Pasar al contenido principal

PRODUCCION Y ESTUDIO DE MATERIALES FOTONICOS Y ACUSTICOS ESTRUCTURADOS

PID2021-124814NB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mie scattering based measurements of the optical size of single spherical dielectric microparticles

  • Tribaldo, Isaac
  • Molezuelas-Ferreras, Martin
  • Cifuentes, Ángel
  • López, Cefe
  • Molina-Terriza, Gabriel
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
[EN] The scattering of light by dielectric particles has significant implications for fields such as atmospheric science, optical sensing, and material characterization. We present an experimental study of the backscattered spectra of different dielectric materials, employing tightly focused Laguerre-Gaussian beams as incident light. Analysis of the experimental data allows us to determine the optical size of the measured spheres. Due to the extended wavelength range used in the experiments, the influence of the dispersion of the refractive index is also studied, unveiling that the oscillatory behavior of the spectra is related to the group velocity of the material. Circularly polarized Laguerre-Gaussian beams with different topological charges are also employed to probe the scattering process. We evaluated the limitations of the method depending on the particle sizes. We also compare some similarities of our analysis with the theory of cavities., I.T., M.M.-F., A.C., and G.M.-T. acknowledge the support from CSIC Research Platform on Quantum Technologies Grant No. PTI-001, from IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC/MPC on behalf of the Department of Education of the Basque Government, and from Project No. PID2022-143268NBI00 of Ministerio de Ciencia, Innovacion y Universidades. M.M.-F. also acknowledges the financial support from the Spanish Ministerio de Ciencia, Innovacion y Universidades through the FPI PhD Fellowship, Grant No. FIS-2017-87363-P. R.F. acknowledges the support of Grant No. PID2021-123163OB-I00 and Grant No. CEX2021-001230-S (Severo Ochoa Center of Excellence program) projects of the Spanish Ministerio de Ciencia, Innovacion y Universidades. C.L. acknowledges the financial support from Grant No. PID2021-124814NB-C21 funded by MCIN/AEI/10.13039/501100011033/.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Research data supporting "Characterizing the Backscattered Spectrum of Mie Spheres"

  • Molezuelas-Ferreras, Martín
  • Nodar, Álvaro
  • Barra-Burillo, María
  • Olmos-Trigo, Jorge
  • Lasa-Alonso, Jon
  • Gómez-Viloria, Iker
  • Posada, Elena
  • Varga, J.J.M.
  • Esteban, Ruben
  • Aizpurua, Javier
  • Hueso, Luis E.
  • López, Cefe
  • Molina-Terriza, Gabriel
Each folder contains .txt files of the data for each of the figures indicated on its name, together with README instructions on each case., The file contains the dataset corresponding to the figures of the article "Characterizing the Backscattered Spectrum of Mie Spheres" written by Martín Molezuelas-Ferreras, Álvaro Nodar, María Barra-Burillo, Jorge Olmos-Trigo, Jon Lasa-Alonso, Iker Gómez-Viloria, Elena Posada, J. J. Miguel Varga, Rubén Esteban, Javier Aizpurua, Luis E. Hueso, Cefe Lopez, and Gabriel Molina-Terriza (DOI: 10.1002/lpor.202300665). The data is organized into different folders, and each folder contains .txt files of the data for each of the figures indicated on its name, together with README instructions on each case., PRE2018-085136. MCIN/AEI/10.13039 /501100011033 through Project Ref. No. FIS2017-87363-P. MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future” through Project Ref. No. BES-2017-080073. MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” through Project Ref. No. PID2022-139579NB-I00. Department of Education, Research and Universities of the Basque Government through Project Ref. No. IT 1526-22. CSIC Research Platform PTI-001. MCIN/AEI/10.13039/501100011033 through Project Ref. No. MDM-2016-0618. MCIN/AEI/10.13039/501100011033 and the European UnionNextGenerationEU/PRTR through the Juan de la Cierva Fellowship Ref. No. FJC2021-047090-I. MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” through Project Ref. No. PID-2022-137569NBC43. MCIN/AEI/10.13039/501100011033 through Project Ref. No. PID2021-124814NB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assembly of covalent organic frameworks into colloidal photonic crystals

  • Fonseca, Javier
  • Meng, Lingxin
  • Moronta, Pedro
  • Imaz, Inhar
  • López, Cefe
  • Maspoch, Daniel
Self-assembly of colloidal particles into ordered superstructures is an important strategy to discover new materials, such as catalysts, plasmonic sensing materials, storage systems, and photonic crystals (PhCs). Here we show that porous covalent organic frameworks (COFs) can be used as colloidal building particles to fabricate porous PhCs with an underlying face-centered cubic (fcc) arrangement. We demonstrate that the Bragg reflection of these can be tuned by controlling the size of the COF particles and that species can be adsorbed within the pores of the COF particles, which in turn alters the Bragg reflection. Given the vast number of existing COFs, with their rich properties and broad modularity, we expect that our discovery will enable the development of colloidal PhCs with unprecedented functionality., This work received funding from Grants PID2021-123265NB-I00 and PID2021-124814NB-C21 funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe” and the Catalan AGAUR (Project 2021 SGR 00458). It was also funded by the CERCA Program/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa Centres of Excellence Programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. L.M. acknowledges the China Scholarship Council for scholarship support. P.M. acknowledges FPI Grant PRE2019-091452 funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fano-Like Resonance from Disorder Correlation in Vacancy-Doped Photonic Crystals

  • Pariente González, J. Ángel
  • Bayat, Farzaneh
  • Blanco Montes, Álvaro
  • García-Martín, Antonio
  • Pecharromán, Carlos
  • Marqués, Manuel I.
  • López, Cefe
By preparing colloidal crystals with random missing scatterers, crystals are created where disorder is embodied as vacancies in an otherwise perfect lattice. In this special system, there is a critical defect concentration where light propagation undergoes a transition from an all but perfect reflector (for the spectral range defined by the Bragg condition), to a metamaterial exhibiting an enhanced transmission phenomenon. It is shown that this behavior can be phenomenologically described in terms of Fano-like resonances. The results show that the Fano's parameter q experiences a sign change signaling the transition from a perfect crystal exhibiting a reflectance Bragg peak, through a state where background scattering is maximum and Bragg reflectance reaches a minimum to a point where the system reenters a low scattering state recovering ordinary Bragg diffraction. A simple dipolar model considering the correlation between scatterers and vacancies is proposed and the reported evolution of the Fano-like scattering is explained in terms of the emerging covariance between the optical paths and polarizabilities and the effect of field enhancement in photonic crystal (PhC) defects., This work was partially funded by the Spanish PID2021-124814NB-C21, PGC2018-095777-B-C22, PID2019-109905GA-C22, the “María de Maeztu” Programme for Units of Excellence in R& D (CEX2018-000805-M), the UAM-CAM project (SI1/PJI/2019-00052) projects. The authors thankfully acknowledge N. de Sousa for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterizing the Backscattered Spectrum of Mie Spheres

  • Molezuelas-Ferreras, Martín
  • Nodar, Álvaro
  • Barra-Burillo, María
  • Olmos-Trigo, Jorge
  • Lasa-Alonso, Jon
  • Gómez-Viloria, Iker
  • Posada, Elena
  • Varga, J.J.M.
  • Esteban, Ruben
  • Aizpurua, Javier
  • Hueso, Luis E.
  • López, Cefe
  • Molina-Terriza, Gabriel
The data that support the findings of this study are available from the corresponding author upon reasonable request. The data used for the figures and results in this article can be found at the digital.csic.es repository http://hdl.handle.net/10261/339860, This study describes both experimentally and theoretically an important hitherto undiscovered feature of the scattering of micron-sized spherical objects when illuminated with highly focused circularly polarized light. This is a regime of high experimental relevance which has not been described in full detail. The experiments are complemented with the analytical formulas explaining the field scattered directed toward the backward hemispace. In particular, it is proven that this field shows a very regular oscillatory dependency with the optical size. This phenomenon is typically hidden in the total scattered field, as the field is scattered much less toward the backward hemisphere than toward the forward one. These regular oscillations are measured experimentally. It is proven that, by analyzing them, it is possible to determine the index of refraction of isolated micron-sized particles, opening new paths for applications in sensing and metrology., M.M.F acknowledges financial support from MCIN/AEI/10.13039/501100011033 and “ESF Investing in your Future” through Project Ref. No PRE2018-085136. M.M.F. and G.M.T. acknowledge financial support from MCIN/AEI/10.13039/501100011033 through Project Ref. No. FIS2017-87363-P. Á.N. acknowledges financial support from MCIN/AEI/10.13039/501100011033 and “ESF Investing in your Future” through Project Ref. No. BES-2017-080073. Á.N., R.E., and J.A. acknowledge financial support from MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” through Project Ref. No. PID2022-139579NB-L00. M.M.F., Á.N., J.J.M.V., R.E., J.A. and G.M.T. acknowledgefinancial suport from the Department of Education, Research and Universities of the Basque Government through Project Ref. No. IT 1526-22. M.M.F., J.L.A., I.G.V., J.J.M.V. and G.M.T. acknowledge financial support from CSIC Research Platform PTI-001. M.B.B. acknowledges financial support from MCIN/AEI/10.13039/501100011033 through Project Ref. No. MDM-2016-0618. J.O.T. acknowledges financial support from MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR through the Juan de la Cierva Fellowship Ref. No. FJC2021-047090-I, and from MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” through Project Ref. No. PID-2022-137569NBC43. C.L. acknowledges financial support from MCIN/AEI/10.13039/501100011033 through Project Ref. No. PID2021-124814NB-C21., The data used for the figures and results in this article can be found at the digital.csic.es repository http://hdl.handle.net/10261/339860, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlling the spectral persistence of a random laser

  • Moronta, Pedro
  • Tartaj, Pedro
  • Consoli, Antonio
  • García Fernández, Pedro David
  • Martín-Moreno, Luis
  • López, Cefe
The data that support the plots within this paper are available from the corresponding author upon reasonable request., Random lasers represent a relatively undemanding technology for generating laser radiation that displays unique characteristics of interest in sensing and imaging. Furthermore, they combine the classical laser’s nonlinear response with a naturally occurring multimode character and easy fabrication, explaining why they have been recently proposed as ideal elements for complex networks. The typical configuration of a random laser consists of a disordered distribution of scattering centers spatially mixed into the gain medium. When optically pumped, these devices exhibit spectral fluctuations from pulse to pulse or constant spectra, depending on the pumping conditions and sample properties. Here, we show clear experimental evidence of the transition from fluctuating (uncorrelated) to persistent random laser spectra, in devices in which the gain material is spatially separated from the scattering centers. We interpret these two regimes of operation in terms of the number of cavity round trips fitting in the pulse duration. Only if the cavity round-trip time is much smaller than the pulse duration are modes allowed to interact, compete for gain, and build a persisting spectrum. Surprisingly this persistence is achieved if the pumping pulse is long enough for radiation in the cavity to perform some 10 round trips. Coupled-mode theory simulations support the hypothesis. These results suggest an easy yet robust way to control mode stability in random lasers and open the pathway for miniaturized systems, as, for example, signal processing in complex random laser networks., Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación (PDC2022-133418-I00, PID2020-115221GB-C41, PID2021-124814NB-C21); Gobierno de Aragón (ERDF A way of Making Europe, Q-MAD); Comunidad de Madrid (S2018/NMT-4291); Consejo Superior de Investigaciones Científicas (CSIC134E-1794)., P.M. acknowledges the FPI contract PRE2019-091452 funded by MICIU/AEI and FSE “invierte en tu futuro.” PDC2022-133418-I00 is funded by MICIU/AEI and the EU Next Generation EU/PRTR. PID2020-115221GB-C41 is funded by MICIU/AEI. PID2021-124814NB-C21 is funded by MICIU/AEI and by FEDER UE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optomechanical Coupling Optimization in Engineered Nanocavities

  • Edelstein, Shulamit
  • Gomis-Bresco, J.
  • Arregui, Guillermo
  • Koval, Peter
  • Lanzillotti-Kimura, Norberto Daniel
  • Torrent, Daniel
  • Sotomayor Torres, C. M.
  • García Fernández, Pedro David
In optomechanics, the interaction between light and matter is enhanced by engineering cavities where the electromagnetic field and the mechanical displacement are confined simultaneously within the same volume. This leads to a wide range of interesting phenomena, such as optomechanically induced transparency and the cooling of macroscopic objects to their lowest possible motion state. In this manuscript, the focus is on designed optomechanical cavities exploiting heterostructures in air-slot photonic-crystal waveguides, incorporating different hole shapes and dimensions to engineer and control their optomechanical properties. The aim is to maximize the optical quality factor of the optical cavity, while ensuring optical mode volumes below the diffraction limit. These optimized optical modes interact with in-plane motional degrees of freedom of the structures achieving high optomechanical coupling rates, thus opening up the possibility of mechanical amplification, nonlinear dynamics and chaos through the optomechanical back-action., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (SEV-2017-0706), This work was supported by the Spanish Minister of Science, Innovation and Universities via the Severo Ochoa Program (Grant no. SEV-2017-0706), as well as by the CERCA Program/Generalitat de Catalunya and the EU-H2020 FET Proactive project TOCHA (no. 824140). P.D.G. gratefully acknowledges the support by the national project PID2021-124814NB-C21 (SPHAM) and the HORIZON-EIC-2022 pathfinder project NEUROPIC (Grant no. 101098961). D.T. acknowledged the support by the HORIZON-EIC-2021 pathfinder project DYNAMO (Grant no. 101046489). C.M.S.T acknowledged the support of the national project SIP (Grant no. PGC2018-104333-BI00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mie scattering based measurements of the optical size of single spherical dielectric microparticles

  • Tribaldo, Isaac
  • Molezuelas-Ferreras, Martín
  • Cifuentes, Ángel
  • López, Cefe
  • Fenollosa, Roberto
  • Molina-Terriza, Gabriel
The scattering of light by dielectric particles has significant implications for fields such as atmospheric science, optical sensing, and material characterization. We present an experimental study of the backscattered spectra of different dielectric materials, employing tightly focused Laguerre–Gaussian beams as incident light. Analysis of the experimental data allows us to determine the optical size of the measured spheres. Due to the extended wavelength range used in the experiments, the influence of the dispersion of the refractive index is also studied, unveiling that the oscillatory behavior of the spectra is related to the group velocity of the material. Circularly polarized Laguerre–Gaussian beams with different topological charges are also employed to probe the scattering process. We evaluated the limitations of the method depending on the particle sizes. We also compare some similarities of our analysis with the theory of cavities., I.T., M.M.-F., A.C., and G.M.-T. acknowledge the support from CSIC Research Platform on Quantum Technologies Grant No. PTI-001, from IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and DIPC/MPC on behalf of the Department of Education of the Basque Government, and from Project No. PID2022-143268NBI00 of Ministerio de Ciencia, Innovación y Universidades. M.M.-F. also acknowledges the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades through the FPI PhD Fellowship, Grant No. FIS-2017-87363-P. R.F. acknowledges the support of Grant No. PID2021-123163OB-I00 and Grant No. CEX2021-001230-S (Severo Ochoa Center of Excellence program) projects of the Spanish Ministerio de Ciencia, Innovación y Universidades. C.L. acknowledges the financial support from Grant No. PID2021-124814NB-C21 funded by MCIN/AEI/10.13039/501100011033/., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dichroism of coupled multipolar plasmonic modes in twisted triskelion stacks

  • Rodríguez-Álvarez, Javier
  • Vila, Joan
  • García-Martín, Antonio
  • Guerrero, Albert
  • Borrisé, Xavier
  • Perez Murano, Francesc X.
  • David, Christian
  • Blanco Montes, Álvaro
  • Pecharromán, Carlos
  • Terradas-Batlle, Xavier
  • Fraile Rodríguez, Arantxa
  • Labarta, Amilcar
We present a systematic investigation of the optical response to circularly polarized illumination in twisted stacked plasmonic nanostructures. The system consists in two identical, parallel gold triskelia, centrally aligned and rotated at a certain angle relative to each other. Sample fabrication was accomplished through a novel multilevel high-resolution electron beam lithography. This stack holds two plasmonic modes of multipolar character in the near-infrared range, showing a strong dependence of their excitation intensities on the handedness of the circularly polarized incident light. This translates into a large circular dichroism which can be modulated by adjusting the twist angle of the stack. Fourier-transform infrared (FTIR) spectroscopy and numerical simulations were employed to characterize the spectral features of the modes. Remarkably, in contrast to previous results in other stacked nanostructures, the system's response exhibits a behavior analogous to that of two interacting dipoles only at small angles. As the angle approaches 15°, where maximum dichroism is observed, more complex modes of the stack emerge. These modes evolve towards two in-phase multipolar excitations of the two triskelia as the angle increases up to 60°. Finally, simulations for a triangular array of such stacked elements show a sharp mode arising from the hybridization of a surface lattice resonance with the low-energy mode of the stack. This hybridized mode demonstrates the capability to be selectively switched on and off through the light polarization handedness., Financial support from the Spanish Ministry of Science and Innovation (PID2021-127397NB-I00, PID2021-124814NB-C21), the European Union FEDER funds, and the Generalitat de Catalunya (2021SGR00328) is acknowledged. Support through the Maria de Maeztu grant CEX2023-001397-M funded by MICIU/AEI/10.13039/501100011033 is acknowledged., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2023-001397-M), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lattice variation upon water adsorption in silica opals measured by in situ atomic force microscopy

  • Gallego-Gómez, Francisco
  • Berganza, Eider
  • Morales, Miguel
  • Blanco Montes, Álvaro
  • López, Cefe
  • Asenjo Barahona, Agustina
  • Jaafar, Miriam
Colloidal photonic crystals, or artificial opals, derive their unique optical properties from the periodic arrangement of their constituent particles. Central to the functionality of these materials is the precise control over their lattice parameter, which directly determines the photonic bandgap. Adsorption of environmental vapors may have a significant impact on the photonic response, most of which has been attributed to lattice variations. Here we aim to directly measure the arrangement and lattice parameter in opals made of silica spheres by using in situ atomic force microscopy (AFM) under changing ambient conditions. The periodicity of the opal structure offers a decisive advantage for such study, enabling the use of correlation tools for image processing. Opals having high mechanical stability (avoiding lattice distortions or sphere detachment during scanning) allow reliable AFM data and good analytical resolution. We show direct evidence of reversible lattice increments upon water adsorption, up to several nanometres in agreement with prior indirect estimates, which is compatible with swelling of the spheres due to filling of silica micropores. © 2025 RSC., This work was partially funded by the Spanish Ministry of In-novation and Science MCIN/ AEI/10.13039/501100011033 under projects PID2021-124814NB-C21, PID2021-123295NB-I00 and PID2022-138169OB-I00. E. B. acknowledges support of the Spanish Ministry of Innovation and Science in the form of a Ramón y Cajal fellowship, with the reference RYC2022-036514-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rough Fabry–Perot cavity: a vastly multi-scale numerical problem

  • Slipchenko, Tetiana
  • Abad-Arredondo, J.
  • Consoli, A.
  • García Vidal, F.J.
  • Fernández-Domínguez, A.I.
  • García Fernández, Pedro David
  • López, Cefe
A commercial Fabry–Perot laser diode is characterized by highly disproportionate dimensions, which poses a significant numerical challenge, even for state-of-the-art tools. This challenge is exacerbated when one of the cavity mirrors is roughened, as is the case when fabricating random laser diodes. Such a system involves length scales from several hundred micrometres (length) to a few nanometres (roughness) all of which are relevant when studying optical properties in the visible. While involving an extreme range of dimensions, these cavities cannot be treated through statistical approaches such as those used with self-similar fractal structures known to show well-studied properties. Here we deploy numerical methods to compute cavity modes and show how random corrugations of the Fabry–Perot cavity wall affect statistical proper-ties of their spectral features. Our study constitutes a necessary first step in developing technologically essential devices for photonic computation and efficient speckle-free illumination. © 2025 the author(s), published by De Gruyter, Berlin/Boston., This work has received funding from MICIU Grants Ref. PID2021-124814NB-C21, PID2021-126964OB-I00, PID2021-127968NB-I00, and PDC2022-133418-I00. TS, AC, PDG, and CL acknowledge support from the Spanish MICIU Severo Ochoa program for Centres of Excellence through grant CEX2024-001445-S. JBA, FJGV and AIFD acknowledge funding from the María de Maeztu program for Units of Excellence in R&D through grant CEX2023-001316-M., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A self-assembled two-dimensional hypersonic phononic insulator

  • Moronta, Pedro
  • Sathyan, Sandeep
  • Cardozo de Oliveira, Edson R.
  • Jiménez-Riobóo, Rafael J.
  • Lanzillotti-Kimura, Norberto Daniel
  • García Fernández, Pedro David
  • López, Cefe
The coupling between the electromagnetic field and the motional degrees of freedom of a nanoscale object offers an interesting control-knob for light–matter interaction. However, this interaction is rather weak so, in general, a precise control over the mechanical vibrations of the object becomes desirable for enhancing and fine-tuning this coupling. Phonon insulation is a base-line to achieve nanoscale vibration control by inducing constructive and destructive phonon interference, which opens phononic band gaps at various frequencies. Phonon insulators are essential for managing and directing mechanical vibrations in advanced mechanical systems, such as resonators and acousto-optic modulators. Conventional fabrication methods, such as electron-beam lithography, are highly robust and efficient but also very demanding and limited in accessibility due to their cost and technical requirements. Self-assembly offers an alternative route for fabricating mechanical structures from diverse materials, allowing for innovative designs with improved functionalities. By using natural self-organizing processes, production is simplified and accelerated, with components assembling automatically in a low-cost, scalable manner. Here, we present a simple self-assembled device that functions as a phonon insulator in the GHz frequency range and can be easily integrated onto silicon. This integration opens the door to a wide range of applications, including optical communication, quantum computing, and ultra-sensitive sensors, where efficient control over mechanical vibrations is vital., This work has received funding from Grant Ref. PID2021-124814NB-C21 and PID2021-127033OB-C21 funded by MCIN/AEI/10.13039/501100011033 and the European Union and Ministerio de Asuntos Económicos y Transformación Digital, Gobierno de España (CSIC13-4E-1794) and Dirección General de Universidades e Investigación (S2018/NMT-4291). SS, ECDO, and NDLK acknowledge funding by the European Research Council Consolidator Grant No. 101045089 (T-Recs). PM, RJJ, PDG, and CL acknowledge support from the Spanish MICIU Severo Ochoa program for Centres of Excellence through Grant CEX2024-001445-S. PM acknowledges FPI grant PRE2019-091452. We acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Foams-Induced Hierarchy for Multiscale Photonics on Flat Substrates: Lasing and Mie-Bragg Diffraction as Case Studies.

  • Forzani, Luisina
  • Tartaj, Pedro
  • Luengo, Yurena
  • Dalmis, Ramazan
  • Moronta, Pedro
  • Blanco Montes, Álvaro
  • López, Cefe
Densely packed arrays of monodisperse dielectric spheres exhibit strong optical diffraction down to the single-layer limit, making them highly attractive for the implementation of order- and disorder-based functionalities in photonic devices. Colloidal techniques are among the most convenient methods for creating these densely packed arrays, performing well on flat substrates. However, forming complex geometries with colloidal techniques usually requires patterned substrates and postprocessing routes. Here, a facile colloidal route capable of producing a complex configuration with two levels of functionality is described. Specifically, by foaming and casting colloidal suspensions of monodisperse spherical particles, both ordered and disordered arrays of densely packed spheres on unpatterned flat substrates are achieved. These arrays outline a complex cellular configuration consisting of a ridge-trough network structure that supports random lasing action at the macroscale, while enabling Bragg diffraction (order) or Mie scattering (disorder) across the visible and near-infrared spectral ranges at the microscale. Notably, the optical properties of the disordered foams can be effectively modeled using Mie calculations for individual spheres, serving as a valuable proof of concept for developing particulate portable detectors based on Mie resonances and a hierarchical configuration built upon a simple self-assembly process carried out on flat substrates., This work has received funding from MCIN Grant Ref. PID2021-124814NB-C21. R.D. acknowledges funding for a post-doc scholarship from TUBITAK (The Scientific and Technological Research Council of Türkiye, 2219) through grant 1059B192202799. P.M. acknowledges FPI grant PRE2019-091452. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The 2024 phononic crystals roadmap

  • Jin, Yabin
  • Torrent, Daniel
  • Rouhani, Bahram Djafari
  • He, Liangshu
  • Xiang, Yanxun
  • Xuan, Fu Zhen
  • Gu, Zhongming
  • Xue, Haoran
  • Zhu, Jie
  • Wu, Qian
  • Huang, Guoliang
  • García Fernández, Pedro David
  • Arregui, Guillermo
  • Chen, Yi
  • Guenneau, Sébastien
  • Wegener, Martin
  • Kadic, Muamer
  • Liu, Yongquan
  • Li, Jensen
  • Wang, Yue Sheng
  • Palermo, Antonio
  • Romero-García, V.
  • Kuznetsova, S.
  • Cheron, I.
  • Lázaro Navarro, M.
  • Groby, J. P.
  • Pagneux, V.
  • Félix, S.
  • Garcia-Raffi, L. M.
  • Hu, Gengkai
  • Cai, Runcheng
  • Rabczuk, Timon
  • Zhuang, Xiaoying
  • Gao, Penglin
  • Qu, Yegao
  • Hussein, Mahmoud I.
  • Nomura, Masahiro
  • Pennec, Yan
  • Cai, Feiyan
  • Li, Xinwei
  • Zhai, Wei
Over the past 3 decades, phononic crystals experienced revolutionary development for understanding and utilizing mechanical waves by exploring interaction between mechanical waves and structures. With the significant advances in manufacture technologies from nanoscale to macroscale, phononic crystals attract researchers from diverse disciplines to study abundant directions such as bandgaps, dispersion engineering, novel modes, reconfigurable control, efficient design algorithms and so on. The aim of this roadmap is to present the current state of the art, an overview of properties, functions and applications of phononic crystals, opinions on the challenges and opportunities. The various perspectives cover wide topics on basic property, homogenization, machine learning assisted design, topological, non-Hermitian, nonreciprocal, nanoscale, chiral, nonlocal, active, spatiotemporal, hyperuniform properties of phononic crystals, and applications in underwater acoustics, seismic wave protection, vibration and noise control, thermal transport, sensing, acoustic tweezers, written by over 40 renown experts. It is also intended to guide researchers, funding agencies and industry in identifying new prospects for phononic crystals in the upcoming years., We acknowledge the funding by the MOE AcRF Tier 1 Grant (Project No. WBS A-8002418-00-00)., This publication is part of the Project PID2021-124814NB-C22, funded by MCIN/AEI/10.13039/501100011033/‘FEDER A way of making Europe’., This work was supported by the National Key R&D Program of China (Grant Nos. 2022YFA1404400 and 2022YFA1404403), the National Natural Science Foundation of China (Grant Nos. 92263208 and 12304494), the Research Grants Council of Hong Kong SAR (Grant AoE/P-502/20), the Fundamental Research Funds for the Central Universities. H X acknowledges support from the start-up fund of The Chinese University of Hong Kong., This research has been funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy via the Excellence Cluster 3D Matter Made to Order (EXC-2082/1-390761711), the Carl Zeiss Foundation through the Carl-Zeiss-Foundation-Focus@HEiKA, by the State of Baden-Württemberg, and by the Karlsruhe Institute of Technology (KIT). We further acknowledge support by the Helmholtz program Materials Systems Engineering (MSE). We also thank for the support from ANR PNanoBot (ANR-21-CE33-0015) and ANR OPTOBOTS Project (ANR-21-CE33-0003)., We acknowledge support from the Croucher Foundation through Project CF23SC01, and the National Natural Science Foundation of China under Grant No. 12172271., V R-G and L M Garcia-Raffi acknowledge support from Project CIAICO/2022/052 of the ‘Programa para la promoción de la investigación científica, el desarrollo tecnológico y la innovación en la Comunitat Valenciana’. This publication is part of the R&D&I Projects/Grants Nos. PID2020-112759GB-I00 and PID2023-146237NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER, UE., The author acknowledges funding from the National Science Foundation (NDF) and the Defence Advanced Research Projects Agency (DARPA) through the CAREER and Young Faculty Award programs, respectively., This work is supported by the National Natural Science Foundation of China (12272267, 12025403, 12327807), the Young Elite Scientists Sponsorship Program by CAST (2021QNRC001), the Shanghai Science and Technology Committee (Grant Nos. 22JC1404100, 21JC1405600) and Shanghai Gaofeng Project for University Academic Program Development., This work is supported by the Air Force Office of Scientific Research under Grant No. 297 AF9550-20-1-0279 with Program Manager Dr Byung-Lip (Les) Lee., This work was supported by the national Project PID2021-124814NB-C21 (SPHAM) and the HORIZON-EIC-2022 pathfinder Project NEUROPIC (Grant No. 101098961)., Support from National Natural Science Foundation of China (Grant Nos. 12021002 and 11991031) is gratefully acknowledged., We acknowledge the Alexander von Humboldt Foundation and the National Natural Science Foundation of China (Grant Nos. 11632003, 11972083, 11991030) for financial support., Masahiro Nomura acknowledges financial support by JSPS KAKENHI (Grant Nos. 21H04635 and 20H05649) and JST MIRAI (Grant No. JPMJMI19A1)., This work was supported by the National Key R&D Program of China (No. 2021YFB3801802) and the Shenzhen Science and Technology Program (Grant No. RCJC20221008092808013)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlling the spectral persistence of a random laser

  • Moronta, Pedro
  • Tartaj, Pedro
  • Consoli, Antonio
  • David García, Pedro
  • Martín Moreno, Luis
  • López, Cefe
Random lasers represent a relatively undemanding technology for generating laser radiation that displays unique characteristics of interest in sensing and imaging. Furthermore, they combine the classical laser’s nonlinear response with a naturally occurring multimode character and easy fabrication, explaining why they have been recently proposed as ideal elements for complex networks. The typical configuration of a random laser consists of a disordered distribution of scattering centers spatially mixed into the gain medium. When optically pumped, these devices exhibit spectral fluctuations from pulse to pulse or constant spectra, depending on the pumping conditions and sample properties. Here, we show clear experimental evidence of the transition from fluctuating (uncorrelated) to persistent random laser spectra, in devices in which the gain material is spatially separated from the scattering centers. We interpret these two regimes of operation in terms of the number of cavity round trips fitting in the pulse duration. Only if the cavity round-trip time is much smaller than the pulse duration are modes allowed to interact, compete for gain, and build a persisting spectrum. Surprisingly this persistence is achieved if the pumping pulse is long enough for radiation in the cavity to perform some 10 round trips. Coupled-mode theory simulations support the hypothesis. These results suggest an easy yet robust way to control mode stability in random lasers and open the pathway for miniaturized systems, as, for example, signal processing in complex random laser networks.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Assembly of Covalent Organic Frameworks into Colloidal Photonic Crystals

  • Fonseca García, Javier|||0000-0001-5528-4504
  • Meng, Lingxin
  • Moronta, Pedro
  • Imaz, Inhar|||0000-0002-0278-1141
  • López, Cefe|||0000-0001-5635-4463
  • Maspoch, Daniel|||0000-0003-1325-9161
Self-assembly of colloidal particles into ordered superstructures is an important strategy to discover new materials, such as catalysts, plasmonic sensing materials, storage systems, and photonic crystals (PhCs). Here we show that porous covalent organic frameworks (COFs) can be used as colloidal building particles to fabricate porous PhCs with an underlying face-centered cubic (fcc) arrangement. We demonstrate that the Bragg reflection of these can be tuned by controlling the size of the COF particles and that species can be adsorbed within the pores of the COF particles, which in turn alters the Bragg reflection. Given the vast number of existing COFs, with their rich properties and broad modularity, we expect that our discovery will enable the development of colloidal PhCs with unprecedented functionality.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optomechanical Coupling Optimization in Engineered Nanocavities

  • Edelstein, S.
  • Gomis-Bresco, Jordi|||0000-0002-6066-7064
  • Arregui Bravo, Guillermo|||0000-0002-6458-5277
  • Koval, P.
  • Lanzillotti-Kimura, N.D.
  • Torrent, D.
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • García Fernández, Pedro David|||0000-0002-3422-178X
In optomechanics, the interaction between light and matter is enhanced by engineering cavities where the electromagnetic field and the mechanical displacement are confined simultaneously within the same volume. This leads to a wide range of interesting phenomena, such as optomechanically induced transparency and the cooling of macroscopic objects to their lowest possible motion state. In this manuscript, the focus is on designed optomechanical cavities exploiting heterostructures in air-slot photonic-crystal waveguides, incorporating different hole shapes and dimensions to engineer and control their optomechanical properties. The aim is to maximize the optical quality factor of the optical cavity, while ensuring optical mode volumes below the diffraction limit. These optimized optical modes interact with in-plane motional degrees of freedom of the structures achieving high optomechanical coupling rates, thus opening up the possibility of mechanical amplification, nonlinear dynamics and chaos through the optomechanical back-action.