Pasar al contenido principal

MEJORANDO LA EFICIENCIA DE CELDAS SOLARES POR EMPAREJADO ESPECTRAL Y AUMENTO DE LA MOVILIDAD DE CARGA

PID2021-128924OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Interconnected Donor–Acceptor-Additive Effects on the Microstructure and Device Performance of PM6:Y6 Solar Cells

  • Gutiérrez Fernández, Edgar
  • Harillo-Baños, Albert
  • Solano, Eduardo
  • Bikondoa, Oier
  • Gutierrez, Junkal
  • Tercjak, Agnieszka
  • Campoy-Quiles, Mariano
  • Riera Galindo, Sergi
  • Martín, Jaime
[Abstract] The microstructure of the donor and acceptor materials within a bulk heterojunction is critical to the performance of organic solar cells, significantly influencing charge generation, transport, and overall efficiency and stability. Here, we studied the role of the donor[thin space (1/6-em)]:[thin space (1/6-em)]acceptor ratio and the use of additives on the resulting microstructure in films and devices based on PM6[thin space (1/6-em)]:[thin space (1/6-em)]Y6. A detailed study of the resulting structures, mainly by X-ray scattering, indicates that the molecular arrangement leading to higher efficiencies is correlated with the presence of a single, well-mixed phase. In this phase, the diffusion of the Y6 molecules is constrained within the PM6 matrix. Interestingly, this microstructure can be achieved either by tuning the composition or by incorporating a solvent additive. Consequently, either approach can be employed to enhance photovoltaic performance., J. M and E. G-F. acknowledge support from the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN-01-2018-2020 “LION-HEARTED”, grant agreement no. 828984. J. M. thanks MICINN for the grant Ref. PID2021-126243NB-I00 and the European Research Council ERC-CoG with reference 101086805. We also acknowledge Ana Martinez Amesti, technician in Electron Microscopy at UPV/EHU, and the teams of the NCD-SWEET beamline at ALBA synchrotron and the XMaS/BM28 beamline at the European Synchrotron. XMaS is a UK national research facility supported by EPSRC. S. R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement no. 101025608, IDEAL. The authors also thank the financial support of the Spanish Ministerio de Ciencia, Innovación y Universidades, under Grants PID2021-128924OB-I00, TED2021-131911B-I00, and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Microstructural Evolution Dominates the Changes in the Thermal Conductivity of Conjugated Polymers Upon Doping

  • Guo, Jiali
  • Asatryan, Jesika
  • Martín, Jaime
  • Campoy-Quiles, Mariano
[Abstract]: In this study, the correlation between the changes in microstructure of conjugated polymers upon doping and their concomitant thermal transport properties is elucidated. Eight conjugated polymers across distinct doping systems are examined: molecular dopants, Lewis acid type dopants, and ion-exchange systems. These findings indicate that, upon doping, there is a decrease in out-of-plane thermal conductivity for five polymers characterized by high structural order, such as those based on thiophene, diketopyrrolopyrrole, and terthiophene-naphthalimide copolymers. Conversely, for polymers with less ordered structures, including regioregular poly(3-hexylthiophene) and thiophene-based polymers with oligoether side chains, an increase in out-of-plane thermal conductivity is observed. To elucidate these trends, several hypotheses are examined: i) enhanced intrinsic thermal anisotropy originating from backbone orientation, ii) variations in the crystalline to amorphous fraction, and (iii) alloying effects resulting from dopant incorporation. Grazing incidence wide-angle X-ray scattering reveals that in-plane alignment exerts a direct influence on both in-plane and out-of-plane thermal conductivities. Photooxidation experiments provide further insights into the role of alloy scattering. Ultimately, the in-plane thermoelectric figure of merit is ascertained for two diketopyrrolopyrrole-based polymers, underscoring the critical importance of measuring thermal and electrical properties in the same orientation to ensure precise thermoelectric evaluation., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie grant agreement no. 955837 (HORATES). The authors acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades and the for its support through Grant CEX2023- in the framework of the Spanish Severo Ochoa Centre of Excellence, and Grants PID2021-128924OB-I00, PID2020-119777GBI00 (THERM2MAIN), PID2022-138908NB-C33, and PDC2021-121814- I00 (COVEQ). The authors also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan agency AGAUR. The authors acknowledge Dr. Bernhard Dörling for support with thermoelectric measurements and Dr. Agustín Mihi as well as ICMAB-CSIC for access to and support with the FTIR equipment. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which J. G. was enrolled. The authors acknowledge support for the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Generalitat de Catalunya; 2021-SGR-00444
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Combinatorial screening of wide band-gap organic solar cell materials with open-circuit voltage between 1.1 and 1.4

  • Casademont-Viñas, Miquel
  • Capolat, Daniel
  • Quesada-Ramírez, Arianna
  • Reinfelds, Matiss
  • Trimmel, Gregor
  • Sanviti, Matteo
  • Martín, Jaime
  • Goñi, Alejandro R.
  • Kirchartz, Thomas
  • Campoy-Quiles, Mariano
[Abstract]: Wide band-gap organic solar cells are gaining interest due to their applications in emergent light-harvesting technologies such as underwater photovoltaics, multi-junction solar cells, or indoor photovoltaics. In this work, a combinatorial screening approach is used to explore binary combinations of three wide band-gap donors (PTQ10, PM6, and D18) and three wide band-gap acceptors (PMI-FF-PMI, O-IDFBR, and IO-4Cl) deposited from solution in two solvents (CB and CF). In total, 18 combinations are blade-coated with active layers exhibiting a thickness gradient generating solar cells with 12 different thicknesses. PTQ10:IO-4Cl and PTQ10:O-IDFBR are the most efficient blends with efficiencies of 7.31% and 6.87%, respectively. The voltage loss analysis shows that PTQ10-based devices exhibit the lowest non-radiative voltage losses, whereby the PTQ10:O-IDFBR combination has the lowest voltage loss of all studied blends, with a remarkably high open-circuit voltage (Voc) of 1.35 V. Due to their high performance and Voc, PTQ10:O-IDFBR devices were also studied for indoor light harvesting, achieving an efficiency of 22.6% and a Voc of 1.21 V under 560 lux indoor illumination. To the best of our knowledge, this indoor Voc value is the highest achieved in the field of indoor organic photovoltaics., The Spanish “Ministerio de Ciencia e Innovación (MICINN)” is gratefully acknowledged for its support through grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PGC2018-095411-B-I00 (RAINBOW), TED2021-131911B-I00, and PID2021-128924OB-I00 (ISOSCELLES). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444. M. C. V. acknowledges an FPI fellowship (PRE2019-089855) from MICINN co-financed by the European Social Fund. M. C. V. and A. Q. also thank the PhD program in Materials Science from Universitat Autònoma de Barcelona in which both were enrolled. M. C. V. acknowledges Dr Benjamin Klingebiel and Mr Markus Hülsbeck for their help during EL and PL measurements, Mr Wilfried Reetz for his help during EQEPV measurements. Dr Markus Scharber is acknowledged for his insights in PMI-FF-PMI-based solar cells. Dr Alfonsina A. A. Torimtubun is acknowledged for her helpful discussions on device fabrication. M. R. and G. T. thank Birgit Ehmann, Colien Purkathofer, and Stefan Weber for synthesis of PMI-FF-PM, Generalitat de Catalunya; 2021-SGR-00444
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Tailoring the Glassy Phase in Polymer Semiconductors Tunes Their Optical Properties

  • Ramos, Nicolás
  • Asatryan, Jesika
  • Di Lisio, Valerio
  • Campoy-Quiles, Mariano
  • Martín, Jaime
  • Cangialosi, Daniele
[Abstract] Active layers in organic electronic devices often contain extensive glassy (non-crystalline) regions whose roles remain largely uncharted compared to their crystalline counterparts. Here, we demonstrate that the thermodynamic state of these glassy phases constitutes a powerful lever for tuning the optoelectronic properties of polymer semiconductors. Using poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PFO) as a model system, we show that controlled vitrification kinetics and formation from distinct liquid precursors—including isotropic and liquid-crystalline mesophases—yield glassy PFO films with markedly different microstructures and photoluminescence characteristics. These results uncover direct correlations between glass formation pathways and functional electronic behavior, establishing the glassy state as an active design parameter rather than a passive structural byproduct. Our findings thus introduce a paradigm shift in the processing-structure-property relationships of polymer semiconductors and open new avenues for glass-phase engineering toward enhanced efficiency and stability in next-generation optoelectronic devices., We thank De Mello’s group for kindly providing the PFO material. J.M. thanks financial support from the MICIU (Grant Agreement PID2021-126243NB-I00), the European Research Council (Grant 101086805) and Xunta de Galicia through the Convenio-ERC program. M.C.Q. acknowledge financial support from MCIN/ AEI /10.13039/501100011033/ and the European Union (FEDER) through grants PID2021-128924OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Center of Excellence. D.C. thanks the financial support from Eusko Jaurlaritza (Basque Government) through the grant IT-1566-22., Eusko Jaurlaritza; IT-1566-22
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

High-throughput Thickness Gradient Screening Reveals Thickness and Light-intensity Dependent Efficiency in Indoor Organic Photovoltaics

  • Saeed, Muhammad Ahsan
  • Swennen, Giel
  • Prada-Cortés, Marián
  • Capella Guardià, Francesc Xavier
  • Casademont-Viñas, Miquel
  • Rodríguez-Martínez, Xabier
  • Martín, Jaime
  • Vandewal, Koen
  • Campoy-Quiles, Mariano
[Abstract]: Indoor organic photovoltaics (OPVs) are promising power sources for Internet-of-Things devices, but optimizing performance under diverse indoor lighting is challenging because the optimal thickness of the active layer depends on the competition between charge transport and recombination, as well as on the incident light spectrum in a complex manner. Here, we use a high-throughput customized blade-coating system to generate continuous active-layer thickness gradients (50–450 nm) for five binary blends comprising three wide-bandgap donors (PTQ10, PM6, D18) and three non-fullerene acceptors (o-IDFBR, eh-IDTBR, FCC-Cl). Devices were characterized under four LED spectra (2700 K, 5200 K, 6500 K, B4) using a spectrum-on-demand source. Across 600 devices, intermediate thicknesses maximize shunt resistance (RP) and fill factor, whereas thin and thick layers suffer from leakage and recombination. PTQ10:FCC-Cl shows broad thickness tolerance (≈230–410 nm) and moderate spectral stability, with PCE varying by only ≈2.6% across indoor spectra and reaching a maximum of ≈21.7% under 2700 K. Conversely, PM6:FCC-Cl attains higher PCE (≈26.4%) but is strongly thickness-sensitive, with peak efficiency realized within a narrow range (∼305 nm) and varying by ≈15% across all four spectra. Analysis of intensity- and thickness-dependent charge transport indicates that performance is governed by photon absorption, spectral overlap and insufficient RP. This work demonstrates a rapid screening method and highlights the importance of thickness- and spectrum-optimized active layers for efficient indoor OPVs., This work was funded by the European Commission through the Marie Skłodowska-Curie project HOPES (101104491). The authors acknowledge financial support from the Spanish Ministry of Science, Innovation and University through the Agencia Estatal de Investigación (MCIN/AEI/10.13039/501-100011033/) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence. The authors would like to thank Prof. Alejandro Goñi (ICMAB-CSIC) and Dr Sergi Riera (ICMAB-CSIC) for useful discussions. We are also thankful to the Scanning Probe Microscopy Service of ICMAB-CSIC (Dr Laura Rodríguez) for conducting AFM measurements. FXCG thanks Digital Surf for providing MountainsLab® Premium software, which was used for the analysis and visualization of AFM data. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. J.M. thanks financial support from European Research Council (grant no. 101086805). FXCG acknowledges the PhD program in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Universal, Highly Stable Dopant System for Organic Semiconductors Based on Lewis-Paired Dopant Complexes

  • Zapata-Arteaga, Osnat
  • Perevedentsev, Aleksandr
  • Prete, Michela
  • Busato, Stephan
  • Floris, Paolo Sebastiano
  • Asatryan, Jesika
  • Rurali, Riccardo
  • Martín, Jaime
  • Campoy-Quiles, Mariano
[Abstract]: Chemical doping of organic semiconductors is an essential enabler for applications in electronic and energy-conversion devices such as thermoelectrics. Here, Lewis-paired complexes are advanced as high-performance dopants that address all the principal drawbacks of conventional dopants in terms of limited electrical conductivity, thermal stability, and generality. The study focuses on the Lewis acid B(C6F5)3 (BCF) and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) bearing Lewis-basic −CN groups. Due to its high electron affinity, BCF:F4TCNQ dopes an exceptionally wide range of organic semiconductors, over 20 of which are investigated. Complex activation and microstructure control lead to conductivities for poly(3-hexylthiophene) (P3HT) exceeding 300 and 900 S cm–1 for isotropic and chain-oriented films, respectively, resulting in a 10 to 50 times larger thermoelectric power factor compared to those obtained with neat dopants. Moreover, BCF:F4TCNQ-doped P3HT exhibits a 3-fold higher thermal dedoping activation energy compared to that obtained with neat dopants and at least a factor of 10 better operational stability., We thank Martin Kreuzer for extensive support and fruitful discussions at the Alba synchrotron BL01-MIRAS beamline. Jiali Guo and Dr. Edgar Gutierrez are also thanked for their support with the Alba experiments. We also thank Prof. Walter Caseri and Dr Marco D’Elia (Department of Materials, ETH Zürich) for generously contributing samples of poly(phenylene methylene)s as well as the many stimulating discussions. Dr Agustín Mihi (ICMAB-CSIC) is thanked for providing access to the Bruker IR spectrophotometry equipment. This work was financially supported by the European Commission through the Marie Skłodowska-Curie project HORATES (GA- 955837), by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) under grants PID2020-119777GB-I00, PID2021-128924OB-I00 and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S (particularly, PALOMA grant within ICMAB’s ‘Frontier Interdisciplinary Projects’ (FIP-2021) Program), and by the Generalitat de Catalunya under grant no. 2017 SGR 1506. The work of PSF has been carried out within the PhD program in Physics of the Universitat Autònoma de Barcelona (UAB). We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources., Generalitat de Catalunya; 2017-SGR-1506
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

On The Thermal Conductivity of Conjugated Polymers for Thermoelectrics

  • Rodríguez-Martínez, Xabier
  • Martín, Jaime
  • Campoy-Quiles, Mariano
[Abstract]: The thermal conductivity (κ) governs how heat propagates in a material, and thus is a key parameter that constrains the lifetime of optoelectronic devices and the performance of thermoelectrics (TEs). In organic electronics, understanding what determines κ has been elusive and experimentally challenging. Here, by measuring κ in 17 π-conjugated materials over different spatial directions, it is statistically shown how microstructure unlocks two markedly different thermal transport regimes. κ in long-range ordered polymers follows standard thermal transport theories: improved ordering implies higher κ and increased anisotropy. κ increases with stiffer backbones, higher molecular weights and heavier repeat units. Therein, charge and thermal transport go hand-in-hand and can be decoupled solely via the film texture, as supported by molecular dynamics simulations. In largely amorphous polymers, however, κ correlates negatively with the persistence length and the mass of the repeat unit, and thus an anomalous, albeit useful, behavior is found. Importantly, it is shown that for quasi-amorphous co-polymers (e.g., IDT-BT) κ decreases with increasing charge mobility, yielding a 10-fold enhancement of the TE figure-of-merit ZT compared to semi-crystalline counterparts (under comparable electrical conductivities). Finally, specific material design rules for high and low κ in organic semiconductors are provided., The authors would like to acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centers of Excellence in R&D and project reference PID2021- 128924OB-I00 as well acknowledge Prof. Alejandro R. Goñi (ICMAB-CSIC, ICREA) for his valuable help in setting up the Raman thermometry measurement platform. The authors are thankful to Dr. Aleksandr Perevedentsev (ICMAB-CSIC) for his know-how regarding the fabrication of free-standing films, as well as for the preparation of the drop cast DH6T films. The authors are very thankful to Prof. Paul Smith (ETH Zürich) for fruitful discussions about polymer processing and Prof. Christian Müller for his useful comments on this work, and the suggestions regarding thermal diffusivity. The authors also thank Andrés Gómez for performing the nanoindentation experiments. I.M. and H.C. acknowledge King Abdullah University of Science and Technology Office of Sponsored Research (OSR) under awards no. OSR-2018-CARF/CCF-3079, and OSR-4106 CPF2019 as well as EC FP7 Project SC2 (610115).as the European Research Council (ERC) under grant agreement no. 648901. This work was financially supported by the European Commission through the Marie Skłodowska-Curie projects HORATES (GA-955837). J.M. is also grateful to the Spanish Ministry of Science and Innovation through project PGC2018-094620-A-I00. The authors also acknowledge the support from the Marie Skłodowska-Curie program (action no. 793726 – TELIOTES) and the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. The authors, Arabia Saudita. King Abdullah University of Science and Technology; OSR-2018-CARF/CCF-3079, Arabia Saudita. King Abdullah University of Science and Technology; OSR-4106 CPF2019
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

On the Impact of Selective Donor:acceptor Structural Ordering in PBDB-T:ITIC Organic Solar Cells

  • Rodríguez-Martínez, Xabier
  • Marina, Sara
  • Harillo-Baños, Albert
  • Campoy-Quiles, Mariano
  • Martín, Jaime
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract]: The bulk heterojunction (BHJ) is the standard configuration of the photoactive layer in single-junction organic solar cells. Therein, electron-rich (a donor polymer) and electron deficient (a small molecule acceptor) organic semiconductors are intimately blended to form a complex 3D network of crystallites and vitrified regions that altogether determine the final device performance. Studying the relationship between said performance and the structural order achieved in the photoactive materials individually is desirable to discern the underlying structure–function relationship in organic solar cells, hence isolating, with no ambiguities, the role played by the structural order achieved in the donor and acceptor domains themselves on the device performance. This work precisely tackles the archetypal PBDB-T:ITIC blend to demonstrate how the structural order of the donor and acceptor fractions in the BHJ can be selectively tailored through an adequate selection of co-solvents during the film formation process. When using chloroform as unique solvent, both components exhibit a low degree of order in the BHJ. Conversely, the use of ortho-xylene yields BHJs in which PBDB-T shows enhanced structural order. Furthermore, the addition of 1,8-diiodooctane as co-solvent is found to spark the crystallization of ITIC without effect on the degree of order of PBDB-T, resulting in downgraded photovoltaic performance. Overall, BHJs in which ITIC remains in its vitrified state are beneficial, in which case the structural order achieved by PBDB-T has little to no effect. Notwithstanding, BHJs that contain ordered materials (donor and/or acceptor) show virtually no degradation after more than 3.5 years of shelf storage. This study, thus, pinpoints to (i) the microstructure attained by the acceptor domains and (ii) the presence of crystalline domains of either type (donor and/or acceptor) as the main determinants of the maximum achievable performance and the shelf stability of organic solar cells, respectively., J. M. and S. M. thank financial support from the MICIU (PID2021-126243NB-I00). J. M. and X. R.-M. acknowledge funding from the European Research Council (Grant 101086805). GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. M. C.-Q. and A. H.-B. acknowledge support by the MICIU/AEI/ 10.13039/501100011033 for the ‘‘Severo Ochoa’’ program for Centres of Excellence CEX2023-001263-S and grants PID2021- 128924OB-I00 and TED2021-131911B-I00. The authors acknowledge Universidade da Corun˜a/CISUG for the funding received for open access charge.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Increasing Polymer Molecular Weight Enables Low-Donor-Content, Efficient and Scalable Semitransparent Organic Solar Cells

