Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing|||0000-0002-7620-745X
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto-Huguet, Ivan
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Lu, Xuan|||0000-0003-2453-2805
  • Gupta, Kapil|||0000-0002-4826-6620
  • Botifoll, Marc|||0000-0002-4876-6393
  • Simonelli, Laura|||0000-0001-5331-0633
  • Fauth, François|||0000-0001-9465-3106
  • Zhou, Jin Yuan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Lu, Yan|||0000-0003-3055-0073
  • Zhang, Chao Yue
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly LiS nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid LiS nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Boosting Polysulfide Conversion on Fe-Doped Nickel Diselenide Toward Robust Lithium-Sulfur Batteries

  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Yong
  • Li, Canhuang
  • Ma, Yi
  • Ge, Huan
  • Jian, Ning
  • Li, Luming
  • Zhang, Chao Yue
  • Zhou, Jin Yuan
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur offers a high-energy-density, low-cost, and sustainable alternative to traditional battery cathodes, but its practical use is limited by sluggish and uneven reaction and polysulfide dissolution, necessitating electrocatalytic additives to enhance conversion efficiency. Generating unpaired spin electrons has proven effective in enhancing performance in Co-based electrocatalysts. These unpaired electrons increase polysulfide conversion by enhancing adsorption and weakening S─S bonds, facilitating their cleavage during sulfur reduction reactions. This work extends the strategy to Fe-Ni-based catalysts. The synthesis of NiSe and Fe-doped NiSe particles is reported and investigate the impact of Fe doping on the electronic structure, catalytic activity, and performance of NiSe is introduced as a coating on the cathode side of the Li-S battery (LSB) separator. Experimental analyses and first-principles calculations reveal that Fe-rich cores and surface doping in NiSe enhance the density of states at the Fermi level and introduce unpaired electrons, boosting LiPS adsorption and catalytic conversion. These synergistic effects significantly improve the catalytic performance, cycling stability, and overall performance of LSB cells. Specifically, LSB cells based on Fe-doped NiSe-based separators achieve specific capacities of 1483 mAh g⁻¹ at 0.1C and 1085 mAh g⁻¹ at 1C, along with remarkable cycling stability, retaining 84.4% capacity after 800 cycles. High sulfur-loading tests further validate the multifunctional membrane's effectiveness, showing significant capacity retention and reduced polysulfide loss.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Freestanding perovskite and infinite-layer nickelate membranes

  • Sahib, Hoshang|||0000-0001-6841-7759
  • Schlur, Laurent|||0009-0001-2320-7632
  • Mundet, Bernat|||0000-0003-0608-2070
  • Cordero Edwards, Kumara|||0000-0003-3721-7863
  • Viart, Nathalie|||0000-0002-7851-017X
  • Pesquera, David|||0000-0003-0681-3371
  • Preziosi, Daniele|||0000-0002-6608-7036
Following the discovery of superconductivity in hole-doped NdNiO2 infinite-layer thin films, extensive research has been conducted particularly to compare these materials with cuprates. Superconductivity has also been observed in nickelate thin films with other rare-earth elements such as Pr and La, but not in their bulk forms, suggesting a critical role for substrate-induced strain/interface or dimensionality effects. In this study, we used water-soluble (Ca,Sr)3Al2O6 sacrificial layers to fabricate freestanding perovskite nickelate membranes and explore the phase transformation to infinite layers of the membranes via topotactic reduction in the absence of any template effect from the substrate. Highly metallic NdNiO3 membranes with bulk-like hysteretic metal-to-insulator transitions could be obtained when transferred from a LaAlO3 substrate. The topotactic reduction of these membranes with CaH2 was shown to be successful as characterized by the expected decrease of the out-of-plane cell parameter and absence of apical oxygens. The reduced membranes, however, displayed insulating characteristics similar to those of bulk infinite-layer nickelates. Our findings strongly indicate that a template is necessary to stabilize a coherent and robust infinite-layer phase with optimal transport properties.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering Peripheral Metal-Oxide Catalysis: Interparticle Spacing in Cu/ZrO2 Catalysts for Methanol Synthesis by CO2 Hydrogenation

  • López-Luque, Ivan|||0000-0002-3982-1100
  • Ródenas Torralba, Tania
  • Henao-Sierra, Wilson Albeiro
  • Prieto González, Gonzalo|||0000-0002-0956-3040
  • Hack, Jannis
  • Mundet, Bernat
  • Patil, Prathamesh
  • Pichler, Christian M.
  • Marini, Carlo
  • Agostini, Giovanni
  • Meier, Daniel M.
[EN] The periphery surrounding oxide-supported metal nanoparticles plays a crucial role in many catalytic reactions that exhibit strong metal-oxide promotional effects. Engineering this catalytically active periphery, where kinetically relevant surface intermediates are efficiently turned over, offers a pathway to optimized performance, yet it remains challenging due to the need for precise control over nanospatial catalyst features. Herein, we address this subject for the relevant case of methanol synthesis by CO(2 )hydrogenation on Cu/ZrO2 catalysts. The methanol synthesis rate reaches a maximum at a surface-to-surface Cu interparticle distance of ca. 15 nm. Operando modulation-excitation diffuse reflectance infrared spectroscopy reveals that this optimal spacing maximizes the fraction of surface-bound HCOO* intermediates, stabilized on coordinatively unsaturated Zr(IV) Lewis acid sites on the ZrO(2 )support, which are dynamically involved in catalysis. This particle spacing represents a shift in the reaction's kinetic control regime and the apparent activation energy for methanol synthesis. Engineering Cu interparticle spacing to the optimal value results in exceptionally high metal-specific methanol formation rates under industrially relevant reaction conditions. More broadly, our findings highlight that, beyond metal particle size, interparticle spacing is a key design parameter for catalyst systems featuring functional metal-oxide interfaces., This work has received funding from the Spanish Ministry of Science and Innovation, through grants CEX2021-001230-S and PID2022-140111OB-I00, funded by MCIN/AEI/10.13039/501100011033. Additionally, parts of this study form part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat Valenciana (project MAF/2022/012). Authors acknowledge access to instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya, through grant IU16-014206 (METCAM-FIB) to ICN2. I.L-L acknowledges support by the Ministry of Education of Spain through his predoctoral grant FPU19/02897. W.H. acknowledges support by the Ministry of Science and Innovation of Spain through his predoctoral grant PRE2019-087571. T.R. acknowledges support by the Ramon y Cajal Program (Grant No. RYC2022-037355-I), funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. P. Patil acknowledges funding from Gesellschaft fur Forschungsforderung Niederosterreich (FTI21-D-002). The European Regional Development Fund (EFRE REACT, WST3-F-542638/004-2021) is also acknowledged. In situ XAS experiments were performed at the BL16 NOTOS beamline at ALBA Synchrotron Light Source (Barcelona, Spain) and XAFS beamline at Elettra Synchrotron Light Source (Trieste, Italy), respectively, with the collaboration of the respective beamline staff. Cs/Cc-HAADF-STEM-EDS experiments were performed at EM02-METCAM facility at ALBA Synchrotron Light source (Barcelona, Spain) with the collaboration of ALBA staff. K. Gupta (ICN2 and ALBA) is acknowledged for contributions to microscopy experiments. F. Weisshar (ZHAW) is thanked for support with ME-DRIFTS measurements and N. Maeda for earlier development of ME data analysis algorithms. J. Prieto is acknowledged for his contributions to artwork design.