Pasar al contenido principal

AJUSTE DE INTERFAZ DE CELULAS SOLARES DE PEROVSKITA A TRAVES DE MXENES

PID2021-129085OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION BCMATERIALS-BASQUE CENTER FOR MATERIALS, APPLICATIONS AND NANOSTRUCTURES

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifaceted design of surface passivator for upgraded charge extraction in perovskite solar cells

  • Gassara, Mahdi
  • Kazim, Samrana
  • Ahmad, Shahzada
The nonradiative recombination arising from the interfaces of perovskite solar cells (PSCs) pose a hurdle, impacting both the efficiency and stability of devices. Functionalized organic molecules can passivate the perovskite surface to suppress the defects and can also fine-tune the microstructure. This in turn promotes reliability and performance enhancement in solar cells. Using a design protocol, cyanoguanidine diiodide is synthesized and employed as a surface passivator for the fabrication of PSCs, and boosted performance from 20.44% to 23.04% is achieved. This improvement stems from an improved fill factor reaching up to 80.64%, together with the open-circuit voltage (Voc) measuring 1119 mV. The steady-state photoluminescence and microstructure of passivated perovskites display significant surface modification of the perovskite film which favorably impacts the charge carrier transfer at the interface of perovskite and Spiro-OMeTAD. Our findings suggest that improved solar cell performance is due to the synergetic effect of amino and cyano functional groups along with the iodide reservoir in the organic passivator., This work received funding from the European Union H2020 program under a European Research Council Consolidator grant (MOLEMAT, 726360). Support from the Spanish Ministry of Science and Innovation (PID2019-111774RB-100/AEI/10.13039/501100011033 and INTERACTION (PID2021-129085OB-I00)) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical constants manipulation of formamidinium lead iodide perovskites: ellipsometric and spectroscopic twigging

  • Khan, Mohd Taukeer
  • Haris, Muhammed P. U.
  • Alhouri, Baraa
  • Kazim, Samrana
  • Ahmad, Shahzada
Unraveling the knowledge of the complex refractive index and photophysical properties of the perovskite layer is paramount to uncovering the physical process that occurs in a perovskite solar cell under illumination. Herein, we probed the optical and photophysical properties of FAPbI3 (FAPI) and Cs0.1FA0.9PbI3 (CsFAPI) thin films deposited from pre-synthesized powder, by the spectroscopic ellipsometer and time-resolved fluorescence spectra. We determined the complex refractive index of perovskite films by fitting the measured spectroscopic ellipsometer data with the three-oscillator Tauc–Lorentz (T–L) model. We deduced that the CsFAPI thin film had a slightly lower absorption coefficient than the FAPI, but a higher refractive index and dielectric constant than the FAPI. The peak photoluminescence (PL) emission of FAPI and CsFAPI thin film on glass substrates was observed around 803 nm and 799 nm, respectively, while on ITO substrates, both FAPI and CsFAPI thin film was quenched and red-shifted to 816 nm. The methylammonium free pure CsFAPI-based perovskite solar cell fabricated in p–i–n configuration, measured a competitive efficiency of 16.14%, characterized by a JSC of 23.995 mA cm−2, VOC of 912 mV, and FF of 73.74%., This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360]. Support from the Spanish Ministry of Science and Innovation (PID2019-111774RB-100/AEI/10.13039/501100011033 and INTERACTION {PID2021-129085OB-I00}) is also acknowledged. MTK extend their sincere gratitude to the Deanship of Scientific Research at the Islamic University of Madinah for financially supporting this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dopant-free tert-butyl Zn(II) phthalocyanines: the impact of substitution on their photophysical properties and their role in perovskite solar cells

  • Gassara, Mahdi
  • Garcés-Garcés, José
  • Lezama, Luis
  • Ortiz, Javier
  • Fernández-Lázaro, Fernando
  • Kazim, Samrana
  • Sastre-Santos, Ángela
  • Ahmad, Shahzada
We synthesized molecular hole-transporting materials (HTMs) featuring a zinc phthalocyanine (ZnPc) central core and modulated the non-peripheral position with different numbers of tert-butyl groups. The synthesized molecules were then integrated into the fabrication of perovskite solar cells to evaluate their efficacy. We studied four different undoped ZnPcs with four (ZnPc 1), three (ZnPc 2), two (ZnPc 3), and one (ZnPc 4) tert-butyl group as hole transport materials in the n–i–p configuration. Among them, ZnPc 1 registered the best power conversion efficiency of 15.50%, an open-circuit voltage (Voc) of 932.9 mV, a short-circuit current density (Jsc) of 24.26 mA cm−2, and a fill factor (FF) of 68.46%. This was followed by ZnPc 2 which achieved a modest 7.98% performance. The surface microstructure is greatly influenced by the type of molecule and it evolves from a compact granular to a fibrillar structure. Furthermore, the devices with ZnPc 1 showed enhanced stability under an ambient atmosphere comparable to Spiro-OMeTAD., This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360]. Support from the Spanish Ministry of Science and Innovation INTERACTION ({PID2021-129085OB-I00}) is also acknowledged. The authors would like to thank the European Regional Development Fund “A Way to Make Europe” and the Spanish Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación (PID2020-117855 RB-I00 to Á. S.-S.) and the Generalitat Valenciana (CIPROM/2021/059 and MFA/2022/028 to Á. S.-S.) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating buried interface to achieve an ultra-high open circuit voltage in triple cation perovskite solar cells

  • Huang, Junyi
  • Zhang, Zhiguo
  • Zhu, Yanbin
  • Yu, Haixuan
  • Li, Xiongjie
  • Liu, Zhirong
  • Kazim, Samrana
  • Hu, Yong
  • Yang, Wanpeng
  • Ma, Xiaoting
  • Dai, Letian
  • Ahmad, Shahzada
  • Shen, Yan
  • Wang, Mingkui
This work proposes a methodology to increase the open-circuit voltage of perovskite solar cells via modulating the buried interface using π-conjugated molecules, featuring a push-pull electronic structure configuration. In the planar perovskite solar cells using tin oxide nanocrystal as an electron transport layer, the 2-methyl-1-aminobenzene derivatives with 4-(Heptafluoropropan)-2-methylaniline notable not only reduce the interfacial energy barrier but also passivate the defects at the buried interface. This modulation enhances the open circuit voltage of Cs0.05(FA0.85MA0.15)0.95Pb(I0.85Br0.15)3 (bandgap ≈1.60 eV) perovskite solar cell to a high value of 1.241 V and thus the power conversion efficiency to 24.16% under standard testing condition. An even higher efficiency of 25.11% can be achieved when employing in the Cs0.05MA0.05FA0.9PbI3 (bandgap ≈1.54 eV) perovskite solar cell. The open circuit voltage (1.241 V) is among the highest in triple-cation perovskite solar cells which reaches 95% Shockley–Queisser limit. A solar-to-CO conversion efficiency of 11.76% can be achieved in the fabricated perovskite solar minimodule driven carbon dioxide electrolyzer. This demonstrates the potential of utilizing perovskite solar cells for CO2 conversion as a clean and green energy environment., This work was financially supported by the National Key Research and Development Program of China (Grant No. 2022YFB4200305), the National Natural Science Foundation of China (Grant No. 22379049), the Department of Science and Technology of Hubei Province (Grant No. 2022EHB009), the Innovation Project of Optics Valley Laboratory (Grant No. OVL2023PY004), the China Postdoctoral Science Foundation (Grant No. 2022M711236), and Wuhan East Lake High-tech Development Zone (No. 2023KJB232). Support from the Spanish Ministry of Science and Innovation INTERACTION (PID2021-129085OB-I00) is also acknowledged. We thank engineer Jun Su in the Center of Optoelectronic Micro&Nano Fabrication and Characterizing Facility, WNLO of HUST for the support in the SEM and TEM tests. The authors thank the Analytical and Testing Centre of HUST and the Nano-devices and Characterization Centre of WNLO-HUST for the measurements of samples. We thank Prof. Fei Wu of HUST for providing a super-computer for DFT calculation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MXene-based energy devices: From progressive to prospective

  • Kazim, Samrana
  • Huang, Chun
Every once in a while, a revolutionary technological development arises, which leads to a significant change in the way to approach research and push development efforts. The appetite for new technology compels society to look for game-changing materials, that can transform the industry and make advances. Sustainable energy production is paramount to addressing the climate crisis, and energy generation and storage play an important role in the development of self-powered microelectronic devices. The 2D materials, MXenes have emerged as promising candidates for energy and other applications owing to their inherent electrical merits, high specific surface area, and tunable properties. Particularly, in the context of additive and interfacial materials for perovskite solar cell fabrication and utilization as additives in secondary batteries, this review delves into the application of MXenes in such devices. The protocols of MXenes and their nanostructures tailoring toward such applications and, the underlying mechanism is uncovered. Further, the existing challenges and direction for future in MXene-based energy harvesters are discussed., This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360]. Support from the Spanish Ministry of Science and Innovation (PID2019-111774RB-100/AEI/10.13039/501100011033 and INTERACTION {PID2021-129085OB-I00}) and ENSOL3 is also acknowledged. Grant Reference CNS2022-136171 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” is also acknowledged. Funding from the ERC Starting Grant (converted to UKRI funding EP/Y009908/1), the Faraday Institution research programme grants FIRG060 and FIRG066, the Faraday Institution Industry Fellowship FIIF015, and Imperial College London UKRI Impact Acceleration Account EP/X52556X/1 is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Peptide-perovskite based bio-inspired materials for optoelectronics applications

  • Kazim, Samrana
  • Haris, Muhammed P. U.
  • Ahmad, Shahzada
The growing demand for environmentally friendly semiconductors that can be tailored and developed easily is compelling researchers and technologists to design inherently bio-compatible, self-assembling nanostructures with tunable semiconducting characteristics. Peptide-based bioinspired materials exhibit a variety of supramolecular morphologies and have the potential to function as organic semiconductors. Such biologically or naturally derived peptides with intrinsic semiconducting characteristics create new opportunities for sustainable biomolecule-based optoelectronics devices. Affably, halide perovskite nanocrystals are emerging as potentially attractive nano-electronic analogs, in this vein creating synergies and probing peptide-perovskite-based bio-electronics are of paramount interest. The physical properties and inherent aromatic short-peptide assemblies that can stabilize, and passivate the defects at surfaces assist in improving the charge transport in halide perovskite devices. This review sheds light on how these peptide-perovskite nano-assemblies can be developed for optical sensing, optoelectronics, and imaging for biomedical and healthcare applications. The charge transfer mechanism in peptides along with as an outlook the electron transfer mechanism between perovskite and short peptide chains, which is paramount to facilitate their entry into molecular electronics is discussed. Future aspects, prevailing challenges, and research directions in the field of perovskite-peptides are also presented., S.A. acknowledges the funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360]. SA and SK thank from INTERACTION (PID2021-129085OB-I00) and ARISE (PID2019-111774RB-100), from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Uncovering the nanoscopic humidity igression in multifunctional addivated halide perovskites

  • Kazim, Samrana
  • Huang, Junyi
  • Haris, Muhammed P. U.
  • Li, Xiongjie
  • Shi, Xiaotang
  • Zhang, Zhiguo
  • Berger, Rüdiger
  • Buffeteau, Thierry
  • Bassani, Dario M.
  • Wang, Mingkui
  • Ahmad, Shahzada
Sulfur-based multifunctional additives are attractive for increasing not only the device power conversion efficiency but also the moisture stability of perovskite solar cells. The stability of the device against external and internal stress plays a pivotal role in the commercial endeavor of emerging technologies such as perovskite photovoltaics. However, the potential of sulfur-based additives remains largely unexplored for perovskite solar cell fabrication. Here, a mechanism is deduced for the local nanoscopic humidity ingression into a multifunctional additiviated formamidinium-loaded halide perovskites. By tuning the iodide and bromide tails of the additives, the influence of sulfur heteroatom containing ammonium-amidinium salts on the photo-physical and device properties of a formamidinium-rich perovskite absorber is uncovered. In addition, the process of strong water adsorption is excluded through the proton-migration mechanism, thereby significantly improving the moisture resistance of perovskite films. The high crystallinity and long lifetime decay allow a higher PCE of 25.14% to be achieved compared to the control at 22.49%, along with improved long-term stability by retaining 99.6% of the initial PCE after 1000 h., This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360], the National Science Foundation of China (Grant No. 22379049), the China Postdoctoral Science Foundation (Grant No. 2022M711236). Support from the Spanish Ministry of Science and Innovation INTERACTION {PID2021-129085OB-I00}) as well as by the French ANR (ANR-18-CE05-0021-01) and the Region Nouvelle Aquitaine (STRIPE project no. 2019-1R1M08) is also acknowledged. X.S. acknowledges support by the CSC (contract 202204910093). The authors acknowledge Franjo Weber for the support in performing KPFM measurements. The authors would like to thank SGIker facilities of the University of Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of spiro-substituted phthalocyanine hole-selective layers for perovskite solar cells

  • Gassara, Mahdi
  • Ferrer, Lydia
  • Lezama, Luis
  • Molina, Desiré
  • Ortiz, Javier
  • Kazim, Samrana
  • Sastre-Santos, Ángela
  • Ahmad, Shahzada
The data that support the findings of this study are available from the corresponding author upon reasonable request., The design and development of hole-selective layers remain strategic for enhancing the performance and reliability of perovskite solar cells. We introduce phthalocyanines annelated with Spiro-core substituent at the β position as a molecular semiconductor to be employed as hole-selective layers. The placement of the Spiro unit improves the molecular packing, film uniformity, and energy level alignment, enhancing the hole extraction ability of the phthalocyanine and suppressing charge recombination at the perovskite/ hole-selective layer interface. Our findings highlight the symbiotic benefits of zinc phthalocyanine with Spiro substitution to deliver a power conversion efficiency of 18.91%, approaching the performance of Spiro-OMeTAD-based devices. This work opens the path of an innovative molecular design strategy and its potential with further optimization of the newly developed Spiro substitution in zinc phthalocyanines in perovskite solar cells., This work received support from the Spanish Ministry of Science and Innovation INTERACTION {PID2021-129085OB-I00} and A.S.-S. thank the European Regional Development Fund “A Way to Make Europe” and the Spanish Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación (PID2024-155430OB-I00) and the Generalitat Valenciana (CIPROM/2021/059 and MFA/2022/028) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interplay of manganese doping in lead-free Cs3 Bi2 Br9 nanocrystals

  • Martin, James Harry
  • Ruiz, Eliseo
  • Lezama, Luis
  • Ahmad, Shahzada
  • Kazim, Samrana
In the pursuit of inorganic lead-free halide perovskites, bismuth-based halide perovskite nanocrystals (NCs) offer a nontoxic alternative with environmental stability. However, their low photoluminescence and large band gaps make them unrealistic for optoelectronic applications. The doping with transition metal ions is attractive for optoelectronics and beyond. However, the doping with magnetic ions and the exact substituting sites remain largely unexplored. In this work, we doped Mn2+ ions into lead-free two-dimensional vacancy-ordered Cs3Bi2Br9 nanocrystals via a modified hot-injection method and deduced their impact on intrinsic structural and optoelectronic properties. The presence of Mn2+ ions is endorsed by photoluminescence and electron paramagnetic resonance (EPR) spectroscopy, while high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and energy-dispersive X-ray spectroscopy (EDS) mapping trace the atomically resolved crystal structure and chemical composition, which are validated by density functional theory (DFT) calculations. Our work substantiates the role of magnetic doping in wide band gap lead-free perovskite at the nanoscale level and opens opportunities for research in spintronics, magneto-optics, memristors, quantum computing, etc., This work received support from the Spanish Ministry of Science and Innovation ARISE (PID2019-111774RB-100/AEI/10.13039/501100011033 & INTERACTION (PID2021-129085OB-I00), PID2021-122464NB-I00, and Maria de Maeztu CEX2021-001202-M). E.R. also acknowledges the Generalitat de Catalunya for an ICREA Academia and 2021-SGR-00286 grants, and for computational resources to CSUC., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001202-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Powder methodology—An effective way to suppress Sn2+ oxidation in narrow bandgap Pb-Sn Perovskite

  • Gassara, Mahdi
  • Yu, Haixuan
  • Kulkarni, Ashish
  • Wang, Mingkui
  • Kazim, Samrana
  • Ahmad, Shahzada
Lead–tin halide perovskites are of significant merits due to their suitability for tandem solar cell fabrication and for lowering the environmental impact. However, the substantial disparity in the crystallization of tin- and lead-based perovskites, coupled with the tendency of Sn2+ to oxidize rapidly, poses hurdles and rise in defect concentration. Here, the study proposes a cost-effective and facile route to synthesize lead–tin halide perovskite microcrystals. The perovskite formulation and the thin films deposited from lead–tin halide perovskite microcrystal exhibit an improved stability of Sn2+ against environmental humidity conditions compared to their precursor-based counterparts. The device fabricated with FAPb0.5Sn0.5I3 microcrystal measures a power conversion efficiency of 18.55% with an open-circuit voltage of 800 mV, coupled with low-cost precursors and lead mitigation protocols., This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360], and the National Natural Science Foundation of China (No. 21975088). Support from the Spanish Ministry of Science and Innovation (PID2019-111774RB-100/AEI/10.13039/501100011033 and INTERACTION (PID2021-129085OB-I00)) is acknowledged. A.K. acknowledges funding from DAAD – Deutscher Akademischer Austauschdienst through DAAD PRIME Fellowship., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Environmental Benign Cl‐Terminated MXene For Buried Interface Engineering in Perovskite Solar Modules

  • Gassara, Mahdi
  • Huang, Junyi
  • Das, Dimitra
  • Kazim, Samrana
  • Wang, Mingkui
  • Ahmad, Shahzada
Buried interface is imperative to boost charge carrier extraction and optimize interfacial electronic properties in devices, including perovskite solar cells. Cl-terminated MXene (Ti3C2Clx) is designed and developed via a hydrofluoric acid-free, environmentally friendly Lewis acid molten salt (LAMS) methodology, and placed it as a buried interfacial layer between the SnO2 and the perovskite. The formulated MXene forms a stable colloidal suspension in N, N′-dimethylpropyleneurea. The Cl terminations available on the MXene surface effectively passivate oxygen vacancy-related defects in the SnO2 layer, which advances the interfacial electronic properties. Ti3C2Clx as an interlayer facilitates effective charge transport, promotes crystallinity in perovskite, and lowers defect densities. The MXene-adjusted perovskite solar cells measured a record PCE of 25.75%, with modules reaching 21.88%, besides excellent stability. After 1200 h, the fabricated solar cells retained 95.5% of their initial performance, compared to 76.9% for control devices, endorsing MXene's effectiveness in suppressing interfacial degradation and pushing device longevity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interplay of Manganese Doping in Lead-Free Cs3Bi2Br9 Nanocrystals

  • Martin, James Harry
  • Ruiz, Eliseo
  • Lezama, Luis
  • Ahmad, Shahzada
  • Kazim, Samrana
In the pursuit of inorganic lead-free halide perovskites, bismuth-based halide perovskite nanocrystals (NCs) offer a nontoxic alternative with environmental stability. However, their low photoluminescence and large band gaps make them unrealistic for optoelectronic applications. The doping with transition metal ions is attractive for optoelectronics and beyond. However, the doping with magnetic ions and the exact substituting sites remain largely unexplored. In this work, we doped Mn2+ ions into lead-free two-dimensional vacancy-ordered Cs3Bi2Br9 nanocrystals via a modified hot-injection method and deduced their impact on intrinsic structural and optoelectronic properties. The presence of Mn2+ ions is endorsed by photoluminescence and electron paramagnetic resonance (EPR) spectroscopy, while high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and energy-dispersive X-ray spectroscopy (EDS) mapping trace the atomically resolved crystal structure and chemical composition, which are validated by density functional theory (DFT) calculations. Our work substantiates the role of magnetic doping in wide band gap lead-free perovskite at the nanoscale level and opens opportunities for research in spintronics, magneto-optics, memristors, quantum computing, etc.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Decoding Fluorine Peripheral Substitution Impact in Zinc Phthalocyanines for Perovskite Solar Cells

  • Singh, Son
  • Hernández, Adrián
  • Ortiz, Javier
  • Kazim, Samrana
  • Lezama, Luis
  • Ruiz, Eliseo
  • Sastre-Santos, Ángela
  • Ahmad, Shahzada
We designed six zinc phthalocyanine derivatives (ZnPc-1-ZnPc-6) as molecular semiconductors. By adjusting peripheral substituents with differing electron-donating and -withdrawing properties (-C(CH3)3, -O(CH2)CF3, -CF3), we rationalized solubility, energy levels, and molecular arrangement to influence interfacial charge dynamics and thus device performance. Among the derivatives, ZnPc-2 with three tert-butyl groups and a trifluoroethoxy provides favorable energy level alignment, better thin film coverage, and high conductivity suited to be used as hole-selective materials. When integrated into n-i-p architecture perovskite solar cells, it measures a power conversion efficiency approaches that of Spiro-OMeTAD under our lab conditions. ZnPc-2 showed ambient operational stability, maintaining around 80% of its initial J MPP over 24 h without encapsulation. Our combined theoretical and experimental assessment revealed detailed electro-optical properties to substantiate the influence of molecule design on the device performance. Specifically, three tert-butyl groups with a trifluoroethoxy arm outperform, evidencing molecular design as a strategy to modulate properties.