Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Chiral plasmonic superlattices from template-assisted assembly of achiral nanoparticles

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Mendoza-Carreño, Jose|||0000-0001-8650-9913
  • Garriga, Miquel|||0000-0002-6683-0790
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Mihi, Agustín|||0000-0003-3821-7881
The creation of chiral plasmonic architectures combining templates with achiral plasmonic particles leads to strong chiroptical responses that can be finely tuned via the characteristics of the colloidal building blocks. Here we show how elastomeric molds, pre-patterned with a hexagonal array of triskelia motifs, can guide the assembly of ordinary noble metal colloids into chiral plasmonic architectures with strong dichroism values. Under normal incidence, the chiral arrays made with gold and silver colloids showed g-factors of 0.18 and 0.4, respectively. In all cases, increasing the size of the colloid allows tuning the optical properties of the structure in the VIS-NIR range. When a superstrate layer is deposited onto the structures, the extrinsic chirality response of the 2D superlattice is revealed and strongly amplified by the chiral motifs under oblique inspection, leading to g-factors of ± 1.2 at ± 14°. Finally, these chiral plasmonic resonances sustained by the triskelion array are used to produce circularly polarized photoluminescence from achiral organic dyes placed on top with up to 20% of dissymmetry.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

From halide perovskite nanocrystals to supercrystals: fundamentals and applications

  • Aneesha, S. L.
  • Xia, Yifei
  • Okamoto, Takuya
  • Gaur , Deepika
  • Seth, Sudipta
  • Hofkens, Johan
  • Polavarapu , Lakshminarayana
  • Biju, Vasudevanpillai
Halide perovskite supercrystals, also known as superlattices, are electronically coupled low-dimensional materials, such as nanocrystals, quantum dots, or nanoplatelets that offer collective optical and electronic properties distinct from those of their constituents. The intrinsic dielectric properties and defect tolerance of halide perovskites make their supercrystals superior to metal chalcogenide supercrystals. The physicochemical properties of ligands and the shape and size uniformity of the constituents determine the overall size, shape, and electronic and optical properties of these supercrystals, where excitons interact across long distances through phase coherence and dipole coupling, inducing enhanced and narrow-band emission, including superfluorescence, superradiance, amplified spontaneous emission, and lasing. These emergent optical and electronic properties make halide perovskite supercrystals promising for brilliant LEDs, low-threshold lasers, high-efficiency solar cells, and broadband photodetectors. This article provides a state-of-the-art overview of halide perovskite supercrystals, addressing the critical gap between their structure–property relationship and linking the fundamental mechanism of electronic coupling with their emergent optoelectronic properties., Agencia Estatal de Investigación | Ref. TED2021-131628A-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Halide perovskite photocatalysts for clean fuel production and organic synthesis: opportunities and challenges

  • Singh, Siddharth
  • Hamid, Zeinab
  • Ramavath , Babu
  • Gómez Graña, Sergio
  • Hu, Xiaowen
  • McCulloch, Iain
  • Hoye, Robert L. Z.
  • Govind Rao, Vishal
  • Polavarapu , Lakshminarayana
The need to constrain the use of fossil fuels causing global warming is motivating the development of a variety of photocatalysts for solar‐to‐fuel generation and chemical synthesis. In particular, semiconductor‐based photocatalysts have been extensively exploited in solar‐driven organic synthesis, carbon dioxide (CO 2 ) conversion into value‐added products, and hydrogen (H 2 ) generation from water (H 2 O) splitting. Recently, metal halide perovskites (MHPs) have emerged as an important class of semiconductors for heterogeneous photocatalysis owing to their interesting properties. Despite key issues with long‐term stability and degradation in polar solvents due to their ionic character, there has been significant progress in halide perovskite‐based photocatalysts with improving their stability and performance in the gas and liquid phases. This review discusses the state‐of‐the‐art for using halide perovskite‐based photocatalysts and photoelectrocatalysis in hydrogen production from water and halogen acid solutions, CO 2 reduction into value‐added chemicals, and various organic chemical transformations. The different types of halide perovskites used, design strategies to overcome the instability issues in polar solvents, and the efficiencies achieved are discussed. Furthermore, the outstanding challenges associated with the use of polar electrolytes and how the stability and performance can be improved are discussed., Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Xunta de Galicia | Ref. ED431F2021/05, UK Research and Innovation | Ref. EP/X029900/1, Royal Academy of Engineering | Ref. RCSRF2324‐18‐68, Engineering and Physical Sciences Research Council | Ref. EP/T026219/1, Engineering and Physical Sciences Research Council | Ref. EP/W017091/1, Engineering and Physical Sciences Research Council | Ref. EP/X038777/1
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Primitive ligands drive 1D CsPb3 nanostructures with strongly polarized photoluminescence

  • Xie, Juan
  • Feng, Kang
  • Yin, Chuo
  • Zhang, Jie
  • Mourdikoudis , Stefanos
  • Du, Yanli
  • Chen, Xu
  • Liu, Yang
  • Li, Hanjun
  • Fan, Shengshi
  • Zeng, Longhui
  • Polavarapu , Lakshminarayana
  • Zheng, Guangchao
Despite growing research efforts on inorganic lead halide perovskite nanocrystals, the mechanistic understanding of nucleation and growth kinetics remains insufficient for achieving precise morphology and crystal structure control. Herein, by simply modulating the concentrations of primitive ligands (e.g., I− and oleylamine) into conventional synthetic strategies, CsPbI3 perovskites, ranging from zero-dimensional quantum dots to unique one-dimensional nanowires/nanorods and ginkgo leaf-like architectures, can be realized. Mechanistic studies suggests that capping agents compete for adsorption on specific crystal facets, a finding further confirmed by density functional theory (DFT) calculations. Simultaneously, the crystal structures of the products undergo a phase transition from cubic to orthorhombic symmetry driven by lattice distortion that disrupts the crystal symmetry. In addition, temperature-dependent photoluminescence studies revealed that the electron-phonon coupling strengths of longitudinal optical (LO) phonons (γLO = 73.14 meV and mathematical equation = 28.74 meV) of CsPbI3 nanorods were much lower (γLO = 103.25 meV and ELO = 33.62 meV) than those of ginkgo leaf-like CsPbI3 superstructures, limiting multi-phonon-assisted non-radiative pathways. As a result, CsPbI3 nanorods display a strong polarization dependence with a polarization degree of up to ∼0.49. These results not only demonstrates novel perovskite nanocrystals but also provide a versatile platform for tailoring perovskite NCs with combined morphological diversity and tunable optical properties., National Key Research and Development Program of China | Ref. 2024YFE0105200, National Natural Science Foundation of China | Ref. 22271257, National Natural Science Foundation of China | Ref. 21902148, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

The combination of chiral assembly and chiral template effects boosts circularly polarized luminescence of perovskite nanocrystals

  • Pawlak, Mateusz
  • Abramowicz, Julia
  • Fiuza Maneiro, Nadesh
  • Vinnacombe‐Willson, Gail A.
  • Jo, Sunghwan
  • Benchimol, Elie
  • Roszkowski, Piotr
  • Chen, Zitao
  • Wang, Da
  • Clever, Guido H.
  • Liz‐Marzán, Luis M.
  • Mihi, Agustín
  • Polavarapu , Lakshminarayana
  • Lewandowski, Wiktor
Perovskite nanocrystals (PNCs) exhibiting circularly polarized luminescence (CPL) represent a promising class of materials for display and light communication technologies, owing to their emission covering the entire visible range with near‐unity photoluminescence efficiency. However, these materials suffer from low selectivity in the handedness of the emitted light, with most studies focusing on green emission. We address these issues by exploiting and broadening the scope of interactions between achiral PNCs and chiral organic templates. For this purpose, we select three types of PNCs with red, green, and blue emissions and introduce them into a chiral liquid‐crystalline matrix in the form of composite thin films. Electron microscopy confirmed the assembly of PNCs within nanoscale gaps formed by supramolecular, liquid crystalline structures. The obtained composites displayed a CPL dissymmetry factor g lum up to ≈ 0.24. The highly dissymmetric CPL properties were found to result from an interplay between two effects: chiral assembly of PNCs within a chiral environment (intrinsic) and the selective filtering by the chiral matrix. This system enables control over the dominant factors by adjusting the CPL spectral region and type of particle assembly, providing thin film materials with highly dissymmetric and spectrally tunable CPL responses., Narodowe Centrum Nauki (Polonia) | Ref. UMO‐2020/39/O/ST5/03445, Uniwersytet Warszawski (Polonia) | Ref. WNE II.2.1/02/2023, Agencia Estatal de Investigación | Ref. CEX2023‐001263‐S, Deutsche Forschungsgemeinschaft | Ref. 390677874, Deutsche Forschungsgemeinschaft | Ref. 331085229, National Natural Science Foundation of China | Ref. 12374211
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Chiral molecules in action: chemistry of chiral perovskite and perovskite-inspired materials

  • Ramavath , Babu
  • Heger, Julian E.
  • Dutta, Taniya
  • Hu, Xiaowen
  • Pradhan, Narayan
  • Müller-Buschbaum, Peter
  • Gómez Graña, Sergio
  • Polavarapu , Lakshminarayana
The emergence of chiral metal halides marks a pivotal advancement in materials science, where structural asymmetry enables unprecedented control over spin-selective transport and polarized light interactions for optoelectronic and spintronic technologies. The introduction of chiral ligands into the metal halide lattice or on the surface of NCs imparts chirality to the corresponding hybrid materials, which adapts the handedness (R or S) of the chiral molecule. The choice of chiral molecule and metal halide type critically influences the crystal structure and dimensionality of metal halide crystals and thus their properties. Despite significant progress, the relationship between structure and chiroptical efficiency remains unclear. Nonetheless, they show great promise for spin filtering, enabling the fabrication of chiral LEDs and photodetectors. Considering these advancements, this Perspective focuses on the chiral-ligand-assisted design, synthesis, and functional exploration of chiral metal halide bulk and nanocrystals, along with the outstanding challenges that need to be addressed in the future., Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Deutsche Forschungsgemeinschaft | Ref. EXC 2089/1 390776260, Xunta de Galicia | Ref. ED431F2021/05, Alexander von Humboldt-Stiftung, Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. RYC2018-026103-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Strategies to maximize the dopant‐to‐exciton emission ratio in Mn‐Doped CsPbCl3 nanocrystals

  • Fiuza Maneiro, Nadesh
  • López Fernández, Iago
  • Ye, Junzhi
  • Zhang, Yunwei
  • Otero Martinez, Clara
  • Dai, Linjie
  • Ceballos, Manuel
  • Samanta , Subarna
  • Pino, Pablo del
  • Rao, Akshay
  • Gómez Graña, Sergio
  • Hoye, Robert L. Z.
  • Polavarapu , Lakshminarayana
Doping CsPbCl3 perovskite nanocrystals (NCs) with Mn 2+ has gained attention due to their interesting emission properties. However, the photoluminescence (PL) spectra of these NCs display both dopant and exciton emission peaks. It is critical to achieve color purity for light–emitting diode (LED) applications, but the factors that govern this remain unclear. Herein, a systematic investigation of the factors determining the exciton‐to‐dopant energy transfer process in Mn2⁺‐doped CsPbCl3 NCs is presented to reveal how the exciton‐to‐Mn2⁺ emission ratio can be maximized. These findings indicate that this process is not only affected by dopant concentration and halide (Cl/Br) composition, but also by the co‐dopants used, as well as surface passivation. These factors can potentially account for the discrepancies in the exciton‐to‐dopant emission ratios across the literature. These results show that post‐synthetic surface passivation of Mn2⁺‐doped CsPbCl3 NCs with quaternary ammonium salt, such as dimethyldidodecylammonium chloride (DDACl), drastically enhances the exciton‐to‐Mn2⁺ emission ratio, achieving a two‐fold increase. Ultrafast pump‐probe spectroscopy surprisingly reveals that the passivation can introduce shallow trap states that enhance energy transfer to dopant sites and influence overall luminescence efficiency through non‐radiative decay processes. This study sets guidelines for maximizing dopant emission in doped perovskite NCs., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Photoluminescence of te‐doped double perovskite Cs2ZrCl6 nanocrystals versus bulk: insights from temperature‐dependent spectroscopy

  • Liu , Yang
  • Wu, Ye
  • Sokolova, Anastasiia
  • Shi, Xinmin
  • Kershaw, Stephen V.
  • Wu, Yusheng
  • Polavarapu , Lakshminarayana
  • Li, Xiaoming
  • Rogach, Andrey L.
Although bulk crystals of lead‐free vacancy‐ordered double perovskites demonstrated a highly efficient emission, their nanocrystals (NCs) counterparts exhibit inferior optical performance. To understand the reasons behind this phenomenon, Cs 2 ZrCl 6 :Te 4+ double perovskite NCs are synthesized, and their optical properties are compared with their bulk powders. Temperature‐dependent spectroscopy revealed that the NCs sustain a thermal sensitization of the intermediate trap state, which is located between the self‐trapped state of the host (Cs 2 ZrCl 6 ) and the triplet states of the dopant (Te 4+ ). This opens up a pathway for the non‐radiative recombination, and thus decreases the energy transfer efficiency from host to dopant. Importantly, this pathway is suppressed in larger (40 nm) Cs 2 ZrCl 6 :Te 4+ NCs, resulting in their photoluminescence quantum yield of 24%, as compared to 7% for the 22 nm NCs. Furthermore, the emission spectral range of these double perovskite NCs is shown to extended into near‐infrared by incorporating rare‐earth ions as additional dopants. The study has established a crucial relation between the optical properties and the size effect in lead‐free vacancy‐ordered double perovskites and thus lays a foundation for further improvement of their optical performance., Xunta de Galicia | Ref. ED431F2021/05, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Natural Science Foundation of Jiangsu Province | Ref. BK20220142
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Single-step synthesis of Cs3Bi2I9 nanocrystals for scalable direct X-ray detectors

  • Ramavath , Babu
  • Ghosh, Joydip
  • Schrenker, Nadine J.
  • Dudipala, Kavya Reddy
  • Huang, Yi-Teng
  • Wang, Yixin
  • Dong, Shiling
  • Gaur , Deepika
  • Bals, Sara
  • Gómez Graña, Sergio
  • Chua, Xian Wei
  • Braddock, Isabel H. B.
  • Veale, Matthew. C.
  • Wilson, Matthew. D.
  • Woolley, Jack Matthew
  • Rao, Akshay
  • Hoye, Robert L. Z.
  • Polavarapu , Lakshminarayana
Lead-free perovskite-inspired materials have emerged as promising candidates for direct X-ray detection. However, in the early exploration of emerging materials, the focus was on large single crystals. Herein, we report a facile, scalable, single-step synthesis of high-quality Cs3Bi2I9 nanocrystals (NCs) directly from their precursor powders through an ultrasonication approach. The large-scale synthesis of the NCs allowed for the production of 0.78 cm2 pellets used in the fabrication of X-ray detection devices, which exhibit a high bulk resistivity of 1 × 1011 Ω cm and a low dark current density of 3.3 nA cm–2 under an applied bias of 50 V (357 V cm–1 electric field). These devices achieve a limit detection of 108 nGyair s–1, an order of magnitude improvement over the a-Se used in commercial medical imaging, along with stable current under continuous X-ray exposure with a peak energy of 35 keVp. Finally, we demonstrate the scale-up of these detectors by producing thick films 9 cm2 in area, achieving a performance comparable to that of the detectors based on pellets., Engineering and Physical Sciences Research Council | Ref. EP/Y032942/1, Royal Academy of Engineering | Ref. RCSRF/2324-18-68, Fonds Wetenschappelijk Onderzoek | Ref. 12AAO25N, Xunta de Galicia | Ref. ED431F 2021/05, Division of Electrical, Communications and Cyber Systems | Ref. ECCS-2313755, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. RYC2018-026103-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Chiral molecules induce enantiomorphic lattice helicity in chiral 0D tin bromide crystals

  • Ramavath , Babu
  • Xu, Haoyuan
  • Covelo Rodríguez, Berta
  • Pérez Juste, Ignacio
  • Heger, Julian E.
  • Solhtalab, Nasrin
  • Li, Zelin
  • Zhong, Longfeng
  • Hu, Xiaowen
  • Deschler, Felix
  • Müller‐Buschbaum, Peter
  • Jiang, Xiao‐Fang
  • Gómez Graña, Sergio
  • Polavarapu , Lakshminarayana
Chiral organic–inorganic hybrid metal halides have emerged as a promising class of materials for spin‐controlled optical and optoelectronic effects and related applications. Chiral hybrid metal halides generally crystallize in non‐helical space groups. Herein, we report the discovery of zero‐dimensional (0D) chiral (R/S‐MBA) 2 SnBr 6 (MBA: methylbenzylammonium cation) single crystals with enantiomorphic lattice helicity. The S‐enantiomer of the chiral molecule induces right‐handed helicity with the P6 1 space group (right‐handed, P‐helix), while the R‐enantiomer induces right‐handed helicity with the P6 5 space group (left‐handed, M‐helix). The chiral molecules induce the helical twist of inorganic units in the lattice through N─H···Br and C─H···π interactions. Density functional theory (DFT) calculations indicate that the strong electronic coupling between chiral molecules and SnBr 6 2− subunits is responsible for the generation of chirality. The chiral crystals exhibit circular dicroism (CD) spectra with a high dissymmetry factor ( g CD ) of 3.5 × 10 − 2 and no Cotton effect, maintaining the same CD sign throughout the spectrum. In addition, they exhibit broadband second harmonic generation (SHG) over a broad excitation range, with a g CP‐SHG up to 0.44. Furthermore, we find that the alloying of Sn with Pb leads to a change in dimensionality from 0D to non‐helical 1D structures. These crystals with helical lattices and interesting CD responses are expected to open new avenues for spin‐controlled applications., Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Agencia Estatal de Investigación | Ref. PID2022-138023NB-I00, Deutsche Forschungsgemeinschaft | Ref. EXC 2089/1 – 390776260, Deutsche Forschungsgemeinschaft | Ref. FKZ 05D23WO1, Agencia Estatal de Investigación | Ref. RYC2018-026103-I, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Tailoring chiral gold nanorods via single‐step seed‐to‐Au(III) ratio and unlocking their potential in refractive index sensing

  • Fernandez Lodeiro, Carlos
  • Gómez Graña, Sergio
  • Cordero Ferradás, María José
  • Martín, Victor F.
  • Albrecht, Wiebke
  • Hervés Beloso, Juan Pablo
  • Polavarapu , Lakshminarayana
  • Taboada, José M.
  • Obelleiro Basteiro, Fernando
  • Bals, Sara
  • Pérez Juste, Jorge
  • Pastoriza Santos, Isabel
Colloidal chiral plasmonic nanoparticles are garnering growing interest due to their interaction with circularly polarized light, offering advanced optical applications. Their circular dichroism (CD) spectra are significantly narrower and more defined than extinction spectra, making them ideal for refractive index‐based sensing. Despite progress in colloidal synthesis, this field remains relatively underexplored. In this work, a one‐step, seed‐mediated route to chiral Au nanorods is introduced in which the molar ratio Au 3 ⁺/Au⁰ enables continuous control of the CD response (intensity, sign, and position), using L‐ and D‐cysteine as chiral inducers. CD‐based refractive index sensitivity (RIS) measurements reveal a figure of merit (FoM = RIS/linewidth) exceeding 1000 RIU −1 , outperforming the conventional extinction‐based approaches. Thin films of C‐AuNRs fabricated via a layer‐by‐layer assembly retain the bisignate CD response and show RIS values comparable to colloidal samples. These films demonstrate excellent stability, reusability, and resilience in highly absorbing media. All the experimental data are supported by advanced calculations performed using full‐wave M3 Maxwell's solver and using electron tomography reconstructions as direct input. Finally, their applicability in RI‐based quantitative detection of bovine serum albumin (BSA) is demonstrated, highlighting their potential for biomolecular sensing., Agencia Estatal de Investigación | Ref. TED2021-131628A-I00, Agencia Estatal de Investigación | Ref. CNS2022-135531, Agencia Estatal de Investigación | Ref. PID2022-138724NB-I00, Agencia Estatal de Investigación | Ref. PID2023-147567NB-I00, Xunta de Galicia | Ref. GPC ED431B 2025/42, Xunta de Galicia | Ref. GRCED431C2020/09, Universidade de Vigo/CISUG
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inducing Efficient and Multiwavelength Circularly Polarized Emission From Perovskite Nanocrystals Using Chiral Metasurfaces

  • Fiuza-Maneiro, Nadesh
  • Mendoza Carreño, José
  • Gómez Graña, Sergio
  • Alonso Carmona, M. Isabel
  • Polavarapu, Lakshminarayana
  • Mihi, Agustín
Chiral nano-emitters have recently received great research attention due to their technological applications and the need for a fundamental scientific understanding of the structure-property nexus of these nanoscale materials. Lead halide perovskite nanocrystals (LHP NCs) with many interesting optical properties have anticipated great promise for generating chiral emission. However, inducing high anisotropy chiral emission from achiral perovskite NCs remains challenging. Although chiral ligands have been used to induce chirality, their anisotropy factors (glum) are low [10-3 to 10-2]. Herein, the generation of high anisotropy circularly polarized photoluminescence (CPL) from LHP NCs is demonstrated using chiral metasurfaces by depositing nanocrystals on top of prefabricated resonant photonic structures (2D gammadion arrays). This scalable approach results in CPL with glum to a record high of 0.56 for perovskite NCs. Furthermore, the differences between high-index dielectric chiral metasurfaces and metallic ones are explored for inducing chiral emission. More importantly, the generation of simultaneous multi-wavelength circularly polarized light is demonstrated by combining dielectric and metallic chiral metasurfaces., N.F.M. and J.M.C. contributed equally to this work. This work had received funding from the Spanish Agencia Estatal de Investigación (AEI/MCIN) through grants, PID2022-141956NB-I00 MCIN/AEI/10.13039/501100011033 (OUTLIGHT), and CEX2023-001263-S (Spanish Severo Ochoa Centre of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). J.M.C. acknowledges an FPI fellowship (PRE2020-09411) from MICINN co-financed by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona UAB. L.P. acknowledges support from the Spanish Ministerio de Ciencia e Innovación through Ramón y Cajal grant (grant no. RYC2018-026103-I), the Spanish State Research Agency (grant nos. PID2020-117371RA-I00 and TED2021-131628A-I00), funded by MICIU/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR, and a grant from the Xunta de Galicia (grant no. ED431F2021/05). S.G.G. acknowledge support by the project CNS2022-135531 (funded by MICIU/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR). This research was also supported by the EIC PATHFINDER CHALLENGES project 101162112 (RADIANT), funded by the European Union. Funding for open access by the Universidade de Vigo/CISUG., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A single nanophotonic platform for producing circularly polarized white light from non-chiral emitters

  • Mendoza Carreño, José
  • Bertucci, Simone
  • Garbarino, Mauro
  • Cirignano, Matilde
  • Fiorito, Sergio
  • Lova, Paola
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Stasio, Francesco di
  • Mihi, Agustín
Direct manipulation of light spin-angular momentum is desired in optoelectronic applications such as, displays, telecommunications, or imaging. Generating polarized light from luminophores avoids using optical components that cause brightness losses and hamper on-chip integration of light sources. Endowing chirality to achiral emitters for direct generation of polarized light benefits from existing materials and can be achieved by chiral nanophotonics. However, most chiral nanostructures operate in narrow wavelength ranges and involve nanofabrication processes incompatible with high-throughput production. Here, a single nanophotonic architecture is designed to sustain chiroptical resonances along the visible spectrum. This platform, fabricated with scalable soft-nanoimprint lithography transfers its chirality to conventional emitters (CdSe/CdS nanoplatelets, CdSe/CdS quantum dots, CsPbBr3, CsPbI3 perovskite nanocrystals and F8BT) placed atop, achieving a high dissymmetry emission factor (glum > 1). The dynamics study suggests enhanced out-coupling efficiency for one helicity by the photonic structure. Finally, a white light-emitting blend containing different emitters shows simultaneous dissymmetric emission values along the visible spectrum with this chiral nanophotonic platform., This work has received funding from the Spanish Agencia Estatal de Investigación (AEI/MCIN) through grants, PID2022-141956NB-I00 MCIN/AEI/10.13039/501100011033(OUTLIGHT), and CEX2023-001263-S (Spanish Severo Ochoa Centre of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). This research was also supported by the EIC PATHFINDER CHALLENGES project 101162112 (RADIANT), funded by the European Union. J.M.C. acknowledges an FPI fellowship (PRE2020-09411) from MICINN co-financed by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona UAB. S.B., M.C., S.F., and F.D.S. acknowledge support by the European Research Council via the ERC-StG “NANOLED” (Grant 851794). M.G. and F.D.S. acknowledge support by the European Innovation Council via the Pathfinder OPEN “TWISTEDNANO” (Grant 101046424). S.B. also acknowledges Dorwal Marchelli for his insight on spectroscopy measurements and Simone Lauciello for the HR-SEM images., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chiral plasmonic superlattices from template-assisted assembly of achiral nanoparticles

  • Qi, Xiaoyu
  • Pérez, Luis Alberto
  • Mendoza Carreño, José
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Mihi, Agustín
The creation of chiral plasmonic architectures combining templates with achiral plasmonic particles leads to strong chiroptical responses that can be finely tuned via the characteristics of the colloidal building blocks. Here we show how elastomeric molds, pre-patterned with a hexagonal array of triskelia motifs, can guide the assembly of ordinary noble metal colloids into chiral plasmonic architectures with strong dichroism values. Under normal incidence, the chiral arrays made with gold and silver colloids showed g-factors of 0.18 and 0.4, respectively. In all cases, increasing the size of the colloid allows tuning the optical properties of the structure in the VIS-NIR range. When a superstrate layer is deposited onto the structures, the extrinsic chirality response of the 2D superlattice is revealed and strongly amplified by the chiral motifs under oblique inspection, leading to g-factors of ± 1.2 at ± 14°. Finally, these chiral plasmonic resonances sustained by the triskelion array are used to produce circularly polarized photoluminescence from achiral organic dyes placed on top with up to 20% of dissymmetry., X. Q. and J.M.C. kindly acknowledge the auspices of the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona. The authors aregrateful to Dr. BernatMundetforhisvaluableassistancewith EELS characterization. Authors acknowledge the use of instrumentation f inanced through Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. This work has received funding from the Spanish Agencia Estatal de Investigación (MCIN/AEI/10.13039/ 501100011033) through grants PDC2021-121475-I00, TED2021-132807BI00, PID2022-141956NB-I00 (OUTLIGHT), and CCEX2023-001263-S (Spanish Severo Ochoa Center of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). This research was also supported by the EIC PATHFINDER OPENproject 101046489 (DYNAMO) andEICPATHFINDERCHALLENGESproject101162112(RADIANT),funded bytheEuropeanUnion.X.Q.isgrateful to theChinaScholarship Council for funding (CSC No. 202206790019)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Combination of Chiral Assembly and Chiral Template Effects Boosts Circularly Polarized Luminescence of Perovskite Nanocrystals

  • Pawlak, Mateusz
  • Abramowicz, Julia
  • Maneiro, Nadesh Fiuza
  • Vinnacombe-Willson, Gail A.
  • Jo, Sunghwan
  • Benchimol, Elie
  • Roszkowski, Piotr
  • Chen, Zitao
  • Wang, Da
  • Clever, Guido H.
  • Liz Marzán, Luis M.
  • Mihi, Agustín
  • Polavarapu, Lakshminarayana
  • Lewandowski, Wiktor
Perovskite nanocrystals (PNCs) exhibiting circularly polarized luminescence (CPL) represent a promising class of materials for display and light communication technologies, owing to their emission covering the entire visible range with near-unity photoluminescence efficiency. However, these materials suffer from low selectivity in the handedness of the emitted light, with most studies focusing on green emission. We address these issues by exploiting and broadening the scope of interactions between achiral PNCs and chiral organic templates. For this purpose, we select three types of PNCs with red, green, and blue emissions and introduce them into a chiral liquid-crystalline matrix in the form of composite thin films. Electron microscopy confirmed the assembly of PNCs within nanoscale gaps formed by supramolecular, liquid crystalline structures. The obtained composites displayed a CPL dissymmetry factor glum up to ≈ 0.24. The highly dissymmetric CPL properties were found to result from an interplay between two effects: chiral assembly of PNCs within a chiral environment (intrinsic) and the selective filtering by the chiral matrix. This system enables control over the dominant factors by adjusting the CPL spectral region and type of particle assembly, providing thin film materials with highly dissymmetric and spectrally tunable CPL responses., This research was funded in part by National Science Center, Poland under the UMO-2020/39/O/ST5/03445 Preludium Bis grant. For the purpose of Open Access, the author has applied a CC-BY public copyright license to any Author Accepted Manuscript (AAM) version arising from this submission. M.P., J.A., and W.L. acknowledge funding under the Excellence Initiative program at the University of Warsaw for the TANDEM project, number WNE II.2.1/02/2023. The authors thank Diamond Light Source, Ltd for the use of B23 beamline for SM34852-1 and SM-38639 beamtimes. This work was funded by Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) through GRK2376 (“Confinement-Controlled Chemistry”, project number 331085229) and Germany's Excellence Strategy – EXC 2033–390677874 – RESOLV. This work has received funding from the Spanish Agencia Estatal de Investigación/ Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through grant CEX2023-001263-S, and by the European Union through the EIC PATHFINDER OPEN project 101046489 (DYNAMO). A.M. and L.P. acknowledge the support of the EIC PATHFINDER CHALLENGES project 101162112 (RADIANT), funded by the European Union. L. L.-M. acknowledges the support of the European Research Council (ERC Synergy Grant no. 101166855, Chiral-Pro). G.A.V.-W. acknowledges support from the European Union’s Horizon Europe Research and Innovation Program under the Marie Skłodowska-Curie grant agreement no. 101105300 (PLASMOSTEMFATE). D.W. and Z.C. acknowledge the funding support from National Natural Science Foundation of China (No. 12374211) and Guangdong Provincial Key Laboratory of Optical Information Materials and Technology (No. 2023B1212060065)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reconfigurable, Temperature Resilient Phase-Change Metasurfaces Fabricated via High Throughput Nanoimprinting Lithography

  • Ruiz de Galarreta, Carlota de
  • Zhao, Yinghao
  • Mendoza Carreño, José
  • Caicedo, José M.
  • Santiso, José
  • Wright, C. David
  • Alonso Carmona, M. Isabel
  • Li, Jiafang
  • Mihi, Agustín
The combination of metasurfaces with chalcogenide phase-change materials is a highly promising route toward the development of multifunctional and reconfigurable nanophotonic devices. However, their transition into real-world devices is hindered by several technological challenges. This includes, amongst others, the lack of large area photonic architectures produced via scalable nanofabrication methods as required for free-space photonic applications, along with the ability to withstand the high temperatures needed for the phase-change process. In this work, we present a scalable nanofabrication strategy for the production of reconfigurable metasurfaces based on high-throughput, large-area nanoimprint lithography that is fully compatible with chalcogenide phase-change materials processing. Our approach involves the direct imprinting of high-melting-point, thermally stable TiO2 nanoparticle pastes, followed by the deposition of an Sb2Se3 thin film as the phase-change material active layer. The patterned TiO2 film enables the creation of thermally robust metasurfaces, overcoming the limitations of conventional polymer-based nanoimprinting techniques. The versatility of our approach is showcased by producing phase-change devices with two distinct functionalities: (i) metasurfaces with tunable spectral band switching and amplitude modulation capabilities across the near- to mid-infrared, and (ii) reconfigurable chiral metasurfaces, whose chiroptical activity can be switched between the visible and the near-infrared. Experimental results show excellent agreement with numerical simulations and reveal high uniformity across large areas. This work provides a universal, thermally robust and scalable platform for the production of reconfigurable metasurfaces based on phase-change materials, paving the way to low-cost, photonic devices with reconfigurable optical responses that could be extended far beyond the applications demonstrated here., CRdG acknowledges funding from the Marie Sklodowska Curie Individual Fellowship METASCALE (101068089). YZ ackonwledges founding from the Chinese Council (CSC No. 202406030183). This work also received funding from the Spanish AEI through grant PID-2022-141956NB-I00 (OUTLIGHT) and the Severo Ochoa Excellence programme CEX2023-001263-S (MATRANS24). This research was also supported by the EIC PATHFINDER CHALLENGES project 101162112 (RADIANT), funded by the European Union. CDW acknowledges funding from the EPSRC (grants EP/W022931/1 and EP/W003341/1). The authors are grateful to Videsh Kumar for providing h-PDMS hole-stamps for the imprinting of triskelia m-TiO2 patterns, and to Afroditi Koutsogianni and Ana Conde-Rubio for sharing the time of their SEM sessions. Authors would like to thank Dr Anna Esther Carrillo of the ICMAB electron microscopy Service for her assistance with EDS analysis., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybridization of Gap Plasmons and Grating-Coupled Surface Plasmon Polaritons in Metal Nanoparticle Cluster Arrays on a Mirror

  • Koutsogianni, Afroditi
  • Qi, Xiaoyu
  • Mendoza Carreño, José
  • Moronta, Pedro
  • Alonso Carmona, M. Isabel
  • Amabilino, David B.
  • Mihi, Agustín
Metallic nanoparticles exhibit unique plasmonic properties, enabling the confinement of electromagnetic fields at the nanoscale. In the nanoparticle-on-mirror (NPoM) geometry, nanoparticles vertically coupled to a metallic mirror across a dielectric spacer sustain tightly confined gap plasmons with limited direct far-field access. Combining these cavities with periodic arrays allows for the excitation of diffractively excited resonances that act as radiative gateways, enabling efficient far-field excitation and enhanced coupling to the gap modes. However, preparing such hybrid metasurfaces remains challenging because of the disparate length scales involved and the reliance on poorly scalable top-down nanofabrication techniques. Here, we address these challenges by using a template-assisted self-assembly technique with metal colloids resulting in a hybrid plasmonic metasurface, a periodic array of clustered metal nanoparticles separated from a metallic film by a dielectric spacer. Our nanostructure allows the interplay of the grating-coupled Surface Plasmon Polaritons (SPP), the Surface Lattice Resonance (SLR) and the gap mode through a variety of geometrical parameters enabling hybrid mode engineering and offer a route toward advanced photonic devices with tailored optical responses., This work has received funding from the Spanish Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through grants, PID2025-173628NB-I00, and CEX2023-001263-S (Spanish Severo Ochoa Centre of Excellence program). It was also supported by the European Union through the Marie Skłodowska-Curie COFUND programme DOCFAM+ under the Horizon Europe framework (Grant Agreement No. 10181337), and by the EIC Pathfinder Challenges project RADIANT (Grant Agreement No. 101162112). The authors thank warmly Arianna Quesada Ramírez for her assistance with the blade coating technique and fruitful discussions with Luis A. Pérez. The authors also acknowledge the technical staff of the ICMAB-CSIC Scanning Probe Microscopy Laboratory for the AFM images and the Electron Microscopy Service for the TEM characterization of the nanoparticles and SEM inspection of the samples. This work has been carried out within the framework of the doctoral programme in Materials Science at the Universitat Autònoma de Barcelona., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed