Pasar al contenido principal

DISEÑO EN SUPERFICIES Y PROPIEDADES FISICO-QUIMICAS DE POLIMEROS PI-CONJUGADOS

PID2019-108532GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION IMDEA NANOCIENCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Coronene-Based 2D Networks by On-Surface Skeletal Rearrangement of Sumanene Precursors

  • Pérez-Elvira, Elena
  • Barragán, Ana
  • Gallardo, Aurelio
  • Santos Barahona, José Manuel
  • Martín-Fuentes, Cristina
  • Lauwaet, Koen
  • Gallego, José M.
  • Miranda, Rodolfo
  • Sakurai, Hidehiro
  • Urgel, José I.
  • Björk, Jonas
  • Martín León, Nazario
  • Écija, David
The design of novel low-dimensional carbon materials is at the forefront of modern chemistry. Recently, on-surface covalent synthesis has emerged as a powerful strategy to synthesize previously precluded compounds and polymers. Here, we report a scanning probe microscopy study, complemented by theoretical calculations, on the sequential skeletal rearrangement of sumanene-based precursors into a coronene-based organometallic network by stepwise intra- and inter-molecular reactions on Au(111). Interestingly, upon higher annealing, the formed organometallic networks evolve into two-dimensional coronene-based covalently linked patches through intermolecular homocoupling reactions. A new reaction mechanism is proposed based on the role of C−Au−C motifs to promote two stepwise carbon-carbon couplings to form cyclobutadiene bridges. Our results pave avenues for the conversion of molecular precursors on surfaces, affording the design of unexplored two-dimensional organometallic and covalent materials.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Complementary probes for the electrochemical interface

  • Pastor, Ernest
  • Lian, Zan
  • Écija, David
  • Galán-Mascarós, José Ramón
  • Barja, Sara
  • Giménez, Sixto
  • Arbiol, Jordi
  • López, Núria
  • Pelayo García de Arquer, F.
The functions of electrochemical energy conversion and storage devices rely on the dynamic junction between a solid and a fluid: the electrochemical interface (EI). Many experimental techniques have been developed to probe the EI, but they provide only a partial picture. Building a full mechanistic understanding requires combining multiple probes, either successively or simultaneously. However, such combinations lead to important technical and theoretical challenges. In this Review, we focus on complementary optoelectronic probes and modelling to address the EI across different timescales and spatial scales — including mapping surface reconstruction, reactants and reaction modulators during operation. We discuss how combining these probes can facilitate a predictive design of the EI when closely integrated with theory., The authors thank the following projects for support: RED2022-134508-T, PID2021-124796OB-I00, PID2020-116093RB-C41, PID2020-116093RB-C43 and PID2020-116093RB-C44, funded by MCIN/AEI. The Institut de Ciències Fotòniques (ICFO) acknowledges CEX2019-000910-S, Fundació Cellex, Fundació Mir-Puig and the La Caixa Foundation (100010434, EU Horizon 2020 Marie Skłodowska-Curie grant agreement 847648). The Institute of Chemical Research of Catalonia (ICIQ) acknowledges support from the Ministerio de Ciencia e Innovación through the ‘Severo Ochoa’ Excellence Accreditation CEX2021-001214-S. D.E. acknowledges funding from PID2019-108532GB-I00, PID2022-136961NB-I00, QUIMTRONIC-CM Y2018/NMT-4783, the European Union NextGenerationEU (PRTR-C17.I1) (MAD2D-CM)-MRR project, and ERC CoG 766555. IMDEA Nanoscience acknowledges support from the ‘Severo Ochoa’ Program for Centers of Excellence in R&D (CEX2020-001039-S). The Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges support from MCIN/AEI for CEX2021-001214-S, NextGenerationEU (PRTR-C17.I1) PID2020-116093RB-C41 and PID2020-116093RB-C43, and the Generalitat de Catalunya for 2021SGR00457 and PRTR-C17.I1. S.B. acknowledges support from the grants RYC-2017-21931 and EUR2020-112066 funded by MCIN/AEI, from ESF Investing in your future, from the European Union NextGenerationEU/PRTR, and from the Basque Government (grant IT1591-22). ICFO, ICIQ and ICN2 are funded by CERCA — Generalitat de Catalunya. Z.L. and N.L. acknowledge support from Marie Skłodowska-Curie grant agreement number 101064867, the Spanish Ministry of Science and Innovation (PID2021-122516OB-I00 and the ‘Severo Ochoa’ Program for Centers of Excellence CEX2019-000925-S). E.P. acknowledges the support of the CNRS and the French Agence Nationale de la Recherche (ANR), under grant ANR-22-CPJ2-0053-01., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000910-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000925-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generating antiaromaticity in polycyclic conjugated hydrocarbons by thermally selective skeletal rearrangements at interfaces

  • Pérez-Elvira, E.
  • Barragán, Ana
  • Chen, Q.
  • Soler-Polo, D.
  • Sánchez-Grande, A.
  • Vicent, D.J.
  • Lauwaet, K.
  • Santos, J.
  • Mutombo, P.
  • Mendieta-Moreno, Jesús I.
  • de la Torre, B.
  • Gallego, José M.
  • Miranda, R.
  • Martín, N.
  • Jelínek, P.
  • Urgel, J.I.
  • Écija, David
Antiaromatic polycyclic conjugated hydrocarbons (PCHs) are attractive research targets because of their interesting structural, electronic and magnetic properties. Unlike aromatic compounds, the synthesis of antiaromatic PCHs is challenging because of their high reactivity and lack of stability, which stems from the small energy gap between their highest occupied and lowest unoccupied molecular orbitals. Here we describe a strategy for the introduction of antiaromatic units in PCHs via thermally selective intra- and intermolecular ring-rearrangement reactions of dibromomethylene-functionalized molecular precursors upon sublimation on a hot Au(111) metal surface, not available in solution chemistry. The synthetic value of these reactions is proven by the integration of pentalene segments into acene-based precursors, which undergo intramolecular ring rearrangement, and the formation of π-conjugated ladder polymers, linked through cyclobutadiene connections, due to ring-rearrangement and homocoupling reactions of indenofluorene-based precursors. The reaction products are investigated by scanning tunnelling microscopy and non-contact atomic force microscopy, and mechanistic insights are unveiled by computational studies. [Figure not available: see fulltext.] © 2023, The Author(s), under exclusive licence to Springer Nature Limited., This project has received funding from Comunidad de Madrid (projects QUIMTRONIC-CM (Y2018/NMT-4783) and NanoMagCost (P2018/NMT-4321)), an ERC Consolidator Grant (ELECNANO, 766555), ERC (SyG TOMATTO ERC-2020-951224) and Ministerio de Ciencia, Innovacion y Universidades (projects SpOrQuMat (PGC2018-098613-B-C21), CTQ2017-83531-R, PID2019-108532GB-I00, PID2020-114653RB-I00 and CTQ2016-81911-REDT). We acknowledge the support from the ‘(MAD2D-CM)-UCM’ and the ‘(MAD2D-CM)-IMDEA-Nanociencia’ projects funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. IMDEA Nanociencia is appreciative of support from the ‘Severo Ochoa’ Programme for Centers of Excellence in R&D (MINECO, grant nos. SEV-2016-0686 and CEX2020-001039-S). Q.C., D.S.-P. and P.J. acknowledge funding support from the CzechNanoLab Research Infrastructure supported by MEYS CR (LM2023051) and GACR project no. 20-13692X. Computational resources were provided by the e-INFRA CZ project (ID 90140), supported by the Ministry of Education, Youth and Sports of the Czech Republic. A.S.-G. acknowledges funding from the ‘Ministerio de Universidades’ for the ‘Plan de Recuperación, Transformación y Resiliencia’ under Margarita Salas grant agreement CA1/RSUE/2021-00369. J.I.U. acknowledges the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie grant agreement no. 886314. We acknowledge B. Cirera for fruitful discussions., The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request. The Fireball software package is available 458 at: https://github.com/fireball-QMD and PP-SPM software package can be downloaded at: https://github.com/Probe-Particle/ppafm#probe-particle-model., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and Characterization of peri-Heptacene on a Metallic Surface

  • Biswas, Kalyan
  • Urgel, José I.
  • Ajayakumar, M.R.
  • Ma, Ji
  • Sánchez-Grande, Ana
  • Edalatmanesh, Shayan
  • Lauwaet, Koen
  • Mutombo, Pingo
  • Gallego, José M.
  • Miranda, Rodolfo
  • Jelínek, Pavel
  • Feng, Xinliang
  • Écija, David
The synthesis of long n-peri-acenes (n-PAs) is challenging as a result of their inherent open-shell radical character, which arises from the presence of parallel zigzag edges beyond a certain n value. They are considered as π-electron model systems to study magnetism in graphene nanostructures; being potential candidates in the fabrication of optoelectronic and spintronic devices. Here, we report the on-surface formation of the largest pristine member of the n-PA family, i.e. peri-heptacene (n=7, 7-PA), obtained on an Au(111) substrate under ultra-high vacuum conditions. Our high-resolution scanning tunneling microscopy investigations, complemented by theoretical simulations, provide insight into the chemical structure of this previously elusive compound. In addition, scanning tunneling spectroscopy reveals the antiferromagnetic open-shell singlet ground state of 7-PA, exhibiting singlet–triplet spin-flip inelastic excitations with an effective exchange coupling (Jeff) of 49 meV. © 2022 Wiley-VCH GmbH., This project has received funding from Comunidad de Madrid [projects QUIMTRONIC-CM (Y2018/NMT-4783), MAD2D,and NanoMagCost (P2018/NMT-4321)], ERC ConsolidatorGrant (ELECNANO, 766555), and Ministerio de Ciencia,Innovacion y Universidades (projects SpOrQuMat (PGC2018-098613-B-C21), CTQ2017-83531-R, PID2019-108532GB-I00,and CTQ2016-81911-REDT). IMDEA Nanociencia is appreciative of support from the “Severo Ochoa” Programme forCenters of Excellence in R&D (MINECO, grant SEV-2016-0686). The EU Graphene Flagship (Graphene Core 3,881603), ERC Consolidator Grant (T2DCP, 819698), the German Research Foundation (DFG) within the Cluster ofExcellence “Center for Advancing Electronics Dresden (cfaed)and the DFG-SNSF Research Project (EnhanTopo, No.429265950) are acknowledged for financial support. Weappreciate funding from the Praemium Academie of the Academy of Science of the Czech Republic and the CzechNa-noLab Research Infrastructure supported by MEYS CR(LM2018110). P.J. thanks the support of the GACR 2013692X. J.I.U. acknowledges the European Union’s Horizon2020 research and innovation programme under the MarieSkłodowska-Curie grant agreement No [886314]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-Surface Design of a 2D Cobalt-Organic Network Preserving Large Orbital Magnetic Moment

  • Martín-Fuentes, C.
  • Parreiras, S.O.
  • Urgel, J.I.
  • Rubio-Giménez, V.
  • Muñiz Cano, B.
  • Moreno, D.
  • Lauwaet, K.
  • Valvidares, M.
  • Valbuena, M.A.
  • Gargiani, P.
  • Kuch, W.
  • Camarero, J.
  • Gallego, José M.
  • Miranda, R.
  • Martínez, José I.
  • Martí-Gastaldo, C.
  • Écija, David
The design of antiferromagnetic nanomaterials preserving large orbital magnetic moments is important to protect their functionalities against magnetic perturbations. Here, we exploit an archetype H6HOTP species for conductive metal-organic frameworks to design a Co-HOTP one-atom-thick metal-organic architecture on a Au(111) surface. Our multidisciplinary scanning probe microscopy, X-ray absorption spectroscopy, X-ray linear dichroism, and X-ray magnetic circular dichroism study, combined with density functional theory simulations, reveals the formation of a unique network design based on threefold Co+2 coordination with deprotonated ligands, which displays a large orbital magnetic moment with an orbital to effective spin moment ratio of 0.8, an in-plane easy axis of magnetization, and large magnetic anisotropy. Our simulations suggest an antiferromagnetic ground state, which is compatible with the experimental findings. Such a Co-HOTP metal-organic network exemplifies how on-surface chemistry can enable the design of field-robust antiferromagnetic materials. © 2022 American Chemical Society., This project has received funding from the European ResearchCouncil (ERC, grant 766555) and Marie Sklodowska-CurieActions (MSCA, project 894924) under the European Union’s Horizon 2020 research and innovation program, from Spanish MINECO (MAT2017-85089-C2-1-R, PID2019-108532GB-I00, and PID2020-118117RB-I00), from Comunidad Autónoma de Madrid via “Programa de Investigación Tecnologías”2018 (FOTOART-CM S2018/NMT-4367, NANOMAG-COST-CM S2018/NMT-4321), and the Generalitat Valenci-ana (PROMETEU/2021/054). IMDEA Nanociencia andICMol acknowledge support from the “Severo Ochoa” and“María de Maeztu” Programs for Centers of Excellence in R&D(MINECO, Grant SEV-2016-0686 and CEX2019-000919-M).The ALBA synchrotron is acknowledged for providing beamtime at the BOREAS beamline (proposal number2020094657), The Supporting Information is available free of charge athttps://pubs.acs.org/doi/10.1021/jacs.2c05894.Synthesis of H6HOTP species; experimental methods;theoretical framework and computational details; latticegeometry and crystal field; oxidation state of Co in theCo-HOTP network; calculations of spin quantumnumber; and calculation of the exchange interaction(J) (PDF), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Driving Multi-Step Regioselectivity in On-Surface Polymer Synthesis by Molecular Coverage

  • Biswas, K.
  • García-Frutos, A.
  • Álvarez, B.
  • Santos Lozano, M. Asunción
  • Barragán, A.
  • Janeiro, J.
  • Bello-García, J.
  • Soler-Polo, D.
  • Lauwaet, K.
  • Gallego, José M.
  • Pérez, D.
  • Miranda, R.
  • Urgel, J.I.
  • Jelínek, P.
  • Peña, D.
  • Écija, D.
On-surface synthesis has revolutionized the design of low-dimensional organic nanomaterials, introducing unprecedented families of compounds while offering precise control over their structural and functional properties. A critical challenge in this field is achieving regioselective control over covalent bond formation, which is essential for tailoring polymerization processes. Here, we demonstrate a novel approach toward regioselective polymerization on Au(111) using a dicyclopentaanthracene precursor, an acene derivative that comprise two terminal indene moieties. Through a combination of scanning tunneling microscopy, non-contact atomic force microscopy, and density functional theory calculations, we reveal a molecular coverage-dependent regioselective homocoupling mechanism. At low coverage, one-dimensional polymers formed via indenyl couplings in anti-configuration dominate, involving both five-membered rings of the precursor. Increasing the coverage to half a monolayer shifts the regioselectivity, yielding a quasi-1D staircase polymer through indenyl couplings that engage only one five-membered ring of each precursor. At higher coverages, a two-dimensional porous network emerges, driven by the activation of the four benzylic positions of the molecular precursor. Our findings highlight the ability to steer regioselectivity and, consequently, polymer dimensionality by controlling molecular coverage, significantly advancing the fields of on-surface synthesis and polymer science. © 2025 The Author(s). Angewandte Chemie International Edition published by Wiley-VCH GmbH., This project has received funding from MCIN/AEI/10.13039/501100011033 through grants PID2019-108532GB-I00, PID2022-139933NB-I00, PID2022-140845OB-C62, and PID2023-152793NA-I00. The authors acknowledge the sup-port from ERC SyG MolDAM (951519), and the “(MAD2D-CM)-IMDEA-Nanociencia” project funded by Comunidadde Madrid, by the Recovery, Transformation and ResiliencePlan, and by NextGenerationEU from the EuropeanUnion. The authors thank Comunidad de Madrid throughPrograma de Actividades de I+D (TEC-2024/TEC-459,SYNMOLMAT-CM). The authors appreciate support fromthe European Regional Development Fund of the European Union (EU) and from Xunta de Galicia (Centro de Investigación de Galicia accreditation 2019–2022, ED431G2019/03). A.B. acknowledges financial support from Juan dela Cierva program (FJC2021-046524-I). J.I.U. acknowledgesthe funding from MCIU for the Ramón y Cajal (RYC2022-037352). P.J. and M.L. appreciate financial support from the Czech NanoLab Research Infrastructure supported by MEYSCR (LM2018110) and GACR 23–05486S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stepwise On-Surface Synthesis and Transformations of Two-Dimensional Covalent Organic Frameworks by Controlled Thermal Stimuli

  • Barragán, A.
  • Pérez-Elvira, E.
  • Vicent, D.J.
  • Santos Lozano, M. Asunción
  • Soler-Polo, D.
  • Lauwaet, K.
  • Gallego, José M.
  • Miranda, R.
  • Urgel, José I.
  • Jelínek, P.
  • Martín, N.
  • Écija, Daniel
The development of covalent organic frameworks (COFs) is currently a primary objective in materials science, taking into account the envisioned applications in a variety of fields, including gas and energy storage, sensing, catalysis, and optoelectronics. Recently, the advent of on-surface covalent synthesis has allowed the design of one-atom-thick COFs, although the in situ transformations of such materials at interfaces have remained elusive. In this work, advantage is taken of an ex-professo synthesized molecular precursor endowed with gem-dibromide functional groups and a phenanthroline moiety to exploit steric hindrance as a synthetic controlling concept and, by subsequent chemical coupling reactions through thermal activation, afford COF transformations at interfaces in a controlled stepwise manner. In a first step, 1D covalent molecular chains are formed and self-assembled in a 2D supramolecular network, which, upon annealing, gives rise to a 2D porous organo-metallic network. Further annealing at higher temperatures affords the formation of a 2D-COF comprising linear chains based on ethynylene bridges at the cores of the monomers and carbon-carbon couplings at their peripheries. Such ethynylene linkages are transformed into antiaromatic pentalene moieties upon subsequent annealing, thus exemplifying the conversion of 2D-COFs at interfaces. These results provide new avenues toward the engineering and in situ chemical transformations of 2D-COFs in a stepwise manner, anticipating the tailoring of the structure and electronic properties of monolayer 2D-COFs by thermal stimuli. © 2025 Wiley-VCH GmbH., A.B., E.P.-E., and D.J.V. contributed equally to this work. This project had re-ceived funding from MCIN/AEI/10.13039/501100011033 through grants PID2019-108532GB-I00, PID2023-146373OB-I00 and PDC2023-145871-I00. The authors acknowledged the support from the “(MAD2D-CM)-IMDEA-Nanociencia” and “(MAD2D-CM)-UCM” projects funded by Co-munidad de Madrid, by the Recovery, Transformation and Resilience Plan,and by NextGenerationEU from the European Union. The authors thankedComunidad de Madrid through Programa de Actividades de I+D (TEC-2024/TEC-459, SYNMOLMAT-CM). D.J.V and N.M. also acknowledged fi-nancial support from the ERC (SyG TOMATTO) ERC-2020-951224). Theauthors appreciated funding from the CzechNanoLab Research Infras-tructure supported by MEYS CR (LM2018110) and project GACR no. 23–05486S. J.I.U. acknowledged the funding from MCIU for the Ramón y Cajal(RYC2022-037352). A.B. acknowledged financial support from the Juan dela Cierva program (FJC2021-046524-I, Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Complementary probes for the electrochemical interface

  • Pastor, Ernest|||0000-0001-5334-6855
  • Lian, Zan|||0000-0001-6922-406X
  • Xia, Lu|||0000-0002-2726-5389
  • Ecija, David|||0000-0002-8661-8295
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
  • Barja, Sara|||0000-0002-4257-2651
  • Giménez, Sixto|||0000-0002-4522-3174
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • López, Núria|||0000-0001-9150-5941
  • García de Arquer, F. Pelayo|||0000-0003-2422-6234
The functions of electrochemical energy conversion and storage devices rely on the dynamic junction between a solid and a fluid: the electrochemical interface (EI). Many experimental techniques have been developed to probe the EI, but they provide only a partial picture. Building a full mechanistic understanding requires combining multiple probes, either successively or simultaneously. However, such combinations lead to important technical and theoretical challenges. In this Review, we focus on complementary optoelectronic probes and modelling to address the EI across different timescales and spatial scales - including mapping surface reconstruction, reactants and reaction modulators during operation. We discuss how combining these probes can facilitate a predictive design of the EI when closely integrated with theory.