Pasar al contenido principal

INGENIERIA, PREPARACION Y CARACTERIZACION DE DISPOSITIVOS ELECTRONICOS ORGANICOS PARA APLICACIONES EN SENSORES FISICOS Y (BIO)QUIMICOS Y EL DESARROLLO DE NUEVAS TECNOLOGIAS

PID2019-111682RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 48
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

N-Doped Octagon-Containing HBC as Redox and pH Chiroptical Switch in the NIR

  • Medel, Miguel A.|||0000-0003-2594-1723
  • Hortigüela, Lidia
  • Lloveras, Vega
  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Miguel, Delia
  • Mota, Antonio J.
  • Crivillers, Núria|||0000-0001-6538-2482
  • González Campaña, Araceli|||0000-0001-5483-5642
  • Morcillo, Sara P.
The optical and chiroptical properties of an aza-HBC-oct-[5]helicene have been studied and also modulated by means of protonation or oxidation. In both cases, the generated species shows a new absorption band in the NIR region that is not present in the neutral species. This result enables this N-doped nanographene to act both as optical and, remarkably, as chiroptical switch since both the CD and CPL can be modulated by external stimuli such as redox or pH changes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selection of the two enantiotropic polymorphs of diF-TES-ADT in solution sheared thin film transistors

  • Salzillo, Tommaso
  • Montes, Nieves
  • Pfattner, Raphael
  • Mas Torrent, Marta
We report the effect of solution shearing speed on the performances of diF-TES-ADT-based OFETs. X-ray diffraction reveals that the low-temperature phase is predominant at low shearing speed, while, upon increasing the speed, the high-tempertature phase prevails. The effect of polymorph composition on the electrical performances is reported with the best mobilities found in a mixture of the two polymorphs., This work was funded by the DGI (Spain) project FANCY CTQ2016-80030-R and GENESIS PID2019-111682RB-I00, the Generalitat de Catalunya (2017-SGR-918) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” program for Centers of Excellence in R&D (SEV-2015-0496). T. S. acknowledges the H2020-MSCA-COFUND-2014 Programme (P-SPHERE, Grant agreement 665919). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing Long-Term Device Stability Using Thin Film Blends of Small Molecule Semiconductors and Insulating Polymers to Trap Surface-Induced Polymorphs

  • Salzillo, Tommaso
  • Campos García, Antonio
  • Babuji, Adara
  • Santiago, Raul
  • Bromley, Stefan T.
  • Ocal, Carmen
  • Barrena, Esther
  • Jouclas, Rémy
  • Ruzié, Christian
  • Schweicher, Guillaume
  • Geerts, Yves Henry
  • Mas Torrent, Marta
The lack of long‐term stability in thin films of organic semiconductors can often be caused by the low structural stability of metastable phases that are frequently formed upon deposition on a substrate surface. Here, thin films of 2,7‐dioctyloxy[1]benzothieno[3,2‐b]benzothiophene (C8O‐BTBT‐OC8) and blends of this material with polystyrene by solution shearing are fabricated. Both types of films exhibit the metastable surface‐induced herringbone phase (SIP) in all the tested coating conditions. The blended films reveal a higher device performance with a field‐effect mobility close to 1 cm2 V−1 s−1, a threshold voltage close to 0 V, and an on/off current ratio above 107. In situ lattice phonon Raman microscopy is used to study the stability of the SIP polymorph. It is found that films based on only C8O‐BTBT‐OC8 slowly evolve to the Bulk cofacial phase, significantly impacting device electrical performance. In contrast, the blended films stabilize the SIP phase, leading to devices that maintain a high performance over 1.5 years. This work demonstrates that blending small‐molecule organic semiconductors with insulating binding polymers can trap metastable polymorphs, which can lead to devices with both improved performance and long‐term stability., T.S. and A.C. contributed equally to this work. This work was funded by the Spanish Ministry projects (FANCY CTQ2016‐80030‐R, GENESIS PID2019‐111682RB‐I00, PID2019‐110907GB‐I00, MICIUN/FEDER RTI2018‐095460‐B‐I00 and MAT2016‐77852‐C2‐1‐R (AEI/FEDER, UE)) the Generalitat de Catalunya (2017‐SGR13, 2017‐SGR‐918 and 2017‐SGR668) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496) and “María de Maeztu” program for Spanish Structures of Excellence (MDM‐2017‐0767). The authors also thank the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement No 811284 (UHMob). They also acknowledge access to supercomputer resources as provided through grants from the Red Española de Supercomputación. T.S. acknowledges the H2020‐MSCA‐COFUND‐2014 Programme (P‐SPHERE, Grant agreement 665919). A.B. thanks the Spanish Government financial support through BES‐2016‐077519 FPI fellowship. This work was carried out within the framework of the doctoral program (Ph.D.) of Material Science (Department of Physics and Chemistry) of the Universitat Autonoma de Barcelona (UAB). Y.G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects BTBT no. 2.4565.11, Phasetrans no. T.0058.14, Pi‐Fast no T.0072.18, and 2D to 3D no. 30489208. Financial support from the French Community of Belgian (ARC no. 20061) is also acknowledged. G.S. acknowledges postdoctoral fellowship support from the FNRS. The authors acknowledge Dr. Gemma Rius and CNM‐IMB for the access to the Raman facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of polymer binder on the performance of diF-TES-ADT based organic field effect transistor

  • Salzillo, Tommaso
  • D’Amico, Francesco
  • Montes, Nieves
  • Pfattner, Raphael
  • Mas Torrent, Marta
The presented work concerns the study of solution sheared organic thin film transistors based on a 2,8-difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene (diF-TES-ADT) polymer blend. Four different polymer binders were tested (i.e., polystyrene 10K and 100K g/mol and poly(methyl methacrylate) 25K and 120K g/mol) in order to investigate the influence of the polymer binder nature and its molecular weight on the thin film morphology and device performance. Structural analysis by X-ray and Raman spectroscopy combined with Atomic Force Microscopy (AFM) and polarized optical microscopy were used for a complete characterization of the thin films. Additionally, resonance Raman spectroscopy elucidated the isomeric composition of the thin film devices and the different interactions of the organic semiconductor with the polymer binders., This work was funded by DGI (Spain) project FANCY CTQ2016- 80030-R and GENESIS PID2019-111682RB-I00, the Generalitat de Catalunya (2017-SGR-918), and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S)). T.S. acknowledges the H2020-MSCACOFUND-2014 Programme (P-SPHERE, Grant agreement 665919). The authors acknowledge the Central European Research Infrastructure Consortium (CERIC-ERIC) consortium for the access to experimental facilities at the ElettraSincrotrone Trieste, (Proposal number: 20187028)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Label-free immunodetection of α-synuclein by using a microfluidics coplanar electrolyte-gated organic field-effect transistor

  • Ricci, Simona
  • Casalini, Stefano
  • Parkula, Vitaliy
  • Selvaraj, Meenu
  • Saygin, Gulseren Deniz
  • Greco, Pierpaolo
  • Biscarini, Fabio
  • Mas Torrent, Marta
The aggregation of α-synuclein is a critical event in the pathogenesis of neurological diseases, such as Parkinson or Alzheimer. Here, we present a label-free sensor based on an Electrolyte-Gated Organic Field-Effect Transistor (EGOFET) integrated with microfluidics that allows for the detection of amounts of α-synuclein in the range from 0.25 pM to 25 nM. The lower limit of detection (LOD) measures the potential of our integrated device as a tool for prognostics and diagnostics. In our device, the gate electrode is the effective sensing element as it is functionalised with anti-(α-synuclein) antibodies using a dual strategy: i) an amino-terminated self-assembled monolayer activated by glutaraldehyde, and ii) the His-tagged recombinant protein G. In both approaches, comparable sensitivity values were achieved, featuring very low LOD values at the sub-pM level. The microfluidics engineering is central to achieve a controlled functionalisation of the gate electrode and avoid contamination or physisorption on the organic semiconductor. The demonstrated sensing architecture, being a disposable stand-alone chip, can be operated as a point-of-care test, but also it might represent a promising label-free tool to explore in-vitro protein aggregation that takes place during the progression of neurodegenerative illnesses., This work was funded by the EXPLORA project MAT2015-72760-EXP (Spanish Ministry) and ERC StG 2012–306826 e-GAMES (European Research Council FP7). The authors also thank the Spanish Ministry of Economy and Competitiveness, through the projects FANCY CTQ2016-80030-R, GENESIS PID2019-111682RB-I00 and “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496), the Generalitat de Catalunya (2017-SGR-918) and the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN). S. R. is enrolled in the PhD program of the Universitat Autònoma of Barcelona (UAB). The research leading to these results has also received funding from the People Programme (Marie Curie Actions) of the Seventh Framework Programme of the European Union (FP7/2007–2013) under Research Executive Agency Grant Agreement No. 600388 (TECNIOSpring programme), and from the Agency for Business Competitiveness of the Government of Catalonia, ACCIÓ. The Surface Plasmon Resonance (SPR) measurements were performed through the ICTS NANBIOSIS platform, more specifically in the Biodeposition and Biodetection Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN) at the Catalan Institute of Nanoscience and Nanotechnology (ICN2). The microfluidic device design and fabrication were performed with funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement 764281 (AiPBAND), and Marie Skłodowska-Curie grant agreement 813863 (BORGES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale Mapping of the Conductivity and Interfacial Capacitance of an Electrolyte‐Gated Organic Field‐Effect Transistor under Operation

  • Kyndiah, Adrica
  • Checa, Martí
  • Leonardi, Francesca
  • Millan Solsona, Ruben
  • Muzio, Martina Di
  • Tanwar, Shubham
  • Fumagalli, Laura
  • Mas Torrent, Marta
  • Gomila, Gabriel
Probing nanoscale electrical properties of organic semiconducting materials at the interface with an electrolyte solution under externally applied voltages is key in the field of organic bioelectronics. It is demonstrated that the conductivity and interfacial capacitance of the active channel of an electrolyte‐gated organic field‐effect transistor (EGOFET) under operation can be probed at the nanoscale using scanning dielectric microscopy in force detection mode in liquid environment. Local electrostatic force versus gate voltage transfer characteristics are obtained on the device and correlated with the global current–voltage transfer characteristics of the EGOFET. Nanoscale maps of the conductivity of the semiconducting channel show the dependence of the channel conductivity on the gate voltage and its variation along the channel due to the space charge limited conduction. The maps reveal very small electrical heterogeneities, which correspond to local interfacial capacitance variations due to an ultrathin non‐uniform insulating layer resulting from a phase separation in the organic semiconducting blend. Present results offer insights into the transduction mechanism at the organic semiconductor/electrolyte interfaces at scales down to ≈100 nm, which can bring substantial optimization of organic electronic devices for bioelectronic applications such as electrical recording on excitable cells or label‐free biosensing., This work was partially supported by the BEST Postdoctoral Programme funded by the European Commission under Horizon 2020's Marie Curie Sklodowska‐Curie Actions COFUND scheme (GA 712754) and the Severo Ochoa programme of the Spanish Ministry of Science and Competitiveness (SEV‐2014‐0425), the BORGES project (Marie Curie Skłodowska European Training Network (MSCA‐ITN‐ETN)) under the Grant Agreement (GA 813863), and the Agencia Estatal de Investigacion (Nanoelectrophys project, TEC2016‐79156‐P). Support from an ICREA Academia award (G.G.), the 2017‐SGR1079 grant, and the CERCA program from the Generalitat de Catalunya is also acknowledged. F.L. and M.M.‐T. were funded by the Spanish Ministry (project FANCY CTQ2016‐80030‐R and GENESIS PID2019‐111682RB‐I00), the Generalitat de Catalunya (2017‐SGR‐918), and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496). F.L. acknowledges the Juan de la Cierva fellowship. L.F. received funding from the European Research Council (grant agreement No. 819417) under the European Union's Horizon 2020 research and innovation programme. This work also received funding from the European Commission under Grant Agreement No. H2020‐MSCA‐721874 (SPM2.0). The authors would like to thank Prof. T. Cramer for the measurement software of the EGOFETs and for scientific discussion. The acknowledgements were updated to include a grant from the European Commission on January 27, 2021, after initial online publication., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrocatalytic oxidative Z/E isomerization of a stilbene favoured by the presence of an electroactive persistent radical

  • Mayorga-Burrezo, Paula
  • Sporer, Christian
  • Sousa, J. Alejandro de
  • Capra, Nicola
  • Wurst, Klaus
  • Crivillers, Núria
  • Veciana, Jaume
  • Rovira, Concepció
A push–pull-functionalized stilbene has been prepared, with an electroactive perchlorotriphenylmethyl (PTM) radical and dimethylamine units as electron-withdrawing and -donating moieties, respectively, showing an electrocatalytic redox-induced Z - E isomerization where the open-shell nature of PTM plays a key role in the isomerization ocurrance., This work was supported by the MICIU of Spain (CTQ2016-80030-R and PID2019-111682RB-I00), the Generalitat de Catalunya (2017-SGR-918) and the MINECO (SEV-2015-0496). J. A. de S. is enrolled in the Materials Science PhD program of UAB. J. A. de S. thanks the Spanish Ministry for the FPI fellowship. The authors acknowledge Dr J. Vidal-Galcedo and Dr Vega Lloveras for the ESR measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reversal of the Direction of Rectification Induced by Fermi Level Pinning at Molecule–Electrode Interfaces in Redox-Active Tunneling Junctions

  • Han, Yingmei
  • Maglione, Maria Serena
  • Díez Cabanes, Valentín
  • Casado Montenegro, Javier
  • Yu, Xiaojiang
  • Karuppannan, Senthil Kumar
  • Zhang, Ziyu
  • Crivillers, Núria
  • Mas Torrent, Marta
  • Rovira, Concepció
  • Cornil, Jérôme
  • Veciana, Jaume
  • Nijhuis, Christian A.
Control over the energy level alignment in molecular junctions is notoriously difficult, making it challenging to control basic electronic functions such as the direction of rectification. Therefore, alternative approaches to control electronic functions in molecular junctions are needed. This paper describes switching of the direction of rectification by changing the bottom electrode material M = Ag, Au, or Pt in M–S(CH2)11S–BTTF//EGaIn junctions based on self-assembled monolayers incorporating benzotetrathiafulvalene (BTTF) with EGaIn (eutectic alloy of Ga and In) as the top electrode. The stability of the junctions is determined by the choice of the bottom electrode, which, in turn, determines the maximum applied bias window, and the mechanism of rectification is dominated by the energy levels centered on the BTTF units. The energy level alignments of the three junctions are similar because of Fermi level pinning induced by charge transfer at the metal–thiolate interface and by a varying degree of additional charge transfer between BTTF and the metal. Density functional theory calculations show that the amount of electron transfer from M to the lowest unoccupied molecular orbital (LUMO) of BTTF follows the order Ag > Au > Pt. Junctions with Ag electrodes are the least stable and can only withstand an applied bias of ±1.0 V. As a result, no molecular orbitals can fall in the applied bias window, and the junctions do not rectify. The junction stability increases for M = Au, and the highest occupied molecular orbital (HOMO) dominates charge transport at a positive bias resulting in a positive rectification ratio of 83 at ±1.5 V. The junctions are very stable for M = Pt, but now the LUMO dominates charge transport at a negative bias resulting in a negative rectification ratio of 912 at ±2.5 V. Thus, the limitations of Fermi level pinning can be bypassed by a judicious choice of the bottom electrode material, making it possible to access selectively HOMO- or LUMO-based charge transport and, as shown here, associated reversal of rectification., The authors express thanks to the Ministry of Education (MOE) for supporting this research under award nos. MOE2018-T2-1-088 and R-143-000-B30-112. We also acknowledge the Prime Minister’s Office, Singapore, under its Medium Sized Centre program for supporting this research. This work was also funded by ITN iSwitch 642196, the DGI (Spain), projects FANCY (CTQ2016-80030-RA), GENESIS (PID2019-111682RB-I00) and MOTHER (MAT2016-80826- R), the Generalitat de Catalunya (2017-SGR-918), the Instituto de Salud Carlos III, through “Acciones CIBER”, and the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” program for Centers of Excellence in R&D (FUNFUTURE; CEX2019-000917-S). The work in Mons was financially supported by the EC through the Marie Curie project ITN iSwitch (GA no. 642196). Computational resources were provided by the Consortium des É quipements de Calcul Intensif (CÉ CI) funded by the Belgian National Fund for Scientific Research (F.R.S.-FNRS) under grant 2.5020.11. J.C. is an FNRS research director., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular Disorder in Crystalline Thin Films of an Asymmetric BTBT Derivative

  • Höfer, Sebastian
  • Unterkofler, Johanna
  • Kaltenegger, Martin
  • Schweicher, Guillaume
  • Ruzié, Christian
  • Tamayo, Adrián
  • Salzillo, Tommaso
  • Mas Torrent, Marta
  • Sanzone, Alessandro
  • Beverina, Luca
  • Geerts, Yves Henry
  • Resel, Roland
The molecule 2-decyl-7-phenyl-[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10) is an organic semiconductor with outstanding performance in thin-film transistors. The asymmetric shape of the molecule causes an unusual phase behavior, which is a result of a distinct difference in the molecular arrangement between the head-to-head stacking of the molecules versus head-to-tail stacking. Thin films are prepared at elevated temperatures by crystallization from melt under controlled cooling rates, thermal-gradient crystallization, and bar coating at elevated temperatures. The films are investigated using X-ray diffraction techniques. Unusual peak-broadening effects are found, which cannot be explained using standard models. The modeling of the diffraction patterns with a statistic variation of the molecules reveal that a specific type of molecular disorder is responsible for the observed peak-broadening phenomena: the known head-to-head stacking within the crystalline phase is disturbed by the statistic integration of reversed (or flipped) molecules. It is found that 7–15% of the molecules are integrated in a reversed way, and these fractions are correlated with cooling rates during the sample preparation procedure. Temperature-dependent in situ experiments reveal that the defects can be healed by approaching the transition from the crystalline state to the smectic E state at a temperature of 145 °C. This work identifies and quantifies a specific crystalline defect type within thin films of an asymmetric rodlike conjugated molecule, which is caused by the crystallization kinetics., This work was supported by the Fonds de la Recherche Scientifique (FNRS) and the Fonds voor Wetenschappelijk Onderzoek – Vlanderen (FWO) under EOS project 30489208 and the Austrian Science Fund (FWF): [P30222]. YG is also thankful to FNRS for financial support through research projects BTBT n° 2.4565.11, Phasetrans n° T.0058.14, Pi-Fast n° T.0072.18, and 2D to 3D No. 30489208. Financial supports from the French Community of Belgian (ARC n° 20061) and by the Walloon Region (WCS No. 1117306, SOLIDYE n° 1510602) are also acknowledged. G.S. acknowledges postdoctoral fellowship support from the FNRS. M.M. thanks the Spanish Ministry project GENESIS PID2019-111682RB-I00, the “Severo Ochoa” Programme for the Centers of Excellence in R&D (FUNFUTURE, CEX2019-000917-S), and the Generalitat de Catalunya (2017-SGR-918). A.T. is enrolled in the Materials Science PhD program of Universitat Autònoma de Barcelona and acknowledges FPU fellowship from the Spanish Ministry. The large-scale facility Elettra, Trieste, Italy, provided synchrotron radiation for grazing incidence X-ray diffraction experiments at the beamline XRD1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interaction of Luminescent Defects in Carbon Nanotubes with Covalently Attached Stable Organic Radicals

  • Berger, Felix J.
  • Sousa, J. Alejandro de
  • Zhao, Shen
  • Zorn, Nicolas F.
  • El Yumin, Abdurrahman Ali
  • Quintana García, Aleix
  • Settele, Simon
  • Högele, Alexander
  • Crivillers, Núria
  • Zaumseil, Jana
The functionalization of single-walled carbon nanotubes (SWCNTs) with luminescent sp3 defects has greatly improved their performance in applications such as quantum light sources and bioimaging. Here, we report the covalent functionalization of purified semiconducting SWCNTs with stable organic radicals (perchlorotriphenylmethyl, PTM) carrying a net spin. This model system allows us to use the near-infrared photoluminescence arising from the defect-localized exciton as a highly sensitive probe for the short-range interaction between the PTM radical and the SWCNT. Our results point toward an increased triplet exciton population due to radical-enhanced intersystem crossing, which could provide access to the elusive triplet manifold in SWCNTs. Furthermore, this simple synthetic route to spin-labeled defects could enable magnetic resonance studies complementary to in vivo fluorescence imaging with functionalized SWCNTs and facilitate the scalable fabrication of spintronic devices with magnetically switchable charge transport., The authors thank Dr. Vega Lloveras for performing electron paramagnetic resonance measurements. This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 817494 “TRIFECTs”). S.Z. acknowledges funding from the Alexander von Humboldt Foundation, and A.H. from the European Research Council (ERC) under the grant agreement no. 772195 and the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy EXC-2111-390814868. This work was also supported by the MICIU of Spain (PID2019-111682RB-I00), the Generalitat de Catalunya (2017-SGR-918), and the Severo Ochoa FUNFUTURE (CEX2019-000917-S). J.A.d.S. is enrolled in the Materials Science Ph.D. program of UAB. J.A.d.S. thanks the FPI fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Allocation of Ambipolar Charges on an Organic Diradical with a Vinylene–Phenylenediyne Bridge

  • Mayorga-Burrezo, Paula
  • Bejarano, Francesc
  • Calbo, Joaquín
  • Zhao, Xiaotao
  • Sousa, J. Alejandro de
  • Lloveras, Vega
  • Bryce, Martin R.
  • Ortí, Enrique
  • Veciana, Jaume
  • Rovira, Concepció
  • Crivillers, Núria
Two redox and magnetically active perchlorotriphenylmethyl (• PTM) radical units have been connected as end-capping groups to a bis(phenylene)diyne chain through vinylene linkers. Negative and positive charged species have been generated, and the influence of the bridge on their stabilization is discussed. Partial reduction of the electron-withdrawing • PTM radicals results in a class-II mixed-valence system with the negative charge located on the terminal PTM units, proving the efficiency of the conjugated chain for the electron transport between the two terminal sites. Counterintuitively, the oxidation process does not occur along the electron-rich bridge but on the vinylene units. The • PTM radicals play a key role in the stabilization of the cationic species, promoting the generation of quinoidal ring segments., This work was supported by the MICINN of Spain (Projects CTQ2016-80030-R, PGC2018-099568-B-I00 (EU Feder Funds), PID2019-111682RB-I00, Severo Ochoa FUNFUTURE CEX2019-000917-S, and María de Maeztu CEX2019- 000919-M), the Generalitat de Catalunya (2017-SGR-918), the Generalitat Valenciana (PROMETEO/2020/077), and the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN) Development Fund. P.M.- B. gratefully thanks financial support from the Juan de la Cierva-Formación 2015 programme (FJCI-2015-23577) supported by MICINN. F.B. thanks the MECD for a predoctoral FPU fellowship. J.C. acknowledges the Generalitat Valenciana (APOSTD/2017/081). J.A.d.S. is enrolled in the Materials Science doctoral program of the UAB. J.A.d.S. thanks the MINECO for the FPI-SO fellowship. The authors acknowledge A. Bernabé from ICMAB for the MALDI-ToF measurements and Dr. Mireia Díaz and Dr. Marta Vilaseca, from the IRB Barcelona Mass Spectrometry and Proteomics Core Facility (unity member of ProteoRed, PRB3-ISCIII, supported by Grant PRB3 (IPT17/0019-ISCIII-SGEFI/ERDF), for the ES+ ToF MS experiments. The work in Durham was supported by the EC FP7 ITN project MOLESCO (606728)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mobility anisotropy in the herringbone structure of asymmetric Ph-BTBT-10 in solution sheared thin film transistors

  • Tamayo, Adrián
  • Höfer, Sebastian
  • Salzillo, Tommaso
  • Ruzié, Christian
  • Schweicher, Guillaume
  • Resel, Roland
  • Mas Torrent, Marta
Thin films of the organic semiconductor Ph-BTBT-10 and blends of this material with polystyrene have been deposited by a solution shearing technique at low (1 mm s−1) and high (10 mm s−1) coating velocities and implemented in organic field-effect transistors. Combined X-ray diffraction and electrical characterisation studies prove that the films coated at low speed are significantly anisotropic. The highest mobility is found along the coating direction, which corresponds to the crystallographic a-axis. In contrast, at high coating speed the films are crystallographically less ordered but with better thin film homogeneity and exhibit isotropic electrical characteristics. Best mobilities are found in films prepared at high coating speeds with the blended semiconductor. This work demonstrates the interplay between the crystal packing and thin film morphology and uniformity and their impact on the device performance., The authors also thank the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob), the Spanish Ministry project GENESIS PID2019-111682RB-I00, the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE, CEX2019-000917-S), the Generalitat de Catalunya (2017-SGR-918) and the Austrian Science Fund (FWF): [P30222]. A. T. thanks his enrolment in the Materials Science PhD program of Universitat Autònoma de Barcelona and acknowledges FPU fellowship from the Spanish Ministry. We thank the synchrotron Elettra, Trieste for provision of synchrotron radiation and Luisa Barba for her support to use the beamline XRD1. G.S. acknowledges postdoctoral fellowship support from the Belgian National Fund for Scientific Research (FNRS). We acknowledge support of the publication fee from the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bias-Polarity-Dependent Direct and Inverted Marcus Charge Transport Affecting Rectification in a Redox-Active Molecular Junction

  • Han, Yingmei
  • Nickle, Cameron
  • Maglione, Maria Serena
  • Karuppannan, Senthil Kumar
  • Casado Montenegro, Javier
  • Qi, Dong-Chen
  • Chen, Xiaoping
  • Tadich, Anton
  • Cowie, Bruce
  • Mas Torrent, Marta
  • Rovira, Concepció
  • Cornil, Jérôme
  • Veciana, Jaume
  • Barco, Enrique del
  • Nijhuis, Christian A.
This paper describes the transition from the normal to inverted Marcus region in solid-state tunnel junctions consisting of self-assembled monolayers of benzotetrathiafulvalene (BTTF), and how this transition determines the performance of a molecular diode. Temperature-dependent normalized differential conductance analyses indicate the participation of the HOMO (highest occupied molecular orbital) at large negative bias, which follows typical thermally activated hopping behavior associated with the normal Marcus regime. In contrast, hopping involving the HOMO dominates the mechanism of charge transport at positive bias, yet it is nearly activationless indicating the junction operates in the inverted Marcus region. Thus, within the same junction it is possible to switch between Marcus and inverted Marcus regimes by changing the bias polarity. Consequently, the current only decreases with decreasing temperature at negative bias when hopping is “frozen out,” but not at positive bias resulting in a 30-fold increase in the molecular rectification efficiency. These results indicate that the charge transport in the inverted Marcus region is readily accessible in junctions with redox molecules in the weak coupling regime and control over different hopping regimes can be used to improve junction performance., Y.H., C.N., M.S.M., and S.K.K. contributed equally to this work. The authors acknowledge the Ministry of Education (MOE) for supporting this research under award no. MOE2019-T2-1-137. Prime Minister's Office, Singapore under its Medium sized centre program is also acknowledged for supporting this research. The authors also gratefully acknowledge the Australian Synchrotron (ANSTO) soft X-ray spectroscopy beamline where the SAM characterization was conducted. C.N. and E.d.B. acknowledge support from the US National Science Foundation (grant no. ECCS#1916874). D.Q. acknowledges the support of the Australian Research Council (Grant No. FT160100207). Authors also acknowledge the Marie-Sklodowska-Curie project ITN iSwitch (GA-642196), Spanish Ministry of Economy and Competitiveness (project FANCY CTQ2016-80030-R, GENESIS PID2019-111682RB-I00 and Severo Ochoa programme for Centers of excellence in R&D (SEV-2015-0496)). J.C. is a research director of the Belgian National Fund for Scientific Research (FNRS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Precursor polymorph determines the organic semiconductor structure formed upon annealing

  • Pandolfi, Lorenzo
  • Giunchi, Andrea
  • Rivalta, Arianna
  • D'Agostino, Simone
  • Della Valle, Raffaele Guido
  • Mas Torrent, Marta
  • Lanzi, Massimilano
  • Venuti, Elisabetta
  • Salzillo, Tommaso
Films of the chemical precursor (t)Boc-quinacridone obtained by the spin-coating and bar-assisted meniscus shearing methods were subjected to thermal deprotection to recover the organic semiconductor quinacridone in its crystalline form. We found that the final crystal structure of the semiconductor on the Si/SiO2 substrate is in fact determined by the chemical precursor starting structure, which is in turn induced by the deposition method. Indeed, the samples prepared by spin coating display the precursor structure known from the literature, which transforms into the beta-quinacridone phase. The shearing technique instead yields highly homogeneous films composed of a novel (t)Boc-quinacridone polymorph, which acts as a trigger for the subsequent formation of a pure, well oriented alpha-quinacridone phase. Although this crystalline form is the least stable of the many quinacridone polymorphs, here it turns out to be selectively induced and stabilized. Finally, the organic field effect transistor charge mobility of the alpha-quinacridone films was measured., T. S. acknowledges the H2020-MSCA-COFUND-2014 Programme (P-SPHERE, Grant agreement 665919). This work was supported by the MIUR-PRIN project “From natural to artificial light-harvesting systems: unveiling fundamental processes towards a bio-inspired materials design” (HARVEST) protocol 201795SBA3. This work was funded by DGI (Spain) with the project GENESIS PID2019-111682RB-I00, the Generalitat de Catalunya (2017-SGR-918), and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S). The authors thank Dr Raphael Pfattner (ICMAB-CSIC) for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interplay between Electrolyte-Gated Organic Field-Effect Transistors and Surfactants: A Surface Aggregation Tool and Protecting Semiconducting Layer

  • Zhang, Qiaoming
  • Tamayo, Adrián
  • Leonardi, Francesca
  • Mas Torrent, Marta
Molecular surfactants, which are based on a water-insoluble tail and a water-soluble head, are widely employed in many areas, such as surface coatings or for drug delivery, thanks to their capability to form micelles in solution or supramolecular structures at the solid/liquid interface. Electrolyte-gated organic field-effect transistors (EGOFETs) are highly sensitive to changes occurring at their electrolyte/gate electrode and electrolyte/organic semiconductor interfaces, and hence, they have been much explored in biosensing due to their inherent amplification properties. Here, we demonstrate that the EGOFETs and surfactants can provide mutual benefits to each other. EGOFETs can be a simple and complementary tool to study the aggregation behavior of cationic and anionic surfactants at low concentrations on a polarized metal surface. In this way, we have monitored the monolayer formation of cationic and anionic surfactants at the water/electrode interface with p-type and n-type devices, respectively. On the other hand, the operational stability of EGOFETs has been dramatically enhanced, thanks to the formation of a protective layer on top of the organic semiconductor by exposing it to a high concentration of a surfactant solution (above the critical micelle concentration). Stable performances were achieved for more than 10 and 2 h of continuous operation for p-type and n-type devices, respectively. Accordingly, this work points not only that EGOFETs can be applied to a wider range of applications beyond biosensing but also that these devices can effectively improve their long-term stability by simply treating them with a suitable surfactant., This work was funded by DGI (Spain) through project GENESIS PID2019-111682RB-I00, the Generalitat de Catalunya (2017-SGR-918), and the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019- 000917-S). A.T. acknowledges the FPU fellowship and is enrolled in the UAB Materials Science PhD program. F.L. gratefully acknowledges the “Juan de la Cierva” programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perspectives for polychlorinated trityl radicals

  • Ratera, Immaculada
  • Vidal Gancedo, José
  • Maspoch, Daniel
  • Bromley, Stefan T.
  • Crivillers, Núria
  • Mas Torrent, Marta
An organic free radical is a molecule with one or more unpaired electrons. Although most free radicals are highly reactive, chemists have developed a few families of so-called persistent organic radicals with high kinetic stabilities. Polychlorinated trityl radicals, also known as polychlorotriphenylmethyl (PTM) radicals, are particularly chemically stable due to the high steric hindrance provided by the chlorine atoms in ortho positions which protect their single unpaired electron localised on the central carbon atom. In addition to their inherent magnetic spin due to the unpaired electron, PTMs exhibit other appealing properties such as a rich electrochemistry and characteristic optical properties (absorption and emission). Moreover, it has been shown that these properties can be tuned through the preparation of a large library of PTM-based derivatives. Here, we review recent developments employing PTM radicals, which include their implementation in molecular electronic junctions/switches, as building blocks for the preparation of magnetic networks and opto-electronic devices/materials and their exploitation in bio-applications., The authors thank Prof. Jaume Veciana and Prof. Concepció Rovira for their continuous support along all these years. This work was funded by the Spanish Ministry of Science and Innovation with the projects GENESIS PID2019-111682RB-I00, Mol4Bio PID2019-105622RB-I00, RTI2018-095622-B-I00 and RTI2018-095460-B-100, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Grant No. SEV-2017-0706) and the Spanish Structures of Excellence María de Maeztu program (MDM-2017-0767). The authors also thank the Generalitat de Catalunya (2017-SGR-918, 2017SGR13 and 2017SGR238). It was also funded by the CERCA Program/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tetramethylbenzidine−TetrafluoroTCNQ (TMB−TCNQF4): A NarrowGap Semiconducting Salt with Room-Temperature Relaxor Ferroelectric Behavior, (TMB-TCNQF4): A Narrow-Gap Semiconducting Salt with Room Temperature Relaxor Ferroelectric Behavior

  • Canossa, Stefano
  • Ferrari, Elena
  • Sippel, Pit
  • Fischer, Jonas K. H.
  • Pfattner, Raphael
  • Frison, Ruggero
  • Masino, Matteo
  • Mas Torrent, Marta
  • Lunkenheimer, Peter
  • Rovira, Concepció
  • Girlando, Alberto
We present an extension and revision of the spectroscopic and structural data of the mixed-stack charge-transfer (CT) crystal 3,3′,5,5′-tetramethylbenzidine–tetrafluorotetracyanoquinodimethane (TMB–TCNQF4), associated with new electric and dielectric measurements. Refinement of synchrotron structural data at low temperature has led to revise the previously reported C2/m structure. The revised structure is P21/m, with two dimerized stacks per unit cell, and is consistent with the low-temperature vibrational data. However, polarized Raman data in the low-frequency region also indicate that by increasing temperature above 200 K, the structure presents an increasing degree of disorder, mainly along the stack axis. X-ray diffraction data at room temperature have confirmed that the correct structure is P21/m─no phase transitions─but did not allow substantiating the presence of disorder. On the other hand, dielectric measurements have evidenced a typical relaxor ferroelectric behavior already at room temperature, with a peak in the real part of dielectric constant ϵ′(T,ν) around 200 K and 0.1 Hz. The relaxor behavior is explained in terms of the presence of spin solitons separating domains of opposite polarity that yield to ferroelectric nanodomains. TMB–TCNQF4 is confirmed to be a narrow-gap band semiconductor (Ea ∼ 0.3 eV) with a room-temperature conductivity of ∼10–4 Ω–1 cm–1., A.G. thanks Prof. Pascale Foury-Leylekian for very helpful discussions about the crystallographic issues. R.F. thanks Prof. Anthony Linden for his help in the X-ray diffraction data collection. J.K.H.F. and P.L. acknowledge funding from the Deutsche Forschungsgemeinschaft (DFG) via the Transregional Collaborative Research Center TRR80 (Augsburg, Munich). R.P. and M.M.-T. acknowledge support from the Marie Curie Cofund, Beatriu de Pinós Fellowships (Grant nos. AGAUR 2017 BP 00064). This work was also supported by the Spanish Ministry project GENESIS PID2019-111682RB-I00, the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE, CEX2019-000917-S), and the Generalitat de Catalunya (2017-SGR-918). The Elettra Synchrotron (CNR Trieste) is acknowledged for granting the beamtime at the single-crystal diffraction beamline XRD1 (Proposal ID 20185483). In Parma, the work has benefited from the equipment and support of the COMP-HUB Initiative, funded by the “Departments of Excellence” program of the Italian Ministry for Education, University and Research (MIUR, 2018-2022)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low activation energy field-effect transistors fabricated by bar-assisted meniscus shearing

  • Berteau-Rainville, Michael
  • Tamayo, Adrián
  • Leydecker, Tim
  • Pezeshki, Atiye
  • Salzmann, Ingo
  • Mas Torrent, Marta
  • Orgiu, Emanuele
Here, we study the temperature-dependent transport properties of OFETs with the prototypical OSC 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) co-processed with polystyrene (PS) as the active layer. The active layer is deposited directly on SiO2 using the bar-assisted meniscus shearing (BAMS) method. The co-processing with PS favors a consequential decrease in interfacial trap densities as previously reported. Furthermore, we demonstrate how this processing method leads to devices exhibiting activation energies well below the current state of the art for TIPS-pentacene on SiO2 or other dielectrics. Altogether, our study reports on TIPS-pentacene thin films exhibiting an activation energy (Ea) as low as 15 meV when the active material is blended with PS and processed via BAMS. Such an unprecedentedly low value originates not only from a decrease in the interfacial trap densities but also from trapping energies much shallower than previously reported elsewhere for the same material. This allows us to clarify the previously reported notion that significant passivation of interfacial traps occurs following the separation of PS from TIPS-pentacene into an individual layer at the interface with the insulator and to confirm that the enhanced transport originates from a synergistic effect wherein both trapping density and depth are reduced., E.O. and I.S. acknowledge the financial support of the Natural Sciences and Engineering Research Council of Canada (NSERC) (funding Reference Nos. RGPIN-201805092 and RGPIN-2017-06748), the Fonds de recherche du Québec-Nature et technologies (FRQNT). E.O. also acknowledges the financial support of the Canadian Foundation for Innovation (CFI) through the John R. Evans Leaders Fund (JELF). M.M.T. acknowledges funding by the Spanish Ministry with the Project No. GENESIS PID2019-111682RB-I00 and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (No. FUNFUTURE CEX2019-000917-S) and the Generalitat de Catalunya (No. 2017-SGR-918). A.T. acknowledges his FPU fellowship and is enrolled in the UAB Materials Science Ph.D. program. M.B.R. cordially thanks NSERC for support through the Canada Graduate Scholarships–Master's program and the Centre québécois sur les matériaux fonctionnels (CQMF) for his summer scholarship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic Field-Effect Transistors Based on Ternary Blends Including a Fluorinated Polymer for Achieving Enhanced Device Stability

  • Tamayo, Adrián
  • Salzillo, Tommaso
  • Mas Torrent, Marta
The stability of organic semiconductors (OSCs) is strongly hampered by the presence of water molecules. One approach that has been proved to lead to organic field-effect transistors with an enhanced performance is the use of blends of OSCs with insulating binding polymers. In this work, the fabrication of OSC thin films based on polymeric ternary blends including a hydrophobic fluorinated polymer is reported as a novel route to engineer long-term reliable organic field-effect transistors (OFET) devices. In particular, OFETs based on blends of bis(triisopropylsilylethynyl)pentacene (TIPS) with polystyrene (PS) and poly(pentafluorostyrene) (PFS) are explored. The PS:PFS ratio is tuned in order to find the optimum formulation. It is shown that films including 20% of PFS in the polymeric blend exhibit an improved device performance, which is reflected by a low bias stress and an exceptional environmental stability, without significantly hampering the OFET mobility. This work advocates that adding a small percentage of fluorinated polymers in OSC blends is a promising route to realize more reliable and stable devices without importantly compromising the device mobility., This work was funded by the Spanish Ministry with the project GENESIS PID2019-111682RB-I00 and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S) and the Generalitat de Catalunya (2017-SGR-918). A.T. acknowledges his FPU fellowship and is enrolled in the UAB Materials Science PhD program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical Doping of the Organic Semiconductor C8-BTBT-C8 Using an Aqueous Iodine Solution for Device Mobility Enhancement

  • Li, Jinghai
  • Babuji, Adara
  • Temiño, Inés
  • Salzillo, Tommaso
  • D'Amico, Francesco
  • Pfattner, Raphael
  • Ocal, Carmen
  • Barrena, Esther
  • Mas Torrent, Marta
The performance of organic field-effect transistors is still severely limited by factors such as contact resistance and charge trapping. Chemical doping is considered to be a promising key enabler for improving device performance, although there is a limited number of established doping protocols as well as a lack of understanding of the doping mechanisms. Here, a very simple doping methodology based on exposing an organic semiconductor thin film to an aqueous iodine solution is reported. The doped devices exhibit enhanced device mobility, which becomes channel-length independent, a decreased threshold voltage and a reduction in the density of interfacial traps. The device OFF current is not altered, which is in agreement with the spectroscopic data that points out that no charge transfer processes are occurring. Kelvin probe force microscopy characterization of the devices under operando conditions unambiguously proves that an important reduction of the contact resistance takes place after their exposition to the iodine solution, reaching almost ohmic contact., This work was funded by the Spanish Ministry with the project GENESIS PID2019-111682RB-I00, PID2019-110907GB-I00, MAT2017-85089-C2-1-R (AEI/FEDER, UE) and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S) and the Generalitat de Catalunya (2017-SGR-918). T. S. and F. D. acknowledge CERIC-ERIC for providing access to the Elettra IUVS-OFF beamline (beamtime number 20187028). J. L. acknowledges the Scholarship from the Chinese Council and J. L. and A. B. are enrolled in the UAB Materials Science PhD program. A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalising the gate dielectric of organic field-effect transistors with self-assembled monolayers: effect of molecular electronic structure on device performance

  • Riera Galindo, Sergi
  • Chen, Lijia
  • Maglione, Maria Serena
  • Zhang, Qiaoming
  • Bromley, Stefan T.
  • Rovira, Concepció
  • Mas Torrent, Marta
The performance of organic field-effect transistors (OFETs) is determined by the semiconductor/dielectric interface. In this work, we report the functionalization of an OFET dielectric with a novel electroactive self-assembled monolayer (SAM) based on a polychlorotriphenylmethyl (PTM) radical derivative and its αH non electroactive counterpart. The influence of these SAMs on p- and n-type OFETs is explored. We observe that differences in the accessibility of the electronic energy levels of the PTM derivatives has a significant impact on the device performance. Both SAMs are hydrophobic, which lead to smoother pentacene films. In addition, the radical electroactive SAMs act as p-dopant in pentacene transistors and as charge trap in fullerene C60 OFETs. This approach can be useful for fabricating organic electronic devices with tailored properties., The authors also thank the Generalitat de Catalunya (2017-SGR-918 and 2017-SGR-13), and the Spanish Ministry through the projects RTI2018-095460-B-I00 and GENESIS PID2019-111682RB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S) and a María de Maeztu grant (MDM-2017–0767). S.R-G. acknowledges support from the Marie Skłodowska Curie Cofund, Beatriu de Pinós Fellowship (AGAUR-2019 BP 00200), and L-C. and Q.Z. acknowledge the Chinese Research Council., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoswitching activation of a ferrocenyl-stilbene analogue by its covalent grafting to gold

  • Bejarano, Francesc
  • Gutiérrez Yatacue, Diego F.
  • Catalán Toledo, José I.
  • Roca Sanjuán, Daniel
  • Gierschner, Johannes
  • Veciana, Jaume
  • Mas Torrent, Marta
  • Rovira, Concepció
  • Crivillers, Núria
Until now, surface-deposited stilbenes have been much less studied than other photochromic systems. Here, an asymmetrically substituted styrene incorporating a redox-active ferrocene moiety and a terminal alkyne group has been synthesised to investigate its photoisomerization in solution, and upon the formation of chemisorbed self-assembled monolayers through a carbon-gold bond formation. Charge transport measurements across the monolayers reveal that upon chemical linkage to the gold substrate there is an alteration of the isomerization pathway, which favours the trans to cis conversion, which is not observed in solution. The experimental observations are interpreted based on quantum chemistry calculations., This work was funded by the Spanish Ministry project GENESIS PID2019-111682RB-I00, the Generalitat de Catalunya (2017-SGR-918) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and CIBER-BBN. The work in Valencia and Madrid is supported by the MINECO-FEDER project CTQ2017-87054. The work in Madrid is further supported by the Spanish Science Ministry through the SEV-2016-0686 and CEX2020-001039-S grants and by the Campus of International Excellence (CEI) UAM + CSIC. D. R.-S. acknowledges the MINECO Ramón y Cajal grant (RYC-2015-19234) and the MDM-2015-0538 María de Maeztu Programme. J. C.-T. thanks (DOC-FAM fellowship, grant agreement Nr.754397 through H2020-MSCA-COFUND-2016). F. B. and J. C -T. are enrolled in the Materials Science PhD program of UAB. F. B. thanks the Spanish Ministry for the FPU fellowship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Charge transfer complexes of a benzothienobenzothiophene derivative and their implementation as active layer in solution-processed thin film organic field-effect transistors

  • Fijahi, Lamiaa
  • Salzillo, Tommaso
  • Tamayo, Adrián
  • Bardini, Marco
  • Ruzie, Christian
  • Quarti, Claudio
  • Beljonne, David
  • D'Agostino, Simone
  • Geerts, Yves Henry
  • Mas Torrent, Marta
Herein, we report on the synthesis and structural characterization of novel charge transfer (CT) complexes of the benzothienobenzothiophene derivative C8O-BTBT-OC8 with the series of FxTCNQ derivatives (x = 2, 4). The degree of charge transfer and HOMO–LUMO gap energies were evaluated by spectroscopic means and by DFT calculations. Thin films of the (C8O-BTBT-OC8)(F4TCNQ) complex were prepared by a simple solution shearing technique and by blending the active materials with polystyrene. X-Ray diffraction and IR/Raman spectroscopy techniques were instrumental for the structural identification of the films, which belonged to the same phase as the resolved single crystal. The films were implemented as an active layer in organic field-effect transistor (OFET) devices, which exhibited an n-type behavior in ambient conditions in agreement with the theoretical calculations., This work was funded by European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 811284 (UHMob), the Spanish Ministry with the project GENESIS PID2019-111682RB-I00 and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), the Generalitat de Catalunya (2017-SGR-918) and the Consortium des Equipements de Calcul Intensif (CECI), funded by the Fonds de la Recherche Scientifique de Belgique (F.R.S. – FNRS) under grant no. 2.5020.11. A. T. acknowledges his FPU fellowship. A. T and L. F. are enrolled in the UAB Materials Science PhD program. Y. G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects, Pi-Fast No. T.0072.18, and 2D to 3D No. 30489208. Financial supports from the French Community of Belgium (ARC No. 20061) is also acknowledged. DB is a FNRS research director, CQ is a FNRS research associate. S. D. acknowledges financial support from the University of Bologna (RFO-Scheme). TS thanks the European co-financing project FSE REACT EU – PON R&I 2014–2020., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time threshold voltage compensation on dual-gate electrolyte-gated organic field-effect transistors

  • Lago, Nicolò
  • Buonomo, Marco
  • Ruiz Molina, Sara
  • Pollesel, Andrea
  • Hensel, Rafael Cintra
  • Sedona, Francesco
  • Sambi, Mauro
  • Mas Torrent, Marta
  • Casalini, Stefano
  • Cester, Andrea
Electrolyte-Gated Organic Field-Effect Transistors (EGOFETs) offer many opportunities for the development of low-cost and low-power electronics suitable for applications like sensors and point-of-care tests; however, EGOFETs can be affected by the drift of their operative point that causes signals distortion and loss of information during sensing applications. Here, a blend of 2,8-Difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene (diF-TES-ADT) and polystyrene (PS) is used as the active material for the fabrication of dual-gate EGOFETs. We exploited the dual-gate architecture to improve EGOFETs stability by implementing digital feedback that uses the back-gate electrode to compensate dynamically for the transistor threshold voltage allowing us to fix its operative point for prolonged tests (>10 h) with different aqueous solutions (Milli-Q water, NaCl 0.1 M and a physiological solution). The presented real-time threshold voltage compensation does not only allow to steady EGOFETs DC output current, but it also preserves EGOFETs sensing capability for the detection of signals with frequencies as low as 1 Hz., The research leading to these results has received funding from the University of Padua, Department of Chemical Sciences (Grants: P-DISC#09BIRD2019-UNIPD - SMOW -; P-DiSC#11NExuS_BIRD2020-UNIPD - CARBON-FET -). It is further funded by the Italian Ministry of Education, Universities and Research through the project entitled “Nanochemistry for Energy and Health, NExuS” (the national funding network termed “Dipartimenti di Eccellenza” awarded to the Department of Chemical Sciences at the University of Padua). This work was partially supported by the University of Padua, Department of Information Engineering, under the initiative Project PROACTIVE 2018, and by MIUR (Italian Minister for Education) under the initiative “Departments of Excellence” (Law 232/2016). This work was funded by the Spanish Ministry of Science and Innovation with the project GENESIS PID2019-111682RB-I00 and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), and the Generalitat de Catalunya (2017-SGR-918). S. R. acknowledges her FPI fellowship and is enrolled in the UAB PhD program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical Quatsome-RGD Nanoarchitectonic Surfaces for Enhanced Integrin-Mediated Cell Adhesion

  • Martínez Miguel, Marc
  • Castellote Borrell, Miquel
  • Köber, Mariana
  • Kyvik Ruiz, Adriana
  • Tomsen Melero, Judit
  • Vargas Nadal, Guillem
  • Muñoz Martín, José M.
  • Pulido, Daniel
  • Cristóbal Lecina, Edgar
  • Passemard, Solène
  • Royo, Miriam
  • Mas Torrent, Marta
  • Veciana, Jaume
  • Giannotti, Marina I.
  • Guasch, Judit
  • Ventosa, Nora
  • Ratera, Immaculada
The synthesis and study of the tripeptide Arg-Gly-Asp (RGD), the binding site of different extracellular matrix proteins, e.g., fibronectin and vitronectin, has allowed the production of a wide range of cell adhesive surfaces. Although the surface density and spacing of the RGD peptide at the nanoscale have already shown a significant influence on cell adhesion, the impact of its hierarchical nanostructure is still rather unexplored. Accordingly, a versatile colloidal system named quatsomes, based on fluid nanovesicles formed by the self-assembling of cholesterol and surfactant molecules, has been devised as a novel template to achieve hierarchical nanostructures of the RGD peptide. To this end, RGD was anchored on the vesicle's fluid membrane of quatsomes, and the RGD-functionalized nanovesicles were covalently anchored to planar gold surfaces, forming a state of quasi-suspension, through a long poly(ethylene glycol) (PEG) chain with a thiol termination. An underlying self-assembled monolayer (SAM) of a shorter PEG was introduced for vesicle stabilization and to avoid unspecific cell adhesion. In comparison with substrates featuring a homogeneous distribution of RGD peptides, the resulting hierarchical nanoarchitectonic dramatically enhanced cell adhesion, despite lower overall RGD molecules on the surface. The new versatile platform was thoroughly characterized using a multitechnique approach, proving its enhanced performance. These findings open new methods for the hierarchical immobilization of biomolecules on surfaces using quatsomes as a robust and novel tissue engineering strategy., This work was supported by MICINN (PID2019-105622RBI00, MAT2016-80826-R, PID2019-111682RB-I00, PID2020-115296RA-I00, CTQ2015-66194-R; SAF2014-60138-R, RTI2018-093831-B-I00, and PDC2021-121481-I00); Instituto de Salud Carlos III (ISCIII) through the Networking Research Center on Bioengineering, Biomaterials and Nanomedicine, CIBER-BBN (FlexQS-skin, FlexCAB, BBN18PI01, BBN20PIV02, and CB/06/0074); Generalitat de Catalunya (grants 2017-SGR-918, 2017-SGR-229, 2017-SGR-1442, 2017-SGR-1439); the Fundació Marató de TV3 (Nr. 201812); the COST Action CA15126 Between Atom and Cell, and “ERDF A way of making Europe”. J.G. acknowledges financial support from the Ramón y Cajal Program (RYC-2017-22614) from MICINN and the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck Institute for Medical Research (Heidelberg, Germany). This work has received funding from the European Union’s Horizon 2020 research and innovation program through grant agreements 953110 (PHOENIX), 720942 (Smart4Fabry), 101007804 (MICRO4NANO), and 801342 (granted to the Agency for Business Competitiveness ACCIÓ through a Tecniospring Industry fellowship (TECSPR19-1-0065)). ICMAB acknowledges support from MICINN through the “‘Severo Ochoa”’ Programme for Centres of Excellence in R&D (CEX2019-000917-S). J.M. acknowledges a “Juan de la Cierva” fellowship from MICINN. J.T-M. acknowledges an FI-AGAUR grant (2020FI_B2 00137) from Generalitat de Catalunya and the European Social Fund. We also acknowledge the ICTS “NANBIOSIS for the support of the Synthesis of Peptides Unit (U3) at IQAC–CSIC (https://www.nanbiosis.es/portfolio/u3-synthesis-of-peptides-unit/) and the Biomaterial Processing and Nanostructuring Unit (U6) at ICMAB-CSIC (https://www.nanbiosis.es/portfolio/u6-biomaterial-processing-and-nanostructuring-unit/). We are grateful to the SMP unit of the Scientific and Technological Centers of University of Barcelona (CCiTUB). This work has been developed under the “Biochemistry, Molecular Biology and Biomedicine” and “Materials Science” Ph.D. programs of Universitat Autònoma de Barcelona (UAB)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

X-ray Detectors With Ultrahigh Sensitivity Employing High Performance Transistors Based on a Fully Organic Small Molecule Semiconductor/Polymer Blend Active Layer

  • Tamayo, Adrián
  • Fratelli, Ilaria
  • Ciavatti, Andrea
  • Martínez-Domingo, Carmen
  • Branchini, Paolo
  • Colantoni, Elisabetta
  • Rosa, Stefania De
  • Tortora, Luca
  • Contillo, Adriano
  • Santiago, Raul
  • Bromley, Stefan T.
  • Fraboni, Beatrice
  • Mas Torrent, Marta
  • Basiricò, Laura
The implementation of organic semiconductor (OSC) materials in X-ray detectors provides exciting new opportunities for developing a new generation of biocompatible devices with high potential for the fabrication of sensitive and low-cost X-ray imaging systems. Here, the fabrication of high performance organic field-effect transistors (OFETs) based on blends of 1,4,8,11-tetramethyl-6,13-triethylsilylethynyl pentacene (TMTES) with polystyrene is reported. The films are printed employing a low cost and high-throughput deposition technique. The devices exhibit excellent electrical characteristics with a high mobility and low density of hole traps, which is ascribed to the favorable herringbone packing (different from most pentacene derivatives) and the vertical phase separation in the blend films. As a consequence, an exceptional high sensitivity of (4.10 ± 0.05) × 1010 µCGy–1cm–3 for X-ray detection is achieved, which is the highest reported so far for a direct X-ray detector based on a tissue equivalent full organic active layer, and is higher than most perovskite film-based X-ray detectors. As a proof of concept to demonstrate the high potential of these devices, an X-ray image with sub-millimeter pixel size is recorded employing a 4-pixel array. This work highlights the potential exploitation of high performance OFETs for future innovative large-area and highly sensitive X-ray detectors for medical dosimetry and diagnostic applications., This work was funded by the Spanish Government within: research projects GENESIS PID2019-111682RB-I00 and RTI2018-095460-B-I00, the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S) and the “María de Maeztu” program for Spanish Structures of Excellence (MDM-2017-0767). Funding was also provided by the Generalitat de Catalunya (2017-SGR-918, 2017-SGR13). A.T. acknowledges his FPU fellowship and is enrolled in the UAB Materials Science PhD program. C.M-D. acknowledges her Juan de la Cierva grant (ref. FJC2019-042161-I) from Ministerio de Ciencia e Innovación. I.F., A.C., B.F. and L.B. acknowledge funding from INFN through the CSN5 FIRE project. All the authors acknowledge Giuliana Tromba and Diego Dreossi at ELETTRA synchrotron in Trieste for hardware and software technical support during the experiments, in particular for the acquisition of X-ray image. R.S. acknowledges funding from MINECO under grant agreement CTQ2017-87773-P/AEI/FEDER., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient Routes for the Preparation of Urazole Radical Self-Assembled Monolayers on Gold Surfaces

  • Campos Lendínez, Ángel
  • Crivillers, Núria
  • Bromley, Stefan T.
  • Rovira, Concepció
  • Breton, Gary W.
  • Mas Torrent, Marta
The functionalization of substrates with radical species has been shown to be a promising strategy to confer novel physical and chemical properties to a surface. Urazole radicals are persistent nitrogen-centered radicals that are insensitive to oxygen, making them desirable targets for the functionalization of surfaces. Here, we succeed in the preparation of self-assembled monolayers (SAMs) of a 1-arylurazole radical on Au surfaces using two different approaches. In the first approach, a SAM of a radical precursor on the gold surface is prepared followed by its chemical oxidation to generate the active urazole radical. In the second route, the radical is generated in solution and subsequently grafted on the Au surface. In both cases, the SAMs exhibit active radical behavior, but the SAM prepared by the first approach demonstrates greater surface coverage of the electroactive urazole radical species., This work was funded by the Spanish Ministry with the project GENESIS PID2019-111682RB-I00 and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S) and the Generalitat de Catalunya (2017-SGR-918). Á.C.-L. is enrolled in the UAB Materials Science PhD program. G.B. thanks Berry College for generous financial support. S.T.B. acknowledges financial support from the Spanish Ministerio de Ciencia, Innnovación y Universidades (RTI2018-095460-B-100, and MDM-2017-0767 via the Spanish Structures of Excellence María de Maeztu program), the Generalitat de Catalunya (2017SGR13), and the Red Espanola de Supercomputación (RES) for the provision of supercomputing time., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High throughput processing of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) organic semiconductors

  • Fijahi, Lamiaa
  • Li, Jinghai
  • Tamayo, Adrián
  • Volpi, Martina
  • Schweicher, Guillaume
  • Geerts, Yves H.
  • Mas Torrent, Marta
The deposition of organic semiconductors (OSCs) using solution shearing deposition techniques is highly appealing for device implementation. However, when using high deposition speeds, it is necessary to use very concentrated OSC solutions. The OSCs based on the family of dinaphtho[2,3-b:2',3'-f]thieno[3,2-b]thiophene (DNTT) have been shown to be excellent OSCs due to their high mobility and stability. However, their limited solubility hinders the processing of these materials at high speed. Here, we report the conditions to process alkylated DNTT and the S-shaped π-core derivative S-DNTT by bar-assisted meniscus shearing (BAMS) at high speed (i.e., 10 mm s-1). In all the cases, homogeneous thin films were successfully prepared, although we found that the gain in solubility achieved with the S-DNTT derivative strongly facilitated solution processing, achieving a field-effect mobility of 2.1 cm2 V-1 s-1, which is two orders of magnitude higher than the mobility found for the less soluble linear derivatives., This work was funded by the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob), the Spanish Ministry (project GENESIS PID2019-111682RB-I00 and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S)) and the Generalitat de Catalunya (2017-SGR-918). L. F. and J. L. are enrolled in the UAB Materials Science PhD program. J. L. acknowledges the Scholarship from the Chinese Council. G. S. is a FNRS research associate (Belgian National Fund for Scientific Research). G. S. acknowledges financial support from the Francqui Foundation (Francqui Start-Up Grant). Y. H. G. is thankful to FNRS for financial support through research projects Pi-Fast (No T.0072.18), Pi-Chir (No T.0094.22), and DIFFRA (No U.G001.19)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stable Organic Radical for Enhancing Metal–Monolayer–Semiconductor Junction Performance

  • Sousa, J. Alejandro de
  • Pfattner, Raphael
  • Gutiérrez Yatacue, Diego F.
  • Jutglar, Kilian
  • Bromley, Stefan T.
  • Veciana, Jaume
  • Rovira, Concepció
  • Mas Torrent, Marta
  • Fabre, Bruno
  • Crivillers, Núria
The preparation of monolayers based on an organic radical and its diamagnetic counterpart has been pursued on hydrogen-terminated silicon surfaces. The functional monolayers have been investigated as solid-state metal/monolayer/semiconductor (MmS) junctions showing a characteristic diode behavior which is tuned by the electronic characteristics of the organic molecule. The eutectic gallium–indium liquid metal is used as a top electrode to perform the transport measurements and the results clearly indicate that the SOMO–SUMO molecular orbitals impact the device performance. The junction incorporating the radical shows an almost two orders of magnitude higher rectification ratio (R(|J1V/J–1V|) = 104.04) in comparison with the nonradical one (R(|J1V/J–1V|) = 102.30). The high stability of the fabricated MmS allows the system to be interrogated under irradiation, evidencing that at the wavelength where the photon energy is close to the band gap of the radical there is a clear enhancement of the photoresponse. This is translated into an increase of the photosensitivity (Sph) value from 68.7 to 269.0 mA/W for the nonradical and radical based systems, respectively., This work was funded by MCIN/AEI/10.13039/501100011033 (grant GENESIS PID2019-111682RB-I00), the TED2021-122550B-C22, the “Severo Ochoa” Programme for Centers of Excellence in R&D FUNFUTURE CEX2019-000917-S, and the Generalitat de Catalunya (2017-SGR-918). The work was also supported by CSIC Interdisciplinary Thematic Platform (PTI+) on Quantum Technologies (PTI-QTEP+). This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094). This work was supported by the following research grants: PID2021-127957NB-I00 and TED2021-132550B-C21 (Ministerio de Ciencia e Innovación), CEX2021-001202-M (“María de Maeztu” program for Spanish Structures of Excellence). We also acknowledge access to supercomputer resources as provided by the Red Española de Supercomputación. J.A.d S. is enrolled in the UAB Materials Science PhD program. R.P. acknowledges support from the Ramón y Cajal Fellowship (ref. RyC2019-028474-I). S. Ababou-Girard and C. Meriadec (Institut de Physique de Rennes, UMR6251, France) are fully acknowledged for some XPS measurements on the Si-H surfaces., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001202-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic Effect of Solvent Vapor Annealing and Chemical Doping for Achieving High-Performance Organic Field-Effect Transistors with Ideal Electrical Characteristics

  • Li, Jinghai
  • Babuji, Adara
  • Fijahi, Lamiaa
  • James, Ann Maria
  • Resel, Roland
  • Salzillo, Tommaso
  • Pfattner, Raphael
  • Ocal, Carmen
  • Barrena, Esther
  • Mas Torrent, Marta
Contact resistance and charge trapping are two key obstacles, often intertwined, that negatively impact on the performance of organic field-effect transistors (OFETs) by reducing the overall device mobility and provoking a nonideal behavior. Here, we expose organic semiconductor (OSC) thin films based on blends of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8) with polystyrene (PS) to (i) a CH3CN vapor annealing process, (ii) a doping I2/water procedure, and (iii) vapors of I2/CH3CN to simultaneously dope and anneal the films. After careful analysis of the OFET electrical characteristics and by performing local Kelvin probe force microscopy studies, we found that the vapor annealing process predominantly reduces interfacial shallow traps, while the chemical doping of the OSC film is responsible for the diminishment of deeper traps and promoting a significant reduction of the contact resistance. Remarkably, the devices treated with I2/CH3CN reveal ideal electrical characteristics with a low level of shallow/deep traps and a very high and almost gate-independent mobility. Hence, this work demonstrates the promising synergistic effects of performing simultaneously a solvent vapor annealing and doping procedure, which can lead to trap-free OSC films with negligible contact resistance problems., This work was funded by the projects GENESIS PID2019-111682RB-I00, PID2019-110907GB-I00 and FUNFUTURE CEX2019-000917-S from MCIN/AEI/10.13039/501100011033/, by the Generalitat de Catalunya (2017-SGR-918) and by the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska–Curie grant agreement no. 811284 (UHMob). J.L. acknowledges funding from the Chinese Scholarship Council (CSC) and J.L., A.B., and L.F. are enrolled in the UAB Materials Science PhD program. A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. The authors acknowledge Dr. Francesco D’Amico and the CERIC-ERIC Consortium for the access to experimental facilities and financial support (proposal number 20217080). T.S. thanks the European co-financing project FSE REACT EU-PON R&I 2014-2020. R.P. acknowledges support from the Ramón y Cajal Fellowship (ref RyC2019-028474-I)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Binder polymer influence on the electrical and UV response of organic field-effect transistors

  • Li, Jinghai
  • Tamayo, Adrián
  • Quintana García, Aleix
  • Riera Galindo, Sergi
  • Pfattner, Raphael
  • Gong, Yanyan
  • Mas Torrent, Marta
The use of blends of small molecule organic semiconductors (OSCs) with insulating binding polymers has been shown to be a promising route to facilitate the processing of OSCs over large areas using printing techniques. Here we fabricated organic field-effect transistors (OFETs) and phototransistors using the benchmark OSC 7-decyl-2-phenyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10) and blends of this material with polystyrene (PS), poly(pentafluorostyrene) (PFS) and poly(methyl methacrylate) (PMMA). We show that the nature of the binding polymer has a significant impact on the device performance. The OFETs showing the best performance are the ones based on blends of PS since they reveal less interfacial traps, leading to devices with higher mobility, threshold voltage close to zero and high bias stress stability. The lowest OFET performance is found in the devices based on PMMA blends due to the higher density of majority charge carrier (i.e., holes) traps. On the other hand, regarding the response of the devices to UV light, the PFS and pristine films exhibited the highest photoresponse, which was attributed to the higher density of minority charge carrier (i.e., electrons) traps. Therefore, this work demonstrates that the binding polymer is a useful tool to optimise the OFET electrical characteristics as well as its photoresponsivity., This work was funded by the projects GENESIS PID2019-111682RB-I0 and Severo Ochoa FUNFUTURE CEX2019-000917-S from MCINN/AEI/10.13039/501100011033/and by the Generalitat de Catalunya (2017-SGR-918). J. L. acknowledges funding from the Chinese Scholarship Council (CSC). J. L. is enrolled in the UAB Materials Science PhD program. S.R-G. acknowledges support from the Marie Skłodowska Curie Cofund, Beatriu de Pinós Fellowship (AGAUR-2019 BP 00200). R. P. acknowledges support from the Ramón y Cajal Fellowship (Ref. RyC2019-028474-I)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dopant Diffusion Inhibition in Organic Field-Effect Transistors Using Organic Semiconductor/High-Molecular-Weight Polymer Blends

  • Li, Jinghai
  • Colantoni, Elisabetta
  • Temiño, Inés
  • Branchini, Paolo
  • Tortora, Luca
  • Mas Torrent, Marta
Molecular contact doping in organic field-effect transistors (OFETs) has been proved to be a very efficient strategy to reduce the device contact resistance. It consists of inserting a dopant layer between the organic semiconductor (OSC) and the top gold contacts to reduce the energy barrier required to inject/release charges. However, a main bottle-neck for its implementation is that the dopant diffuses toward the OFET channel with time, doping the OSC, and hampering the on/off switching device capability. In this work, we fabricated OFETs based on the benchmark OSC 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT-C8) by a solution shearing technique. First, we show that the OFET performance of these devices is significantly improved when a layer of the p-dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) is inserted before the evaporation of the gold source/drain contacts. Remarkably, we demonstrate that the dopant diffusion can be controlled by blending the OSC with polystyrene (PS) of different molecular weights. In-depth electrical characterization combined with studies of surface and in-depth distribution of the dopant by time-of-flight secondary ion mass spectrometry (ToF-SIMS) unambiguously show that in thin films of OSC blends with high-molecular-weight PS, the dopant remained drastically confined into the contact areas, which was reflected by an enhanced long-term device stability., This work was funded by the project GENESIS PID2019-111682RB-I00 from MICINN/AEI, the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), and the Generalitat de Catalunya (2021 SGR 00443). J.L. is enrolled in the UAB Materials Science PhD program and acknowledges the Scholarship from the Chinese Council. E.C., P.B., and L.T. acknowledge funding from INFN through the CSN5 FIRE project. The authors also thank A. Tamayo for his help in the AFM images analysis., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric behavior of curcuminoid polymorphs on different substrates by direct soft vacuum deposition

  • Riba López, Daniel
  • Zaffino, Rossella
  • Herrera, Daniel
  • Matheu, Roc
  • Silvestri, Francesco
  • Silva, Jesse Ferreira da
  • Sañudo, Eva Carolina
  • Mas Torrent, Marta
  • Barrena, Esther
  • Pfattner, Raphael
  • Ruiz, Eliseo
  • González Campo, Arántzazu
  • Aliaga Alcalde, Nuria
Our work examines the structural-electronic correlation of a new curcuminoid, AlkCCMoid, as a dielectric material on different substrates. For this purpose, we show a homemade sublimation method that allows the direct deposition of molecules on any type of matrix. The electronic properties of AlkCCMoid have been evaluated by measurements on single crystals, microcrystalline powder, and sublimated samples, respectively. GIWAXS studies on surfaces and XRD studies on powder have revealed the existence of polymorphs and the effect that substrates have on curcuminoid organization. We describe the dielectric nature of our system and identify how different polymorphs can affect electronic parameters such as permittivity, all corroborated by DFT calculations., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 R&D program (ERC-724981). This work was also supported by the projects PID2019-108794GB-I00, GENESIS PID2019-111682RB-I00, PID2019-110907GB-I00, and PID2021-122464NB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. E.C.S. acknowledges the financial support from the Spanish Government, (Grant PGC2018-098630-B-I00). R.P. acknowledges support from the Ramón y Cajal Fellowship (Ref. RyC2019-028474-I). J.dS. thanks to the MChem program of the University of Southampton. E.R. thanks Generalitat de Catalunya by a ICREA Academia award, Spanish Ministry Science for a Maria de Maeztu excellence grant (MDM-2017-0767), and computer resources, technical expertise and assistance provided by the Barcelona Supercomputing Center. R.M. thanks “la Caixa” Foundation (ID 100010434) for a Junior Leader fellowship (LCF/BQ/PI22/11910024). The crystal structures were collected at beamline XALOC at ALBA Synchrotron (Exp. 2017042211). The CSIC authors acknowledge the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE,2020-2023). GIWAXS experiments were performed at the beam line BL11 – NCD-SWEET at ALBA Synchrotron with the collaboration of ALBA staff ; we also thank the support from Alba Cazorla., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic carbon gate electrodes for the development of electrolyte-gated organic field effect transistor bio-sensing platforms

  • Tamayo, Adrián
  • Muñoz Martín, José M.
  • Martínez Domingo, Carme
  • Mas Torrent, Marta
Electrolyte-gated organic field-effect transistors (EGOFETs) are promising devices for the development of bio-sensors. Typically, a gold gate electrode is functionalised with a self-assembled monolayer bearing the bio-receptor. Here, we propose a new route to fabricate EGOFET sensors using magnetic carbon-paste gate electrodes. In this way, magnetic nanoparticles properly modified with a bio-receptor are incubated with the analyte and, subsequently, collected on the gate electrode surface. Remarkably, these electrodes can be polished and re-used after each measurement. The feasibility of this route is here demonstrated for the biotin-avidin/streptavidin supramolecular complexes. High sensitivities and low limits of detection of the order of fM are achieved. Hence, this work demonstrates a novel and versatile strategy to exploit EGOFETs as sensing platforms., This work was funded by the Spanish Government within the research project GENESIS PID2019-111682RB-I00 and the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S). Funding was also provided by the Generalitat de Catalunya (2021 SGR 00443). C. M. acknowledges the Juan de la Cierva fellowship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular One- and Two-Qubit Systems with Very Long Coherence Times

  • Schäfter, Dennis
  • Wischnat, Jonathan
  • Tesi, Lorenzo
  • Sousa, J. Alejandro de
  • Little, Edmund
  • McGuire, Jake
  • Mas Torrent, Marta
  • Rovira, Concepció
  • Veciana, Jaume
  • Tuna, Floriana
  • Crivillers, Núria
  • Slageren, Joris van
General-purpose quantum computation and quantum simulation require multi-qubit architectures with precisely defined, robust interqubit interactions, coupled with local addressability. This is an unsolved challenge, primarily due to scalability issues. These issues often derive from poor control over interqubit interactions. Molecular systems are promising materials for the realization of large-scale quantum architectures, due to their high degree of positionability and the possibility to precisely tailor interqubit interactions. The simplest quantum architecture is the two-qubit system, with which quantum gate operations can be implemented. To be viable, a two-qubit system must possess long coherence times, the interqubit interaction must be well defined and the two qubits must also be addressable individually within the same quantum manipulation sequence. Here results are presented on the investigation of the spin dynamics of chlorinated triphenylmethyl organic radicals, in particular the perchlorotriphenylmethyl (PTM) radical, a mono-functionalized PTM, and a biradical PTM dimer. Extraordinarily long ensemble coherence times up to 148 µs are found at all temperatures below 100 K. Two-qubit and, importantly, individual qubit addressability in the biradical system are demonstrated. These results underline the potential of molecular materials for the development of quantum architectures., The authors acknowledge the following funding: Center for Integrated Quantum Science and Technology, Carl Zeiss Foundation, Baden Württemberg Stiftung (QT5), Vector Foundation, Fonds der Chemischen Industrie. The work was also supported by Generalitat de Catalunya 2021 SGR 00443, MICINN (GENESIS PID2019-111682RB-I00), and the “Severo Ochoa” Programme for Centers of Excellence in R&D FUNFUTURE CEX2019-000917-S, CSIC Interdisciplinary Thematic Platform on Quantum Technologies (PTI QTEP+) (20219PT016, QTP2021-03-003). This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. The authors further acknowledge financial support from EPSRC (UK) by funding the EPSRC National Research Facility for EPR spectroscopy at Manchester (NS/A000055/1; EP/W014521/1). The authors thank Yannick Thiebes for recording the powder X-ray diffractogram of Figure S15, Supporting Information., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorescent Switchable Surfaces Based on Quantum Dots Modified With Redox-Active Molecules

  • Campos Lendínez, Ángel
  • Muñoz Martín, José M.
  • Crivillers, Núria
  • Mas Torrent, Marta
By combining the switching ability of redox molecules with the unique fluorescence properties of quantum dots (QDs), a robust electrochemical fluorescence switch is developed here. This is realized by grafting CdSe/ZnS QDs on transparent indium tin oxide (ITO) substrates and, subsequently, modifying them with a Ferrocene (Fc) molecular monolayer. The application of oxidation/reduction voltage pulses to tune the Fc redox state leads to the tuning of the surface fluorescence output. Interestingly, the ON/OF ratio can be enhanced by reducing the distance between the redox active unit and the QD due to a more efficient electronic coupling. Remarkably, by defining a mixed-valence state, a ternary switch has also been achieved. It is highlighted that the QD surface immobilization is key to realize this switch to avoid aggregation and fluorescence quenching in suspension. Hence, an efficient and versatile novel route to fabricate robust fluorescent redox switches is demonstrated, opening a wide avenue of possibilities to be explored in the field of sensing and information storage., This work was funded by MCIN/AEI/10.13039/501100011033/ERDF,UE with projects GENESIS PID2019-111682RB-I00 and SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S) and the Generalitat de Catalunya (2021-SGR-00443). Á.C.-L. is enrolled in the UAB Materials Science Ph.D.program. The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

pH Sensor Based on Supramolecular Host-Guest Interactions and an Organic Field-Effect Transistor with a Magnetic Carbon Gate Electrode

  • Tamayo, Adrián
  • Campos Lendínez, Ángel
  • Muñoz Martín, José M.
  • Crivillers, Núria
  • Mas Torrent, Marta
A robust electrolyte-gated organic field-effect transistor (EGOFET) able to respond to pH in the range 1-10 is reported. This is realized by exploiting the pH-dependent supramolecular host-guest complexation of imidazole/β-cyclodextrin (β-CD). The sensing protocol is performed by incubating magnetic nanoparticles functionalized with β-CD with imidazole solutions at different pHs and trapping them in a magnetic carbon electrode. Such an electrode is then implemented as gate contact in the EGOFET. At higher pH, the complexation is more favored, resulting in a negative shift of the device transfer characteristics. Remarkably, the carbon gate electrode can be polished and reused and the devices show high stability and reproducibility., This work was funded by the Spanish Government within the research project GENESIS PID2019-111682RB-I00 and the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S). Funding was also provided by the Generalitat de Catalunya (2021 SGR 00443). Á.C.-L. is enrolled in the UAB Materials Science Ph.D. program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale Operando Characterization of Electrolyte-Gated Organic Field-Effect Transistors Reveals Charge Transport Bottlenecks

  • Tanwar, Shubham
  • Millan Solsona, Ruben
  • Ruiz Molina, Sara
  • Mas Torrent, Marta
  • Kyndiah, Adrica
  • Gomila, Gabriel
Charge transport in electrolyte-gated organic field-effect transistors (EGOFETs) is governed by the microstructural property of the semiconducting thin film that is in direct contact with the electrolyte. Therefore, a comprehensive nanoscale operando characterization of the active channel is crucial to pinpoint various charge transport bottlenecks for rational and targeted optimization of the devices. Here, the local electrical properties of EGOFETs are systematically probed by in-liquid scanning dielectric microscopy (in-liquid SDM) and a direct picture of their functional mechanism at the nanoscale is provided across all operational regimes, starting from subthreshold, linear to saturation, until the onset of pinch-off. To this end, a robust interpretation framework of in-liquid SDM is introduced that enables quantitative local electric potential mapping directly from raw experimental data without requiring calibration or numerical simulations. Based on this development, a straightforward nanoscale assessment of various charge transport bottlenecks is performed, like contact access resistances, inter- and intradomain charge transport, microstructural inhomogeneities, and conduction anisotropy, which have been inaccessible earlier. Present results contribute to the fundamental understanding of charge transport in electrolyte-gated transistors and promote the development of direct structure-property-function relationships to guide future design rules., This work had received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 81386 (BORGES), from the European Horizon-EIC program under Grant Agreement No. 101046719 (PRINGLE) and by the Spanish Ministerio de Economıa, Industria y Competitividad, and the EU FEDER, through Grant Nos. PID2019-110210GB-I00 (BIGDATASPM) and PID2019-111682RB-I00 (GENESIS), and the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE Grant Nos. CEX2019-000917-S and CEX2018-000789-S). The authors also acknowledge support from the Generalitat de Catalunya through Grant No. 2021SGR-00453 and the CERCA Program. G.G. acknowledges support from the ICREA Academia program. S.T. acknowledges the support from Joerg Barner (JPK) regarding automating the AFM operations. The authors would like to thank Prof. T. Cramer for providing the measurement software that allowed the macroscale I–V characterization of the EGOFETs., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Polymer Molecular Weight Yields Solar Cells with Simultaneously Improved Performance and Thermal Stability

  • Riera Galindo, Sergi
  • Sanz Lleó, Marta
  • Gutiérrez Fernández, Edgar
  • Ramos, Nicolás
  • Mas Torrent, Marta
  • Martín, Jaime
  • López Mir, Laura
  • Campoy Quiles, Mariano
Simple synthetic routes, high active layer thickness tolerance as well as stable organic solar cells are relentlessly pursued as key enabling traits for the upscaling of organic photovoltaics. Here, the potential to address these issues by tuning donor polymer molecular weight is investigated. Specifically, the focus is on PTQ10, a polymer with low synthetic complexity, with number average molecular weights of 2.4, 6.2, 16.8, 52.9, and 54.4 kDa, in combination with three different non-fullerene acceptors, namely Y6, Y12, and IDIC. Molecular weight, indeed, unlocks a threefold increase in power conversion efficiency for these blends. Importantly, efficiencies above 10% for blade coated devices with thicknesses between 200 and 350 nm for blends incorporating high molecular weight donor are shown. Spectroscopic, GIWAXS and charge carrier mobility data suggest that the strong photocurrent improvement with molecular weight is related to both, improved electronic transport and polymer contribution to exciton generation. Moreover, it is demonstrated that solar cells based on high molecular weight PTQ10 are more thermally stable due to a higher glass transition temperature, thus also improving device stability., The authors are grateful to 1-Material for providing custom molecular weight PTQ10 polymer and for the fruitful discussions. S.R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement No. 101025608, IDEAL; for the financial support provided by Ajuntament de Barcelona and the Ministeri de Ciència i Innovació within the framework of Barcelona Capital Cultural i Científic, through the project Bus Stop Integrated Organic Photovoltaic (TERRA) (22S09542-001). The authors acknowledge Dr. Bernhard Dörling for building the electronic controller of the accelerated blade coater and Dr. M. Gibert-Roca for designing the corresponding multiplexor. M.C.-Q. thanks to the Spanish Ministry of Science and Innovation for funding through projects PID2021-128924OB-I00 and TED2021-131911B-I00. This work was supported by the MADRAS project funded from the European Union Horizon 2020 research and innovation programme under grant agreement No. 862492. .This work was also funded by MCIN/AEI/10.13039/501100011033/ERDF,UE with projects GENESIS PID2019-111682RB-I00 and SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing molecular arrangements of the organic semiconductor 2,7-Dioctyl[1]benzothieno[3,2- b][1]benzothiophene thin film at the interface by UV Resonant Raman scattering

  • Salzillo, Tommaso
  • Li, Jinghai
  • Pfattner, Raphael
  • Venuti, Elisabetta
  • Mas Torrent, Marta
  • D'Amico, Francesco
Raman spectroscopy was employed to investigate nanometric thick films of the organic semiconductor 2,7-Dioctyl[1]benzothieno[3,2-b][1]benzothiophene, following a comprehensive vibrational characterization of the compound condensed phases at various excitation wavelengths. UV Raman excitation enabled the characterization of the thin films, revealing that the molecular orientation at the film/air interface is characterized by a different organization and/or a high degree of disorder compared to the bulk phase. The low penetration depth of the UV Raman excitation allows for the retrieval of this information, unlike the XRD data., T.S. thanks the Programma per Giovani Ricercatori “Rita Levi Montalcini” year 2020 (grant PGR20QN52R) of the Italian Ministry of University and Research (MUR) for the financial support. T. S. and F. D. acknowledge CERIC-ERIC for providing access to the Elettra IUVS-OFF beamline (beamtime number 20187028). J. L., R. P. and M. M-T. also a acknowledge. funding from MCIN/AEI/10.13039/501100011033/ERDF,UE with projects GENESIS PID2019–111682RB-I00 and SENSATION PID2022–141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURECEX2019–000917-S) and the Generalitat de Catalunya (2021-SGR-00443). R.P. acknowledges support from the Ramón y Cajal Fellowship (Ref. RyC2019–028474-I). This work has been supported by the project ”POLYPHON - Polymorph screening to enable electron-phonon coupling engineering in organic semiconductors” funded by the MUR Progetti di Ricerca di Rilevante Interesse Nazionale (PRIN) Bando 2022 - grant 2022XZ2ZM8., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

N-Doped Octagon-Containing HBC as Redox and pH Chiroptical Switch in the NIR

  • Medel, Miguel A.
  • Hortigüela, Lidia
  • Lloveras, Vega
  • Catalán Toledo, José I.
  • Miguel, Delia
  • Mota, Antonio J.
  • Crivillers, Núria
  • Campaña, Araceli G.
  • Morcillo, Sara P.
The optical and chiroptical properties of an aza-HBC-oct-[5]helicene have been studied and also modulated by means of protonation or oxidation. In both cases, the generated species shows a new absorption band in the NIR region that is not present in the neutral species. This result enables this N-doped nanographene to act both as optical and, remarkably, as chiroptical switch since both the CD and CPL can be modulated by external stimuli such as redox or pH changes., We acknowledge funding from FEDER(EDRF)/Junta de Andalucía-Consejería de Transformación Económica, Industria, Conocimiento y Universidades (B-FQM-428-UGR20), Plan Andaluz de Investigación, Desarrollo e Innovación2021 (P21-00133), Ministerio de Ciencia e Innovación (GENESIS PID2019-111682RB−I00, the PID2019-105622RB−I00), Generalitat de Catalunya (2021-SGR-00443) and the “Severo Ochoa” Programme for Centers of Excellence in R&D FUNFUTURE CEX2019-000917-S. L. H. thanks the Junta de Andalucía for a FPDI contract 2021 (PREDOC_00408). J. C.-T. thanks DOC-FAM fellowship (grant agreement Nr. 754397 through H2020-MSCA-COFUND-2016). J. C−T. is enrolled in the Materials Science PhD program of UAB. Authors thank the Centro de Servicios de Informática y Redes de Comunicación (CSIRC), UGR, for providing the computing time., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Redox-Active Au Nanoparticles Self-Assembled at Liquid-Liquid Interface via C-Au Functionalization for Dye Degradation Electrocatalysis

  • Catalán Toledo, José
  • Djafari, Jamila
  • Mas Torrent, Marta
  • Crivillers, Núria
This work presents the synthesis of poly(vinylpyrrolidone)-stabilized gold nanoparticles (Au NPs) and their subsequent functionalization with molecules bearing terminal alkynes. The ligand exchange occurs at the liquid-liquid interface (LLI), resulting in the formation of Au NPs stabilized through the covalent C-Au functionalization. Simultaneously, structured composite films are formed, driven by the self-assembly of the Au NPs supported by the polymer. A comparative analysis involving three distinct alkyne-terminated derivatives reveals that film formation is favored when the ligand includes an aromatic unit such as in a ferrocenyl-stilbene derivative. The LLI films can be easily transferred to solid a support for their characterization. Additionally, it is demonstrated that these films serve as a potential electrocatalytic platform. As a proof of concept, we demonstrate that the electrochemically active ferrocene-based Au NPs films can efficiently remove methylene blue via an electro-Fenton-like reaction, surpassing the efficiency of the non-redox phenylacetylene Au NP films., The authors thank Dr. J. A. De Sousa for his help with the technical aspects of the synthesis. Dr. T. Jawhari for the Raman spectroscopy measurements (CCiT-UB), Prof. Dr. I. Moreno-Villoslada for discussing the results, and Dr. F. Minges for providing the academic license of the Spectragryph software for spectroscopy data processing and the electron microscopy service at the ICMAB-CSIC and ICN2. This work was funded by the Spanish Ministry (MCIN/AEI/10.13039/501100011033/ERDF, UE) with projects GENESIS PID2019-111682RB-I00 and SENSATION PID2022-141393OB-I0, the “Severo Ochoa” Programme for Centres of Excellence in R&D (FUNFUTURE CEX2019-000917-S), the ERASAM project (TED2021-132550B–C22) and the Generalitat de Catalunya (2021-SGR-00443). This research is part of the CSIC program within the Interdisciplinary Thematic Platform on Quantum Technologies (PTI QTEP+) for the Spanish Recovery, Transformation, and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. J.C.-T. thanks the DOC-FAM Fellowship, grant agreement no. 754397 through H2020-MSCA-COFUND-2016. The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). J.C.-T. is enrolled in the UAB Materials Science Ph.D. program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interrogating the CISS effect in chiral and paramagnetic organic radicals: the impact of the molecular spin over the total spin polarization

  • Sousa, J. Alejandro de
  • Mayorga-Burrezo, Paula
  • Míguez Lago, Sandra
  • Catalán Toledo, José
  • Ramos Tomás, Raúl
  • Ortuño, Ana
  • Zotti, Linda A.
  • Palacios, Juan José
  • Campaña, Araceli G.
  • Veciana, Jaume
  • Crivillers, Núria
Continuous research on new chiral molecular materials brings new exciting properties to the field of molecular electronics. The discovery of the chirality-induced spin selectivity (CISS) effect has expanded the list of applications for chiral structures, opening promising avenues for their exploitation in molecular spintronics. In this work, the persistent propeller-like organic perchlorotriphenylmethyl (PTM) radical is investigated as a potential spin filter combining chirality and paramagnetism. In particular, two different PTM derivatives, mono- and bis-functionalized, with one or two terminal alkyne groups have been used for the preparation of enantioenriched solid-state assemblies. The analysis of their chiroptical properties reveals that the functionalization does not play a crucial role in their final conformational stability and highlights the dissimilarities of the racemization barriers in solution and solid states. Spin-dependent electrochemical and charge transport measurements of enantioenriched PTM-based self-assembled monolayers did not reveal the existence of the CISS effect. Density functional theory quantum transport calculations show that the most dominant contribution to the spin polarization would not be CISS-related polarization, but the one intrinsically associated with the radical spin. Nevertheless, at room temperature this contribution is affected by thermal fluctuations averaging to a net zero spin polarization., The work was supported by Generalitat de Catalunya (2021SGR00443), PID2019-111682RB-I00, PID2022-141393OB-I0, PID2021-127521NB-I00, PID2021-125604NB-I00, PID2019- 109539GB-C43, and PID2022-141712NB-C21 funded by MCIN/AEI/10.13039/501100011033 and ERDF “A way of making Europe” and TED2021-131323B-I00 NextGenerationEU, the “Severo Ochoa” Programme for Centers of Excellence in R&D FUNFUTURE CEX2019-000917-S through the competitive FUNMAT-FIP-2018 grant and the European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP). J. C.-T. thanks the DOC-FAM fellowship, grant agreement No. 754397 (H2020-MSCA-COFUND-2016). J. C.-T. is enrolled at the UAB Materials Science PhD program. S. M-L. acknowledges the funding received from the Spanish Junta de Andalucía (DOC 01165). The authors thank the Centro de Servicios de Informática y Redes de Comunicación (CSIRC), UGR, for providing the computing time. L. A. Z. and J. J. P. acknowledge María de Maeztu Program for Units of Excellence in R&D (Grant No. CEX2018-000805-M), Generalitat Valenciana through Programa Prometeo (2021/017) and Centro de Computación Científica of the Universidad Autónoma de Madrid., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Perspectives for polychlorinated trityl radicals

  • Ratera Bastardas, Imma|||0000-0002-1464-9789
  • Vidal-Gancedo, José|||0000-0002-1853-9675
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Bromley, Stefan|||0000-0002-7037-0475
  • Crivillers, Núria|||0000-0001-6538-2482
  • Mas-Torrent, Marta|||0000-0002-1586-005X
An organic free radical is a molecule with one or more unpaired electrons. Although most free radicals are highly reactive, chemists have developed a few families of so-called persistent organic radicals with high kinetic stabilities. Polychlorinated trityl radicals, also known as polychlorotriphenylmethyl (PTM) radicals, are particularly chemically stable due to the high steric hindrance provided by the chlorine atoms in ortho positions which protect their single unpaired electron localised on the central carbon atom. In addition to their inherent magnetic spin due to the unpaired electron, PTMs exhibit other appealing properties such as a rich electrochemistry and characteristic optical properties (absorption and emission). Moreover, it has been shown that these properties can be tuned through the preparation of a large library of PTM-based derivatives. Here, we review recent developments employing PTM radicals, which include their implementation in molecular electronic junctions/switches, as building blocks for the preparation of magnetic networks and opto-electronic devices/materials and their exploitation in bio-applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Real-time threshold voltage compensation on dual-gate electrolyte-gated organic field-effect transistors

  • Lago, Nicolò|||0000-0001-7309-6697
  • Buonomo, Marco|||0000-0001-7339-1549
  • Ruiz Molina, Sara|||0000-0002-8792-4411
  • Pollesel, Andrea|||0000-0002-8623-3213
  • Hensel, Rafael C.|||0000-0001-7060-6604
  • Sedona, Francesco|||0000-0002-7225-9498
  • Sambi, Mauro|||0000-0002-7105-4001
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Casalini, Stefano|||0000-0003-3609-1154
  • Cester, Andrea|||0000-0001-6583-1735
Electrolyte-Gated Organic Field-Effect Transistors (EGOFETs) offer many opportunities for the development of low-cost and low-power electronics suitable for applications like sensors and point-of-care tests; however, EGOFETs can be affected by the drift of their operative point that causes signals distortion and loss of information during sensing applications. Here, a blend of 2,8-Difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene (diF-TES-ADT) and polystyrene (PS) is used as the active material for the fabrication of dual-gate EGOFETs. We exploited the dual-gate architecture to improve EGOFETs stability by implementing digital feedback that uses the back-gate electrode to compensate dynamically for the transistor threshold voltage allowing us to fix its operative point for prolonged tests (>10 h) with different aqueous solutions (Milli-Q water, NaCl 0.1 M and a physiological solution). The presented real-time threshold voltage compensation does not only allow to steady EGOFETs DC output current, but it also preserves EGOFETs sensing capability for the detection of signals with frequencies as low as 1 Hz.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Photoswitching activation of a ferrocenyl-stilbene analogue by its covalent grafting to gold

  • Bejarano, Francesc|||0000-0002-8006-7138
  • Gutiérrez, Diego|||0000-0001-6007-0906
  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Roca-Sanjuán, Daniel|||0000-0001-6495-2770
  • Gierschner, Johannes|||0000-0001-8177-7919
  • Veciana i Miró, Jaume|||0000-0003-1023-9923
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Rovira Angulo, Concepció|||0000-0002-2365-9479
  • Crivillers, Núria|||0000-0001-6538-2482
Until now, surface-deposited stilbenes have been much less studied than other photochromic systems. Here, an asymmetrically substituted styrene incorporating a redox-active ferrocene moiety and a terminal alkyne group has been synthesised to investigate its photoisomerization in solution, and upon the formation of chemisorbed self-assembled monolayers through a carbon-gold bond formation. Charge transport measurements across the monolayers reveal that upon chemical linkage to the gold substrate there is an alteration of the isomerization pathway, which favours the trans to cis conversion, which is not observed in solution. The experimental observations are interpreted based on quantum chemistry calculations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Redox-Active Au Nanoparticles Self-Assembled at Liquid-Liquid Interface via C-Au Functionalization for Dye Degradation Electrocatalysis

  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Djafari, Jamila|||0000-0003-2817-0338
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Crivillers, Núria|||0000-0001-6538-2482
This work presents the synthesis of poly(vinylpyrrolidone)-stabilized gold nanoparticles (Au NPs) and their subsequent functionalization with molecules bearing terminal alkynes. The ligand exchange occurs at the liquid-liquid interface (LLI), resulting in the formation of Au NPs stabilized through the covalent C-Au functionalization. Simultaneously, structured composite films are formed, driven by the self-assembly of the Au NPs supported by the polymer. A comparative analysis involving three distinct alkyne-terminated derivatives reveals that film formation is favored when the ligand includes an aromatic unit such as in a ferrocenyl-stilbene derivative. The LLI films can be easily transferred to solid a support for their characterization. Additionally, it is demonstrated that these films serve as a potential electrocatalytic platform. As a proof of concept, we demonstrate that the electrochemically active ferrocene-based Au NPs films can efficiently remove methylene blue via an electro-Fenton-like reaction, surpassing the efficiency of the non-redox phenylacetylene Au NP films.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Interrogating the CISS effect in chiral and paramagnetic organic radicals, the impact of the molecular spin over the total spin polarization

  • De Sousa, J. Alejandro|||0000-0002-7948-8162
  • Mayorga-Burrezo, Paula|||0000-0002-2747-9344
  • Míguez-Lago, Sandra|||0000-0002-0424-3574
  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Ramos-Tomás, Raúl|||0000-0001-8325-7140
  • Ortuño, Ana|||0000-0001-8562-7248
  • Zotti, Linda A.|||0000-0002-5292-6759
  • Palacios, Juan Jose|||0000-0003-2378-0866
  • González Campaña, Araceli|||0000-0001-5483-5642
  • Veciana i Miró, Jaume|||0000-0003-1023-9923
  • Crivillers, Núria|||0000-0001-6538-2482
Continuous research on new chiral molecular materials brings new exciting properties to the field of molecular electronics. The discovery of the chirality-induced spin selectivity (CISS) effect has expanded the list of applications for chiral structures, opening promising avenues for their exploitation in molecular spintronics. In this work, the persistent propeller-like organic perchlorotriphenylmethyl (PTM) radical is investigated as a potential spin filter combining chirality and paramagnetism. In particular, two different PTM derivatives, mono- and bis-functionalized, with one or two terminal alkyne groups have been used for the preparation of enantioenriched solid-state assemblies. The analysis of their chiroptical properties reveals that the functionalization does not play a crucial role in their final conformational stability and highlights the dissimilarities of the racemization barriers in solution and solid states. Spin-dependent electrochemical and charge transport measurements of enantioenriched PTM-based self-assembled monolayers did not reveal the existence of the CISS effect. Density functional theory quantum transport calculations show that the most dominant contribution to the spin polarization would not be CISS-related polarization, but the one intrinsically associated with the radical spin. Nevertheless, at room temperature this contribution is affected by thermal fluctuations averaging to a net zero spin polarization.