g<sup>-1</sup> at 24 A∙g<sup>-1</sup>. Additionally, the Zn-doped δ-MnO<inf>2</inf> exhibits excellent cycling performance with ∼100 % capacity retention after 6000 cycles at 150 mAh∙g<sup>-1</sup> at 10 A∙g<sup>-1</sup>. Furthermore, Zn-doped MnO<inf>2</inf> electrodes integrated with carbon nanotubes achieve a high capacity of ∼210 mAh∙g<sup>-1</sup>, even at an ultrahigh mass loading (∼20 mg∙cm<sup>-2</sup>) at 0.6 mA∙g<sup>-1</sup>. While energy storage in MnO<inf>2</inf> involves the reaction and insertion of H<sup>+</sup>, Mn<sup>2+</sup>, and Zn<sup>2+</sup> cations, density functional theory calculations reveal that Zn intercalation is the dominant storage mechanism in these cells. Overall, this study highlights the potential of Zn-doped MnO<inf>2</inf> cathodes as a promising strategy for advancing the stability, capacity, and rate performance of next-generation AZIBs., This work was supported by the project SyDECat (PID2022–136883OB-C22), financed by the Spanish MCIN/AEI, EHAWEDRY (964524), financed by European EXCELLENT SCIENCE – Further and Emerging Technologies, the National Natural Science Foundation of China (52272054, 52125105, 52061160484, 51972329), Natural Science Foundation of Guangdong Province (2019TX05L389, 2022A1515011365), Shenzhen Science and Technology Planning Project (GJHZ20220913142809019, JCYJ20200109115624923), and the Foundation of the National Research Council of Thailand (N42A650253). Thanks to the China Scholarship Council (CSC) for the scholarship support. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya (In-CAEM Project). The authors thank support from the project AMaDE (PID2023–149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Grant RED2022–134508-T (CAT&SCALE) funded by MCIN/AEI /10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. The authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). ICN2 acknowledges funding from Grant IU16–014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is a founding member of e-DREAM. [59] J.L. is a Serra Húnter Fellow and is grateful to the ICREA Academia program and projects MCIN/FEDER PID2021–124572OB-C31, CEX2023–001300-M, and GC 2021 SGR 01061., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023–001300-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous-flow synthesis of BiVO4 nanoparticles: From laboratory scale to practical systems

  • Robles, Christian
  • Montañés, Laura
  • Mesa, Camilo A.
  • Iglesias, Diego
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Redondo, Jesús
  • Schiller, Frederik
  • Barja, Sara
  • Julián-López, Beatriz
  • Gutiérrez-Blanco, Ana
  • Sans, Víctor
  • Giménez, Sixto
Cost-effective and efficient photoelectrochemical (PEC) water splitting stands out as one of the most promising strategies to address sustainable energy supply in the form of green H2. Large-area photoelectrodes featuring precise chemical and morphological control are key components for a practical solar-to-hydrogen conversion. Herein, we report the continuous flow synthesis of BiVO4 nanoparticles (NPs) by using a simple microreactor configuration. The solution containing the as-prepared NPs enables the deposition of BiVO4 photoanodes with areas up to 52 cm2 through a simple and scalable chemical bath deposition method. On the other hand, surface protection by an ultrathin Al2O3 overlayer grown by atomic layer deposition (ALD) increases the performance of the 1 cm2 BiVO4 photoanodes ~30 %, exhibiting a photocurrent density of ~2.0 mA⋅cm-2 at 1.23 V vs. the Reversible Hydrogen Electrode in the presence of a sacrificial hole scavenger. The optimized continuous flow synthesis provides an affordable methodology for the fabrication of cost-effective, large-scale photoanodes, which could potentially be applied for different photoelectrochemical reactions., We gratefully acknowledge the financial support from the European Commission associated to the European project “SUN2CHEM”, through the Grant Agreement 884444. The authors thank support from the projects (RED2022–134508-T, PID2020–116093RB−C41; PID2020–116093RB−C43 and PID2020–116093RB−C44), funded by MICIU/ AEI/10.13039/501100011033/ . A.G.B wants to acknowledge the Ministerio de Universidades, supported by the Margarita Salas postdoctoral contract MGS/2022/02(UP2021–021) financed by the European Union-NextGenerationEU and also gratefully acknowledge financial support from the Universitat Jaume I (UJI-2023–15). C.R. and S.G. acknowledge the Universitat Jaume I for the project UJI−B2020–50. C.R. also acknowledges the Ministerio de Ciencia e Innovación under the projects PRE2021–098790 and PID2020–116093RB−C41 founded by MCIN/AEI/10.13039/501100011033 and FSE+. C.A.M. acknowledges the Generalitat Valenciana for the APOSTD/2021/251 fellowship and MinCiencias Colombia through the Fondo Nacional de financiamiento para la ciencia, la tecnología y la innovación “Francisco José de Caldas”, call 848e2019 for funding. We are also grateful to the Serveis Centrals d′Instrumentació Científica from the Universitat Jaume I (SCIC-UJI) for providing all the characterization facilities. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR−C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 acknowledges funding from Grant IU16–014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM.76 S.B. acknowledges Grant RYC-2017–21931 funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. J.R. acknowledges the Czech Science Foundation and funding from PIF outgoing project number 22–18079O. F.S. acknowledges the Diputación Foral de Gipuzkoa for partial support through PEMA project within Gipuzkoa Next program., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical transformation of copper sulfide electrodes for selective CO2-to-formate conversion

  • Fernández-Climent, Roser
  • Giusi, Daniele
  • Miceli, Matteo
  • Mesa, Camilo A.
  • Gutiérrez-Blanco, Ana
  • Li, Junnan
  • Redondo, Jesús
  • Schiller, Frederik
  • Barja, Sara
  • Celorrio, Veronica
  • Kornienko, Nikolay
  • Ampelli, Claudio
  • Giménez, Sixto
The data that support the findings of this study are available from the corresponding author upon reasonable request., Precise control over the dynamic transformations that electrocatalysts undergo under operating conditions offers a powerful strategy for tailoring catalytic selectivity. Herein, the electrochemical modification of Cu2−xS-derived catalysts to generate selective active sites for the electroreduction of CO2 to formate is investigated. Through a combination of in situ and ex situ characterization techniques, it is demonstrated that electrochemical cycling induces sulfur leaching, resulting in the formation of reduced, amorphous copper structures that exhibit enhanced selectivity toward formate production. Compared to the pristine material, the electrochemically modified catalyst achieves a twofold improvement in Faradaic efficiency, reaching values as high as 75% for CO2-to-formate conversion. These findings not only establish a cost-effective and scalable platform for catalyst fabrication and activation, but also open new avenues for advancing sustainable CO2 conversion technologies toward industrial implementation., The authors thank the support from the projects (RED2022-134508-T, PID2023-152771OB-I00, PID2023-149158OB-C44), funded by MICIU/AEI/10.13039/501100011033/, by “ERDF A way of making Europe.” S.B. and F.S. thank Basque Government (IT-1591-22). J.R. acknowledges the Czech Science Foundation and funding from PIF outgoing project number 22-18079O. The authors are also grateful to the Serveis Centrals d’Instrumentació Científica from the Universitat Jaume I (SCIC-UJI) for providing all the characterization facilities. D.G., M.M., and C.A. also acknowledge support from the H2020 Project SUPERVAL (ID: 101115456), funded by the European Union, and from the PRIN Project HYDREAM (ID: 2022YXHXH5ID), funded by the Italian MUR. The authors also thank Diamond light source for providing beamtime with experiment reference SP36993., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-pot fabrication of GA-functionalized Cu-nanoparticles by pulsed laser ablation for electrochemical biosensors development

  • Iacono, Valentina
  • Rabelo Freitas, Helena
  • Pulvirenti, Luca
  • Piper, Andrew
  • Merkoçi, Arben
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Ruffino, Francesco
  • Mirabella, Salvo
Functionalized nanoparticles (NPs) are widely used in nanobiosensor fabrication providing improved selectivity and good conductivity. Synthesis of functional nanomaterials is often costly and typically requires several functionalization steps. In this work, we used Pulsed Laser Ablation in Liquids (PLAL) to synthetize and functionalize at the same time copper (Cu) NPs with glutamic acid (GA). A Cu target immersed in a GA solution and hit by a laser led to Cu ablation, NP formation and amine groups bonding at the NPs surface. The GA-functionalized Cu NPs were immobilized onto an electrode and linked to antibodies for alpha-synuclein protein. A successful protein detection was achieved through electrochemical impedance spectroscopy (EIS) measurements at concentration in the pg/mL range. A careful optimization of NP synthesis showed an improved experimental LoD (10 pg/mL) by varying the amount of GA- Cu NPs and the PLAL environment, demonstrating this one-pot fabrication of GA-functionalised Cu-nanoparticles by PLAL as a valuable method for high sensitivity electrochemical sensing electrode., This work has been partially funded by European Union (NextGeneration EU), through the MUR-PNRR project SAMOTHRACE (Grant No. ECS00000022). The authors thank the Bio-nanotech Research and Innovation Tower (BRIT) laboratory of the University of Catania for the PHI Versa Probe XPS facility and Prof. G. G. Condorelli (University of Catania) for XPS measurements provided. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. The authors thank support from the project AMaDE (PID2023-149158OB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. Grant RED2022-134508-T (CAT&SCALE) funded by MCIN/AEI /10.13039/501100011033. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 is founding member of e-DREAM ​[59]. Partially funded also by the European Union as part of the Horizon Europe call HORIZON-INFRA-2021-SERV-01 under grant agreement number 101058414 and co-funded by (UKRI) under the UK government’s Horizon Europe funding guarantee (grant number 10039728) and by the Swiss State Secretariat for Education, Research and Innovation (SERI) under contract number 22.00187. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the UK Science and Technology Facilities Council or the Swiss State Secretariat for Education, Research and Innovation (SERI). Neither the European Union nor the granting authorities can be held responsible for them., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-Step Synthesis of Highly Active and Conductive Transition Metal Nitride for Oxygen Evolution in Alkaline Anion Exchange Membrane Electrolysis

  • Folkman, Scott J.
  • Gelmetti, Ilario
  • Giancola, Stefano
  • Garcés-Pineda, Felipe A.
  • Spadaro, Maria Chiara
  • Muñoz, Andrés Camilo
  • Wickramasinghe, Tharaka
  • Arbiol, Jordi
  • Galán-Mascarós, José Ramón
The kinetic bottleneck of electrocatalytic water splitting is the oxygen evolution reaction (OER). State-of-the-art electrocatalysts for OER include noble metal oxides in acidic electrolytes, as well as non-noble metal oxides in alkaline conditions. Because OER catalyst performance in alkaline anion exchange membrane electrolysis (AEMEL) is limited by the bulk electrical conductivity of the catalyst material, alternatives to metal oxides are desired. This study introduces an efficient single-step synthesis of heterogeneous transition metal nitrides (TMNs) using metal salts in anhydrous NH3, yielding quantitative amounts of the catalyst and volatile byproducts without the necessity for purification steps, while preventing metal-contaminated waste. Extensive characterization of TMNs based on Co, Ni, and Fe demonstratess that such mixed metal nitrides particles with partially oxidized surface outperform benchmark catalysts IrOx and NiCoFeOx in a three-electrode configuration, exhibiting optimum performance for the Co57Ni14Fe29Nx composition. When incorporated onto gas diffusion electrodes in a 5 cm2 AEMEL electrolyzer, Co57Ni14Fe29Nx achieved a cell potential of 2.05 V at 1Acm−2, with sustained stability for more than 240 h of continuous electrolysis. The one-step synthesis of high-performing TMNs marks a pivotal step in sustainable hydrogen production, heralding them as impactful alternatives to metal oxides for bolstering green energy technologies., The authors acknowledge the financial support from MICIU/AEI /10.13039/501100011033 through projects PID2021-124796OB-I00, PID2020-116093RB-C43, PID2023-149158OB-C43 and RED2022-134508-T; and from the Generalitat de Catalunya (2021-SGR-1154 and 2021-SGR00457). ICIQ and ICN2 are supported by the MICIU/AEI /10.13039/501100011033 through the Severo Ochoa Excellence Accreditations CEX2024-001469-S and CEX2021-001214-S; and by the CERCA Programme/Generalitat de Catalunya. S.J.F. acknowledges Marie Skłodowska-Curie Actions grant agreement 895296 (IF- 2019). We acknowledge Matthew Mehmet Crawford from the Fuel Cell Store for many helpful discussions regarding the fabrication of the MEA. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.11) and by the Generalitat de Catalunya. ICN2 is founding member of e-DREAM. (46), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2024-001469-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly Durable Nanoporous CuS Films for Efficient Hydrogen Evolution Electrocatalysis under Mild pH Conditions

  • Fernández-Climent, Roser
  • Redondo, Jesús
  • García-Tecedor, Miguel|||0000-0002-9664-4665
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Li, Junnan
  • Chartrand, Daniel
  • Schiller, Frederik|||0000-0003-1727-3542
  • Pazos, Jhon
  • Hurtado, Mikel F.
  • de la Peña O'Shea, Victor|||0000-0001-5762-4787
  • Kornienko, Nikolay|||0000-0001-7193-2428
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Barja, Sara|||0000-0002-4257-2651
  • Mesa, Camilo A.|||0000-0002-8450-2563
  • Giménez, Sixto|||0000-0002-4522-3174
Copper-based hydrogen evolution electrocatalysts are promising materials to scale-up hydrogen production due to their reported high current densities; however, electrode durability remains a challenge. Here, we report a facile, cost-effective, and scalable synthetic route to produce CuS electrocatalysts, exhibiting hydrogen evolution rates that increase for ∼1 month of operation. Our CuS electrodes reach a state-of-the-art performance of ∼400 mA cm -2 at -1 V vs RHE under mild conditions (pH 8.6), with almost 100% Faradaic efficiency for hydrogen evolution. The rise in current density was found to scale with the electrode electrochemically active surface area. The increased performance of our CuS electrodes correlates with a decrease in the Tafel slope, while analyses by X-ray photoemission spectroscopy, operando X-ray diffraction, and in situ spectroelectrochemistry cooperatively revealed the Cu-centered nature of the catalytically active species. These results allowed us to increase fundamental understanding of heterogeneous electrocatalyst transformation and consequent structure-activity relationship. This facile synthesis of highly durable and efficient CuS electrocatalysts enables the development of competitive electrodes for hydrogen evolution under mild pH conditions.