Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High Q-Factor Plasmonic Surface Lattice Resonances in Colloidal Nanoparticle Arrays

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Mihi, Agustín|||0000-0003-3821-7881
Surface lattice resonances (SLRs) sustained by ordered metal arrays are characterized by their narrow spectral features, remarkable quality factors, and the ability to tune their spectral properties based on the periodicity of the array. However, the majority of these structures are fabricated using classical lithographic processes or require postannealing steps at high temperatures to enhance the quality of the metal. These limitations hinder the widespread utilization of these periodic metal arrays in various applications. In this work, we use the scalable technique of template-assisted assembly of metal colloids to produce plasmonic supercrystals over centimeter areas capable of sustaining SLRs with high Q factors reaching up to 270. Our approach obviates the need for any postprocessing, offering a streamlined and efficient fabrication route. Furthermore, our method enables extensive tunability across the entire visible and near-infrared spectral ranges, empowering the design of tailored plasmonic resonant structures for a wide range of applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Chiral plasmonic superlattices from template-assisted assembly of achiral nanoparticles

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Mendoza-Carreño, Jose|||0000-0001-8650-9913
  • Garriga, Miquel|||0000-0002-6683-0790
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Mihi, Agustín|||0000-0003-3821-7881
The creation of chiral plasmonic architectures combining templates with achiral plasmonic particles leads to strong chiroptical responses that can be finely tuned via the characteristics of the colloidal building blocks. Here we show how elastomeric molds, pre-patterned with a hexagonal array of triskelia motifs, can guide the assembly of ordinary noble metal colloids into chiral plasmonic architectures with strong dichroism values. Under normal incidence, the chiral arrays made with gold and silver colloids showed g-factors of 0.18 and 0.4, respectively. In all cases, increasing the size of the colloid allows tuning the optical properties of the structure in the VIS-NIR range. When a superstrate layer is deposited onto the structures, the extrinsic chirality response of the 2D superlattice is revealed and strongly amplified by the chiral motifs under oblique inspection, leading to g-factors of ± 1.2 at ± 14°. Finally, these chiral plasmonic resonances sustained by the triskelion array are used to produce circularly polarized photoluminescence from achiral organic dyes placed on top with up to 20% of dissymmetry.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Symmetric Metal Organic Framework-Plasmonic Architectures for Reversible and High-Sensitivity Optical Sensing

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Meng, Lingxin
  • Imaz, Inhar|||0000-0002-0278-1141
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Mihi, Agustín|||0000-0003-3821-7881
Plasmonic nanostructures have attracted considerable interest for their ability to manipulate light at the nanoscale. The optical response of these metallic architectures is greatly sensitive to changes in their surrounding environment, which makes them particularly interesting for sensing applications. Here, we report a versatile and highly sensitive plasmonic sensing platform that combines the surface lattice resonances (SLRs), sustained by 2D gratings of metal nanoparticles, and the exceptional refractive index tunability offered by ZIF-8 metal-organic framework (MOF) films. The SLRs provide narrow resonances that strongly depend on the surrounding refractive index, which can be modulated via solvent exchange in the ZIF-8. The plasmonic 2D arrays were fabricated using templated-assisted assembly of metal colloids; a scalable and gentle process that enabled the study of different ZIF-8/grating configurations. First, we studied ZIF-8 films on top of the 2D arrays, where an optimized concentration of the colloidal dispersion allowed dynamic and reversible ON/OFF tuning of the SLR response. Second, we explored the role of the refractive index mismatch between substrate and ZIF-8 superstrate. Finally, we fabricated 2D plasmonic gratings completely embedded within ZIF-8 layers, achieving enhanced sensing performance with a refractive index sensitivity of 427 ± 19 nm·RIU . These results highlight the potential of MOF-plasmonic hybrids as responsive and tunable nanophotonic platforms for next-generation optical sensing applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Q-Factor Plasmonic Surface Lattice Resonances in Colloidal Nanoparticle Arrays

  • Qi, Xiaoyu
  • Pérez, Luis Alberto
  • Alonso Carmona, M. Isabel
  • Mihi, Agustín
Surface lattice resonances (SLRs) sustained by ordered metal arrays are characterized by their narrow spectral features, remarkable quality factors, and the ability to tune their spectral properties based on the periodicity of the array. However, the majority of these structures are fabricated using classical lithographic processes or require postannealing steps at high temperatures to enhance the quality of the metal. These limitations hinder the widespread utilization of these periodic metal arrays in various applications. In this work, we use the scalable technique of template-assisted assembly of metal colloids to produce plasmonic supercrystals over centimeter areas capable of sustaining SLRs with high Q factors reaching up to 270. Our approach obviates the need for any postprocessing, offering a streamlined and efficient fabrication route. Furthermore, our method enables extensive tunability across the entire visible and near-infrared spectral ranges, empowering the design of tailored plasmonic resonant structures for a wide range of applications., This project received funding from the Spanish Ministerio de Ciencia e Innovación through grants, PDC2021-121475-I00/AEI/10.13039/501100011033, TED2021-132807B–I00 by the “European Union NextGenerationEU/PRTR, PID2019-106860GB-I00/AEI/10.13039/501100011033 and FUNFUTURE (CEX2019-000917-S)”, in the framework of the Spanish Severo Ochoa Centre of Excellence program. The authors also acknowledge AGAUR’s grant 2021-SGR-00444. X.Q. kindly acknowledges the auspices of the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona and the China Scholarship Council for funding (CSC No. 202206790019)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong Chiro-Optical Activity of Plasmonic Metasurfaces with Inverted Pyramid Arrays

  • Pérez, Luis Alberto
  • Hu, Jinhui
  • Mendoza Carreño, José
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Arteaga, Oriol
  • Goñi, Alejandro R.
  • Mihi, Agustín
Chiral plasmonics has emerged as a powerful tool for manipulating light at the nanoscale with unprecedented control over light polarization. The advances in nanofabrication have led to the creation of nanostructures that support strong chiroptical responses. However, the complexity of the fabrication and the associated high costs remain major challenges in upscaling these architectures. Here, we report on the development of chiral plasmonic metasurfaces composed of inverted pyramid arrays with mismatched directions with respect to the lattice vectors of the array. These metasurfaces are fabricated using a combination of soft lithography and anisotropic etching, resulting in cost-effective and reproducible chiral nanostructures without the need for expensive equipment. The fabricated metasurfaces exhibit high differential transmittance values in the visible spectrum, which are among the highest reported for plasmonic films. Theoretical modeling corroborates the experimental results, demonstrating the significant influence of the mismatch angle on the chiral behavior. Complete polarimetric characterization reveals exceptional chiro-optical activity with circular birefringence exceeding 375°/μm and Kuhn's dissymmetry factors (g-factors) approaching unity., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Individual Fellowship (MSCA-IF) grant agreement No. 839402 (PLASMIONICO) and from the Spanish Ministerio de Ciencia e Innovación through grants, TED2021-132807B–I00 and TED2021-129639B–I00 by the “European Union NextGenerationEU/PRTR. Financial support from the State Investigation Agency through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S) and PID2022-141956NB-I00 (OUTLIGHT) and from the Catalan agency AGAUR (2021-SGR-00444) is gratefully acknowledged as well. JH acknowledges a fellowship from the China Scholarship Council (CSC) and the PhD program in Materials Science from Universitat Autònoma de Barcelona, in which he was enrolled., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed