Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Plasmonic nanoparticle sensors, current progress, challenges, and future prospects

  • Kant, Krishna
  • Beeram, Reshma
  • Cao, Yi
  • dos Santos, Paulo S. S.
  • González-Cabaleiro, Lara
  • García-Lojo, Daniel|||0000-0002-5477-6299
  • Guo, Heng
  • Joung, Younju
  • Kothadiya, Siddhant
  • Lafuente, Marta|||0000-0003-2660-3726
  • Leong, Yong Xiang
  • Liu, Yiyi
  • Liu, Yuxiong
  • Moram, Sree Satya Bharati
  • Mahasivam, Sanje|||0000-0001-9975-3659
  • Maniappan, Sonia
  • Quesada-González, Daniel|||0000-0003-3064-2146
  • Raj, Divakar
  • Weerathunge, Pabudi
  • Xia, Xinyue
  • Yu, Qian
  • Abalde-Cela, Sara
  • Álvarez Puebla, Ramon A.|||0000-0003-4770-5756
  • Bardhan, Rizia|||0000-0002-5854-652X
  • Bansal, Vipul|||0000-0002-3354-4317
  • Choo, Jaebum|||0000-0003-3864-6459
  • Coelho, Luis C. C.
  • de Almeida, José M. M. M.|||0000-0003-3810-5943
  • Gómez-Graña, Sergio
  • Grzelczak, Marek
  • Herves, Pablo
  • Kumar, Jatish|||0000-0003-3078-6297
  • Lohmueller, Theobald|||0000-0003-2699-7067
  • Merkoçi, Arben|||0000-0003-2486-8085
  • Montaño-Priede, José Luis
  • Ling, Xing Yi|||0000-0001-5495-6428
  • Mallada, Reyes
  • Pérez-Juste, Jorge|||0000-0002-4614-1699
  • Pina, María P.|||0000-0001-9897-6527
  • Singamaneni, Srikanth|||0000-0002-7203-2613
  • Soma, Venugopal Rao
  • Sun, Mengtao|||0000-0002-8153-2679
  • Tian, Limei|||0000-0002-1931-8567
  • Wang, Jianfang|||0000-0002-2467-8751
  • Polavarapu, Lakshminarayana
  • Santos, Isabel Pastoriza|||0000-0002-1091-1364
Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

From halide perovskite nanocrystals to supercrystals: fundamentals and applications

  • Aneesha, S. L.
  • Xia, Yifei
  • Okamoto, Takuya
  • Gaur , Deepika
  • Seth, Sudipta
  • Hofkens, Johan
  • Polavarapu , Lakshminarayana
  • Biju, Vasudevanpillai
Halide perovskite supercrystals, also known as superlattices, are electronically coupled low-dimensional materials, such as nanocrystals, quantum dots, or nanoplatelets that offer collective optical and electronic properties distinct from those of their constituents. The intrinsic dielectric properties and defect tolerance of halide perovskites make their supercrystals superior to metal chalcogenide supercrystals. The physicochemical properties of ligands and the shape and size uniformity of the constituents determine the overall size, shape, and electronic and optical properties of these supercrystals, where excitons interact across long distances through phase coherence and dipole coupling, inducing enhanced and narrow-band emission, including superfluorescence, superradiance, amplified spontaneous emission, and lasing. These emergent optical and electronic properties make halide perovskite supercrystals promising for brilliant LEDs, low-threshold lasers, high-efficiency solar cells, and broadband photodetectors. This article provides a state-of-the-art overview of halide perovskite supercrystals, addressing the critical gap between their structure–property relationship and linking the fundamental mechanism of electronic coupling with their emergent optoelectronic properties., Agencia Estatal de Investigación | Ref. TED2021-131628A-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

The toxicity of lead and lead‐free perovskite precursors and nanocrystals to human cells and aquatic organisms

  • Maietta , Immacolata
  • Otero Martinez, Clara
  • Fernández, Sabela
  • Sánchez, Laura
  • González Fernández, Maria Africa
  • Polavarapu , Lakshminarayana
  • Simón Vázquez, Rosana
Halide perovskites have emerged at the forefront of semiconductor materials for photovoltaic and light-emitting devices. However, long-term stability and toxicity are the major barriers to their commercialization. In particular, the toxicity of lead (Pb) and its environmental impact have prompted the exploration of lead-free alternatives like tin (Sn) and bismuth (Bi). Herein, a cytotoxicity study of Pb-based perovskite (CsPbBr3 and CsPbI3) and a lead-free Cs2AgBiBr6 nanocrystals in lung and liver cell lines and in blood cells are reported, revealing that both Pb and Bi exhibit mitogenic effects and oxidative stress in liver cells, cytotoxicity in pulmonary cells and a dose-dependent hemolytic effect, raising concerns about their potential pulmonary-hepato-hemotoxicity. The zebrafish embryo tests reveal SnBr2 displays a notably safer environmental impact profile at elevated concentrations, while Pb and Bi exhibit dose-dependent toxicity. This study provides compelling evidence that Sn compounds demonstrate a safer toxicity profile in both human cells and aquatic organisms under the studied conditions, supporting their potential as a more environmentally friendly alternative. In contrast, Bi compounds exhibit a toxicity profile similar to Pb perovskites, warranting caution in its use as a substitute. These findings guide future research and regulatory efforts in the safety and sustainability of perovskite nanocrystals., Xunta de Galicia | Ref. ED431B2024/31, Xunta de Galicia | Ref. ED431F2021/05, Xunta de Galicia | Ref. ED481A2021/364, Xunta de Galicia | Ref. ED481A2021/318, Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Halide perovskite photocatalysts for clean fuel production and organic synthesis: opportunities and challenges

  • Singh, Siddharth
  • Hamid, Zeinab
  • Ramavath , Babu
  • Gómez Graña, Sergio
  • Hu, Xiaowen
  • McCulloch, Iain
  • Hoye, Robert L. Z.
  • Govind Rao, Vishal
  • Polavarapu , Lakshminarayana
The need to constrain the use of fossil fuels causing global warming is motivating the development of a variety of photocatalysts for solar‐to‐fuel generation and chemical synthesis. In particular, semiconductor‐based photocatalysts have been extensively exploited in solar‐driven organic synthesis, carbon dioxide (CO 2 ) conversion into value‐added products, and hydrogen (H 2 ) generation from water (H 2 O) splitting. Recently, metal halide perovskites (MHPs) have emerged as an important class of semiconductors for heterogeneous photocatalysis owing to their interesting properties. Despite key issues with long‐term stability and degradation in polar solvents due to their ionic character, there has been significant progress in halide perovskite‐based photocatalysts with improving their stability and performance in the gas and liquid phases. This review discusses the state‐of‐the‐art for using halide perovskite‐based photocatalysts and photoelectrocatalysis in hydrogen production from water and halogen acid solutions, CO 2 reduction into value‐added chemicals, and various organic chemical transformations. The different types of halide perovskites used, design strategies to overcome the instability issues in polar solvents, and the efficiencies achieved are discussed. Furthermore, the outstanding challenges associated with the use of polar electrolytes and how the stability and performance can be improved are discussed., Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Xunta de Galicia | Ref. ED431F2021/05, UK Research and Innovation | Ref. EP/X029900/1, Royal Academy of Engineering | Ref. RCSRF2324‐18‐68, Engineering and Physical Sciences Research Council | Ref. EP/T026219/1, Engineering and Physical Sciences Research Council | Ref. EP/W017091/1, Engineering and Physical Sciences Research Council | Ref. EP/X038777/1
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Organic A‐site cations improve the resilience of inorganic lead‐halide perovskite nanocrystals to surface defect formation

  • Otero Martinez, Clara
  • Ye, Junzhi
  • De Trizio, Luca
  • Goldoni, Luca
  • Rao, Akshay
  • Pérez Juste, Jorge
  • Hoye, Robert L. Z.
  • Manna, Liberato
  • Polavarapu , Lakshminarayana
Lead halide perovskite nanocrystals (LHP NCs) are generally prone to surface defect formation during the purification process, resulting in a reduced photoluminescence (PL) quantum yield. The purification of LHP NCs using antisolvents leads to the detachment of surface atoms and ligandsin the form of alkylammonium-halides or A-carboxylates (A: Cs, methylammonium, MA, or formamidinium, FA. Currently, intense research is being carried out to improve the surface stability of LHP NCs using various long-chain organic ligands that strongly bind to the surface of NCs. Herein, the findings on the higher surface stability of hybrid (MAPbBr3 and FAPbBr3) LHP NCs compared to that of inorganic CsPbBr3 NCs against purification with polar antisolvents are reported. It is discovered that the CsPbBr3 NC surface stability can be enhanced (reaching that of hybrid perovskite NCs) by the incorporation of a small amount of MA or FA A-site organic cations into their lattice, corroborated by the evidence that the PL quantum yield of mixed A-cation CsxFA1-xPbBr3 and CsxMA1-xPbBr3 NCs remains unaffected after several purification cycles. It is hypothesized that this is attributed to hydrogen bonding between the organic A-site cations and the neighboring halides on the surface. These findings are not only fundamentally important but are also expected to have wide implications in the field of metal-halide perovskite optoelectronics., Xunta de Galicia | Ref. ED481A 2021/318, Ministerio de Ciencia e Innovación | Ref. RYC2018-026103-I, Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Xunta de Galicia | Ref. ED431F 2021/05, UK Research and Innovation | Ref. EP/X029900/1, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Amine-free CsPbBr3 perovskite nanoplatelets produced with monolayer-precision thickness control

  • Wu, Ye
  • Liu , Yang
  • Fiuza Maneiro, Nadesh
  • Gómez Graña, Sergio
  • Imran, Muhammad
  • Polavarapu , Lakshminarayana
  • Rogach, Andrey L.
  • Li, Xiaoming
  • Zeng, Haibo
Ultrathin lead halide perovskite nanoplatelets (NPLs) can enable tunable emission across the entire visible spectrum of light. The band-gap tunability of NPLs does not require halide composition engineering, so halide segregation can be avoided. However, their photoluminescence quantum yield (PLQY) and optoelectronic applications are often hampered due to reversible protonation and deprotonation of conventional amine ligands. Herein, we demonstrate the synthesis of benzenesulfonate-terminated CsPbBr3 NPLs without the use of any amine, and we clarify their nucleation and growth mechanism. The thickness of amine-free NPLs is controlled with monolayer-level precision, and thus, their emission wavelength is tuned between 437 and 504 nm. Amine-free NPLs are solely terminated by a benzenesulfonate group, leading to a Cs-rich surface. The amine-free NPLs exhibit PLQYs up to 80%, and slow charge carrier relaxation. This work offers a comprehensive study of surface chemistry and ligand dynamics of perovskite NPLs., Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Xunta de Galicia | Ref. ED431F 2021/05, Natural Science Foundation of Jiangsu Province, Innovation and Technology Commission of Hong Kong SAR
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Color-tunable lead halide perovskite single-mode chiral microlasers with exceptionally high glum

  • Gu, Haotian
  • Xu, Haoyuan
  • Yang, Chao
  • Feng, Yifan
  • Gao, Guanfeng
  • Hoye, Robert L. Z.
  • Hu, Xiaowen
  • Polavarapu , Lakshminarayana
  • Zhou, Guofu
  • Jiang, Xiao-Fang
Chiral microlasers hold great promise for optoelectronics from integrated photonic devices to high-density quantum information processing. Despite significant progress in lead-halide perovskite emitters, chiral lasing with high dissymmetry factors (glum) has not yet been realized. Here, we demonstrate chiral single-mode microlasers with exceptional stability and tunable emission across the visible range by combining CsPbClxBr3-x perovskite microrods (MRs) with a cholesteric liquid crystal (CLC) layer. The MRs lase via a whispering gallery mode (WGM) microcavity and confer chirality through the encapsulated CLC layer, thus exhibiting circularly polarized lasing with dissymmetry factors reaching 1.62. Importantly, we demonstrate wavelength-tunable high dissymmetry chiral lasers in a broad spectral range by tuning the halide composition and using CLC layers with the desired photonic bandgap (PBG). This facile approach to generate chiral lasing not only is applicable to semiconductor nano- and microcrystals but also paves the way for potential integration into nanoscale photonic devices., Agencia Estatal de Investigaci?n | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigaci?n | Ref. TED2021-131628A-I00, Guangzhou Municipal Science and Technology Bureau, National Natural Science Foundation of China, Natural Science Foundation of Guangdong Province, Guangdong Provincial Laboratory of Optical Information Materials and Technology, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Chiral molecules in action: chemistry of chiral perovskite and perovskite-inspired materials

  • Ramavath , Babu
  • Heger, Julian E.
  • Dutta, Taniya
  • Hu, Xiaowen
  • Pradhan, Narayan
  • Müller-Buschbaum, Peter
  • Gómez Graña, Sergio
  • Polavarapu , Lakshminarayana
The emergence of chiral metal halides marks a pivotal advancement in materials science, where structural asymmetry enables unprecedented control over spin-selective transport and polarized light interactions for optoelectronic and spintronic technologies. The introduction of chiral ligands into the metal halide lattice or on the surface of NCs imparts chirality to the corresponding hybrid materials, which adapts the handedness (R or S) of the chiral molecule. The choice of chiral molecule and metal halide type critically influences the crystal structure and dimensionality of metal halide crystals and thus their properties. Despite significant progress, the relationship between structure and chiroptical efficiency remains unclear. Nonetheless, they show great promise for spin filtering, enabling the fabrication of chiral LEDs and photodetectors. Considering these advancements, this Perspective focuses on the chiral-ligand-assisted design, synthesis, and functional exploration of chiral metal halide bulk and nanocrystals, along with the outstanding challenges that need to be addressed in the future., Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Deutsche Forschungsgemeinschaft | Ref. EXC 2089/1 390776260, Xunta de Galicia | Ref. ED431F2021/05, Alexander von Humboldt-Stiftung, Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. RYC2018-026103-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

All-inorganic lead-free doped-metal halides for bright solid-state emission from primary colors to white light

  • Babu, Ramavath
  • López Fernández, Iago
  • Prasanthkumar, Seelam
  • Polavarapu , Lakshminarayana
Metal halides have been explored with the aid of strong photoluminescence for optical and optoelectronic applications. However, the preparation of lead (Pb)-free solid-state emitters with high photoluminescence quantum yields (PLQYs) and tunable emission remains exceptionally challenging. Herein, we report metal ion (Cu(I), Mn(II), and Sn(II))-doped Cs3ZnI5 single crystals that are primary color (violet, green, and orange/red) emitters with extremely high PLQYs. Whereas the Mn-doping leads to bright green emissions with 100% PLQY, the Cu- and Sn-doping give rise to blue and red emissions with PLQYs of 57 and 64%, respectively. Interestingly, higher Mn doping results in white light emissive crystals as a side product, which are found to be Mn-doped CsI single crystals. The bright white light emissive crystals can be synthesized in a pure form in large quantities and exhibit a high color rendering index (CRI) of 78 and CIE coordinates of (0.30, 0.38), which are close to daylight conditions. To the best of our knowledge, this is the first demonstration of white light emission from a complete inorganic system. Importantly, the single crystals of all colors exhibit high long-term stability as their PLQY remains unchanged even after 2 months of preparation, and are thermally stable up to 600 °C., Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Xunta de Galicia | Ref. ED431F2021/05, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Strategies to maximize the dopant‐to‐exciton emission ratio in Mn‐Doped CsPbCl3 nanocrystals

  • Fiuza Maneiro, Nadesh
  • López Fernández, Iago
  • Ye, Junzhi
  • Zhang, Yunwei
  • Otero Martinez, Clara
  • Dai, Linjie
  • Ceballos, Manuel
  • Samanta , Subarna
  • Pino, Pablo del
  • Rao, Akshay
  • Gómez Graña, Sergio
  • Hoye, Robert L. Z.
  • Polavarapu , Lakshminarayana
Doping CsPbCl3 perovskite nanocrystals (NCs) with Mn 2+ has gained attention due to their interesting emission properties. However, the photoluminescence (PL) spectra of these NCs display both dopant and exciton emission peaks. It is critical to achieve color purity for light–emitting diode (LED) applications, but the factors that govern this remain unclear. Herein, a systematic investigation of the factors determining the exciton‐to‐dopant energy transfer process in Mn2⁺‐doped CsPbCl3 NCs is presented to reveal how the exciton‐to‐Mn2⁺ emission ratio can be maximized. These findings indicate that this process is not only affected by dopant concentration and halide (Cl/Br) composition, but also by the co‐dopants used, as well as surface passivation. These factors can potentially account for the discrepancies in the exciton‐to‐dopant emission ratios across the literature. These results show that post‐synthetic surface passivation of Mn2⁺‐doped CsPbCl3 NCs with quaternary ammonium salt, such as dimethyldidodecylammonium chloride (DDACl), drastically enhances the exciton‐to‐Mn2⁺ emission ratio, achieving a two‐fold increase. Ultrafast pump‐probe spectroscopy surprisingly reveals that the passivation can introduce shallow trap states that enhance energy transfer to dopant sites and influence overall luminescence efficiency through non‐radiative decay processes. This study sets guidelines for maximizing dopant emission in doped perovskite NCs., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Photoluminescence of te‐doped double perovskite Cs2ZrCl6 nanocrystals versus bulk: insights from temperature‐dependent spectroscopy

  • Liu , Yang
  • Wu, Ye
  • Sokolova, Anastasiia
  • Shi, Xinmin
  • Kershaw, Stephen V.
  • Wu, Yusheng
  • Polavarapu , Lakshminarayana
  • Li, Xiaoming
  • Rogach, Andrey L.
Although bulk crystals of lead‐free vacancy‐ordered double perovskites demonstrated a highly efficient emission, their nanocrystals (NCs) counterparts exhibit inferior optical performance. To understand the reasons behind this phenomenon, Cs 2 ZrCl 6 :Te 4+ double perovskite NCs are synthesized, and their optical properties are compared with their bulk powders. Temperature‐dependent spectroscopy revealed that the NCs sustain a thermal sensitization of the intermediate trap state, which is located between the self‐trapped state of the host (Cs 2 ZrCl 6 ) and the triplet states of the dopant (Te 4+ ). This opens up a pathway for the non‐radiative recombination, and thus decreases the energy transfer efficiency from host to dopant. Importantly, this pathway is suppressed in larger (40 nm) Cs 2 ZrCl 6 :Te 4+ NCs, resulting in their photoluminescence quantum yield of 24%, as compared to 7% for the 22 nm NCs. Furthermore, the emission spectral range of these double perovskite NCs is shown to extended into near‐infrared by incorporating rare‐earth ions as additional dopants. The study has established a crucial relation between the optical properties and the size effect in lead‐free vacancy‐ordered double perovskites and thus lays a foundation for further improvement of their optical performance., Xunta de Galicia | Ref. ED431F2021/05, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Natural Science Foundation of Jiangsu Province | Ref. BK20220142
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Ferromagnetic elements in two‐dimensional materials: 2D magnets and beyond

  • Papavasileiou, Anastasios V.
  • Menelaou, Melita
  • Sarkar, Kalyan J.
  • Sofer, Zdenek
  • Polavarapu , Lakshminarayana
  • Mourdikoudis, Stefanos
Ferromagnetism in 2D materials has attracted tremendous interest from the scientific community thanks to its potential for the design of magnetic materials with unique properties. The presence of a ferromagnetic element in a 2D material can improve the existing properties and offer new ones, giving rise to the development of manifold applications. This review focuses on recent advances and perspectives of 2D materials that bear at least one ferromagnetic element (iron, cobalt, nickel) as i) structural constituent, ii) dopant atom, or iii) adjacent atom through proximity effect. By describing in detail the magnetic properties that have emerged so far, their potential to form next‐generation 2D magnets is discussed. Moreover, the contribution of such 2D materials is analyzed in various applications (electrochemical, photochemical, optical, and electronic), aiming to explore further functionalities and capabilities of ferromagnetic elements, apart from their magnetic nature. Special attention is given to gadolinium and other rare earth elements that display a ferromagnetic order even at ultra‐low temperatures and form part of 2D structured materials, with particularly appealing properties deriving from their 4f electrons., Agencia Estatal de Investigación | Ref. PID2020‐117371RA‐I00, Agencia Estatal de Investigación | Ref. TED2021‐131628A‐I00, Xunta de Galicia | Ref. ED431F2021/05, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Lead‐free halide perovskite materials and optoelectronic devices: progress and prospective

  • López Fernández, Iago
  • Valli, Donato
  • Wang, Chun‐Yun
  • Samanta, Subarna
  • Okamoto, Takuya
  • Huang, Yi‐Teng
  • Sun, Kun
  • Liu , Yang
  • Chirvony, Vladimir S.
  • Patra, Avijit
  • Zito, Juliette
  • De Trizio, Luca
  • Gaur , Deepika
  • Sun, Hong‐Tao
  • Xia, Zhiguo
  • Li, Xiaoming
  • Zeng, Haibo
  • Mora‐Seró, Iván
  • Pradhan, Narayan
  • Martínez‐Pastor, Juan P.
  • Müller‐Buschbaum, Peter
  • Biju, Vasudevanpillai
  • Debnath, Tushar
  • Saliba, Michael
  • Debroye, Elke
  • Hoye, Robert L. Z.
  • Infante, Ivan
  • Manna, Liberato
  • Polavarapu , Lakshminarayana
Halide perovskites, in the form of thin films and colloidal nanocrystals, have recently taken semiconductor optoelectronics research by storm, and have emerged as promising candidates for high‐performance solar cells, light‐emitting diodes (LEDs), lasers, photodetectors, and radiation detectors. The impressive optical and optoelectronic properties, along with the rapid increase in efficiencies of solar cells and LEDs, have greatly attracted researchers across many disciplines. However, most advances made so far in terms of preparation (colloidal nanocrystals and thin films), and the devices with highest efficiencies are based on Pb‐based halide perovskites, which have raised concerns over their commercialization due to the toxicity of Pb. This has triggered the search for lower‐toxicity Pb‐free halide perovskites and has led to significant progress in the last few years. In this roadmap review, researchers of different expertise have joined together to summarize the latest progress, outstanding challenges, and future directions of Pb‐free halide perovskite thin films and nanocrystals, regarding their synthesis, optical spectroscopy, and optoelectronic devices, to guide the researchers currently working in this area as well as those that will join the field in the future., Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Xunta de Galicia | Ref. ED431F2021/05, Agencia Estatal de Investigación | Ref. TED2021-131600B-C31, Generalitat Valenciana | Ref. MFA/2022/020, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

State‐of‐the‐art, insights, and perspectives for MOFs‐nanocomposites and MOF‐derived (nano) materials

  • Mourdikoudis , Stefanos
  • Dutta, Subhajit
  • Kamal , Saqib
  • Gómez Graña, Sergio
  • Pastoriza Santos, Isabel
  • Wuttke, Stefan
  • Polavarapu , Lakshminarayana
Composite structures created from metal‒organic framework (MOF) matrices are reviewed in this work. Depending on the nature of the second component apart from the MOF platform, several synergistic properties may arise; at the same time, the initial features of the single constituent materials are usually maintained, and individual shortcomings are mitigated. Currently, timely energy and environmental challenges necessitate the quest for more advanced materials and technologies. Significant developments in MOF‐nanocomposites have enabled their application across a wide range of modern and traditional fields. This review demonstrates in an exhaustive and critical way a broad range of MOF‐based nanocomposites, namely, MOF/perovskite nanoparticles (NPs), MOF/metal (non‐iron) oxide NPs, MOF/Fe 3 O 4 NPs, MOF/metal chalcogenide NPs, MOF/metal NPs, and MOF/carbon‐based materials, as well as nanocomposites of MOFs with other semiconductor NPs. Key points related to the synthesis, characterization, and applications of these materials are provided. Depending on their configuration, the composites under discussion can be applied in domains such as photoelectrochemical sensing, antibiotic/dye degradation, optoelectronics, photovoltaics, catalysis, solar cells, supercapacitors, batteries, water remediation, and drug loading. Sometimes, MOFs can undergo certain processes (e.g. pyrolysis) and act as precursors for composite materials with appealing characteristics. Therefore, a special section in the manuscript is devoted to MOF‐derived NP composites. Toward the end of the text, we conclude while also describing the challenges and possibilities for further investigations in the umbrella of material categories analyzed herein. Despite the progress achieved, key questions remain to be answered regarding the relationships among the morphology, properties, and polyvalent activity of these materials. The present work aims to shed light on most of their aspects and innovative prospects, facilitating a deeper comprehension of the underlying phenomena, functionality, and mechanistic insights governing their behavior., Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. PID2022-138724NB-I00, Xunta de Galicia | Ref. ED431F 2021/05, Xunta de Galicia | Ref. ED431C 2020/09, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Zn(II) alloying improves the luminescence efficiency of hybrid tetrahedral Mn(II) halides ((DMAPH) 2 MnX 4 ; X = Cl, Br, and I) to near-unity

  • Babu, Ramavath
  • Samanta, Anunay
  • Prasanthkumar, Seelam
  • Polavarapu , Lakshminarayana
Zero-dimensional (0D) tetrahedral Mn(II) halides (MnX42– (X = Cl, Br, I)) have emerged as solid-state green emitters with high photoluminescence quantum yield (PLQY). However, their PLQYs are significantly dependent on the environment surrounding the Mn(II), i.e., the organic cation and the halide. Although the tetrahedral Mn(II) bromide is highly emissive, Mn(II) iodide exhibits relatively low PLQY. Herein, we report the preparation of organic–inorganic hybrid tetrahedral Mn(II) halides (Cl, Br, and I) using the organic cation protonated 4-dimethylaminopyridine ((DMAPH)+), and they all exhibit bright green luminescence with high PLQY (∼76%–80%), regardless of the halide ion. Surprisingly, DMAPH undergoes N-demethylation exclusively in the case of tetrahedral Mn(II) iodide. Furthermore, we find that the controlled Zn2+-doping/alloying in the Mn(II) halide lattice improves the PLQY to near-unity (∼88%–94%) and is stable for more than 60 days. The increase of the excited state decay time in time-resolved PL lifetime measurements revealed that the improved luminescence is due to reduced Mn(II)–Mn(II) interactions of the lattice upon replacing some of the Mn(II) with Zn(II). This is further supported by the Zn-alloying-induced hyperfine splitting of Mn(II) ions observed in the electron paramagnetic resonance (EPR) measurements. However, excess alloying reduces PLQY due to the decrease in the tetrahedral Mn(II) concentration in the lattice. These results demonstrate the fabrication of hybrid Mn(II) halide (Cl, Br, and I) single crystals with near-unity PLQY and provide design strategies to improve their PLQY by selective organic cations and doping/alloying., Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Xunta de Galicia | Ref. ED431F2021/05, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Light-driven hydrogen generation from methanol vapor using halide perovskite nanocrystals

  • Wu, Linzhong
  • He, Fei
  • Du, Haiqiong
  • Zhang, Yang
  • Ghimire, Sushant
  • Stein, Markus
  • Huang, He
  • Polavarapu , Lakshminarayana
  • Zhang, Qiao
  • Feldmann, Jochen
  • Debnath, Tushar
  • Wang, Yiou
The facile preparation, structural tunability, and unique optical properties of halide perovskites have led to great success in solar cells and light-emitting devices. However, due to their instability in low-cost polar solvents (e.g., methanol and water), their application in photocatalysis is currently lagging and usually requires special encapsulation. Herein, we demonstrate that halide perovskite (MAPbBr3, CsPbBr3) nanocrystals are stable for photocatalytic hydrogen production from methanol/water vapor as proton sources without special protection in the presence of Pt cocatalysts. In methanol vapor, an optimal MAPbBr3 perovskite NC film exhibits steady hydrogen evolution for ∼20 h under solar irradiation, reaching a marked hydrogen evolution rate of 424 μmol·g–1·h–1. Notably, time-resolved spectroscopies reveal that the diffusion-limited feeding of electron–hole pairs toward Pt clusters dominates the dynamics of charge transfer. This study shows the potential of directly using halide perovskites for light-driven reactions in polar environments., Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Inducing efficient and multiwavelength circularly polarized emission from perovskite nanocrystals using chiral metasurfaces

  • Fiuza Maneiro, Nadesh
  • Mendoza Carreño, Jose
  • Gómez Graña, Sergio
  • Alonso, Maria Isabel
  • Polavarapu , Lakshminarayana
  • Mihi, Agustín
Chiral nano‐emitters have recently received great research attention due to their technological applications and the need for a fundamental scientific understanding of the structure‐property nexus of these nanoscale materials. Lead halide perovskite nanocrystals (LHP NCs) with many interesting optical properties have anticipated great promise for generating chiral emission. However, inducing high anisotropy chiral emission from achiral perovskite NCs remains challenging. Although chiral ligands have been used to induce chirality, their anisotropy factors (g lum ) are low [10 −3 to 10 −2 ]. Herein, the generation of high anisotropy circularly polarized photoluminescence (CPL) from LHP NCs is demonstrated using chiral metasurfaces by depositing nanocrystals on top of prefabricated resonant photonic structures (2D gammadion arrays). This scalable approach results in CPL with g lum to a record high of 0.56 for perovskite NCs. Furthermore, the differences between high‐index dielectric chiral metasurfaces and metallic ones are explored for inducing chiral emission. More importantly, the generation of simultaneous multi‐wavelength circularly polarized light is demonstrated by combining dielectric and metallic chiral metasurfaces., Agencia Estatal de Investigación | Ref. PID2022-141956NB-I00, Agencia Estatal de Investigación | Ref. CEX2023-001263-S, Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Xunta de Galicia | Ref. ED431F2021/05, Universidade de Vigo/CISUG, Generalitat de Catalunya | Ref. 2021‐SGR‐00444, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. RYC2018-026103-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Single-step synthesis of Cs3Bi2I9 nanocrystals for scalable direct X-ray detectors

  • Ramavath , Babu
  • Ghosh, Joydip
  • Schrenker, Nadine J.
  • Dudipala, Kavya Reddy
  • Huang, Yi-Teng
  • Wang, Yixin
  • Dong, Shiling
  • Gaur , Deepika
  • Bals, Sara
  • Gómez Graña, Sergio
  • Chua, Xian Wei
  • Braddock, Isabel H. B.
  • Veale, Matthew. C.
  • Wilson, Matthew. D.
  • Woolley, Jack Matthew
  • Rao, Akshay
  • Hoye, Robert L. Z.
  • Polavarapu , Lakshminarayana
Lead-free perovskite-inspired materials have emerged as promising candidates for direct X-ray detection. However, in the early exploration of emerging materials, the focus was on large single crystals. Herein, we report a facile, scalable, single-step synthesis of high-quality Cs3Bi2I9 nanocrystals (NCs) directly from their precursor powders through an ultrasonication approach. The large-scale synthesis of the NCs allowed for the production of 0.78 cm2 pellets used in the fabrication of X-ray detection devices, which exhibit a high bulk resistivity of 1 × 1011 Ω cm and a low dark current density of 3.3 nA cm–2 under an applied bias of 50 V (357 V cm–1 electric field). These devices achieve a limit detection of 108 nGyair s–1, an order of magnitude improvement over the a-Se used in commercial medical imaging, along with stable current under continuous X-ray exposure with a peak energy of 35 keVp. Finally, we demonstrate the scale-up of these detectors by producing thick films 9 cm2 in area, achieving a performance comparable to that of the detectors based on pellets., Engineering and Physical Sciences Research Council | Ref. EP/Y032942/1, Royal Academy of Engineering | Ref. RCSRF/2324-18-68, Fonds Wetenschappelijk Onderzoek | Ref. 12AAO25N, Xunta de Galicia | Ref. ED431F 2021/05, Division of Electrical, Communications and Cyber Systems | Ref. ECCS-2313755, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. RYC2018-026103-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Femtosecond laser breaks the lattice symmetry and induces broadband second harmonic feneration in 3D halide perovskites

  • Gao, Guan‐Feng
  • Li, Ze‐Lin
  • Chen, Ze‐Kai
  • Zhong, Long‐Feng
  • Hou, Nan
  • Yan, Zhi‐Hao
  • Wang, Jing
  • Li, Chen‐Hui
  • Zeng, Fan‐kai
  • Xu, Xiaozhi
  • Un, Ieng Wai
  • Chen, Yihang
  • Zhou, Jiadong
  • Polavarapu , Lakshminarayana
  • Hu, Xiaowen
  • Jiang, Xiao‐Fang
3D halide perovskites have shown exceptional promise not only in photovoltaic and optoelectronic applications but also in nonlinear optics such as second harmonic generation (SHG). However, their efficiency in SHG is limited by the centrosymmetric nature of their crystal structures, and thus achieving SHG from 3D perovskites by breaking their inversion symmetry remains a formidable challenge. In this work, the precision and versatility of the femtosecond (fs) pulse laser writing technique are leveraged to fabricate microstructures of hybrid and inorganic perovskites with non‐centrosymmetric. These microstructures exhibit a strong SHG signal across a broad wavelength range (790–1210 nm), while the pristine 3D perovskites do not show any SHG. The enhanced SHG response is attributed to the laser‐induced modifications of the A‐site cations (MA, Cs) and halide defects in the pristine 3D perovskites, which disrupt the inversion symmetry. Furthermore, the potential of using non‐centrosymmetric microstructures of perovskites for ultrafast pulse characterization via the Frequency‐Resolved Optical Gating technique is demonstrated. These findings highlight the precise control of non‐centrosymmetric states using fs lasers, paving the way for the design and utilization of perovskites in advanced nonlinear optical and photonic applications., National Natural Science Foundation of China, Science and Technology Program of Guangzhou, Natural Science Foundation of Guangdong Province, Guangdong Provincial Laboratory of Optical Information Materials and Technology, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Chiral molecules induce enantiomorphic lattice helicity in chiral 0D tin bromide crystals

  • Ramavath , Babu
  • Xu, Haoyuan
  • Covelo Rodríguez, Berta
  • Pérez Juste, Ignacio
  • Heger, Julian E.
  • Solhtalab, Nasrin
  • Li, Zelin
  • Zhong, Longfeng
  • Hu, Xiaowen
  • Deschler, Felix
  • Müller‐Buschbaum, Peter
  • Jiang, Xiao‐Fang
  • Gómez Graña, Sergio
  • Polavarapu , Lakshminarayana
Chiral organic–inorganic hybrid metal halides have emerged as a promising class of materials for spin‐controlled optical and optoelectronic effects and related applications. Chiral hybrid metal halides generally crystallize in non‐helical space groups. Herein, we report the discovery of zero‐dimensional (0D) chiral (R/S‐MBA) 2 SnBr 6 (MBA: methylbenzylammonium cation) single crystals with enantiomorphic lattice helicity. The S‐enantiomer of the chiral molecule induces right‐handed helicity with the P6 1 space group (right‐handed, P‐helix), while the R‐enantiomer induces right‐handed helicity with the P6 5 space group (left‐handed, M‐helix). The chiral molecules induce the helical twist of inorganic units in the lattice through N─H···Br and C─H···π interactions. Density functional theory (DFT) calculations indicate that the strong electronic coupling between chiral molecules and SnBr 6 2− subunits is responsible for the generation of chirality. The chiral crystals exhibit circular dicroism (CD) spectra with a high dissymmetry factor ( g CD ) of 3.5 × 10 − 2 and no Cotton effect, maintaining the same CD sign throughout the spectrum. In addition, they exhibit broadband second harmonic generation (SHG) over a broad excitation range, with a g CP‐SHG up to 0.44. Furthermore, we find that the alloying of Sn with Pb leads to a change in dimensionality from 0D to non‐helical 1D structures. These crystals with helical lattices and interesting CD responses are expected to open new avenues for spin‐controlled applications., Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. PID2022-138023NB-I00, Deutsche Forschungsgemeinschaft | Ref. EXC 2089/1 – 390776260, Deutsche Forschungsgemeinschaft | Ref. FKZ 05D23WO1, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

  • Kant , Krishna
  • Beeram, Reshma
  • Cao, Yi
  • dos Santos, Paulo S. S.
  • Gonzalez Cabaleiro, Lara
  • García Lojo, Daniel
  • Guo, Heng
  • Joung, Younju
  • Kothadiya, Siddhant
  • Lafuente, Marta
  • Leong, Yong Xiang
  • Liu, Yiyi
  • Liu, Yuxiong
  • Moram, Sree Satya Bharati
  • Mahasivam, Sanje
  • Maniappan, Sonia
  • Quesada González, Daniel
  • Raj, Divakar
  • Weerathunge, Pabudi
  • Xia, Xinyue
  • Yu, Qian
  • Abalde Cela, Sara
  • Álvarez Puebla, Ramón Ángel
  • Bardhan, Rizia
  • Bansal, Vipul
  • Choo, Jaebum
  • Coelho, Luis C. C.
  • de Almeida, José M. M. M.
  • Gómez Graña, Sergio
  • Grzelczak, Marek
  • Hervés Beloso, Juan Pablo
  • Kumar, Jatish
  • Lohmueller, Theobald
  • Merkoçi, Arben
  • Montaño Priede, José Luis
  • Ling, Xing Yi
  • Mallada, Reyes
  • Pérez Juste, Jorge
  • Pina, María P.
  • Singamaneni, Srikanth
  • Soma, Venugopal Rao
  • Sun, Mengtao
  • Tian, Limei
  • Wang, Jianfang
  • Polavarapu , Lakshminarayana
  • Pastoriza Santos, Isabel
Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light–matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches., Xunta de Galicia | Ref. 2022/294, Agencia Estatal de Investigación | Ref. PID2020-120306RB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121787-I00, Generalitat de Catalunya | Ref. 2020SGR00166, Universitat Rovira i Virgili | Ref. 2021PFR-URV-B2-02, Agencia Estatal de Investigación | Ref. PID2019-108660RB-I00, Agencia Estatal de Investigación | Ref. PID2021-124795NB-I00, Generalitat de Catalunya | Ref. 2021SGR01464, Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Xunta de Galicia | Ref. ED431F2021/05, Agencia Estatal de Investigación | Ref. PID2022-138724NB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Tailoring chiral gold nanorods via single‐step seed‐to‐Au(III) ratio and unlocking their potential in refractive index sensing

  • Fernandez Lodeiro, Carlos
  • Gómez Graña, Sergio
  • Cordero Ferradás, María José
  • Martín, Victor F.
  • Albrecht, Wiebke
  • Hervés Beloso, Juan Pablo
  • Polavarapu , Lakshminarayana
  • Taboada, José M.
  • Obelleiro Basteiro, Fernando
  • Bals, Sara
  • Pérez Juste, Jorge
  • Pastoriza Santos, Isabel
Colloidal chiral plasmonic nanoparticles are garnering growing interest due to their interaction with circularly polarized light, offering advanced optical applications. Their circular dichroism (CD) spectra are significantly narrower and more defined than extinction spectra, making them ideal for refractive index‐based sensing. Despite progress in colloidal synthesis, this field remains relatively underexplored. In this work, a one‐step, seed‐mediated route to chiral Au nanorods is introduced in which the molar ratio Au 3 ⁺/Au⁰ enables continuous control of the CD response (intensity, sign, and position), using L‐ and D‐cysteine as chiral inducers. CD‐based refractive index sensitivity (RIS) measurements reveal a figure of merit (FoM = RIS/linewidth) exceeding 1000 RIU −1 , outperforming the conventional extinction‐based approaches. Thin films of C‐AuNRs fabricated via a layer‐by‐layer assembly retain the bisignate CD response and show RIS values comparable to colloidal samples. These films demonstrate excellent stability, reusability, and resilience in highly absorbing media. All the experimental data are supported by advanced calculations performed using full‐wave M3 Maxwell's solver and using electron tomography reconstructions as direct input. Finally, their applicability in RI‐based quantitative detection of bovine serum albumin (BSA) is demonstrated, highlighting their potential for biomolecular sensing., Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. PID2022-138724NB-I00, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Xunta de Galicia | Ref. GPC ED431B 2025/42, Xunta de Galicia | Ref. GRCED431C2020/09, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Unlocking brightness in CsPbCl3 perovskite nanocrystals: screening ligands and metal halides for effective deep trap passivation

  • Fiuza Maneiro, Nadesh
  • Ye, Junzhi
  • Sharma, Shilendra Kumar
  • Chakraborty, Sudip
  • Gómez Graña, Sergio
  • Hoye, Robert L. Z.
  • Polavarapu , Lakshminarayana
Despite the significant advances made in achieving green (CsPbBr3)- and red (CsPbI3)-emitting halide perovskite nanocrystals (NCs) with high quantum yields and colloidal stability through surface engineering, obtaining bright violet/blue-emitting CsPbCl3 NCs with long-term stability is still a grand challenge due to their defect sensitivity. In this work, we have screened the surface passivation of CsPbCl3 NCs using ligands with different functional groups (amine, sulfonic, and phosphonic acid) and metal halides (mono- and bivalent) with the aim of improving the emission yield and stability of CsPbCl3 NCs. This enabled us to find that phosphonic acids are the ligands that showed the highest efficiency as they occupy Cl vacancies and covalently bind to the Pb on the surface of NCs, together with the incorporation of bivalent metal chlorides that showed substantial enhancements in PLQY. Consequently, the most effective passivators were those that passivate Cl vacancies, indicating these to be among the most detrimental traps. This is further validated through Density Functional Theory (DFT), suggesting that the trend in adsorption energies is as follows: hexylphosphonic < hexylsulfonic < oleylamine < tetrabutyl ammonium, which is also coherent with the charge transfer mechanism and corresponding electronic structure of the halide perovskite surface with the ligands. Furthermore, after evaluating different passivation strategies, we identified in situ passivation as the most effective method for obtaining highly luminescent CsPbCl3 NCs that exhibit stability for over 6 months. Thus, this work is expected to guide the perovskite NC researchers to choose effective passivating agents and passivation strategies toward bright blue luminescent colloidal halide perovskites and beyond., Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Xunta de Galicia | Ref. ED431F 2021/05, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Universidade de Vigo/CISUG
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inducing Efficient and Multiwavelength Circularly Polarized Emission From Perovskite Nanocrystals Using Chiral Metasurfaces

  • Fiuza-Maneiro, Nadesh
  • Mendoza Carreño, José
  • Gómez Graña, Sergio
  • Alonso Carmona, M. Isabel
  • Polavarapu, Lakshminarayana
  • Mihi, Agustín
Chiral nano-emitters have recently received great research attention due to their technological applications and the need for a fundamental scientific understanding of the structure-property nexus of these nanoscale materials. Lead halide perovskite nanocrystals (LHP NCs) with many interesting optical properties have anticipated great promise for generating chiral emission. However, inducing high anisotropy chiral emission from achiral perovskite NCs remains challenging. Although chiral ligands have been used to induce chirality, their anisotropy factors (glum) are low [10-3 to 10-2]. Herein, the generation of high anisotropy circularly polarized photoluminescence (CPL) from LHP NCs is demonstrated using chiral metasurfaces by depositing nanocrystals on top of prefabricated resonant photonic structures (2D gammadion arrays). This scalable approach results in CPL with glum to a record high of 0.56 for perovskite NCs. Furthermore, the differences between high-index dielectric chiral metasurfaces and metallic ones are explored for inducing chiral emission. More importantly, the generation of simultaneous multi-wavelength circularly polarized light is demonstrated by combining dielectric and metallic chiral metasurfaces., N.F.M. and J.M.C. contributed equally to this work. This work had received funding from the Spanish Agencia Estatal de Investigación (AEI/MCIN) through grants, PID2022-141956NB-I00 MCIN/AEI/10.13039/501100011033 (OUTLIGHT), and CEX2023-001263-S (Spanish Severo Ochoa Centre of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). J.M.C. acknowledges an FPI fellowship (PRE2020-09411) from MICINN co-financed by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona UAB. L.P. acknowledges support from the Spanish Ministerio de Ciencia e Innovación through Ramón y Cajal grant (grant no. RYC2018-026103-I), the Spanish State Research Agency (grant nos. PID2020-117371RA-I00 and TED2021-131628A-I00), funded by MICIU/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR, and a grant from the Xunta de Galicia (grant no. ED431F2021/05). S.G.G. acknowledge support by the project CNS2022-135531 (funded by MICIU/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR). This research was also supported by the EIC PATHFINDER CHALLENGES project 101162112 (RADIANT), funded by the European Union. Funding for open access by the Universidade de Vigo/CISUG., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

