Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Tailoring of a Phenothiazine Core for Electrical Conductivity and Thermal Stability: Hole-Selective Layers in Perovskite Solar Cells

  • Peng, Huang
  • Manju
  • Kazim, Samrana
  • Misra, Rajneesh
  • Lezama Diago, Luis María
  • Ahmad, Shahzada
Hole-selective layers are an indispensable component for the fabrication of effective perovskite solar cells. We designed and developed two phenothiazine-based hole transport materials: PTADAnCBZ with an electron-donating sulfur atom and PTODAnCBZ with an electron-withdrawing sulfone group in the core. PTODAnCBZ in contrast to PTADAnCBZ possesses a unique molecular orbital distribution and lower dihedral angles, which endowed it with excellent optoelectrical properties, improved charge transportation, and thermal stability. The solar cells fabricated with PTODAnCBZ yielded a higher photovoltaic (PV) performance as compared to PTADAnCBZ and were on par in terms of performance with those fabricated with Spiro-OMeTAD. Notably, the phenothiazine-based PV devices showed improved stability under multi-stress conditions including moisture, moisture and light, and moisture and heat. Phenothiazine-based molecules showed unparalleled thermal stability as compared to the doped Spiro-OMeTAD. Our findings pinpoint the advantages of cost-effective phenothiazine with dioxide as hole-selective layers and suggest its application in a variety of optoelectrical devices such as PVs and organic LED., This work received funding from the European Union H2020 Programme under the European Research Council Consolidator grant [MOLEMAT, 726360]. This work was supported by the DST, (DST/TMD/SERI/D05(C)), INSA (SP/YSP/139/2017/2293), SERB CRG/2018/000032, and CSIR 01(2934)/18/EMR-II.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Advanced Research Trends in Dye-Sensitized Solar Cells

  • Kokkonen, Mikko
  • Talebi, Parisa
  • Zhou, Jin
  • Asgari, Somayyeh
  • Soomro, Sohail Ahmed
  • Elsehrawy, Farid
  • Halme, Janne
  • Ahmad, Shahzada
  • Hagfeldt, Anders
  • Hashmi, Syed Ghufran
Dye-sensitized solar cells (DSSCs) are an efficient photovoltaic technology for powering electronic applications such as wireless sensors with indoor light. Their low cost and abundant materials, as well as their capability to be manufactured as thin and light-weight flexible solar modules highlight their potential for economic indoor photovoltaics. However, their fabrication methods must be scaled to industrial manufacturing with high photovoltaic efficiency and performance stability under typical indoor conditions. This paper reviews the recent progress in DSSC research towards this goal through the development of new device structures, alternative redox shuttles, solid-state hole conductors, TiO2 photoelectrodes, catalyst materials, and sealing techniques. We discuss how each functional component of a DSSC has been improved with these new materials and fabrication techniques. In addition, we propose a scalable cell fabrication process that integrates these developments to a new monolithic cell design based on several features including inkjet and screen printing of the dye, a solid state hole conductor, PEDOT contact, compact TiO2, mesoporous TiO2, carbon nanotubes counter electrode, epoxy encapsulation layers and silver conductors. Finally, we discuss the need to design new stability testing protocols to assess the probable deployment of DSSCs in portable electronics and internet-of-things devices., The course funding (Dye-sensitized solar cells: Fundamentals, Device Characterizations and Applications: https://www.oulu.fi/infotech/node/204652) from UniOGS is acknowledged. Ghufran Hashmi is grateful to Jane and Aatos Erkko Foundation and Technology Industries of Finland for CAPRINT project funding (Decision# 2430354811). Mikko Kokkonen and Sohail Soomro are grateful to have funding from Academy of Finland 6Genesis Flagship (grant no. 318927). Shahzada Ahmad acknowledges the funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360].
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Protocol for Deciphering the Electrical Parameters of Perovskite Solar Cells Using Immittance Spectroscopy

  • Khan, Mohd Taukeer
  • Huang, Peng
  • Almohammedi, Abdullah
  • Kazim, Samrana
  • Ahmad, Shahzada
Here, we present a protocol for the fabrication of inverted (p-i-n)-type perovskite solar cells, unraveling its electrical merits via immittance spectroscopy. The immittance spectroscopy is a prevailing technique for both qualitative and quantitative analyses of charge carrier dynamics in working devices. This technique integrates the temperature-dependent capacitance–frequency (C-f) spectra, impedance spectra, and Mott-Schottky analyses. This protocol is also applicable for typical (n-i-p) perovskite solar cells and other multilayer semiconductor devices., This work has received funding from the European Union H2020 Programme under the European Research Council Consolidator grant (MOLEMAT, 726360). Support from PARASOL (RTI2018-102292-B-I00), Spanish Ministry of Science and Innovation, is also acknowledged. P.H. acknowledges funding from the European Commission via a Marie-Skłodowska-Curie individual fellowship (SMILIES, No. 896211). Authors are also thankful to the deanship of scientific research at Islamic University of Madinah, Saudi Arabia, for the financial support to this work through the Tamayyuz programme of the academic year 1441/1442 H (project No: 497).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dibenzo-tetraphenyl diindeno perylene as hole transport layer for high-bandgap perovskite solar cells

  • Pegu, Meenakshi
  • Calió, Laura
  • Ahmadpour, Mehrad
  • Rubahn, Horst-Günter
  • Kazim, Samrana
  • Madsen, Morten
  • Ahmad, Shahzada
Semi-transparent perovskite solar cells have the competitive edge of being employed for building integrated photovoltaics due to their esthetic benefits as light harvesting windows/facades. Perovskites have received considerable attention in recent years as a thin film photovoltaic alternative, that can also be tweaked for its transparency, evolving from potentially high bandgaps that are suited for semi-transparent solar cell fabrication. Due to the existing trade of between the efficiency and transparency of a perovskite solar cell, tuning the band gap can address this by making a bridge between the aforementioned parameters. We report our findings on the use of a wide-bandgap perovskite MAPbBr3, with a rational energetic level hole transport materials based on polycyclic aromatic hydrocarbon molecules that can be a promising alternative class of p-type material. In the present work, DBP (Dibenzo{[f,f′]-4,4′,7,7′-tetraphenyl}diindeno[1,2,3-cd :1′,2′,3′-lm]perylene was evaluated with high bandgap as well as with mixed (FAPbI3)0.85(MAPbBr3)0.15 perovskites for the fabrication of solar cell. DBP-based solar cells yielded competitive power conversion efficiencies as compared with classical HTMs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular Interface Engineering via Triazatruxene-Based Moieties/NiOx as Hole-Selective Bilayers in Perovskite Solar Cells for Reliability

  • Hemasiri, N. H.
  • Calió, Laura
  • Pegu, Meenakshi
  • Kazim, Samrana
  • Ahmad, Shahzada
Interface engineering is an effective approach to decrease nonradiative recombination and the energy barrier at the perovskite/hole transporting layer (HTL) interfaces. To overcome such limitations, an organic semiconductor (DTT-EHDI 2) is proposed, which is, composed of dithienothiophene (DTT) as the core and a planar triazatruxene incorporating an alkyl chain as the side group. This is noted to be an effective interfacial layer for inverted planar perovskite solar cells (PSCs). The altered interface effectively minimizes the detrimental charge recombination and tailors the photoinduced charge transfer dynamics at the interface of the inorganic HTL/perovskite. The π-conjugation in DTT-EHDI 2 induces high hole mobility and electrical conductivity via electron-donating properties and strong π–π intermolecular interaction. The synergetic approach leads to a substantial performance enhancement in dopant-free DTT-EHDI 2-based inverted planar PSCs, achieving 18.15% power conversion efficiency with negligible hysteresis effect. The present approach provides an effective direction of the cost-effective thiophene derivative as an interfacial agent to escalate the optoelectronic performances in photovoltaics. © 2022 Wiley-VCH GmbH, This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant (MOLEMAT, 726360) and PARASOL (RTI2018-102292-B-I00) and ARISE (PID2019-111774RB-100) from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifaceted design of surface passivator for upgraded charge extraction in perovskite solar cells

  • Gassara, Mahdi
  • Kazim, Samrana
  • Ahmad, Shahzada
The nonradiative recombination arising from the interfaces of perovskite solar cells (PSCs) pose a hurdle, impacting both the efficiency and stability of devices. Functionalized organic molecules can passivate the perovskite surface to suppress the defects and can also fine-tune the microstructure. This in turn promotes reliability and performance enhancement in solar cells. Using a design protocol, cyanoguanidine diiodide is synthesized and employed as a surface passivator for the fabrication of PSCs, and boosted performance from 20.44% to 23.04% is achieved. This improvement stems from an improved fill factor reaching up to 80.64%, together with the open-circuit voltage (Voc) measuring 1119 mV. The steady-state photoluminescence and microstructure of passivated perovskites display significant surface modification of the perovskite film which favorably impacts the charge carrier transfer at the interface of perovskite and Spiro-OMeTAD. Our findings suggest that improved solar cell performance is due to the synergetic effect of amino and cyano functional groups along with the iodide reservoir in the organic passivator., This work received funding from the European Union H2020 program under a European Research Council Consolidator grant (MOLEMAT, 726360). Support from the Spanish Ministry of Science and Innovation (PID2019-111774RB-100/AEI/10.13039/501100011033 and INTERACTION (PID2021-129085OB-I00)) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical constants manipulation of formamidinium lead iodide perovskites: ellipsometric and spectroscopic twigging

  • Khan, Mohd Taukeer
  • Haris, Muhammed P. U.
  • Alhouri, Baraa
  • Kazim, Samrana
  • Ahmad, Shahzada
Unraveling the knowledge of the complex refractive index and photophysical properties of the perovskite layer is paramount to uncovering the physical process that occurs in a perovskite solar cell under illumination. Herein, we probed the optical and photophysical properties of FAPbI3 (FAPI) and Cs0.1FA0.9PbI3 (CsFAPI) thin films deposited from pre-synthesized powder, by the spectroscopic ellipsometer and time-resolved fluorescence spectra. We determined the complex refractive index of perovskite films by fitting the measured spectroscopic ellipsometer data with the three-oscillator Tauc–Lorentz (T–L) model. We deduced that the CsFAPI thin film had a slightly lower absorption coefficient than the FAPI, but a higher refractive index and dielectric constant than the FAPI. The peak photoluminescence (PL) emission of FAPI and CsFAPI thin film on glass substrates was observed around 803 nm and 799 nm, respectively, while on ITO substrates, both FAPI and CsFAPI thin film was quenched and red-shifted to 816 nm. The methylammonium free pure CsFAPI-based perovskite solar cell fabricated in p–i–n configuration, measured a competitive efficiency of 16.14%, characterized by a JSC of 23.995 mA cm−2, VOC of 912 mV, and FF of 73.74%., This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360]. Support from the Spanish Ministry of Science and Innovation (PID2019-111774RB-100/AEI/10.13039/501100011033 and INTERACTION {PID2021-129085OB-I00}) is also acknowledged. MTK extend their sincere gratitude to the Deanship of Scientific Research at the Islamic University of Madinah for financially supporting this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dopant-free tert-butyl Zn(II) phthalocyanines: the impact of substitution on their photophysical properties and their role in perovskite solar cells

  • Gassara, Mahdi
  • Garcés-Garcés, José
  • Lezama, Luis
  • Ortiz, Javier
  • Fernández-Lázaro, Fernando
  • Kazim, Samrana
  • Sastre-Santos, Ángela
  • Ahmad, Shahzada
We synthesized molecular hole-transporting materials (HTMs) featuring a zinc phthalocyanine (ZnPc) central core and modulated the non-peripheral position with different numbers of tert-butyl groups. The synthesized molecules were then integrated into the fabrication of perovskite solar cells to evaluate their efficacy. We studied four different undoped ZnPcs with four (ZnPc 1), three (ZnPc 2), two (ZnPc 3), and one (ZnPc 4) tert-butyl group as hole transport materials in the n–i–p configuration. Among them, ZnPc 1 registered the best power conversion efficiency of 15.50%, an open-circuit voltage (Voc) of 932.9 mV, a short-circuit current density (Jsc) of 24.26 mA cm−2, and a fill factor (FF) of 68.46%. This was followed by ZnPc 2 which achieved a modest 7.98% performance. The surface microstructure is greatly influenced by the type of molecule and it evolves from a compact granular to a fibrillar structure. Furthermore, the devices with ZnPc 1 showed enhanced stability under an ambient atmosphere comparable to Spiro-OMeTAD., This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360]. Support from the Spanish Ministry of Science and Innovation INTERACTION ({PID2021-129085OB-I00}) is also acknowledged. The authors would like to thank the European Regional Development Fund “A Way to Make Europe” and the Spanish Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación (PID2020-117855 RB-I00 to Á. S.-S.) and the Generalitat Valenciana (CIPROM/2021/059 and MFA/2022/028 to Á. S.-S.) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MXene-based energy devices: From progressive to prospective

  • Kazim, Samrana
  • Huang, Chun
Every once in a while, a revolutionary technological development arises, which leads to a significant change in the way to approach research and push development efforts. The appetite for new technology compels society to look for game-changing materials, that can transform the industry and make advances. Sustainable energy production is paramount to addressing the climate crisis, and energy generation and storage play an important role in the development of self-powered microelectronic devices. The 2D materials, MXenes have emerged as promising candidates for energy and other applications owing to their inherent electrical merits, high specific surface area, and tunable properties. Particularly, in the context of additive and interfacial materials for perovskite solar cell fabrication and utilization as additives in secondary batteries, this review delves into the application of MXenes in such devices. The protocols of MXenes and their nanostructures tailoring toward such applications and, the underlying mechanism is uncovered. Further, the existing challenges and direction for future in MXene-based energy harvesters are discussed., This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360]. Support from the Spanish Ministry of Science and Innovation (PID2019-111774RB-100/AEI/10.13039/501100011033 and INTERACTION {PID2021-129085OB-I00}) and ENSOL3 is also acknowledged. Grant Reference CNS2022-136171 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” is also acknowledged. Funding from the ERC Starting Grant (converted to UKRI funding EP/Y009908/1), the Faraday Institution research programme grants FIRG060 and FIRG066, the Faraday Institution Industry Fellowship FIIF015, and Imperial College London UKRI Impact Acceleration Account EP/X52556X/1 is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Peptide-perovskite based bio-inspired materials for optoelectronics applications

  • Kazim, Samrana
  • Haris, Muhammed P. U.
  • Ahmad, Shahzada
The growing demand for environmentally friendly semiconductors that can be tailored and developed easily is compelling researchers and technologists to design inherently bio-compatible, self-assembling nanostructures with tunable semiconducting characteristics. Peptide-based bioinspired materials exhibit a variety of supramolecular morphologies and have the potential to function as organic semiconductors. Such biologically or naturally derived peptides with intrinsic semiconducting characteristics create new opportunities for sustainable biomolecule-based optoelectronics devices. Affably, halide perovskite nanocrystals are emerging as potentially attractive nano-electronic analogs, in this vein creating synergies and probing peptide-perovskite-based bio-electronics are of paramount interest. The physical properties and inherent aromatic short-peptide assemblies that can stabilize, and passivate the defects at surfaces assist in improving the charge transport in halide perovskite devices. This review sheds light on how these peptide-perovskite nano-assemblies can be developed for optical sensing, optoelectronics, and imaging for biomedical and healthcare applications. The charge transfer mechanism in peptides along with as an outlook the electron transfer mechanism between perovskite and short peptide chains, which is paramount to facilitate their entry into molecular electronics is discussed. Future aspects, prevailing challenges, and research directions in the field of perovskite-peptides are also presented., S.A. acknowledges the funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360]. SA and SK thank from INTERACTION (PID2021-129085OB-I00) and ARISE (PID2019-111774RB-100), from the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Uncovering the nanoscopic humidity igression in multifunctional addivated halide perovskites

  • Kazim, Samrana
  • Huang, Junyi
  • Haris, Muhammed P. U.
  • Li, Xiongjie
  • Shi, Xiaotang
  • Zhang, Zhiguo
  • Berger, Rüdiger
  • Buffeteau, Thierry
  • Bassani, Dario M.
  • Wang, Mingkui
  • Ahmad, Shahzada
Sulfur-based multifunctional additives are attractive for increasing not only the device power conversion efficiency but also the moisture stability of perovskite solar cells. The stability of the device against external and internal stress plays a pivotal role in the commercial endeavor of emerging technologies such as perovskite photovoltaics. However, the potential of sulfur-based additives remains largely unexplored for perovskite solar cell fabrication. Here, a mechanism is deduced for the local nanoscopic humidity ingression into a multifunctional additiviated formamidinium-loaded halide perovskites. By tuning the iodide and bromide tails of the additives, the influence of sulfur heteroatom containing ammonium-amidinium salts on the photo-physical and device properties of a formamidinium-rich perovskite absorber is uncovered. In addition, the process of strong water adsorption is excluded through the proton-migration mechanism, thereby significantly improving the moisture resistance of perovskite films. The high crystallinity and long lifetime decay allow a higher PCE of 25.14% to be achieved compared to the control at 22.49%, along with improved long-term stability by retaining 99.6% of the initial PCE after 1000 h., This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360], the National Science Foundation of China (Grant No. 22379049), the China Postdoctoral Science Foundation (Grant No. 2022M711236). Support from the Spanish Ministry of Science and Innovation INTERACTION {PID2021-129085OB-I00}) as well as by the French ANR (ANR-18-CE05-0021-01) and the Region Nouvelle Aquitaine (STRIPE project no. 2019-1R1M08) is also acknowledged. X.S. acknowledges support by the CSC (contract 202204910093). The authors acknowledge Franjo Weber for the support in performing KPFM measurements. The authors would like to thank SGIker facilities of the University of Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Powder methodology—An effective way to suppress Sn2+ oxidation in narrow bandgap Pb-Sn Perovskite

  • Gassara, Mahdi
  • Yu, Haixuan
  • Kulkarni, Ashish
  • Wang, Mingkui
  • Kazim, Samrana
  • Ahmad, Shahzada
Lead–tin halide perovskites are of significant merits due to their suitability for tandem solar cell fabrication and for lowering the environmental impact. However, the substantial disparity in the crystallization of tin- and lead-based perovskites, coupled with the tendency of Sn2+ to oxidize rapidly, poses hurdles and rise in defect concentration. Here, the study proposes a cost-effective and facile route to synthesize lead–tin halide perovskite microcrystals. The perovskite formulation and the thin films deposited from lead–tin halide perovskite microcrystal exhibit an improved stability of Sn2+ against environmental humidity conditions compared to their precursor-based counterparts. The device fabricated with FAPb0.5Sn0.5I3 microcrystal measures a power conversion efficiency of 18.55% with an open-circuit voltage of 800 mV, coupled with low-cost precursors and lead mitigation protocols., This work received funding from the European Union H2020 Programme under a European Research Council Consolidator grant [MOLEMAT, 726360], and the National Natural Science Foundation of China (No. 21975088). Support from the Spanish Ministry of Science and Innovation (PID2019-111774RB-100/AEI/10.13039/501100011033 and INTERACTION (PID2021-129085OB-I00)) is acknowledged. A.K. acknowledges funding from DAAD – Deutscher Akademischer Austauschdienst through DAAD PRIME Fellowship., Peer reviewed