Pasar al contenido principal

MAGNETISMO EXOTICO Y FENOMENOS DE CORELACION DE ELECTRONES EN LA SUPERFICIE Y EL SOLIDO DE MATERIALES BASADAS EN TIERRAS RARAS

MAT2017-88374-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic oxidation of carbon monoxide on a curved Pd crystal: Spatial variation of active and poisoning phases in stationary conditions

  • Schiller, Frederik
  • Ilyn, Max
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Huck-Iriart, Cristián
  • Ruiz del Árbol, Nerea
  • Hagman, Benjamin
  • Merte, Lindsay R.
  • Bertram, Florian
  • Shipilin, Mikhail
  • Blomberg, Sara
  • Gustafson, Johan
  • Lundgren, Edvin
  • Ortega, J. Enrique
Understanding nanoparticle catalysis requires novel approaches in which adjoining crystal orientations can be studied under the same reactive conditions. Here we use a curved palladium crystal and near-ambient pressure X-ray photoemission spectroscopy to characterize chemical species during the catalytic oxidation of CO in a whole set of surfaces vicinal to the (111) direction simultaneously. By stabilizing the reaction at fixed temperatures around the ignition point, we observe a strong variation of the catalytic activity across the curved surface. Such spatial modulation of the reaction stage is straightforwardly mapped through the photoemission signal from active oxygen species and poisoning CO, which are shown to coexist in a transient regime that depends on the vicinal angle. Line-shape analysis and direct comparison with ultrahigh vacuum experiments help identifying and quantifying all such surface species, allowing us to reveal the presence of surface oxides during reaction ignition and cooling-off., We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT-2012-38567-C02-02, MAT-2016-78293-C6, MAT-2017-88374-P) and Basque Government (Grant IT-1255-19)., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxygen intercalation and oxidation of atomically thin h-BN grown on a curved Ni crystal

  • Makarova, Anna A.
  • Fernández, Laura
  • Usachov, Dmitry Yu.
  • Fedorov, Alexander
  • Bokai, Kirill A.
  • Smirnov, Dmitry A.
  • Laubschat, Clemens
  • Vyalikh, Denis V.
  • Schiller, Frederik
  • Ortega, J. Enrique
We study the effect of thermal oxygen exposure on a monolayer of h-BN grown on vicinal Ni surfaces by scanning tunneling microscopy, X-ray absorption, and photoemission spectroscopies. Using a curved Ni crystal, we carry out a systematic exploration of the h-BN monolayer interfacing a full variety of vicinal orientations around the (111) high-symmetry direction. We demonstrate the occurrence of two processes upon oxygen exposure: oxygen intercalation underneath the h-BN layer, which leads to decoupling of the h-BN from the substrate, and oxidation of h-BN itself, which proceeds via substitution of nitrogen atoms. Oxygen intercalation appears to be substrate orientation dependent, while oxidation of h-BN is rather uniform over the different vicinal planes. These findings will be of importance for future applications of BN-based devices and materials under ambient conditions., We are grateful to the Interdisciplinary Resource Center for Nanotechnology of the Research Park of Saint Petersburg State University for performing SEM measurements. A.A.M., C.L., and D.A.S. acknowledge DFG (Grant No. LA655-19/1) and BMBF (Grant No. 05K12OD2). L.F. and A.F. acknowledge financial support within the joint project of the Russian Science Foundation (Project 16-42-01093) and DFG (Grant LA655-17/1). K.A.B. and D.Yu.U. acknowledge Saint Petersburg State University for research Grant 11.65.42.2017 and RFBR (Grant 17-02-00427). We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT-2016-78293-C6 and MAT-2017-88374-P) and Basque Government (Grant IT-1255-19). We acknowledge Helmholtz-Zentrum Berlin für Materialien und Energie for support within the bilateral Russian–German Laboratory program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Vicinal Ag(111) surfaces with fully-kinked steps

  • Ortega, J. Enrique
  • Vasseur, Guillaume
  • Piquero-Zulaica, Ignacio
  • Matencio, Sonia
  • Raoult, Julien
  • Schiller, Frederik
  • Corso, Martina
  • Mugarza, Aitor
  • Lobo-Checa, Jorge
Resumen del trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 25 de febrero al 10 de marzo de 2018., Vicinal surfaces with arrays of atomic steps have important applications in catalysis, nanostructure growth, or electronic band engineering, since steps are active sites for chemical reactions, as well as nucleation and electron scattering centers. Given the infinite possibilities for the orientation of a vicinal surface, it is important to perform systematic investigations, in order to identify optimal substrates for specific functions. Using macroscopically curved crystal samples one can systematically probe entire families of vicinal planes with standard surface science techniques. This is done here for vicinal Ag(111) surfaces featuring the so-called fully- or 100%-kinked steps. Fully-kinked monatomic steps (height h=2.35 Å) run parallel to the [112̅] direction and have six-fold atomic coordination, as compared with the seven-fold coordinated close-packed steps, which are oriented along the [11̅0] direction. In such fully-kinked Ag(111) vicinals we investigate electronic and structural properties with STM, LEED and Angle-Resolved Photoemission (ARPES), and test both the growth of BiAg2 alloys and the on-surface synthesis of zig-zag polymers. The sample is a Ag single crystal curved around the (645) direction, such that the vicinal angle α can be tuned from the Ag(111) plane, beyond the Ag(423) surface, up to α=18º. As done in previous works on close-packed Ag(111), Cu(111) and Au(111) vicinals, we study the probability distribution of the terrace size d as a function of the vicinal angle from STM images, and probe the scattering of the Shockley state at the fully-kinked step by ARPES. We find that fully-kinked vicinals exhibit exceptional ordering, allowing one to visualize the universal, structural transformation of vicinal metal surfaces with unprecedented precision. This opens the way to a fine test of statistical models of step-lattices largely debated in the past. As shown in the Figure, the Shockley state analysis reveals a much stronger scattering strength at the fully-kinked step when compared to the closed-packed, leading to a dramatic decrease of the surface electron density in vicinal surfaces, that is, to a complete electron depletion of Ag(111) terraces with d <1.6 nm. Next we tested the growth of the BiAg2 monolayer, and observed the presence of magic vicinal angles at which one can achieve atomically sharp BiAg2 step grids, ideal to explore spin scattering properties. Finally we explored the on-surface synthesis of DMTP zig-zag polymers, where we also found optimal crystal orientations to template well-oriented onedimensional chains, such as to facilitate spectroscopic characterization by ARPES., We acknowledge financial support from the Spanish Ministry of Economy (grant MAT2017-88374-P) and the Basque Government (grant IT621-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

In-situ oxidation of CO on a curved Pt(111) surface

  • Garcia-Martinez, Fernando
  • Ilyn, Max
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Hagman, Benjamin
  • Blomberg, Sara
  • Gustafson, Johan
  • Lundgren, Edvin
  • Walther, Andrew L.
  • Waluyo, Iradwikanari
  • Schiller, Frederik
Resumen del póster presentado al 5th Annual Ambient Pressure X-ray Photoelectron Spectroscopy Workshop, celebrado en Berlin (Alemania) del 11 al 14 de diciembre de 2018., The study of the catalytic CO oxidation on Pt single crystals and nanoparticles has been a wide research field since long. However, the role and the interplay among different coordination sites and facet planes has never been clarified. This is in part due to the fact that both crystal surfaces and nanoparticles undergo complex structural/chemical changes during catalytic reactions. In this context, using multi-facet samples, such as cylindrical crystals, for in-situ studies is highly desirable. We have carried out near-ambient pressure X-ray photoemission (NAP-XPS) experiments of the CO oxidation using a curved Pt(111) crystal. The figure below shows the temperature evolution of the O 1s at the (335) plane, marking the ignition temperature at 505 K. Once this is known, we freeze the reaction at fixed temperatures around the ignition point and scan the surface with the synchrotron beam. This allows us to probe surface chemical species across different crystallographic planes in stationary conditions. As a way of example, the figure (left) shows the C 1s scan across the curved surface before the ignition (480 K, poisoned stage). The temperature scan at the (111) plane (right panel) shows that, below the onset of the catalytic reaction, the surface is covered with a variety of chemisorbed CO (Chem-CO) species, in the presence of CO and O2 in the gas phase. When the ignition begins, Chem-CO is displaced by chemisorbed oxygen and Pt oxides, and this process is accompanied by the quenching of the CO gas signal, the emergence of CO2, and the rightward shift of all gas phase peaks. The XPS scan in the left panel demonstrates that, in the poisoned stage, there is a vicinal-angle-dependent variety of Chem-CO species (terrace-top, terrace-bridge, step-top), similar in nature and concentration to those that saturate the c-Pt(111) crystal at 300 K in Ultra-High-Vacuum., We acknowledge financial support from the Spanish Ministry of Economy (Grant MAT-2017-88374-P) and Basque Government (Grant IT621-13)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

In situ oxidation of CO on a curved Pt(111) surface in near- ambient pressure conditions

  • García-Pérez, Fernando
  • Schiller, Frederik
  • Ilyn, Max
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Hagman, Benjamin
  • Blomberg, Sara
  • Gustafson, Johan
  • Lundgren, Edvin
  • Ortega, J. Enrique
Resumen del trabajo presentado a la conferencia Tailored surfaces in operando conditions (Tailor): A Marcus Wallenberg symposium, celebrada en Ystad (suecia) del 11 al 14 de junio de 2018., The study of heterogeneous catalysis using metal single crystal has been a wide research field since long. Nevertheless, neither the real mechanism nor the role of atomic terraces/steps has been clearly identified, which makes the development of efficient (nanostructured) catalysts harder. Crystal surfaces undergo structural/chemical changes during catalytic reactions, so in situ studies are required for a real understanding of the process. For this reason we have carried out near-ambient pressure X-ray photoemission (NAP-XPS) experiments of the CO oxidation by O2 on a curved Pt crystal around the (111) face. By scanning the small X-ray beam, XPS spectra were collected all over the surface, observing a variation of the active species across the different crystallographic planes. The figure below shows the C 1s XPS spectra taken when increasing the temperature during the ignition process at the (111) face (left side) and at a fixed temperature (T=525K) scanning over the curved crystal (rigth side). The temperature scan at the (111) plane (left side panel) shows that, below the onset of the catalytic reaction, the surface is covered with two carbon species, namely chemisorbed CO (Chem-CO) and graphitic carbon ("C"). When the ignition starts, the "C" species is eliminated first, and then the Chem-CO is displaced by chemisorbed oxygen. This process is accompanied by a rightward shift of the gas phase components. The rigth panel demonstrates that the relative intensity of each "C" and Chem-CO varies across the curved surface, indicating a progressively increasing activity from the low active edge on top (A stepped surfaces), to the (111) center, and to the highly active B-stepped edge., We acknowledge financial support from the Spanish Ministry of Economy (Grant MAT-2017-88374-P) and Basque Government (Grant IT621-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boron nitride monolayer growth on vicinal Ni(1 1 1) surfaces systematically studied with a curved crystal

  • Fernández, Laura
  • Makarova, Anna A.
  • Laubschat, Clemens
  • Vyalikh, Denis V.
  • Usachov, Dmitry Yu.
  • Ortega, J. Enrique
  • Schiller, Frederik
The structural and electronic properties of hexagonal boron nitride (hBN) grown on stepped Ni surfaces are systematically investigated using a cylindrical Ni crystal as a tunable substrate. Our experiments reveal homogeneous hBN monolayer coating of the entire Ni curved surface, which in turn undergoes an overall faceting. The faceted system is defined by step-free hBN/Ni(1 1 1) terraces alternating with strongly tilted hBN/Ni(1 1 5) or hBN/Ni(1 1 0) nanostripes, depending on whether we have A-type or B-type vicinal surfaces, respectively. Such deep substrate self-organization is explained by both the rigidity of the hBN lattice and the lack of registry with Ni crystal planes in the vicinity of the (1 1 1) surface. The analysis of the electronic properties by photoemission and absorption spectroscopies reveal a weaker hBN/Ni interaction in (1 1 0)- and (1 1 5)-oriented facets, as well as an upward shift of the valence band with respect to the band position at the hBN/Ni(1 1 1) terrace., We acknowledge financial support from the Deutsches Forschungsgemein chaft DFG (Grants LA655-17/1 and LA655-19/1), the Spanish Ministry of Economy (Grants MAT-2016-78293-C6, MAT-2017-88374-P), the Basque Government (Grant IT-1255-19), the Helmholtz-Zentrum Berlin für Materialien und Energie for support within the bilateral RussianGerman Laboratory program as well as from the joint project of the Russian Science Foundation (project 16-42-01093) and DFG (Grant No. LA655-17/1). DYuU acknowledges St. Petersburg State University for research Grant No. 11.65.42.2017 and Russian Foundation for Basic Research RFBR (Project No. 17-02-00427).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emerging 2D-ferromagnetism and strong spin-orbit coupling at the surface of valence-fluctuating EuIr2Si2

  • Schulz, Susanne
  • Nechaev, I. A.
  • Güttler, Monika
  • Poelchen, Georg
  • Generalov, Alexander
  • Danzenbächer, Steffen
  • Chikina, Alla
  • Seiro, Silvia
  • Kliemt, Kristin
  • Vyazovskaya, Alexandra Yu.
  • Kim, Timur
  • Dudin, Pavel
  • Chulkov, Eugene V.
  • Laubschat, Clemens
  • Krasovskii, E. E.
  • Geibel, Christoph
  • Krellner, Cornelius
  • Kummer, Kurt
  • Vyalikh, Denis V.
The development of materials that are non-magnetic in the bulk but exhibit two-dimensional (2D) magnetism at the surface is at the core of spintronics applications. Here, we present the valence-fluctuating material EuIrSi, where in contrast to its non-magnetic bulk, the Si-terminated surface reveals controllable 2D ferromagnetism. Close to the surface the Eu ions prefer a magnetic divalent configuration and their large 4f moments order below 48 K. The emerging exchange interaction modifies the spin polarization of the 2D surface electrons originally induced by the strong Rashba effect. The temperature-dependent mixed valence of the bulk allows to tune the energy and momentum size of the projected band gaps to which the 2D electrons are confined. This gives an additional degree of freedom to handle spin-polarized electrons at the surface. Our findings disclose valence-fluctuating rare-earth based materials as a very promising basis for the development of systems with controllable 2D magnetic properties which is of interest both for fundamental science and applications., This work was supported by the German Research Foundation (DFG) through Grants No. KR3831/5-1, No. LA655/20-1 and Fermi-NEst. Support was provided by the Spanish Ministry of Science, Innovation and Universities (Project No. FIS2016-76617-P and No. FIS2016-75862-P). We acknowledge financial support from the Spanish Ministry of Economy (MAT-2017-88374-P). The authors also acknowledge support by Saint Petersburg State University (Grant No. 15.61.202.2015) and Tomsk State University Academic D. I. Mendeleev Fund Program (Research Grant No. 8.1.01.2018). We acknowledge Diamond Light Source for access to beamline I05 (proposals no. SI18844-1 and SI17761-1) that contributed to the results presented here.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene: Free electron scattering within an inverted honeycomb lattice

  • Abd El-Fattah, Zakaria M.
  • Kher-Elden, Mohammad A.
  • Piquero-Zulaica, Ignacio
  • García de Abajo, Francisco Javier
  • Ortega, J. Enrique
Theoretical progress in graphene physics has largely relied on the application of a simple nearest-neighbor tight-binding model capable of predicting many of the electronic properties of this material. However, important features that include electron-hole asymmetry and the detailed electronic bands of basic graphene nanostructures (e.g., nanoribbons with different edge terminations) are beyond the capability of such a simple model. Here we show that a similarly simple plane-wave solution for the one-electron states of an atom-based two-dimensional potential landscape, defined by a single fitting parameter (the scattering potential), performs better than the standard tight-binding model, and levels to density-functional theory in correctly reproducing the detailed π-band structure of a variety of graphene nanostructures. In particular, our approach identifies the three hierarchies of nonmetallic armchair nanoribbons, as well as the doubly-degenerate flat bands of free-standing zigzag nanoribbons with their energy splitting produced by symmetry breaking. The present simple plane-wave approach holds great potential for gaining insight into the electronic states and electro-optical properties of graphene nanostructures and other two-dimensional materials with intact or gapped Dirac-like dispersions., This work has been supported in part by the Spanish MINECO (Grants No. MAT2014-59096-P, No. MAT2016-78293-C6, No. MAT-2017-88374-P, No. MAT2017-88492-R, and No. SEV2015-0522), the Basque Government (Grant No. IT-1255-19), the European Research Council (Advanced Grant No. 789104-eNANO), the European Commission (Graphene Flagship 696656), the Catalan CERCA Program, Fundació Privada Cellex, and AGAUR (Grant No. 2017 SGR 1651).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Origin of two-dimensional electronic states at Si- And Gd-terminated surfaces of GdRh2Si2 (001)

  • Vyazovskaya, Alexandra Yu.
  • Otrokov, Mikhail M.
  • Koroteev, Yuri M.
  • Kummer, Kurt
  • Güttler, Monika
  • Vyalikh, Denis V.
  • Chulkov, Eugene V.
We present a first-principles study of the GdRh2Si2(001) surface electronic structure. Two surfaces, Si- and Gd-terminated, are considered. The origin of the two-dimensional (2D) electronic states at both terminations is investigated by tracing the band structure evolution by going from individual Si, Rh, and Gd atomic layers to (non)stoichiometric ultrathin films and, finally, to thicker GdRh2Si2 slabs. We find the conic-like (Dirac-like) resonance state located in the vicinity of the Γ point at the Si termination to form via the Tamm mechanism and explain the reasons for the differences in dispersion and energy position of the resonance states at the Si and Gd terminations. Then, we show how the butterfly-like dispersion of the Shockley state, residing in the bulk projected band gap near the M point, appears due to the interaction of the bands localized in the surface and subsurface Gd-Si-Rh-Si blocks of the Si termination. Also, a giant sign-alternating atomic relaxation near both the Si- and Gd-terminated surfaces is revealed and its effect on the dispersion and energy position of the 2D states is discussed. In this way we shed light on the origin of the 2D states and explain their dispersion seen in angle-resolved photoemission spectroscopy experiments., We acknowledge support by the Academic D. I. Mendeleev Fund Program of Tomsk State University (Project No. 8.1.01.2018), a Saint Petersburg State University grant for scientific investigations (Grant No. 15.61.202.2015), and the Fundamental Research Program of the State Academies of Sciences for 2019–2021 (line of research III.23.2.9). Support by the Basque Departamento de Educacion, UPV/EHU (Grant No. IT-756-13), and Spanish Ministerio de Economia y Competitividad (MINECO Grant No. FIS2016-75862-P) is also acknowledged. We acknowledge financial support from the Spanish Ministry of Economy (MAT-2017-88374-P). The calculations were performed at the Research park of St. Petersburg State University «Computing Center», at the SKIF Cyberia cluster of Tomsk State University, and at Donostia International Physics Center.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cubic Rashba effect in the surface spin structure of rare-earth ternary materials

  • Usachov, Dmitry Yu.
  • Nechaev, I. A.
  • Poelchen, Georg
  • Güttler, Monika
  • Krasovskii, E. E.
  • Schulz, Susanne
  • Generalov, Alexander
  • Kliemt, Kristin
  • Kraiker, A.
  • Krellner, Cornelius
  • Kummer, Kurt
  • Danzenbächer, Steffen
  • Laubschat, Clemens
  • Weber, Andrew P.
  • Sánchez-Barriga, Jaime
  • Chulkov, Eugene V.
  • Santander-Syro, A. F.
  • Imai, T.
  • Miyamoto, Koji
  • Okuda, Taichi
  • Vyalikh, Denis V.
Spin-orbit interaction and structure inversion asymmetry in combination with magnetic ordering is a promising route to novel materials with highly mobile spin-polarized carriers at the surface. Spin-resolved measurements of the photoemission current from the Si-terminated surface of the antiferromagnet TbRh2Si2 and their analysis within an ab initio one-step theory unveil an unusual triple winding of the electron spin along the fourfold-symmetric constant energy contours of the surface states. A two-band k⋅p model is presented that yields the triple winding as a cubic Rashba effect. The curious in-plane spin-momentum locking is remarkably robust and remains intact across a paramagnetic-antiferromagnetic transition in spite of spin-orbit interaction on Rh atoms being considerably weaker than the out-of-plane exchange field due to the Tb 4f moments., This work was supported by the German Research Foundation (Grants No. KR-3831/5-1, No. LA655/20-1, GRK1621, Fermi-NESt No. ANR-16-CE92-0018, and SFB1143, project-id 247310070) and the Spanish Ministry of Science, Innovation, and Universities (Grant Nos. FIS2016-76617-P and MAT-2017-88374-P). We also acknowledge funding from the Department of Education of the Basque government (Grant No. IT1164-19), St. Petersburg State University (Project ID 51126254), and the Russian Foundation for Basic Research (Grant No. 20-32-70127). The SR-ARPES experiments at HiSOR were performed with the approval of the Proposal Assessing Committee of the Hiroshima Synchrotron Radiation Center (Proposal No. 18BG023). We also acknowledge the Impuls-und Vernetzungsfonds der Helmholtz Gemeinschaft (Grant No. HRSF-0067), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin structure of spin-orbit split surface states in a magnetic material revealed by spin-integrated photoemission

  • Usachov, Dmitry Yu.
  • Güttler, Monika
  • Schulz, Susanne
  • Poelchen, Georg
  • Seiro, Silvia
  • Kliemt, Kristin
  • Kummer, Kurt
  • Krellner, Cornelius
  • Laubschat, Clemens
  • Chulkov, Eugene V.
  • Vyalikh, Denis V.
The emergence of ferromagnetism in Rashba systems, where the evolving exchange interaction enters into competition with spin-orbit coupling, leads to a nontrivial spin-polarized electronic landscape with an intricate momentum-dependent spin structure, which is challenging to unveil. Here, we show a way to disentangle the contributions from the effective spin-orbit and exchange fields and thus to gain knowledge of the spin structure in ferromagnetic Rashba materials, which is required for spintronic applications. Our approach is based exclusively on spin-integrated photoemission measurements combined with a two-band modeling. As an example, we consider the mixed-valent material EuIr2Si2 which, while being nonmagnetic in the bulk, reveals strong ferromagnetism at the iridium-silicide surface where both spin-orbit and exchange magnetic interactions coexist. The combined effect of these interactions causes a complex band dispersion of the surface state which can be observed in photoemission experiments. Our method allows us to comprehensively unravel the surface-state spin structure driven by spin-orbit coupling at the ferromagnetic surface. This approach opens up opportunities to characterize the spin structure of ferromagnetic Rashba materials, especially where dedicated spin-resolved measurements remain challenging., This work was supported by Saint Petersburg State University (Grant No. ID 51126254) and the Russian Foundation for Basic Research (Grant No. 20-32-70127). We acknowledge financial support from the Spanish Ministry of Economy (No. MAT-2017-88374-P) and the German Research Foundation (DFG) through Grants No. LA655/20-1, No. KR3831/5-1, and Fermi-NEst. We acknowledge Diamond Light Source for access to beamline I05 (Proposals No. SI18844-1 and No. SI17761-1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic oxidation of CO on a curved Pt(111) surface: Simultaneous ignition at all facets through a transient CO-O complex

  • Garcia-Martinez, Fernando
  • García-Fernández, Carlos
  • Simonovis, Juan Pablo
  • Hunt, Adrian
  • Walter, Andrea
  • Waluyo, Iradwikanari
  • Bertram, Florian
  • Merte, Lindsay R.
  • Shipilin, Mikhail
  • Pfaff, Sebastian
  • Blomberg, Sara
  • Zetterberg, Johan
  • Gustafson, Johan
  • Lundgren, Edvin
  • Sánchez-Portal, Daniel
  • Schiller, Frederik
  • Ortega, J. Enrique
The catalytic oxidation of CO on transition metals, such as Pt, is commonly viewed as a sharp transition from the CO-inhibited surface to the active metal, covered with O. However, we find that minor amounts of O are present in the CO-poisoned layer that explain why, surprisingly, CO desorbs at stepped and flat Pt crystal planes at once, regardless of the reaction conditions. Using near-ambient pressure X-ray photoemission and a curved Pt(111) crystal we probe the chemical composition at surfaces with variable step density during the CO oxidation reaction. Analysis of C and O core levels across the curved crystal reveals that, right before light-off, subsurface O builds up within (111) terraces. This is key to trigger the simultaneous ignition of the catalytic reaction at different Pt surfaces: a CO-Pt-O complex is formed that equals the CO chemisorption energy at terraces and steps, leading to the abrupt desorption of poisoning CO from all crystal facets at the same temperature., We acknowledge financial support from the Spanish Ministry of Science and Innovation (Grants MAT-2017-88374-P, PID2019-107338RB-C63, PID2019-107338RB-C66), the Basque Government (Grants IT-1255-19, IT-1246-19), the Knut and Alice Wallenberg foundation (DNR KAW 2015.0058 „Atomistic Design of new Catalysts“) and the Swedish Research Council (DNR 349-2011-6491 „Catalysis on the atomic scale“).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CO Chemisorption on Vicinal Rh(111) Surfaces Studied with a Curved Crystal

  • Garcia-Martinez, Fernando
  • Schiller, Frederik
  • Blomberg, Sara
  • Shipilin, Mikhail
  • Merte, Lindsay R.
  • Gustafson, Johan
  • Lundgren, Edvin
  • Ortega, J. Enrique
Curved crystal surfaces enable the systematic and accurate comparison of physical and chemical processes for a full set of vicinal crystal planes, which are probed in the very same environment. Here, we examine the early stages of the CO chemisorption on vicinal Rh(111) surfaces using a curved Rh crystal that exposes a smoothly variable density of {100} (A-type) and {111} (B-type) steps. We readily identify and quantify step and terrace species by resolving their respective core-level lines using X-ray photoelectron spectroscopy at different locations on the curved surface. Uptake experiments show similar sticking probabilities at all surface planes, subtle asymmetries between A- and B-type steps, and significantly lower saturation coverage at densely stepped surfaces as compared to the (111) plane. The analysis of the C 1s intensity variation across the curved sample allows us to discuss the adsorption geometry around the step edge., We acknowledge financial support from the Spanish Ministry of Economy (Grants MAT-2016-78293-C6, MAT-2017- 88374-P), Basque Government (Grant IT-1255-19), the VR funded Röntgen−Angström collaboration “Catalysis on the atomic scale” project number 349-2011-6491, and the Knut and Alice Wallenberg (KAW) funded project “Atomistic design of new catalysts” project number KAW 2015.0058.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Atomically precise step grids for the engineering of helical states

  • Ortega, J. Enrique
  • Vasseur, Guillaume
  • Piquero-Zulaica, Ignacio
  • Schiller, Frederik
  • Raoult, Julien
  • Valbuena, Miguel A.
  • Schirone, S.
  • Matencio, Sonia
  • Mugarza, Aitor
  • Lobo-Checa, Jorge
Trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 1 al 7 de marzo de 2020., Conventional spin-degenerated surface electrons have been effectively manipulated by using organic and inorganic self-assembled nano-arrays as resonators. Step superlattices naturally assembled in vicinal surfaces are a particularly interesting case since they represent simple one-dimensional (1D) models for fundamental studies, and can imprint strong anisotropies in surface electron transport in real devices. Here we present the first realization of periodic resonator arrays on the BiAg2 atom-thick surface alloy with unprecedented atomic precision, and demonstrate their potential ability for tuning helical Rashba states. We employ a Ag cylindrical crystal curved around the Ag(645) vicinal surface [c-Ag(645) sample] to be able of selecting local vicinal planes with kinked steps. After sublimation and post-annealing of a 0.3 ML Bi layer, we achieve a homogenous BiAg2 surface alloy, featuring sharp arrays of extraordinarily straight Bi-terminated, monoatomic steps, with variable (tunable) density across the curved surface. Scanning the ultraviolet light beam on such Bi/c-Ag(645) interface in angle-resolved photoemission (ARPES) experiments allowed us to observe the characteristic signatures of strong and coherent step-lattice scattering in the spin-textured bands of the BiAg2 alloy, that is, step-umklapps, and a large, step-density-dependent Rashba band shift. First-principle DFT calculations reveal a complex terrace/step spin/orbital composition, which in turn explains the large spectral broadening and strong photon-energy dependence observed in ARPES. DFT also predicts the split-off of 1D electron-like step and terrace bands dispersing parallel to surface steps., This research was supported by the CERCA Programme/Generalitat de Catalunya, and funded by the Spanish Ministry of Science, Innovation and Universities (Grants MAT2016-78293-C6 (2-R, 4-R and 6-R), MAT-2017-88374-P and Severo Ochoa No. SEV-2017-0706), the Basque Government (Grant IT-1255-19), the regional Government of Aragón (RASMIA project) and the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of 4f filling on electronic and magnetic properties of rare earth-Au surface compounds

  • Fernández, Laura
  • Blanco-Rey, María
  • Castrillo-Bodero, Rodrigo
  • Ilyn, Max
  • Ali, Khadiza
  • Turco, Elia
  • Corso, Martina
  • Ormaza, Maider
  • Gargiani, Pierluigi
  • Valbuena, Miguel A.
  • Mugarza, Aitor
  • Moras, Paolo
  • Sheverdyaeva, P. M.
  • Kundu, A. K.
  • Jugovac, M.
  • Laubschat, Clemens
  • Ortega, J. Enrique
  • Schiller, Frederik
One-atom-thick rare-earth/noble metal (RE-NM) compounds are attractive materials to investigate two-dimensional magnetism, since they are easy to synthesize into a common RE-NM2 structure with high crystal perfection. Here we perform a comparative study of the GdAu2, HoAu2, and YbAu2 monolayer compounds grown on Au(111). We find the same atomic lattice quality and moiré superlattice periodicity in the three cases, but different electronic properties and magnetism. The YbAu2 monolayer reveals the characteristic electronic signatures of a mixed-valence configuration in the Yb atom. In contrast, GdAu2 and HoAu2 show the trivalent character of the rare-earth and ferromagnetic transitions below 22 K. Yet, the GdAu2 monolayer has an in-plane magnetic easy-axis, versus the out-of-plane one in HoAu2. The electronic bands of the two trivalent compounds are very similar, while the divalent YbAu2 monolayer exhibits different band features. In the latter, a strong 4f–5d hybridization is manifested in neatly resolved avoided crossings near the Fermi level. First principles theory points to a residual presence of empty 4f states, explaining the fluctuating valence of Yb in the YbAu2 monolayer., This work was supported in part by the Spanish MINECO (MAT-2017-88374-P, MAT2016-78293-C6, FIS2016-75862-P, PGC2018-098613-B-C21, SEV-2017-0706 and SEV-2016-0686), the Spanish Research Agency (PID2019-107338RB-C65), Basque Government Project IT-1255-19, and University of the Basque Country (UPV/EHU) grant GIU18/138 and the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI). The experiments at Elettra were supported by the EU Calipso project and computational resources were provided by the DIPC computing center. L. F. acknowledges financial support from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement MagicFACE No 797109. A. K. K., M. J., P. M. S. and P. M. acknowledge the project EUROFEL-ROADMAP ESFRI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoelectron diffraction for probing valency and magnetism of 4f -based materials: A view on valence-fluctuating EuIr2Si2

  • Usachov, Dmitry Yu.
  • Tarasov, Artem V.
  • Schulz, Susanne
  • Bokai, Kirill A.
  • Tupitsyn, I. I.
  • Poelchen, Georg
  • Seiro, Silvia
  • Caroca-Canales, N.
  • Kliemt, Kristin
  • Mende, Max
  • Kummer, Kurt
  • Krellner, Cornelius
  • Muntwiler, Matthias
  • Li, Hang
  • Laubschat, Clemens
  • Geibel, Christoph
  • Chulkov, Eugene V.
  • Fujimori, S. I.
  • Vyalikh, Denis V.
We present and discuss the methodology for modeling 4f photoemission spectra, 4f photoelectron diffraction (PED) patterns, and magnetic dichroism effects for rare-earth-based materials. Using PED and magnetic dichroism in photoemission, we explore the electronic and magnetic properties of the near-surface region of the valence-fluctuating material EuIr2Si2. For the Eu-terminated surface, we found that the topmost Eu layer is divalent and exhibits a ferromagnetic order below 10 K. The valency of the next Eu layer, that is the fifth atomic layer, is about 2.8 at low temperature that is close to the valency in the bulk. The properties of the Si-terminated surface are drastically different. The first subsurface Eu layer (fourth atomic layer below the surface) behaves divalently and orders ferromagnetically below 48 K. Experimental data indicate, however, that there is an admixture of trivalent Eu in this layer, resulting in its valency of about 2.1. The next deeper lying Eu layer (eighth atomic layer below the surface) behaves mixed valently, but the estimated valency of 2.4 is notably lower than the value in the bulk. The presented approach and obtained results create a background for further studies of exotic surface properties of 4f-based materials, and allow us to derive information related to valency and magnetism of individual rare-earth layers in a rather extended area near the surface., This work was supported by the Russian Foundation for Basic Research (Grant No. 20-32-70127), the Ministry of Science and Higher Education of the Russian Federation [Grant No. 075-15-2020-797 (13.1902.21.0024)], Saint Petersburg State University (Grant No. ID 51126254), and the German Research Foundation (DFG) through Grants No. KR3831/5-1, No. LA655/20-1, No. GRK1621, No. SFB1143 (Project No. 247310070), and ProjectNo. 422213477–TRR 288. D.V.V. acknowledges financial support from the Spanish Ministry of Economy (MAT-2017-88374-P). E.V.Ch. acknowledges the Tomsk State University competitiveness improvement program (Grant No. 8.1.01.2018). S.I.F. acknowledges Japan Society for the Promotion of Science (KAKENHI Grant No. JP16H01084)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomically-precise texturing of hexagonal boron nitride nanostripes

  • Ali, Khadiza
  • Fernández, Laura
  • Kherelden, Mohammad
  • Makarova, Anna A.
  • Píš, Igor
  • Bondino, Federica
  • Lawrence, James
  • Oteyza, Dimas G. de
  • Usachov, Dmitry Yu.
  • Vyalikh, Denis V.
  • García de Abajo, Francisco Javier
  • Abd El-Fattah, Zakaria M.
  • Ortega, J. Enrique
  • Schiller, Frederik
Monolayer hexagonal boron nitride (hBN) is attracting considerable attention because of its potential applications in areas such as nano- and opto-electronics, quantum optics and nanomagnetism. However, the implementation of such functional hBN demands precise lateral nanostructuration and integration with other two-dimensional materials, and hence, novel routes of synthesis beyond exfoliation. Here, a disruptive approach is demonstrated, namely, imprinting the lateral pattern of an atomically stepped one-dimensional template into a hBN monolayer. Specifically, hBN is epitaxially grown on vicinal Rhodium (Rh) surfaces using a Rh curved crystal for a systematic exploration, which produces a periodically textured, nanostriped hBN carpet that coats Rh(111)-oriented terraces and lattice-matched Rh(337) facets with tunable width. The electronic structure reveals a nanoscale periodic modulation of the hBN atomic potential that leads to an effective lateral semiconductor multi-stripe. The potential of such atomically thin hBN heterostructure for future applications is discussed., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (Grants MAT-2017-88374-P, PID2019-107338RB-C63, MAT2017-88492-R, and Severo Ochoa CEX2019-000910-S), the CSIC (Grant 2020AEP178), the Basque Government (Grant IT-1255-19), the Marie Sklodowska-Curie European Union's Horizon 2020 program (grant MagicFACE 797109), the European Research Council (Advanced Grant 789104-eNANO), and Elettra Sincrotrone Trieste for providing access to its synchrotron radiation facilities. I.P. and F.B. acknowledge funding from EUROFEL, and D.U. from the Ministry of Science and Higher Education of the Russian Federation [Grant No. 075-15-2020-797 (13.1902.21.0024)]. A.A.M. acknowledges the German Ministry for Education and Research (Grant 05K19KER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Classical and cubic Rashba effect in the presence of in-plane 4f magnetism at the iridium silicide surface of the antiferromagnet GdIr2Si2

  • Schulz, Susanne
  • Vyazovskaya, Alexandra Yu.
  • Poelchen, Georg
  • Generalov, Alexander
  • Güttler, Monika
  • Mende, Max
  • Danzenbächer, Steffen
  • Otrokov, Mikhail M.
  • Balasubramanian, T.
  • Polley, Craig
  • Chulkov, Eugene V.
  • Laubschat, Clemens
  • Peters, Marius
  • Kliemt, Kristin
  • Krellner, Cornelius
  • Usachov, Dmitry Yu.
  • Vyalikh, Denis V.
We present a combined experimental and theoretical study of the two-dimensional electron states at the iridium-silicide surface of the antiferromagnet GdIr2Si2 above and below the Néel temperature. Using angle-resolved photoemission spectroscopy (ARPES) we find a significant spin-orbit splitting of the surface states in the paramagnetic phase. By means of ab initio density-functional-theory (DFT) calculations we establish that the surface electron states that reside in the projected band gap around the ¯¯¯¯M point exhibit very different spin structures which are governed by the conventional and the cubic Rashba effect. The latter is reflected in a triple spin winding, i.e., the surface electron spin reveals three complete rotations upon moving once around the constant energy contours. Below the Néel temperature, our ARPES measurements show an intricate photoemission intensity picture characteristic of a complex magnetic domain structure. The orientation of the domains, however, can be clarified from a comparative analysis of the ARPES data and their DFT modeling. To characterize a single magnetic domain picture, we resort to the calculations and scrutinize the interplay of the Rashba spin-orbit coupling field with the in-plane exchange field, provided by the ferromagnetically ordered 4f moments of the near-surface Gd layer., This work was supported by the German Research Foundation (DFG) through Grants No. KR3831/5-1, No. LA655/20-1, No. GRK1621, No. SFB1143 (Project No. 247310070). We acknowledge support from the Russian Foundation for Basic Research (Grant No. 20-32-70127) and Saint Petersburg State University (Grant No. ID 51126254). M.M.O. acknowledges the support by Spanish Ministerio de Ciencia e Innovación (Grant No. PID2019-103910GB-I00). A.Yu.V. acknowledges the support by RFBR, Project No. 19-32-90251. D.V.V. acknowledges financial support from the Spanish Ministry of Economy (MAT-2017-88374-P). We acknowledge MAX IV Laboratory for time on the Bloch Beamline under Proposal 20190824. Research conducted at MAX IV, a Swedish national user facility, is supported by the Swedish Research council under contract 2018-07152, the Swedish Governmental Agency for Innovation Systems under contract 2018-04969, and Formas under contract 2019-02496. The authors gratefully acknowledge the GWK support for funding this work by providing computing time through the Center for Information Services and HPC (ZIH) at TU Dresden., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitrogen-doped graphene on a curved nickel surface

  • Vilkov, Oleg Yu.
  • Tarasov, Artem V.
  • Bokai, Kirill A.
  • Makarova, Anna A.
  • Muntwiler, Matthias
  • Schiller, Frederik
  • Ortega, J. Enrique
  • Yashina, Lada V.
  • Vyalikh, Denis V.
  • Usachov, Dmitry Yu.
Graphene growth and doping are well studied on flat surfaces of various materials. To further advance the technological implementation of graphene-based systems, fundamental studies need more appropriate model templates, whose surfaces would mimic substrates with non-trivial topography. Here, using electron and photoelectron diffraction and photoemission spectroscopy as well, we demonstrate how a curved tungsten crystal covered by a thin nickel film can properly be used as such platform, allowing the fabrication and comprehensive characterization of nitrogen-doped graphene. We show the way in which nitrogen impurities prefer to embed into the graphene matrix at different areas of the curved metallic surface with variable density of atomic steps. In particular, at atomically flat regions with a strong graphene-metal interaction, pyridinic configuration is the most abundant form of dopants, while graphitic nitrogen strongly dominates in places with a weak coupling of graphene to the substrate, i.e., in the vicinity of the surface irregularities. We recognize single crystals with curvilinear surfaces as versatile platforms for the studies of not only low-dimensional materials, but also molecular adsorption, chemical reactions and catalysis on surfaces with complex structure., The authors acknowledge RFBR for research Grants No. 18-29-19178 and No. 19-32-90013, and SPbU Grant No. 73028629. A. M. acknowledges BMBF Grant No. 05K19KER. F. S., D. V. V. and J. E. O. acknowledge the Spanish Ministry of Science and Innovation (Grants MAT-2017-88374-P), Consejo Superior de Investigaciones Cientificas (Grant 2020AEP178) and the Basque Government (Grant IT-1255-19). The authors thank the Helmholtz-Zentrum Berlin für Materialien und Energie for support within the bilateral Russian-German Laboratory program. This work was supported by the German-Russian Interdisciplinary Science Center (G-RISC: M-2019b-13_r) funded by the German Federal Foreign Office via the German Academic Exchange Service (DAAD)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduced carbon monoxide saturation coverage on vicinal palladium surfaces: the importance of the adsorption site

  • Garcia-Martinez, Fernando
  • Dietze, Elisabeth
  • Schiller, Frederik
  • Gajdek, Dorotea
  • Merte, Lindsay R.
  • Gericke, Sabrina M.
  • Zetterberg, Johan
  • Albertin, Stefano
  • Lundgren, Edvin
  • Grönbeck, Henrik
  • Ortega, J. Enrique
Steps at metal surfaces may influence energetics and kinetics of catalytic reactions in unexpected ways. Here, we report a significant reduction of the CO saturation coverage in Pd vicinal surfaces, which in turn is relevant for the light-off of the CO oxidation reaction. The study is based on a systematic investigation of CO adsorption on vicinal Pd(111) surfaces making use of a curved Pd crystal. A combined X-ray Photoelectron Spectroscopy and DFT analysis allows us to demonstrate that an entire row of atomic sites under Pd steps remains free of CO upon saturation at 300 K, leading to a step-density-dependent reduction of CO coverage that correlates with the observed decrease of the light-off temperature during CO oxidation in vicinal Pd surfaces., We acknowledge financial support from the Spanish Ministry of Science and Innovation (Grants MAT-2017-88374-P, PID2019-107338RB-C63, PID2020-116093RB-C44), the Basque Government (Grants IT-1255-19), the Knut and Alice Wallenberg foundation (DNR KAW 2015.0058 ”Atomistic Design of new Catalysts”), and the Swedish Research Council (DNR 349-2011-6491 “Catalysis on the Atomic Scale”). Financial support is acknowledged from the Swedish Research Council (2016-5234). The DFT calculations were performed at C3SE (Göteborg) via a SNIC grant. We acknowledge MAX IV Laboratory support, in particular Alexei Preobrajenski, for their help in synchrotron experiments, which were carried out at the FlexPES beamline under Proposal 20190717. Research conducted at MAX IV, a Swedish national user facility, is supported by the Swedish Research council under contract 2018-07152, the Swedish Governmental Agency for Innovation Systems under contract 2018-04969, and Formas under contract 2019-02496. Moreover, the research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reference plane for the electronic states in thin films on stepped surfaces

  • Moras, Paolo
  • Menteş, Tevfik Onur
  • Schiller, Frederik
  • Ferrari, Luisa
  • Topwal, D.
  • Locatelli, A.
  • Sheverdyaeva, P. M.
  • Carbone, Carlo
The question on whether there exists a unique photoelectron reference plane for a stepped solid surface is discussed on the basis of angle-resolved photoelectron spectroscopy data for Ag films grown on Pt(997). Different step morphologies at the surface and interface, revealed by low-energy electron diffraction measurements, result in distinctly different band dispersions of the sp-like quantum well states and of the Shockley surface state. Quantum well standing waves form between the parallel optical surface and interface planes, while the surface state follows the orientation of a local plane tilted with respect to the optical surface. These findings show the connection of the photoelectron reference plane with the local morphology of a solid surface and the spatial extent of the electron wave functions., This work has been partially funded through the project EUROFEL-ROADMAP ESFRI and by the Spanish Ministry of Science and Innovation (Grant No. MAT-2017-88374-P) and the Basque Government (Grant No. IT-1255-19), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Band structure and energy level alignment of chiral graphene nanoribbons on silver surfaces

  • Corso, Martina
  • Menchón, Rodrigo E.
  • Piquero-Zulaica, Ignacio
  • Vilas-Varela, Manuel
  • Ortega, J. Enrique
  • Peña, Diego
  • Garcia-Lekue, Aran
  • Oteyza, Dimas G. de
This article belongs to the Special Issue On-Surface Synthesis of Low-Dimensional Organic Nanostructures., Chiral graphene nanoribbons are extremely interesting structures due to their narrow band gaps and potential development of spin-polarized edge states. Here, we study their band structure on low work function silver surfaces. The use of a curved Ag single crystal provides, within the same sample, regions of disparate step structure and step density. Whereas the former leads to distinct azimuthal growth orientations of the graphene nanoribbons atop, the latter modulates the substrate’s work function and thereby the interface energy level alignment. In turn, we disclose the associated charge transfer from the substrate to the ribbon and assess its effect on the nanoribbon’s properties and the edge state magnetization., We acknowledge financial support from MCIN/AEI/10.13039/501100011033 (grant nos. PID2019-107338RB-C62, PID2019-107338RB-C63, PID2019-107338RB-C66, and PCI2019-111933-2 and MAT-2017-88374-P), the European Union’s Horizon 2020 research and innovation program (FET Open project SPRING, grant no. 863098), the Xunta de Galicia (Centro Singular de Investigación de Galicia, 2019–2022, grant no. ED431G2019/03), the European Regional Development Fund, the Basque Government (Grant IT-1255-19), Gobierno Vasco-UPV/EHU (Project No. IT1246-19) and the Dpto. Educación Gobierno Vasco (Grant No. PIBA-2020-1-0014)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the valence state on the band magnetocrystalline anisotropy in two-dimensional rare-earth/noble-metal compounds

  • Blanco-Rey, María
  • Castrillo-Bodero, Rodrigo
  • Ali, Khadiza
  • Gargiani, Pierluigi
  • Bertram, Florian
  • Sheverdyaeva, P. M.
  • Ortega, J. Enrique
  • Fernández, Laura
  • Schiller, Frederik
In intermetallic compounds with zero orbital momentum (L=0) the magnetic anisotropy and the electronic band structure are interconnected. Here, we investigate this connection in divalent Eu and trivalent Gd intermetallic compounds. We find by x-ray magnetic circular dichroism an out-of-plane easy magnetization axis in two-dimensional atom-thick EuAu2. Angle-resolved photoemission spectroscopy and density-functional theory prove that this is due to strong f−d band hybridization and Eu2+ valence. In contrast, the easy in-plane magnetization of the structurally equivalent GdAu2 is ruled by spin-orbit-split d bands, notably Weyl nodal lines, occupied in the Gd3+ state. Regardless of the L value, we predict a similar itinerant electron contribution to the anisotropy of analogous compounds., Financial support from Spanish Ministerio de Ciencia e Innovación (projects MAT-2017-88374-P, PID2020116093RB-C44 and PID2019-103910GB-I00 funded by MCIN/AEI/10.13039/501100011033/), the Basque Government (Grants No. IT-1255-19 and No. IT1260-19), and the University of the Basque Country UPV/EHU (Grant No. GIU18/138) is acknowledged. L.F. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the carrier injection barrier of hybrid metal–organic interfaces on rare earth-gold surface compounds

  • Castrillo-Bodero, Rodrigo
  • Blanco-Rey, María
  • Ali, Khadiza
  • Ortega, J. Enrique
  • Schiller, Frederik
  • Fernández, Laura
Magnetic hybrid metal–organic interfaces possess a great potential in areas such as organic spintronics and quantum information processing. However, tuning their carrier injection barriers on-demand is fundamental for the implementation in technological devices. We have prepared hybrid metal–organic interfaces by the adsorption of copper phthalocyanine CuPc on REAu2 surfaces (RE = Gd, Ho and Yb) and studied their growth, electrostatics and electronic structure. CuPc exhibits a long-range commensurability and a vacuum level pinning of the molecular energy levels. We observe a significant effect of the RE valence of the substrate on the carrier injection barrier of the hybrid metal–organic interface. CuPc adsorbed on trivalent RE-based surfaces (HoAu2 and GdAu2) exhibits molecular level energies that may allow injection carriers significantly closer to an ambipolar injection behavior than in the divalent case (YbAu2)., This work was financial supported by Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I funded by MCIN/AEI/10.13039/501100011033/ and by “ESF investing in your future”), and the Basque Government (grants No. IT-1591-22, IT-1527-22). L. F. acknowledges funding from the European Union's Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109. Computational resources were provided by DIPC. Part of the research leading to this results has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. We further aknowledge Polina M. Sheverdyaeva and Paolo Moras for the assistance in the VUV-Photoemission beam line of Elettra Synchrotron in Trieste., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin-polarizing electron beam splitter from crossed graphene nanoribbons

  • Sanz, Sofía
  • Papior, Nick
  • Giedke, Géza
  • Sánchez-Portal, Daniel
  • Brandbyge, Mads
  • Frederiksen, Thomas
Junctions composed of two crossed graphene nanoribbons (GNRs) have been theoretically proposed as electron beam splitters where incoming electron waves in one GNR can be split coherently into propagating waves in two outgoing terminals with nearly equal amplitude and zero back-scattering. Here we scrutinize this effect for devices composed of narrow zigzag GNRs taking explicitly into account the role of Coulomb repulsion that leads to spin-polarized edge states within mean-field theory. We show that the beam-splitting effect survives the opening of the well-known correlation gap and, more strikingly, that a spin-dependent scattering potential emerges which spin polarizes the transmitted electrons in the two outputs. By studying different ribbons and intersection angles we provide evidence that this is a general feature with edge-polarized nanoribbons. A near-perfect polarization can be achieved by joining several junctions in series. Our findings suggest that GNRs are interesting building blocks in spintronics and quantum technologies with applications for interferometry and entanglement., This work was financial supported by Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I funded by MCIN/AEI/10.13039/501100011033/ and by “ESF investing in your future”), and the Basque Government (grants No. IT-1591-22, IT-1527-22). L. F. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie Grant Agreement MagicFACE No. 797109. Computational resources were provided by DIPC. Part of the research leading to this results has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Europium intercalation as a route to modulate electronic and magnetic properties of h-BN/Ni(111)

  • Voloshina, Elena
  • Schiller, Frederik
  • Ali, Khadiza
  • Idris Bakhit, Alaa Mohammed
  • Castrillo-Bodero, Rodrigo
  • Paulus, Beate
  • Dedkov, Yuriy
This article is part of the themed collection: 2025 Nanoscale HOT Article Collection., We present a combined density functional theory (DFT) and photoelectron spectroscopy (PES) study of the electronic and magnetic properties of the intercalation-like system, where europium (Eu) is intercalated at the interface between hexagonal boron nitride (h-BN) and a Ni(111) substrate. From the theory side two interface models are considered: (i) a sharp h-BN/Eu/Ni(111) structure and (ii) an interfacial EuNi5 alloy. In both cases, Eu intercalation restores the π-band dispersion of h-BN and induces doping effects, with the energy shift of the π-band at the Γ point found to be highly sensitive to the interfacial structure. Our results show that Eu retains a localized magnetic moment in both configurations, with distinct coupling to the substrate. Simulated B 1s and N 1s core-level shifts and near-edge X-ray absorption spectra provide further insights into the local bonding environment and interfacial interaction strength. Further systematic electron diffraction and PES experiments support the formation of the sharp h-BN/Eu/Ni(111) interface as derived from the matching of experimentally derived positions of B 1s and N 1s core-levels as well as valence bands dispersions to the theoretical results. These findings offer a framework for understanding the role of rare-earth intercalation in tuning the properties of 2D/metal interfaces and pave the way for future spintronic applications., E. V. acknowledges the support by the European Union's NextGenerationEU program. Y. D. acknowledge the support by the project Centre for Advanced Laser Techniques (CALT), co-funded by the European Union through the European Regional Development Fund under the Competitiveness and Cohesion Operational Programme (Grant No. KK.01.1.1.05.0001). The authors gratefully acknowledges the computing time granted by the Resource Allocation Board and provided on the supercomputer Lise at NHR@ZIB as part of the NHR infrastructure. The calculations for this research were conducted with computing resources under the project bec00256. Experiments at Elettra were performed with the help of the beamline scientists P. Moras, P. M. Sheverdyaeva, and A. K. Kundu. This experiment has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. The authors thank financial support from Spanish MINECO (MAT-2017-88374-P), PID2023-149158OB-C44 funded by MICIU/AEI/10.13039/501100011033/ and Basque Government Projects IT-1255-19 and IT-1591-22 as well as from Gipuzkoa Next program of the Diputación Foral de Gipuzkoa DFG-2023-CIEN-000077., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic and electronic properties of hybrid metal–organic interfaces on rare earthgold surface compounds

  • Fernández, Laura
  • Castrillo-Bodero, Rodrigo
  • Blanco-Rey, María
  • Ali, Khadiza
  • Ortega, J. Enrique
  • Schiller, Frederik
Resumen del trabajo presentado al 13th Joint European Magnetic Symposia (JEMS), celebrado en Madrid del 27 de agosto al 1 de septiembre de 2023., Fundamental knowledge of magnetic and electronic interaction phenomena that takes place at the hybrid metalorganic interface is decisive to explore the possibility to create highly spin-polarized spinterfaces to enhance the performance of organic spintronic devices. To this end, tailoring magnetic properties on structurally robust substrates is crucial. Rare-earth/noble metal monolayer alloys, grown on gold surfaces, possess a big potential as nanostructured magnetic templates with structural stability. Different elements of the lanthanide series have been observed to form surface-confined alloys in Au(111), characterized by a high crystal quality and nanoscale periodic corrugation. We have prepared hybrid metal–organic interfaces by the adsorption of copper phthalocyanine CuPc on REAu2 monolayers (RE = Gd, Ho and Yb) and studied their growth, electrostatics, electronic structure and magnetic properties. We observe a significant effect of the RE valence of the substrate on the carrier injection barrier of the hybrid metal–organic interface. CuPc adsorbed on trivalent RE-based surfaces (HoAu2 and GdAu2) exhibits molecular level energies that may allow injection carriers significantly closer to an ambipolar injection behavior than in the divalent case (YbAu2). Moreover, the magnetic exchange coupling between the ferromagnetic surfaces (HoAu2 and GdAu2) and the CuPc layer is explored, studing the effect of the RE atom on the magnetic behavior of the hybrid metal-organic interface., The authors acknowlege Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I and the Basque Government (grants No. IT-1591-22, IT-152722), the EU Horizon 2020 through the Marie Skłodowska-Curie Grant MagicFACE No. 797109., No
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of 4f filling on electronic and magnetic properties of rare earth-Au surface compounds

  • Fernandez Gomez-Recuero, Laura|||0000-0002-4818-1125
  • Blanco Rey, Maria|||0000-0002-5189-6690
  • Castrillo-Bodero, R.
  • Ilyn, Maxim|||0000-0002-4052-7275
  • Ali, Khadiza|||0000-0001-5780-477X
  • Turco, Elia|||0000-0002-6437-9334
  • Corso, Martina|||0000-0002-8592-1284
  • Ormaza, Maider|||0000-0002-7278-5308
  • Gargiani, Pierluigi|||0000-0002-6649-0538
  • Valbuena, Miguel Ángel|||0000-0002-0585-5636
  • Mugarza, Aitor|||0000-0002-2698-885X
  • Moras, Paolo|||0000-0002-7771-8737
  • Sheverdyaeva, Polina|||0000-0002-4231-1638
  • Kundu, Asish K.|||0000-0003-2199-1053
  • Jugovac, Matteo|||0000-0001-9525-3980
  • Laubschat, C.
  • Ortega Conejero, Enrique|||0000-0002-6643-806X
  • Schiller, Frederik|||0000-0003-1727-3542
One-atom-thick rare-earth/noble metal (RE-NM) compounds are attractive materials to investigate two-dimensional magnetism, since they are easy to synthesize into a common RE-NM2 structure with high crystal perfection. Here we perform a comparative study of the GdAu2, HoAu2, and YbAu2 monolayer compounds grown on Au(111). We find the same atomic lattice quality and moiré superlattice periodicity in the three cases, but different electronic properties and magnetism. The YbAu2 monolayer reveals the characteristic electronic signatures of a mixed-valence configuration in the Yb atom. In contrast, GdAu2 and HoAu2 show the trivalent character of the rare-earth and ferromagnetic transitions below 22 K. Yet, the GdAu2 monolayer has an in-plane magnetic easy-axis, versus the out-of-plane one in HoAu2. The electronic bands of the two trivalent compounds are very similar, while the divalent YbAu2 monolayer exhibits different band features. In the latter, a strong 4f-5d hybridization is manifested in neatly resolved avoided crossings near the Fermi level. First principles theory points to a residual presence of empty 4f states, explaining the fluctuating valence of Yb in the YbAu2 monolayer.