Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Chiral plasmonic superlattices from template-assisted assembly of achiral nanoparticles

  • Qi, Xiaoyu|||0009-0008-8677-7879
  • Pérez, Luis Alberto|||0000-0003-2802-4891
  • Mendoza-Carreño, Jose|||0000-0001-8650-9913
  • Garriga, Miquel|||0000-0002-6683-0790
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Mihi, Agustín|||0000-0003-3821-7881
The creation of chiral plasmonic architectures combining templates with achiral plasmonic particles leads to strong chiroptical responses that can be finely tuned via the characteristics of the colloidal building blocks. Here we show how elastomeric molds, pre-patterned with a hexagonal array of triskelia motifs, can guide the assembly of ordinary noble metal colloids into chiral plasmonic architectures with strong dichroism values. Under normal incidence, the chiral arrays made with gold and silver colloids showed g-factors of 0.18 and 0.4, respectively. In all cases, increasing the size of the colloid allows tuning the optical properties of the structure in the VIS-NIR range. When a superstrate layer is deposited onto the structures, the extrinsic chirality response of the 2D superlattice is revealed and strongly amplified by the chiral motifs under oblique inspection, leading to g-factors of ± 1.2 at ± 14°. Finally, these chiral plasmonic resonances sustained by the triskelion array are used to produce circularly polarized photoluminescence from achiral organic dyes placed on top with up to 20% of dissymmetry.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Emerging topics in nanophononics and elastic, acoustic, and mechanical metamaterials: an overview

  • Krushynska, Anastasiia O.
  • Torrent, Daniel
  • Aragón, Alejandro M.
  • Ardito, Raffaele
  • Bilal, Osama R.
  • Bonello, Bernard
  • Bosia, Federico
  • Chen, Yi
  • Christensen, Johan
  • Colombi, Andrea
  • Cummer, Steven A.
  • Djafari-Rouhani, Bahram
  • Fraternali, Fernando
  • Galich, Pavel I.
  • García, Pedro David
  • Groby, Jean-Philippe
  • Jimenez, Noe|||0000-0002-6539-670X
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] This broad review summarizes recent advances and "hot " research topics in nanophononics and elastic, acoustic, and mechanical metamaterials based on results presented by the authors at the EUROMECH 610 Colloquium held on April 25-27, 2022 in Benicassim, Spain. The key goal of the colloquium was to highlight important developments in these areas, particularly new results that emerged during the last two years. This work thus presents a "snapshot " of the state-of-the-art of different nanophononics- and metamaterial-related topics rather than a historical view on these subjects, in contrast to a conventional review article. The introduction of basic definitions for each topic is followed by an outline of design strategies for the media under consideration, recently developed analysis and implementation techniques, and discussions of current challenges and promising applications. This review, while not comprehensive, will be helpful especially for early-career researchers, among others, as it offers a broad view of the current state-of-the-art and highlights some unique and flourishing research in the mentioned fields, providing insight into multiple exciting research directions., This work is supported by the DYNAMO project (101046489) funded by the European Union. Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or European Innovation Council. Neither the European Union nor the granting authority can be held responsible for them. This publication is part of the project PID2021-124814NB-C22, funded by MCIN/AEI/10.13039/501100011033/"FEDER A way of making Europe".
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

The combination of chiral assembly and chiral template effects boosts circularly polarized luminescence of perovskite nanocrystals

  • Pawlak, Mateusz
  • Abramowicz, Julia
  • Fiuza Maneiro, Nadesh
  • Vinnacombe‐Willson, Gail A.
  • Jo, Sunghwan
  • Benchimol, Elie
  • Roszkowski, Piotr
  • Chen, Zitao
  • Wang, Da
  • Clever, Guido H.
  • Liz‐Marzán, Luis M.
  • Mihi, Agustín
  • Polavarapu , Lakshminarayana
  • Lewandowski, Wiktor
Perovskite nanocrystals (PNCs) exhibiting circularly polarized luminescence (CPL) represent a promising class of materials for display and light communication technologies, owing to their emission covering the entire visible range with near‐unity photoluminescence efficiency. However, these materials suffer from low selectivity in the handedness of the emitted light, with most studies focusing on green emission. We address these issues by exploiting and broadening the scope of interactions between achiral PNCs and chiral organic templates. For this purpose, we select three types of PNCs with red, green, and blue emissions and introduce them into a chiral liquid‐crystalline matrix in the form of composite thin films. Electron microscopy confirmed the assembly of PNCs within nanoscale gaps formed by supramolecular, liquid crystalline structures. The obtained composites displayed a CPL dissymmetry factor g lum up to ≈ 0.24. The highly dissymmetric CPL properties were found to result from an interplay between two effects: chiral assembly of PNCs within a chiral environment (intrinsic) and the selective filtering by the chiral matrix. This system enables control over the dominant factors by adjusting the CPL spectral region and type of particle assembly, providing thin film materials with highly dissymmetric and spectrally tunable CPL responses., Narodowe Centrum Nauki (Polonia) | Ref. UMO‐2020/39/O/ST5/03445, Uniwersytet Warszawski (Polonia) | Ref. WNE II.2.1/02/2023, Agencia Estatal de Investigación | Ref. CEX2023‐001263‐S, Deutsche Forschungsgemeinschaft | Ref. 390677874, Deutsche Forschungsgemeinschaft | Ref. 331085229, National Natural Science Foundation of China | Ref. 12374211
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoimprinted 2D-chiral Perovskite Nanocrystal Metasurfaces for Circularly Polarized Photoluminescence

  • Mendoza Carreño, José
  • Molet, Pau
  • Otero Martínez, Clara
  • Alonso Carmona, M. Isabel
  • Polavarapu, Lakshminarayana
  • Mihi, Agustín
The versatile hybrid perovskite nanocrystals are one of the most promising materials for optoelectronics in virtue of their tunable bandgaps and high photoluminescence quantum yields. However, their inherent crystalline chemical structure limits the chiroptical properties achievable with the material. The production of chiral perovskites has become an active field of research for its promising applications in optics, chemistry or biology. Typically, chiral halide perovskites are obtained by the incorporation of different chiral moieties in the material. Unfortunately, these chemically modified perovskites have demonstrated moderate values of chiral photoluminescence so far. Here we introduce a general and scalable approach to produce chiral photoluminescence from arbitrary nano-emitters assembled into 2D-chiral metasurfaces. The fabrication via nanoimprinting lithography employs elastomeric molds engraved with chiral motifs covering millimeter areas that are used to pattern two types of unmodified colloidal perovskite nanocrystal inks: green-emissive CsPbBr3 and red-emissive CsPbBr1 I2 . The perovskite 2D-metasurfaces exhibit remarkable photoluminescence dissymmetry factors (glum ) of 0.16 that can be further improved up to glum of 0.3 by adding a high refractive index coating on the metasurfaces. This scalable approach to produce chiral photoluminescent thin films paves the way for the seamless production of bright chiral light sources for upcoming optoelectronic applications. This article is protected by copyright. All rights reserved., JMCand PMcontributed equally to this work. This project has received funding (AEI/FEDER,-UE) from the Spanish Ministerio de Ciencia e Innovación through grants PID2019-106860GB-I00/AEI/10.13039/501100011033(HIGHN), and CEX2019-000917-S (FUNFUTURE, Spanish Severo Ochoa Centre of Excellence program) and from the Generalitat de Catalunya (2017-SGR-00488). This research was also supported by the EIC PATHFINDER OPEN project 101046489 (DYNAMO), funded by the European Union.JMC and PM acknowledge FPI fellowships (PRE2020-09411and BES2017-080150) from MICINN cofinanced by the European Social Fund and the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona. L.P. acknowledges support from the Spanish Ministerio de Ciencia e Innovación through Ramón y Cajal grant (RYC2018-026103-I) and the Spanish State Research Agency (Grant PID2020-117371RA-I00) and a grant from the Xunta de Galicia (ED431F2021/05)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emerging topics in nanophononics and elastic, acoustic, and mechanical metamaterials: An overview

  • Krushynska, Anastasiia O.
  • Torrent, Daniel
  • Aragón, Alejandro M.
  • Ardito, Raffaele
  • Bilal, Osama R.
  • Bonello, Bernard
  • Bosia, Federico
  • Chen, Yi
  • Christensen, Johan
  • Colombi, Andrea
  • Cummer, Steven A.
  • Djafari-Rouhani, Bahram
  • Fraternali, Fernando
  • Galich, Pavel I.
  • García Fernández, Pedro David
  • Groby, Jean Philippe
  • Guenneau, Sebastien
  • Haberman, Michael R.
  • Hussein, Mahmoud I.
  • Janbaz, Shahram
  • Jiménez González, Noé
  • Khelif, Abdelkrim
  • Laude, Vincent
  • Mirzaali, Mohammad J.
  • Packo, Pawel
  • Palermo, Antonio
  • Pennec, Yan
  • Picó, Rubén
  • Rosendo López, María
  • Rudykh, Stephan
  • Serra-García, Marc
  • Sotomayor Torres, C. M.
  • Starkey, Timothy A.
  • Tournat, Vincent
  • Wright, Oliver B.
This broad review summarizes recent advances and "hot"research topics in nanophononics and elastic, acoustic, and mechanical metamaterials based on results presented by the authors at the EUROMECH 610 Colloquium held on April 25-27, 2022 in Benicássim, Spain. The key goal of the colloquium was to highlight important developments in these areas, particularly new results that emerged during the last two years. This work thus presents a "snapshot"of the state-of-the-art of different nanophononics- and metamaterial-related topics rather than a historical view on these subjects, in contrast to a conventional review article. The introduction of basic definitions for each topic is followed by an outline of design strategies for the media under consideration, recently developed analysis and implementation techniques, and discussions of current challenges and promising applications. This review, while not comprehensive, will be helpful especially for early-career researchers, among others, as it offers a broad view of the current state-of-the-art and highlights some unique and flourishing research in the mentioned fields, providing insight into multiple exciting research directions., This work is supported by the DYNAMO project (101046489) funded by the European Union., This publication is part of the project PID2021-124814NB-C22, funded by MCIN/AEI/10.13039/501100011033/ “FEDER A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-refractive-index 2D photonic structures for robust low-threshold multiband lasing

  • Conde Rubio, Ana
  • Deop-Ruano, Juan R.
  • Cerdán, L.
  • Manjavacas, Alejandro
  • Mihi, Agustín
High-refractive-index (HRI) dielectrics are gaining increasing attention as building blocks for compact lasers. Their ability to simultaneously support both electric and magnetic modes provides greater versatility as compared to plasmonic platforms. Moreover, their reduced absorption loss minimizes heat generation, further enhancing their performance. Here, we employ a scalable soft nanoimprinting lithography method to create a series of two-dimensional (2D) periodic square hole arrays in polymeric films (SU-8), which are coated with an HRI dielectric layer (TiO2). These structures exhibit low-threshold lasing from an organic dye-doped SU-8 layer deposited on top. We study arrays with different lattice parameters and a sample with a random distribution of holes, finding that the optimal laser performance occurs when the optical resonances of the array align with the emission wavelength range of the dye. Furthermore, we observe that the anisotropy in the TiO2 coating breaks the polarization degeneracy of the square arrays, leading to the emergence of new modes and enabling the simultaneous appearance of multiple lasing peaks. Our work shows that, despite the simplicity of their fabrication process, the HRI structures studied here exhibit a high degree of complexity, leading to a rich optical response and enabling multiband lasing. This offers an innovative approach to building robust HRI platforms for lasing with improved control over their emission properties., This project has received funding from the EIC PATHFINDER OPEN project 101046489 (DYNAMO), funded by the European Union. This research was also supported by the Spanish Agencia Estatal de Investigación (MICIU/AEI/10.13039/501100011033) through the I + D + I project CEX2023-001263-S (Spanish Severo Ochoa Centre of Excellence program), PID2022-141956NB-I00, and PID2022-137569NB-C42, as well as the Generalitat de Catalunya (2021-SGR-00444). A. C.-R. acknowledges support from the postdoctoral fellowship program Beatriu de Pinós 2022 BP 00083, funded by the Secretary of Universities and Research (Government of Catalonia), partially funded by H2020-MSCA-COFUND-2022 through grant agreement 801370. J.R.D-R. acknowledges support from a predoctoral fellowship from the MCIN/AEI assigned to PID2019-109502GA-I00. L.C. acknowledges support from a Ramón y Cajal Research Fellowship, Grant RYC2022-038362-I, funded by MCIN/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optomechanical Coupling Optimization in Engineered Nanocavities

  • Edelstein, Shulamit
  • Gomis-Bresco, J.
  • Arregui, Guillermo
  • Koval, Peter
  • Lanzillotti-Kimura, Norberto Daniel
  • Torrent, Daniel
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
In optomechanics, the interaction between light and matter is enhanced by engineering cavities where the electromagnetic field and the mechanical displacement are confined simultaneously within the same volume. This leads to a wide range of interesting phenomena, such as optomechanically induced transparency and the cooling of macroscopic objects to their lowest possible motion state. In this manuscript, the focus is on designed optomechanical cavities exploiting heterostructures in air-slot photonic-crystal waveguides, incorporating different hole shapes and dimensions to engineer and control their optomechanical properties. The aim is to maximize the optical quality factor of the optical cavity, while ensuring optical mode volumes below the diffraction limit. These optimized optical modes interact with in-plane motional degrees of freedom of the structures achieving high optomechanical coupling rates, thus opening up the possibility of mechanical amplification, nonlinear dynamics and chaos through the optomechanical back-action., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (SEV-2017-0706), This work was supported by the Spanish Minister of Science, Innovation and Universities via the Severo Ochoa Program (Grant no. SEV-2017-0706), as well as by the CERCA Program/Generalitat de Catalunya and the EU-H2020 FET Proactive project TOCHA (no. 824140). P.D.G. gratefully acknowledges the support by the national project PID2021-124814NB-C21 (SPHAM) and the HORIZON-EIC-2022 pathfinder project NEUROPIC (Grant no. 101098961). D.T. acknowledged the support by the HORIZON-EIC-2021 pathfinder project DYNAMO (Grant no. 101046489). C.M.S.T acknowledged the support of the national project SIP (Grant no. PGC2018-104333-BI00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chiral plasmonic superlattices from template-assisted assembly of achiral nanoparticles

  • Qi, Xiaoyu
  • Pérez, Luis Alberto
  • Mendoza Carreño, José
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Mihi, Agustín
The creation of chiral plasmonic architectures combining templates with achiral plasmonic particles leads to strong chiroptical responses that can be finely tuned via the characteristics of the colloidal building blocks. Here we show how elastomeric molds, pre-patterned with a hexagonal array of triskelia motifs, can guide the assembly of ordinary noble metal colloids into chiral plasmonic architectures with strong dichroism values. Under normal incidence, the chiral arrays made with gold and silver colloids showed g-factors of 0.18 and 0.4, respectively. In all cases, increasing the size of the colloid allows tuning the optical properties of the structure in the VIS-NIR range. When a superstrate layer is deposited onto the structures, the extrinsic chirality response of the 2D superlattice is revealed and strongly amplified by the chiral motifs under oblique inspection, leading to g-factors of ± 1.2 at ± 14°. Finally, these chiral plasmonic resonances sustained by the triskelion array are used to produce circularly polarized photoluminescence from achiral organic dyes placed on top with up to 20% of dissymmetry., X. Q. and J.M.C. kindly acknowledge the auspices of the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona. The authors aregrateful to Dr. BernatMundetforhisvaluableassistancewith EELS characterization. Authors acknowledge the use of instrumentation f inanced through Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. This work has received funding from the Spanish Agencia Estatal de Investigación (MCIN/AEI/10.13039/ 501100011033) through grants PDC2021-121475-I00, TED2021-132807BI00, PID2022-141956NB-I00 (OUTLIGHT), and CCEX2023-001263-S (Spanish Severo Ochoa Center of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). This research was also supported by the EIC PATHFINDER OPENproject 101046489 (DYNAMO) andEICPATHFINDERCHALLENGESproject101162112(RADIANT),funded bytheEuropeanUnion.X.Q.isgrateful to theChinaScholarship Council for funding (CSC No. 202206790019)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Picosecond acoustics for mass characterization of nanoparticles on thin membranes

  • Glushkov, Evgeny
  • Glushkova, Natalia
  • Soldevila, Fernando
  • Belliard, L.
  • Baltogiannis, S.
  • Paćko, Pawel
  • Jo, Sunghwan
  • Mihi, Agustín
  • Torrent, Daniel
  • Boyko, Olga
In this paper, we demonstrate the potential of laser picosecond acoustics for characterizing the averaged mass of nanoparticles distributed on the surface of submicron-thin membranes. Specifically, we investigate guided-wave (GW) propagation in thin membranes covered with silicon oxide nanospheres. By employing picosecond acoustics, we excite and detect GWs, generating spatiotemporal maps of acoustic behavior that visualize the GW dispersion curves. Such dispersion curves are also calculated using a computer model, which implements a semianalytical Green's-matrix-based solution to the corresponding boundary-value problem. Based on these data, inverse problems are solved to determine the effective elastic parameters of the membrane and the average mass of particles per unit surface. The method exhibits high sensitivity in detecting masses as small as 200 femtograms per square micron. The wide field of view provided by the picosecond technique enables efficient scanning of millimetric surfaces with the potential to detect mass variations at the hundred-femtogram level over large areas., The experimental part of this work was supported by the HORIZON EIC Grants DYNAMO (Grant No. 101046489), and the mathematical and computer simulation part was supported by the Russian Science Foundation (Project No. 24-11-00140). This research was also supported by the Spanish Agencia Estatal de Investigación (MICIU/AEI/10.13039/501100011033) through the I+D+I project CEX2023-001263-S (Spanish Severo Ochoa Centre of Excellence program). The authors extend their gratitude to B. Perrin for insightful discussions and invaluable advice throughout this research, as well as to E. Dandeu for clean-room characterization., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Combination of Chiral Assembly and Chiral Template Effects Boosts Circularly Polarized Luminescence of Perovskite Nanocrystals

  • Pawlak, Mateusz
  • Abramowicz, Julia
  • Maneiro, Nadesh Fiuza
  • Vinnacombe-Willson, Gail A.
  • Jo, Sunghwan
  • Benchimol, Elie
  • Roszkowski, Piotr
  • Chen, Zitao
  • Wang, Da
  • Clever, Guido H.
  • Liz Marzán, Luis M.
  • Mihi, Agustín
  • Polavarapu, Lakshminarayana
  • Lewandowski, Wiktor
Perovskite nanocrystals (PNCs) exhibiting circularly polarized luminescence (CPL) represent a promising class of materials for display and light communication technologies, owing to their emission covering the entire visible range with near-unity photoluminescence efficiency. However, these materials suffer from low selectivity in the handedness of the emitted light, with most studies focusing on green emission. We address these issues by exploiting and broadening the scope of interactions between achiral PNCs and chiral organic templates. For this purpose, we select three types of PNCs with red, green, and blue emissions and introduce them into a chiral liquid-crystalline matrix in the form of composite thin films. Electron microscopy confirmed the assembly of PNCs within nanoscale gaps formed by supramolecular, liquid crystalline structures. The obtained composites displayed a CPL dissymmetry factor glum up to ≈ 0.24. The highly dissymmetric CPL properties were found to result from an interplay between two effects: chiral assembly of PNCs within a chiral environment (intrinsic) and the selective filtering by the chiral matrix. This system enables control over the dominant factors by adjusting the CPL spectral region and type of particle assembly, providing thin film materials with highly dissymmetric and spectrally tunable CPL responses., This research was funded in part by National Science Center, Poland under the UMO-2020/39/O/ST5/03445 Preludium Bis grant. For the purpose of Open Access, the author has applied a CC-BY public copyright license to any Author Accepted Manuscript (AAM) version arising from this submission. M.P., J.A., and W.L. acknowledge funding under the Excellence Initiative program at the University of Warsaw for the TANDEM project, number WNE II.2.1/02/2023. The authors thank Diamond Light Source, Ltd for the use of B23 beamline for SM34852-1 and SM-38639 beamtimes. This work was funded by Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) through GRK2376 (“Confinement-Controlled Chemistry”, project number 331085229) and Germany's Excellence Strategy – EXC 2033–390677874 – RESOLV. This work has received funding from the Spanish Agencia Estatal de Investigación/ Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) through grant CEX2023-001263-S, and by the European Union through the EIC PATHFINDER OPEN project 101046489 (DYNAMO). A.M. and L.P. acknowledge the support of the EIC PATHFINDER CHALLENGES project 101162112 (RADIANT), funded by the European Union. L. L.-M. acknowledges the support of the European Research Council (ERC Synergy Grant no. 101166855, Chiral-Pro). G.A.V.-W. acknowledges support from the European Union’s Horizon Europe Research and Innovation Program under the Marie Skłodowska-Curie grant agreement no. 101105300 (PLASMOSTEMFATE). D.W. and Z.C. acknowledge the funding support from National Natural Science Foundation of China (No. 12374211) and Guangdong Provincial Key Laboratory of Optical Information Materials and Technology (No. 2023B1212060065)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering Chiroptical Interactions through Integrating Plasmonic Arrays with Cholesteric Nanocellulose

  • Tao, Han
  • Jo, Sunghwan
  • Chu, Guang
  • Qi, Xiaoyu
  • Estévez, Irene
  • Lizana, Angel
  • Xu, Wenyang
  • Deng, Shengwei
  • Mihi, Agustín
  • Kontturi, Eero
Achieving scalable fabrication with precise control of chiroptical properties in chiral plasmonic materials remains challenging. We present a new family of engineered chiroptical composites comprising linearly assembled gold nanoparticle arrays integrated with cholesteric self-assembled cellulose nanocrystals (CNCs). Aqueous CNC suspensions are cast onto pre-assembled achiral plasmonic nanoparticle arrays via evaporation-induced transfer imprinting lithography, yielding centimeter-scale hybrid films with custom-tailored chiroptical responses. During drying, CNCs co-assemble with the gold nanoparticles at the interface, preserving the array's linear arrangement and keeping it isolated from the overlying cholesteric CNC layers. This configuration combines the linear dichroism of the plasmonic array with the linear birefringence of the CNC matrix, producing strong and tunable plasmonic circular dichroism at the surface lattice resonance, reaching 1217 ± 51 mdeg with a dissymmetry factor of -0.19 ± 0.02. Our approach provides a sustainable platform for engineering multifunctional chiral plasmonic materials with potential applications in optical sensing, photonic devices, and chiral biointerfaces., H.T. acknowledges financial support from Alfred Kordelin Foundation and Academy of Finland (No. 318890 and 318891, Competence Centre for Materials Bioeconomy, FinnCERES). H.T. acknowledges the provision of facilities and technical support by Aalto University at OtaNano-Nanomicroscopy Center (Aalto-NMC). G.C. acknowledges financial support from the National Natural Science Foundation of China (No. 22572028) and the Open Project of State Key Laboratory of Inorganic Synthesis and Preparative Chemistry (Grant number: 2025-2). This work has received funding from the Spanish Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through grants, PID2022-141956NB-I00 (OUTLIGHT). ICMAB is supported by the Severo Ochoa program from the Spanish MINECO (CCEX2023-001263-S). This research was also kindly supported by the European Union through the EIC PATHFINDER OPEN project 101046489 (DYNAMO). X.Q. is grateful to the China Scholarship Council and the auspices of the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona. I.E. and A.L. acknowledge financial support from Ministerio de Ciencia e Innovación and Fondos FEDER (PID2021-562-126509OB-C21 and PDC2022-133332-C21) and Generalitat de Catalunya (2021SGR00138). The authors acknowledge the assistance of the ICMAB-CSIC Electron Microscopy Services. The authors sincerely thank Prof. Nicholas A. Kotov and Dr. Luis Alberto Pérez for their valuable suggestions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Circularly Polarized Lasing in Nanocellulose-Silica Composites

  • Jo, Sunghwan
  • Estévez, Irene
  • Lizana, Angel
  • Campos, Juan
  • Mihi, Agustín
Crystalline nanocellulose (CNC) is a nanometric form of cellulose known for its cholesteric structure, imparting circular dichroism to the material. CNC has been used in many photonic applications, exploiting its chiroptical properties to produce circularly polarized photoluminescence. In this work, an insightful characterization of the polarimetric response of nanocrystalline cellulose created through the scalable process of vacuum filtration is performed. This study confirms the strong dichroic character of the nanocellulose films but also reveals a significant linear dichroism contribution, which in turn limits the use of the material to produce a higher degree of circularly polarized light. Here, it is demonstrated that the incorporation of silica nanospheres into the CNC matrix significantly reduces the linear dichroism in the film. More importantly, the decrease in linear diattenuation correlates with an increase in circular dichroism, leading to samples with improved performance as circular polarizers (circular diattenuator). The enhanced chiroptical response of the silica-nanocellulose composites is demonstrated by building a chiral lasing system consisting of a thin layer of resist containing an organic dye (rhodamine B) enclosed between two layers of nanocrystalline cellulose. A maximum photoluminescence dissymmetry factor of 0.57 is observed at the wavelength of 611 nm., This work had received funding from the Spanish Agencia Estatal de Investigación/ Spanish Ministry of Science and Innovation (AEI/MCIN) through grants PID2022-141956NB-I00 MCIN/AEI/10.13039/501100011033(OUTLIGHT), and CEX2019-000917-S (FUNFUTURE, Spanish Severo Ochoa Centre of Excellence program) and from the Generalitat de Catalunya (2021-SGR-00444). This research was also kindly supported by the European Union through the ERC Proof of Concept 101069234 (CELLO) and the EIC PATHFINDER OPEN project 101046489 (DYNAMO). J.C., I.E., and A.L. acknowledge funding by the Ministerio de Ciencia de Innovación and Fondos FEDER (PID2021-126509OB-C21)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Emerging topics in nanophononics and elastic, acoustic, and mechanical metamaterials, An overview

  • Krushynska, Anastasiia O.|||0000-0003-3259-2592
  • Torrent, Daniel|||0000-0001-7092-7360
  • Aragón, Alejandro M.
  • Ardito, Raffaele
  • Bilal, Osama R.|||0000-0003-3803-5084
  • Bonello, Bernard
  • Bosia, Federico|||0000-0002-2886-4519
  • Chen, Yi
  • Christensen, Johan
  • Colombi, Andrea
  • Cummer, Steven A.
  • Djafari-Rouhani, Bahram|||0000-0001-6983-9689
  • Fraternali, Fernando
  • Galich, Pavel I.
  • García Fernández, Pedro David|||0000-0002-3422-178X
  • Groby, Jean-Philippe
  • Guenneau, Sebastien
  • Haberman, Michael R.
  • Hussein, Mahmoud I.|||0000-0002-6583-1425
  • Janbaz, Shahram
  • Jiménez, Noé
  • Khelif, Abdelkrim
  • Laude, Vincent
  • Mirzaali, Mohammad J.
  • Packo, Pawel
  • Palermo, Antonio
  • Pennec, Yan|||0000-0002-4719-9913
  • Picó, Rubén
  • López, María Rosendo
  • Rudykh, Stephan
  • Serra-Garcia, Marc
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Starkey, Timothy A.|||0000-0001-6027-1046
  • Tournat, Vincent
  • Wright, Oliver B.
This broad review summarizes recent advances and "hot"research topics in nanophononics and elastic, acoustic, and mechanical metamaterials based on results presented by the authors at the EUROMECH 610 Colloquium held on April 25-27, 2022 in Benicássim, Spain. The key goal of the colloquium was to highlight important developments in these areas, particularly new results that emerged during the last two years. This work thus presents a "snapshot"of the state-of-the-art of different nanophononics- and metamaterial-related topics rather than a historical view on these subjects, in contrast to a conventional review article. The introduction of basic definitions for each topic is followed by an outline of design strategies for the media under consideration, recently developed analysis and implementation techniques, and discussions of current challenges and promising applications. This review, while not comprehensive, will be helpful especially for early-career researchers, among others, as it offers a broad view of the current state-of-the-art and highlights some unique and flourishing research in the mentioned fields, providing insight into multiple exciting research directions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optomechanical Coupling Optimization in Engineered Nanocavities

  • Edelstein, S.
  • Gomis-Bresco, Jordi|||0000-0002-6066-7064
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Koval, P.
  • Lanzillotti-Kimura, N.D.
  • Torrent, D.
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • García Fernández, Pedro David|||0000-0002-3422-178X
In optomechanics, the interaction between light and matter is enhanced by engineering cavities where the electromagnetic field and the mechanical displacement are confined simultaneously within the same volume. This leads to a wide range of interesting phenomena, such as optomechanically induced transparency and the cooling of macroscopic objects to their lowest possible motion state. In this manuscript, the focus is on designed optomechanical cavities exploiting heterostructures in air-slot photonic-crystal waveguides, incorporating different hole shapes and dimensions to engineer and control their optomechanical properties. The aim is to maximize the optical quality factor of the optical cavity, while ensuring optical mode volumes below the diffraction limit. These optimized optical modes interact with in-plane motional degrees of freedom of the structures achieving high optomechanical coupling rates, thus opening up the possibility of mechanical amplification, nonlinear dynamics and chaos through the optomechanical back-action.