Pasar al contenido principal

ESTRUCTURA ELECTRONICA Y PROPIEDADES FISICAS DE MOLECULAS Y SOLIDOS INORGANICOS

PID2021-122464NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

An air-stable high-performance single-molecule magnet operating as a luminescent thermometer below its blocking temperature

  • Corredoira Vázquez, Julio
  • González-Barreira, Cristina
  • Fondo Busto, María Matilde
  • García Deibe, Ana María
  • Sanmartín Matalobos, Jesús
  • Gómez Coca, Silvia
  • Ruiz, Eliseo
  • Brites, Carlos D. S.
  • Carlos, Luis D.
The field of molecule magnets has advanced significantly in recent years. Yet, key challenges persist for their practical applications, such as achieving higher blocking temperatures and maintaining precise temperature control in air-stable magnets. This work addresses aspects related to both challenges. Thus, it presents the air-stable hexagonal bipyramidal compound {[Dy(LN6en)(OSiPh3)2](BPh4)}·1.5CH2Cl2 (1·1.5CH2Cl2) and its diluted analogue {[Dy0.1Y0.9(LN6en)(OSiPh3)2](BPh4)}·1.5CH2Cl2 (1@Y·1.5CH2Cl2). Their high axiality, achieved by reducing equatorial charge, enables magnetic behaviour with energy barriers higher than 1500 K and blocking temperatures based on hysteresis (THB) of 12 and 40 K, respectively. Hence, 1@Y·1.5CH2Cl2 is the SMM with the highest THB reported among air-stable uncapsulated molecule magnets. Besides, both complexes show temperature-dependent luminescence. Remarkably, 1@Y·1.5CH2Cl2 stands out as the pioneering example of a bifunctional molecule magnet and luminescent thermometer with both functionalities active below its THB. This breakthrough makes it possible to monitor the temperature of a molecule in the range where it exhibits remanent magnetization for the first time. Moreover, this molecular material presents by far the best magnetic characteristics (Ueff and THB) of any SMM luminescent thermometer reported to date. Experimental magnetic and luminescent data are analysed using theoretical calculations. Notably, luminescence is interpreted via coupled cluster methods, offering a more sophisticated alternative to the traditional time-dependent DFT approach
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric behavior of curcuminoid polymorphs on different substrates by direct soft vacuum deposition

  • Riba López, Daniel
  • Zaffino, Rossella
  • Herrera, Daniel
  • Matheu, Roc
  • Silvestri, Francesco
  • Silva, Jesse Ferreira da
  • Sañudo, Eva Carolina
  • Mas Torrent, Marta
  • Barrena, Esther
  • Pfattner, Raphael
  • Ruiz, Eliseo
  • González Campo, Arántzazu
  • Aliaga Alcalde, Nuria
Our work examines the structural-electronic correlation of a new curcuminoid, AlkCCMoid, as a dielectric material on different substrates. For this purpose, we show a homemade sublimation method that allows the direct deposition of molecules on any type of matrix. The electronic properties of AlkCCMoid have been evaluated by measurements on single crystals, microcrystalline powder, and sublimated samples, respectively. GIWAXS studies on surfaces and XRD studies on powder have revealed the existence of polymorphs and the effect that substrates have on curcuminoid organization. We describe the dielectric nature of our system and identify how different polymorphs can affect electronic parameters such as permittivity, all corroborated by DFT calculations., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 R&D program (ERC-724981). This work was also supported by the projects PID2019-108794GB-I00, GENESIS PID2019-111682RB-I00, PID2019-110907GB-I00, and PID2021-122464NB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. E.C.S. acknowledges the financial support from the Spanish Government, (Grant PGC2018-098630-B-I00). R.P. acknowledges support from the Ramón y Cajal Fellowship (Ref. RyC2019-028474-I). J.dS. thanks to the MChem program of the University of Southampton. E.R. thanks Generalitat de Catalunya by a ICREA Academia award, Spanish Ministry Science for a Maria de Maeztu excellence grant (MDM-2017-0767), and computer resources, technical expertise and assistance provided by the Barcelona Supercomputing Center. R.M. thanks “la Caixa” Foundation (ID 100010434) for a Junior Leader fellowship (LCF/BQ/PI22/11910024). The crystal structures were collected at beamline XALOC at ALBA Synchrotron (Exp. 2017042211). The CSIC authors acknowledge the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (FUNFUTURE,2020-2023). GIWAXS experiments were performed at the beam line BL11 – NCD-SWEET at ALBA Synchrotron with the collaboration of ALBA staff ; we also thank the support from Alba Cazorla., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental and theoretical studies of the electronic transport of an extended curcuminoid in graphene nano-junctions

  • Cardona, Teresa
  • Baum, Thomas Y.
  • Zaffino, Rossella
  • Herrera, Daniel
  • Pfattner, Raphael
  • Gómez Coca, Silvia
  • Ruiz, Eliseo
  • González Campo, Arántzazu
  • Zant, Herre S.J. van der
  • Aliaga Alcalde, Núria
Exploiting the potential of curcuminoids (CCMoids) as molecular platforms, a new 3.53 nm extended system (pyACCMoid, 2) has been designed in two steps by reacting a CCMoid with amino-terminal groups (NH2-CCMoid, 1, of 1.79 nm length) with polycyclic aromatic hydrocarbon (PAH) aldehydes. CCMoid 2 contains pyrene units at both ends as anchoring groups to optimize its trapping in graphene nano-junctions created by feedback-controlled electro-burning. The measured I-V characteristics show gate-dependent behaviour at room temperature and 10 K, with increased conductance values compared to shorter CCMoids previously reported, and in agreement with DFT calculations. Our results show that the adjusted molecular design improves the conductance, as system 2 separates the conductive backbone from the anchor groups, which tend to adopt a planar configuration upon contact with the graphene electrodes. DFT calculations using Green functions of a set of different molecular conformations of 2 on graphene electrodes show a direct relationship between the units (e.g. pyrene, amide, etc.), in the molecule, through which electrons are injected and the conductance values; where the size of the spacing between the graphene electrodes contributes but is not the dominant factor, and thus, counter-intuitively the smallest spacing gives one of the lowest conductance values., This work has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 R&D program (ERC-724981) and grant no. 863098 (SPRING). This work was also supported by the projects PID2019-108794GBI00, TED2021-129593B-I00 and PID2021-122464NB-I00 funded by MCIN/AEI/10.13039/501100011033 from the Ministerio de Ciencia e Innovación. R. P. acknowledges support from the Ramón y Cajal Fellowship (Ref. RyC2019-028474-I). E. R. thanks Generalitat de Catalunya for an ICREA Academia award and 2021-SGR-00286 grant, Spanish Ministry Science for a Maria de Maeztu excellence grant (CEX2021-001202-M), and BSC for computational resources. The CSIC authors acknowledge the financial support from the Spanish Ministry Science, through the “Severo Ochoa” Programme for Centres of Excellence (MATRANS42, CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Curcuminoid-based responsive surfaces for fluorescent BF3 detection, a fast and reversible approach

  • Gimeno-Muñoz, Raquel
  • Díaz-Torres, Raúl
  • Gómez-Coca, Silvia
  • Roubeau, Olivier
  • Díaz-Cruz, José Manuel
  • Aliaga-Alcalde, Núria
  • González-Campo, Arántzazu
The strategic design of a novel curcuminoid (CCMoid), termed PA, containing pyrene units and a terminal carboxylic group provides the necessary tools for its efficient immobilization on surfaces and its potential use as an optical chemosensor. To this end, our work provides a robust methodology for the preparation of CCMoid-based active surfaces with a fluorescent response and reusability. The covalent immobilization of the CCMoid is obtained by the reaction of the acidic groups of PA and the imidazole ends of the previously functionalized substrates. In this way, fluorescent patterned surfaces of PA, whose emission could be observed in the visible region thanks to the pyrene groups of the CCMoid, were obtained using microcontact printing. In addition, the coordination of BF3 molecules (in solution and in gas phase) with the keto-enol moiety of the PAs anchored on the surfaces has been analyzed. The ability of BF3 to modify the optical properties of the CCMoids-based surfaces, leading to emissions in the near-IR, has been identified as a fast and reversible process. Such ability is intrinsic to the final coordinated system and not to other boron-based molecules, providing unique response and sensing surfaces., This work has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 R&D program (ERC-724981). This work was also supported by the projects PID2019-108794GBI00, PID2021-122464NB-I00, PID2023-151929NB-I00 funded by MCIN/AEI/10.13039/501100011033 and Maria de Maeztu CEX2021-001202M from the Ministerio de Ciencia e Innovación. The Generalitat de Catalunya is also acknowledged for the 2021-SGR-01085, 2021-SGR-00286 and 2021SGR00006 grants. This research used resources of the Advanced Light Source, which is a DOE Office of Science User Facility under contract no. DEAC02-05CH11231. The CSIC authors acknowledge the financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001202-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interplay of manganese doping in lead-free Cs3 Bi2 Br9 nanocrystals

  • Martin, James Harry
  • Ruiz, Eliseo
  • Lezama, Luis
  • Ahmad, Shahzada
  • Kazim, Samrana
In the pursuit of inorganic lead-free halide perovskites, bismuth-based halide perovskite nanocrystals (NCs) offer a nontoxic alternative with environmental stability. However, their low photoluminescence and large band gaps make them unrealistic for optoelectronic applications. The doping with transition metal ions is attractive for optoelectronics and beyond. However, the doping with magnetic ions and the exact substituting sites remain largely unexplored. In this work, we doped Mn2+ ions into lead-free two-dimensional vacancy-ordered Cs3Bi2Br9 nanocrystals via a modified hot-injection method and deduced their impact on intrinsic structural and optoelectronic properties. The presence of Mn2+ ions is endorsed by photoluminescence and electron paramagnetic resonance (EPR) spectroscopy, while high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and energy-dispersive X-ray spectroscopy (EDS) mapping trace the atomically resolved crystal structure and chemical composition, which are validated by density functional theory (DFT) calculations. Our work substantiates the role of magnetic doping in wide band gap lead-free perovskite at the nanoscale level and opens opportunities for research in spintronics, magneto-optics, memristors, quantum computing, etc., This work received support from the Spanish Ministry of Science and Innovation ARISE (PID2019-111774RB-100/AEI/10.13039/501100011033 & INTERACTION (PID2021-129085OB-I00), PID2021-122464NB-I00, and Maria de Maeztu CEX2021-001202-M). E.R. also acknowledges the Generalitat de Catalunya for an ICREA Academia and 2021-SGR-00286 grants, and for computational resources to CSUC., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001202-M)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Curcuminoid-Based Responsive Surfaces for Fluorescent BF<sub>3</sub> Detection, a Fast and Reversible Approach

  • Gimeno-Muñoz, Raquel
  • Díaz-Torres, Raúl
  • Gómez-Coca, Silvia
  • Roubeau, Olivier
  • Díaz-Cruz, José Manuel
  • Aliaga-Alcalde, Núria
  • González-Campo, Arántzazu
The strategic design of a novel curcuminoid (CCMoid), termed PA, containing pyrene units and a terminal carboxylic group provides the necessary tools for its efficient immobilization on surfaces and its potential use as an optical chemosensor. To this end, our work provides a robust methodology for the preparation of CCMoid-based active surfaces with a fluorescent response and reusability. The covalent immobilization of the CCMoid is obtained by the reaction of the acidic groups of PA and the imidazole ends of the previously functionalized substrates. In this way, fluorescent patterned surfaces of PA, whose emission could be observed in the visible region thanks to the pyrene groups of the CCMoid, were obtained using microcontact printing. In addition, the coordination of BF3 molecules (in solution and in gas phase) with the keto–enol moiety of the PAs anchored on the surfaces has been analyzed. The ability of BF3 to modify the optical properties of the CCMoids-based surfaces, leading to emissions in the near-IR, has been identified as a fast and reversible process. Such ability is intrinsic to the final coordinated system and not to other boron-based molecules, providing unique response and sensing surfaces.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interplay of Manganese Doping in Lead-Free Cs3Bi2Br9 Nanocrystals

  • Martin, James Harry
  • Ruiz, Eliseo
  • Lezama, Luis
  • Ahmad, Shahzada
  • Kazim, Samrana
In the pursuit of inorganic lead-free halide perovskites, bismuth-based halide perovskite nanocrystals (NCs) offer a nontoxic alternative with environmental stability. However, their low photoluminescence and large band gaps make them unrealistic for optoelectronic applications. The doping with transition metal ions is attractive for optoelectronics and beyond. However, the doping with magnetic ions and the exact substituting sites remain largely unexplored. In this work, we doped Mn2+ ions into lead-free two-dimensional vacancy-ordered Cs3Bi2Br9 nanocrystals via a modified hot-injection method and deduced their impact on intrinsic structural and optoelectronic properties. The presence of Mn2+ ions is endorsed by photoluminescence and electron paramagnetic resonance (EPR) spectroscopy, while high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and energy-dispersive X-ray spectroscopy (EDS) mapping trace the atomically resolved crystal structure and chemical composition, which are validated by density functional theory (DFT) calculations. Our work substantiates the role of magnetic doping in wide band gap lead-free perovskite at the nanoscale level and opens opportunities for research in spintronics, magneto-optics, memristors, quantum computing, etc.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of highly diluted polyanionic iron(II) spin crossover systems

  • Moneo-Corcuera, Andrea
  • Nieto-Castro, David
  • Cirera, Jordi
  • Gómez, Verónica
  • Sanjosé-Orduna, Jesús
  • Casadevall, Carla
  • Molnár, Gábor
  • Bousseksou, Azzedine|||0000-0002-1619-532X
  • Parella Coll, Teodor|||0000-0002-1914-2709
  • Martínez-Agudo, José María
  • Lloret-Fillol, Julio
  • Pérez-Temprano, Mónica Helvia
  • Ruiz, Eliseo|||0000-0001-9097-8499
  • Galán-Mascarós, José Ramón|||0000-0001-7983-9762
Spin crossover (SCO) complexes, through their reversible spin transition under external stimuli, can work as switchable memory materials. Here, we present a protocol for the synthesis and characterization of a specific polyanionic iron SCO complex and its diluted systems. We describe steps for its synthesis and the determination of crystallographic structure of the SCO complex in diluted systems. We then detail a range of spectroscopic and magnetic techniques employed to monitor the spin state of the SCO complex in both diluted solid- and liquid-state systems. For complete details on the use and execution of this protocol, please refer to Galán-Mascaros et al. Publisher's note: Undertaking any experimental protocol requires adherence to local institutional guidelines for laboratory safety and ethics. Spin crossover (SCO) complexes, through their reversible spin transition under external stimuli, can work as switchable memory materials. Here, we present a protocol for the synthesis and characterization of a specific polyanionic iron SCO complex and its diluted systems. We describe steps for its synthesis and the determination of crystallographic structure of the SCO complex in diluted systems. We then detail a range of spectroscopic and magnetic techniques employed to monitor the spin state of the SCO complex in both diluted solid- and liquid-state systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Rationalizing the carborane versus phenyl-driven luminescence in related dicarboxylic ligands and their antenna effect for their Eu3+ and Tb3+ metal-organic frameworks, a combined experimental and computational study

  • Li, Zhen|||0000-0002-8497-7497
  • Roscini, Claudio|||0000-0002-0157-8934
  • Núñez, Rosario|||0000-0003-4582-5148
  • Teixidor, Francesc|||0000-0002-3010-2417
  • Viñas, Clara|||0000-0001-5000-0277
  • Ruiz, Eliseo|||0000-0001-9097-8499
  • Giner Planas, José|||0000-0002-1648-2169
Replacement of a phenyl moiety by a carborane in 1,3-di(4-carboxyphenyl) derivatives has a pronounced effect on the photophysical properties of the compounds themselves and their corresponding Eu and Tb metal organic frameworks. Herein, we demonstrate that while the luminescence of the carborane-derivative 1,7-di(4-carboxyphenyl)-1,7-dicarba-closo-dodecaborane (mCB-L) is negligible in the solid state (0.3%), the corresponding phenyl-derivative [1,1' : 3',1''-terphenyl]-4,4''-dicarboxylic] (TDCA) is highly luminescent (quantum yield of 47.8%). However, the latter one is a much worse antenna for sensitizing Eu and Tb cations than the former one. Based on our previous studies where mCB-L behaves as a good antenna for these two lanthanides, we have now comparatively studied the optical properties of mCB-L and TDCA and their efficiency as sensitizers for Eu and Tb cations, in the solid state at room temperature. STEOM-DLPNO-CCSD calculations revealed a larger energy difference between the singlet S and the lowest conical intersection (CI) points for TDCA (33.0 kcal mol) than that for mCB-L (18.4 kcal mol), explaining the observed different luminescence properties of these two compounds. Contrary to the carborane derivative, TDCA exhibits a more distorted structure at the CI point. TDCA-Eu and TDCA-Tb MOFs have been synthesized and characterized by infrared spectroscopy (IR) and powder X-ray diffraction (PXRD). The optical properties of TDCA-Eu and TDCA-Tb MOFs were investigated, and both MOFs displayed luminescence in the visible region with characteristic emission bands attributed to Eu and Tb transitions, respectively. However, the quantum yields for TDCA-Ln (Eu, 11.1%; Tb, 4.8%) were found to be much lower than those of carborane-based MOFs (Eu, 20.5%; Tb, 49.8%), indicating that the TDCA ligand is a less efficient light-absorbing sensitizer for Eu and Tb ions compared to the carborane-based ligand and may favor undesired back-energy transfer, as suggested by their faster decay times in comparison with the carborane counterparts. STEOM-DLPNO-CCSD calculations are used to analyze the changes in electron densities on photo-excitation from S to S and de-excitation from T to S, as well as the differences in the excited state energies for mCB-L, TDCA, and the hypothetical longer derivatives (mCB-L2 and QDCA). Our research, which combines experimental and computational methods, offers valuable data for optimizing the singlet and triplet energies, as well as their differences (gaps), by choosing between phenyl and carborane as the building scaffold for 1,3-di(4-carboxyphenyl) compounds. This demonstrates that using phenyl or m-carborane as the building scaffold leads to distinct luminescence properties.