  • Lafuente, Marta
  • Quesada-González, Daniel
  • Grzelczak, Marek
  • Merkoçi, Arben
  • Montaño-Priede, José Luis
  • Mallada, Reyes
  • Pérez‐Juste, Jorge
  • Pina, María Pilar
  • Polavarapu, Lakshminarayana
  • Pastoriza-Santos, Isabel
This article is part of the themed collections: Nanoscale Horizons HOT Papers, Recent Review Articles and Nanoscale and Nanoscale Horizons: Surface Enhanced Raman Spectroscopy., Lakshminarayana Polavarapu, Isabel Pastoriza Santos, et al., Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches., Krishna Kant acknowledge European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 894227. Lara González-Cabaleiro acknowledge Xunta de Galicia for a predoctoral scholarship (Programa de axudas á etapa predoutoral da Consellería de Cultura, Educación e Universidades da Xunta de Galicia, reference number: 2022/294). Heng Guo and Limei Tian acknowledge the funding from the National Science Foundation (Grant No: 1648451), and the National Institutes of Health (Grant No: R21EB029064 and R35 GM147568). Ramon A. Alvarez-Puebla acknowledges support by the projects PID2020-120306RB-I00 (funded by MCIN/AEI/10.13039/501100011033), PDC2021-121787-I00 (funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR), 2020SGR00166 (funded by Generalitat de Cataluña) and 2021PFR-URV-B2-02 (funded by Universitat Rovira i Virgili). Maria P. Pina acknowledges support from: the European Union's Horizon 2020 research and innovation program under grant agreements No. 883390 (H2020-SU-SECU-2019 SERSing Project), No. 823895 (H2020-MSCA-RISE-2018 SENSOFT), AEI Spain (PID2019-108660RB-I00). Marta Lafuente, thanks Ministerio de Universidades (Spain) and Next Generation EU for the postdoctoral grant “Margarita Salas”. Rizia Bardhana and Siddhant Kothadiya acknowledge support from the National Institutes of Health (NIH) award R01EB029756-01A1 and congressionally directed medical research program (CDMRP) award W81XWH-20-1-0620. Jaebum Choo thanks the financial support from the National Research Foundation of Korea (Grant numbers 2020R1A5A1018052 and RS-2024-00352256). Daniel Quesada-González and Arben Merkoçi acknowledge that the ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033 and Grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU” and Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. Sergio Gómez-Graña acknowledges support by the projects PID2020-117371RA-I00, TED 2021-131628A-I00 and CNS2022-135531 funded by MCIN/AEI/10.13039/501100011033. Soma Venugopal Raoexpresses thanks to Defence Research and Development Organization, India, for the financial support received through ACRHEM [#ERIP/ER/1501138/M/01/319/D(R&D)] and the financial support from the Institute of Eminence (IoE) [ref. No. UOH/IOE/RC1/RC1-20-016]. The IoE project was awarded to the University of Hyderabad by the Ministry of Education, Government of India, per the MHRD notification F11/9/2019-U3(A). Sara Abalde-Cela acknowledges supported by the 3DSecret project, funded by the EU under the program HORIZON-EIC-2022-PATHFINDEROPEN-01-01 (ga 101099066) and by the UK Research and Innovation (UKRI) under the UK government's Horizon Europe funding guarantee (ga 10063360). José Luis Montaño-Priede acknowledges the financial support received from the IKUR Strategy under the collaboration agreement between the Ikerbasque Foundation and Materials Physics Center on behalf of the Department of Education of the Basque Government. Marek Grzelczak acknowledges financial support from EITB Maratoia. Srikanth Singamaneni acknowledges National Science Foundation (CBET-2316285, CBET-2224610) and National Institutes of Health (R21AI178217). L. P. acknowledges support from the Spanish Ministerio de Ciencia e Innovación through Ramón y Cajal grant (grant no. RYC2018-026103-I), the Spanish State Research Agency (grant no. PID2020-117371RA-I00 and TED2021-131628A-I00), and a grant from the Xunta de Galicia (grant no. ED431F2021/05). Jorge Pérez-Juste and Isabel Pastoriza-Santos acknowledge support from MICIU/AEI/10.13039/501100011033 and ERDF/EU (Grant Number: PID2022-138724NB-I00) and the European Innovation Council (Horizon 2020 Project Number: 965018—BIOCELLPHE)., The authors acknowledge the Universidad de Vigo/CSIUG for open access funding., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sign of the Gap Temperature Dependence in CsPb(Br,Cl)3 Nanocrystals Determined by Cs-Rattler-Mediated Electron-Phonon Coupling

  • Fasahat, Shima
  • Fiuza-Maneiro, Nadesh
  • Schäfer, Benedikt
  • Xu, Kai
  • Gómez Graña, Sergio
  • Alonso Carmona, M. Isabel
  • Polavarapu, Lakshminarayana
  • Goñi, Alejandro R.
18 pages, 4 figures, 1 table, So far, the striking sign reversal in the near-ambient slope of the gap temperature dependence of colloidal CsPbCl3 perovskite nanocrystals (NCs) compared to its Br counterpart remains unresolved. Pure bromide NCs exhibit a linear gap increase with increasing temperature, to which thermal expansion and electron-phonon interaction equally contribute. In contrast, the temperature slope for the chlorine compound gap is clearly negative. By combining temperature- and pressure-dependent photoluminescence on a series of CsPb(Br1-xClx)3 NCs, we unravel the origin of such inversion. The electron-phonon interaction is solely responsible, undergoing a sudden change in sign and magnitude due to activation of an anomalous electron-phonon coupling mechanism linked to vibrational modes characterized by synchronous octahedral tilting and Cs rattling. This takes place in the shrunken orthorhombic NC lattice for Cl concentrations exceeding ca. 40%. We have thus clarified a puzzling result directly impacting the optoelectronic properties of lead halide perovskite NCs., The Spanish “Ministerio de Ciencia, Innovación y Universidades” (MICIU) through the Agencia Estatal de Investigación (AEI) is gratefully acknowledged for its support through grant CEX2023-001263-S (MATRANS42) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PID2020-117371RA-I00 (CHIRALPERO), PID2021-128924OB-I00 (ISOSCELLES), PID2022-141956NB-I00 (OUTLIGHT) and TED2021-131628A-I00 (MACLEDS). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444 and the National Network ”Red Perovskitas” (MICIU funded). S.F. acknowledges a FPI grant PRE2021-100097 from MICIU and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which she is enrolled. B.S. acknowledges the support of the Erasmus+ programme of the European Union through the internship project 2022-1-DE01-KA131-HED-000055364 (STREAM 2022). L.P. acknowledges support from the Spanish MICIU through Ramón y Cajal grant (RYC2018-026103-I) and a grant from the Xunta de Galicia (ED431F2021/05). S.G.-G. acknowledges support from project CNS2022-135531 (HARDTOP) funded by 14 MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed