Pasar al contenido principal

ESTRUCTURAS FOTONICAS PARA MEJORAR EL ACOPLAMIENTO DE LUZ AL EXTERIOR EN DIODOS EMISORES DE LUZ

PID2022-141956NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Chiral plasmonic superlattices from template-assisted assembly of achiral nanoparticles

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Mendoza-Carreño, Jose|||0000-0001-8650-9913
  • Garriga, Miquel|||0000-0002-6683-0790
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Mihi, Agustín|||0000-0003-3821-7881
The creation of chiral plasmonic architectures combining templates with achiral plasmonic particles leads to strong chiroptical responses that can be finely tuned via the characteristics of the colloidal building blocks. Here we show how elastomeric molds, pre-patterned with a hexagonal array of triskelia motifs, can guide the assembly of ordinary noble metal colloids into chiral plasmonic architectures with strong dichroism values. Under normal incidence, the chiral arrays made with gold and silver colloids showed g-factors of 0.18 and 0.4, respectively. In all cases, increasing the size of the colloid allows tuning the optical properties of the structure in the VIS-NIR range. When a superstrate layer is deposited onto the structures, the extrinsic chirality response of the 2D superlattice is revealed and strongly amplified by the chiral motifs under oblique inspection, leading to g-factors of ± 1.2 at ± 14°. Finally, these chiral plasmonic resonances sustained by the triskelion array are used to produce circularly polarized photoluminescence from achiral organic dyes placed on top with up to 20% of dissymmetry.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Symmetric Metal Organic Framework-Plasmonic Architectures for Reversible and High-Sensitivity Optical Sensing

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Meng, Lingxin
  • Imaz, Inhar|||0000-0002-0278-1141
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Mihi, Agustín|||0000-0003-3821-7881
Plasmonic nanostructures have attracted considerable interest for their ability to manipulate light at the nanoscale. The optical response of these metallic architectures is greatly sensitive to changes in their surrounding environment, which makes them particularly interesting for sensing applications. Here, we report a versatile and highly sensitive plasmonic sensing platform that combines the surface lattice resonances (SLRs), sustained by 2D gratings of metal nanoparticles, and the exceptional refractive index tunability offered by ZIF-8 metal-organic framework (MOF) films. The SLRs provide narrow resonances that strongly depend on the surrounding refractive index, which can be modulated via solvent exchange in the ZIF-8. The plasmonic 2D arrays were fabricated using templated-assisted assembly of metal colloids; a scalable and gentle process that enabled the study of different ZIF-8/grating configurations. First, we studied ZIF-8 films on top of the 2D arrays, where an optimized concentration of the colloidal dispersion allowed dynamic and reversible ON/OFF tuning of the SLR response. Second, we explored the role of the refractive index mismatch between substrate and ZIF-8 superstrate. Finally, we fabricated 2D plasmonic gratings completely embedded within ZIF-8 layers, achieving enhanced sensing performance with a refractive index sensitivity of 427 ± 19 nm·RIU . These results highlight the potential of MOF-plasmonic hybrids as responsive and tunable nanophotonic platforms for next-generation optical sensing applications.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Inducing efficient and multiwavelength circularly polarized emission from perovskite nanocrystals using chiral metasurfaces

  • Fiuza Maneiro, Nadesh
  • Mendoza Carreño, Jose
  • Gómez Graña, Sergio
  • Alonso, Maria Isabel
  • Polavarapu , Lakshminarayana
  • Mihi, Agustín
Chiral nano‐emitters have recently received great research attention due to their technological applications and the need for a fundamental scientific understanding of the structure‐property nexus of these nanoscale materials. Lead halide perovskite nanocrystals (LHP NCs) with many interesting optical properties have anticipated great promise for generating chiral emission. However, inducing high anisotropy chiral emission from achiral perovskite NCs remains challenging. Although chiral ligands have been used to induce chirality, their anisotropy factors (g lum ) are low [10 −3 to 10 −2 ]. Herein, the generation of high anisotropy circularly polarized photoluminescence (CPL) from LHP NCs is demonstrated using chiral metasurfaces by depositing nanocrystals on top of prefabricated resonant photonic structures (2D gammadion arrays). This scalable approach results in CPL with g lum to a record high of 0.56 for perovskite NCs. Furthermore, the differences between high‐index dielectric chiral metasurfaces and metallic ones are explored for inducing chiral emission. More importantly, the generation of simultaneous multi‐wavelength circularly polarized light is demonstrated by combining dielectric and metallic chiral metasurfaces., Agencia Estatal de Investigación | Ref. PID2022-141956NB-I00, Agencia Estatal de Investigación | Ref. CEX2023-001263-S, Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Xunta de Galicia | Ref. ED431F2021/05, Universidade de Vigo/CISUG, Generalitat de Catalunya | Ref. 2021‐SGR‐00444, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. RYC2018-026103-I
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inducing Efficient and Multiwavelength Circularly Polarized Emission From Perovskite Nanocrystals Using Chiral Metasurfaces

  • Fiuza-Maneiro, Nadesh
  • Mendoza Carreño, José
  • Gómez Graña, Sergio
  • Alonso Carmona, M. Isabel
  • Polavarapu, Lakshminarayana
  • Mihi, Agustín
Chiral nano-emitters have recently received great research attention due to their technological applications and the need for a fundamental scientific understanding of the structure-property nexus of these nanoscale materials. Lead halide perovskite nanocrystals (LHP NCs) with many interesting optical properties have anticipated great promise for generating chiral emission. However, inducing high anisotropy chiral emission from achiral perovskite NCs remains challenging. Although chiral ligands have been used to induce chirality, their anisotropy factors (glum) are low [10-3 to 10-2]. Herein, the generation of high anisotropy circularly polarized photoluminescence (CPL) from LHP NCs is demonstrated using chiral metasurfaces by depositing nanocrystals on top of prefabricated resonant photonic structures (2D gammadion arrays). This scalable approach results in CPL with glum to a record high of 0.56 for perovskite NCs. Furthermore, the differences between high-index dielectric chiral metasurfaces and metallic ones are explored for inducing chiral emission. More importantly, the generation of simultaneous multi-wavelength circularly polarized light is demonstrated by combining dielectric and metallic chiral metasurfaces., N.F.M. and J.M.C. contributed equally to this work. This work had received funding from the Spanish Agencia Estatal de Investigación (AEI/MCIN) through grants, PID2022-141956NB-I00 MCIN/AEI/10.13039/501100011033 (OUTLIGHT), and CEX2023-001263-S (Spanish Severo Ochoa Centre of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). J.M.C. acknowledges an FPI fellowship (PRE2020-09411) from MICINN co-financed by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona UAB. L.P. acknowledges support from the Spanish Ministerio de Ciencia e Innovación through Ramón y Cajal grant (grant no. RYC2018-026103-I), the Spanish State Research Agency (grant nos. PID2020-117371RA-I00 and TED2021-131628A-I00), funded by MICIU/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR, and a grant from the Xunta de Galicia (grant no. ED431F2021/05). S.G.G. acknowledge support by the project CNS2022-135531 (funded by MICIU/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR). This research was also supported by the EIC PATHFINDER CHALLENGES project 101162112 (RADIANT), funded by the European Union. Funding for open access by the Universidade de Vigo/CISUG., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A single nanophotonic platform for producing circularly polarized white light from non-chiral emitters

  • Mendoza Carreño, José
  • Bertucci, Simone
  • Garbarino, Mauro
  • Cirignano, Matilde
  • Fiorito, Sergio
  • Lova, Paola
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Stasio, Francesco di
  • Mihi, Agustín
Direct manipulation of light spin-angular momentum is desired in optoelectronic applications such as, displays, telecommunications, or imaging. Generating polarized light from luminophores avoids using optical components that cause brightness losses and hamper on-chip integration of light sources. Endowing chirality to achiral emitters for direct generation of polarized light benefits from existing materials and can be achieved by chiral nanophotonics. However, most chiral nanostructures operate in narrow wavelength ranges and involve nanofabrication processes incompatible with high-throughput production. Here, a single nanophotonic architecture is designed to sustain chiroptical resonances along the visible spectrum. This platform, fabricated with scalable soft-nanoimprint lithography transfers its chirality to conventional emitters (CdSe/CdS nanoplatelets, CdSe/CdS quantum dots, CsPbBr3, CsPbI3 perovskite nanocrystals and F8BT) placed atop, achieving a high dissymmetry emission factor (glum > 1). The dynamics study suggests enhanced out-coupling efficiency for one helicity by the photonic structure. Finally, a white light-emitting blend containing different emitters shows simultaneous dissymmetric emission values along the visible spectrum with this chiral nanophotonic platform., This work has received funding from the Spanish Agencia Estatal de Investigación (AEI/MCIN) through grants, PID2022-141956NB-I00 MCIN/AEI/10.13039/501100011033(OUTLIGHT), and CEX2023-001263-S (Spanish Severo Ochoa Centre of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). This research was also supported by the EIC PATHFINDER CHALLENGES project 101162112 (RADIANT), funded by the European Union. J.M.C. acknowledges an FPI fellowship (PRE2020-09411) from MICINN co-financed by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona UAB. S.B., M.C., S.F., and F.D.S. acknowledge support by the European Research Council via the ERC-StG “NANOLED” (Grant 851794). M.G. and F.D.S. acknowledge support by the European Innovation Council via the Pathfinder OPEN “TWISTEDNANO” (Grant 101046424). S.B. also acknowledges Dorwal Marchelli for his insight on spectroscopy measurements and Simone Lauciello for the HR-SEM images., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-refractive-index 2D photonic structures for robust low-threshold multiband lasing

  • Conde Rubio, Ana
  • Deop-Ruano, Juan R.
  • Cerdán, L.
  • Manjavacas, Alejandro
  • Mihi, Agustín
High-refractive-index (HRI) dielectrics are gaining increasing attention as building blocks for compact lasers. Their ability to simultaneously support both electric and magnetic modes provides greater versatility as compared to plasmonic platforms. Moreover, their reduced absorption loss minimizes heat generation, further enhancing their performance. Here, we employ a scalable soft nanoimprinting lithography method to create a series of two-dimensional (2D) periodic square hole arrays in polymeric films (SU-8), which are coated with an HRI dielectric layer (TiO2). These structures exhibit low-threshold lasing from an organic dye-doped SU-8 layer deposited on top. We study arrays with different lattice parameters and a sample with a random distribution of holes, finding that the optimal laser performance occurs when the optical resonances of the array align with the emission wavelength range of the dye. Furthermore, we observe that the anisotropy in the TiO2 coating breaks the polarization degeneracy of the square arrays, leading to the emergence of new modes and enabling the simultaneous appearance of multiple lasing peaks. Our work shows that, despite the simplicity of their fabrication process, the HRI structures studied here exhibit a high degree of complexity, leading to a rich optical response and enabling multiband lasing. This offers an innovative approach to building robust HRI platforms for lasing with improved control over their emission properties., This project has received funding from the EIC PATHFINDER OPEN project 101046489 (DYNAMO), funded by the European Union. This research was also supported by the Spanish Agencia Estatal de Investigación (MICIU/AEI/10.13039/501100011033) through the I + D + I project CEX2023-001263-S (Spanish Severo Ochoa Centre of Excellence program), PID2022-141956NB-I00, and PID2022-137569NB-C42, as well as the Generalitat de Catalunya (2021-SGR-00444). A. C.-R. acknowledges support from the postdoctoral fellowship program Beatriu de Pinós 2022 BP 00083, funded by the Secretary of Universities and Research (Government of Catalonia), partially funded by H2020-MSCA-COFUND-2022 through grant agreement 801370. J.R.D-R. acknowledges support from a predoctoral fellowship from the MCIN/AEI assigned to PID2019-109502GA-I00. L.C. acknowledges support from a Ramón y Cajal Research Fellowship, Grant RYC2022-038362-I, funded by MCIN/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chiral plasmonic superlattices from template-assisted assembly of achiral nanoparticles

  • Qi, Xiaoyu
  • Pérez, Luis Alberto
  • Mendoza Carreño, José
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Mihi, Agustín
The creation of chiral plasmonic architectures combining templates with achiral plasmonic particles leads to strong chiroptical responses that can be finely tuned via the characteristics of the colloidal building blocks. Here we show how elastomeric molds, pre-patterned with a hexagonal array of triskelia motifs, can guide the assembly of ordinary noble metal colloids into chiral plasmonic architectures with strong dichroism values. Under normal incidence, the chiral arrays made with gold and silver colloids showed g-factors of 0.18 and 0.4, respectively. In all cases, increasing the size of the colloid allows tuning the optical properties of the structure in the VIS-NIR range. When a superstrate layer is deposited onto the structures, the extrinsic chirality response of the 2D superlattice is revealed and strongly amplified by the chiral motifs under oblique inspection, leading to g-factors of ± 1.2 at ± 14°. Finally, these chiral plasmonic resonances sustained by the triskelion array are used to produce circularly polarized photoluminescence from achiral organic dyes placed on top with up to 20% of dissymmetry., X. Q. and J.M.C. kindly acknowledge the auspices of the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona. The authors aregrateful to Dr. BernatMundetforhisvaluableassistancewith EELS characterization. Authors acknowledge the use of instrumentation f inanced through Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. This work has received funding from the Spanish Agencia Estatal de Investigación (MCIN/AEI/10.13039/ 501100011033) through grants PDC2021-121475-I00, TED2021-132807BI00, PID2022-141956NB-I00 (OUTLIGHT), and CCEX2023-001263-S (Spanish Severo Ochoa Center of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). This research was also supported by the EIC PATHFINDER OPENproject 101046489 (DYNAMO) andEICPATHFINDERCHALLENGESproject101162112(RADIANT),funded bytheEuropeanUnion.X.Q.isgrateful to theChinaScholarship Council for funding (CSC No. 202206790019)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Absence of Anomalous Electron–Phonon Coupling in the Near-Ambient Gap Temperature Renormalization of CsPbBr3 Nanocrystals

  • Fasahat, Shima
  • Schäfer, Benedikt
  • Xu, Kai
  • Nadesh Fiuza-Maneiro
  • Gómez Graña, Sergio
  • Alonso Carmona, M. Isabel
  • Polavarapu, Lakshminarayana
  • Goñi, Alejandro R.
29 pages, including 4 figures, a long table and 2 pages of Supporting Information, Metal halide perovskites exhibit a fairly linear increase of the bandgap with increasing temperature, when crystallized in a tetragonal or cubic phase. In general, both thermal expansion and electron-phonon interaction effects contribute equally to this variation of the gap with temperature. Herein, we have disentangled both contributions in the case of colloidal CsPbBr$_3$ nanocrystals (NCs) by means of photoluminescence (PL) measurements as a function of temperature (from 80 K to ambient) and hydrostatic pressure (from atmospheric to ca. 1 GPa). At around room temperature, CsPbBr$_3$ NCs also show a linear increase of the bandgap with temperature with a slope similar to that of the archetypal methylammonium lead iodide (MAPbI$_3$) perovskite. This is somehow unexpected in view of the recent observations in mixed-cation Cs$_x$MA$_{1-x}$PbI$_3$ single crystals with low Cs content, for which Cs incorporation caused a reduction by a factor of two in the temperature slope of the gap. This effect was ascribed to an anomalous electron-phonon interaction induced by the coupling with vibrational modes admixed with the Cs translational dynamics inside the cage voids. Thus, no trace of anomalous coupling is found in CsPbBr$_3$ NCs. In fact, we show that the linear temperature renormalization exhibited by the gap of CsPbBr$_3$ NCs is shared with most metal halide perovskites, due to a common bonding/antibonding and atomic orbital character of the electronic band-edge states. In this way, we provide a deeper understanding of the gap temperature dependence in the general case when the A-site cation dynamics is not involved in the electron-phonon interaction., The Spanish “Ministerio de Ciencia, Innovación y Universidades” (MICIU) through the Agencia Estatal de Investigación (AEI) is gratefully acknowledged for its support through grant CEX2023-001263-S (MATRANS42) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PID2020-117371RA-I00 (CHIRALPERO), PID2021-128924OB-I00 (ISOSCELLES), PID2022-141956NB-I00 (OUTLIGHT) and TED2021131628A-I00 (MACLEDS). The authors also thank the Catalan agency AGAUR for grant 2021SGR-00444 and the National Network “Red Perovskitas” (MICIU funded). S.F. acknowledges a FPI grant PRE2021-100097 from MICIU and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which she is enrolled. B.S. acknowledges the support of the Erasmus + programme of the European Union through the internship project 2022-1-DE01-KA131-HED-000055364 (STREAM 2022). L.P. acknowledges support from the Spanish MICIU through Ramón y Cajal grant (RYC2018-026103-I) and a grant from the Xunta de Galicia (ED431F2021/05). S.G.G. acknowledges support from project CNS2022-135531 (HARDTOP) funded by 14 MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sign of the Gap Temperature Dependence in CsPb(Br,Cl)3 Nanocrystals Determined by Cs-Rattler-Mediated Electron-Phonon Coupling

  • Fasahat, Shima
  • Fiuza-Maneiro, Nadesh
  • Schäfer, Benedikt
  • Xu, Kai
  • Gómez Graña, Sergio
  • Alonso Carmona, M. Isabel
  • Polavarapu, Lakshminarayana
  • Goñi, Alejandro R.
18 pages, 4 figures, 1 table, So far, the striking sign reversal in the near-ambient slope of the gap temperature dependence of colloidal CsPbCl3 perovskite nanocrystals (NCs) compared to its Br counterpart remains unresolved. Pure bromide NCs exhibit a linear gap increase with increasing temperature, to which thermal expansion and electron-phonon interaction equally contribute. In contrast, the temperature slope for the chlorine compound gap is clearly negative. By combining temperature- and pressure-dependent photoluminescence on a series of CsPb(Br1-xClx)3 NCs, we unravel the origin of such inversion. The electron-phonon interaction is solely responsible, undergoing a sudden change in sign and magnitude due to activation of an anomalous electron-phonon coupling mechanism linked to vibrational modes characterized by synchronous octahedral tilting and Cs rattling. This takes place in the shrunken orthorhombic NC lattice for Cl concentrations exceeding ca. 40%. We have thus clarified a puzzling result directly impacting the optoelectronic properties of lead halide perovskite NCs., The Spanish “Ministerio de Ciencia, Innovación y Universidades” (MICIU) through the Agencia Estatal de Investigación (AEI) is gratefully acknowledged for its support through grant CEX2023-001263-S (MATRANS42) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PID2020-117371RA-I00 (CHIRALPERO), PID2021-128924OB-I00 (ISOSCELLES), PID2022-141956NB-I00 (OUTLIGHT) and TED2021-131628A-I00 (MACLEDS). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444 and the National Network ”Red Perovskitas” (MICIU funded). S.F. acknowledges a FPI grant PRE2021-100097 from MICIU and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which she is enrolled. B.S. acknowledges the support of the Erasmus+ programme of the European Union through the internship project 2022-1-DE01-KA131-HED-000055364 (STREAM 2022). L.P. acknowledges support from the Spanish MICIU through Ramón y Cajal grant (RYC2018-026103-I) and a grant from the Xunta de Galicia (ED431F2021/05). S.G.-G. acknowledges support from project CNS2022-135531 (HARDTOP) funded by 14 MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong Chiro-Optical Activity of Plasmonic Metasurfaces with Inverted Pyramid Arrays

  • Pérez, Luis Alberto
  • Hu, Jinhui
  • Mendoza Carreño, José
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Arteaga, Oriol
  • Goñi, Alejandro R.
  • Mihi, Agustín
Chiral plasmonics has emerged as a powerful tool for manipulating light at the nanoscale with unprecedented control over light polarization. The advances in nanofabrication have led to the creation of nanostructures that support strong chiroptical responses. However, the complexity of the fabrication and the associated high costs remain major challenges in upscaling these architectures. Here, we report on the development of chiral plasmonic metasurfaces composed of inverted pyramid arrays with mismatched directions with respect to the lattice vectors of the array. These metasurfaces are fabricated using a combination of soft lithography and anisotropic etching, resulting in cost-effective and reproducible chiral nanostructures without the need for expensive equipment. The fabricated metasurfaces exhibit high differential transmittance values in the visible spectrum, which are among the highest reported for plasmonic films. Theoretical modeling corroborates the experimental results, demonstrating the significant influence of the mismatch angle on the chiral behavior. Complete polarimetric characterization reveals exceptional chiro-optical activity with circular birefringence exceeding 375°/μm and Kuhn's dissymmetry factors (g-factors) approaching unity., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Individual Fellowship (MSCA-IF) grant agreement No. 839402 (PLASMIONICO) and from the Spanish Ministerio de Ciencia e Innovación through grants, TED2021-132807B–I00 and TED2021-129639B–I00 by the “European Union NextGenerationEU/PRTR. Financial support from the State Investigation Agency through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S) and PID2022-141956NB-I00 (OUTLIGHT) and from the Catalan agency AGAUR (2021-SGR-00444) is gratefully acknowledged as well. JH acknowledges a fellowship from the China Scholarship Council (CSC) and the PhD program in Materials Science from Universitat Autònoma de Barcelona, in which he was enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-Inspired Magnetically Tunable Structural Colors from Elliptical Self-Assembled Block Copolymer Microparticles

  • Mazzotta, Gianluca
  • Bertucci, Simone
  • Mendoza Carreño, José
  • Mihi, Agustín
  • Lova, Paola
  • Comoretto, Davide
  • Steiner, Ullrich
  • Lattuada, Marco
  • Dodero, Andrea
Cephalopods achieve their vivid, dynamic structural coloration through reconfigurable lamellar reflectors, acting as a powerful inspiration for adaptive optical materials. However, synthetic systems that replicate this functionality typically require complex material architectures or multistep fabrication processes. Here, a straightforward strategy is presented for producing magnetically responsive photonic microparticles using linear poly(styrene)-b-poly(2-vinylpyridine) block copolymers. Self-assembly in emulsion droplets yields ellipsoids with stacked lamellar domains that exhibit structural colors spanning the entire visible spectrum. Blending block copolymers with different molecular weights enables precise, continuous control over lamellar periodicity and photonic bandgap spectral position, eliminating the need for chemical modification or the use of swelling agents. Notably, incorporating superparamagnetic iron oxide nanoparticles imparts rapid and reversible magnetic alignment of the microparticles. This orientation aligns the lamellar stacks perpendicular to the magnetic field, resulting in Bragg reflection and angle-dependent coloration. The reflected wavelength can be tuned by changing the viewing angle, which mimics the dynamic optical responses of biological iridophores. Compared to prior systems, our approach reduces synthetic complexity while maintaining high color intensity and angular tunability. Thus, this work introduces a bio-inspired materials concept that offers a simple route toward dynamically tunable optical materials for adaptive camouflage, smart coatings, and next-generation photonic devices., The authors would like to thank Aurélien Crochet for the support with XRD measurements and Carolina Pierucci for the support with 1H-NMR spectroscopy. This study was financially supported by the Marie Sklodowska-Curie Actions (MSCA) Postdoctoral Fellowship COLOUR (Grant No. 101062004), the ERC Advanced Grant PrISMoID (Grant No. 833895), the Adolphe Merkle Foundation, the University of Fribourg, the National Center of Competence in Research (NCCR) for Bio-Inspired Materials (Grant No. 205603), and the Spanish Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through OUTLIGHT (Grant No. PID2022-141956NB-I00) and the Spanish Severo Ochoa Center of Excellence Program (Grant No. CEX2023-001263-S). Open access publishing facilitated by Universite de Fribourg, as part of the Wiley - Universite de Fribourg agreement via the Consortium Of Swiss Academic Libraries., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intrinsic and Extrinsic Circular Dichroism in Linear Arrays of Anisotropic Chiral Nanoparticles

  • Chow, Tsz Him
  • Jo, Sunghwan
  • Lu, Yao
  • Rivilla, Iván
  • Mychinko, Mikhail
  • Bals, Sara
  • Mihi, Agustín
  • Liz Marzán, Luis M
Controlling the collective optical properties of chiral plasmonic systems is essential for advancing photonic and chiral sensing technologies. Using template-assisted self-assembly, we engineered one-dimensional chiral plasmonic linear arrays composed of highly anisotropic chiral gold nanoparticle chains in an end-to-end configuration, achieving tunable plasmonic and chiroptical properties. While isolated chiral NPs exhibit intrinsic plasmonic circular dichroism (CD), their periodic arrangement introduces surface lattice resonances, yielding sharp extrinsic CD peaks. Orientation- and angle-dependent CD measurements enable a clear differentiation between intrinsic and extrinsic CD contributions. Notably, at specific angles of incidence, the assembled arrays exhibit a significant enhancement in the chiroptical response, demonstrating the dynamic tunability of their optical activity. The chiroptical properties of the arrays can be transferred to a luminescent dye, thereby yielding circularly polarized emission. These chiral superlattices supporting intrinsic and extrinsic chiroptical properties offer a robust platform for photonic devices, ultrasensitive chiral sensing, and enantioselective applications., T.H.C. and L.M.L.-M. acknowledge funding from the European Commission under grant HORIZON-TMA-MSCA-PFEF, SEP-210883629 (ChirPlasBiosensing). S.B. and L.M.L.-M. acknowledge funding from the European Research Council (ERC Synergy grant no. 101166855 CHIRAL-PRO). A.M. acknowledges funding from the Spanish Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through grants PID2022-141956NB-I00 (OUTLIGHT) and CEX2023-001263-S (Spanish Severo Ochoa Centre of Excellence program). I.R. acknowledges funding from Grant PID2023-151549NB-I00 funded by MICIU/AEI/10.13039/501100011033, by FSE; grant IT1553-22 funded by the Basque Government and CEX2023-001296-S (Spanish Severo Ochoa Centre of Excellence program)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Symmetric Metal Organic Framework-Plasmonic Architectures for Reversible and High-Sensitivity Optical Sensing

  • Qi, Xiaoyu
  • Pérez, Luis Alberto
  • Meng, Lingxin
  • Imaz, Inhar
  • Alonso Carmona, M. Isabel
  • Maspoch, Daniel
  • Mihi, Agustín
Plasmonic nanostructures have attracted considerable interest for their ability to manipulate light at the nanoscale. The optical response of these metallic architectures is greatly sensitive to changes in their surrounding environment, which makes them particularly interesting for sensing applications. Here, we report a versatile and highly sensitive plasmonic sensing platform that combines the surface lattice resonances (SLRs), sustained by 2D gratings of metal nanoparticles, and the exceptional refractive index tunability offered by ZIF-8 metal–organic framework (MOF) films. The SLRs provide narrow resonances that strongly depend on the surrounding refractive index, which can be modulated via solvent exchange in the ZIF-8. The plasmonic 2D arrays were fabricated using templated-assisted assembly of metal colloids; a scalable and gentle process that enabled the study of different ZIF-8/grating configurations. First, we studied ZIF-8 films on top of the 2D arrays, where an optimized concentration of the colloidal dispersion allowed dynamic and reversible ON/OFF tuning of the SLR response. Second, we explored the role of the refractive index mismatch between substrate and ZIF-8 superstrate. Finally, we fabricated 2D plasmonic gratings completely embedded within ZIF-8 layers, achieving enhanced sensing performance with a refractive index sensitivity of 427 ± 19 nm·RIU−1. These results highlight the potential of MOF–plasmonic hybrids as responsive and tunable nanophotonic platforms for next-generation optical sensing applications., This work has received funding from the Spanish Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) and by “ERDF A way of making Europe” through grants TED2021-132807B-I00, PID2022-141956NB-I00 (OUTLIGHT) and PID2021-123265NB-I00 (MOFTONIC) and from the Generalitat de Catalunya AGAUR projects 2021-SGR-00458 and 2021-SGR-00444 and the CERCA Program/Generalitat de Catalunya. ICMAB and ICN2 are supported by the Severo Ochoa program from the Spanish MINECO (CCEX2023-001263-S and CEX2021-001214-S). X.Q. and L. M. are grateful to the China Scholarship Council and the auspices of the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona. We acknowledge the assistance of the ICMAB-CSIC Electron Microscopy Services., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold-polymer hybrid metasurface for polarization-independent enhanced third harmonic generation in the ultraviolet

  • Mukhopadhyay, Shroddha
  • Conde Rubio, Ana
  • Trull, Jose
  • Mihi, Agustín
  • Scalora, Michael
  • Vincenti, Maria Antonietta
  • Cojocaru, Crina
We present a combined experimental and theoretical study of nonlinear light-matter interactions in a three-dimensional gold-polymer hybrid metasurface. In contrast to conventional two-dimensional designs, which by symmetry may support either transverse electric (TE) or transverse magnetic (TM) polarization, our volumetric architecture accepts both TE and TM modes simultaneously, reflecting the dimensionality and versatility required by the photonic devices. The metasurface comprises a periodic lattice of gold nanostructures embedded in a dielectric polymer matrix, creating complex metal-dielectric interfaces that sustain tightly confined plasmonic resonances. When driven by ultrafast near-infrared (NIR) pulses, these resonances concentrate optical energy at the nanoscale, enabling efficient third-harmonic generation and upconversion of visible light into the ultraviolet (UV) and deep-UV regimes with enhanced conversion efficiency. We perform spatial and temporal mapping of the nonlinear response under both TE and TM excitation. Our measurements reveal polarization-agnostic field enhancement and spectral tunability arising from the three-dimensional morphology-capabilities unattainable in planar metasurfaces, where two-dimensional symmetry inherently limits polarization flexibility and functional bandwidth. This quasi-3D platform provides a flexible design toolbox for polarization-independent UV and deep-UV light sources. Potential applications include high-resolution UV spectroscopy, optical multiplexing, data storage, and emerging quantum photonic architectures. By establishing fundamental insights into three-dimensional nonlinear metasurface behavior, our work paves the way for next-generation reconfigurable, multi-polarization nanophotonic devices., SM, JT, and CC acknowledge the Spanish Agencia Estatal de Investigación from Ministerio de Ciencia, Investigación y Universidades (project PID2023-148620NB-I00 granted by MICIU/AEI/10.13039/501100011033 and FEDER, UE) and US Army Research Laboratory Cooperative Agreement N◦ W911NF-22-2-0236 issued by US ARMY ACC-APG-RTP. S. M. acknowledges predoctoral grant FPI-UPC 2022, funded by Universitat Politècnica de Catalunya (Government of Catalunya). M. A. V. thanks NATO SPS Grant no. G5984 - RESPONDER for financial support. This work has received funding from the Spanish Agencia Estatal de Investigación/ Spanish Ministry of Science and Innovation (AEI/MCIN) through grants PID2022-141956NB-I00 MCIN/AEI/10.13039/501100011033 (OUTLIGHT), and CEX2023-001263-S (MATRANS42, Spanish Severo Ochoa Centre of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). A.C.R. acknowledges support from the postdoctoral fellowship program Beatriu de Pinós 2022 BP 00083, funded by the Secretary of Universities and Research (Government of Catalonia)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering Chiroptical Interactions through Integrating Plasmonic Arrays with Cholesteric Nanocellulose

  • Tao, Han
  • Jo, Sunghwan
  • Chu, Guang
  • Qi, Xiaoyu
  • Estévez, Irene
  • Lizana, Angel
  • Xu, Wenyang
  • Deng, Shengwei
  • Mihi, Agustín
  • Kontturi, Eero
Achieving scalable fabrication with precise control of chiroptical properties in chiral plasmonic materials remains challenging. We present a new family of engineered chiroptical composites comprising linearly assembled gold nanoparticle arrays integrated with cholesteric self-assembled cellulose nanocrystals (CNCs). Aqueous CNC suspensions are cast onto pre-assembled achiral plasmonic nanoparticle arrays via evaporation-induced transfer imprinting lithography, yielding centimeter-scale hybrid films with custom-tailored chiroptical responses. During drying, CNCs co-assemble with the gold nanoparticles at the interface, preserving the array's linear arrangement and keeping it isolated from the overlying cholesteric CNC layers. This configuration combines the linear dichroism of the plasmonic array with the linear birefringence of the CNC matrix, producing strong and tunable plasmonic circular dichroism at the surface lattice resonance, reaching 1217 ± 51 mdeg with a dissymmetry factor of -0.19 ± 0.02. Our approach provides a sustainable platform for engineering multifunctional chiral plasmonic materials with potential applications in optical sensing, photonic devices, and chiral biointerfaces., H.T. acknowledges financial support from Alfred Kordelin Foundation and Academy of Finland (No. 318890 and 318891, Competence Centre for Materials Bioeconomy, FinnCERES). H.T. acknowledges the provision of facilities and technical support by Aalto University at OtaNano-Nanomicroscopy Center (Aalto-NMC). G.C. acknowledges financial support from the National Natural Science Foundation of China (No. 22572028) and the Open Project of State Key Laboratory of Inorganic Synthesis and Preparative Chemistry (Grant number: 2025-2). This work has received funding from the Spanish Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through grants, PID2022-141956NB-I00 (OUTLIGHT). ICMAB is supported by the Severo Ochoa program from the Spanish MINECO (CCEX2023-001263-S). This research was also kindly supported by the European Union through the EIC PATHFINDER OPEN project 101046489 (DYNAMO). X.Q. is grateful to the China Scholarship Council and the auspices of the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona. I.E. and A.L. acknowledge financial support from Ministerio de Ciencia e Innovación and Fondos FEDER (PID2021-562-126509OB-C21 and PDC2022-133332-C21) and Generalitat de Catalunya (2021SGR00138). The authors acknowledge the assistance of the ICMAB-CSIC Electron Microscopy Services. The authors sincerely thank Prof. Nicholas A. Kotov and Dr. Luis Alberto Pérez for their valuable suggestions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Circularly Polarized Lasing in Nanocellulose-Silica Composites

  • Jo, Sunghwan
  • Estévez, Irene
  • Lizana, Angel
  • Campos, Juan
  • Mihi, Agustín
Crystalline nanocellulose (CNC) is a nanometric form of cellulose known for its cholesteric structure, imparting circular dichroism to the material. CNC has been used in many photonic applications, exploiting its chiroptical properties to produce circularly polarized photoluminescence. In this work, an insightful characterization of the polarimetric response of nanocrystalline cellulose created through the scalable process of vacuum filtration is performed. This study confirms the strong dichroic character of the nanocellulose films but also reveals a significant linear dichroism contribution, which in turn limits the use of the material to produce a higher degree of circularly polarized light. Here, it is demonstrated that the incorporation of silica nanospheres into the CNC matrix significantly reduces the linear dichroism in the film. More importantly, the decrease in linear diattenuation correlates with an increase in circular dichroism, leading to samples with improved performance as circular polarizers (circular diattenuator). The enhanced chiroptical response of the silica-nanocellulose composites is demonstrated by building a chiral lasing system consisting of a thin layer of resist containing an organic dye (rhodamine B) enclosed between two layers of nanocrystalline cellulose. A maximum photoluminescence dissymmetry factor of 0.57 is observed at the wavelength of 611 nm., This work had received funding from the Spanish Agencia Estatal de Investigación/ Spanish Ministry of Science and Innovation (AEI/MCIN) through grants PID2022-141956NB-I00 MCIN/AEI/10.13039/501100011033(OUTLIGHT), and CEX2019-000917-S (FUNFUTURE, Spanish Severo Ochoa Centre of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). This research was also kindly supported by the European Union through the ERC Proof of Concept 101069234 (CELLO) and the EIC PATHFINDER OPEN project 101046489 (DYNAMO). J.C., I.E., and A.L. acknowledge funding by the Ministerio de Ciencia de Innovación and Fondos FEDER (PID2021-126509OB-C21)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reconfigurable, Temperature Resilient Phase-Change Metasurfaces Fabricated via High Throughput Nanoimprinting Lithography

  • Ruiz de Galarreta, Carlota de
  • Zhao, Yinghao
  • Mendoza Carreño, José
  • Caicedo, José M.
  • Santiso, José
  • Wright, C. David
  • Alonso Carmona, M. Isabel
  • Li, Jiafang
  • Mihi, Agustín
The combination of metasurfaces with chalcogenide phase-change materials is a highly promising route toward the development of multifunctional and reconfigurable nanophotonic devices. However, their transition into real-world devices is hindered by several technological challenges. This includes, amongst others, the lack of large area photonic architectures produced via scalable nanofabrication methods as required for free-space photonic applications, along with the ability to withstand the high temperatures needed for the phase-change process. In this work, we present a scalable nanofabrication strategy for the production of reconfigurable metasurfaces based on high-throughput, large-area nanoimprint lithography that is fully compatible with chalcogenide phase-change materials processing. Our approach involves the direct imprinting of high-melting-point, thermally stable TiO2 nanoparticle pastes, followed by the deposition of an Sb2Se3 thin film as the phase-change material active layer. The patterned TiO2 film enables the creation of thermally robust metasurfaces, overcoming the limitations of conventional polymer-based nanoimprinting techniques. The versatility of our approach is showcased by producing phase-change devices with two distinct functionalities: (i) metasurfaces with tunable spectral band switching and amplitude modulation capabilities across the near- to mid-infrared, and (ii) reconfigurable chiral metasurfaces, whose chiroptical activity can be switched between the visible and the near-infrared. Experimental results show excellent agreement with numerical simulations and reveal high uniformity across large areas. This work provides a universal, thermally robust and scalable platform for the production of reconfigurable metasurfaces based on phase-change materials, paving the way to low-cost, photonic devices with reconfigurable optical responses that could be extended far beyond the applications demonstrated here., CRdG acknowledges funding from the Marie Sklodowska Curie Individual Fellowship METASCALE (101068089). YZ ackonwledges founding from the Chinese Council (CSC No. 202406030183). This work also received funding from the Spanish AEI through grant PID-2022-141956NB-I00 (OUTLIGHT) and the Severo Ochoa Excellence programme CEX2023-001263-S (MATRANS24). This research was also supported by the EIC PATHFINDER CHALLENGES project 101162112 (RADIANT), funded by the European Union. CDW acknowledges funding from the EPSRC (grants EP/W022931/1 and EP/W003341/1). The authors are grateful to Videsh Kumar for providing h-PDMS hole-stamps for the imprinting of triskelia m-TiO2 patterns, and to Afroditi Koutsogianni and Ana Conde-Rubio for sharing the time of their SEM sessions. Authors would like to thank Dr Anna Esther Carrillo of the ICMAB electron microscopy Service for her assistance with EDS analysis., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mie-mediated edge-enhanced Raman scattering of vertically-stacking ge quantum-dots/Si-SiN array for enhancing photoluminescence and photodetection

  • Yang, Shih-Hsiang
  • Alonso Carmona, M. Isabel
  • Lin, Horng-Chih
  • Li, Pei-Wen
We reported vertically-stacking architecture of Si-Si3N4 embedded Ge quantum dots (QDs) array for quantum nanophotonics. Salient features of ordered, stacking Ge QDs lie in good control over the QD size, spherical-shape, and spatial location without relying on lithographic definition. Mie-mediated interaction of Ge QDs with Si nanolayers is characterized by edge enhanced Raman scattering (EERS) of Si and photoluminescence of Ge QDs at the visible−near infrared bands. Ge QDs PIN diodes with 40 nm-wide intrinsic region showcase high gain× bandwidth > 107 GHz A/A at zero bias for self-powered, energy-efficient photodetection., This work was financially supported by Honghai Research Institute, MA-tek, and National Science and Technology Council, Taiwan 114UA90042, 114-2119-M-A49-005, 113-2927-I-A49-503 and 112-2221-E-A49-162-MY3. MIA acknowledges projects CEX2023-001263-S and PID2022-141956NB-I00 of MICIU (Spain), as well as the CSIC (Spain)-NSTC (Taiwan) collaboration BILTW22002., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed