Pasar al contenido principal

ESTUDIO DE LAS RELACIONES ESTRUCTURA-FUNCION EN CATALIZADOR MODELO PARA LA GENERACION LIMPIA DE PRODUCTOS QUIMICOS DE ALTO VALOR AÑADIDO.

PID2020-116093RB-C44

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The Role of Rare-Earth Atoms in the Anisotropy and Antiferromagnetic Exchange Coupling at a Hybrid Metal-Organic Interface

  • Blanco Rey, Maria|||0000-0002-5189-6690
  • Castrillo-Bodero, Rodrigo|||0000-0003-1800-0415
  • Ali, Khadiza|||0000-0001-5780-477X
  • Gargiani, Pierluigi|||0000-0002-6649-0538
  • Ilyn, Maxim|||0000-0002-4052-7275
  • Gastaldo, Michele|||0000-0002-8900-8257
  • Paradinas, Markos|||0000-0003-1006-9506
  • Valbuena, Miguel Ángel|||0000-0002-0585-5636
  • Mugarza, Aitor|||0000-0002-2698-885X
  • Ortega, José Enrique
  • Schiller, Frederik|||0000-0003-1727-3542
  • Fernandez Gomez-Recuero, Laura|||0000-0002-4818-1125
Magnetic anisotropy and magnetic exchange interactions are crucial parameters that characterize the hybrid metal-organic interface, a key component of an organic spintronic device. It is shown that the incorporation of 4f RE atoms to hybrid metal-organic interfaces of CuPc/REAu2 type (RE = Gd, Ho) constitutes a feasible approach toward on-demand magnetic properties and functionalities. The GdAu2 and HoAu2 substrates differ in their magnetic anisotropy behavior. Remarkably, the HoAu2 surface promotes the inherent out-of-plane anisotropy of CuPc, owing to the match between the anisotropy axis of substrate and molecule. Furthermore, the presence of RE atoms leads to a spontaneous antiferromagnetic exchange coupling at the interface, induced by the 3d-4f superexchange interaction between the unpaired 3d electron of CuPc and the 4f electrons of the RE atoms. It is shown that 4f RE atoms with unquenched quantum orbital momentum (L), as it is the case of Ho, induce an anisotropic interfacial exchange coupling.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Tuning the carrier injection barrier of hybrid metal–organic interfaces on rare earth-gold surface compounds

  • Castrillo Bodero, Rodrigo
  • Blanco Rey, María
  • Ali, Khadiza
  • Ortega Conejero, José Enrique
  • Schiller, Frederik
  • Fernández, Laura
Magnetic hybrid metal–organic interfaces possess a great potential in areas such as organic spintronics and quantum information processing. However, tuning their carrier injection barriers on-demand is fundamental for the implementation in technological devices. We have prepared hybrid metal–organic interfaces by the adsorption of copper phthalocyanine CuPc on REAu2 surfaces (RE = Gd, Ho and Yb) and studied their growth, electrostatics and electronic structure. CuPc exhibits a long-range commensurability and a vacuum level pinning of the molecular energy levels. We observe a significant effect of the RE valence of the substrate on the carrier injection barrier of the hybrid metal–organic interface. CuPc adsorbed on trivalent RE-based surfaces (HoAu2 and GdAu2) exhibits molecular level energies that may allow injection carriers significantly closer to an ambipolar injection behavior than in the divalent case (YbAu2)., This work was financial supported by Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I funded by MCIN/AEI/10.13039/501100011033/ and by “ESF investing in your future”), and the Basque Government (grants No. IT-1591-22, IT-1527-22). L. F. acknowledges funding from the European Union's Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109. Computational resources were provided by DIPC. Part of the research leading to this results has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduced carbon monoxide saturation coverage on vicinal palladium surfaces: the importance of the adsorption site

  • Garcia-Martinez, Fernando
  • Dietze, Elisabeth
  • Schiller, Frederik
  • Gajdek, Dorotea
  • Merte, Lindsay R.
  • Gericke, Sabrina M.
  • Zetterberg, Johan
  • Albertin, Stefano
  • Lundgren, Edvin
  • Grönbeck, Henrik
  • Ortega, J. Enrique
Steps at metal surfaces may influence energetics and kinetics of catalytic reactions in unexpected ways. Here, we report a significant reduction of the CO saturation coverage in Pd vicinal surfaces, which in turn is relevant for the light-off of the CO oxidation reaction. The study is based on a systematic investigation of CO adsorption on vicinal Pd(111) surfaces making use of a curved Pd crystal. A combined X-ray Photoelectron Spectroscopy and DFT analysis allows us to demonstrate that an entire row of atomic sites under Pd steps remains free of CO upon saturation at 300 K, leading to a step-density-dependent reduction of CO coverage that correlates with the observed decrease of the light-off temperature during CO oxidation in vicinal Pd surfaces., We acknowledge financial support from the Spanish Ministry of Science and Innovation (Grants MAT-2017-88374-P, PID2019-107338RB-C63, PID2020-116093RB-C44), the Basque Government (Grants IT-1255-19), the Knut and Alice Wallenberg foundation (DNR KAW 2015.0058 ”Atomistic Design of new Catalysts”), and the Swedish Research Council (DNR 349-2011-6491 “Catalysis on the Atomic Scale”). Financial support is acknowledged from the Swedish Research Council (2016-5234). The DFT calculations were performed at C3SE (Göteborg) via a SNIC grant. We acknowledge MAX IV Laboratory support, in particular Alexei Preobrajenski, for their help in synchrotron experiments, which were carried out at the FlexPES beamline under Proposal 20190717. Research conducted at MAX IV, a Swedish national user facility, is supported by the Swedish Research council under contract 2018-07152, the Swedish Governmental Agency for Innovation Systems under contract 2018-04969, and Formas under contract 2019-02496. Moreover, the research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the valence state on the band magnetocrystalline anisotropy in two-dimensional rare-earth/noble-metal compounds

  • Blanco-Rey, María
  • Castrillo-Bodero, Rodrigo
  • Ali, Khadiza
  • Gargiani, Pierluigi
  • Bertram, Florian
  • Sheverdyaeva, P. M.
  • Ortega, J. Enrique
  • Fernández, Laura
  • Schiller, Frederik
In intermetallic compounds with zero orbital momentum (L=0) the magnetic anisotropy and the electronic band structure are interconnected. Here, we investigate this connection in divalent Eu and trivalent Gd intermetallic compounds. We find by x-ray magnetic circular dichroism an out-of-plane easy magnetization axis in two-dimensional atom-thick EuAu2. Angle-resolved photoemission spectroscopy and density-functional theory prove that this is due to strong f−d band hybridization and Eu2+ valence. In contrast, the easy in-plane magnetization of the structurally equivalent GdAu2 is ruled by spin-orbit-split d bands, notably Weyl nodal lines, occupied in the Gd3+ state. Regardless of the L value, we predict a similar itinerant electron contribution to the anisotropy of analogous compounds., Financial support from Spanish Ministerio de Ciencia e Innovación (projects MAT-2017-88374-P, PID2020116093RB-C44 and PID2019-103910GB-I00 funded by MCIN/AEI/10.13039/501100011033/), the Basque Government (Grants No. IT-1255-19 and No. IT1260-19), and the University of the Basque Country UPV/EHU (Grant No. GIU18/138) is acknowledged. L.F. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable oxygen evolution electrocatalysis in aqueous 1 MH2SO4 with earth abundant nanostructured Co3O4

  • Yu, Jiahao
  • Garcés-Pineda, Felipe A.
  • González-Cobos, Jesús
  • Peña-Díaz, Marina
  • Rogero, Celia
  • Giménez, Sixto
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Barja, Sara
  • Galán-Mascarós, José Ramón
Earth-abundant electrocatalysts for the oxygen evolution reaction (OER) able to work in acidic working conditions are elusive. While many first-row transition metal oxides are competitive in alkaline media, most of them just dissolve or become inactive at high proton concentrations where hydrogen evolution is preferred. Only noble-metal catalysts, such as IrO2, are fast and stable enough in acidic media. Herein, we report the excellent activity and long-term stability of Co3O4-based anodes in 1 M H2SO4 (pH 0.1) when processed in a partially hydrophobic carbon-based protecting matrix. These Co3O4@C composites reliably drive O2 evolution a 10 mA cm–2 current density for >40 h without appearance of performance fatigue, successfully passing benchmarking protocols without incorporating noble metals. Our strategy opens an alternative venue towards fast, energy efficient acid-media water oxidation electrodes., The authors thank the support from projects RED2018-102459-T, RTI2018-095618-B-I00, PID2020-116093RB-C41,C43&C44, PID2019-107338RB-C63 and PID2020-114252GB-I00 funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”; the Generalitat de Catalunya (2017-SGR-1406 and 2017-SGR-327), and the Basque Government (grant IT1591-22). J.Y. thanks the China Scholarship Council (CSC) for predoctoral fellowships (File No. 201806270234). S.B. acknowledges Grant RYC-2017-21931 funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future, and UPV/EHU project EHUrOPE19/01 and IKERBASQUE, Basque Foundation for Science. ICIQ and ICN2 are supported by the Ministerio de Ciencia e Innovación through the Severo Ochoa Excellence Accreditations CEX2019-000925-S (MIC/AEI) and SEV-2017-0706; and by the CERCA Programme/Generalitat de Catalunya. M.C.S. has received funding from the European Union’s Horizon 2020 research and innovation programme under Marie Skodowska-Curie grant 754510 (PROBIST) and the Severo Ochoa programme. M.C.S. has received funding from the postdoctoral fellowship Juan de la Cierva Incorporation from MICINN (JCI-2019) and the Severo Ochoa programme. M.P.D. acknowledges funding for a Ph.D. fellowship from the MPC Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interlayer coupling of a two-dimensional Kondo lattice with a ferromagnetic surface in the antiferromagnet CeCo2P2

  • Poelchen, Georg
  • Rusinov, Igor P.
  • Schulz, Susanne
  • Güttler, Monika
  • Mende, Max
  • Generalov, Alexander
  • Usachov, Dmitry Yu.
  • Danzenbächer, Steffen
  • Hellwig, Johannes
  • Peters, Marius
  • Kliemt, Kristin
  • Kucherenko, Y.
  • Antonov, V. N.
  • Laubschat, Clemens
  • Chulkov, Eugene V.
  • Ernst, Arthur
  • Kummer, Kurt
  • Krellner, Cornelius
  • Vyalikh, Denis V.
The f-driven temperature scales at the surfaces of strongly correlated materials have increasingly come into the focus of research efforts. Here, we unveil the emergence of a two-dimensional Ce Kondo lattice, which couples ferromagnetically to the ordered Co lattice below the P-terminated surface of the antiferromagnet CeCo2P2. In its bulk, Ce is passive and behaves tetravalently. However, because of symmetry breaking and an effective magnetic field caused by an uncompensated ferromagnetic Co layer, the Ce 4f states become partially occupied and spin-polarized near the surface. The momentum-resolved photoemission measurements indicate a strong admixture of the Ce 4f states to the itinerant bands near the Fermi level including surface states that are split by exchange interaction with Co. The temperature-dependent measurements reveal strong changes of the 4f intensity at the Fermi level in accordance with the Kondo scenario. Our findings show how rich and diverse the f-driven properties can be at the surface of materials without f-physics in the bulk., This work was supported by the German Research Foundation (DFG) through Grant Nos. KR3831/5-1, No. LA655/20-1m, Fermi-NEst, GRK1621, TRR288 (No. 422213477) project A03, and SFB1143 (No. 247310070). We acknowledge support from the Spanish Ministry of Science and Innovation (Project No. PID2020-116093RB-C44, funded by MCIN/AEI/10.13039/501100011033). We also acknowledge funding from the Austrian Science Fund (FWF) (Project No. I 5384-N). I.P.R. acknowledges support from the Ministry of Education and Science of the Russian Federation within State Task No. 0721-2020-0033 (in the part of the ab initio surface electronic structure study). D.Yu.U. acknowledges support from the Saint-Petersburg State University (Grant No. ID 90383050). We acknowledge Diamond Light Source for time on Beamline I05 under Proposal SI24339 and the Paul Scherrer Institut, Villigen, Switzerland for provision of synchrotron radiation beamtime at beamline SIS-ULTRA of the SLS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the carrier injection barrier of hybrid metal–organic interfaces on rare earth-gold surface compounds

  • Castrillo-Bodero, Rodrigo
  • Blanco-Rey, María
  • Ali, Khadiza
  • Ortega, J. Enrique
  • Schiller, Frederik
  • Fernández, Laura
Magnetic hybrid metal–organic interfaces possess a great potential in areas such as organic spintronics and quantum information processing. However, tuning their carrier injection barriers on-demand is fundamental for the implementation in technological devices. We have prepared hybrid metal–organic interfaces by the adsorption of copper phthalocyanine CuPc on REAu2 surfaces (RE = Gd, Ho and Yb) and studied their growth, electrostatics and electronic structure. CuPc exhibits a long-range commensurability and a vacuum level pinning of the molecular energy levels. We observe a significant effect of the RE valence of the substrate on the carrier injection barrier of the hybrid metal–organic interface. CuPc adsorbed on trivalent RE-based surfaces (HoAu2 and GdAu2) exhibits molecular level energies that may allow injection carriers significantly closer to an ambipolar injection behavior than in the divalent case (YbAu2)., This work was financial supported by Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I funded by MCIN/AEI/10.13039/501100011033/ and by “ESF investing in your future”), and the Basque Government (grants No. IT-1591-22, IT-1527-22). L. F. acknowledges funding from the European Union's Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109. Computational resources were provided by DIPC. Part of the research leading to this results has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. We further aknowledge Polina M. Sheverdyaeva and Paolo Moras for the assistance in the VUV-Photoemission beam line of Elettra Synchrotron in Trieste., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin-polarizing electron beam splitter from crossed graphene nanoribbons

  • Sanz, Sofía
  • Papior, Nick
  • Giedke, Géza
  • Sánchez-Portal, Daniel
  • Brandbyge, Mads
  • Frederiksen, Thomas
Junctions composed of two crossed graphene nanoribbons (GNRs) have been theoretically proposed as electron beam splitters where incoming electron waves in one GNR can be split coherently into propagating waves in two outgoing terminals with nearly equal amplitude and zero back-scattering. Here we scrutinize this effect for devices composed of narrow zigzag GNRs taking explicitly into account the role of Coulomb repulsion that leads to spin-polarized edge states within mean-field theory. We show that the beam-splitting effect survives the opening of the well-known correlation gap and, more strikingly, that a spin-dependent scattering potential emerges which spin polarizes the transmitted electrons in the two outputs. By studying different ribbons and intersection angles we provide evidence that this is a general feature with edge-polarized nanoribbons. A near-perfect polarization can be achieved by joining several junctions in series. Our findings suggest that GNRs are interesting building blocks in spintronics and quantum technologies with applications for interferometry and entanglement., This work was financial supported by Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I funded by MCIN/AEI/10.13039/501100011033/ and by “ESF investing in your future”), and the Basque Government (grants No. IT-1591-22, IT-1527-22). L. F. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109. Computational resources were provided by DIPC. Part of the research leading to this results has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure matters: Asymmetric CO oxidation at Rh steps with different atomic packing

  • Garcia-Martinez, Fernando
  • Rämisch, Lisa
  • Ali, Khadiza
  • Waluyo, Iradwikanari
  • Castrillo-Bodero, Rodrigo
  • Pfaff, Sebastian
  • Villar-García, Ignacio J.
  • Walter, Andrew Leigh
  • Hunt, Adrian
  • Pérez-Dieste, Virginia
  • Zetterberg, Johan
  • Lundgren, Edvin
  • Schiller, Frederik
  • Ortega, J. Enrique
Curved crystals are a simple but powerful approach to bridge the gap between single crystal surfaces and nanoparticle catalysts, by allowing a rational assessment of the role of active step sites in gas-surface reactions. Using a curved Rh(111) crystal, here, we investigate the effect of A-type (square geometry) and B-type (triangular geometry) atomic packing of steps on the catalytic CO oxidation on Rh at millibar pressures. Imaging the crystal during reaction ignition with laser-induced CO2 fluorescence demonstrates a two-step process, where B-steps ignite at lower temperature than A-steps. Such fundamental dissimilarity is explained in ambient pressure X-ray photoemission (AP-XPS) experiments, which reveal partial CO desorption and oxygen buildup only at B-steps. AP-XPS also proves that A-B step asymmetries extend to the active stage: at A-steps, low-active O–Rh–O trilayers buildup immediately after ignition, while highly active chemisorbed O is the dominant species on B-type steps. We conclude that B-steps are more efficient than A-steps for the CO oxidation., We acknowledge financial support from Grant Nos. PID2020-116093RB-C44 and PID2019-107338RB-C6-3, funded by the Spanish MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, the Basque Government (Grant No. IT-1591-22), Knut and Alice Wallenberg (KAW) project “Atomistic design of new catalysts” (Project No. KAW2015.0058), the Swedish Research Council (Project No. 2018-03434), the Swedish Foundation for Strategic Research (Project No. ITM17-0045), the Å Forsk Foundation, and the Crafoord Foundation. This research used resources of the 23-ID-2 (IOS) beamline of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory, under Contract No. DE-SC0012704. Part of these experiments were performed at Circe beamline at ALBA Synchrotron with the collaboration of ALBA staff., Open Access funding is provided by the University of the Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronic band structure of 1D π-d hybridized narrow-gap metal-organic polymers

  • Frezza, Federico
  • Schiller, Frederik
  • Cahlik, Ales
  • Ortega, J. Enrique
  • Barth, Johannes V.
  • Arnau, Andrés
  • Blanco-Rey, María
  • Jelinek, Pavel
  • Corso, Martina
  • Piquero-Zulaica, Ignacio
One-dimensional (1D) metal–organic (MO) nanowires are captivating from fundamental and technological perspectives due to their distinctive magnetic and electronic properties. The solvent-free synthesis of such nanomaterials on catalytic surfaces provides a unique approach for fabricating low-dimensional single-layer materials with atomic precision and low amount of defects. A detailed understanding of the electronic structure of MO polymers such as band gap and dispersive bands is critical for their prospective implementation into nanodevices such as spin sensors or field-effect transistors. Here, we have performed the on-surface reaction of quinoidal ligands with single cobalt atoms (Co-QDI) on a vicinal Au(788) surface in ultra-high vacuum. This procedure promotes the growth and uniaxial alignment of Co-QDI MO chains along the surface atomic steps, while permitting the mapping of their electronic properties with space-averaging angle-resolved photoemission spectroscopy. In the direction parallel to the principal chain axis, a well-defined 1D band structure with weakly dispersive and dispersive bands is observed, confirming a pronounced electron delocalization. Low-temperature scanning tunneling microscopy/spectroscopy delves into the atomically precise structure of the nanowires and elucidates their narrow bandgap. These findings are supported with GW0 band structure calculations showing that the observed electronic bands emanate from the efficient hybridization of Co(3d) and molecular orbitals. Our work paves the way towards a systematic search of similar 1D π–d hybridized MO chains with tunable electronic and magnetic properties defined by the transition or rare earth metal atom of choice., Financial support was provided from the Spanish Research Council CSIC through I-LINK C20002; grants PID2019-107338RB-C63, PID2019-103910GB-100 and PID2020-116093RB-C44 funded by MCIN/AEI/10.13039/501100011033. We further thank support from the Basque Government, grants IT-1591-22, IT-1527-22, IT-1246-19 and IT-1260-19 as well as Universidad del País Vasco grant GIU18/138., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A ferromagnetic Eu-Pt surface compound grown below hexagonal boron nitride

  • Idris Bakhit, Alaa Mohammed
  • Ali, Khadiza
  • Makarova, Anna A.
  • Píš, Igor
  • Bondino, Federica
  • Sant, Roberto
  • Dash, Saroj P.
  • Castrillo-Bodero, Rodrigo
  • Hasegawa, Yuri
  • Ortega, J. Enrique
  • Fernández, Laura
  • Schiller, Frederik
One of the fundamental applications for monolayer-thick 2D materials is their use as protective layers of metal surfaces and in situ intercalated reactive materials in ambient conditions. Here we investigate the structural, electronic, and magnetic properties, as well as the chemical stability in air of a very reactive metal, Europium, after intercalation between a hexagonal boron nitride (hBN) layer and a Pt substrate. We demonstrate that Eu intercalation leads to a hBN-covered ferromagnetic EuPt2 surface alloy with divalent Eu2+ atoms at the interface. We expose the system to ambient conditions and find a partial conservation of the di-valent signal and hence the Eu–Pt interface. The use of a curved Pt substrate allows us to explore the changes in the Eu valence state and the ambient pressure protection at different substrate planes. The interfacial EuPt2 surface alloy formation remains the same, but the resistance of the protecting hBN layer to ambient conditions is reduced, likely due to a rougher surface and a more discontinuous hBN coating., We acknowledge financial support from grants PID2020-116093RB-C44 funded by the Spanish MCIN/AEI/10.13039/501100011033 and the Basque Government (Grant IT-1591-22) as well as from the German BMBF (grant 05K19KER). We acknowledge the European Synchrotron Radiation Facility for provision of beam time on ID32. ESRF access was provided through proposal MA-5454.76 Part of the research leading to the results has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. Y. H. appreciates the support of Japan Society for the Promotion of Science (JSPS) Overseas Research Fellowships and I. P. and F. B. acknowledge financial support from EUROFEL project (RoadMap Esfri)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly durable nanoporous Cu2-xS films for efficient hydrogen evolution electrocatalysis under mild pH conditions

  • Fernández-Climent, Roser
  • Redondo, Jesús
  • García-Tecedor, Miguel
  • Spadaro, Maria Chiara
  • Li, Junnan
  • Chartrand, Daniel
  • Schiller, Frederik
  • Pazos, Jhon
  • Hurtado, Mikel F.
  • Peña O'Shea, Victor de la
  • Kornienko, Nikolay
  • Arbiol, Jordi
  • Barja, Sara
  • Mesa, Camilo A.
  • Giménez, Sixto
Copper-based hydrogen evolution electrocatalysts are promising materials to scale-up hydrogen production due to their reported high current densities; however, electrode durability remains a challenge. Here, we report a facile, cost-effective, and scalable synthetic route to produce Cu2-xS electrocatalysts, exhibiting hydrogen evolution rates that increase for ∼1 month of operation. Our Cu2-xS electrodes reach a state-of-the-art performance of ∼400 mA cm-2 at -1 V vs RHE under mild conditions (pH 8.6), with almost 100% Faradaic efficiency for hydrogen evolution. The rise in current density was found to scale with the electrode electrochemically active surface area. The increased performance of our Cu2-xS electrodes correlates with a decrease in the Tafel slope, while analyses by X-ray photoemission spectroscopy, operando X-ray diffraction, and in situ spectroelectrochemistry cooperatively revealed the Cu-centered nature of the catalytically active species. These results allowed us to increase fundamental understanding of heterogeneous electrocatalyst transformation and consequent structure-activity relationship. This facile synthesis of highly durable and efficient Cu2-xS electrocatalysts enables the development of competitive electrodes for hydrogen evolution under mild pH conditions., ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), Generalitat de Catalunya, and the Basque Government (grant IT1591-22). The authors thank the support from the projects (RED2022-134508-T, PID2020-116093RB-C41, PID2020-116093RB-C43, and PID2020-116093RB-C44) funded by MCIN/AEI/10.13039/501100011033/ and the project TED2021-129999A-C33 financed by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. C.A.M. acknowledges funding from UJI postdoc fellowship POSDOC/2019/20, the Generalitat Valenciana for the APOSTD/2021/251 fellowship, and to MinCiencias Colombia through the Fondo Nacional de Financiamiento para la Ciencia, la Tecnología y la Innovación “Francisco José de Caldas”, call 848-2019. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. M.C.S. has received funding from the post-doctoral fellowship Juan de la Cierva Incorporation from MICINN (JCI-2019) and the Severo Ochoa programme. S.B. acknowledges grant RYC-2017-21931 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in Your Future, EUR2020-112066 funded by MCIN/AEI /10.13039/501100011033 and by European Union NextGenerationEU/PRTR, and UPV/EHU project EHUrOPE19/01. J.R. acknowledges the Czech Science Foundation and funding from PIF outgoing project number 22-18079O., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-lived spin waves in a metallic antiferromagnet

  • Poelchen, Georg
  • Hellwig, Johannes
  • Peters, Marius
  • Usachov, Dmitry Yu.
  • Kliemt, Kristin
  • Laubschat, Clemens
  • Echenique, Pedro M.
  • Chulkov, Eugene V.
  • Krellner, Cornelius
  • Parkin, S. S. P.
  • Vyalikh, Denis V.
  • Ernst, Arthur
  • Kummer, Kurt
Collective spin excitations in magnetically ordered crystals, called magnons or spin waves, can serve as carriers in novel spintronic devices with ultralow energy consumption. The generation of well-detectable spin flows requires long lifetimes of high-frequency magnons. In general, the lifetime of spin waves in a metal is substantially reduced due to a strong coupling of magnons to the Stoner continuum. This makes metals unattractive for use as components for magnonic devices. Here, we present the metallic antiferromagnet CeCo2P2, which exhibits long-living magnons even in the terahertz (THz) regime. For CeCo2P2, our first-principle calculations predict a suppression of low-energy spin-flip Stoner excitations, which is verified by resonant inelastic X-ray scattering measurements. By comparison to the isostructural compound LaCo2P2, we show how small structural changes can dramatically alter the electronic structure around the Fermi level leading to the classical picture of the strongly damped magnons intrinsic to metallic systems. Our results not only demonstrate that long-lived magnons in the THz regime can exist in bulk metallic systems, but they also open a path for an efficient search for metallic magnetic systems in which undamped THz magnons can be excited., This work was supported by the German Research Foundation (DFG) through Grants No. KR3831/5-1, No. LA655/20-1m, Fermi-NEst, GRK1621, TRR288 (No. 422213477) project A03, and SFB1143 (No. 247310070). D.V.V. acknowledges support from the Spanish Ministry of Science and Innovation, project PID2020-116093RB-C44, funded by MCIN/AEI/10.13039/ 501100011033. A.E. acknowledges funding by Fonds zur Förderung der wissenschaftlichen Forschung (FWF) grant I 5384. Part of the calculations were performed at Rechenzentrum Garching of the Max Planck Society (Germany). The authors acknowledge the ESRF for beamtime on beamline ID32., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A survey of Earth-abundant metal oxides as oxygen evolution electrocatalysts in acidic media (pH < 1)

  • Yu, Jiahao
  • Giancola, Stefano
  • Khezri, Bahareh
  • Nieto-Castro, David
  • Redondo, Jesús
  • Schiller, Frederik
  • Barja, Sara
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Garcés-Pineda, Felipe A.
  • Galán-Mascarós, José Ramón
This article is part of the themed collection: Hydrogen production, Electrolytic hydrogen appears as one of the most promising options to store renewable energy. In this water splitting process, the sluggish kinetics of the 4-electron oxygen evolution reaction (OER) with its high overpotentials have been widely regarded as the bottleneck to facilitate a fast, energy-efficient process. In alkaline media, numerous earth-abundant metal oxides are efficient OER catalysts, stabilized by the high concentration of hydroxide anions in the electrolyte. However, under acidic conditions, where the hydrogen evolution reaction (HER) is technologically preferred, only noble metal-based oxides (RuO2 and IrO2) are suitable OER catalysts, putting into question the scalability to wide-spread applications due to their scarcity and high cost. Most earth abundant metal oxides dissolve at high proton concentrations. A promising strategy to avoid this drawback consists of incorporating these catalysts into partially hydrophobic composite electrodes. Following this strategy, we have been able to conduct an extensive survey of the activity and stability of mono-, bi- and trimetallic earth-abundant transition metal oxides during the electrocatalytic OER under strongly acidic conditions. Our results confirm the general validity of the strategy by using a hydrophobic electrode to confer high stability to common metal oxides under these harsh conditions. Among all OER catalysts investigated, we found that simple manganese oxides appeared as the most active also exhibiting high, long-term stability. In particular, the stability of Mn2O3 oxide in the OER in acidic media was well confirmed by post-electrolysis characterization data., The authors are thankful for the support from MCIN/AEI/10.13039/501100011033/ and “ERDF A way of making Europe” through projects RED2022-134508-T (CAT&SCALE), PID2021-124796OB-I00 and PID2020-116093RB-C43&C44 funded by MCIN/AEI/10.13039/501100011033; from the Generalitat de Catalunya (2021SGR1154 and 2021SGR00457), and from the Basque Government (IT-1591-22). S.B. acknowledges RYC-2017-21931 funded via MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future and UPV/EHU project EHUrOPE19/01. ICIQ and ICN2 are supported by the Ministerio de Ciencia e Innovación through the Severo Ochoa Excellence Accreditations CEX2019-000925-S (MCIN/AEI) and CEX2021-001214-S; and by the CERCA Programme/Generalitat de Catalunya. J.Y. thanks the China Scholarship Council (CSC) for predoctoral fellowships (File No. 201806270234). J.R. acknowledges the Czech Science Foundation and funding from PIF outgoing project number 22-18079O. M.C.S. has received funding from the European Union's Horizon 2020 research and innovation programme under Marie Skodowska-Curie grant 754510 (PROBIST) and the Severo Ochoa programme. M.C.S. is also thankful for the funding from the postdoctoral fellowship Juan de la Cierva Incorporation from MICINN (JCI-2019) and the Severo Ochoa programme. This study is part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and the Generalitat de Catalunya., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000925-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simulating high-pressure surface reactions with molecular beams

  • Taleb, Amjad Al
  • Schiller, Frederik
  • Vyalikh, Denis V.
  • Pérez, José María
  • Auras, Sabine V.
  • Farías, Daniel
  • Ortega, J. Enrique
Using a reactive molecular beam with high kinetic energy (Ekin), it is possible to speed gas–surface reactions involving high activation barriers (Eact), which would require elevated pressures (P0) if a random gas with a Maxwell–Boltzmann distribution is used. By simply computing the number of molecules that overcome the activation barrier in a random gas at P0 and in a molecular beam at Ekin = Eact, we establish an Ekin–P0 equivalence curve, through which we postulate that molecular beams are ideal tools to investigate gas–surface reactions that involve high activation energies. In particular, we foresee the use of molecular beams to simulate gas surface reactions within the industrial-range (>10 bar) using surface-sensitive ultra-high vacuum (UHV) techniques, such as X-ray photoemission spectroscopy (XPS). To test this idea, we revisit the oxidation of the Cu(111) surface combining O2 molecular beams and XPS experiments. By tuning the kinetic energy of the O2 beam in the range of 0.24–1 eV, we achieve the same sequence of surface oxides obtained in ambient pressure photoemission (AP-XPS) experiments, in which the Cu(111) surface was exposed to a random O2 gas up to 1 mbar. We observe the same surface oxidation kinetics as in the random gas, but with a much lower dose, close to the expected value derived from the equivalence curve., This work has been partially supported by the Spanish Ministerio de Ciencia e Innovación under projects TED2021-130446B-I00 and PID2020-116093RB-C44. Work funded by MCIN/AEI/10.13039/501100011033/, by “ESF investing in your future”, and by the Basque Government (grants No. IT-1591-22). The COST Action CA21101 is also acknowledged. D. F. acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M). SVA acknowledges funding from the European Unions Horizon Europe Programme under the Marie Skłodowska-Curie grant agreement no. 101066965 CURVEO., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Complementary probes for the electrochemical interface

  • Pastor, Ernest
  • Lian, Zan
  • Écija, David
  • Galán-Mascarós, José Ramón
  • Barja, Sara
  • Giménez, Sixto
  • Arbiol, Jordi
  • López, Núria
  • Pelayo García de Arquer, F.
The functions of electrochemical energy conversion and storage devices rely on the dynamic junction between a solid and a fluid: the electrochemical interface (EI). Many experimental techniques have been developed to probe the EI, but they provide only a partial picture. Building a full mechanistic understanding requires combining multiple probes, either successively or simultaneously. However, such combinations lead to important technical and theoretical challenges. In this Review, we focus on complementary optoelectronic probes and modelling to address the EI across different timescales and spatial scales — including mapping surface reconstruction, reactants and reaction modulators during operation. We discuss how combining these probes can facilitate a predictive design of the EI when closely integrated with theory., The authors thank the following projects for support: RED2022-134508-T, PID2021-124796OB-I00, PID2020-116093RB-C41, PID2020-116093RB-C43 and PID2020-116093RB-C44, funded by MCIN/AEI. The Institut de Ciències Fotòniques (ICFO) acknowledges CEX2019-000910-S, Fundació Cellex, Fundació Mir-Puig and the La Caixa Foundation (100010434, EU Horizon 2020 Marie Skłodowska-Curie grant agreement 847648). The Institute of Chemical Research of Catalonia (ICIQ) acknowledges support from the Ministerio de Ciencia e Innovación through the ‘Severo Ochoa’ Excellence Accreditation CEX2021-001214-S. D.E. acknowledges funding from PID2019-108532GB-I00, PID2022-136961NB-I00, QUIMTRONIC-CM Y2018/NMT-4783, the European Union NextGenerationEU (PRTR-C17.I1) (MAD2D-CM)-MRR project, and ERC CoG 766555. IMDEA Nanoscience acknowledges support from the ‘Severo Ochoa’ Program for Centers of Excellence in R&D (CEX2020-001039-S). The Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges support from MCIN/AEI for CEX2021-001214-S, NextGenerationEU (PRTR-C17.I1) PID2020-116093RB-C41 and PID2020-116093RB-C43, and the Generalitat de Catalunya for 2021SGR00457 and PRTR-C17.I1. S.B. acknowledges support from the grants RYC-2017-21931 and EUR2020-112066 funded by MCIN/AEI, from ESF Investing in your future, from the European Union NextGenerationEU/PRTR, and from the Basque Government (grant IT1591-22). ICFO, ICIQ and ICN2 are funded by CERCA — Generalitat de Catalunya. Z.L. and N.L. acknowledge support from Marie Skłodowska-Curie grant agreement number 101064867, the Spanish Ministry of Science and Innovation (PID2021-122516OB-I00 and the ‘Severo Ochoa’ Program for Centers of Excellence CEX2019-000925-S). E.P. acknowledges the support of the CNRS and the French Agence Nationale de la Recherche (ANR), under grant ANR-22-CPJ2-0053-01., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000910-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000925-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CO and O2 interaction with kinked Pt surfaces

  • Garcia-Martinez, Fernando
  • Turco, Elia
  • Schiller, Frederik
  • Ortega, J. Enrique
We investigate the chemical interaction of carbon monoxide (CO) and oxygen (O2) with kink atoms on steps of platinum crystal surfaces using a specially designed Pt curved sample. We aim at describing the fundamental stages of the CO oxidation reaction, i.e., CO-covered/poisoned stage and O-covered/active stage, at the poorly known kinked Pt facets by probing CO uptake/saturation and O2 saturation, respectively. Based on the systematic analysis that the curved surface allows, and using high-resolution X-ray photoemission, a diversity of terrace and step/kink species are straightforwardly identified and accurately quantified, defining a smooth structural and chemical variation across different crystal planes. In the CO-saturated case, we observe a preferential adsorption at step edges, where the CO coverage reaches a CO molecule per step Pt atom, significantly higher than their close-packed analogous steps with straight terrace termination. For the O-saturated surface, a significantly higher O coverage is observed in kinked planes compared to the Pt(111) surface. While the strong adsorption of CO at the kinked edges points toward a higher ignition temperature of the CO oxidation at kinks as compared to terraces, the large O coverage at steps may lead to an increased reactivity of kinked surfaces during the active stage of the CO oxidation., We acknowledge financial support from grants PID2020-116093RB-C44 and PID2019-107338RB-C6-3, funded by the Spanish MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, the Basque Government (Grant IT-1591-22), and the Diputación Foral de Gipuzkoa (Gipuzkoa Next program). We acknowledge Elettra Sincrotrone Trieste for providing access to its synchrotron radiation facilities, and we thank E. Tosi and P. Lacovig for assistance in using beamline SuperESCA. The research leading to this result has been supported by the project CALIPSOplus under grant agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020., Open Access funding provided by University of Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of rare-earth atoms in the anisotropy and antiferromagnetic exchange coupling at a hybrid metal-organic interface

  • Blanco-Rey, María
  • Castrillo-Bodero, Rodrigo
  • Ali, Khadiza
  • Gargiani, Pierluigi
  • Ilyn, Max
  • Gastaldo, Michele
  • Paradinas, Markos
  • Valbuena, Miguel A.
  • Mugarza, Aitor
  • Ortega, J. Enrique
  • Schiller, Frederik
  • Fernández, Laura
Magnetic anisotropy and magnetic exchange interactions are crucial parameters that characterize the hybrid metal–organic interface, a key component of an organic spintronic device. It is shown that the incorporation of 4f RE atoms to hybrid metal–organic interfaces of CuPc/REAu2 type (RE = Gd, Ho) constitutes a feasible approach toward on-demand magnetic properties and functionalities. The GdAu2 and HoAu2 substrates differ in their magnetic anisotropy behavior. Remarkably, the HoAu2 surface promotes the inherent out-of-plane anisotropy of CuPc, owing to the match between the anisotropy axis of substrate and molecule. Furthermore, the presence of RE atoms leads to a spontaneous antiferromagnetic exchange coupling at the interface, induced by the 3d–4f superexchange interaction between the unpaired 3d electron of CuPc and the 4f electrons of the RE atoms. It is shown that 4f RE atoms with unquenched quantum orbital momentum (L), as it is the case of Ho, induce an anisotropic interfacial exchange coupling., This work was financially supported by the Spanish Ministerio de Ciencia e Innovación (grants No. PID2019-103910GB-I00, PID2019-107338RB-C65, PID2020-116093RB-C44, and PID2021-123776NB-C21, PID2022-137685NB-I00, PID2022-140845OB-C63, CEX2021-001214-S, and CEX2020-001039-S funded by MCIN/AEI/10.13039/501100011033/ and by “ESF investing in your future”), as well as the Department of Education, Universities and Research of the Basque Government (grants No. IT1591-22 and IT1527-22 and IKUR Quantum program) and the CERCA Programme/Generalitat de Catalunya and Diputación Foral de Gipuzkoa through the QUAMOS project within the Gipuzkoa Quantum program (DFG-QUAN-000029-01). L.F. acknowledges funding from the European Union's Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2020-001039-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous-flow synthesis of BiVO4 nanoparticles: From laboratory scale to practical systems

  • Robles, Christian
  • Montañés, Laura
  • Mesa, Camilo A.
  • Iglesias, Diego
  • Rabelo Freitas, Helena
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Redondo, Jesús
  • Schiller, Frederik
  • Barja, Sara
  • Julián-López, Beatriz
  • Gutiérrez-Blanco, Ana
  • Sans, Víctor
  • Giménez, Sixto
Cost-effective and efficient photoelectrochemical (PEC) water splitting stands out as one of the most promising strategies to address sustainable energy supply in the form of green H2. Large-area photoelectrodes featuring precise chemical and morphological control are key components for a practical solar-to-hydrogen conversion. Herein, we report the continuous flow synthesis of BiVO4 nanoparticles (NPs) by using a simple microreactor configuration. The solution containing the as-prepared NPs enables the deposition of BiVO4 photoanodes with areas up to 52 cm2 through a simple and scalable chemical bath deposition method. On the other hand, surface protection by an ultrathin Al2O3 overlayer grown by atomic layer deposition (ALD) increases the performance of the 1 cm2 BiVO4 photoanodes ~30 %, exhibiting a photocurrent density of ~2.0 mA⋅cm-2 at 1.23 V vs. the Reversible Hydrogen Electrode in the presence of a sacrificial hole scavenger. The optimized continuous flow synthesis provides an affordable methodology for the fabrication of cost-effective, large-scale photoanodes, which could potentially be applied for different photoelectrochemical reactions., We gratefully acknowledge the financial support from the European Commission associated to the European project “SUN2CHEM”, through the Grant Agreement 884444. The authors thank support from the projects (RED2022–134508-T, PID2020–116093RB−C41; PID2020–116093RB−C43 and PID2020–116093RB−C44), funded by MICIU/ AEI/10.13039/501100011033/ . A.G.B wants to acknowledge the Ministerio de Universidades, supported by the Margarita Salas postdoctoral contract MGS/2022/02(UP2021–021) financed by the European Union-NextGenerationEU and also gratefully acknowledge financial support from the Universitat Jaume I (UJI-2023–15). C.R. and S.G. acknowledge the Universitat Jaume I for the project UJI−B2020–50. C.R. also acknowledges the Ministerio de Ciencia e Innovación under the projects PRE2021–098790 and PID2020–116093RB−C41 founded by MCIN/AEI/10.13039/501100011033 and FSE+. C.A.M. acknowledges the Generalitat Valenciana for the APOSTD/2021/251 fellowship and MinCiencias Colombia through the Fondo Nacional de financiamiento para la ciencia, la tecnología y la innovación “Francisco José de Caldas”, call 848e2019 for funding. We are also grateful to the Serveis Centrals d′Instrumentació Científica from the Universitat Jaume I (SCIC-UJI) for providing all the characterization facilities. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR−C17.I1) and by Generalitat de Catalunya (In-CAEM Project). ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.: CEX2021–001214-S) and is funded by the CERCA Programme/Generalitat de Catalunya. Authors acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA). Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. ICN2 acknowledges funding from Grant IU16–014206 (METCAM-FIB) funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. ICN2 is founding member of e-DREAM.76 S.B. acknowledges Grant RYC-2017–21931 funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future. J.R. acknowledges the Czech Science Foundation and funding from PIF outgoing project number 22–18079O. F.S. acknowledges the Diputación Foral de Gipuzkoa for partial support through PEMA project within Gipuzkoa Next program., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Near-ambient pressure oxidation of silver in the presence of steps: Electrophilic oxygen and sulfur impurities

  • Schiller, Frederik
  • Ali, Khadiza
  • Makarova, Anna A.
  • Auras, Sabine V.
  • Garcia-Martinez, Fernando
  • Idris Bakhit, Alaa Mohammed
  • Castrillo-Bodero, Rodrigo
  • Villar-García, Ignacio J.
  • Ortega, J. Enrique
  • Pérez-Dieste, Virginia
The oxidation of Ag crystal surfaces has recently triggered strong controversies around the presence of sulfur impurities that may catalyze reactions, such as the alkene epoxidations, especially the ethylene epoxidation. A fundamental challenge to achieve a clear understanding is the variety of procedures and setups involved as well as the particular history of each sample. Especially, for the often-used X-ray photoemission technique, product detection, or photoemission peak position overlap are problematic. Here we investigate the oxidation of the Ag(111) surface and its vicinal crystal planes simultaneously, using a curved crystal sample and in situ X-ray photoelectron spectroscopy at 1 mbar O2 near-ambient pressure conditions to further investigate surface species. The curved geometry allows a straightforward comparative analysis of the surface oxidation kinetics at different crystal facets, so as to precisely correlate the evolution of different oxygen species, namely nucleophilic and electrophilic oxygen, and the buildup of sulfur as a function of the crystal orientation. We observed that emission from both surface and bulk oxide contributes to the characteristic nucleophilic oxygen core-level peak, which arises during oxygen dosing and rapidly saturates below temperatures of 180 °C. The electrophilic oxygen peak appears later, growing at a slower but constant rate, at the expenses of the surface oxide. Electrophilic oxygen and sulfur core-levels evolve in parallel in all crystal facets, although faster and stronger at vicinal surfaces featuring B-type steps with {111} microfacets. Our study confirms the intimate connection of the electrophilic species with the formation of adsorbed SO4, and points to a higher catalytic activity of B-type stepped silver surfaces for alkene epoxidation or methane to formaldehyde conversion., The authors thank support from the project PID2020-116093RB-C44, funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the Basque Government proposal IT-1591-22 and the Gipuzkoa Next program of the Diputación Foral de Gipukoa DFG- 2023-CIEN-000077. S.V.A. acknowledges funding from the European Union’s Horizon 2020 research and innovation program through the Marie Skłodowska-Curie grant agreement no. 101066965 CURVEO. This experiments were performed at CIRCE-NAPP beamline at ALBA, with collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and electronic properties of stable facets in the 2D material hexagonal boron nitride (hBN) on curved platinum

  • Idris Bakhit, Alaa Mohammed
  • Ali, Khadiza
  • Makarova, Anna A.
  • Píš, Igor
  • Bondino, Federica
  • Schiller, Frederik
A hexagonal boron nitride (hBN) monolayer was grown on a curved crystal c-Pt(331) substrate including all vicinal surfaces between Pt(111) and Pt(110) faces. The surface structure has been studied by a combination of low-energy electron diffraction (LEED) and scanning tunnelling microscopy (STM). We observed that the hBN monolayer covers the entire curved crystal, but induces a faceting subsequent to the growth. We encountered (111), (221), (441), (991), and (110) as stable facets. We assign this faceting to two factors i) a better lattice coincidence and ii) the existence of local covalent bonds and non-local Van der Waals interactions., The electronic structure was characterized by near-edge x-ray absorption fine structure (NEXAFS), X-ray photoemission spectroscopy and angle-resolved photoemission spectroscopy (ARPES). The hBN/Pt(111) has the weakest interacting overlayer system, while the hBN on vicinal surfaces is more strongly bound to the Pt substrate., Additionally, we determined using angle-resolved photoemission measurements (ARPES) that the π band shifts downward when going away from the hBN/Pt(111) surface towards hBN/Pt(110). In the latter case, the π band shift is the largest., We acknowledge financial support from grant PID2020-116093RB-C44 funded by the Spanish MCIN/AEI/10.13039/501100011033, as well as the Basque Government Grant IT-1591-22. The research leading to this result has been further supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research Innovation HORIZON 2020. A.A.M. acknowledge BMBF (grant no. 05K19KER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic and electronic properties of hybrid metal–organic interfaces on rare earthgold surface compounds

  • Fernández, Laura
  • Castrillo-Bodero, Rodrigo
  • Blanco-Rey, María
  • Ali, Khadiza
  • Ortega, J. Enrique
  • Schiller, Frederik
Resumen del trabajo presentado al 13th Joint European Magnetic Symposia (JEMS), celebrado en Madrid del 27 de agosto al 1 de septiembre de 2023., Fundamental knowledge of magnetic and electronic interaction phenomena that takes place at the hybrid metalorganic interface is decisive to explore the possibility to create highly spin-polarized spinterfaces to enhance the performance of organic spintronic devices. To this end, tailoring magnetic properties on structurally robust substrates is crucial. Rare-earth/noble metal monolayer alloys, grown on gold surfaces, possess a big potential as nanostructured magnetic templates with structural stability. Different elements of the lanthanide series have been observed to form surface-confined alloys in Au(111), characterized by a high crystal quality and nanoscale periodic corrugation. We have prepared hybrid metal–organic interfaces by the adsorption of copper phthalocyanine CuPc on REAu2 monolayers (RE = Gd, Ho and Yb) and studied their growth, electrostatics, electronic structure and magnetic properties. We observe a significant effect of the RE valence of the substrate on the carrier injection barrier of the hybrid metal–organic interface. CuPc adsorbed on trivalent RE-based surfaces (HoAu2 and GdAu2) exhibits molecular level energies that may allow injection carriers significantly closer to an ambipolar injection behavior than in the divalent case (YbAu2). Moreover, the magnetic exchange coupling between the ferromagnetic surfaces (HoAu2 and GdAu2) and the CuPc layer is explored, studing the effect of the RE atom on the magnetic behavior of the hybrid metal-organic interface., The authors acknowlege Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I and the Basque Government (grants No. IT-1591-22, IT-152722), the EU Horizon 2020 through the Marie Skłodowska-Curie Grant MagicFACE No. 797109., No
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sustainable oxygen evolution electrocatalysis in aqueous 1 M HSO with earth abundant nanostructured CoO

  • Yu, Jiahao|||0000-0003-3707-7047
  • Garcés-Pineda, Felipe A.|||0000-0001-5759-9980
  • González-Cobos, Jesús|||0000-0003-0885-5815
  • Peña-Díaz, Marina|||0000-0001-9309-6272
  • Rogero, Celia|||0000-0002-2812-8853
  • Giménez, Sixto|||0000-0002-4522-3174
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Barja, Sara|||0000-0002-4257-2651
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
Earth-abundant electrocatalysts for the oxygen evolution reaction (OER) able to work in acidic working conditions are elusive. While many first-row transition metal oxides are competitive in alkaline media, most of them just dissolve or become inactive at high proton concentrations where hydrogen evolution is preferred. Only noble-metal catalysts, such as IrO2, are fast and stable enough in acidic media. Herein, we report the excellent activity and long-term stability of Co3O4-based anodes in 1 M H2SO4 (pH 0.1) when processed in a partially hydrophobic carbon-based protecting matrix. These Co3O4@C composites reliably drive O2 evolution a 10 mA cm-2 current density for >40 h without appearance of performance fatigue, successfully passing benchmarking protocols without incorporating noble metals. Our strategy opens an alternative venue towards fast, energy efficient acid-media water oxidation electrodes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly Durable Nanoporous CuS Films for Efficient Hydrogen Evolution Electrocatalysis under Mild pH Conditions

  • Fernández-Climent, Roser
  • Redondo, Jesús
  • García-Tecedor, Miguel|||0000-0002-9664-4665
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Li, Junnan
  • Chartrand, Daniel
  • Schiller, Frederik|||0000-0003-1727-3542
  • Pazos, Jhon
  • Hurtado, Mikel F.
  • de la Peña O'Shea, Victor|||0000-0001-5762-4787
  • Kornienko, Nikolay|||0000-0001-7193-2428
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Barja, Sara|||0000-0002-4257-2651
  • Mesa, Camilo A.|||0000-0002-8450-2563
  • Giménez, Sixto|||0000-0002-4522-3174
Copper-based hydrogen evolution electrocatalysts are promising materials to scale-up hydrogen production due to their reported high current densities; however, electrode durability remains a challenge. Here, we report a facile, cost-effective, and scalable synthetic route to produce CuS electrocatalysts, exhibiting hydrogen evolution rates that increase for ∼1 month of operation. Our CuS electrodes reach a state-of-the-art performance of ∼400 mA cm -2 at -1 V vs RHE under mild conditions (pH 8.6), with almost 100% Faradaic efficiency for hydrogen evolution. The rise in current density was found to scale with the electrode electrochemically active surface area. The increased performance of our CuS electrodes correlates with a decrease in the Tafel slope, while analyses by X-ray photoemission spectroscopy, operando X-ray diffraction, and in situ spectroelectrochemistry cooperatively revealed the Cu-centered nature of the catalytically active species. These results allowed us to increase fundamental understanding of heterogeneous electrocatalyst transformation and consequent structure-activity relationship. This facile synthesis of highly durable and efficient CuS electrocatalysts enables the development of competitive electrodes for hydrogen evolution under mild pH conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Complementary probes for the electrochemical interface

  • Pastor, Ernest|||0000-0001-5334-6855
  • Lian, Zan|||0000-0001-6922-406X
  • Xia, Lu|||0000-0002-2726-5389
  • Ecija, David|||0000-0002-8661-8295
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
  • Barja, Sara|||0000-0002-4257-2651
  • Giménez, Sixto|||0000-0002-4522-3174
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • López, Núria|||0000-0001-9150-5941
  • García de Arquer, F. Pelayo|||0000-0003-2422-6234
The functions of electrochemical energy conversion and storage devices rely on the dynamic junction between a solid and a fluid: the electrochemical interface (EI). Many experimental techniques have been developed to probe the EI, but they provide only a partial picture. Building a full mechanistic understanding requires combining multiple probes, either successively or simultaneously. However, such combinations lead to important technical and theoretical challenges. In this Review, we focus on complementary optoelectronic probes and modelling to address the EI across different timescales and spatial scales - including mapping surface reconstruction, reactants and reaction modulators during operation. We discuss how combining these probes can facilitate a predictive design of the EI when closely integrated with theory.