Pasar al contenido principal

DISPOSITIVOS DE PUNTO DE ATENCION BASADOS EN NANOMATERIALES TOTALMENTE INTEGRADOS PARA APLICACIONES DE ATENCION MEDICA

PID2021-124795NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓ INSTITUT CATALÀ DE NANOCIÈNCIA I NANOTECNOLOGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Lateral flow immunoassay for simultaneous detection of C. difficile, MRSA, and K. pneumoniae

  • Rubio-Monterde, Ana|||0000-0003-0068-9621
  • Rivas, Lourdes|||0000-0002-1510-5927
  • Gallegos, Marc
  • Quesada-González, Daniel|||0000-0003-3064-2146
  • Merkoçi, Arben|||0000-0003-2486-8085
Mainly performed within a rapid diagnostic tests company, a lateral flow (LF) system using gold nanoparticles (AuNPs) as transducers is presented able to detect three bacteria of interest, of relevance for antimicrobial resistance (AMR): Clostridioides difficile, methicillin-resistant Staphylococcus aureus (MRSA), and Klebsiella pneumoniae, with a limit of detection of 25 ng/mL of glutamate dehydrogenase (GDH) for C. difficile, 36 ng/mL of penicillin-binding protein 2a (PBP2a) for MRSA, and 4 × 10 CFU/mL for K. pneumoniae. The system showed good results with bacteria culture samples, is user-friendly, and suitable for rapid testing, as the results are obtained within 15 min.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Wearable, battery-free, wireless multiplexed printed sensors for heat stroke prevention with mussel-inspired bio-adhesive membranes

  • Maroli, Gabriel|||0000-0001-8921-4205
  • Rosati, Giulio|||0000-0002-0227-4561
  • Suárez García, Salvio|||0000-0002-4156-0579
  • Bedmar-Romero, Daniel
  • Kobrin, Robert
  • González-Laredo, Álvaro
  • Urban, Massimo|||0000-0001-6083-833X
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Merkoçi, Arben|||0000-0003-2486-8085
Wearable technologies are becoming pervasive in our society, and their development continues to accelerate the untapped potential of continuous and ubiquitous sensing, coupled with big data analysis and interpretation, has only just begun to unfold. However, existing wearable devices are still bulky (mainly due to batteries and electronics) and have suboptimal skin contact. In this work, we propose a novel approach based on a sensor network produced through inkjet printing of nanofunctional inks onto a semipermeable substrate. This network enables real-time monitoring of critical physiological parameters, including temperature, humidity, and muscle contraction. Remarkably, our system operates under battery-free and wireless near-field communication (NFC) technology for data readout via smartphones. Moreover, two of the three sensors were integrated onto a naturally adhesive bioinspired membrane. This membrane, developed using an eco-friendly, high-throughput process, draws inspiration from the remarkable adhesive properties of mussel-inspired molecules. The resulting ultra-conformable membrane adheres effortlessly to the skin, ensuring reliable and continuous data collection. The urgency of effective monitoring systems cannot be overstated, especially in the context of rising heat stroke incidents attributed to climate change and high-risk occupations. Heat stroke manifests as elevated skin temperature, lack of sweating, and seizures. Swift intervention is crucial to prevent progression to coma or fatality. Therefore, our proposed system holds immense promise for the monitoring of these parameters on the field, benefiting both the general population and high-risk workers, such as firefighters.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Plasmonic nanoparticle sensors, current progress, challenges, and future prospects

  • Kant, Krishna
  • Beeram, Reshma
  • Cao, Yi
  • dos Santos, Paulo S. S.
  • González-Cabaleiro, Lara
  • García-Lojo, Daniel|||0000-0002-5477-6299
  • Guo, Heng
  • Joung, Younju
  • Kothadiya, Siddhant
  • Lafuente, Marta|||0000-0003-2660-3726
  • Leong, Yong Xiang
  • Liu, Yiyi
  • Liu, Yuxiong
  • Moram, Sree Satya Bharati
  • Mahasivam, Sanje|||0000-0001-9975-3659
  • Maniappan, Sonia
  • Quesada-González, Daniel|||0000-0003-3064-2146
  • Raj, Divakar
  • Weerathunge, Pabudi
  • Xia, Xinyue
  • Yu, Qian
  • Abalde-Cela, Sara
  • Álvarez Puebla, Ramon A.|||0000-0003-4770-5756
  • Bardhan, Rizia|||0000-0002-5854-652X
  • Bansal, Vipul|||0000-0002-3354-4317
  • Choo, Jaebum|||0000-0003-3864-6459
  • Coelho, Luis C. C.
  • de Almeida, José M. M. M.|||0000-0003-3810-5943
  • Gómez-Graña, Sergio
  • Grzelczak, Marek
  • Herves, Pablo
  • Kumar, Jatish|||0000-0003-3078-6297
  • Lohmueller, Theobald|||0000-0003-2699-7067
  • Merkoçi, Arben|||0000-0003-2486-8085
  • Montaño-Priede, José Luis
  • Ling, Xing Yi|||0000-0001-5495-6428
  • Mallada, Reyes
  • Pérez-Juste, Jorge|||0000-0002-4614-1699
  • Pina, María P.|||0000-0001-9897-6527
  • Singamaneni, Srikanth|||0000-0002-7203-2613
  • Soma, Venugopal Rao
  • Sun, Mengtao|||0000-0002-8153-2679
  • Tian, Limei|||0000-0002-1931-8567
  • Wang, Jianfang|||0000-0002-2467-8751
  • Polavarapu, Lakshminarayana
  • Santos, Isabel Pastoriza|||0000-0002-1091-1364
Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High resolution portable platform for pH sensing via colorimetric fluorescence of carbon dots

  • Minervini, Gianluca|||0000-0001-5607-8868
  • Panniello, Annamaria|||0000-0002-4907-2473
  • Quesada-González, Daniel|||0000-0003-3064-2146
  • Maroli, Gabriel|||0000-0001-8921-4205
  • Fanizza, Elisabetta|||0000-0001-6293-9388
  • Striccoli, Marinella|||0000-0002-5366-691X
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Curri, Maria Lucia|||0000-0002-0261-8379
  • Merkoçi, Arben|||0000-0003-2486-8085
Portable sensing platforms based on nanoparticles are becoming increasingly significant across diverse fields, as they enable real-time measurements in various environments without complex lab protocols. Carbon dots (CDs), known for low toxicity and intense fluorescence, can exhibit pH-dependent optical emission, generally related to proton exchange-capable surface groups. In addition, CDs' hydrophilicity, biocompatibility, and stability make them advantageous for pH sensing and, despite limited application in portable sensing devices, their full potential can be realized with precise control of chemistry and optical properties. In this study, we fabricate a portable nitrocellulose-based platform for pH sensing, expressly designed to take advantage of the fluorescence properties of resorcinol-based CDs. First, responsivity of CDs fluorescence features on pH is carefully spectroscopically characterized and linked to acid-base equilibria of polyphenols (hydroxylated polyaromatic rings) present within the CDs carbonaceous structure. Notably, this also offers a titrimetric method to estimate CD concentration. Next, nitrocellulose-based wax-printed circular pads are functionalized with CDs and integrated with a smartphone-based fluorescence colorimetric optical detection system. The developed portable device exhibits a measurement resolution of ± 0.2 pH units (in the range between 2.5 and 6.7) and of ± 0.3 pH units (in the 6.7 - 7.0 range), compatible with most practical pH measurement needs in biological, food and drink, wastewater sample analysis and others. Moreover, although some portable pH sensing devices are already widespread and commercially available, this platform is easy to use, it necessitates only very small sample volumes and is potentially adaptable to various environments and automated analysis processes that does not need prior-use calibrations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Freestanding laser-induced two dimensional heterostructures for self-contained paper-based sensors

  • Della Pelle, Flavio|||0000-0002-8877-7580
  • Bukhari, Qurat Ul Ain
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Scroccarello, Annalisa
  • Compagnone, Dario|||0000-0001-7849-8943
  • Merkoçi, Arben|||0000-0003-2486-8085
The production of 2D/2D heterostructures (HTs) with favorable electrochemical features is challenging, particularly for semiconductor transition metal dichalcogenides (TMDs). In this studies, we introduce a CO laser plotter-based technology for the realization of HT films comprising reduced graphene oxide (rGO) and 2D-TMDs (MoS, WS, MoSe, and WSe) produced via water phase exfoliation. The strategy relies on the Laser-Induced production of HeterosTructures (LIHTs), where after irradiation the nanomaterials exhibit changes in the morphological and chemical structure, becoming conductive easily transferable nanostructured films. The LIHTs were characterized in detail by SEM, XPS, Raman and electrochemical analysis. The laser treatment induces the conversion of GO into conductive highly exfoliated rGO decorated with homogeneously distributed small TMD/TM-oxide nanoflakes. The freestanding LIHT films obtained were employed to build self-contained sensors onto nitrocellulose, where the HT works both as a transducer and sensing surface. The proposed nitrocellulose-sensor manufacturing process is semi-automated and reproducible, multiple HT films may be produced in the same laser treatment and the stencil-printing allows customizable design. Excellent performance in the electroanalytical detection of different molecules such as dopamine (a neurotransmitter), catechin (a flavonol), and hydrogen peroxide was demonstrated, obtaining nanomolar limits of detection and satisfactory recovery rates in biological and agrifood samples, together with high fouling resistance. Considering the robust and rapid laser-induced production of HTs and the versatility of scribing desired patterns, the proposed approach appears as a disruptive technology for the development of electrochemical devices through sustainable and accessible strategies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

MXenes in healthcare, synthesis, fundamentals and applications

  • Babar, Zaheer Ud Din|||0000-0003-3293-6244
  • Iannotti, Vincenzo|||0000-0001-7229-5045
  • Rosati, Giulio|||0000-0002-0227-4561
  • Zaheer, Ayesha|||0009-0006-7667-6308
  • Velotta, Raffaele|||0000-0003-1077-8353
  • Della Ventura, Bartolomeo|||0000-0003-2920-6187
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Merkoçi, Arben|||0000-0003-2486-8085
Since their discovery over a decade ago, MXenes have transformed the field of "materials for healthcare", stimulating growing interest in their healthcare-related applications. These developments have also driven significant advancements in MXenes' synthesis. This review systematically examines the synthesis of MXenes and their applications in sensing and biomedical fields, underscoring their pivotal role in addressing critical challenges in modern healthcare. We describe the experimental synthesis of MXenes by combining appropriate laboratory modules with the mechanistic principles underlying each synthesis step. In addition, we provide extensive details on the experimental parameters, critical considerations, and essential instructions for successful laboratory synthesis. Various healthcare applications including sensing, biomedical imaging, synergistic therapies, regenerative medicine, and wearable devices have been explored. We further highlight the emerging trends of MXenes, viz., their role as nanovehicles for drug delivery, vectors for gene therapy, and tools for immune profiling. By identifying the important parameters that define the utility of MXenes in biomedical applications, this review outlines strategies to regulate their biomedical profile, thereby serving as a valuable guide to design MXenes with application-specific properties. The final section integrates experimental research with theoretical studies to provide a comprehensive understanding of the field. It examines the role of emerging technologies, such as artificial intelligence (AI) and machine learning (ML), in accelerating material discovery, structure-property optimization, and automation. Complemented by detailed supplementary information on synthesis, stability, biocompatibility, environmental impact, and theoretical insights, this review offers a profound knowledge base for understanding this diverse family of 2D materials. Finally, we compared the potential of MXenes with that of other 2D materials to underscore the existing challenges and prioritize interdisciplinary collaboration. By synthesizing key studies from its discovery to current trends (especially from 2018 onward), this review provides a cohesive assessment of MXene synthesis with theoretical foundations and their prospects in the healthcare sector.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

  • Kant , Krishna
  • Beeram, Reshma
  • Cao, Yi
  • dos Santos, Paulo S. S.
  • Gonzalez Cabaleiro, Lara
  • García Lojo, Daniel
  • Guo, Heng
  • Joung, Younju
  • Kothadiya, Siddhant
  • Lafuente, Marta
  • Leong, Yong Xiang
  • Liu, Yiyi
  • Liu, Yuxiong
  • Moram, Sree Satya Bharati
  • Mahasivam, Sanje
  • Maniappan, Sonia
  • Quesada González, Daniel
  • Raj, Divakar
  • Weerathunge, Pabudi
  • Xia, Xinyue
  • Yu, Qian
  • Abalde Cela, Sara
  • Álvarez Puebla, Ramón Ángel
  • Bardhan, Rizia
  • Bansal, Vipul
  • Choo, Jaebum
  • Coelho, Luis C. C.
  • de Almeida, José M. M. M.
  • Gómez Graña, Sergio
  • Grzelczak, Marek
  • Hervés Beloso, Juan Pablo
  • Kumar, Jatish
  • Lohmueller, Theobald
  • Merkoçi, Arben
  • Montaño Priede, José Luis
  • Ling, Xing Yi
  • Mallada, Reyes
  • Pérez Juste, Jorge
  • Pina, María P.
  • Singamaneni, Srikanth
  • Soma, Venugopal Rao
  • Sun, Mengtao
  • Tian, Limei
  • Wang, Jianfang
  • Polavarapu , Lakshminarayana
  • Pastoriza Santos, Isabel
Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light–matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches., Xunta de Galicia | Ref. 2022/294, Agencia Estatal de Investigación | Ref. PID2020-120306RB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121787-I00, Generalitat de Catalunya | Ref. 2020SGR00166, Universitat Rovira i Virgili | Ref. 2021PFR-URV-B2-02, Agencia Estatal de Investigación | Ref. PID2019-108660RB-I00, Agencia Estatal de Investigación | Ref. PID2021-124795NB-I00, Generalitat de Catalunya | Ref. 2021SGR01464, Agencia Estatal de Investigación | Ref. PID2020-117371RA-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Xunta de Galicia | Ref. ED431F2021/05, Agencia Estatal de Investigación | Ref. PID2022-138724NB-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward next generation lateral flow assays: Integration of nanomaterials

  • Sena-Torralba, Amadeo
  • Álvarez-Diduk, Ruslan
  • Parolo, Claudio
  • Piper, Andrew
  • Merkoçi, Arben
Lateral flow assays (LFAs) are currently the most used point-of-care sensors for both diagnostic (e.g., pregnancy test, COVID-19 monitoring) and environmental (e.g., pesticides and bacterial monitoring) applications. Although the core of LFA technology was developed several decades ago, in recent years the integration of novel nanomaterials as signal transducers or receptor immobilization platforms has brought improved analytical capabilities. In this Review, we present how nanomaterial-based LFAs can address the inherent challenges of point-of-care (PoC) diagnostics such as sensitivity enhancement, lowering of detection limits, multiplexing, and quantification of analytes in complex samples. Specifically, we highlight the strategies that can synergistically solve the limitations of current LFAs and that have proven commercial feasibility. Finally, we discuss the barriers toward commercialization and the next generation of LFAs., We acknowledge financial support to the project AC21_2/00044 (GLEBIOASSAY), funded by Instituto de Salud Carlos III (ISCIII) and cofunded by the European Union, MICROBPREDICT project (European Union Horizon 2020 research and innovation program under grant agreement 825694), and Graphene Flagship Core 3 (European Union Horizon 2020 research and innovation program under grant agreement 881603). ICN2 is funded by CERCA programme, Generalitat de Catalunya. Grant SEV-2017-0706 is funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge the Project PID2021-124795NB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER Una manera de hacer Europa and the project PAPYRUS: Grant PLEC2021-007972 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. The authors acknowledge Consejo Superior de Investigaciones Científicas (CSIC) for the project “COVID19-122” granted in the call “Nuevas ayudas extraordinarias a proyectos de investigación en el marco de las medidas urgentes extraordinarias para hacerfrente al impacto económico y social del COVID-19” (Ayudas CSIC-COVID-19). A.S.-T. acknowledges MINECO for the Juan de la Cierva Formación fellowship (FJC2020-043927-I). C.P. acknowledges the Marie Skłodowska-Curie Actions Individual Fellowship; this project received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement 795635. C.P. (ISGlobal) also acknowledges support from the Spanish Ministry of Science and Innovation** and State Research Agency through the “Centro de Excelencia Severo Ochoa 2019−2023” Program (CEX2018-000806-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Freestanding laser-induced two dimensional heterostructures for self-contained paper-based sensors

  • Della Pelle, Flavio
  • Bukhari, Qurat Ul Ain
  • Álvarez-Diduk, Ruslan
  • Scroccarello, Annalisa
  • Compagnone, Dario
  • Merkoçi, Arben
The production of 2D/2D heterostructures (HTs) with favorable electrochemical features is challenging, particularly for semiconductor transition metal dichalcogenides (TMDs). In this studies, we introduce a CO2 laser plotter-based technology for the realization of HT films comprising reduced graphene oxide (rGO) and 2D-TMDs (MoS2, WS2, MoSe2, and WSe2) produced via water phase exfoliation. The strategy relies on the Laser-Induced production of HeterosTructures (LIHTs), where after irradiation the nanomaterials exhibit changes in the morphological and chemical structure, becoming conductive easily transferable nanostructured films. The LIHTs were characterized in detail by SEM, XPS, Raman and electrochemical analysis. The laser treatment induces the conversion of GO into conductive highly exfoliated rGO decorated with homogeneously distributed small TMD/TM-oxide nanoflakes. The freestanding LIHT films obtained were employed to build self-contained sensors onto nitrocellulose, where the HT works both as a transducer and sensing surface. The proposed nitrocellulose-sensor manufacturing process is semi-automated and reproducible, multiple HT films may be produced in the same laser treatment and the stencil-printing allows customizable design. Excellent performance in the electroanalytical detection of different molecules such as dopamine (a neurotransmitter), catechin (a flavonol), and hydrogen peroxide was demonstrated, obtaining nanomolar limits of detection and satisfactory recovery rates in biological and agrifood samples, together with high fouling resistance. Considering the robust and rapid laser-induced production of HTs and the versatility of scribing desired patterns, the proposed approach appears as a disruptive technology for the development of electrochemical devices through sustainable and accessible strategies., This research was funded by the European Union – Next Generation EU. Project Code: ECS00000041; Project CUP: C43C22000380007; Project Title: Innovation, digitalization and sustainability for the diffused economy in Central Italy – VITALITY. F. D. P. and D. C. acknowledge the Ministry of Education, University and Research (MIUR) and European Social Fund (ESF) for the PON R&I 2014–2020 program, action 1.2 ‘AIM: Attraction and International Mobility’ (AIM1894039-3). ICN2 acknowledges funding from the European Union Horizon 2020 Programme under Grant No. 881603 (Graphene Flagship Core 3). ICN2 is funded by CERCA programme, Generalitat de Catalunya. Grant SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge the project PID2021-124795NB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER Una manera de hacer Europa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-Step Laser Nanostructuration of Reduced Graphene Oxide Films Embedding Metal Nanoparticles for Sensing Applications

  • Scroccarello, Annalisa
  • Álvarez-Diduk, Ruslan
  • Della Pelle, Flavio
  • Castro Silva, Cecilia de Carvalho
  • Idili, Andrea
  • Parolo, Claudio
  • Compagnone, Dario
  • Merkoçi, Arben
The combination of two-dimensional materials and metal nanoparticles (MNPs) allows the fabrication of novel nanocomposites with unique physical/chemical properties exploitable in high-performance smart devices and biosensing strategies. Current methods to obtain graphene-based films decorated with noble MNPs are cumbersome, poorly reproducible, and difficult to scale up. Herein, we propose a straightforward, versatile, surfactant-free, and single-step technique to produce reduced graphene oxide (rGO) conductive films integrating "naked" noble MNPs. This method relies on the instantaneous laser-induced co-reduction of graphene oxide and metal cations, resulting in highly exfoliated rGO nanosheets embedding gold, silver, and platinum NPs. The production procedure has been optimized, and the obtained nanomaterials are fully characterized; the hybrid nanosheets have been easily transferred onto lab-made screen-printed electrodes preserving their nanoarchitecture. The Au@rGO-, Ag@rGO-, and Pt@rGO-based electrodes have been challenged to detect caffeic acid, nitrite, and hydrogen peroxide in model solutions and real samples. The sensors yielded quantitative responses (R2 ≥ 0.997) with sub-micromolar limits of detections (LODs ≤ 0.6 μM) for all the analytes, allowing accurate quantification in samples (recoveries ≥ 90%; RSD ≤ 14.8%, n = 3). This single-step protocol which requires low cost and minimal equipment will allow the fabrication of free-standing, MNP-embedded rGO films integrable into a variety of scalable smart devices and biosensors., R.A.-D. acknowledges funding from the European Union Horizon 2020 Programme under grant no. 881603 (Graphene Flagship Core 3). ICN2 is funded by CERCA Programme, Generalitat de Catalunya. Grant SEV-2017-0706 is funded by MCIN/AEI/10.13039/501100011033. The authors also acknowledge the project PID2021-124795NB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER Una manera de hacer Europa. F.D.P. and D.C. acknowledge the Ministry of Education, University and Research (MIUR) and European Social Fund (ESF) for the PON R&I 2014e2020 program, action 1.2 0AIM: Attraction and International Mobility’ (AIM1894039-3). C.C.C.S. acknowledges funding through CAPES─PRINT (Programa Institucional de Internacionalização; grant #88887.310281/2018-00 and 88887.467442/2019-00) and Mackpesquisa-UPM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward Integrated Molecular Lateral Flow Diagnostic Tests Using Advanced Micro- and Nanotechnology

  • Rubio-Monterde, Ana
  • Quesada-González, Daniel
  • Merkoçi, Arben
We acknowledge the funding received from Ministerio de Ciencia e Innovación (Madrid, Spain), which included grants PTQ2018-010113 “IRON” and DIN2018-010115 “LáMiNa”. ICN2 is funded by CERCA programme, Generalitat de Catalunya. Grant SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033. Grant PID2021-124795NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An artificial miniaturized peroxidase for signal amplification in lateral flow immunoassays

  • Renzi, Emilia
  • Piper, Andrew
  • Nastri, Flavia
  • Merkoçi, Arben
  • Lombardi, Angela
Signal amplification strategies are widely used for improving the sensitivity of lateral flow immunoassays (LFiAs). Herein, the artificial miniaturized peroxidase Fe(III)-MimochromeVI*a (FeMC6*a), immobilized on gold nanoparticles (AuNPs), is used as a strategy to obtain catalytic signal amplification in sandwich immunoassays on lateral flow strips. The assay scheme uses AuNPs decorated with the mini-peroxidase FeMC6*a and anti-human-IgG as a detection antibody (dAb), for the detection of human-IgG, as a model analyte. Recognition of the analyte by the capture and detection antibodies is first evidenced by the appearance of a red color in the test line (TL), due to the accumulation of AuNPs. Subsequent addition of 3,3′,5,5′-tetramethylbenzidine (TMB) induces an increase of the test line color, due to the TMB being converted into an insoluble colored product, catalyzed by FeMC6*a. This work shows that FeMC6*a acts as an efficient catalyst in paper, increasing the sensitivity of an LFiA up to four times with respect to a conventional LFiA. Furthermore, FeMC6*a achieves lower limits of detection that are found in control experiments where it is replaced with horseradish peroxidase (HRP), its natural counterpart. This study represents a significant proof-of-concept for the development of more sensitive LFiAs, for different analytes, based on properly designed artificial metalloenzymes., This work was supported by Campania Region “Programma Operativo FESR Campania 2014–2020, Asse 1”, [CUP B63D18000350007], ICN2 funded by CERCA programme, Generalitat de Catalunya and Grant PID2021-124795NB-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., Open access funding provided by Universita degli Studi di Napoli Federico II within the CRUI-CARE agreement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The cleanroom-free, cheap, and rapid fabrication of nanoelectrodes with low zM limits of detection

  • Maroli, Gabriel
  • Abarintos, Vernalyn
  • Piper, Andrew
  • Merkoçi, Arben
Nanoscale electrodes have been a topic of intense research for many decades. Their enhanced sensitivities, born out of an improved signal-to-noise ratio as electrode dimensions decrease, make them ideal for the development of low-concentration analyte sensors. However, to date, nanoelectrode fabrication has typically required expensive equipment and exhaustive, time-consuming fabrication methods that have rendered them unsuitable for widespread use and commercialization. Herein, a method of nanoband electrode fabrication using low cost materials and equipment commonly found in research laboratories around the world is reported. The materials' cost to produce each nanoband is less than €0.01 and fabrication of a batch takes less than 1 h. The devices can be made of flexible plastics and their designs can be quickly and easily iterated. Facile methods of combining these nanobands into powerful devices, such as complete three-electrode systems, are also displayed. As a proof of concept, the electrodes are functionalized for the detection of a DNA sequence specific to SARS-CoV-2 and found to display single molecule sensitivity., ICN2 is funded by CERCA programme, Generalitat de Catalunya Grant SEV-2017-0706 funded by MCIN/AEI/ 10.13039/501100011033. Funding for this project was obtained from Grant PID2021-124795NB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. V.A. acknowledges the support and funding by the Department of Science and Technology – Science Education Institute (DOST-SEI) of the Philippines. G.M. would like to express his gratitude to the Carolina Foundation for financial support through the scholarship “Doctorado 2020.” G.M. acknowledges Universitat Autonoma de Barcelona (UAB) for the possibility of performing this work inside the framework of Chemistry PhD Programme. V.A. acknowledges Universitat Autonoma de Barcelona (UAB) for the possibility of performing this work inside the framework of Biotechnology PhD Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unleashing inkjet-printed nanostructured electrodes and battery-free potentiostat for the DNA-based multiplexed detection of SARS-CoV-2 genes

  • Rossetti, Marianna
  • Srisomwat, Chawin
  • Urban, Massimo
  • Rosati, Giulio
  • Maroli, Gabriel
  • Yaman Akbay, Hatice Gödze
  • Chailapakul, Orawon
  • Merkoçi, Arben
Following the global COVID-19 pandemic triggered by SARS-CoV-2, the need for rapid, specific and cost-effective point-of-care diagnostic solutions remains paramount. Even though COVID-19 is no longer a public health emergency, the disease still poses a global threat leading to deaths, and it continues to change with the risk of new variants emerging causing a new surge in cases and deaths. Here, we address the urgent need for rapid, cost-effective and point-of-care diagnostic solutions for SARS-CoV-2. We propose a multiplexed DNA-based sensing platform that utilizes inkjet-printed nanostructured gold electrodes and an inkjet-printed battery-free near-field communication (NFC) potentiostat for the simultaneous quantitative detection of two SARS-CoV-2 genes, the ORF1ab and the N gene. The detection strategy based on the formation of an RNA-DNA sandwich structure leads to a highly specific electrochemical output. The inkjet-printed nanostructured gold electrodes providing a large surface area enable efficient binding and increase the sensitivity. The inkjet-printed battery-free NFC potentiostat enables rapid measurements and real-time data analysis via a smartphone application, making the platform accessible and portable. With the advantages of speed (5 min), simplicity, sensitivity (low pM range, ∼450% signal gain) and cost-effectiveness, the proposed platform is a promising alternative for point-of-care diagnostics and high-throughput analysis that complements the COVID-19 diagnostic toolkit., ICN2 is funded by CERCA programme, Generalitat de Catalunya. Grant SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033. This project was in part supported from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101008701 (Project EMERGE), from PID2021-124795NB-I00 funded by MCIN/AEI/10.13039/501100011033 and from “ERDF A way of making Europe”. M.R. is supported from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 101029884 (SERENA). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union. The European Union can not be held responsible for them. M.U. has carried out the work within the framework of the doctoral program ‘Doctorado en Biotecnología’ from the Universitat Autònoma de Barcelona. G.M. would like to express his gratitude to the Carolina Foundation for financial support through the scholarship “Doctorado 2020.” G.M. acknowledges Universitat Autonoma de Barcelona (UAB) for the possibility of performing this work inside the framework of Chemistry PhD Programme. C.S. and O.C. would like to thank the National Research Council of Thailand (NRCT) through the Royal Golden Jubilee Ph.D. program (grant number PHD/0016/2561) and the Distinguished Research Professor Grant, the National Research Council of Thailand (NRCT) through the grant number N41A640073., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructure tuning of gold nanoparticles films via click sintering

  • Urban, Massimo
  • Rosati, Giulio
  • Maroli, Gabriel
  • Della Pelle, Flavio
  • Bonini, Andrea
  • Sajti, Laszlo
  • Fedel, Mariangela
  • Merkoçi, Arben
Colloidal metal nanoparticles dispersions are commonly used to create functional printed electronic devices and they typically require time-, energy- and equipment-consuming post-treatments to improve their electrical and mechanical properties. Traditional methods, e.g. thermal, UV/IR, and microwave treatments, limit the substrate options and may require expensive equipment, not available in all the laboratories. Moreover, these processes also cause the collapse of the film (nano)pores and interstices, limiting or impeding its nanostructuration. Finding a simple approach to obtain complex nanostructured materials with minimal post-treatments remains a challenge. In this study, a new sintering method for gold nanoparticle inks that called as “click sintering” has been reported. The method uses a catalytic reaction to enhance and tune the nanostructuration of the film while sintering the metallic nanoparticles, without requiring any cumbersome post-treatment. This results in a conductive and electroactive nanoporous thin film, whose properties can be tuned by the conditions of the reaction, i.e., concentration of the reagent and time. Therefore, this study presents a novel and innovative one-step approach to simultaneously sinter gold nanoparticles films and create functional nanostructures, directly and easily, introducing a new concept of real-time treatment with possible applications in the fields of flexible electronics, biosensing, energy, and catalysis., The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101008701. Views and opinions expressed were however those of the author(s) only and did not necessarily reflect those of the European Union. The European Union could not be held responsible for them. PID2021-124795NB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. This work has been carried out within the framework of the doctoral program ‘Doctorado en Biotecnologia’ from the Universitat Autonoma de Barcelona. G.M. acknowledges the Fundación Carolina for the Doctoral Scholarship granted under the program “Doctorado 2020”. F.D.P. acknowledge the Ministry of Education, University and Research (MIUR) and European Social Fund (ESF) for the PON R&I 2014–2020 program, action 1.2 “AIM: Attraction and International Mobility” (AIM1894039-3). A.B. is supported by the ERASMUS+ mobility program during the doctoral school in Chemistry and Material Science (DSCM) at the Department of Chemistry and Industrial Chemistry, University of Pisa (UNIPI), Italy., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct writing of graphene electrodes for point-of-care electrochemical sensing applications

  • Zhao, Lei
  • Piper, Andrew
  • Rosati, Giulio
  • Merkoçi, Arben
Electrochemical sensors are increasingly garnering attention as valuable tools for point-of-care (POC) testing due to their low costs, high sensitivities, and ease of miniaturization. Graphene-based materials, renowned for their tunable electrical conductivity, high specific surface areas, versatile functionality, and biocompatibility; are highly suited for the fabrication of electrochemical sensors with heightened sensitivities. Non-contact, maskless, direct writing methods allow the rapid, large-scale production of graphene electrodes with high design flexibility. Researchers globally are advancing graphene electrode production, aiming for smaller, faster, and more efficient sensors. This review provides a comprehensive overview of recent advances on the direct writing of graphene electrodes for electrochemical sensing applications. It covers the basics of direct writing techniques, the advancements in graphene ink/precursor preparation, structural design, and device integration, with a focus on POC platforms., ICN2 is funded by CERCA programme, Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464 and Grant PID2021-124795NB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe. Lei Zhao acknowledge the financial support from China Scholarship Council (CSC) and the Fundamental Research Funds for the Central Universities. This project has received funding from the EMERGE project, European Union's Horizon 2020 research and innovation programme, under Grant Agreement No. 101008701. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser-assembled conductive 3D nanozyme film-based nitrocellulose sensor for real-time detection of H2O2 released from cancer cells

  • Bukhari, Qurat Ul Ain
  • Della Pelle, Flavio
  • Álvarez-Diduk, Ruslan
  • Scroccarello, Annalisa
  • Nogués, Carme
  • Careta, Oriol
  • Compagnone, Dario
  • Merkoçi, Arben
In this work, a nanostructured conductive film possessing nanozyme features was straightforwardly produced via laser-assembling and integrated into complete nitrocellulose sensors; the cellulosic substrate allows to host live cells, while the nanostructured film nanozyme activity ensures the enzyme-free real-time detection of hydrogen peroxide (H2O2) released by the sames. In detail, a highly exfoliated reduced graphene oxide 3D film decorated with naked platinum nanocubes was produced using a CO2-laser plotter via the simultaneous reduction and patterning of graphene oxide and platinum cations; the nanostructured film was integrated into a nitrocellulose substrate and the complete sensor was manufactured using an affordable semi-automatic printing approach. The linear range for the direct H2O2 determination was 0.5–80 μM (R2 = 0.9943), with a limit of detection of 0.2 μM. Live cell measurements were achieved by placing the sensor in the culture medium, ensuring their adhesion on the sensors' surface; two cell lines were used as non-tumorigenic (Vero cells) and tumorigenic (SKBR3 cells) models, respectively. Real-time detection of H2O2 released by cells upon stimulation with phorbol ester was carried out; the nitrocellulose sensor returned on-site and real-time quantitative information on the H2O2 released proving useful sensitivity and selectivity, allowing to distinguish tumorigenic cells. The proposed strategy allows low-cost in-series semi-automatic production of paper-based point-of-care devices using simple benchtop instrumentation, paving the way for the easy and affordable monitoring of the cytopathology state of cancer cells., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Graphene Flagship grant agreement no. 881603. The support received is also acknowledged by R. Alvarez. The ICN2is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. This research was funded by the European Union – Next Generation EU. Project Code: ECS00000041; Project CUP: C43C22000380007; Project Title: Innovation, digitalization and sustainability for the diffused economy in Central Italy – VITALITY. F.D.P. and D.C. acknowledge the Ministry of Education, University and Research (MIUR) and European Social Fund (ESF) for the PON R&I 2014–2020 program, action 1.2 ′AIM: Attraction and International Mobility’ (AIM1894039-3). We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464 and 2021 SGR 00122 and Grant PID2021-124795NB-I00 and PID2020-116844RB-C21 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lateral flow immunoassay for simultaneous detection of C. difficile, MRSA, and K. pneumoniae

  • Rubio-Monterde, Ana
  • Rivas, Lourdes
  • Gallegos, Marc
  • Quesada-González, Daniel
  • Merkoçi, Arben
Mainly performed within a rapid diagnostic tests company, a lateral flow (LF) system using gold nanoparticles (AuNPs) as transducers is presented able to detect three bacteria of interest, of relevance for antimicrobial resistance (AMR): Clostridioides difficile, methicillin-resistant Staphylococcus aureus (MRSA), and Klebsiella pneumoniae, with a limit of detection of 25 ng/mL of glutamate dehydrogenase (GDH) for C. difficile, 36 ng/mL of penicillin-binding protein 2a (PBP2a) for MRSA, and 4 × 106 CFU/mL for K. pneumoniae. The system showed good results with bacteria culture samples, is user-friendly, and suitable for rapid testing, as the results are obtained within 15 min., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., This work is part of the ANTI-SUPERBUGS PCP project [19] that has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement 688878. Inside ANTI-SUPERBUGS project, we thank our BugWatcher Consortium partners, NuWave Sensors and Grupo Pulso from Evidenze group, for their support during the project. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. We also thank the funding received from Ministerio de Ciencia e Innovación (Madrid, Spain), which included grants PTQ2018-010113 “IRON” and DIN2018-010115 “LaMiNa,” and Grant PID2021-124795NB-I00 funded by MICIU/AEI/https://doi.org/10.13039/501100011033 and by “ERDF/EU.”, With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

  • Lafuente, Marta
  • Quesada-González, Daniel
  • Grzelczak, Marek
  • Merkoçi, Arben
  • Montaño-Priede, José Luis
  • Mallada, Reyes
  • Pérez‐Juste, Jorge
  • Pina, María Pilar
  • Polavarapu, Lakshminarayana
  • Pastoriza-Santos, Isabel
This article is part of the themed collections: Nanoscale Horizons HOT Papers, Recent Review Articles and Nanoscale and Nanoscale Horizons: Surface Enhanced Raman Spectroscopy., Lakshminarayana Polavarapu, Isabel Pastoriza Santos, et al., Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches., Krishna Kant acknowledge European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 894227. Lara González-Cabaleiro acknowledge Xunta de Galicia for a predoctoral scholarship (Programa de axudas á etapa predoutoral da Consellería de Cultura, Educación e Universidades da Xunta de Galicia, reference number: 2022/294). Heng Guo and Limei Tian acknowledge the funding from the National Science Foundation (Grant No: 1648451), and the National Institutes of Health (Grant No: R21EB029064 and R35 GM147568). Ramon A. Alvarez-Puebla acknowledges support by the projects PID2020-120306RB-I00 (funded by MCIN/AEI/10.13039/501100011033), PDC2021-121787-I00 (funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR), 2020SGR00166 (funded by Generalitat de Cataluña) and 2021PFR-URV-B2-02 (funded by Universitat Rovira i Virgili). Maria P. Pina acknowledges support from: the European Union's Horizon 2020 research and innovation program under grant agreements No. 883390 (H2020-SU-SECU-2019 SERSing Project), No. 823895 (H2020-MSCA-RISE-2018 SENSOFT), AEI Spain (PID2019-108660RB-I00). Marta Lafuente, thanks Ministerio de Universidades (Spain) and Next Generation EU for the postdoctoral grant “Margarita Salas”. Rizia Bardhana and Siddhant Kothadiya acknowledge support from the National Institutes of Health (NIH) award R01EB029756-01A1 and congressionally directed medical research program (CDMRP) award W81XWH-20-1-0620. Jaebum Choo thanks the financial support from the National Research Foundation of Korea (Grant numbers 2020R1A5A1018052 and RS-2024-00352256). Daniel Quesada-González and Arben Merkoçi acknowledge that the ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033 and Grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU” and Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. Sergio Gómez-Graña acknowledges support by the projects PID2020-117371RA-I00, TED 2021-131628A-I00 and CNS2022-135531 funded by MCIN/AEI/10.13039/501100011033. Soma Venugopal Raoexpresses thanks to Defence Research and Development Organization, India, for the financial support received through ACRHEM [#ERIP/ER/1501138/M/01/319/D(R&D)] and the financial support from the Institute of Eminence (IoE) [ref. No. UOH/IOE/RC1/RC1-20-016]. The IoE project was awarded to the University of Hyderabad by the Ministry of Education, Government of India, per the MHRD notification F11/9/2019-U3(A). Sara Abalde-Cela acknowledges supported by the 3DSecret project, funded by the EU under the program HORIZON-EIC-2022-PATHFINDEROPEN-01-01 (ga 101099066) and by the UK Research and Innovation (UKRI) under the UK government's Horizon Europe funding guarantee (ga 10063360). José Luis Montaño-Priede acknowledges the financial support received from the IKUR Strategy under the collaboration agreement between the Ikerbasque Foundation and Materials Physics Center on behalf of the Department of Education of the Basque Government. Marek Grzelczak acknowledges financial support from EITB Maratoia. Srikanth Singamaneni acknowledges National Science Foundation (CBET-2316285, CBET-2224610) and National Institutes of Health (R21AI178217). L. P. acknowledges support from the Spanish Ministerio de Ciencia e Innovación through Ramón y Cajal grant (grant no. RYC2018-026103-I), the Spanish State Research Agency (grant no. PID2020-117371RA-I00 and TED2021-131628A-I00), and a grant from the Xunta de Galicia (grant no. ED431F2021/05). Jorge Pérez-Juste and Isabel Pastoriza-Santos acknowledge support from MICIU/AEI/10.13039/501100011033 and ERDF/EU (Grant Number: PID2022-138724NB-I00) and the European Innovation Council (Horizon 2020 Project Number: 965018—BIOCELLPHE)., The authors acknowledge the Universidad de Vigo/CSIUG for open access funding., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduced graphene oxide electrodes meet lateral flow assays: A promising path to advanced point-of-care diagnostics

  • Calucho, Enric
  • Álvarez-Diduk, Ruslan
  • Piper, Andrew
  • Rossetti, Marianna
  • Nevanen, Tarja K.
  • Merkoçi, Arben
Research in electrochemical detection in lateral flow assays (LFAs) has gained significant momentum in recent years. The primary impetus for this surge in interest is the pursuit of achieving lower limits of detection, especially given that LFAs are the most widely employed point-of-care biosensors. Conventionally, the strategy for merging electrochemistry and LFAs has centered on the superposition of screen-printed electrodes onto nitrocellulose substrates during LFA fabrication. Nevertheless, this approach poses substantial limitations regarding scalability. In response, we have developed a novel method for the complete integration of reduced graphene oxide (rGO) electrodes into LFA strips. We employed a CO2 laser to concurrently reduce graphene oxide and pattern nitrocellulose, exposing its backing to create connection sites impervious to sample leakage. Subsequently, rGO and nitrocellulose were juxtaposed and introduced into a roll-to-roll system using a wax printer. The exerted pressure facilitated the transfer of rGO onto the nitrocellulose. We systematically evaluated several electrochemical strategies to harness the synergy between rGO and LFAs. While certain challenges persist, our rGO transfer technology presents compelling potential for setting a new standard in electrochemical LFA fabrication., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Graphene Flagship grant agreement no. 881603. The support received is also acknowledged by R. Alvarez. Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union. The European Union cannot be held responsible for them. This project has received funding from the European Union’s Horizon Europe – the Framework Programme for Research and Innovation (2021–2027) under grant agreement No 101120706. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. E. Calucho acknowledges Ministerio de Ciencia e Innovación of Spain and Fondo Social Europeo for the Fellowship PRE2018-084856 awarded under the call “Ayudas para contratos predoctorales para la formación de doctors, Subprograma Estatal de Formación del Programa Estatal de Promoción del Talento y su Empleabilidad en I + D + i”, under the framework of “Plan Estatal de Investigación Científica y Técnica y de Innovación 2017–2020”. E. Calucho also acknowledges Universitat Autònoma de Barcelona (UAB) for the possibility of performing this work inside the framework of Biotechnology PhD Programme. M. Rossetti is supported from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 101029884 (SERENA). We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464 and Grant PID2021-124795NB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wearable, battery-free, wireless multiplexed printed sensors for heat stroke prevention with mussel-inspired bio-adhesive membranes

  • Maroli, Gabriel
  • Rosati, Giulio
  • Suárez-García, Salvio
  • Bedmar-Romero, Daniel
  • Kobrin, Robert
  • González-Laredo, Álvaro
  • Urban, Massimo
  • Álvarez-Diduk, Ruslan
  • Ruiz Molina, Daniel
  • Merkoçi, Arben
Wearable technologies are becoming pervasive in our society, and their development continues to accelerate the untapped potential of continuous and ubiquitous sensing, coupled with big data analysis and interpretation, has only just begun to unfold. However, existing wearable devices are still bulky (mainly due to batteries and electronics) and have suboptimal skin contact. In this work, we propose a novel approach based on a sensor network produced through inkjet printing of nanofunctional inks onto a semipermeable substrate. This network enables real-time monitoring of critical physiological parameters, including temperature, humidity, and muscle contraction. Remarkably, our system operates under battery-free and wireless near-field communication (NFC) technology for data readout via smartphones. Moreover, two of the three sensors were integrated onto a naturally adhesive bioinspired membrane. This membrane, developed using an eco-friendly, high-throughput process, draws inspiration from the remarkable adhesive properties of mussel-inspired molecules. The resulting ultra-conformable membrane adheres effortlessly to the skin, ensuring reliable and continuous data collection. The urgency of effective monitoring systems cannot be overstated, especially in the context of rising heat stroke incidents attributed to climate change and high-risk occupations. Heat stroke manifests as elevated skin temperature, lack of sweating, and seizures. Swift intervention is crucial to prevent progression to coma or fatality. Therefore, our proposed system holds immense promise for the monitoring of these parameters on the field, benefiting both the general population and high-risk workers, such as firefighters., The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 has been supported by the Severo Ochoa Centres of Excellence programme [SEV-2017-0706] and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MICIU/AEI/10.13039/501100011033. The MIaSkin project has been funded by the ICN2 Severo Ochoa Seed Funding for Emerging Topics 2021 Program. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101008701. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. The European Union can not be held responsible for them. We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. This work was supported by grantsPID2021-124795NB-I00 and PID2021-127983OB-C21 financed by MICIU/AEI/10.13039/501100011033 and ERDF “A way to make Europe”. G.M. would like to express his gratitude to the Carolina Foundation for financial support through the scholarship “Doctorado 2020”. G.M. acknowledges Universitat Autonoma de Barcelona (UAB) for the possibility of performing this work inside the framework of Chemistry PhD Programme. G.M. thanks Patricia Batista Deroco and Lei Zaho for their advice on the Dimatix printer. G.M. thanks Nerea de Mariscal i Molinas for her help in filming the S.I. video., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (SEV-2017-0706), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MXenes in healthcare: synthesis, fundamentals and applications

  • Babar, Zaheer Ud Din
  • Iannotti, Vincenzo
  • Rosati, Giulio
  • Zaheer, Ayesha
  • Velotta, Raffaele
  • Della Ventura, Bartolomeo
  • Álvarez-Diduk, Ruslan
  • Merkoçi, Arben
Since their discovery over a decade ago, MXenes have transformed the field of "materials for healthcare", stimulating growing interest in their healthcare-related applications. These developments have also driven significant advancements in MXenes' synthesis. This review systematically examines the synthesis of MXenes and their applications in sensing and biomedical fields, underscoring their pivotal role in addressing critical challenges in modern healthcare. We describe the experimental synthesis of MXenes by combining appropriate laboratory modules with the mechanistic principles underlying each synthesis step. In addition, we provide extensive details on the experimental parameters, critical considerations, and essential instructions for successful laboratory synthesis. Various healthcare applications including sensing, biomedical imaging, synergistic therapies, regenerative medicine, and wearable devices have been explored. We further highlight the emerging trends of MXenes, viz., their role as nanovehicles for drug delivery, vectors for gene therapy, and tools for immune profiling. By identifying the important parameters that define the utility of MXenes in biomedical applications, this review outlines strategies to regulate their biomedical profile, thereby serving as a valuable guide to design MXenes with application-specific properties. The final section integrates experimental research with theoretical studies to provide a comprehensive understanding of the field. It examines the role of emerging technologies, such as artificial intelligence (AI) and machine learning (ML), in accelerating material discovery, structure-property optimization, and automation. Complemented by detailed supplementary information on synthesis, stability, biocompatibility, environmental impact, and theoretical insights, this review offers a profound knowledge base for understanding this diverse family of 2D materials. Finally, we compared the potential of MXenes with that of other 2D materials to underscore the existing challenges and prioritize interdisciplinary collaboration. By synthesizing key studies from its discovery to current trends (especially from 2018 onward), this review provides a cohesive assessment of MXene synthesis with theoretical foundations and their prospects in the healthcare sector., Zaheer Ud din Babar acknowledges Scuola Superiore Meridional (SSM), University of Naples, Federico-II, Naples, Italy, for funding his stay as a visiting PhD scholar at the Catala Institute of Nanoscience and Nanotechnology (ICN2), Campus UAB, 08193 Bellaterra, Barcelona, Spain. The authors are thankful to all individuals and/or organizations who provided permission to republish/reproduced their figures and other relevant information. This project has received funding from the European Union’s Horizon Europe – the Framework Programme for Research and Innovation (2021–2027) under grant agreement No 101120706. The views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. We also acknowledge grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/ 501100011033 and by ‘‘ERDF/EU’’, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantum dots for biosensing: Classification and applications

  • Quesada-González, Daniel
  • Merkoçi, Arben
Quantum dots (QDs) are the smallest nanomaterials (2-10 nm), with unique optical and electronic properties. Thanks to these properties, QDs have been standing during the last years as signal tags for different applications, including bioimaging, fluorescent biosensors and electrochemical assays. In this review, we explore the current state-of-the art on these nanomaterials, differentiating them between semiconductor and carbon-based QDs. Also, the review focuses on their unique advantages as transducers in different biosensing platforms., The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. This publication is part of the Grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”. We also acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. The authors thank Dámaso Torres Navarro, graphic designer at ICN2, for drawing F ig. 1 and graphical abstract. Daniel Quesada-González also wants to thank his wife Leyla Karadurmuş for all her support and love, and also Haku, for trying not to walk on the keyboard or bite the screen (so often) while Daniel was working on this review (Haku is a cat)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High resolution portable platform for pH sensing via colorimetric fluorescence of carbon dots

  • Minervini, Gianluca
  • Panniello, Annamaria
  • Quesada-González, Daniel
  • Maroli, Gabriel
  • Fanizza, Elisabetta
  • Striccoli, Marinella
  • Álvarez-Diduk, Ruslan
  • Curri, Maria Lucia
  • Merkoçi, Arben
Portable sensing platforms based on nanoparticles are becoming increasingly significant across diverse fields, as they enable real-time measurements in various environments without complex lab protocols. Carbon dots (CDs), known for low toxicity and intense fluorescence, can exhibit pH-dependent optical emission, generally related to proton exchange-capable surface groups. In addition, CDs’ hydrophilicity, biocompatibility, and stability make them advantageous for pH sensing and, despite limited application in portable sensing devices, their full potential can be realized with precise control of chemistry and optical properties. In this study, we fabricate a portable nitrocellulose-based platform for pH sensing, expressly designed to take advantage of the fluorescence properties of resorcinol-based CDs. First, responsivity of CDs fluorescence features on pH is carefully spectroscopically characterized and linked to acid-base equilibria of polyphenols (hydroxylated polyaromatic rings) present within the CDs carbonaceous structure. Notably, this also offers a titrimetric method to estimate CD concentration. Next, nitrocellulose-based wax-printed circular pads are functionalized with CDs and integrated with a smartphone-based fluorescence colorimetric optical detection system. The developed portable device exhibits a measurement resolution of ± 0.2 pH units (in the range between 2.5 and 6.7) and of ± 0.3 pH units (in the 6.7 – 7.0 range), compatible with most practical pH measurement needs in biological, food and drink, wastewater sample analysis and others. Moreover, although some portable pH sensing devices are already widespread and commercially available, this platform is easy to use, it necessitates only very small sample volumes and is potentially adaptable to various environments and automated analysis processes that does not need prior-use calibrations., The ICN2 is funded by the CERCA programme / Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. We also acknowledge grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”. This research was funded by the Italian MIUR PRIN 2022 SuperNano Project Prot. no. 2022C7Z2RA and by the Project ‘‘Network 4 Energy Sustainable Transition − NEST’’, code PE0000021, Concession Decree No. 1561 of 11.10.2022 of MUR (CUP B53C22004060006), financed by the European Union − NextGenerationEU under the National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment. M.Striccoli is grateful to the COSY Action CA21101 financed by the European Cooperation in Science and Technology (COST) programme. G. Maroli would like to express his gratitude to the Carolina Foundation for financial support through the scholarship “Doctorado 2020”. G.Maroli acknowledges Universitat Autonoma de Barcelona (UAB) for the possibility of performing this work inside the framework of Chemistry PhD Programme., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stability matters: evaluating the long-term performance of AuNP-DNA conjugates in lateral flow assays through varied conjugation methods and storage buffers

  • Fuentes-Chust, Celia
  • Parolo, Claudio
  • Piper, Andrew
  • Merkoçi, Arben
This study evaluates five distinct conjugation techniques for attaching DNA to gold nanoparticles (AuNPs), focusing on their applicability in lateral flow assays (LFA). The selected methods include three salt-aging techniques, one polyT-adsorption method, and a rapid butanol dehydration (INDEBT) approach. These methods were chosen based on factors such as popularity, protocol duration, and ionic strength. Additionally, the study investigates the storage stability of DNA–AuNP conjugates in four different buffers: 100 mM Tris-MgCl2, 10 mM PBS-MgCl2, PBS, and deionized water. These buffers were selected to evaluate the effects of ionic strength and their compatibility with LFA materials on conjugate stability and performance. Results indicate that salt-aging methods, particularly with water or PBS, maintained LFA functionality up to 21 days. Adsorbed DNA and all samples stored in PBS-MgCl2 were not functional from the start and aggregated over time. INDEBT and Tris-MgCl2 conjugates demonstrated initial functionality but degraded due to butanol residues and aggregation. A complementary analysis using electrophoretic mobility shift assays (EMSAs), UV-Vis spectroscopy, and dynamic light scattering (DLS) provided essential insights into conjugate behavior. These results emphasize the importance of buffer selection and conjugation techniques for optimizing DNA–AuNP conjugates in LFAs, ensuring their reliability and effectiveness in diagnostic applications., The MICROB-PREDICT project has received funding from the European Union's Horizon 2020 Research & Innovation Program under grant agreement no. 825694. This article reflects only the authors’ view, and the European Commission is not responsible for any use that may be made of the information contained therein. This work was also part funded by the FULLPOC project; AEI Plan Nacional; Grant PID2021-124795NB-I00 funded by MCIN/AEI/ 10.13039/501100011033. at the Catalan Institute of Nanoscience and Nanotechnology (ICN2); The ISGlobal author acknowledges support from the Spanish Ministry of Science and Innovation and State Research Agency through the “Centro de Excelencia Severo Ochoa 2019–2023” Program (CEX2018-000806-S). C.P. acknowledges support from the Spanish Ministry of Science through the Ramón y Cajal grant no. RYC2022-036743-I., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2018-000806-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Prussian-Blue Catalysis and NFC Synergy: a Battery-Free Laser-Induced Graphene-Based Platform for Urine Glucose Monitoring at Point-of-Care

  • Uzunçar, Sinan
  • Maroli, Gabriel
  • Urban, Massimo
  • Merkoçi, Arben
Prussian-blue nanoparticles (PBNPs) show promise in electrochemical hydrogen peroxide (H2O2) sensing but face operational stability challenges without complex strategies. This study introduces a simplified, polymer-based synthesis method, enhancing their stability in a single step. Chemical polymerization of Prussian-blue (PB) and poly(3,4-ethylenedioxythiophene) (PEDOT) with gelatin as a polycationic soft template yields a self-assembled PB-infused Catalytic Hetero-interface Architecture (PB-CHIA) that remarkably improves the stability of PBNPs and offers functional groups for enzyme immobilization, supporting robust biosensing applications. The softened PEDOT rigidity extends PB-CHIA's applicability to various carbonaceous electrode substrates, including glassy carbon and laser-induced graphene (LIG) via simple drop-casting. A fluidic cell module designed with the optimized LIG morphology (nano-fibrous fringes, LIG-F, diameter: 72.87 ± 12.24 nm) modified with PB-CHIA and glucose oxidase enables non-invasive urine glucose monitoring. The configuration accurately quantifies glucose within a linear range of 10-400 µM [R2: 0.991, Sensitivity: 29.88 ± 4.98 µA mM⁻¹ cm⁻2, Detection Limit: 4.52 ± 2.24 µM], covering medical needs. A near-field communication potentiostat is devised for a fully integrated, batteryless, wireless point-of-care (POC) prototype, enabling rapid smartphone readouts in 15 s for daily home-based use. The stable operation of PB-CHIA allows working electrodes' scalable production, highlighting its potential for diverse POC devices in urinary analysis reliant on H2O2 assays., The ICN2 was funded by the CERCA program/Generalitat de Catalunya. The ICN2 has been supported by the Severo Ochoa Centres of Excellence program [SEV-2017-0706] and is currently supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, both funded by MCIN and MCIU/AEI/10.13039.501100011033″. This project was in part supported by the European Union's Horizon 2020 research and innovation program under grant agreement No 101008701 (Project EMERGE) and Grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”. The authors acknowledge the Department de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. S.U. thanks TUBITAK for financial support through the 2219 International Postdoctoral Research Fellowship Program (1059B192100540). G.M. would like to express his gratitude to the Carolina Foundation for financial support through the scholarship “Doctorado 2020.” G.M. acknowledges Universitat Autonoma de Barcelona (UAB) for the possibility of performing this work inside the framework of the Chemistry PhD Program. M.U. has carried out the work within the framework of the doctoral program “Doctorado en Biotecnología” from the Universitat Autònoma de Barcelona. Funding for open access charge: TUBITAK-ULAKBIM, Turkiye, With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene Derivatives as Efficient Transducing Materials for Covalent Immobilization of Biocomponents in Electrochemical Biosensors

  • Jakubec, Petr
  • Panáček, David
  • Nalepa, Martin Alex
  • Rossetti, Marianna
  • Álvarez-Diduk, Ruslan
  • Merkoçi, Arben
  • Vasjari, Majlinda
  • Kulla, Lueda
  • Otyepka, Michal
This review highlights the role of graphene derivatives in advancing electrochemical biosensors for applications in diagnostics, environmental monitoring, and industrial sensing. Graphene derivatives, including graphene oxide (GO), reduced GO, and wide range of graphenes prepared via fluorographene chemistry, represent a prominent class of transducing materials in electrochemical biosensor development. Their ability to support covalent immobilization of biocomponents ensures stability, specificity, and long-term performance, addressing limitations of noncovalent methods. Advances in fabrication, such as laser-assisted reduction, enable scalable and cost-effective production of conductive graphene-based electrodes. Covalent functionalization techniques, like carbodiimide coupling and click chemistry, facilitate integration with bioreceptors, leading to highly selective biosensors. Emerging approaches, including inkjet printing of graphene-based inks onto eco-friendly substrates, promise sustainable and portable diagnostic devices. These advances support biosensors aligned with modern and sustainable technologies. Future efforts must focus on scalable production, improved multiplexing, and environmental sustainability to fully harness the potential of graphene derivatives in electrochemical biosensors., This work was supported by the ERDF/ESF project TECHSCALE (grant no. CZ.02.01.01/00/22_008/0004587) and ERDF/ESF project “Interdisciplinary Approaches to the Prevention and Diagnosis of Viral Diseases” (grant no. CZ.02.01.01/00/23_021/0008856). The authors also acknowledge financial support from the European Union through the REFRESH project—Research Excellence for Region Sustainability and High-tech Industries (grant no. CZ.10.03.01/00/22_003/0000048), funded via the Operational Programme Just Transition. Additional funding was provided by the European Union's Horizon Europe research and innovation programme (project GRADERINK no. 101137959). This work has received also funding from the European Union's Horizon Europe research and innovation program (SUSNANO) under grant agreement no. 101059266 and from the European Union's Horizon Europe – the Framework Programme for Research and Innovation (2021–2027) under grant agreement No 101120706 (2D-BioPAD). The views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. We also acknowledge grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical lateral flow assays: A new frontier for rapid and quantitative biosensing

  • Abarintos, Vernalyn
  • Piper, Andrew
  • Merkoçi, Arben
Electrochemical lateral flow assays (eLFAs) have emerged as a promising alternative to traditional colorimetric LFAs, particularly for applications requiring quantitative readouts and improved sensitivity. Over the past two years, significant advancements have been made in eLFA design, fabrication, and analytical performance, positioning them as promising candidates for decentralized diagnostics and point-of-care (POC) testing. This review highlights recent advances in electrode integration techniques, redox-based signal amplification strategies, and the incorporation of wireless and battery-free electrochemical readout platforms. Multiplexed detection and real-time wireless data transmission have also been demonstrated, further increasing the utility of eLFAs in clinical and field settings. Additionally, innovative strategies to control contact pressure, optimize sample flow, and maintain device stability are being explored to improve reproducibility and usability. Despite these advancements, challenges remain, including biofouling, variability in sample matrices, and the need for standardized protocols across platforms., ICN2 is funded by CERCA programme, Generalitat de Catalunya. Grant SEV-2017-0706 funded by MCIN/AEI/ 10.13039/501100011033. This project was also funded by Grant PID2021-124795NB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. V.A. acknowledges the support and funding by the Department of Science and Technology – Science Education Institute (DOST-SEI) of the Philippines., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible low-resistance laser-reduced graphene oxide for NFC electromyography application

  • Guitti Bonando, Matheus
  • Fernandes, Nathalia Maria Moraes
  • Maroli, Gabriel
  • Steinberg, David
  • Silva Piva, Suelene
  • Andrade, Ricardo Jorge Espanhol
  • Merkoçi, Arben
  • Carvalho Castro e Silva, Cecília de
  • Saito, Lúcia A. M.
This study focuses on developing and characterizing flexible, low-resistance, laser-reduced graphene oxide (rGO) films, demonstrating a near-field communication (NFC) based electromyography (EMG) application. Graphene oxide (GO) was photothermally reduced on a nylon membrane using a 450 nm pulsed laser, resulting in a sheet resistance of 42.0 ± 0.4 Ω/sq, one of the lowest values reported under ambient conditions. The reduction process restored the sp² hybridization of carbon atoms on graphene, significantly enhancing the film’s conductivity to 152.2 ± 8.7 S/cm. The rGO films demonstrated remarkable mechanical and electrical stability, maintaining consistent conductivity after 2,000 bending cycles and under varying radii of curvature from 0.05 to 5.00 mm. Their mechanical stability and performance under deformation highlight their suitability for wearable bioelectronic devices, where flexibility and durability are critical. The films’ integration into an NFC-based EMG system also enabled precise muscle contraction measurements, confirming the material’s potential as a flexible electrode for advanced biomedical applications. The fabrication process is efficient and scalable, leveraging a laser-based reduction method that avoids the need for high-temperature or chemical treatments. These findings highlight laser-reduced rGO films as a promising material for next-generation flexible electronic applications, combining excellent conductivity, robustness, and adaptability to meet the demands of modern wearable technology., The authors from MPU and Mackgraphe were financially supported by the São Paulo Research Foundation (FAPESP) grant No. 2022/08932-9, Coordination for the Improvement of Higher Education Personnel (CAPES) PrInt project No. 88887.310281/2018-00, Mackenzie Research Fund (MackPesquisa) Project No. 231022, MACK – 0012334, National Council for Scientific and Technological Development (CNPq) (grant No. 421686/2023-5, 408248/2023-8, 313091/2022-6, 312958/2023-4, 140083/2021-9, 305109/2022-7), INCT NanoVida (grant No. 406079/2022-6), and Financiadora de Estudos e Projetos (Finep) (Grant No. 0037/21 and 1151/22). All authors also thank the Brazilian Nanotechnology National Laboratory (LNNano), part of the Brazilian Centre for Research in Energy and Materials (CNPEM), a private non-profit organization under the supervision of the Brazilian Ministry for Science, Technology, and Innovations (MCTI), for sample characterization (Proposal No. 20221325, 20230131, 20230136). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. G.M and A.M. acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464 and Grant PID2021-124795NB-I00 funded by MICIU/AEI/https://doi.org/10.13039/501100011033 and by “ERDF/EU”., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

  • Kant, Krishna
  • Beeram, Reshma
  • Cao, Yi
  • dos Santos, Paulo S. S.
  • González-Cabaleiro, Lara
  • García-Lojo, Daniel
  • Guo, Heng
  • Joung, Younju
  • Kothadiya, Siddhant
  • Lafuente, Marta
  • Leong, Yong Xiang
  • Liu, Yiyi
  • Liu, Yuxiong
  • Bharati Moram, Sree Satya
  • Mahasivam, Sanje
  • Maniappan, Sonia
  • Quesada-González, Daniel
  • Raj, Divakar
  • Weerathunge, Pabudi
  • Xia, Xinyue
  • Yu, Qian
  • Abalde-Cela, Sara
  • Alvarez-Puebla, Ramon A.
  • Bardhan, Rizia
  • Bansal, Vipul
  • Choo, Jaebum
  • Coelho, Luis C. C.
  • de Almeida, José M. M. M.
  • Gómez-Graña, Sergio
  • Grzelczak, Marek
  • Herves, Pablo
  • Kumar, Jatish
  • Lohmueller, Theobald
  • Merkoçi, Arben
  • Montaño-Priede, José Luis
  • Ling, Xing Yi
  • Mallada, Reyes
  • Pérez-Juste, Jorge
  • Pina, María P.
  • Singamaneni, Srikanth
  • Soma, Venugopal Rao
  • Sun, Mengtao
  • Tian, Limei
  • Wang, Jianfang
  • Polavarapu, Lakshminarayana
  • Pastoriza Santos, Isabel
Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light–matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Toward Next Generation Lateral Flow Assays, Integration of Nanomaterials

  • Sena-Torralba, Amadeo|||0000-0003-1340-1383
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Parolo, Claudio|||0000-0001-9481-4408
  • Piper, Andrew|||0000-0002-1208-8009
  • Merkoçi, Arben|||0000-0003-2486-8085
Lateral flow assays (LFAs) are currently the most used point-of-care sensors for both diagnostic (e.g., pregnancy test, COVID-19 monitoring) and environmental (e.g., pesticides and bacterial monitoring) applications. Although the core of LFA technology was developed several decades ago, in recent years the integration of novel nanomaterials as signal transducers or receptor immobilization platforms has brought improved analytical capabilities. In this Review, we present how nanomaterial-based LFAs can address the inherent challenges of point-of-care (PoC) diagnostics such as sensitivity enhancement, lowering of detection limits, multiplexing, and quantification of analytes in complex samples. Specifically, we highlight the strategies that can synergistically solve the limitations of current LFAs and that have proven commercial feasibility. Finally, we discuss the barriers toward commercialization and the next generation of LFAs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Toward integrated molecular lateral flow diagnostic tests using advanced micro- and Nnanotechnology

  • Rubio-Monterde, Ana|||0000-0003-0068-9621
  • Quesada-González, Daniel|||0000-0003-3064-2146
  • Merkoçi, Arben|||0000-0003-2486-8085
Introduction: Since the COVID-19 pandemic, some of the routine methods for clinical diagnosis of infectious diseases have become closer to the general population and terms like "PCR" (polymerase chain reaction) and "antigen rapid diagnostic test" (RDT) are not restricted only to the scientific community but now also commonly appear in everyday language. Given the emergency, the pandemic also raised awareness about supply politics and regulation of the market for diagnostic tests [e.g., Emergency Use Authorization (EUA) from the Food and Drug Administration (FDA); or the "Conformité Européenne" marking (CE marking) from the European Union, EU]. PCR and RDT are two major techniques currently used in clinical practice for diagnosis of diseases. On the one hand, PCR is a highly sensitive method, but it relies on expensive equipment and qualified personnel. On the other hand, rapid diagnostic tests, despite being less sensitive, are faster, cheaper, portable, and battery/instrument-free. In this review, we will discuss the advantages and disadvantages of rapid antigen tests and different nucleic acid amplification techniques (NAATs), such as PCR, both as in vitro diagnostic devices. To do so, our review explains the working principle of each method, classifies the different subtypes, and analyzes the impact that the introduction of isothermal amplification methods will have in the diagnostic field. In addition, this review gives an overview of the current available products in the market and the new trends generated as a result of combining the strengths of NAAT and RDT.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

One-Step Laser Nanostructuration of Reduced Graphene Oxide Films Embedding Metal Nanoparticles for Sensing Applications

  • Scroccarello, Annalisa
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Della Pelle, Flavio|||0000-0002-8877-7580
  • De Carvalho Castro Silva, Cecilia|||0000-0003-3933-1838
  • Idili, Andrea|||0000-0002-6004-270X
  • Parolo, Claudio|||0000-0001-9481-4408
  • Compagnone, Dario|||0000-0001-7849-8943
  • Merkoçi, Arben|||0000-0003-2486-8085
The combination of two-dimensional materials and metal nanoparticles (MNPs) allows the fabrication of novel nanocomposites with unique physical/chemical properties exploitable in high-performance smart devices and biosensing strategies. Current methods to obtain graphene-based films decorated with noble MNPs are cumbersome, poorly reproducible, and difficult to scale up. Herein, we propose a straightforward, versatile, surfactant-free, and single-step technique to produce reduced graphene oxide (rGO) conductive films integrating "naked" noble MNPs. This method relies on the instantaneous laser-induced co-reduction of graphene oxide and metal cations, resulting in highly exfoliated rGO nanosheets embedding gold, silver, and platinum NPs. The production procedure has been optimized, and the obtained nanomaterials are fully characterized; the hybrid nanosheets have been easily transferred onto lab-made screen-printed electrodes preserving their nanoarchitecture. The Au@rGO-, Ag@rGO-, and Pt@rGO-based electrodes have been challenged to detect caffeic acid, nitrite, and hydrogen peroxide in model solutions and real samples. The sensors yielded quantitative responses (R 2 ≥ 0.997) with sub-micromolar limits of detections (LODs ≤ 0.6 μM) for all the analytes, allowing accurate quantification in samples (recoveries ≥ 90%; RSD ≤ 14.8%, n = 3). This single-step protocol which requires low cost and minimal equipment will allow the fabrication of free-standing, MNP-embedded rGO films integrable into a variety of scalable smart devices and biosensors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An Artificial Miniaturized Peroxidase for Signal Amplification in Lateral Flow Immunoassays

  • Renzi, Emilia
  • Piper, Andrew|||0000-0002-1208-8009
  • Nastri, Flavia|||0000-0002-3390-9822
  • Merkoçi, Arben|||0000-0003-2486-8085
  • Lombardi, Angela|||0000-0002-2013-3009
Signal amplification strategies are widely used for improving the sensitivity of lateral flow immunoassays (LFiAs). Herein, the artificial miniaturized peroxidase Fe(III)-MimochromeVI*a (FeMC6*a), immobilized on gold nanoparticles (AuNPs), is used as a strategy to obtain catalytic signal amplification in sandwich immunoassays on lateral flow strips. The assay scheme uses AuNPs decorated with the mini-peroxidase FeMC6*a and anti-human-IgG as a detection antibody (dAb), for the detection of human-IgG, as a model analyte. Recognition of the analyte by the capture and detection antibodies is first evidenced by the appearance of a red color in the test line (TL), due to the accumulation of AuNPs. Subsequent addition of 3,3',5,5'-tetramethylbenzidine (TMB) induces an increase of the test line color, due to the TMB being converted into an insoluble colored product, catalyzed by FeMC6*a. This work shows that FeMC6*a acts as an efficient catalyst in paper, increasing the sensitivity of an LFiA up to four times with respect to a conventional LFiA. Furthermore, FeMC6*a achieves lower limits of detection that are found in control experiments where it is replaced with horseradish peroxidase (HRP), its natural counterpart. This study represents a significant proof-of-concept for the development of more sensitive LFiAs, for different analytes, based on properly designed artificial metalloenzymes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The Cleanroom-Free, Cheap, and Rapid Fabrication of Nanoelectrodes with Low zM Limits of Detection

  • Maroli, Gabriel|||0000-0001-8921-4205
  • Abarintos, Vernalyn|||0000-0002-3218-0937
  • Piper, Andrew|||0000-0002-1208-8009
  • Merkoçi, Arben|||0000-0003-2486-8085
Nanoscale electrodes have been a topic of intense research for many decades. Their enhanced sensitivities, born out of an improved signal-to-noise ratio as electrode dimensions decrease, make them ideal for the development of low-concentration analyte sensors. However, to date, nanoelectrode fabrication has typically required expensive equipment and exhaustive, time-consuming fabrication methods that have rendered them unsuitable for widespread use and commercialization. Herein, a method of nanoband electrode fabrication using low cost materials and equipment commonly found in research laboratories around the world is reported. The materials' cost to produce each nanoband is less than €0.01 and fabrication of a batch takes less than 1 h. The devices can be made of flexible plastics and their designs can be quickly and easily iterated. Facile methods of combining these nanobands into powerful devices, such as complete three-electrode systems, are also displayed. As a proof of concept, the electrodes are functionalized for the detection of a DNA sequence specific to SARS-CoV-2 and found to display single molecule sensitivity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nanostructure Tuning of Gold Nanoparticles Films via Click Sintering

  • Urban, Massimo|||0000-0001-6083-833X
  • Rosati, Giulio|||0000-0002-0227-4561
  • Maroli, Gabriel|||0000-0001-8921-4205
  • Della Pelle, Flavio|||0000-0002-8877-7580
  • Bonini, A.|||0000-0001-9511-0699
  • Sajti, Laszlo
  • Fedel, Mariangela
  • Merkoçi, Arben|||0000-0003-2486-8085
Colloidal metal nanoparticles dispersions are commonly used to create functional printed electronic devices and they typically require time-, energy- and equipment-consuming post-treatments to improve their electrical and mechanical properties. Traditional methods, e.g. thermal, UV/IR, and microwave treatments, limit the substrate options and may require expensive equipment, not available in all the laboratories. Moreover, these processes also cause the collapse of the film (nano)pores and interstices, limiting or impeding its nanostructuration. Finding a simple approach to obtain complex nanostructured materials with minimal post-treatments remains a challenge. In this study, a new sintering method for gold nanoparticle inks that called as "click sintering" has been reported. The method uses a catalytic reaction to enhance and tune the nanostructuration of the film while sintering the metallic nanoparticles, without requiring any cumbersome post-treatment. This results in a conductive and electroactive nanoporous thin film, whose properties can be tuned by the conditions of the reaction, i.e., concentration of the reagent and time. Therefore, this study presents a novel and innovative one-step approach to simultaneously sinter gold nanoparticles films and create functional nanostructures, directly and easily, introducing a new concept of real-time treatment with possible applications in the fields of flexible electronics, biosensing, energy, and catalysis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unleashing inkjet-printed nanostructured electrodes and battery-free potentiostat for the DNA-based multiplexed detection of SARS-CoV-2 genes

  • Rossetti, Marianna|||0000-0001-5711-1287
  • Srisomwat, Chawin
  • Urban, Massimo|||0000-0001-6083-833X
  • Rosati, Giulio|||0000-0002-0227-4561
  • Maroli, Gabriel|||0000-0001-8921-4205
  • Yaman Akbay, Hatice Gödze
  • Chailapakul, Orawon
  • Merkoçi, Arben|||0000-0003-2486-8085
Following the global COVID-19 pandemic triggered by SARS-CoV-2, the need for rapid, specific and cost-effective point-of-care diagnostic solutions remains paramount. Even though COVID-19 is no longer a public health emergency, the disease still poses a global threat leading to deaths, and it continues to change with the risk of new variants emerging causing a new surge in cases and deaths. Here, we address the urgent need for rapid, cost-effective and point-of-care diagnostic solutions for SARS-CoV-2. We propose a multiplexed DNA-based sensing platform that utilizes inkjet-printed nanostructured gold electrodes and an inkjet-printed battery-free near-field communication (NFC) potentiostat for the simultaneous quantitative detection of two SARS-CoV-2 genes, the ORF1ab and the N gene. The detection strategy based on the formation of an RNA-DNA sandwich structure leads to a highly specific electrochemical output. The inkjet-printed nanostructured gold electrodes providing a large surface area enable efficient binding and increase the sensitivity. The inkjet-printed battery-free NFC potentiostat enables rapid measurements and real-time data analysis via a smartphone application, making the platform accessible and portable. With the advantages of speed (5 min), simplicity, sensitivity (low pM range, ∼450% signal gain) and cost-effectiveness, the proposed platform is a promising alternative for point-of-care diagnostics and high-throughput analysis that complements the COVID-19 diagnostic toolkit.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reduced graphene oxide electrodes meet lateral flow assays, A promising path to advanced point-of-care diagnostics

  • Calucho, Enric|||0000-0002-6024-765X
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Piper, Andrew|||0000-0002-1208-8009
  • Rossetti, Marianna|||0000-0001-5711-1287
  • Nevanen, Tarja K.
  • Merkoçi, Arben|||0000-0003-2486-8085
Research in electrochemical detection in lateral flow assays (LFAs) has gained significant momentum in recent years. The primary impetus for this surge in interest is the pursuit of achieving lower limits of detection, especially given that LFAs are the most widely employed point-of-care biosensors. Conventionally, the strategy for merging electrochemistry and LFAs has centered on the superposition of screen-printed electrodes onto nitrocellulose substrates during LFA fabrication. Nevertheless, this approach poses substantial limitations regarding scalability. In response, we have developed a novel method for the complete integration of reduced graphene oxide (rGO) electrodes into LFA strips. We employed a CO laser to concurrently reduce graphene oxide and pattern nitrocellulose, exposing its backing to create connection sites impervious to sample leakage. Subsequently, rGO and nitrocellulose were juxtaposed and introduced into a roll-to-roll system using a wax printer. The exerted pressure facilitated the transfer of rGO onto the nitrocellulose. We systematically evaluated several electrochemical strategies to harness the synergy between rGO and LFAs. While certain challenges persist, our rGO transfer technology presents compelling potential for setting a new standard in electrochemical LFA fabrication.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Direct writing of graphene electrodes for point-of-care electrochemical sensing applications

  • Zhao, Lei|||0000-0003-0291-2655
  • Piper, Andrew|||0000-0002-1208-8009
  • Rosati, Giulio|||0000-0002-0227-4561
  • Merkoçi, Arben|||0000-0003-2486-8085
Electrochemical sensors are increasingly garnering attention as valuable tools for point-of-care (POC) testing due to their low costs, high sensitivities, and ease of miniaturization. Graphene-based materials, renowned for their tunable electrical conductivity, high specific surface areas, versatile functionality, and biocompatibility; are highly suited for the fabrication of electrochemical sensors with heightened sensitivities. Non-contact, maskless, direct writing methods allow the rapid, large-scale production of graphene electrodes with high design flexibility. Researchers globally are advancing graphene electrode production, aiming for smaller, faster, and more efficient sensors. This review provides a comprehensive overview of recent advances on the direct writing of graphene electrodes for electrochemical sensing applications. It covers the basics of direct writing techniques, the advancements in graphene ink/precursor preparation, structural design, and device integration, with a focus on POC platforms.