  • Martín-Ruiz, Martín
  • Pinyol Castillo, Paula
  • Rodríguez-Martínez, Xabier
  • Martín, Jaime
  • Burgués-Ceballos, Ignasi
  • Campoy-Quiles, Mariano
[Abstract]: The advent of non-fullerene acceptors has enabled high efficiencies in organic photovoltaics (OPVs). The active layer of such devices typically consists of a narrow-bandgap molecular acceptor (A), with strong light absorption in the near-infrared region, combined with a polymer donor (D) that harvests visible photons. Reducing the donor content is a good strategy to increase transparency, but often leads to lower power conversion efficiencies (PCEs) due to loss in absorption efficiency and, importantly, a worsening of the electrical properties. Here, we tackle this compromise by investigating if the improved electrical properties granted by high polymer molecular weight (Mw) can simultaneously result in a high PCE and high visible transparency, thus leading to efficient semitransparent OPVs. We investigate the polymer : non-fullerene blend PTB7-Th : IEICO-4F as a function of blend ratio for two polymer Mw values. We show that increasing the PTB7-Th Mw from 57 kDa to 125 kDa promotes a film morphology that enhances charge carrier mobility. Moreover, we demonstrate that using high-Mw PTB7-Th enables high PCEs in blends with as low a polymer content as 28%. Interestingly, we find that this behaviour can be explained by improved percolation (granted by higher Mw) and higher acceptor crystallinity. In order to assess the scalability of the system, we compared devices fabricated in nitrogen or in air, and investigated the use of xylene as a greener solvent, the effect of increasing the cell area, the use of semitransparent electrodes and the fabrication of modules, identifying cell area as the most critical factor that negatively impacts PCE. Finally, we show the generality of the concept by extending it to two other polymers and two other acceptor molecules., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence, and the Ramon y Cajal program (RYC2022-035399-I). P. P.-C. thanks Eurecat for the “Vicente López” PhD grant. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA Synchrotron (experiment ID AV-2024098865) with the collaboration of ALBA staff. X. R.-M. and J. M. are grateful for financial support from the European Research Council (Grant No. 101086805). We also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan Agency AGAUR. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which M. M.-R. is enrolled., AGAUR; 2021-SGR-00444
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laminated Organic Photovoltaic Modules for Agrivoltaics and Beyond: An Outdoor Stability Study of All-Polymer and Polymer:Small Molecule Blends

  • Rodríguez Martínez, Xabier
  • Riera Galindo, Sergi
  • Ever Aguirre, Luis
  • Campoy Quiles, Mariano
  • Arwin, Hans
  • Inganäs, Olle
The integration of organic photovoltaic (OPV) modules on greenhouses is an encouraging practice to offset the energy demands of crop growth and provide extra functionality to dedicated farmland. Nevertheless, such OPV devices must meet certain optical and stability requirements to turn net zero energy greenhouse systems a reality. Here a donor:acceptor polymer blend is optimized for its use in laminated devices while matching the optical needs of crops. Optical modeling is performed and a greenhouse figure-of-merit is introduced to benchmark the trade-off between photovoltaic performance and transparency for both chloroplasts and humans. Balanced donor:acceptor ratios result in better-performing and more thermally stable devices than acceptor-enriched counterparts. The optimized polymer blend and state-of-the-art polymer:small-molecule blends are next transferred to 25 cm2 laminated modules processed entirely from solution and in ambient conditions. The modules are mounted on a greenhouse as standalone or 4-terminal tandem configurations and their outdoor stability is tracked for months. The study reveals degradation modes undetectable under laboratory conditions such as module delamination, which accounts for 10–20% loss in active area. Among the active layers tested, polymer:fullerene blends are the most stable and position as robust light harvesters in future building-integrated OPV systems., X.R.-M., S.R.-G., and O.I. acknowledge the Knut and Alice Wallenberg Foundation for funding. S.R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement No. 101025608, IDEAL. The authors acknowledge Dr. Bernhard Dörling for building the electronic controller of the accelerated blade coater and Dr. M. Gibert-Roca for designing the corresponding multiplexor. M.C.-Q. thanks to the Spanish Ministry of Science and Innovation for funding through ISOSCELLES project (PID2021-128924OB-I00). The table of contents figure contains freely available resources from https://flaticon.com., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

RAINBOW Organic Solar Cells: Implementing Spectral Splitting in Lateral Multi-Junction Architectures

  • Gibert Roca, Martí
  • Casademont Viñas, Miquel
  • Liu, Quan
  • Vandewal, Koen
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
While multi-junction geometries have the potential to boost the efficiency of organic solar cells, the experimental gains yet obtained are still very modest. This work proposes an alternative spectral splitting device concept in which various individual semiconducting junctions with cascading band gaps are laid side by side, thus the name RAINBOW. Each lateral sub-cell receives a fraction of the spectrum that closely matches the main absorption band of the given semiconductor. Here, simulations are used to identify the important material and device properties of each RAINBOW sub-cell. Using the resulting design rules, three systems are selected, namely PBDB-T-2F:IO-4Cl, PBDB-T-2F:Y6 and PTB7-Th:COTIC-4F, and their potential as sub-cells in this geometry is experimentally investigated. With the aid of a custom built setup that generates spectrally spread sunlight on demand, the simulations are experimentally validated, showing that this geometry can lead to a reduction in thermalization losses and an improvement in light harvesting, which results in a relative improvement in efficiency of 46.6% with respect to the best sub-cell. Finally, a working proof of concept monolithic device consisting of two sub-cells deposited from solution on the same substrate is fabricated, thus demonstrating the feasibility and the potential of the RAINBOW solar cell concept. This article is protected by copyright. All rights reserved., The Spanish "Ministerio de Ciencia e Innovación (MICINN)" is gratefully acknowledged for its supportthrough grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo OchoaCentre of Excellence program and the AEI/FEDER(UE) grants PGC2018-095411-B-I00(RAINBOW),TED2021-131911B-I00and PID2021-128924OB-I00(ISOSCELLES). The authors also thank the Cata-lan agency AGAUR for grant2021-SGR-00444. MCV acknowledges a FPI fellowship (PRE2019-089855)from MICINN co-financed by the European Social Fund and MGR acknowledges the scholarship FPU16/02631 from the Spanish "Ministerio de Educación". MCV and MGR also thank the PhD programme in Materi-als Science from Universitat Autònoma de Barcelona in which both were enrolled. KV and QL acknowl-edge funding by the European Research Council (ERC, grant agreement864625)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Using pressure to unravel the structure-dynamic-disorder relationship in metal halide perovskites

  • Xu, Kai
  • Pérez Fidalgo, Luis
  • Charles, Bethan L.
  • Weller, Mark T.
  • Alonso Carmona, M. Isabel
  • Goñi, Alejandro R.
The exceptional optoelectronic properties of metal halide perovskites (MHPs) are presumed to arise, at least in part, from the peculiar interplay between the inorganic metal-halide sublattice and the atomic or molecular cations enclosed in the cage voids. The latter can exhibit a roto-translative dynamics, which is shown here to be at the origin of the structural behavior of MHPs as a function of temperature, pressure and composition. The application of high hydrostatic pressure allows for unraveling the nature of the interaction between both sublattices, characterized by the simultaneous action of hydrogen bonding and steric hindrance. In particular, we find that under the conditions of unleashed cation dynamics, the key factor that determines the structural stability of MHPs is the repulsive steric interaction rather than hydrogen bonding. Taking as example the results from pressure and temperature-dependent photoluminescence and Raman experiments on MAPbBr[Formula: see text] but also considering the pertinent MHP literature, we provide a general picture about the relationship between the crystal structure and the presence or absence of cationic dynamic disorder. The reason for the structural sequences observed in MHPs with increasing temperature, pressure, A-site cation size or decreasing halide ionic radius is found principally in the strengthening of the dynamic steric interaction with the increase of the dynamic disorder. In this way, we have deepened our fundamental understanding of MHPs; knowledge that could be coined to improve performance in future optoelectronic devices based on this promising class of semiconductors., The Spanish “Ministerio de Ciencia e Innovación (MICINN)” is gratefully acknowledged for its support through Grant CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) Grants PGC2018-095411-B-100 (RAINBOW) and PID2021-128924OB-I00 (ISOSCELLES). The authors also thank the Catalan agency AGAUR for Grant 2021-SGR-00444 and the National Network “Red Perovskitas” (MICINN funded). K.X. acknowledges a fellowship (CSC201806950006) from China Scholarship Council and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which he was enrolled. B.C. thanks the EPSRC for PhD studentship funding via the University of Bath, CSCT CDT (EP/G03768X/1)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectrum on demand light source (SOLS) for advanced photovoltaic characterization

  • Casademont Viñas, Miquel
  • Gibert Roca, Martí
  • Campoy Quiles, Mariano
  • Goñi, Alejandro R.
We report a multi-purpose spectrum-on-demand light source (SOLS), conceived primarily but not exclusively for the multiple and advanced characterization of photovoltaic (PV) materials and devices. The apparatus is a spectral shaper illumination device, providing a tunable and spectrally shaped light beam produced by modulating the intensity and/or wavelength range of a primary light source. SOLS stands out from the state of the art because it produces almost any spectrum on demand and delivers two types of output: a spectrally shaped and spatially homogeneous beam over its cross section for areal illumination or a spatially and spectrally split beam into its wavelength components, a unique capability suited to characterize lateral-tandem (Rainbow) solar cells. The tuneability from broadband to narrowband illumination enables two characterization devices into one, namely, a solar simulator for the determination of the power conversion efficiency and an external quantum efficiency measuring system. We expect the SOLS setup to accelerate material screening, enabling the discovery and optimization of novel multi-component materials and devices, in particular for emergent PV technologies like organic, metal halide perovskites, or multi-junction geometries, as well as novel PV applications such as indoors, building integrated, or agrivoltaics, among others., The Spanish Ministerio de Ciencia e Innovación (MICINN) is gratefully acknowledged for its support through Grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Center of Excellence program and the AEI/FEDER(UE) under Grant Nos. PID2021-128924OB-I00 (ISOSCELLES) and PDC2022-134001-I00 (SOLS-PV proof of concept). The authors also acknowledge the Catalan agency AGAUR for Grant No. 2021-SGR-00444. M.C.-V. acknowledges an FPI fellowship (Grant No. PRE2019-089855) from MICINN cofinanced by the European Social Fund, and M.G.-R. acknowledges the scholarship Grant No. FPU16/02631 from the Spanish “Ministerio de Educación.” M.C.-V. and M.G.-R. also acknowledge the Ph.D. program in Materials Science from the Universitat Autònoma de Barcelona, in which both were enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anomalous Electron–Phonon Coupling in Cesium-Substituted Methylammonium Lead Iodide Perovskites

  • Pérez Fidalgo, Luis
  • Xu, Kai
  • Charles, Bethan L.
  • Weller, Mark T.
  • Alonso Carmona, M. Isabel
  • Goñi, Alejandro R.
Most metal halide perovskites (MHPs) which under ambient conditions crystallize in a tetragonal or cubic phase exhibit a fairly linear increase of the fundamental gap with increasing temperature, in frank contrast to other conventional semiconductors. Though valid in general for MHPs, it has been shown for the archetypal perovskite MAPbI3 (MA stands for methylammonium) that such a behavior is due to an almost equal footing of the effects of thermal expansion on the electronic states and the temperature-induced gap renormalization due to the electron–phonon interaction. Here, the influence of the incorporation of small amounts of Cs on the gap renormalization was investigated in two CsxMA1–xPbI3 single crystals (x = 0.05 and 0.1). Strikingly, from ambient to a temperature Ton of 250–280 K, the slope of the linear temperature dependence of the energy gap for both Cs-containing samples is almost half that for pure MAPbI3. Below Ton and within the stability range of the tetragonal phase, the slope recovers the value of MAPbI3. Based on density functional theory calculations, this surprising behavior is explained as being due to the appearance of an additional electron–phonon coupling mechanism ascribed to dynamic tilting of the PbI6 octahedrons. The latter is activated by the translational dynamics of the Cs cations between equivalent potential minima inside the inorganic cage voids, which is unfolded above the onset temperature Ton. These results provide further evidence of the key role that the A-site cation dynamics plays in the optoelectronic properties of this fascinating class of materials., The Spanish ”Ministerio de Ciencia e Innovación (MICINN)” is gratefully acknowledged for its support through grant CEX2019-000917 S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PGC2018-095411-B-100 (RAINBOW) and PID2021-128924OB-I00 (ISOSCELLES). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444 and the National Network ”Red Perovskitas” (MICINN funded). K.X. acknowledges a fellowship (CSC201806950006) from China Scholarship Council and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which he was enrolled. B.C. thanks the EPSRC for PhD studentship funding via the University of Bath, CSCT CDT (EP/G03768X/1). We would also like to thank ISIS for the award of beamtime under Proposal RB1610285(ISIS)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Polymer Molecular Weight Yields Solar Cells with Simultaneously Improved Performance and Thermal Stability

  • Riera Galindo, Sergi
  • Sanz Lleó, Marta
  • Gutiérrez Fernández, Edgar
  • Ramos, Nicolás
  • Mas Torrent, Marta
  • Martín, Jaime
  • López Mir, Laura
  • Campoy Quiles, Mariano
Simple synthetic routes, high active layer thickness tolerance as well as stable organic solar cells are relentlessly pursued as key enabling traits for the upscaling of organic photovoltaics. Here, the potential to address these issues by tuning donor polymer molecular weight is investigated. Specifically, the focus is on PTQ10, a polymer with low synthetic complexity, with number average molecular weights of 2.4, 6.2, 16.8, 52.9, and 54.4 kDa, in combination with three different non-fullerene acceptors, namely Y6, Y12, and IDIC. Molecular weight, indeed, unlocks a threefold increase in power conversion efficiency for these blends. Importantly, efficiencies above 10% for blade coated devices with thicknesses between 200 and 350 nm for blends incorporating high molecular weight donor are shown. Spectroscopic, GIWAXS and charge carrier mobility data suggest that the strong photocurrent improvement with molecular weight is related to both, improved electronic transport and polymer contribution to exciton generation. Moreover, it is demonstrated that solar cells based on high molecular weight PTQ10 are more thermally stable due to a higher glass transition temperature, thus also improving device stability., The authors are grateful to 1-Material for providing custom molecular weight PTQ10 polymer and for the fruitful discussions. S.R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement No. 101025608, IDEAL; for the financial support provided by Ajuntament de Barcelona and the Ministeri de Ciència i Innovació within the framework of Barcelona Capital Cultural i Científic, through the project Bus Stop Integrated Organic Photovoltaic (TERRA) (22S09542-001). The authors acknowledge Dr. Bernhard Dörling for building the electronic controller of the accelerated blade coater and Dr. M. Gibert-Roca for designing the corresponding multiplexor. M.C.-Q. thanks to the Spanish Ministry of Science and Innovation for funding through projects PID2021-128924OB-I00 and TED2021-131911B-I00. This work was supported by the MADRAS project funded from the European Union Horizon 2020 research and innovation programme under grant agreement No. 862492. .This work was also funded by MCIN/AEI/10.13039/501100011033/ERDF,UE with projects GENESIS PID2019-111682RB-I00 and SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the Electron-Deficient Central Core on Fused-Ring Nonfullerene Acceptors: Deciphering the Relationships Between Structure, Property, and Photovoltaic Performance

  • Suárez Blas, Fátima
  • Pandolfi, Lorenzo
  • Alonso Navarro, Matías J.
  • Riera Galindo, Sergi
  • Martínez, José I.
  • Dörling, Bernhard
  • Funes, Alejandro
  • Harillo Baños, Albert
  • Venuti, Elisabetta
  • Ramos, María Mar
  • Campoy Quiles, Mariano
  • Segura, José L.
In the field of organic solar cells, organic semiconductors with Y6-based chemical structure and their corresponding quinoxaline-based assemblies are settled down as promising materials in the field of OSCs. However, the chemical structure of Y6 derivatives does not allow an expansion in the electron-withdrawing central core, in contrast to their quinoxaline-based analogues. For this reason, herein, two different quinoxaline-based A–D–A′–D–A derivatives with 2D π-extended cores endowed with electroactive rylenimide moieties, named as Y6-1Napht and Y6-1Pery, are designed and synthesized. These enlarged fused-ring electron acceptors (FREAs) allow to study the influence of the length of the ryleneimide moiety on its structural, optical, electrochemical, and thermal properties as well as the tailoring of the frontier molecular orbitals. These results are also supported by quantum chemical calculations and photoluminescence measurements that provide additional information about their thermal stability and the microstructure of the films. Finally, as a proof of concept and to study the influence of these chemical modifications on the central core, solar cells based on these π-conjugated nonfullerene acceptors are fabricated., This work was financially supported by the Spanish Ministry of Science and Innovation (grant nos. PID2022-138908NB-C33, PID2021-128924OB-I00, PID2020-113142RB-C21, PLEC2021-007906, TED2021-131911B-I00, TED2021-129886B-C43, and TED2021-129416A-I00) and the Complutense University of Madrid (INV.GR.00.1819.10759). F.S.B. and M.J.A.N. gratefully acknowledge Universidad Rey Juan Carlos for their predoctoral and postdoctoral contracts. L.P. acknowledges funding by the “Toso Montanari” scholarship N.3280 (ID 1887). S.R.G. is thankful to Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for Grant Agreement No. 101025608, IDEAL. J.I.M. also acknowledges funding from Comunidad de Madrid (grant nos. S2018/NMT-4367 and Y2020/NMT-6469)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combinatorial screening of wide band-gap organic solar cell materials with open-circuit voltage between 1.1 and 1.4 V

  • Casademont Viñas, Miquel
  • Capolat, Daniel
  • Quesada Ramírez, Arianna
  • Reinfelds, Matiss
  • Trimmel, Gregor
  • Sanviti, Matteo
  • Martín, Jaime
  • Goñi, Alejandro R.
  • Kirchartz, Thomas
  • Campoy Quiles, Mariano
Wide band-gap organic solar cells are gaining interest due to their applications in emergent light-harvesting technologies such as underwater photovoltaics, multi-junction solar cells, or indoor photovoltaics. In this work, a combinatorial screening approach is used to explore binary combinations of three wide band-gap donors (PTQ10, PM6, and D18) and three wide band-gap acceptors (PMI-FF-PMI, O-IDFBR, and IO-4Cl) deposited from solution in two solvents (CB and CF). In total, 18 combinations are blade-coated with active layers exhibiting a thickness gradient generating solar cells with 12 different thicknesses. PTQ10:IO-4Cl and PTQ10:O-IDFBR are the most efficient blends with efficiencies of 7.31% and 6.87%, respectively. The voltage loss analysis shows that PTQ10-based devices exhibit the lowest non-radiative voltage losses, whereby the PTQ10:O-IDFBR combination has the lowest voltage loss of all studied blends, with a remarkably high open-circuit voltage (Voc) of 1.35 V. Due to their high performance and Voc, PTQ10:O-IDFBR devices were also studied for indoor light harvesting, achieving an efficiency of 22.6% and a Voc of 1.21 V under 560 lux indoor illumination. To the best of our knowledge, this indoor Voc value is the highest achieved in the field of indoor organic photovoltaics., The Spanish “Ministerio de Ciencia e Innovaci´ on (MICINN)” is gratefully acknowledged for its support through grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PGC2018-095411-B-I00 (RAINBOW), TED2021-131911B-I00, and PID2021-128924OB-I00 (ISOSCELLES). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444. M. C. V. acknowledges an FPI fellowship (PRE2019-089855) from MICINN co-nanced by the European Social Fund. M. C. V. and A. Q. also thank the PhD program in Materials Science from Universitat Aut` onoma de Barcelona in which both were enrolled. M. C. V. acknowledges Dr Benjamin Klingebiel and Mr Markus Hülsbeck for their help during EL and PL measurements, Mr Wilfried Reetz for his help during EQEPVmeasurements. Dr Markus Scharber is acknowledged for his insights in PMI-FF-PMI-based solar cells. Dr Alfonsina A. A. Torimtubun is acknowledged for her helpful discussions on device fabrication. M. R. and G. T. thank Birgit Ehmann, Colien Purkathofer, and Stefan Weber for synthesis of PMI-FF-PMI., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Screening of Low-Bandgap Organic Semiconductors for Photovoltaic Applications: In the Search of Correlations

  • Torimtubun, Alfonsina Abat Amelenan
  • Alonso Navarro, Matías Jesús
  • Quesada Ramírez, Arianna
  • Rodríguez Martínez, Xabier
  • Segura, José L.
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
Low-bandgap nonfullerene acceptors (NFAs) offer a unique potential for photovoltaic (PV) applications, such as transparent PV and agrivoltaics. Evaluating each new PV system to achieve the optimum thickness, microstructure, and device performance is, however, a complex multiparametric challenge with large time and resource requirements. Herein, the PV potential of low-bandgap donor and NFA materials by combining high-throughput screening and statistical methods is evaluated. The use of thickness gradients (20–600 nm) facilitates the fabrication of more than 2000 doctor-bladed devices from 24 different low-bandgap blend combinations. The corresponding power conversion efficiencies varies significantly, from 0.06% to 10.45% across materials and thicknesses. The self-consistency of the large dataset allows to perform a parameter sensitivity study as well as parameter correlation analysis. These reveal that the choice of materials and energy alignment-related features (i.e., electron affinity offset, ionization energy offset, bandgap, and energy loss) has the largest influence on final device performance, while processing conditions appear less important for the final efficiencies. Our study demonstrates that high-throughput experimentation is a perfect match for correlation analyses in order to gain a statistically meaningful understanding of these systems, potentially accelerating the discovery of new materials., The authors acknowledge financial support from the Spanish Ministerio de Ciencia e Innovación under grant PID2021-128924OB-I00 in the framework of the Spanish R&D program Generacion de Conocimiento 2021, TED2021-131911B-I00, and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence. X.R.-M. acknowledges the Alexander von Humboldt Foundation for funding his postdoctoral fellowship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On The Thermal Conductivity of Conjugated Polymers for Thermoelectrics

  • Rodríguez Martínez, Xabier
  • Saiz, Fernan
  • Dörling, Bernhard
  • Marina, Sara
  • Guo, Jiali
  • Xu, Kai
  • Chen, Hu
  • Martin, Jaime
  • McCulloch, Iain
  • Rurali, Riccardo
  • Reparaz, J. Sebastian
  • Campoy Quiles, Mariano
The thermal conductivity (κ) governs how heat propagates in a material, and thus is a key parameter that constrains the lifetime of optoelectronic devices and the performance of thermoelectrics (TEs). In organic electronics, understanding what determines κ has been elusive and experimentally challenging. Here, by measuring κ in 17 π-conjugated materials over different spatial directions, it is statistically shown how microstructure unlocks two markedly different thermal transport regimes. κ in long-range ordered polymers follows standard thermal transport theories: improved ordering implies higher κ and increased anisotropy. κ increases with stiffer backbones, higher molecular weights and heavier repeat units. Therein, charge and thermal transport go hand-in-hand and can be decoupled solely via the film texture, as supported by molecular dynamics simulations. In largely amorphous polymers, however, κ correlates negatively with the persistence length and the mass of the repeat unit, and thus an anomalous, albeit useful, behavior is found. Importantly, it is shown that for quasi-amorphous co-polymers (e.g., IDT-BT) κ decreases with increasing charge mobility, yielding a 10-fold enhancement of the TE figure-of-merit ZT compared to semi-crystalline counterparts (under comparable electrical conductivities). Finally, specific material design rules for high and low κ in organic semiconductors are provided., The authors would like to acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centers of Excellence in R&D and project reference PID2021-128924OB-I00 as well as the European Research Council (ERC) under grant agreement no. 648901. This work was financially supported by the European Commission through the Marie Skłodowska-Curie projects HORATES (GA-955837). J.M. is also grateful to the Spanish Ministry of Science and Innovation through project PGC2018-094620-A-I00. The authors also acknowledge the support from the Marie Skłodowska-Curie program (action no. 793726 – TELIOTES) and the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. The authors acknowledge Prof. Alejandro R. Goñi (ICMAB-CSIC, ICREA) for his valuable help in setting up the Raman thermometry measurement platform. The authors are thankful to Dr. Aleksandr Perevedentsev (ICMAB-CSIC) for his know-how regarding the fabrication of free-standing films, as well as for the preparation of the drop cast DH6T films. The authors are very thankful to Prof. Paul Smith (ETH Zürich) for fruitful discussions about polymer processing and Prof. Christian Müller for his useful comments on this work, and the suggestions regarding thermal diffusivity. The authors also thank Andrés Gómez for performing the nanoindentation experiments. I.M. and H.C. acknowledge King Abdullah University of Science and Technology Office of Sponsored Research (OSR) under awards no. OSR-2018-CARF/CCF-3079, and OSR-4106 CPF2019 as well as EC FP7 Project SC2 (610115)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Universal, Highly Stable Dopant System for Organic Semiconductors Based on Lewis-Paired Dopant Complexes

  • Zapata Arteaga, Osnat
  • Perevedentsev, Aleksandr
  • Prete, Michela
  • Busato, Stephan
  • Floris, Paolo Sebastiano
  • Asatryan, Jesika
  • Rurali, Riccardo
  • Martín, Jaime
  • Campoy Quiles, Mariano
Chemical doping of organic semiconductors is an essential enabler for applications in electronic and energy-conversion devices such as thermoelectrics. Here, Lewis-paired complexes are advanced as high-performance dopants that address all the principal drawbacks of conventional dopants in terms of limited electrical conductivity, thermal stability, and generality. The study focuses on the Lewis acid B(C6F5)3 (BCF) and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) bearing Lewis-basic −CN groups. Due to its high electron affinity, BCF:F4TCNQ dopes an exceptionally wide range of organic semiconductors, over 20 of which are investigated. Complex activation and microstructure control lead to conductivities for poly(3-hexylthiophene) (P3HT) exceeding 300 and 900 S cm–1 for isotropic and chain-oriented films, respectively, resulting in a 10 to 50 times larger thermoelectric power factor compared to those obtained with neat dopants. Moreover, BCF:F4TCNQ-doped P3HT exhibits a 3-fold higher thermal dedoping activation energy compared to that obtained with neat dopants and at least a factor of 10 better operational stability., We thank Martin Kreuzer for extensive support and fruitful discussions at the Alba synchrotron BL01-MIRAS beamline. Jiali Guo and Dr. Edgar Gutierrez are also thanked for their support with the Alba experiments. We also thank Prof. Walter Caseri and Dr Marco D’Elia (Department of Materials, ETH Zürich) for generously contributing samples of poly(phenylene methylene)s as well as the many stimulating discussions. Dr Agustín Mihi (ICMAB-CSIC) is thanked for providing access to the Bruker IR spectrophotometry equipment. This work was financially supported by the European Commission through the Marie Skłodowska-Curie project HORATES (GA-955837), by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) under grants PID2020-119777GB-I00, PID2021-128924OB-I00 and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S (particularly, PALOMA grant within ICMAB’s ‘Frontier Interdisciplinary Projects’ (FIP-2021) Program), and by the Generalitat de Catalunya under grant no. 2017 SGR 1506. The work of PSF has been carried out within the PhD program in Physics of the Universitat Autònoma de Barcelona (UAB). We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid solar energy device for simultaneous electric power generation and molecular solar thermal energy storage

  • Wang, Zhihang
  • Hölzel, Helen
  • Fernandez, Lorette
  • Aslam, Adil S.
  • Baronas, Paulius
  • Orrego-Hernández, Jessica
  • Ghasemi, Shima
  • Campoy Quiles, Mariano
  • Moth-Poulsen, Kasper
The performance of photovoltaic (PV) solar cells can be adversely affected by the heat generated from solar irradiation. To address this issue, a hybrid device featuring a solar energy storage and cooling layer integrated with a silicon-based PV cell has been developed. This layer employs a molecular solar thermal (MOST) energy storage system to convert and store high-energy photons—typically underutilized by solar cells due to thermalization losses—into chemical energy. Simultaneously, it effectively cools the PV cell through both optical effects and thermal conductivity. Herein, it was demonstrated that up to 2.3% of solar energy could be stored as chemical energy. Additionally, the integration of the MOST system with the PV cell resulted in a notable decrease in the cell’s surface temperature by approximately 8°C under standard solar irradiation conditions. The hybrid system demonstrated a solar utilization efficiency of 14.9%, underscoring its potential to achieve even greater efficiencies in forthcoming advanced hybrid PV solar energy systems., This work was supported by the European Research Council (no. 101002131), the Swedish Energy Agency, the Göran Gustafsson Foundation, the Swedish Research Council (project. 2020-00686), Swedish Research Council Formas, the European Research Council (ERC) under grant agreement CoG, PHOTHERM—101002131, the Catalan Institute of Advanced Studies (ICREA), and the European Union’s Horizon 2020 Framework Programme under grant agreement no. 951801. The authors are very grateful to Dr. Pedro Ferreira for help on the indoor experiments test, Dr. Marti Gibert Roca for designing and manufacturing the holder with temperature control for PV measurements, and Miquel Casademont Viñas for introducing the solar simulator in the Institute of Materials Science of Barcelona. The Spanish Ministerio de Ciencia e Innovación (MICINN) is gratefully acknowledged for its support through grant no. CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER (UE) grant PID2021-128924OB-I00 (ISOSCELLES)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Slow vibrational relaxation drives ultrafast formation of photoexcited polaron pair states in glycolated conjugated polymers

  • Pagano, Katia
  • Kim, Jin Gwan
  • Luke, Joel
  • Tan, Ellasia
  • Stewart, Katherine
  • Sazanovich, Igor V.
  • Karras, Gabriel
  • Gonev, Hristo Ivov
  • Marsh, Adam V.
  • Kim, Na Yeong
  • Kwon, Sooncheol
  • Kim, Young Yong
  • Alonso Carmona, M. Isabel
  • Dörling, Bernhard
  • Campoy Quiles, Mariano
  • Parker, Anthony W.
  • Clarke, Tracey M.
  • Kim, Yun-Hi
  • Kim, Ji-Seon
Glycol sidechains are often used to enhance the performance of organic photoconversion and electrochemical devices. Herein, we study their effects on electronic states and electronic properties. We find that polymer glycolation not only induces more disordered packing, but also results in a higher reorganisation energy due to more localised π-electron density. Transient absorption spectroscopy and femtosecond stimulated Raman spectroscopy are utilised to monitor the structural relaxation dynamics coupled to the excited state formation upon photoexcitation. Singlet excitons are initially formed, followed by polaron pair formation. The associated structural relaxation slows down in glycolated polymers (5 ps vs. 1.25 ps for alkylated), consistent with larger reorganisation energy. This slower vibrational relaxation is found to drive ultrafast formation of the polaron pair state (5 ps vs. 10 ps for alkylated). These results provide key experimental evidence demonstrating the impact of molecular structure on electronic state formation driven by strong vibrational coupling., The authors are thankful for the opportunity and funding made available by the STFC and UKRI for access to the Central Laser Facility (App. #22130036) and would like to acknowledge all CLF staff who aided us with our measurements during our beamtime. The authors would like to thank Prof. James Durrant for insightful discussions and Dr. Sam Hillman for TAS analysis guidance. K.P., J.L., E.T., K.S., and J.S.K. acknowledge the UK EPSRC for studentships under DTG and the Processable Electronics Centre for Doctoral Training (EP/L016702/1). This research was also supported by the UK Department for Business, Energy and Industrial Strategy (BEIS) through the National Measurement System and the Val O’Donoghue PhD Scholarship at Imperial College London. J.L. and J.S.K acknowledge funding from the UK EPSRC ATIP Programme Grant (EP/T028513/1). Y.H.K., J.K. and N.Y.K. acknowledge National Research Foundation grant NRF (RS-2023-00301974) and NRF (RS-2024-00336766) for financial support. T.M.C. and H.I.G. would like to acknowledge support from the EPSRC (EP/N509577/1, EP/T517793/1). B.D., M.I.A. and M.C.Q. thank the financial support from the Spanish Ministry of Science and Innovation through projects PID2021-128924OB-I00 and CEX2019-000917-S (FUNFUTURE, Spanish Severo Ochoa Centre of Excellence program) and Generalitat de Catalunya (2021-SGR-00444)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Absence of Anomalous Electron–Phonon Coupling in the Near-Ambient Gap Temperature Renormalization of CsPbBr3 Nanocrystals

  • Fasahat, Shima
  • Schäfer, Benedikt
  • Xu, Kai
  • Nadesh Fiuza-Maneiro
  • Gómez Graña, Sergio
  • Alonso Carmona, M. Isabel
  • Polavarapu, Lakshminarayana
  • Goñi, Alejandro R.
29 pages, including 4 figures, a long table and 2 pages of Supporting Information, Metal halide perovskites exhibit a fairly linear increase of the bandgap with increasing temperature, when crystallized in a tetragonal or cubic phase. In general, both thermal expansion and electron-phonon interaction effects contribute equally to this variation of the gap with temperature. Herein, we have disentangled both contributions in the case of colloidal CsPbBr$_3$ nanocrystals (NCs) by means of photoluminescence (PL) measurements as a function of temperature (from 80 K to ambient) and hydrostatic pressure (from atmospheric to ca. 1 GPa). At around room temperature, CsPbBr$_3$ NCs also show a linear increase of the bandgap with temperature with a slope similar to that of the archetypal methylammonium lead iodide (MAPbI$_3$) perovskite. This is somehow unexpected in view of the recent observations in mixed-cation Cs$_x$MA$_{1-x}$PbI$_3$ single crystals with low Cs content, for which Cs incorporation caused a reduction by a factor of two in the temperature slope of the gap. This effect was ascribed to an anomalous electron-phonon interaction induced by the coupling with vibrational modes admixed with the Cs translational dynamics inside the cage voids. Thus, no trace of anomalous coupling is found in CsPbBr$_3$ NCs. In fact, we show that the linear temperature renormalization exhibited by the gap of CsPbBr$_3$ NCs is shared with most metal halide perovskites, due to a common bonding/antibonding and atomic orbital character of the electronic band-edge states. In this way, we provide a deeper understanding of the gap temperature dependence in the general case when the A-site cation dynamics is not involved in the electron-phonon interaction., The Spanish “Ministerio de Ciencia, Innovación y Universidades” (MICIU) through the Agencia Estatal de Investigación (AEI) is gratefully acknowledged for its support through grant CEX2023-001263-S (MATRANS42) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PID2020-117371RA-I00 (CHIRALPERO), PID2021-128924OB-I00 (ISOSCELLES), PID2022-141956NB-I00 (OUTLIGHT) and TED2021131628A-I00 (MACLEDS). The authors also thank the Catalan agency AGAUR for grant 2021SGR-00444 and the National Network “Red Perovskitas” (MICIU funded). S.F. acknowledges a FPI grant PRE2021-100097 from MICIU and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which she is enrolled. B.S. acknowledges the support of the Erasmus + programme of the European Union through the internship project 2022-1-DE01-KA131-HED-000055364 (STREAM 2022). L.P. acknowledges support from the Spanish MICIU through Ramón y Cajal grant (RYC2018-026103-I) and a grant from the Xunta de Galicia (ED431F2021/05). S.G.G. acknowledges support from project CNS2022-135531 (HARDTOP) funded by 14 MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sign of the Gap Temperature Dependence in CsPb(Br,Cl)3 Nanocrystals Determined by Cs-Rattler-Mediated Electron-Phonon Coupling

  • Fasahat, Shima
  • Fiuza-Maneiro, Nadesh
  • Schäfer, Benedikt
  • Xu, Kai
  • Gómez Graña, Sergio
  • Alonso Carmona, M. Isabel
  • Polavarapu, Lakshminarayana
  • Goñi, Alejandro R.
18 pages, 4 figures, 1 table, So far, the striking sign reversal in the near-ambient slope of the gap temperature dependence of colloidal CsPbCl3 perovskite nanocrystals (NCs) compared to its Br counterpart remains unresolved. Pure bromide NCs exhibit a linear gap increase with increasing temperature, to which thermal expansion and electron-phonon interaction equally contribute. In contrast, the temperature slope for the chlorine compound gap is clearly negative. By combining temperature- and pressure-dependent photoluminescence on a series of CsPb(Br1-xClx)3 NCs, we unravel the origin of such inversion. The electron-phonon interaction is solely responsible, undergoing a sudden change in sign and magnitude due to activation of an anomalous electron-phonon coupling mechanism linked to vibrational modes characterized by synchronous octahedral tilting and Cs rattling. This takes place in the shrunken orthorhombic NC lattice for Cl concentrations exceeding ca. 40%. We have thus clarified a puzzling result directly impacting the optoelectronic properties of lead halide perovskite NCs., The Spanish “Ministerio de Ciencia, Innovación y Universidades” (MICIU) through the Agencia Estatal de Investigación (AEI) is gratefully acknowledged for its support through grant CEX2023-001263-S (MATRANS42) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PID2020-117371RA-I00 (CHIRALPERO), PID2021-128924OB-I00 (ISOSCELLES), PID2022-141956NB-I00 (OUTLIGHT) and TED2021-131628A-I00 (MACLEDS). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444 and the National Network ”Red Perovskitas” (MICIU funded). S.F. acknowledges a FPI grant PRE2021-100097 from MICIU and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which she is enrolled. B.S. acknowledges the support of the Erasmus+ programme of the European Union through the internship project 2022-1-DE01-KA131-HED-000055364 (STREAM 2022). L.P. acknowledges support from the Spanish MICIU through Ramón y Cajal grant (RYC2018-026103-I) and a grant from the Xunta de Galicia (ED431F2021/05). S.G.-G. acknowledges support from project CNS2022-135531 (HARDTOP) funded by 14 MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructural Evolution Dominates the Changes in theThermal Conductivity of Conjugated Polymers Upon Doping

  • Guo, Jiali
  • Xu, Kai
  • Asatryan, Jesika
  • Alonso Navarro, Matías Jesús
  • Zapata Arteaga, Osnat
  • Craighero, Mariavittoria
  • Perevedentsev, Aleksandr
  • Kroon, Renee
  • Ramos, María Mar
  • Segura, José L.
  • Martín, Jaime
  • Müller, Christian
  • Reparaz, J. Sebastian
  • Campoy Quiles, Mariano
In this study, the correlation between the changes in microstructure of conjugated polymers upon doping and their concomitant thermal transport properties is elucidated. Eight conjugated polymers across distinct doping systems are examined: molecular dopants, Lewis acid type dopants, and ion-exchange systems. These findings indicate that, upon doping, there is a decrease in out-of-plane thermal conductivity for five polymers characterized by high structural order, such as those based on thiophene, diketopyrrolopyrrole, and terthiophene-naphthalimide copolymers. Conversely, for polymers with less ordered structures, including regioregular poly(3-hexylthiophene) and thiophene-based polymers with oligoether side chains, an increase in out-of-plane thermal conductivity is observed. To elucidate these trends, several hypotheses are examined: i) enhanced intrinsic thermal anisotropy originating from backbone orientation, ii) variations in the crystalline to amorphous fraction, and (iii) alloying effects resulting from dopant incorporation. Grazing incidence wide-angle X-ray scattering reveals that in-plane alignment exerts a direct influence on both in-plane and out-of-plane thermal conductivities. Photooxidation experiments provide further insights into the role of alloy scattering. Ultimately, the in-plane thermoelectric figure of merit is ascertained for two diketopyrrolopyrrole-based polymers, underscoring the critical importance of measuring thermal and electrical properties in the same orientation to ensure precise thermoelectric evaluation., The authors acknowledge funding from the European Union's Horizon 2020 research and innovation programme through the Marie Skłodowska-Curie grant agreement no. 955837 (HORATES). The authors acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades and the for its support through Grant CEX2023- in the framework of the Spanish Severo Ochoa Centre of Excellence, and Grants PID2021-128924OB-I00, PID2020-119777GB-I00 (THERM2MAIN), PID2022-138908NB-C33, and PDC2021-121814-I00 (COVEQ). The authors also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan agency AGAUR. The authors acknowledge Dr. Bernhard Dörling for support with thermoelectric measurements and Dr. Agustín Mihi as well as ICMAB-CSIC for access to and support with the FTIR equipment. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which J. G. was enrolled. The authors acknowledge support for the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the impact of selective donor:acceptor structural ordering in PBDB-T:ITIC organic solar cells

  • Rodríguez Martínez, Xabier
  • Marina, Sara
  • Harillo Baños, Albert
  • Campoy Quiles, Mariano
  • Martin, Jaime
The bulk heterojunction (BHJ) is the standard configuration of the photoactive layer in single-junction organic solar cells. Therein, electron-rich (a donor polymer) and electron deficient (a small molecule acceptor) organic semiconductors are intimately blended to form a complex 3D network of crystallites and vitrified regions that altogether determine the final device performance. Studying the relationship between said performance and the structural order achieved in the photoactive materials individually is desirable to discern the underlying structure-function relationship in organic solar cells, hence isolating, with no ambiguities, the role played by the structural order achieved in the donor and acceptor domains themselves on the device performance. This work precisely tackles the archetypal PBDB-T:ITIC blend to demonstrate how the structural order of the donor and acceptor fractions in the BHJ can be selectively tailored through an adequate selection of co-solvents during the film formation process. When using chloroform as unique solvent, both components exhibit a low degree of order in the BHJ. Conversely, the use of ortho-xylene yields BHJs in which PBDB-T shows enhanced structural order. Furthermore, the addition of 1,8-diiodooctane as co-solvent is found to spark the crystallization of ITIC without effect on the degree of order of PBDB-T, resulting in downgraded photovoltaic performance. Overall, BHJs in which ITIC remains in its vitrified state are beneficial, in which case the structural order achieved by PBDB-T has little to no effect. Notwithstanding, BHJs that contain ordered materials (donor and/or acceptor) show virtually no degradation after more than 3.5 years of shelf storage. This study, thus, pinpoints to (i) the microstructure attained by the acceptor domains and (ii) the presence of crystalline domains of either type (donor and/or acceptor) as the main determinants of the maximum achievable performance and the shelf stability of organic solar cells, respectively., J. M. and S. M. thank financial support from the MICIU (PID2021-126243NB-I00). J. M. and X. R.-M. acknowledge funding from the European Research Council (Grant 101086805). GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. M. C.-Q. and A. H.-B. acknowledge support by the MICIU/AEI/10.13039/501100011033 for the “Severo Ochoa” program for Centres of Excellence CEX2023-001263-S and grants PID2021-128924OB-I00 and TED2021-131911B-I00. The authors acknowledge Universidade da Coruña/CISUG for the funding received for open access charge., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wide bandgap organic solar cells with improved photovoltaic performance via solid additive integration

  • Capdevila, Joan
  • Waiprasoet, Saran
  • Capella Guardià, Francesc Xavier
  • Ruiz Herrero, Carmen
  • Hirsch, Lionel
  • Campoy Quiles, Mariano
  • Wantz, Guillaume
  • Pattanasattayavong, Pichaya
  • Chambon, Sylvain
  • Gueunier-Farret, Marie-Estelle
Wide bandgap (WBG) and high-voltage organic solar cells (OSC) are of high interest for applications such as top cell in multijunction structures and indoor photovoltaic. In this study, an inverted WBG OSC is optimized through a synergistic approach integrating material design and a solid additive strategy. The initial active layer is composed of a blend of the WBG donor polymer PBDB-T-2F (PM6) with a WBG non-fullerene acceptor (NFA) GS-ISO. After optimization of the process, including thermal annealing of the active layer and incorporation of processing additives, a power conversion efficiency (PCE) of 7.4% is reached. It is shown that the introduction of a conjugated polymer, F8T2, in small quantities (<1% wt), further improves the photovoltaic performance. Indeed, the effects of enhanced absorption through improved intermolecular packing result in a high open-circuit voltage (V-OC) of 1.20 V and a fill factor (FF) of 0.68, leading to a PCE of 10% for the champion cell under 1 sun. Such a WBG cell is particularly suitable to be integrated as top cell in a full-OSC lateral multijunction architecture and we show theoretical achievable efficiencies up to 14% and values of increase-over-best-cell (IoBC) up to 21%. Beyond multijunction applications, WBG materials are also of particular interest in the development of efficient indoor photovoltaic devices, and the cells developed in this work were proven to reach efficiencies up to 16% under 1000 lx illumination., The authors acknowledge the support of the ANR French national funding agency for the funding of the ORGANIST project ANR-22-CE05-0025 (2023–2026). The authors would like to thank Arnaud Hemmerle from the French National Synchrotron Radiation facility SOLEIL, in Saint-Aubin, for GIWAXS measurements. Francesc Xavier Capella Guardià and Mariano Campoy-Quiles acknowledge financial support from MCIN/AEI/10.13039/501100011033/and the European Union (FEDER) through grants PID2021-128924OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which F. X. Capella Guardià is enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interconnected donor-acceptor-additive effects on the microstructure and device performance of PM6 : Y6 solar cells

  • Gutiérrez-Fernández, Edgar
  • Harillo Baños, Albert
  • Solano, Eduardo
  • Bikondoa, Oier
  • Gutierrez, Junkal
  • Tercjak, Agnieszka
  • Campoy Quiles, Mariano
  • Riera Galindo, Sergi
  • Martín, Jaime
The microstructure of the donor and acceptor materials within a bulk heterojunction is critical to the performance of organic solar cells, significantly influencing charge generation, transport, and overall efficiency and stability. Here, we studied the role of the donor : acceptor ratio and the use of additives on the resulting microstructure in films and devices based on PM6 : Y6. A detailed study of the resulting structures, mainly by X-ray scattering, indicates that the molecular arrangement leading to higher efficiencies is correlated with the presence of a single, well-mixed phase. In this phase, the diffusion of the Y6 molecules is constrained within the PM6 matrix. Interestingly, this microstructure can be achieved either by tuning the composition or by incorporating a solvent additive. Consequently, either approach can be employed to enhance photovoltaic performance., J. M and E. G-F. acknowledge support from the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN-01-2018-2020 “LION-HEARTED”, grant agreement no. 828984. J. M. thanks MICINN for the grant Ref. PID2021-126243NB-I00 and the European Research Council ERC-CoG with reference 101086805. We also acknowledge Ana Martinez Amesti, technician in Electron Microscopy at UPV/EHU, and the teams of the NCD-SWEET beamline at ALBA synchrotron and the XMaS/BM28 beamline at the European Synchrotron. XMaS is a UK national research facility supported by EPSRC. S. R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement no. 101025608, IDEAL. The authors also thank the financial support of the Spanish Ministerio de Ciencia, Innovación y Universidades, under Grants PID2021-128924OB-I00, TED2021-131911B-I00, and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

What Makes Thickness-Tolerant Organic Solar Cells?

  • Rodríguez Martínez, Xabier
  • Tormann, Constantin
  • Sanz Lleó, Marta
  • Dörling, Bernhard
  • Gibert Roca, Martí
  • Harillo Baños, Albert
  • Torimtubun, Alfonsina Abat Amelenan
  • Pascual San José, Enrique
  • Jurado, José Piers
  • López Mir, Laura
  • Kemerink, Martijn
  • Campoy Quiles, Mariano
Relatively thick-film organic photovoltaics (OPVs) are desirable to spark commercialization through mass-printing methods. Thickness-resilient donor:acceptor blends are, however, scarce and not fully understood. The interplay between electronic, optical, and microstructural properties of the photoactive layer (PAL) generates a multi-parametric space where rationalization is far from trivial. In this work, high-throughput experimentation, simulations, and machine learning (ML) methods are leveraged to provide material and device insights toward thickness-resilient OPVs. From a database of 720 inverted devices and 20 different donor:acceptor blends, two main blend families are identified in terms of their resilience against increased PAL thickness (>200 nm). These are archetypically represented by PBDB-T:ITIC (thickness-sensitive) and PTQ10:Y6 (thickness-resilient). Kinetic Monte Carlo (kMC) simulations elucidate that the blend morphology alone, either in the form of an effective medium or energy cascade, can explain the experimental short-circuit current density and open-circuit voltage trends without tweaking the recombination parameters (cf. drift-diffusion, DD). High fill factors (FFs) in thick-film devices cannot, however, be reproduced by the kMC or DD simulations. ML models show that complementary absorbing donors and acceptors (shifted absorption onsets) mixed in balanced weight ratios provide a favorable hole back-transfer efficiency to increase the FF in thick-film devices., The authors acknowledge Prof. Martin Heeney and Dr. Zhuping Fei for the synthesis of ITIC-C8 and ITIC-C2C6 in a previous work. This work was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades under Grants PID2021-128924OB-I00, TED2021-131911B-I00 and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence. The authors acknowledge financial support from the European Research Council through project ERC CoG 648901. This work was supported by the MADRAS project funded by the European Union Horizon 2020 research and innovation program under grant agreement No. 862492. X.R.M. acknowledges the Alexander von Humboldt Foundation for funding. J.P.J. has received financial support through the “la Caixa” INPhINIT Fellowship Grant (Grant code: LCF/BQ/IN17/11620035). M.K. thanks the Carl Zeiss Foundation for financial support. The authors thank all past and present FOREMATICS for fruitful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Increasing polymer molecular weight enables low-donor-content, efficient and scalable semi-transparent organic solar cells

  • Martín Ruiz, Martín
  • Pinyol Castillo, Paula
  • Rodríguez Martínez, Xabier
  • Martín, Jaime
  • Burgués Ceballos, Ignasi
  • Campoy Quiles, Mariano
The advent of non-fullerene acceptors has enabled high efficiencies in organic photovoltaics (OPVs). The active layer of such devices typically consists of a narrow-bandgap molecular acceptor (A), with strong light absorption in the near-infrared region, combined with a polymer donor (D) that harvests visible photons. Reducing the donor content is a good strategy to increase transparency, but often leads to lower power conversion efficiencies (PCEs) due to loss in absorption efficiency and, importantly, a worsening of the electrical properties. Here, we tackle this compromise by investigating if the improved electrical properties granted by high polymer molecular weight (Mw) can simultaneously result in a high PCE and high visible transparency, thus leading to efficient semitransparent OPVs. We investigate the polymer : non-fullerene blend PTB7-Th : IEICO-4F as a function of blend ratio for two polymer Mw values. We show that increasing the PTB7-Th Mw from 57 kDa to 125 kDa promotes a film morphology that enhances charge carrier mobility. Moreover, we demonstrate that using high-Mw PTB7-Th enables high PCEs in blends with as low a polymer content as 28%. Interestingly, we find that this behaviour can be explained by improved percolation (granted by higher Mw) and higher acceptor crystallinity. In order to assess the scalability of the system, we compared devices fabricated in nitrogen or in air, and investigated the use of xylene as a greener solvent, the effect of increasing the cell area, the use of semitransparent electrodes and the fabrication of modules, identifying cell area as the most critical factor that negatively impacts PCE. Finally, we show the generality of the concept by extending it to two other polymers and two other acceptor molecules., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence, and the Ramon y Cajal program (RYC2022-035399-I). P. P.-C. thanks Eurecat for the “Vicente López” PhD grant. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA Synchrotron (experiment ID AV-2024098865) with the collaboration of ALBA staff. X. R.-M. and J. M. are grateful for financial support from the European Research Council (Grant No. 101086805). We also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan Agency AGAUR. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which M. M.-R. is enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular factors controlling charge pair generation in organic photovoltaic materials

  • Hart, Lucy J.F.
  • Medranda, Daniel G.
  • Yuan, Shi Wei
  • Lindh, Linnea
  • Müller, Jolanda S.
  • Yang, Hanbo
  • Gerard, Hugo
  • Zhao, Tianyu
  • Quesada Ramírez, Arianna
  • Campoy Quiles, Mariano
  • Azzouzi, Mohammed
  • Eisner, Flurin D.
  • Nelson, Jenny
Through remarkable advances in materials design, the efficiency of photovoltaic energy conversion in molecular materials has risen from 1% to over 20% within 2 decades. Some recent reports argue that charge photogeneration can occur directly in neat films of the best-performing molecular materials, and that this process may assist current generation in heterojunction devices. Here we address this assertion by combining experimental measurements of charge generation in single-component and heterojunction devices with a computational model of the generation and evolution of delocalized excited states in such systems. We identify key molecular parameters that are likely to assist charge generation in high-performance materials, including the exciton binding energy, reorganization energy, energetic disorder, electronic coupling and the molecular packing motif. We show that including state delocalization is critical to the results. While we find that charge generation in single domains is unlikely to drive photocurrent generation in low-offset heterojunctions, the same molecular parameters favour charge generation in both device architectures., L.J.F.H., J.S.M., L.L. and J.N. thank the EPSRC ATIP project (EP/TO28513/1). J.N. also thanks the UKRI for project EP/Z533361/1 POTENtIAl under the ERC underwrite scheme. J.N., M.A., F.D.E., D.G.M. and S.W.Y. acknowledge funding from the Horizon 2020 Framework Program via an ERC Advanced Grant (no. 742708). J.S.M., D.G.M. and L.J.F.H. have received support via the Royal Society. L.J.F.H thanks the EPSRC for award of a Doctoral Prize Fellowship. J.N. thanks the Royal Society for the award of a Research Professorship. M.A. acknowledges the support of Eric and Wendy Schmidt AI in Science Postdoctoral Fellowship, a Schmidt Sciences programme. We acknowledge support from CSIC through the JAE Chair programme via the DOMMINO project. M.C.-Q. and A.Q.-R acknowledge support from MICIU/AEI/10.13039/501100011033 for the ‘Severo Ochoa’ programme for Centres of Excellence CEX2023-001263-S and grant no. PID2021-128924OB-I00., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the glassy phase in polymer semiconductors tunes their optical properties

  • Ramos, Nicolas
  • Asatryan, Jesika
  • Lisio, Valerio Di
  • Campoy Quiles, Mariano
  • Martin, Jaime
  • Cangialosi, Daniele
Active layers in organic electronic devices often contain extensive glassy (non-crystalline) regions whose roles remain largely uncharted compared to their crystalline counterparts. Here, we demonstrate that the thermodynamic state of these glassy phases constitutes a powerful lever for tuning the optoelectronic properties of polymer semiconductors. Using poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PFO) as a model system, we show that controlled vitrification kinetics and formation from distinct liquid precursors-including isotropic and liquid-crystalline mesophases-yield glassy PFO films with markedly different microstructures and photoluminescence characteristics. These results uncover direct correlations between glass formation pathways and functional electronic behavior, establishing the glassy state as an active design parameter rather than a passive structural byproduct. Our findings thus introduce a paradigm shift in the processing-structure-property relationships of polymer semiconductors and open new avenues for glass-phase engineering toward enhanced efficiency and stability in next-generation optoelectronic devices., We thank De Mello’s group for kindly providing the PFO material. J.M. thanks financial support from the MICIU (Grant Agreement PID2021-126243NB-I00), the European Research Council (Grant 101086805) and Xunta de Galicia through the Convenio-ERC program. M.C.Q. acknowledge financial support from MCIN/ AEI /10.13039/501100011033/ and the European Union (FEDER) through grants PID2021-128924OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Center of Excellence. D.C. thanks the financial support from Eusko Jaurlaritza (Basque Government) through the grant IT-1566-22., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-throughput thickness gradient screening reveals thickness and light-intensity dependent efficiency in indoor organic photovoltaics

  • Saeed, Muhammad Ahsan
  • Swennen, Giel
  • Prada Cortés, Marián
  • Capella Guardià,Francesc Xavier
  • Casademont Viñas, Miquel
  • Rodríguez Martínez, Xabier
  • Martín, Jaime
  • Vandewal, Koen
  • Campoy Quiles, Mariano
Indoor organic photovoltaics (OPVs) are promising power sources for Internet-of-Things devices, but optimizing performance under diverse indoor lighting is challenging because the optimal thickness of the active layer depends the competition between charge transport and recombination, as well as on the incident light spectrum in a complex manner. Here, we use a high-throughput customized blade-coating system to generate continuous active-layer thickness gradients (50-450 nm) for five binary blends comprising three wide-bandgap donors (PTQ10, PM6, D18) and three non-fullerene acceptors (o-IDFBR, eh-IDTBR, FCC-Cl).Devices were characterized under four LED spectra (2700 K, 5200 K, 6500 K, B4) using a spectrum-on-demand source. Across 600 devices, intermediate thicknesses maximize shunt resistance (R P ) and fill factor, whereas thin and thick layers suffer from leakage and recombination. PTQ10:FCCl shows broad thickness tolerance (≈230-410 nm) and moderate spectral stability, with PCE varying by only ≈2.6% across indoor spectra and reaching a maximum of ≈21.7% under 2700 K. Conversely, PM6:FCCl attains higher PCE (≈26.4%) but is strongly thickness-sensitive, with peak efficiency realized within a narrow range (~305 nm) and varying by ≈15% across all four spectra. Analysis of intensity-and thickness-dependent charge transport indicates that performance is governed by photon absorption, spectral overlap and insufficient R P . This work demonstrates a rapid screening method and highlights the importance of thickness-and spectrum-optimized active layers for efficient indoor OPVs., This work was funded by the European Commission through the Marie Skłodowska-Curie project HOPES (101104491). The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/ AEI /10.13039/501-100011033/) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence. The authors would like to thank Prof. Alejandro Goñi (ICMAB-CSIC) and Dr. Sergi Riera (ICMAB-CSIC) for useful discussions. We are also thankful to the Scanning Probe Microscopy Service of ICMAB-CSIC (Dr. Laura Rodríguez) for conducting AFM measurements. FXCG thanks Digital Surf for providing MountainsLab® Premium software, which was used for the analysis and visualization of AFM data. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. J.M. thanks financial support from European Research Council (Grant No. 101086805)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Increasing polymer molecular weight enables low-donor-content, efficient and scalable semi-transparent organic solar cells

  • Martín Ruiz, Martín|||0009-0006-9755-3913
  • Pinyol Castillo, Paula|||0000-0002-4927-3371
  • Rodríguez Martínez, Xabier|||0000-0002-6715-4392
  • Martín, Jaime|||0000-0002-9669-7273
  • Burgués Ceballos, Ignasi|||0000-0002-8183-0705
  • Campoy Quiles, Mariano
The advent of non-fullerene acceptors has enabled high efficiencies in organic photovoltaics (OPVs). The active layer of such devices typically consists of a narrow-bandgap molecular acceptor (A), with strong light absorption in the near-infrared region, combined with a polymer donor (D) that harvests visible photons. Reducing the donor content is a good strategy to increase transparency, but often leads to lower power conversion efficiencies (PCEs) due to loss in absorption efficiency and, importantly, a worsening of the electrical properties. Here, we tackle this compromise by investigating if the improved electrical properties granted by high polymer molecular weight (Mw) can simultaneously result in a high PCE and high visible transparency, thus leading to efficient semitransparent OPVs. We investigate the polymer : non-fullerene blend PTB7-Th : IEICO-4F as a function of blend ratio for two polymer Mw values. We show that increasing the PTB7-Th Mw from 57 kDa to 125 kDa promotes a film morphology that enhances charge carrier mobility. Moreover, we demonstrate that using high-Mw PTB7-Th enables high PCEs in blends with as low a polymer content as 28%. Interestingly, we find that this behaviour can be explained by improved percolation (granted by higher Mw) and higher acceptor crystallinity. In order to assess the scalability of the system, we compared devices fabricated in nitrogen or in air, and investigated the use of xylene as a greener solvent, the effect of increasing the cell area, the use of semitransparent electrodes and the fabrication of modules, identifying cell area as the most critical factor that negatively impacts PCE. Finally, we show the generality of the concept by extending it to two other polymers and two other acceptor molecules., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence, and the Ramon y Cajal program (RYC2022-035399-I). P. P.-C. thanks Eurecat for the “Vicente López” PhD grant. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA Synchrotron (experiment ID AV-2024098865) with the collaboration of ALBA staff. X. R.-M. and J. M. are grateful for financial support from the European Research Council (Grant No. 101086805). We also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan Agency AGAUR. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which M. M.-R. is enrolled.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Increasing polymer molecular weight enables low-donor-content, efficient and scalable semi-transparent organic solar cells

  • Martín Ruiz, Martín
  • Pinyol Castillo, Paula
  • Rodríguez Martínez, Xabier
  • Martín, Jaime
  • Burgués Ceballos, Ignasi
  • Campoy Quiles, Mariano
The advent of non-fullerene acceptors has enabled high efficiencies in organic photovoltaics (OPVs). The active layer of such devices typically consists of a narrow-bandgap molecular acceptor (A), with strong light absorption in the near-infrared region, combined with a polymer donor (D) that harvests visible photons. Reducing the donor content is a good strategy to increase transparency, but often leads to lower power conversion efficiencies (PCEs) due to loss in absorption efficiency and, importantly, a worsening of the electrical properties. Here, we tackle this compromise by investigating if the improved electrical properties granted by high polymer molecular weight (Mw) can simultaneously result in a high PCE and high visible transparency, thus leading to efficient semitransparent OPVs. We investigate the polymer : non-fullerene blend PTB7-Th : IEICO-4F as a function of blend ratio for two polymer Mw values. We show that increasing the PTB7-Th Mw from 57 kDa to 125 kDa promotes a film morphology that enhances charge carrier mobility. Moreover, we demonstrate that using high-Mw PTB7-Th enables high PCEs in blends with as low a polymer content as 28%. Interestingly, we find that this behaviour can be explained by improved percolation (granted by higher Mw) and higher acceptor crystallinity. In order to assess the scalability of the system, we compared devices fabricated in nitrogen or in air, and investigated the use of xylene as a greener solvent, the effect of increasing the cell area, the use of semitransparent electrodes and the fabrication of modules, identifying cell area as the most critical factor that negatively impacts PCE. Finally, we show the generality of the concept by extending it to two other polymers and two other acceptor molecules., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501-100011033/) in the framework of the Agencia Estatal de Investigación's Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia under the call Strategic Projects 2022 through project SYNATRA (PLEC2022-009323) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence, and the Ramon y Cajal program (RYC2022-035399-I). P. P.-C. thanks Eurecat for the “Vicente López” PhD grant. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA Synchrotron (experiment ID AV-2024098865) with the collaboration of ALBA staff. X. R.-M. and J. M. are grateful for financial support from the European Research Council (Grant No. 101086805). We also acknowledge Grant 2021-SGR-00444 (NANOPTO) from the Catalan Agency AGAUR. This work has been carried out within the framework of the doctoral program in Material Science at the Universitat Autònoma de Barcelona in which M. M.-R. is enrolled., Postprint (published version)