Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene Derivatives as Efficient Transducing Materials for Covalent Immobilization of Biocomponents in Electrochemical Biosensors

  • Jakubec, Petr
  • Panáček, David
  • Nalepa, Martin Alex
  • Rossetti, Marianna
  • Álvarez-Diduk, Ruslan
  • Merkoçi, Arben
  • Vasjari, Majlinda
  • Kulla, Lueda
  • Otyepka, Michal
This review highlights the role of graphene derivatives in advancing electrochemical biosensors for applications in diagnostics, environmental monitoring, and industrial sensing. Graphene derivatives, including graphene oxide (GO), reduced GO, and wide range of graphenes prepared via fluorographene chemistry, represent a prominent class of transducing materials in electrochemical biosensor development. Their ability to support covalent immobilization of biocomponents ensures stability, specificity, and long-term performance, addressing limitations of noncovalent methods. Advances in fabrication, such as laser-assisted reduction, enable scalable and cost-effective production of conductive graphene-based electrodes. Covalent functionalization techniques, like carbodiimide coupling and click chemistry, facilitate integration with bioreceptors, leading to highly selective biosensors. Emerging approaches, including inkjet printing of graphene-based inks onto eco-friendly substrates, promise sustainable and portable diagnostic devices. These advances support biosensors aligned with modern and sustainable technologies. Future efforts must focus on scalable production, improved multiplexing, and environmental sustainability to fully harness the potential of graphene derivatives in electrochemical biosensors., This work was supported by the ERDF/ESF project TECHSCALE (grant no. CZ.02.01.01/00/22_008/0004587) and ERDF/ESF project “Interdisciplinary Approaches to the Prevention and Diagnosis of Viral Diseases” (grant no. CZ.02.01.01/00/23_021/0008856). The authors also acknowledge financial support from the European Union through the REFRESH project—Research Excellence for Region Sustainability and High-tech Industries (grant no. CZ.10.03.01/00/22_003/0000048), funded via the Operational Programme Just Transition. Additional funding was provided by the European Union's Horizon Europe research and innovation programme (project GRADERINK no. 101137959). This work has received also funding from the European Union's Horizon Europe research and innovation program (SUSNANO) under grant agreement no. 101059266 and from the European Union's Horizon Europe – the Framework Programme for Research and Innovation (2021–2027) under grant agreement No 101120706 (2D-BioPAD). The views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. We acknowledge Departament de Recerca i Universitats of Generalitat de Catalunya for the grant 2021 SGR 01464. We also acknowledge grant PID2021-124795NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Filter, Flip, and Fabricate: A Wax-Assisted Stamp-Transfer Approach for Flexible Ti3C2Tx MXene Electrochemical Transducers

  • Babar, Zaheer Ud Din
  • Bruno, Andy
  • Maroli, Gabriel
  • Afsheen Zahra, Syedah
  • Della Ventura, Bartolomeo
  • Velotta, Raffaele
  • Iannotti, Vincenzo
  • Álvarez-Diduk, Ruslan
  • Merkoçi, Arben
Combining additive-free solution processing of MXenes with template-assisted transfer represents an innovative approach for the fabrication of electrochemical sensors. Herein, we introduce a wax-assisted templating and stamp-transfer (WAST) approach to fabricate monolithic MXene transducers. To this end, two configurations were developed: (A) MXene-at-all electrodes, where the working, counter, and reference electrodes were entirely composed of MXene, and (B) MXene working electrodes combined with an Ag/AgCl pseudoreference and carbon counter electrodes. Additive-free MXene inks, at different concentrations and volumes, were filtered onto wax-templated PVDF membranes to form stampable patterns. Voltammetric characterization revealed consistent anodic and cathodic peak currents (Ipa and Ipc) and steady peak-to-peak separation (ΔEp) across three independent batches, indicating excellent reproducibility with Ipa = 87.9 ± 1.7 μA, Ipc = -81.3 ± 1.5 μA, and ΔEp = 255.9 ± 4.6 mV for configuration A, and Ipa = 43.8 ± 0.6 μA, Ipc = -62.8 ± 1.2 μA, with a 3-fold lower peak separation (ΔEp = 87.6 ± 0.9 mV) in the case of configuration B (mean ± SE, n = 15). Primary benchmarking with similar commercial systems signifies the efficacy of WAST-produced transducers to mimic commercial electrode performance and provides a robust alternative to conventional deposition methods. In addition, a proof-of-concept experiment for Hg2+ ion sensing validated its potential for practical applications. The WAST method offers a robust fabrication, configuration choice, and tool-light patterning that can accelerate lab-scale prototyping of stand-alone flexible electrochemical devices., Z.U.D.B. acknowledges Scuola Superiore Meridional (SSM), University of Naples Federico-II, Naples, Italy, for funding his stay as a visiting PhD scholar at the Catalan Institute of Nanoscience and Nanotechnology (ICN2), Campus UAB, 08193 Bellaterra, Barcelona, Spain. The authors would also like to acknowledge Massimo Urban, currently a postdoctoral researcher in the Nanobioelectronics and Biosensors group at ICN2 for his assistance and discussions during this work. This work has received funding from the European Union’s Horizon Europe research and innovation program (SUSNANO) under grant agreement no. 101059266. A.B. acknowledges Universitat Autònoma de Barcelona (UAB) for the possibility of performing this work within the framework of Biotechnology PhD Programme. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Printing technologies for monitoring crop health

  • Panáček, David
  • Kupka, Vojtěch
  • Nalepa, Martin Alex
  • Dědek, Ivan
  • Álvarez-Diduk, Ruslan
  • Olenik, Selin
  • Flauzino, José M. R.
  • Zdražil, Jan
  • Jakubec, Petr
  • Zdražil, Lukáš
  • Spíchal, Lukáš
  • Sonigara, Keval K.
  • Zboril, Radek
  • Pumera, Martin
  • Merkoçi, Arben
  • Wang, Joseph
  • De Diego, Nuria
  • Güder, Firat
  • Otyepka, Michal
Agricultural production requires low-cost sensors capable of delivering reliable, high-resolution data across large areas. Rising food demand, limited arable land, and severe soil degradation have accelerated the adoption of precision agriculture, which relies on real-time monitoring of soil, plant, and environmental conditions. Central to this shift is the development of scalable sensor technologies enabled by advances in materials science. Printing techniques, including inkjet, screen, aerosol jet, 3D printing, and direct laser writing, offer versatile routes to fabricate flexible, large-area, and plant-integrated sensors. This Review surveys recent progress in printable low-dimensional materials for agricultural sensing, examines their physicochemical properties in relation to sensor performance, and discusses key challenges and future opportunities requiring interdisciplinary integration., The work was supported from the ERDF/ESF project TECHSCALE (no. CZ.02.01.01/00/22_008/0004587) and the ERDF/ESF project “Interdisciplinary Approaches to the Prevention and Diagnosis of Viral Diseases” (CZ.02.01.01/00/23_021/0008856). M.O. and R.Z. also acknowledge financial support of the European Union under the REFRESH-Research Excellence For Region Sustainability and High-tech Industries project number CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition. This work was supported by the project Interdisciplinary approaches for the development and application of new materials in industrial, agricultural and medical practice, reg. no. CZ.02.01.01/00/23_021/0008909 of the ERDF Programme Johannes Amos Comenius. This work has received funding from the European Union’s Horizon Europe research and innovation program (SUSNANO) under grant agreement no. 101059266. The views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIU/AEI/10.13039.501100011033. F.G. and J.F. thank the Bill and Melinda Gates Foundation (Grand Challenges Explorations scheme under grant numbers OPP1212574 and INV-038695) for supporting this work. F.G. and S.O. acknowledge the support of the Bezos Earth Fund through the Bezos Centre for Sustainable Protein (BCSP/IC/001)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed