Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchy in the halogen activation during surface-promoted ullmann coupling

  • Merino-Díez, Nestor
  • Pérez Paz, Alejandro
  • Li, Jingcheng
  • Vilas-Varela, Manuel
  • Lawrence, James
  • Mohammed, Mohammed S. G.
  • Berdonces-Layunta, Alejandro
  • Barragán, Ana
  • Pascual, José I.
  • Lobo-Checa, Jorge
  • Peña, Diego
  • Oteyza, Dimas G. de
Within the collection of surface-supported reactions currently accessible for the production of extended molecular nanostructures under ultra-high vacuum, Ullmann coupling has been the most successful in the controlled formation of covalent single C−C bonds. Particularly advanced control of this synthetic tool has been obtained by means of hierarchical reactivity, commonly achieved by the use of different halogen atoms that consequently display distinct activation temperatures. Here we report on the site-selective reactivity of certain carbon-halogen bonds. We use precursor molecules halogenated with bromine atoms at two non-equivalent carbon atoms and found that the Ullmann coupling occurs on Au(111) with a remarkable predilection for one of the positions. Experimental evidence is provided by means of scanning tunneling microscopy and core level photoemission spectroscopy, and a rationalized understanding of the observed preference is obtained from density functional theory calculations., The project leading to this publication has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No 635919), from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, Grant Nos. MAT2016‐78293‐C6‐R) and María de Maeztu Units of Excellence Program MDM‐2026‐0618. We also acknowledge financial support from the Xunta de Galicia (Centro singular de investigación de Galicia, accreditation 2016–2019, ED431G/09) and Fondo Europeo de Desarrollo Regional (FEDER). This work used the “Imbabura” computer cluster of Yachay Tech University, which was purchased under contract No. 2017‐024 (SIE‐UITEY‐007‐2017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetism of topological boundary states induced by boron substitution in graphene nanoribbons

  • Friedrich, Niklas
  • Brandimarte, Pedro
  • Li, Jingcheng
  • Saito, Shohei
  • Yamaguchi, Shigehiro
  • Pozo, Iago
  • Peña, Diego
  • Frederiksen, Thomas
  • Garcia-Lekue, Aran
  • Sánchez-Portal, Daniel
  • Pascual, José I.
Graphene nanoribbons (GNRs), low-dimensional platforms for carbon-based electronics, show the promising perspective to also incorporate spin polarization in their conjugated electron system. However, magnetism in GNRs is generally associated with localized states around zigzag edges, difficult to fabricate and with high reactivity. Here we demonstrate that magnetism can also be induced away from physical GNR zigzag edges through atomically precise engineering topological defects in its interior. A pair of substitutional boron atoms inserted in the carbon backbone breaks the conjugation of their topological bands and builds two spin-polarized boundary states around them. The spin state was detected in electrical transport measurements through boron-substituted GNRs suspended between the tip and the sample of a scanning tunneling microscope. First-principle simulations find that boron pairs induce a spin 1, which is modified by tuning the spacing between pairs. Our results demonstrate a route to embed spin chains in GNRs, turning them into basic elements of spintronic devices., We gratefully acknowledge financial support from Spanish Agencia Estatal de Investigación (AEI) (MAT2016-78293, PID2019-107338RB, FIS2017-83780-P, and the Maria de Maeztu Units of Excellence Programme MDM-2016-0618), from the European Union (EU) through Horizon 2020 (FET-Open project SPRING Grant. No. 863098), the Basque Departamento de Educación through the PhD fellowship No. PRE_2019_2_0218 (S.S.), the Xunta de Galicia (Centro de Investigación de Galicia accreditation 2019–2022, ED431G 2019/03), the University of the Basque Country (Grant IT1246-19), and the European Regional Development Fund (ERDF). I. P. also thanks Xunta de Galicia and European Union (European Social Fund, ESF) for the award of a predoctoral fellowship-, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Atomically precise step grids for the engineering of helical states

  • Ortega, J. Enrique
  • Vasseur, Guillaume
  • Piquero-Zulaica, Ignacio
  • Schiller, Frederik
  • Raoult, Julien
  • Valbuena, Miguel A.
  • Schirone, S.
  • Matencio, Sonia
  • Mugarza, Aitor
  • Lobo-Checa, Jorge
Trabajo presentado al Symposium on Surface Science (3S), celebrado en St. Christoph am Arlberg (Austria) del 1 al 7 de marzo de 2020., Conventional spin-degenerated surface electrons have been effectively manipulated by using organic and inorganic self-assembled nano-arrays as resonators. Step superlattices naturally assembled in vicinal surfaces are a particularly interesting case since they represent simple one-dimensional (1D) models for fundamental studies, and can imprint strong anisotropies in surface electron transport in real devices. Here we present the first realization of periodic resonator arrays on the BiAg2 atom-thick surface alloy with unprecedented atomic precision, and demonstrate their potential ability for tuning helical Rashba states. We employ a Ag cylindrical crystal curved around the Ag(645) vicinal surface [c-Ag(645) sample] to be able of selecting local vicinal planes with kinked steps. After sublimation and post-annealing of a 0.3 ML Bi layer, we achieve a homogenous BiAg2 surface alloy, featuring sharp arrays of extraordinarily straight Bi-terminated, monoatomic steps, with variable (tunable) density across the curved surface. Scanning the ultraviolet light beam on such Bi/c-Ag(645) interface in angle-resolved photoemission (ARPES) experiments allowed us to observe the characteristic signatures of strong and coherent step-lattice scattering in the spin-textured bands of the BiAg2 alloy, that is, step-umklapps, and a large, step-density-dependent Rashba band shift. First-principle DFT calculations reveal a complex terrace/step spin/orbital composition, which in turn explains the large spectral broadening and strong photon-energy dependence observed in ARPES. DFT also predicts the split-off of 1D electron-like step and terrace bands dispersing parallel to surface steps., This research was supported by the CERCA Programme/Generalitat de Catalunya, and funded by the Spanish Ministry of Science, Innovation and Universities (Grants MAT2016-78293-C6 (2-R, 4-R and 6-R), MAT-2017-88374-P and Severo Ochoa No. SEV-2017-0706), the Basque Government (Grant IT-1255-19), the regional Government of Aragón (RASMIA project) and the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (Contract No. EFA 194/16 TNSI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Why a good catalyst can turn out detrimental to good polymerization

  • Abadia, Mikel
  • Brede, Jens
  • Verdini, Alberto
  • Floreano, Luca
  • Nita, Pawel
  • Oteyza, Dimas G. de
  • Ortega, J. Enrique
  • Corso, Martina
  • Rogero, Celia
Steps at metal surfaces are chemically active sites, and hence they have an enormous influence on catalytic reactions. However, their higher catalytic activity does not necessarily imply improving the efficiency in more complex reactions, such as Ullmann coupling. Here, by investigating the interplay of step and terrace sites in the polymerization of 4,4″-dibromo-para-terphenyl molecules on Au to form poly-p-phenylene (PPP), we demonstrate that the restriction in molecular diffusion imposed by steps makes polymerization difficult. Combining a battery of surface-sensitive techniques, we have monitored the entire Ullmann polymerization process across different crystal planes by using a crystal surface macroscopically curved around the (111) plane. With this approach, it is possible to smoothly tune the step type and density across the sample, while keeping all reaction parameters identical, to prove that despite the significant reduction of debromination temperature near atomic steps, there is a delay in the formation of long PPP chains at densely stepped planes. Thus, we disentangle the different reaction steps and determine how to speed up and optimize the entire process through a proper choice of the vicinal orientation of the substrate., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MAT2016-78293-C6-R and PID2019-107338RB-C63), from the Basque Government (IT-1255-19), from the Spanish Research Council (ILINKC20002), from the European Regional Development Fund (ERDF) under the program Interreg POCTEFA (contract EFA 194/16 TNSI), and from the European Research Council (grant agreement 635919)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Near fermi superatom state stabilized by surface state resonances in a multiporous molecular network

  • Kawai, Shigeki
  • Kher-Elden, Mohammad A.
  • Sadeghi, Ali
  • Abd El-Fattah, Zakaria M.
  • Sun, Kewei
  • Izumi, Saika
  • Minakata, Satoshi
  • Takeda, Youhei
  • Lobo-Checa, Jorge
Two-dimensional honeycomb molecular networks confine a substrate’s surface electrons within their pores, providing an ideal playground to investigate the quantum electron scattering phenomena. Besides surface state confinement, laterally protruding organic states can collectively hybridize at the smallest pores into superatom molecular orbitals. Although both types of pore states could be simultaneously hosted within nanocavities, their coexistence and possible interaction are unexplored. Here, we show that these two types of pore states do coexist within the smallest nanocavities of a two-dimensional halogen-bonding multiporous network grown on Ag(111) studied using a combination of scanning tunneling microscopy and spectroscopy, density functional theory calculations, and electron plane wave expansion simulations. We find that superatom molecular orbitals undergo an important stabilization when hybridizing with the confined surface state, following the significant lowering of its free-standing energy. These findings provide further control over the surface electronic structure exerted by two-dimensional nanoporous systems., We acknowledge the financial support from the Japan Society for the Promotion of Science (JSPS) KAKENHI (19H00856, JP17H05155, and 21F21058), from the Iran Science Elites Federation (M/99118), from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO, MAT2016-78293-C6-R6 and PID2019-107338RB-C64), from the regional Government of Aragon (E12-20R), and from the European Regional Development Fund (ERDF) under the program Interreg V-A España-Francia-Andorra (EFA 194/16 TNSI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation, supramolecular organization, and on-surface reactivity of enantiopure subphthalocyanines: From bulk to 2D-polymerization

  • Labella, Jorge
  • Lavarda, Giulia
  • Hernández-López, Leyre
  • Aguilar-Galindo, Fernando
  • Díaz-Tendero, Sergio
  • Lobo-Checa, Jorge
  • Torres, Tomás
The development of chiral materials is severely limited by the challenge to achieve enantiopure derivatives with both configurational stability and good optoelectronic properties. Herein we demonstrate that enantiopure subphthalocyanines (SubPcs) fulfill such demanding requirements and bear the prospect of becoming components of chiral technologies. Particularly, we describe the synthesis of enantiopure SubPcs and assess the impact of chirality on aspects as fundamental as the supramolecular organization, the behavior in contact with metallic surfaces, and the on-surface reactivity and polymerization. We find that enantiopure SubPcs remarkably tend to organize in columnar polar assemblies at the solid state and highly ordered chiral superstructures on Au(111) surfaces. At the metal interface, such SubPcs are singled out by scanning tunneling microscopy. DFT calculations suggest that SubPcs undergo a bowl-to-bowl inversion that was shown to be dependent on the axial substituent. Finally, we polymerize by means of on-surface synthesis a highly regular 2D, porous and chiral, π-extended polymer that paves the way to future nanodevice fabrication., We gratefully acknowledge financial support from the Spanish MINECO and MICINN through Projects PID2020-116490GB-I00, MAT2016-78293-C6-R6, PID2019-107338RBC64, AEI/10.13039/501100011033, RED2018-102833-T, PID2019-110091GB-I00, and the “María de Maeztu” (CEX2018-000805-M) Program for Centers of Excellence in R&D, including the Spanish Research Agency (AEI) and the European Regional Development Fund (ERDF) and the Regional Government of Aragon (E12-20R). IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV2016-0686). J.L. and G.L. acknowledge MECD, Spain, for a F.P.U. fellowship., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Preparation, supramolecular organization, and on-surface reactivity of enantiopure subphthalocyanines: from bulk to 2D-polymerization

  • Labella, J.
  • Lavarda, G.
  • Hernández-López, L.
  • Aguilar-Galindo, F.
  • Díaz-Tendero, S.
  • Lobo-Checa, J.
  • Torres, T.
The development of chiral materials is severely limited by the challenge to achieve enantiopure derivatives with both configurational stability and good optoelectronic properties. Herein we demonstrate that enantiopure subphthalocyanines (SubPcs) fulfill such demanding requirements and bear the prospect of becoming components of chiral technologies. Particularly, we describe the synthesis of enantiopure SubPcs and assess the impact of chirality on aspects as fundamental as the supramolecular organization, the behavior in contact with metallic surfaces, and the on-surface reactivity and polymerization. We find that enantiopure SubPcs remarkably tend to organize in columnar polar assemblies at the solid state and highly ordered chiral superstructures on Au(111) surfaces. At the metal interface, such SubPcs are singled out by scanning tunneling microscopy. DFT calculations suggest that SubPcs undergo a bowl-to-bowl inversion that was shown to be dependent on the axial substituent. Finally, we polymerize by means of on-surface synthesis a highly regular 2D, porous and chiral, π-extended polymer that paves the way to future nanodevice fabrication.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Near Fermi Superatom State Stabilized by Surface State Resonances in a Multiporous Molecular Network

  • Kawai S.
  • Kher-Elden M.A.
  • Sadeghi A.
  • Abd El-Fattah Z.M.
  • Sun K.
  • Izumi S.
  • Minakata S.
  • Takeda Y.
  • Lobo-Checa J.
Two-dimensional honeycomb molecular networks confine a substrate''s surface electrons within their pores, providing an ideal playground to investigate the quantum electron scattering phenomena. Besides surface state confinement, laterally protruding organic states can collectively hybridize at the smallest pores into superatom molecular orbitals. Although both types of pore states could be simultaneously hosted within nanocavities, their coexistence and possible interaction are unexplored. Here, we show that these two types of pore states do coexist within the smallest nanocavities of a two-dimensional halogen-bonding multiporous network grown on Ag(111) studied using a combination of scanning tunneling microscopy and spectroscopy, density functional theory calculations, and electron plane wave expansion simulations. We find that superatom molecular orbitals undergo an important stabilization when hybridizing with the confined surface state, following the significant lowering of its free-standing energy. These findings provide further control over the surface electronic structure exerted by two-dimensional nanoporous systems.